The Application of Soil Amendments to the Retardance of Rainwater-Leached Metals from CCA-Treated Wood Ash in Soil

The burning of wood treated with chromated copper arsenate (CCA) produces an ash that contains high concentrations of copper, chromium, and arsenic. The subsequent leaching of these metals from burn sites can produce soil and water contamination. Soils have varying natural abilities to reduce leaching and impact metals speciation and toxicity by sorption, conversion, and sedimentation-related mechanisms. Recent regulations have resulted in increased quantities of CCA-treated lumber entering the waste stream, making the study of metals leaching from ash, and the amendment of soils to more effectively immobilize metals, important areas of investigation.

The performance of various soil amendments to immobilize or retard Cu, Cr, and As species in soil/CCA-ash mixtures was studied. The amendments evaluated were agricultural lime (CaCO₃/MgCO₃), soil softener (CaSO₄ · 2H₂O), and iron sulfate (FeSO₄). Results of this investigation show that native soil alone retards the mobility of As and Cr, amendments applied alone or in combinations further retard metal mobility compared to the control soil/CCA-ash mixture. The CaSO₄ soil amendment is most effective in reducing the rainwater leaching of Cr and As from CCA-ash in soil reducing the mobility by 72.4% and 77.3%, respectively, compared to the control soil-ash mixture. Cu mobility is increased in the presence of the native soil and by all amendments.     

Effects of Soil Components and Liming Effect of CCA-Wood Ash upon Leaching of Cu,Cr, and As from CCA-Wood Ash in Ultisol Soil

The burning of wood that has been chemically treated with chromated copper arsenate (CCA) produces an ash containing high concentrations of copper, chromium, and arsenic (CCA-metals). The rainwater-leaching of these metals from burn sites can produce increased soil and water contamination. Soil systems have varying natural abilities to retard leaching and they also impact metals speciation and toxicity through sorption, conversion, and sedimentation-related mechanisms. Recent regulations restricting the use of CCA-treatment have resulted in increased quantities of CCA-treated lumber entering the waste stream, making studies of metals leaching from CCA-wood ash and soil/CCA-wood ash systems important areas of investigation.

Wood ash composition, soil composition, and CCA-metals speciation are all important factors determining the degree of the metal mobility in a soil system containing metals leached from CCA-wood ash. The CCA-metals composition of CCA-wood ash was determined by analytical methods. Both pH and batch leaching studies were used to postulate mobility mechanisms within the CCA-wood ash/soil system. The contrasting effects of untreated-wood ash and CCA-wood ash on soil components are presented in order to assess the potential for enhancement of immobilization mechanisms that increase the soil system retardance of CCA-metals mobility.

Results of this investigation show that the Ultisol test soil retards the mobility of As and Cr compared to CCA-wood ash alone, while Cu mobility is increased in the presence of the Ultisol test soil. Experimental results show that the alkalinity of a CCA-wood ash/Ultisol soil system is lower than that of an untreated-wood ash/Ultisol soil system. This indicates a difference in chemical composition and the potential consumption of hydroxyl ions during treatment by the retardance mechanisms affecting Cr and As mobility. Therefore, the study of these contaminated soil systems and the potential enhancement of immobilization mechanisms are important areas of investigation.     

Aberrant methylation of nucleotide excision repair genes is associated with chronic arsenic poisoning

Objective: To define whether aberrant methylation of DNA repair genes is associated with chronic arsenic poisoning.

Methods: Hundred and two endemic arsenicosis patients and 36 healthy subjects were recruited. Methylight and bisulfite sequencing (BSP) assays were used to examine the methylation status of ERCC1, ERCC2 and XPC genes in peripheral blood lymphocytes (PBLs) and skin lesions of arsenicosis patients and NaAsO₂-treated HaCaT cells.

Results: Hypermethylation of ERCC1 and ERCC2 and suppressed gene expression were found in PBLs and skin lesions of arsenicosis patients and was correlated with the level of arsenic exposure. Particularly, the expression of ERCC1 and ERCC2 was associated with the severity of skin lesions. In vitro studies revealed an induction of ERCC2 hypermethylation and decreased mRNA expression in response to NaAsO₂ treatment.

Conclusion: Hypermethylation of ERCC1 and ERCC2 and concomitant suppression of gene expression might be served as the epigenetic marks associated with arsenic exposure and adverse health effects.     

