Desulfurization of 2,4,6,8-tetraethyl dibenzothiophene by recombinant Mycobacterium sp. strain MR65

Recombinant Mycobacterium sp. strain MR65 harboring dszABCD genes was used to desulfurize alkyl dibenzothiophenes (C_x-DBTs) in n-hexadecane. The specific desulfurization activity for 2,4,6,8-tetraethyl DBT (C₈-DBT) by DszC enzyme was about twice that for 4,6-dipropyl DBT (C₆-DBT). However, the degradation rate of 2,4,6,8-tetraethyl DBT in n-hexadecane by resting cells of strain MR65 was only about 40% of that of 4,6-dipropyl DBT. These results indicated that the desulfurization ability for Cx-DBTs by resting cells depends on carbon number substituted at positions 4 and 6 and that the rate-limiting step in the desulfurization reaction of highly alkylated C_x-DBTs is the transfer process from the oil phase into the cell.     

Desulfurization of various organic sulfur compounds and the mixture of DBT + 4,6-DMDBT by Mycobacterium sp. ZD-19

A new isolated dibenzothiophene (DBT) desulfurizing bacterium, identified as Mycobacterium sp. ZD-19 can utilize a wide range of organic sulfur compounds as a sole sulfur source. Thiophene (TH) or benzothiophene (BTH) was completely degraded by strain ZD-19 within 10h or 42 h, and 100% DBT or 4,6-dimethyldibenzothiophene (4,6-DMDBT) was removed within 50h or 56 h, respectively. Diphenylsulfide (DPS) possessed the lowest desulfurization efficiencies with 60% being transformed within 50h and 80% at 90 h. The desulfurization activities of five substrates by resting cells are in order of TH>BTH>DPS>DBT>4,6-DMDBT. In addition, when DBT and 4,6-DMDBT were mixed, they could be simultaneously desulfurized by strain ZD-19. However, DBT appeared to be attacked prior to 4,6-DMDBT. The desulfurization rate of DBT or 4,6-DMDBT in mixture is lower than they are desulfurized separately, indicating that the substrate competitive inhibition is existent when DBT and 4,6-DMDBT are mixed.     

Removal of sulfur-containing organic molecules adsorbed on inorganic supports by <Emphasis Type="Italic">Rhodococcus Rhodochrous</Emphasis> spp.

Objective

To remove dibenzothiophene (DBT) and 4,6-dimethyl-dibenzothiophene (4,6-DMDBT) adsorbed on alumina, silica and sepiolite through biodesulfurization (BDS) using Rhodococcus Rhodochrous spp., that selectively reduce sulfur molecules without generating of gaseous pollutants.

Results

The adsorption of DBT and 4,6-DMDBT was affected by the properties of the supports, including particle size and the presence of surface acidic groups. The highest adsorption of both sulfur-containing organic molecules used particle sizes of 0.43–0.063 mm. The highest percentage removal was with sepiolite (80 % for DBT and 56 % for 4,6-DMDBT) and silica (71 % for DBT and 37 % for 4,6-DMDBT). This is attributed to the close interaction between these supports and the bacteria.

Conclusions

Biodesulfurization is effective for removing the sulfur-containing organic molecules adsorbed on inorganic materials and avoids the generation of gaseous pollutants.

     

Desulfurization of dibenzothiophene by lyophilized cells of Pseudomonas delafieldii R-8 in the presence of dodecane

Several parameters that influence the dibenzothiophene (DBT) desulfurization by lyophilized cells of Pseudomonas delafieldii R-8 were studied in the presence of dodecane. The aqueous media tested with pH range in 4.6–8.5 made no obvious difference on the desulfurization activity. The rate and extent of desulfurization were strongly dependent on the volume ratio of oil-to-water, DBT concentration and the cell concentration. The specific desulfurization rate of DBT and 4,6-dimethyl DBT (4,6-DMDBT) could reach 11.4 and 9.4 mmol sulfur kg⁻¹ dry cells (DCW) h⁻¹, respectively. The desulfurization pattern of DBT was represented by the Michaelis–Menten equation. The kinetic parameters, the limiting maximal velocity (V_max) and Michaelis constant (K_m), for desulfurization of DBT were calculated.     

