In Situ Detection of a PCR-Synthesized Human Pancentromeric DNA Hybridization Probe by Color Pigment Immunostaining: Application for Dicentric Assay Automation

We report a low cost and efficient method for synthesizing a human pancentromeric DNA probe by the polymerase chain reaction (PRC) and an optimized protocol for in situ detection using color pigment immunostaining. The DNA template used in the PCR was a 2.4 kb insert containing human alphoid repeated sequences of pancentromeric DNA subcloned into pUC9 (Miller et al. 1988) and the primers hybridized to internal sequences of the 172 bp consensus tandem repeat associated with human centromeres. PCR was performed in the presence of biotin-11-dUTP, and the product was used for in situ hybridization to detect the pancentromeric region of human chromosomes in metaphase spreads. Detection of pancentromeric probe was achieved by immunoenzymatic color pigment painting to yield a permanent image detected at high resolution by bright field microscopy. The ability to synthesize the centromeric probe rapidly and to detect it with color pigment immunostaining will lead to enhanced identification and eventually to automation of various chromosome aberration assays.     

Quantitative microscopy after fluorescence in situ hybridization - a comparison between repeat-depleted and non-depleted DNA probes

Complex probes used in fluorescence in situ hybridization (FISH) usually contain repetitive DNA sequences. For chromosome painting, in situ suppression of these repetitive DNA sequences has been well established. Standard painting protocols require large amounts of an unlabeled 'blocking agent', for instance Cot-1 DNA. Recently, it has become possible to remove repetitive DNA sequences from library probes by means of magnetic purification and affinity PCR. Such a 'repeat depleted library probe' was hybridized to the q-arm of chromosome 15 of human metaphase spreads and interphase cell nuclei without any preannealing by Cot-1 DNA. Apart from this, 'standard' FISH conditions were used. After in situ hybridization, microscope images were obtained comparable to those achieved with the #15q library probe prior to depletion. The images were recorded by a true color CCD camera. By digital image analysis using 'line scan' and 'area scan' procedures, the painting efficiency expressed in terms of relative fluorescence signal intensity was quantitatively evaluated. The painting efficiency using the repeat depleted probe of chromosome 15q was compared to the painting efficiency after standard FISH. The results indicate that both types of probes are compatible to a high FISH efficiency. Using equivalent probe concentrations, no significant differences were found for FISH with standard painting probes and repeat depleted painting probes.     

Reduction of autofluorescence on DNA microarrays and slide surfaces by treatment with sodium borohydride

Microarray technology is currently being used extensively in functional genomics research and modern drug discovery and development. Henceforward, tremendous application potential for this technology exists in the fields of clinical diagnostics and prognostics, pathology, and toxicology for high-throughput analysis of "disease" gene expression. However, the major hurdle now in this technology is not the performance of the arrays but rather the efficient reproducibility of the hybridization signal intensity in a fluorescence-based analysis. The sensitivity of fluorescence detection on an array is to a large extent limited by the amount of background signal arising due to nonspecifically bound probes and fluorescence that is intrinsically associated with the chip substrate and/or the attached target DNA, the so-called autofluorescence. Here, we describe a simple and efficient method to reduce autofluorescence from undetermined sources on coated glass slides with and without DNA arrays. This sodium borohydride-mediated reduction process resulted in significantly lower and more even background fluorescence. This in turn extended the dynamic range of detection and reduced the average coefficient of variation of fluorescent signal ratios on DNA microarrays in addition to improving the detection of genes that are expressed at a low level.     

Improvement of yeast biochip sensitivity using multilayer inorganic sol-gel substrates

Today, microarray fluorescence detection is still limited because a great proportion of hybrids remain undetectable. In this paper we describe sol-gel optical multilayers (stacks of low- and high-index layers) deposited on glass slides which increase the fluorescence of DNA microarrays and favour the detection of fluorescent targets. An alternative to the expensive and time-consuming physical vapour deposition technology is proposed. It is a low-cost sol-gel coating of glass slides, each layer being made by "dipping" (alternatively in SiO2 or TiO2 solutions), "draining and drying". After the selection of the best surface layer of the substrates, the multilayer mirrors modelled for one (Cy3) or two (Cy3 and Cy5) fluorophores are spotted with a series of Yeast probes and compared to similar microarrays on standard glass slides through hybridisation experiments. The fluorescence images of the mirrors show increased signals for all the probes. The enhancement factors determined for Cy3 and for Cy3/Cy5 mirrors (10-12 and 4-5, respectively) are consistent with the initial modelling. This allows the assessment of the basal expression levels of Yeast low-expressed genes. Moreover, these substrates show a noticeable increase in sensitivity for induction/repression ratio measurements in differential gene expression experiments. So, they could be considered as promising tools for the analysis of small biological samples.     

