In Vitro Study of a Novel Nanogold-Collagen Composite to Enhance the Mesenchymal Stem Cell Behavior for Vascular Regeneration

Novel nanocomposites based on type I collagen (Col) containing a small amount (17.4, 43.5, and 174 ppm) of gold nanoparticles (AuNPs, approximately 5 nm) were prepared in this study. The pure Col and Col-AuNP composites (Col-Au) were characterized by the UV-Vis spectroscopy (UV-Vis), surface-enhanced raman spectroscopy (SERS) and atomic force microscopy (AFM). The interaction between Col and AuNPs was confirmed by infrared (IR) spectra. The effect of AuNPs on the biocompatibility of Col, evaluated by the proliferation and reactive oxygen species (ROS) production of mesenchymal stem cells (MSCs) as well as the activation of monocytes and platelets, was investigated. Results showed that Col-Au had better biocompatibility than Col. Upon stimulation by vascular endothelial growth factor (VEGF) and stromal derived factor-1α (SDF-1α), MSCs expressed the highest levels of αvβ3 integrin/CXCR4, focal adhesion kinase (FAK), matrix metalloproteinase-2 (MMP-2), and Akt/endothelial nitric oxide synthase (eNOS) proteins when grown on the Col-Au (43.5 ppm) nanocomposite. Taken together, Col-Au nanocomposites may promote the proliferation and migration of MSCs and stimulate the endothelial cell differentiation. These results suggest that Col-Au may be used to construct tissue engineering scaffolds for vascular regeneration.     

A novel enzymatic hydrogen peroxide biosensor based on Ag/C nanocables

A novel enzymatic hydrogen peroxide sensor was successfully fabricated based on the nanocomposites containing of Ag/C nanocables and gold nanoparticles (AuNPs). Ag/C nanocables have been synthesized by a hydrothermal method and then AuNPs were assembled on the surface of Ag/C nanocables. The nanocomposites were confirmed by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDS). The above nanocomposites have satisfactory chemical stability and excellent biocompatibility. Cyclic voltammetry (CV) was used to evaluate the electrochemical performance of the Ag/C/Au nanocomposites at glassy carbon electrode (GCE). The results indicated that the Ag/C/Au nanocomposites exhibited excellent electrocatalytic activity to the reduction of H(2)O(2). It offered a linear range of 6.7×10(-9) to 8.0×10(-6) M, with a detection limit of 2.2×10(-9) M. The apparent Michaelis-Menten constant of the biosensor was 51.7×10(-6) M. These results indicated that Ag/C/Au nanocomposites have potential for constructing of a variety of electrochemical biosensors.     

Gold nanoparticles induce surface morphological transformation in polyurethane and affect the cellular response

Nanocomposites from a hexamethylene diisocyanate (HDI)-based polyester-type waterborne polyurethane (PU) containing different amounts (17.4-174 ppm) of gold (Au) nanoparticles (approximately 5 nm) were prepared. The microstructure and physiochemical properties of the nanocomposites were characterized. The cell attachment and proliferation, platelet activation, and bacterial adhesion on the nanocomposites were evaluated. Gold nanoparticles in small amounts induced significant changes in surface morphology and domain structures, from hard segment lamellae to soft segment micelles. These changes resembled the morphological transformation among different mesophases occurred in diblock copolymers. Better cellular proliferation, lower platelet activation, and reduced bacterial adhesion were demonstrated for the PU nanocomposite with 43.5 or 65 ppm of Au than the pure PU or the nanocomposite containing a different amount of Au. The different cellular response on PU-Au nanocomposites was attributed to the extensively modified surface morphology and phase separation in the presence of a small amount of Au nanoparticles.     