Enhanced biodesulfurization by expression of dibenzothiophene uptake genes in <Emphasis Type="Italic">Rhodococcus erythropolis</Emphasis>

The transfer of dibenzothiophene (DBT) and its derivatives into cells is a critical step for biodesulfurization. The desulfurization reactions of resting cells and cell lysate were studied, which showed that the desulfurization rate of DBT, especially 4, 6-dimethyldibenzothiophene (4, 6-DMDBT) in Rhodococcus erythropolis LSSE8-1 was seriously affected by the transfer into cells. The inhibited effect of NaN₃ on desulfurization reactions was studied, which confirmed that the transfer of DBT into cells was an active transport in R. erythropolis LSSE8-1. The uptake-genes of DBT and its derivatives (HcuABC) of Pseudomonas delafieldii R-8 were introduced into the specific desulfurization bacterium, R. erythropolis LSSE8-1. Compared with the wild type, the strains bearing HcuABC genes showed a higher desulfurization activity. The desulfurization ratio of DBT showed a 19% increase, and 13% increase of 4, 6-DMDBT.     

Methoxylation pathway in biodesulfurization of model organosulfur compounds with Mycobacterium sp.

A metabolic pathway for the biodesulfurization of model organosulfur compounds e.g., dibenzothiophene (DBT), is proposed. This pathway, defined as extended 4S pathway, incorporates the traditional 4S pathway with the methoxylation pathway from 2-hydroxybiphenyl (HBP) to 2-methoxybiphenyl (2-MBP). The formation of 2-MBP was confirmed by the gas chromatography–mass spectrometry (GC–MS) analysis. A similar pathway was also obtained in the desulfurization of 4,6-dimethyldibenzothiophene (4,6-DMDBT), confirming the methoxylation reaction in the desulfurization process by the Mycobacterium sp. strain. Compared with 2-HBP, 2-MBP has much slighter inhibition effect on the cell growth and desulfurization activity. Thus, the methoxylation pathway from 2-HBP to 2-MBP would make less inhibitory effect on the microbe. The new pathway with 2-MBP as the end product may be an alternative for the further desulfuration of the fossil fuels.     

Deep desulfurization of hydrodesulfurization-treated diesel oil by a facultative thermophilic bacterium Mycobacterium sp. X7B

The dibenzothiophene (DBT) desulfurization pathway of a facultative thermophilic bacterium Mycobacterium sp. X7B was investigated. Metabolites were identified by gas chromatography-mass spectrometry, and the results showed that 2-hydroxybiphenyl, the end product of the previously reported sulfur-specific pathway (also called 4S pathway), was further converted to 2-methoxybiphenyl. This is the first strain to possess this ability and therefore, an extended 4S pathway was determined. In addition, the DBT-desulfurizing bacterium Mycobacterium sp. X7B was able to grow on DBT derivatives such as 4-methylDBT and 4,6-dimethylDBT. Resting cells could desulfurize diesel oil (total sulfur, 535 ppm) after hydrodesulfurization. GC flame ionization detection and GC atomic emission detection analyses were used to qualitatively evaluate the effect of Mycobacterium sp. X7B treatment on the content of the diesel oil. The total sulfur content of the diesel oil was reduced 86% using resting cell biocatalysts for 24 h at 45 degrees C.     

脱硫菌Fds-1的分离鉴定及其对柴油脱硫特性的研究

从含硫土壤中分离筛选出一株专一性脱硫菌Fds-1,经生理生化指标和16S rRNA序列分析鉴定其属于枯草芽孢杆菌(Bacillus subtilis)。用Gibb’s试剂显色和气相色谱-质谱联用分析表明,该菌株通过“4S”途径脱除有机硫。实验发现Fds-1的最佳脱硫活性在30℃,在此温度下72h内能脱除约0.5mmol/L DBT中的有机硫。Fds-1菌株对有机硫化合物的利用情况和柴油脱硫前后烃组分比较都进一步证明该菌株适合于柴油生物脱硫。利用休止细胞对不同组分柴油的脱硫研究表明,脱硫菌株Fds-1对精制柴油中的DBT类化合物的降解能力强。因此,该菌株对精制低硫柴油的深度脱硫具有应用意义。     