A case of elevated spontaneous micronucleus frequency derived from chromosome 2

This work tested the hypothesis that the content of spontaneous micronuclei in lymphocytes in an apparently healthy normal human subject, who exhibited an unusually high micronucleus frequency, was non-random. Several DNA probes were used in fluorescent in-situ hybridization (FISH), beginning with a probe generated from the subject's micronuclei. Micronuclei obtained from peripheral blood lymphocytes by microdissection were subjected to random amplification of polymorphic DNA (RAPD-PCR), and a unique PCR product was then used to isolate a cosmid clone from a human genomic library. This clone hybridized to chromosome 2. Subsequently, commercial probes were included in FISH analyses of micronuclei from the subject and age- and sex-matched controls. No significant differences were found between subject and controls in the percentages of micronuclei hybridizing with a centromere probe for the X chromosome or a painting probe for chromosome 3. However, the subject had a very highly significant increase (p<0.0001) in chromosome 2 in micronuclei over a level that might be expected to be present by chance. Characterization of micronuclei may be a promising tool in studies of mechanisms of inherited or induced chromosome instability. The strength of the strategy employed in this study is that, by characterizing the chromosomes present in micronuclei, this work has advanced from an observation of chromosomal instability to a foundation for study of the mechanism underlying the observation.     

High resolution multicolor fluorescence in situ hybridization using cyanine and fluorescein dyes: Rapid chromosome identification by directly fluorescently labeled alphoid DNA probes

We tested DNA probes directly labeled by fluorescently labeled nucleotides (Cy3-dCTP, Cy5-dCTP, FluorX-dCTP) for high resolution uni- and multicolor detection of human chromosomes and analysis of centromeric DNA organization by in situ hybridization. Alpha-satellite DNA probes specific to chromosomes 1, 2, 3, 4 + 9, 5 + 19, 6, 7, 8, 10, 11, 13 + 21, 14 + 22, 15, 16, 17, 18, 20, 22, X and Y were suitable for the accurate identification of human chromosomes in metaphase and interphase cells. Cy3-labeled probes had several advantages: (1) a high level of fluorescence (5–10 times more compared with fluorescein-labeled probes); (2) a low level of fluorescence in solution, allowing the detection of target chromosomes in situ during hybridization without the washing of slides; and (3) high resistance to photobleaching during prolonged (1-2 h) exposure to strong light, thus allowing the use of a high energy mercury lamp or a long integration time during image acquisition in digital imaging microscopy for the determination of weak signals. For di- and multicolor fluorescence in situ hybridization (FISH), we successfully used different combinations of directly fluorophorated probes with preservation of images by conventional microscopy or by digital imaging microscopy. FluorX and Cy3 dyes allowed the use of cosmid probes for mapping in a one-step hybridization experiment. Cyanine-labeled fluorophorated DNA probes offer additional possibilities for rapid chromosome detection during a simple 15-min FISH procedure, and can be recommended for basic research and clinical studies, utilizing FISH.     

Analysis of radiation-induced micronuclei by fluorescence in situ hybridization (FISH) simultaneously using telomeric and centromeric DNA probes.

Fluorescence in situ hybridization using simultaneously a combination of DNA probes for the telomeric hexamer repeat (TTAGGG) and the centromerically repeated murine gamma-satellite DNA was applied to analyze the nature of radiation-induced micronuclei in mouse NIH 3T3 fibroblasts. After subtraction of spontaneously occurring micronuclei independent from the dose and time after irradiation, approximately 22% of the radiation-induced micronuclei did not reveal any hybridization signal. Approximately 17% showed one centromeric hybridization signal and about four telomeric signals, suggesting their origin from whole chromosomes. Almost 60% of radiation-induced micronuclei had telomeric signals only, suggesting their origin from acentric fragments. A fraction of micronuclei were found to contain two or more acentric fragments. Micronuclei derived from whole chromosomes or from multiple acentric fragments might, together with DNA synthesis in micronuclei, explain the occurrence of radiation-induced micronuclei with DNA contents greater than the largest chromosome arm.     