Bacterial Oxidation of Refractory Sulfide Ores for Gold Recovery

Abstract

The microbiological leaching of refractory sulfide ores (pyrite, arsenopyrite) for recovery of gold is reviewed in this article. The underlying physiological, biochemical, and genetic fundamentals of the bacteria involved (Thiobacillus and Sulfolobus spp.) are complex and have yet to be elucidated in depth. The chemistry of acid and biological leaching of pyrite and arsenopyrite minerals is also complex, and many of the individual reactions are not known in detail. Bacterial leaching is discussed in relation to chemical speciation at acid pH values. Attempts to develop models for a better understanding of bioleaching processes are summarized. The importance of pH, redox potential, temperature, sulfur balance, and toxic metals is evaluated for optimizing conditions for bacterial activity. Gold is finely disseminated in refractory sulfide ores, thereby decreasing Au recoveries upon conventional cyanidation for gold dissolution. In the bioleaching process, bacteria remove the sulfide minerals by oxidative dissolution and thus expose Au to extraction with cyanide solution. Stirred tank reactors appear most suited for this biological leaching process. The overall oxidation of the sulfides is an important variable for gold recovery. Pilot- and commercial-scale bioleaching processes for gold-containing pyrite and arsenopyrite ores are reviewed. This application of mineral biotechnology competes favorably with pressure leaching and roasting processes, both of which are problematic and energy-intensive alternatives for pretreatment of auriferous pyrite/arsenopyrite ores.     

Hexavalent Chromium Reduction in Soils Contaminated with Chromated Copper Arsenate Preservative

The toxicity and mobility of chromium in the environment greatly depends upon its speciation. The reduction of hexavalent chromium to trivalent chromium in a soil environment was examined by spiking three soil types (sandy, clayey, and organic soils) with a common wood preservative solution known as chromated copper arsenate (CCA). Chromium in the CCA preservative solution exists in the hexavalent form. The total and hexavalent chromium concentrations (mg/kg) were measured over a period of 11 months. Leachable chromium concentrations (mg/L) were assessed using the synthetic precipitation leaching procedure (SPLP). The degree and rate of hexavalent chromium reduction were similar for the sand and clayey soil, but much greater for the organic soil. Most of the chromium reduction occurred within the first month of the experiment. At the end of the experiment, approximately 50% of the hexavalent chromium was converted to the trivalent form in the sand and clayey soils. Hexavalent chromium concentrations were below detection in the organic soil at the end of the experiment. Nearly all of the chromium observed in the SPLP leachates was in the form of hexavalent chromium. Chromium leaching was thus greatest in the sand and clay soils where the hexavalent chromium persisted. The results indicate that hexavalent chromium in soils can persist for considerable time periods, in particular in soils with low organic matter content.

     

Toxicity of arsenic during high temperature bioleaching of gold-bearing arsenical pyrite

 A moderately thermophilic mixed culture, MT, and the thermophilic Sulfolobus acidocaldarius strain BC were studied for their response to arsenic in a defined medium and also in media containing a pyrite and an arsenical pyrite flotation concentrate. In defined medium, the individual constituents of the MT culture exhibited a high tolerance to arsenite and arsenate compared to S. acidocaldarius strain BC. When grown on increasing concentrations of the pyrite flotation concentrate, both cultures had similar specific leaching rates over the various concentrations of the mineral substrate. In contrast, S. acidocaldarius strain BC exhibited a decreasing specific leaching rate when grown on the arsenical pyrite while the MT culture was not affected. In addition, arsenic added to cultures of S. acidocaldarius strain BC growing with pyrite as a growth substrate inhibited further growth, while added arsenic had no effect on the MT culture growing on the pyrite. These data indicate that the moderately thermophilic, arsenic-resistant MT culture was able to leach arsenical pyrite more efficiently than was the S. acidocaldarius strain BC culture at high concentrations of the mineral. This emphasizes the fact that proper culture selection is an important parameter when developing commercial processes involving arsenic-containing minerals. Received: 21 June 1995/Received revision: 25 August 1995/Accepted: 7 September 1995     

Mobilization Assessment and Possibility of Increased Availability of PAHs in Contaminated Soil Using Column Tests

Surfactants are well known to increase solubility/mobility of hydrocarbons and can be used to remediate contaminated water and soil. We wanted to explore if Ivey sol® 106 used at less than the critical micelle concentration (CMC) could effectively mobilize PAH (polycyclic aromatic hydrocarbons) from contaminated soil. The first step was to establish a measurement technique. Hence, a column leaching method was undertaken to investigate mobility of PAH-contaminated soil from a former gaswork facility. The methodology was based on a recycled flow of aqueous solution containing CaCl₂ 0.01M through two different soil columns. In the first column test, the free desorption of hydrocarbons was studied by recycling the solution through the soil column with a peristaltic pump and with a liquid/solid ratio of 2, based on ISO/DIS 18772. The solution was replaced with new solution every three days to aid desorption.