Kinetic analysis of microbial desulfurization of model and light gas oils containing multiple alkyl dibenzothiophenes

The reaction mechanism of biodesulfurization was investigated using whole cells of Rhodococcus erythropolis KA2-5-1, which have the ability to convert dibenzothiophene (DBT) into 2-hydroxybiphenyl. The desulfurization patterns of alkyl DBTs were represented by the Michaeis-Menten equation. The values of rate constants, the limiting maximal velocity (Vmax) and Michaelis constant (Km), for desulfurization of alkyl DBTs were calculated. The relative desulfurization activities of various alkyl DBTs were reduced in proportion to the total carbon numbers of alkyl substituent groups. Alkyl DBTs that had a total of six carbons of alkyl substituent groups were not desulfurized. The type or position of alkyl substituent groups had little effect on desulfurization activity. The desulfurization activity of each alkyl DBT, when mixed together, was reduced. This phenomenon was caused by apparent competitive inhibition of substrates. Using the apparent competitive inhibition model, the desulfurization pattern of a multiple components system containing alkyl DBTs was elucidated. This model was also applicable for biodesulfurization of light gas oil.     

Microbial desulfurization of alkylated dibenzothiophenes from a hydrodesulfurized middle distillate by Rhodococcus erythropolis I-19.

Rhodococcus erythropolis I-19, containing multiple copies of key dsz genes, was used to desulfurize alkylated dibenzothiophenes (Cx-DBTs) found in a hydrodesulfurized middle-distillate petroleum (MD 1850). Initial desulfurization rates of dibenzothiophene (DBT) and MD 1850 by I-19 were 5.0 and 2.5 micromol g dry cell weight(-1) min(-1), more than 25-fold higher than that for wild-type bacteria. According to sulfur K-edge X-ray absorption near-edge structure (XANES) analysis, thiophenic compounds accounted for >95% of the total sulfur found in MD 1850, predominantly Cx-DBTs and alkylated benzothiophenes. Extensive biodesulfurization resulted in a 67% reduction of total sulfur from 1,850 to 615 ppm S. XANES analysis of the 615-ppm material gave a sulfur distribution of 75% thiophenes, 11% sulfides, 2% sulfoxides, and 12% sulfones. I-19 preferentially desulfurized DBT and C1-DBTs, followed by the more highly alkylated Cx-DBTs. Shifting zero- to first-order (first-order) desulfurization rate kinetics were observed when MD 1850 was diluted with hexadecane. Apparent saturation rate constant (K(0)) and half-saturation rate constant (K(1)) values were calculated to be 2.8 micromol g dry cell weight(-1) min(-1) and 130 ppm, respectively. However, partial biocatalytic reduction of MD 1850 sulfur concentration followed by determination of initial rates with fresh biocatalyst led to a sigmoidal kinetic behavior. A competitive-substrate model suggested that the apparent K(1) values for each group of Cx-DBTs increased with increasing alkylation. Overall desulfurization rate kinetics with I-19 were affected by the concentration and distribution of Cx-DBTs according to the number and/or lengths of alkyl groups attached to the basic ring structure.     

Comparison of the substrate specificity of the two bacterial desulfurization systems

Using cell-free extracts of a desulfurizing mesophile, Rhodococcus erythropolis KA2-5-1 (the Dsz system) and Escherichia coli JM109, which possesses the desulfurizing genes of a thermophile Paenibacillus sp. A11-2 (the Tds system), the reactivity of desulfurizing enzymes toward 4,6-dialkyl dibenzothiophenes (4,6-dialkyl DBTs) and 7-alkyl benzothiophenes (7-alkyl BTs) was investigated. Both systems desulfurized all the 4,6-dialkyl DBTs, except 4,6-dibutyl DBT. Although some alkylated BTs were degraded by the Dsz system, no desulfurized compounds were detected. The reactivity of the Tds system toward alkylated BTs was higher than that of DBT. In contrast to the Dsz system, the Tds system yielded desulfurized compounds from all of the alkylated BTs examined.     