Current state and prospects of the phytosynthesized colloidal gold nanoparticles and their applications in cancer theranostics

The design, development, and biomedical applications of phytochemical-based green synthesis of biocompatible colloidal gold nanoparticles (AuNPs) are becoming an emerging field due to several advantages (safer, eco-friendly, simple, fast, energy efficient, low-cost, and less toxic) over conventional chemical synthetic procedures. Biosynthesized colloidal gold nanoparticles are remarkably attractive in several biomedical applications including cancer theranostics due to small size, unusual physico-chemical properties, facile surface modification, high biocompatibility, and numerous other advantages. Of late, several researchers have investigated the biosynthesis and prospective applications (diagnostics, imaging, drug delivery, and cancer therapeutics) of AuNPs in health care and medicine. However, not a single review article is available in the literature that demonstrates the anti-cancer potential of biosynthesized colloidal AuNPs with detailed mechanistic study. In the present review article, we for the first time discuss the biointerface of colloidal AuNPs, plants, and cancer mainly (i) comprehensive mechanistic aspects of phytochemical-based synthesis of AuNPs; (ii) proposed anti-cancer mechanisms along with biomedical applications in diagnostics, imaging, and drug delivery; and (iii) key challenges for biogenic AuNPs as future cancer nanomedicine.

     

Spray-painted human fibronectin coating as an effective strategy to enhance graft ligamentization of a polyethylene terephthalate artificial ligament

To enhance graft ligamentization after anterior cruciate ligament (ACL) reconstruction, human fibronectin (FN) was coated on polyethylene terephthalate (PET) ligaments by spray painting. The FN-coated PET ligaments were investigated in vitro using rat mesenchymal stromal cells (MSCs). MSCs cultured on FN-coated grafts resulted in similar cell densities and amounts of proliferating cells with control grafts without coating. The FN-coated group not only gave rise to MSC-derived collagen-like tissues but also enhanced the expression of collagen-I gene. Furthermore, rat ACL reconstruction models were used to evaluate the effect of the FN coating in vivo. The FN coating significantly promoted new ligament tissue regeneration into the graft fibers. In conclusion, sprayed FN coating had a positive effect to enhance graft ligamentization of PET artificial ligament.     

Transmission and regulation of biochemical stimulus via a nanoshell directly adsorbed on the cell membrane to enhance chondrogenic differentiation of mesenchymal stem cell

A nanoscale artificial extracellular matrix (nanoshell) formed by layer-by-layer adsorption can enhance and modulate the function of stem cells by transferring biochemical stimulus to the cell directly. Here, the nanoshell composed of fibronectin (FN) and chondroitin sulfate (CS) is demonstrated to promote chondrogenic differentiation of mesenchymal stem cells (MSCs). The multilayer structure of nanoshell is formed by repeating self-assembly of FN and CS, and its thickness can be controlled through the number of layers. The expression of chondrogenic markers in MSCs coated with the FN/CS nanoshell was increased as the number of bilayers in the nanoshell increased until four, but when it exceeds five bilayers, the effect began to decrease. Finally, the MSCs coated with optimized four bilayers of FN/CS nanoshell have high chondrogenic differentiation efficiency and showed the potential to increase formation of cartilage tissue when it is transplanted into mouse kidney. So, the precise regulation of stem cell fate at single cell level can be possible through the cellular surface modification by self-assembled polymeric film.     

Synthesis and characterization of poly(N-hydroxyethylacrylamide) for long-term antifouling ability

Development of biomaterials with long-term biocompatibility, durability, and stability remains a critical challenge for biomedical devices. Here, we synthesize, characterize, and graft poly(N-(2-hydroxyethyl)acrylamide) (polyHEAA) onto both gold surfaces and gold nanoparticles (AuNPs) via surface-initiated atom transfer radical polymerization (SI-ATRP) to form a stable antifouling coating to resist nonspecific protein adsorption and bacterial attachment. Surface plasmon resonance (SPR) results demonstrate that all of polyHEAA brushes coated on the gold substrate at a wide range of film thickness of ~10-40 nm can achieve almost zero protein adsorption from undiluted blood plasma and serum for 1 h, while static bacteria assay results show that polyHEAA brushes prohibit long-term bacterial colonization by Staphylococcus epidermidis and Escherichia coli RP437 up to 3 days. Moreover, the polyHEAA-coated AuNPs with different diameters remain their hydrodynamic sizes unchanged in human blood plasma and serum for up to 7 days. All these data indicate that polyHEAA can serve as promising biomaterials with long-term biocompatibility and durability suitable for applications in complex biological media.     