In the second column test, the set-up was similar with the exception of the aforementioned recycling solution. In this case, a second column was filled with a resin, Amberlite XAD-2, which captures PAHs entering the solution through the soil column, cleaning it of hydrocarbons (induced desorption). The results obtained for induced desorption and free desorption with reposition showed that liberation of PAHs in the presence of resins was higher (7%) as opposed to free desorption (below 0.3%). These two experiments demonstrated low mobilization of PAHs.

A third column test was performed using a non ionic surfactant, Ivey-sol® 106, 100 μg g^?1 of soil below the CMC in the recycling solution. The introduction of Ivey-sol® 106 at 0.005%w/v increased desorption of PAHs to 32%, thus demonstrating the potential for increased bioavailability of the PAHs for bioremediation of the soil.     

A Multi-biological Assay Approach to Assess Microbial Diversity in Arsenic (As) Contaminated Soils

Microbial genetic, structural and functional diversity was assessed in response to arsenic (As) pollution in a former gold mine soil. Ester-linked fatty acid methyl ester (EL-FAME), quantitative PCR (qPCR), denaturating gradient gel electrophoresis (DGGE), enzyme activities and MicroResp techniques were used.

Multivariate analysis showed that As bioavailability in soil was an important driver affecting microbial diversity. Microbial biomass assessed by EL-FAMEs and qPCR generally decreased under higher bioavailable As, as well as enzyme activities and C substrate utilization. Conversely, actinomycetes and fungal biomass increased along with total As content suggesting the selection of more resistant species.     

Response of Artemisia herba alba to hexavalent chromium pollution under arid and semi-arid conditions

The aim of this work is to study and evaluate in situ, the Artemisia herba alba responses to hexavalent chromium stress in the arid and semi-arid steppe Algerian soil. This metallic pollutant was selected to its high toxicity and to its great release from several industrial and agricultural activities emissions in the area of the study region. Artemisia herba alba is a medicinal plant but also a forage species widely used in pasture. It has dominated then adapted to the arid and semi-arid climate of Algerian steppe region, due principally to their morphological and physiological characteristics.

To establish this work, A. herba alba species were selected in the Algerian steppe region, and their soils were treated weekly with K₂CrO₄ solution for about three months. Chromium concentrations were determined in the soil and in the different plants’ parts to verify its absorption and translocation with and without pollution simulation.

This study demonstrated that A. herba alba has a strong resistance to high concentrations of hexavalent chromium. An increase in chromium concentrations at the different parts of plant’s has been noticed, without affecting its growth and vegetative development. The results of physiological and elementary analysis indicated that chromium was absorbed by A. herba alba. Cr (VI) accumulation in plant increase when they are increasing in soil. Translocation factor results indicated that Cr (VI) was mainly accumulated by A. herba alba roots. Particle size analysis showed that the soil is poor in organic substances and mostly sandy loams with 79.77% of sand and 9.76% of clay minerals.     

Solubilization and Plant Uptake of Zinc and Cadmium from Soils Treated with Elemental Sulfur

In growth chamber experiments we studied the potential use of elemental sulfur (S₈) as an acidifying agent to enhance the uptake of Cd and Zn from three different polluted soils by candidate phytoremediation plants (Brassica juncea, Helianthus annuus, Salix viminalis). Two of the three soils were calcareous, the other slightly acidic. One of the calcareous soils had been contaminated by dust emissions from a nearby brass smelter. The pollution of the other two soils had resulted from sewage sludge applications.

Sulfur was added to soils in quantities of 20 to 400 mmol sulfur kg^-1 soil. Plants were grown under fluorescent light in 1.5 l ($OS 13 cm) pots for 28 d.

Within 700 h soil pH decreased significantly in all soils, depending on S₈ dosage. In the acid soil, pH decreased from pH 6.5 to about 4 at the highest treatment level, while pH in one of the calcareous soils dropped even below pH 4. The effect was smaller in the second calcareous soil.