红球菌Rhodococcus sp.DS-3 dszABC基因和dszD基因在大肠杆菌中的共表达

二苯并噻吩(DBT)及其衍生物微生物脱硫的4S途径需要4个酶(DszA,DszB,DszC and DszD)参与催化。其中DBT单加氧酶(DszC or DBT-MO)和DBT-砜单加氧酶(DszA or DBTO2-MO)都是黄素依赖型氧化酶,它们的催化反应需要菌体中还原型的黄素单核苷酸(FMNH2),FMNH2由辅酶黄素还原酶(DszD)再生。因此,共表达DszA,DszB,DszC和DszD可以提高整个脱硫途径的速率。构建了两个不相容性表达载体pBADD和paN2并在大肠杆菌中实现了4个脱硫酶基因的共表达。DszA,DszB,DszC和DszD的可溶性蛋白表达量分别占菌体总蛋白质的7.6%,3.5%,3.1%和18%。共表达时的脱硫活性是单独用paN2表达时的5.4倍,并对工程菌休止细胞脱除模拟柴油中DBT的活性进行了研究。     

Thermophilic Biodesulfurization of Various Heterocyclic Sulfur Compounds and Crude Straight-Run Light Gas Oil Fraction by a Newly Isolated Strain Mycobacterium phlei WU-0103

Various heterocyclic sulfur compounds such as naphtho[2,1-b]thiophene (NTH) and benzo[b]thiophene (BTH) derivatives can be detected in diesel oil, in addition to dibenzothiophene (DBT) derivatives. Mycobacterium phlei WU-0103 was newly isolated as a bacterial strain capable of growing in a medium with NTH as the sulfur source at 50°C. M. phlei WU-0103 could degrade various heterocyclic sulfur compounds, not only NTH and its derivatives but also DBT, BTH, and their derivatives at 45°C. When M. phlei WU-0103 was cultivated with the heterocyclic sulfur compounds such as NTH, NTH 3,3-dioxide, DBT, BTH, and 4,6-dialkylDBTs as sulfur sources, monohydroxy compounds and sulfone compounds corresponding to starting heterocyclic sulfur compounds were detected by gas chromatography–mass spectrometry analysis, suggesting the sulfur-specific desulfurization pathways for heterocyclic sulfur compounds. Moreover, total sulfur content in 12-fold-diluted crude straight-run light gas oil fraction was reduced from 1000 to 475 ppm S, with 52% reduction, by the biodesulfurization treatment at 45°C with growing cells of M. phlei WU-0103. Gas chromatography analysis with a flame photometric detector revealed that most of the resolvable peaks, such as those corresponding to alkylated derivatives of NTH, DBT, and BTH, disappeared after the biodesulfurization treatment. These results indicated that M. phlei WU-0103 may have a good potential as a biocatalyst for practical biodesulfurization of diesel oil.     

Improved biodesulfurization of hydrodesulfurized diesel oil using Rhodococcus erythropolis and Gordonia sp.

Substituted benzothiophenes (BTs) and dibenzothiophenes (DBTs) remain in diesel oil following conventional desulfurization by hydrodesulfurization. A mixture of washed cells (13.6 g dry cell wt l⁻¹) of Rhodococcus erythropolis DS-3 and Gordonia sp. C-6 were employed to desulfurize hydrodesulfurized diesel oil; its sulfur content was reduced from 1.26 g l⁻¹ to 180 mg l⁻¹, approx 86% (w/w) of the total sulfur was removed from diesel oil after three cycles of biodesulfurization. The average desulfurization rate was 0.22 mg sulfur (g dry cell wt)⁻¹ h⁻¹. A bacterial mixture is therefore efficient for the practical biodesulfurization of diesel oil.     