Direct synthesis of Rev peptide-conjugated gold nanoparticles and their application in cancer therapeutics

We have developed a simple approach for generating peptide-conjugated gold nanoparticles (AuNPs) from the Rev peptide and gold aqueous solution. The peptide functions as both a reducing agent and a capping molecule. AuNPs of various sizes (20-300 nm) and shapes (spheres, triangular plates, and polygons) can be obtained upon modulating the ratio of gold ions to the Rev peptide. Transmission electron microscopy, X-ray diffraction, and UV-vis spectroscopy were utilized to characterize these nanoparticles. Fourier-transform infrared and X-ray photoelectron spectroscopy measurements were performed to investigate chemical interactions between the Rev peptide and AuNPs. Lactate dehydrogenase and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays revealed that the Rev peptide-AuNP nanocomposites exhibited exceptionally high cytotoxic effects toward mouse ovarian surface epithelial cell lines, relative to the effects of equal doses of the free Rev peptide. Our study suggests a new way of utilizing biomolecule-conjugated AuNPs as potentially effective anticancer drugs.     

Advances and potential application of gold nanoparticles in nanomedicine

Nanomedicine is an emerging research area which has brought new possibilities and promising applications in image, diagnosis, and treatment. Nanoparticles (NPs) for medicinal purposes can be made of several material types such as silica, carbon, different polymers, and metals as silver, copper, titanium, and gold. Gold NPs (AuNPs) are the most studied and used, mostly due to their characteristics including simple preparation, controllable size and distribution, biocompatibility, good acceptance of surface modifications, and specific surface plasmon resonance (SPR). This study reviews the scientific literature regarding the potential applications of AuNPs in the development of new diagnostic and therapeutic strategies for nanomedicine, including their biomedical use as a drug carrier, as an agent in radio and phototherapy, and bioimaging for image diagnosis. While it becomes clear that much research remains to be done to improve the use of these nanoparticles, with particular concern for safety issues, the evidence from the literature already points to the great potential of AuNPs in nanomedicine.     

Tailored Aggregate-Free Au Nanoparticle Decorations with Sharp Plasmonic Peaks on a U-Type Optical Fiber Sensor by Nanosecond Laser Irradiation

A novel experimental methodology is presented for fabricating U-shaped optical fiber probes decorated with aggregate-free Au nanoparticles exhibiting sharp localized surface plasmon resonance (LSPR) spectra. The U-type tip is coated with gold nanoparticles (AuNPs) using a simple and time-efficient dip-coating procedure, without initially taking any care to prevent the formation of nanoparticle aggregates in the coated area. In a second step, the coating was irradiated with a few tens of laser pulses of 5-ns duration at 532 nm with intensities in the range of 2–14 MW/cm², leading to the formation of aggregate-free LSPR optical fiber probes. The process was monitored and controlled in real time through the changes induced into the fiber’s extinction spectra by the laser irradiation, and the coated fibers were characterized by electron microscopy. The proposed methodology resulted into the fabrication of U-type optical fiber probes coated with AuNPs exhibiting a sharp plasmon peak, which is a perquisite for their application as sensing devices.     

Recruitment of Matrix Metalloproteinase-9 (MMP-9) to the Fibroblast Cell Surface by Lysyl Hydroxylase 3 (LH3) Triggers Transforming Growth Factor-β (TGF-β) Activation and Fibroblast Differentiation