Dendrimeric coating of glass slides for sensitive DNA microarrays analysis

Successful use and reliability of microarray technology is highly dependent on several factors, including surface chemistry parameters and accessibility of cDNA targets to the DNA probes fixed onto the surface. Here, we show that functionalisation of glass slides with homemade dendrimers allow production of more sensitive and reliable DNA microarrays. The dendrimers are nanometric structures of size-controlled diameter with aldehyde function at their periphery. Covalent attachment of these spherical reactive chemical structures on amino-silanised glass slides generates a reactive ~100 Å layer onto which amino-modified DNA probes are covalently bound. This new grafting chemistry leads to the formation of uniform and homogenous spots. More over, probe concentration before spotting could be reduced from 0.2 to 0.02 mg/ml with PCR products and from 20 to 5 µM with 70mer oligonucleotides without affecting signal intensities after hybridisation with Cy3- and Cy5-labelled targets. More interestingly, while the binding capacity of captured probes on dendrimer-activated glass surface (named dendrislides) is roughly similar to other functionalised glass slides from commercial sources, detection sensitivity was 2-fold higher than with other available DNA microarrays. This detection limit was estimated to 0.1 pM of cDNA targets. Altogether, these features make dendrimer-activated slides ideal for manufacturing cost-effective DNA arrays applicable for gene expression and detection of mutations.     

A CARD-FISH protocol for the identification and enumeration of epiphytic bacteria on marine algae

A CARD-FISH protocol was developed and applied to analyse surface-associated bacteria on the marine algae Ulva lactuca, Delisea pulchra, Corallina officinalis, Amphiroa anceps, Porphyra sp. and Sargassum linearifolium. The combination of Alexa(546)-labelled tyramide as the reporter molecule with SYBR Green II counterstain allowed for superior detection of the hybridised probe fluorescence against plant tissue from which pigment autofluorescence has been reduced.     

Comparison of membranes and glass slides for 16S rDNA array analyses of microbial communities by sequence-specific labeling of DNA probes

Analyses of complex microbial communities are becoming increasingly important. Bottlenecks in these analyses, however, are the tools to actually describe the biodiversity. Novel protocols for a DNA array based analyzes of microbial communities are presented. In these protocols, the specificity obtained by sequence-specific labeling of DNA probes is combined with the possibility of detecting several different probes simultaneously by DNA array hybridization. The gene encoding 16S ribosomal RNA was chosen as the target in these analyses. This gene contains both universally conserved regions, and regions with relatively high variability. The universally conserved regions are used for PCR amplification primers, while the variable regions are used for the specific probes. Arrays prepared on positively charged nylon membranes and coated glass slides were compared. The advantage of using membranes is that chromogenic signal amplification can be used for the detection. Furthermore, the chromogenic detection does not require any sophisticated equipment. The advantage of the glass slides is that multiple fluorescence colors can be detected simultaneously, and that internal controls can be used for normalization. This approach is also suited for high throughput screenings.     

Multicolor chromosome bar codes

Chromosome bar codes are multicolor banding patterns produced by fluorescence in situ hybridization (FISH) with differentially labeled and pooled sub-regional DNA probes. These molecular cytogenetic tools facilitate chromosome identification and the delineation of both inter- and intra-chromosomal rearrangements. We present an overview of the various conceptual approaches which can be largely divided into two classes: Simple bar codes designed for chromosome identification and complex bar codes for high resolution aberration screening of entire karyotypes. We address the issue of color redundancy and how to overcome this limitation by complementation of bar codes with whole chromosome painting probes.     

Nonenzymatic autoligation in direct three-color detection of RNA and DNA point mutations

Enzymatic ligation methods are useful in diagnostic detection of DNA sequences. Here we describe the investigation of nonenzymatic phosphorothioate-iodide DNA autoligation chemistry as a method for detection and identification of both RNA and DNA sequences. Combining ligation specificity with the hybridization specificity of the ligated product is shown to yield discrimination of a point mutation as high as >10(4)-fold. Unlike enzymatic ligations, this reaction is found to be equally efficient on RNA or DNA templates. The reaction is also shown to exhibit a significant level of self-amplification, with the template acting in catalytic fashion to ligate multiple pairs of probes. A strategy for fluorescence labeling of three autoligating energy transfer (ALET) probes and directly competing them for autoligation on a target sequence is described. The method is tested in several formats, including solution phase, gel, and blot assays. The ALET probe design offers direct RNA detection, combining high sequence specificity with an easily detectable color change by fluorescence resonance energy transfer (FRET).     