Microbial Desulfurization of Alkylated Dibenzothiophenes from a Hydrodesulfurized Middle Distillate by Rhodococcus erythropolis I-19

Rhodococcus erythropolis I-19, containing multiple copies of key dsz genes, was used to desulfurize alkylated dibenzothiophenes (Cx-DBTs) found in a hydrodesulfurized middle-distillate petroleum (MD 1850). Initial desulfurization rates of dibenzothiophene (DBT) and MD 1850 by I-19 were 5.0 and 2.5 μmol g dry cell weight⁻¹ min⁻¹, more than 25-fold higher than that for wild-type bacteria. According to sulfur K-edge X-ray absorption near-edge structure (XANES) analysis, thiophenic compounds accounted for >95% of the total sulfur found in MD 1850, predominantly Cx-DBTs and alkylated benzothiophenes. Extensive biodesulfurization resulted in a 67% reduction of total sulfur from 1,850 to 615 ppm S. XANES analysis of the 615-ppm material gave a sulfur distribution of 75% thiophenes, 11% sulfides, 2% sulfoxides, and 12% sulfones. I-19 preferentially desulfurized DBT and C1-DBTs, followed by the more highly alkylated Cx-DBTs. Shifting zero- to first-order (first-order) desulfurization rate kinetics were observed when MD 1850 was diluted with hexadecane. Apparent saturation rate constant (K₀) and half-saturation rate constant (K₁) values were calculated to be 2.8 μmol g dry cell weight⁻¹ min⁻¹ and 130 ppm, respectively. However, partial biocatalytic reduction of MD 1850 sulfur concentration followed by determination of initial rates with fresh biocatalyst led to a sigmoidal kinetic behavior. A competitive-substrate model suggested that the apparent K₁ values for each group of Cx-DBTs increased with increasing alkylation. Overall desulfurization rate kinetics with I-19 were affected by the concentration and distribution of Cx-DBTs according to the number and/or lengths of alkyl groups attached to the basic ring structure.     

Mycobiota of Oil-Contaminated Soil Samples and Their Abilities for Dibenzothiophene Desulfurization

High sulfur content of crude oil leads to poor quality of oil products and many other negative consequences such as corrosion, catalyst poisoning and environmental pollution. Saudi Arabia is seeking to reduce sulfur content in diesel and gasoline to 10 ppm and to lower benzene content in gasoline to 1%. Biotechnological processes such as biodesulfurization can be considered an alternative or complement to conventional oil refining technologies. So, the objective of the present project is to isolate and identify endogenous fungal isolates capable of oil biodesulfurization. From 60 oil-contaminated soil samples collected from Saudi Arabia, 15 species belonged to 9 fungal genera were collected and identified morphologically and with ITS sequencing. Members of Aspergillus, Penicillium and Fusarium were the most prevalent in the investigated samples. Among the collected fungal species, only Stachybotrys bisbyiisolates were able to utilize dibenzothiophene (DBT) as the sole sulfur source. Stachybotrys bisbyi TUSb1 could desulfurize 99% of the DBT (0.3 mM) as the sulfur source by a co-metabolism reaction with other carbon sources through the same pathway as 4S (involves sequential oxidation of the sulfur part and cleaving of the C–S bonds), and produced 2-hydroxy biphenyl (2-HBP) during 7 days of incubation at 30°C and 180 rpm. Stachybotrys bisbyi TUSb1 showed broad specificity for removing sulfur in different sulfur-containing compounds.     

Cytology of SW Asian Chenopodiaceae: new data from Iran and a review of previous records and correlations with life forms and C<Subscript>4</Subscript> photosynthesis

The mitotic chromosome numbers of 35 species belonging to 25 genera from East Azerbaijan Province of Iran and meiotic numbers of five species of Salicornia from different parts of Iran of family Chenopodiaceae are reported. Some of them are first reports and some are first counts from Iran. Based on a review of previously published reports, 145 species and 46 genera occurring in SW Asia have been cytologically studied either based on populations within or surrounding regions. The nomenclature and generic position of all these species are updated based on recent phylogenetic and taxonomic studies. The polyploidy percentage of 26.2 % is beyond the average known in flowering plants, which is surprising for dominant plants of saline and desert ecosystems. The polyploidy of annual plants is only 16 % and that of perennials 19 %, respectively. It was found that C₄ plants represent lower polyploidy levels than C₃ plants. This is correlated by the fact that large number of annuals in the area is C₄ and secondly, polyploidy may constrain niche advantageous in C₄ plants. However, presence of different cytotypes in the widespread species is advantageous as they can occupy different niches. The basic chromosome numbers in chenopods is x = 9 with few derived exceptions in Spinacia (x = 6), Camphorosma (x = 6) and some species of Petrosimonia (x = 8).     