Solid tumor growth triggers a wound healing response. Similar to wound healing, fibroblasts in the tumor stroma differentiate into myofibroblasts (also referred to as cancer-associated fibroblasts) primarily, but not exclusively, in response to transforming growth factor-β (TGF-β). Myofibroblasts in turn enhance tumor progression by remodeling the stroma. Among proteases implicated in stroma remodeling, matrix metalloproteinases (MMPs), including MMP-9, play a prominent role. Recent evidence indicates that MMP-9 recruitment to the tumor cell surface enhances tumor growth and invasion. In the present work, we addressed the potential relevance of MMP-9 recruitment to and activity at the surface of fibroblasts. We show that recruitment of MMP-9 to the fibroblast cell surface occurs through its fibronectin-like (FN) domain and that the molecule responsible for the recruitment is lysyl hydroxylase 3 (LH3). Functional assays suggest that both pro- and active MMP-9 trigger α-smooth muscle actin expression in cultured fibroblasts, reflecting myofibroblast differentiation, possibly as a result of TGF-β activation. Moreover, the recombinant FN domain inhibited both MMP-9-induced TGF-β activation and α-smooth muscle actin expression by displacing MMP-9 from the fibroblast cell surface. Together our results uncover LH3 as a new docking receptor of MMP-9 on the fibroblast cell surface and demonstrate that the MMP-9 FN domain is essential for the interaction. They also show that the recombinant FN domain inhibits MMP-9-induced TGF-β activation and fibroblast differentiation, providing a potentially attractive therapeutic reagent toward attenuating tumor progression where MMP-9 activity is strongly implicated.     

Surface modification and chemical surface analysis of biomaterials

The chemical composition of the surface layers of synthetic biomaterials used for human medical devices and in biotechnology plays a key role in determining interfacial interactions between biological media (such as protein solutions, cells, tissue) and the synthetic material. Accordingly, considerable research efforts focus on improving the 'biocompatibility' of biomaterials by applying various surface modification and thin film coating approaches. Here we focus on the patterning of surface chemistries, often designed to exercise spatial control over events such as cell attachment and spreading. Secondly, we review recent developments in chemical characterisation of biomaterials surfaces, which is essential both for verifying the success of intended surface modification strategies and for reliable interpretation of observed biological responses. Biomaterials surface analysis by imaging ToF-SIMS and XPS and compositional depth profiling are discussed, as is the emerging complementary technique of Metastable Induced Electron Spectroscopy.     

Oxidative desorption of thiocholine assembled on core-shell Fe3O4/AuNPs magnetic nanocomposites for highly sensitive determination of acetylcholinesterase activity: an exposure biomarker of organophosphates

Acetylcholinesterase (AChE) activity is a well established biomarker for biomonitoring of exposures to organophosphates (OPs) pesticides and chemical nerve agents. In this work, we described a novel electrochemical oxidative desorption-process of thiocholine, the product of enzymatic reaction, for rapid and highly sensitive determination of AChE activity in human serum. This principle is based on self-assembling of produced thiocholine onto core-shell Fe(3)O(4)/Au nanoparticles (Fe(3)O(4)/AuNPs) magnetic nanocomposites and its oxidation at electrode surface. Fe(3)O(4) magnetic core is not only used for magnetic separation from sample solutions, but also carrying more AuNPs due to its large surface-to-volume ratio. The core-shell Fe(3)O(4)/AuNPs nanocomposites were characterized by UV-Vis spectroscopy, field-emission scanning electron microscopy (FE-SEM) and electrochemical measurements. A linear relationship was obtained between the AChE activity and its concentration from 0.05 to 5.0 mU mL(-1) with a detection limit of 0.02 mU mL(-1). The method showed good results for characterization of AChE spiked human serum and detection of OP exposures from 0.05 to 20 nM, with detection limit of 0.02 nM. This new oxidative desorption assay thus provides a sensitive and quantitative tool for biomonitoring of the exposure to OP pesticides and nerve agents.     

Hydrophilic polydopamine‐coated magnetic graphene nanocomposites for highly efficient tryptic immobilization