NaNO₃-extractable Cd and Zn increased up to 26-and 13-fold, respectively, in the acid soil, while in the calcareous soils, maximum increases were 9-and 11-fold, respectively.

Increased NaNO₃-extractable concentrations translated well into shoot concentrations (dry matter) in plants. Shoot Zn concentrations in H. annuus, for example, increased from 930 in the controls to 4300 mg kg^-1 in the highest S₈ treatment. However, effects observed in the plants were generally smaller than in the soils. In addition, in some variants growth was negatively affected, resulting in reduced metal removal from the soils.     

Spatial variation of soil properties and plant colonisation on cut slopes: a case study in the semi-tropical hilly areas of China

Background: Transport infrastructure has severe impacts on ecosystems and results in large numbers of cut slopes, which are difficult to revegetate. To increase successful revegetation, it is crucial to understand the relationships of soil properties and vegetation during spontaneous vegetation recovery on cut slopes.

Aims: To assess the effects of different slope positions on soil properties and vegetation on a cut slope and to determine the key factor(s) affecting vegetation distribution on a cut slope in a semi-tropical environment.

Methods: Soil samples were collected in three slope positions: upper slope (US), middle slope (MS) and foot slope (FS). Soil pH, moisture and bulk density and concentrations of soil organic carbon (C), total nitrogen (N_T), available nitrogen (N_A), total phosphorus (P_T), available phosphorus (P_A), total potassium (K_T) and available potassium (K_A) were determined. Vegetation composition and cover were recorded along the slope. One-way analysis of variance (ANOVA), indicator species analysis (ISA) and detrended canonical correspondence analysis (DCCA) were applied to analyse differences in soil properties among slope positions and vegetation distributions.

Results: N_T, N_A, P_T, P_A, K_A, C and pH tended to increase from the US to the FS. Two indicator species were abundant in their respective slope positions: Achyranthes bidentata in the FS and Dicranopteris dichotoma in the US. DCCA showed that pH and some soil nutrients (N_A, P_T, P_A and C) influenced the vegetation distribution on cut slope.

Conclusions: Soil pH and some soil nutrients including N_A, P_T, P_A and C had large impacts on vegetation distribution along slope positions in a semi-tropical area of China. We suggest increasing soil pH to provide a better soil environment for plant colonisation in further research concerning the restoration of such cut slopes.     

Mineral and iron oxidation at low temperatures by pure and mixed cultures of acidophilic microorganisms

An enrichment culture from a boreal sulfide mine environment containing a low-grade polymetallic ore was tested in column bioreactors for simulation of low temperature heap leaching. PCR-denaturing gradient gel electrophoresis and 16S rRNA gene sequencing revealed the enrichment culture contained an Acidithiobacillus ferrooxidans strain with high 16S rRNA gene similarity to the psychrotolerant strain SS3 and a mesophilic Leptospirillum ferrooxidans strain. As the mixed culture contained a strain that was within a clade with SS3, we used the SS3 pure culture to compare leaching rates with the At. ferrooxidans type strain in stirred tank reactors for mineral sulfide dissolution at various temperatures. The psychrotolerant strain SS3 catalyzed pyrite, pyrite/arsenopyrite, and chalcopyrite concentrate leaching. The rates were lower at 5 degrees C than at 30 degrees C, despite that all the available iron was in the oxidized form in the presence of At. ferrooxidans SS3. This suggests that although efficient At. ferrooxidans SS3 mediated biological oxidation of ferrous iron occurred, chemical oxidation of the sulfide minerals by ferric iron was rate limiting. In the column reactors, the leaching rates were much less affected by low temperatures than in the stirred tank reactors. A factor for the relatively high rates of mineral oxidation at 7 degrees C is that ferric iron remained in the soluble phase whereas, at 21 degrees C the ferric iron precipitated. Temperature gradient analysis of ferrous iron oxidation by this enrichment culture demonstrated two temperature optima for ferrous iron oxidation and that the mixed culture was capable of ferrous iron oxidation at 5 degrees C.     