Heavy oils,principally long-chain n-alkanes secreted by Aureobasidium pullulans var. melanogenum strain P5 isolated from mangrove system

In this study, the yeast strain P5 isolated from a mangrove system was identified to be a strain of Aureobasidium pullulans var. melanogenum and was found to be able to secrete a large amount of heavy oil into medium. After optimization of the medium for heavy oil production and cell growth by the yeast strain P5, it was found that 120.0 g/l of glucose and 0.1 % corn steep liquor were the most suitable for heavy oil production. During 10-l fermentation, the yeast strain P5 produced 32.5 g/l of heavy oil and cell mass was 23.0 g/l within 168 h. The secreted heavy oils contained 66.15 % of the long-chain n-alkanes and 26.4 % of the fatty acids, whereas the compositions of the fatty acids in the yeast cells were only C_16:0 (21.2 %), C_16:1(2.8 %), C_18:0 (2.9 %), C_18:1 (39.8 %), and C_18:2 (33.3 %). We think that the secreted heavy oils may be used as a new source of petroleum in marine environments. This is the first report of yeast cells which can secrete the long-chain n-alkanes.     

Immobilized CALB Catalyzed Transesterification of Soybean Oil and Phytosterol

Candida antarctica lipase B (CALB) was immobilized on Fe₃O₄/SiO_x-g-P(GMA) polymer carrier to catalyzed the transesterification of soybean oil and phytosterol. The enzyme loading of the obtained particles was 98.7 mg/g supports and the enzyme activity was 1226.5 U/g. The average particle size was 100.5?±?1.30 nm and the magnetization was 15.80 emu/g. The immobilized enzyme showed higher activities at a wider range of pH and temperatures. Its optimum reaction temperature was up to 50 °C; increased by 5 °C compared to the free enzyme. The obtained magnetic immobilized Fe₃O₄/SiO_x-g-P(GMA) lipase was nanoscale. First-grade soybean oils were used as a substrate. System pH was adjusted to 7.0. The optimal reaction temperature was 50 °C and the reaction time was 3 h. The phytosterol concentration of 5% and immobilized CALB of 2% were obtained. The conversion rate of transesterification reaction between soybean oil and phytosterol was 86.2%. The use of magnets can quickly separate the immobilized enzymes from the substrates. The relative activity of the immobilized enzymes was 83.0% when reused seven times. The prepared immobilized CALB can improve efficiently enzyme activity and reutilization.     

Degradation of dibenzothiophene and its metabolite 3-hydroxy-2-formylbenzothiophene by an environmental isolate

Microbial degradation of dibenzothiophene (DBT) beyond 3-hydroxy-2-formylbenzothiophene (HFBT), a commonly detected metabolite of the Kodama pathway for DBT metabolism, and the catabolic intermediates leading to its mineralization are not fully understood. The enrichment cultures cultivated from crude oil contaminated soil led to isolation of ERI-11; a natural mixed culture, selected for its ability to deplete DBT in basal salt medium (BSM). A bacterial strain isolated from ERI-11, and tentatively named A₁₁, degraded more than 90 % of the initial DBT (270 µM), present as the sole carbon and sulfur source, in 72 h. Gas chromatography–mass spectrophotometry (GC–MS) analyses of the DBT degrading A₁₁ culture medium extracts led to detection of HFBT. The metabolite HFBT, produced using A₁₁, was used in degradation assays to evaluate its metabolism by the bacteria isolated in this study. Ultra violet–visible spectrophotometry and high-performance liquid chromatography analyses established the ability of the strain A₁₁ to deplete HFBT, present as the sole sulfur and carbon source in BSM. GC–MS analyses showed the presence of 2-mercaptobenzoic acid in the HFBT degrading A₁₁ culture extracts. The findings in this study establish that the environmental isolate A₁₁ possesses the metabolic capacity to degrade DBT beyond the metabolite HFBT. The compound 2-mercaptobenzoic acid is an intermediate formed on HFBT degradation by A₁₁.