In this work, polydopamine‐coated magnetic graphene (MG@PDA) nanocomposites were synthesized by a facile method. Trypsin was then directly immobilized on the surface of the nanocomposites through simple PDA chemistry with no need for introducing any other coupling groups. The as‐made MG@PDA nanocomposites inherit not only the large surface area of graphene which makes them capable of immobilizing high amount of trypsin (up to 0.175 mg/mg), but also the good hydrophilicity of PDA which greatly improves their biocompatibility. Moreover, the strong magnetic responsibility makes them easy to be separated from the digested peptide solution when applying a magnetic field. The feasibility of the trypsin‐immobilized MG@PDA (MG@PDA‐trypsin) nanocomposites for protein digestion was investigated and the results indicated their high digestion efficiency in a short digestion time (10 min). In addition, the reusability and stability of the MG@PDA‐trypsin nanocomposites were also tested in our work. To further confirm the efficiency of MG@PDA‐trypsin nanocomposites for proteome analysis, they were applied to digest proteins extracted from skimmed milk, followed by nano RPLC‐ESI‐MS/MS analysis, and a total of 321 proteins were identified, much more than those obtained by 16‐h in‐solution digestion (264 proteins), indicating the great potential of MG@PDA‐trypsin nanocomposites as the supports for high‐throughput proteome study.     

几丁聚糖在硅橡胶表面作涂层的实验研究

几丁聚糖具有良好的生物相容性和抗菌性,作为生物涂层已经引起了广泛的注意。研究了基体的不同表面处理方法、浸涂次数和几丁聚糖溶液浓度对涂层的表面形貌、结合强度等性能的影响,结果显示,几丁聚糖溶液浓度和硅橡胶表面粗糙度都存在一个最佳取值范围;增加浸涂次数可以改善涂层光洁度,但是对涂层附着力贡献不大;硅橡胶经紫外照射后可以改善几丁聚糖在其上的成膜性能。     

Facile fabrication of gelatin‐based biopolymeric optical waveguides

The rapid development in optical detection techniques for sensing applications has led to an increased need for biocompatible, biodegradable, and disposable optical components. We present a controllable fabrication technique for an entirely biopolymeric planar optical waveguide via simple spin‐coating. The refractive index difference, thermal responsive properties, and inherent biocompatibility of gelatin and agarose were exploited in the fabrication of thin, stacked films that efficiently guide light in a core layer with higher index of refraction. These planar waveguides were fabricated using a simple spin‐coating technique, which resulted in controllable layer thicknesses and smooth layer interfaces. This technique, therefore, offers a path for routine engineering of biopolymer structures with contrasting refractive indices. The thermal stability of the gelatin core layer was improved using two crosslinkers; glutaraldehyde or microbial Transglutaminase. Light guiding in the core layer of the waveguide was demonstrated using a simple He–Ne laser setup. Guiding efficiency was further illustrated by directly embedding fluorescent markers within the core layer and detecting their spectral signature. Combined with the biopolymers' inherent biocompatibility and biodegradability, our simple strategy to fabricate disposable optical components holds the potential for the development of applications in biological sensing and implantable biomedical devices. Biotechnol. Bioeng. 2009;103: 725–732. © 2009 Wiley Periodicals, Inc.     

Ultrasensitive luminol electrochemiluminescence for protein detection based on in situ generated hydrogen peroxide as coreactant with glucose oxidase anchored AuNPs@MWCNTs labeling

In this study, an ultrasensitive luminol electrochemiluminescence (ECL) immunosensor was constructed using carboxyl group functionalized multi-walled carbon nanotubes (MWCNTs) as platform and glucose oxidase (GOD) supported on Au nanoparticles (AuNPs) decorated MWCNTs (AuNPs@MWCNTs-GOD) as labels. Firstly, using poly(ethylenimine) (PEI) as linkage reagents, AuNPs@MWCNTs were prepared and introduced for binding of the secondary antibody (Ab(2)) and glucose oxidase (GOD) with high loading amount and good biological activity due to the improved surface area of AuNPs@MWCNTs and excellent biocompatibility of AuNPs. Then the GOD and Ab(2) labeled AuNPs@MWCNTs were linked to the electrode surface via sandwich immunoreactions. These localized GOD and AuNPs amplified luminol ECL signals dramatically, which was achieved by efficient catalysis of the GOD and AuNPs towards the oxidation of glucose to in situ generate improved amount of hydrogen peroxide (H(2)O(2)) as coreactant and the enhancement of AuNPs to the ECL reaction of luminol-H(2)O(2). The experimental results demonstrated that the proposed immunosensor exhibited sensitive and stable response for the detection of α-1-fetoprotein (AFP), ranging from 0.0001 to 80 ng mL(-1) with a limit of detection down to 0.03 pg mL(-1) (S/N=3). With excellent stability, sensitivity, selectivity and simplicity, the proposed luminol ECL immunosensor showed great potential in clinical applications.     