Dependence of effectiveness of leaching of metallic sulphides on enzymes involved in inorganic sulphur metabolism in Thiobacillus ferrooxidans

Summary The leaching activity of five batches of Thiobacillus ferrooxidans, strain F26-77, cultivated under various conditions, towards elemental sulphur, ferrous ions, pyrite, covellite, chalcopyrite and sphalerite was studied. The activities of sulphite oxidase, thiosulphate oxidase and rhodanese were determined in crude, cell-free bacterial extracts. The effectiveness of leaching was directly correlated with the enzymic activity of the cultures. The results suggest that the activities of the enzymes metabolizing sulphur and its inorganic compounds in Thiobacillus ferrooxidans, or bacterial leaching activity on sulphur and sulphides, rather than the rate of oxidation of ferrous ions, should be taken as the criterion of usefulness for the leaching of sulphide minerals.     

Supercritical Fluid Extraction of a Light PAH Contaminated Sand

This work was aimed at evaluating the feasibility of a remediation treatment performed by means of a supercritical carbon dioxide extraction on a sandy soil recently contaminated by light polycyclic aromatic hydrocarbons.

The soil utilized in this study was artificially contaminated by naphthalene and anthracene. The artificial contamination process was intended to simulate a recent accidental spillage of hydrocarbon fuels.

Several extractions, aimed at singling out the operating parameters (pressure, temperature, supercritical fluid mass flow rate) that are able to obtain the residual required concentration (50 mg/kg dry soil) in the shortest time, were carried out on a on-purpose made system.

The best extraction conditions were 120 bar and 40°C for a naphthalene contaminated soil and 200 bar and 80–100°C for an anthracene contaminated soil.

The results obtained in the experimental tests made it possible to build an analytical model able to correlate, for the given soil, the extraction length to the operating parameters such as supercritical fluid density, temperature and mass flow rate.

In order to evaluate the economic feasibility of the process, a unit treatment cost was evaluated for the case of an extraction carried out in a 10 m³ reactor in the presence of the best extraction conditions that were previously determined. The extraction unit cost was therefore equal to 35 000–65 000 €/t for a soil with a starting contaminant concentration equal to 1000 mg/kg of dry soil.     

Prediction of leachate concentrations in petroleum‐contaminated soils

The efficacy of cleanup methods in reducing gasoline contamination at spill sites is typically determined by measuring benzene, toluene, xylene (BTX), and total petroleum hydrocarbon (TPH) concentrations in soil samples. Although these values may provide a direct measurement of soil contamination, they may not be indicative of what is transferred to percolating water. This study addresses this issue by measuring TPH, toluene, m‐ and p‐xylene, and naphthalene levels in gasoline‐contaminated soil columns before and after forced‐air venting and relating these values to the aqueous‐phase concentrations measured when water is percolated through the same columns.

Sandy soils with and without organic matter were packed into glass columns. The soils were brought to residual water and residual gasoline saturations by applying a vacuum to a ceramic pressure plate at the column bottom. Venting was performed by passing clean, moist air through the columns. The columns were subsequently leached under unsaturated conditions.

Soil samples were taken from the bottom of the columns upon completion of the venting or leaching phases of the experiments. Toluene, m‐ and p‐xylene, naphthalene, and TPH values were measured in soil samples extracted with either freon or methanol. Aqueous phase concentrations of these compounds were predicted using measured soil concentrations and either Raoult's law or organic matter‐water and fuel‐water partitioning theory (Boyd and Sun, 1990). The predicted results were compared with measured leachate concentrations from the same columns.

Mole fractions estimated from soil concentrations and TPH values used in Raoult's law gave good predictions of aqueous phase concentrations for compounds that had a high mole fraction in the residual nonaqueous phase liquid (NAPL). For compounds at low concentrations in the residual NAPL, an approach using a distribution coefficient that accounted for both the organic matter and residual NAPL in the soil provided better estimates than those based on Raoult's law.     

A mathematical model for the bacterial oxidation of a sulfide ore concentrate

The effect of dilution rate and feed solids concentration on the bacterial leaching of a pyrite/arsenopyrite ore concentrate was studied. A mathematical model was developed for the process based on the steady-state data collected over the range of dilution rates (20 to 110 h) and feed solids concentrations (6 to 18% w/v) studied. A modified Monod model with inhibition by arsenic was used to model bacterial ferrous ion oxidation rates. The model assumes that (i) pyrite and arsenopyrite leaching occurs solely by the action of ferric iron produced from the bacterial oxidation of ferrous iron and (ii) bacterial growth rates are proportional to ferrous ion oxidation rate. The equilibrium among the various ionic species present in the leach solution that are likely to have a significant effect on the bioleach process were included in the model. (c) 1994 John Wiley & Sons, Inc.     