Preparation and characterization of sulfonated chitosan-modified gold nanoparticles and their surface electronic payload of charged drugs

Chitosan (CS), a kind of naturally produced polysaccharide with extraordinary biocompatibility and biodegradation, shows much potential to act as reducing and stabilizing agent in the synthesis of gold nanoparticles (AuNPs) for drug delivery. To solve the poor solubility and expand the pharmaceutical applications of CS, various CS derivatives through rational design have been developed and further used to prepare, stabilize, and mediate self-assembling of gold materials. Herein, we chose sulfonic chitosan as a stabilizing reagent for the synthesis of highly stable AuNPs (AuNP/SCSs) with diameters of about 3 nm. For investigating their surface electronic payload of charged drugs, the negatively charged fluorescence isothiocyanate (FITC) and positively charged Rhodamine B (Rb) were used as models to be modified on the surface of the AuNP/SCSs via a layer-by-layer (LbL) method. With a basis of the fluorescence resonance energy transfer (FRET) principle, via adjusting the distance between AuNPs and fluorescent molecules by tuning the layers of charged polymers, the regulation of the fluorescence intensity of the fluorescent molecules has been achieved. In addition, the drug loading efficiency was investigated.     

Carbon nanotube/gold nanoparticles/polyethylenimine-functionalized ionic liquid thin film composites for glucose biosensing

A novel glucose biosensor based on immobilization of glucose oxidase (GOD) in thin films of polyethylenimine-functionalized ionic liquid (PFIL), containing a mixture of carbon nanotubes (CNT) and gold nanoparticles (AuNPs) and deposited on glassy carbon electrodes, was developed. Direct electrochemistry of glucose oxidase in the film was observed, with linear glucose response up to 12mM. The PFIL-stabilized gold nanoparticles had a diameter of 2.4+/-0.8nm and exhibited favorable stability (stored even over one month with invisible change in UV-vis spectroscopic measurements). In addition, CNT were also well dispersed in the PFIL matrix, then, the resulting CNT/AuNPs/PFIL composites film showed high electrocatalytic activity toward reduction of hydrogen peroxide and oxygen. Here, PFIL, due to its high ionic conductivity, good solubility to CNT, and stability to nanoparticles, played an important role in constructing stable CNT/AuNPs/PFIL/GOD composites. And good biocompatibility of PFIL also offered a friendly environment for the immobilization of biomolecules.     

Targeting of ovarian cancer cell through functionalized gold nanoparticles by novel glypican-3- binding peptide as a ultrasound contrast agents

Gold nanoparticles (AuNPs) are widely studied nanomaterials for their potential employment in advanced biomedical applications, such as selective molecular imaging and targeted drug delivery. AuNPs are generally low cost and highly biocompatible, can be easily functionalized with a wide variety of functional ligands, and have been demonstrated to be effective in enhancing ultrasound contrast at clinical diagnostic frequencies. Therefore, AuNPs might be used as contrast agents in echographic imaging. In this work, we have developed a AuNPs -based system for the in vitro molecular imaging of ovarian carcinoma cells that express high levels of glypican-3 protein (GPC-3) on their surface. In this regard, a novel GPC-3 targeting peptide was designed and conjugated to fluorescent AuNPs nanoparticles. The physicochemical properties, acoustic behavior, and biocompatibility profile of the functionalized AuNPs were characterized. Then, the binding and uptake of both naked and functionalized AuNPs were analyzed by laser scanning confocal microscopy in human HeLa cells (ovarian carcinoma) cell line. The results obtained showed that GPC-3-functionalized fluorescent AuNPs significantly enhanced the ultrasound contrast and were effectively bound and taken up by HeLa cells without affecting their viability.