Migration of arsenic(III) during bacterial oxidation of arsenopyrite in chalcopyrite concentrate by Thiobacillus ferrooxidans

During bacterial oxidation of the arsenopyrite that contaminated a chalcopyrite concentrate, the bioextraction of arsenic from the concentrate was examined. A long-term constant As(III) concentration, representing a large portion of the total arsenic, occurred in the leaching medium. As(III) was not further oxidized, either under bioextraction conditions or by Fe(III) in the presence of the mesophilic bacterium Thiobacillus ferooxidans. These results are discussed in relation to the influence of leaching microorganisms on the form of arsenic in the solution. Dissolved As(III) could be reversed into a solid phase by adsorption of As(III) by forming an iron precipitate. Correspondence to: M. Mandl     

Trolox-equivalent antioxidant capacity and composition of five alpine plant species growing at different elevations on the Qinghai–Tibetan Plateau

Background: Alpine plants on the Qinghai–Tibetan Plateau are exposed to an extremely harsh environment, namely severe cold, strong ultraviolet radiation, hypoxia and low CO₂ partial pressure. These conditions are sources of oxidative stress, which increase in severity with increasing elevation.

Aims: To examine whether antioxidant capacity and chemical composition of alpine plants change with increasing elevation.

Methods: We measured the Trolox-equivalent antioxidant capacity (TEAC) and chemical composition of five alpine plant species at 3016, 3814 and 4621 m a.s.l.

Results: With increasing elevation: (1) the TEAC increased and total phenols and tannins tended to increase in two forb and two shrub species but not in a sedge species; (2) concentrations of protein and fat increased in all five plant species; (3) polyunsaturated fatty acids (PUFA) increased and (4) mineral concentrations tended to decrease, but trends were inconsistent.

Conclusions: We conclude that with increasing elevation, TEAC and total phenols and tannins increased which we interpreted as an adaptation to higher oxidative stress; and protein and fat contents increased to support high metabolic activity. The increase in PUFA and the trend for minerals to decrease with increasing elevation require further investigation.     

Feasibility of Phytoextraction to Clean Up Low-Level Uranium-Contaminated Soil

The potential to phytoextract uranium (U) from a sandy soil contaminated at low levels was tested in the greenhouse. Two soils were tested: a control soil (317 Bq ²³⁸U kg^-1) and the same soil washed with bicarbonate (69 Bq ²³⁸U kg^-1). Ryegrass (Lolium perenne cv. Melvina), Indian mustard (Brassica juncea cv. Vitasso), and Redroot Pigweed (Amarathus retroflexus) were used as test plants.

The annual removal of the soil activity with the biomass was less than 0.1%. The addition of citric acid (25 mmol kg^-1) 1 week before the harvest increased U uptake up to 500-fold. With a ryegrass and mustard yield of 15000 kg ha^-1 and 10000 kg ha^-1, respectively, up to 3.5% and 4.6% of the soil activity could annually be removed with the biomass.

With a desired activity reduction level of 1.5 and 5 for the bicarbonate washed and control soil, respectively, it would take 10 to 50 years to attain the release limit.

A linear relationship between the plant ²³⁸U concentration and the ²³⁸U concentration in the soil solution of the control, bicarbonate-washed, or citric acid-treated soil points to the importance of the soil solution activity concentration in determining U uptake and hence to the importance of solubilising agents to increase plant uptake.

However, citric acid addition resulted in a decreased dry weight production (all plants tested) and crop regrowth (in case of ryegrass).     

Dynamic variation of histone H3 trimethyl Lys4 (H3K4me3) and heterochromatin protein 1 (HP1) with employment length in nickel smelting workers

Objective: To investigate the dynamic variation in H3K4me3 and HP1 with employment length in nickel smelting workers.

Methods: Blood samples were collected from 140 nickel smelting workers and 140 age-matched office workers to test for H3K4me3, and HP1 levels.

Results: H3K4me3 was statistically significantly different (p?<?0.05) between the two groups and positively correlated with employment length (r_s?=_?0.267). HP1 was not correlated with employment length (p?=?0.066) but was significantly different between the two groups.

Conclusions: Chronic exposure to nickel can induce oxidative damage, and increase H3K4me3 expression and inhibit HP1 expression.