Origin of nuclear buds and micronuclei in normal and folate-deprived human lymphocytes

Micronuclei are formed from chromosomes and chromosomal fragments that lag behind in anaphase and are left outside daughter nuclei in telophase. They may also be derived from broken anaphase bridges. Nuclear buds, micronucleus-like bodies attached to the nucleus by a thin nucleoplasmic connection, have been proposed to be generated similarly to micronuclei during nuclear division or in S-phase as a stage in the extrusion of extra DNA, possibly giving rise to micronuclei. To better understand these phenomena, we have characterized the contents of 894 nuclear buds and 1392 micronuclei in normal and folate-deprived 9-day cultures of human lymphocytes using fluorescence in situ hybridization with pancentromeric and pantelomeric DNA probes. Such information has not earlier been available for human primary cells. Surprisingly, there appears to be no previous data on the occurrence of telomeres in micronuclei (or buds) of normal human cells in general. Our results suggest that nuclear buds and micronuclei have partly different mechanistic origin. Interstitial DNA without centromere or telomere label was clearly more prevalent in nuclear buds (43%) than in micronuclei (13%). DNA with only telomere label or with both centromere and telomere label was more frequent in micronuclei (62% and 22%, respectively) than in nuclear buds (44% and 10%, respectively). Folate deprivation especially increased the frequency of nuclear buds and micronuclei harboring telomeric DNA and nuclear buds harboring interstitial DNA but also buds and micronuclei with both centromeric and telomeric DNA. According to the model we propose, that micronuclei in binucleate lymphocytes primarily derive from lagging chromosomes and terminal acentric fragments during mitosis. Most nuclear buds, however, are suggested to originate from interstitial or terminal acentric fragments, possibly representing nuclear membrane entrapment of DNA that has been left in cytoplasm after nuclear division or excess DNA that is being extruded from the nucleus.     

Multiparametric flow cytometric analysis of radiation-induced micronuclei in mammalian cell cultures.

A new flow cytometric method is presented that quantifies the frequency of radiation-induced micronuclei in mammalian cell cultures with high precision. After preparing a suspension of main nuclei and micronuclei stained with ethidium bromide and Hoechst 33258, both types of particles are measured simultaneously in a flow cytometer using forward light scatter and three fluorescence emission intensities excited by UV, 488 nm, and by energy transfer from Hoechst 33258 to ethidium bromide. Nonspecific debris overlapping the micronucleus distribution especially in the low fluorescence intensity region was discriminated from micronuclei by calculating ratios of the different fluorescences. The frequencies of radiation-induced micronuclei measured with this new technique agreed well with results obtained by conventional microscopy. The lower limit of the DNA content of micronuclei identified by this technique was found to be about 0.5%-0.75% of the DNA content of G1-phase nuclei. Dose effect curves and the time-dependent induction of micronuclei were measured for two different mouse cell lines.     

An Activated GOPS‐poly‐L‐Lysine‐ Coated Glass Surface for the Immobilization of 60mer Oligonucleotides

To explore a method for enhancing the immobilization and hybridization efficiency of oligonucleotides on DNA microarrays, conventional protocols of poly‐L‐lysine coating were modified by means of surface chemistry, namely, the slides were prepared by the covalently coupling of poly‐L‐lysine to a glycidoxy‐modified glass surface. The modified slides were then used to print microarrays for the detection of the SARS coronavirus by means of 60mer oligonucleotide probes. The characteristics of the modified slides concerning immobilization efficiency, hybridization dynamics, and probe stripping cycles were determined. The improved surface exhibited high immobilization efficiency, a good quality uniformity, and satisfactory hybridization dynamics. The spotting concentration of 10 μmol/L can meet the requirements of detection; the spots were approximately 170 nm in diameter; the mean fluorescence intensity of the SARS spots were between 3.2 × 10⁴ and 5.0 × 10⁴ after hybridization. Furthermore, the microarrays prepared by this method demonstrated more resistance to consecutive probe stripping cycles. The activated GOPS‐PLL slide could undergo hybridization stripping cycles for at least three cycles, and the highest loss in fluorescence intensity was found to be only 11.9 % after the third hybridization. The modified slides using the above‐mentioned method were superior to those slides treated with conventional approaches, which theoretically agrees with the fact that modification by surface chemistry attaches the DNA covalently firmly to the slides. This protocol may have great promise in the future for application in large‐scale manufacture.     

百合病毒的DNA芯片检测技术研究

根据已知的黄瓜花叶病毒,百合无症病毒、百合斑驳病毒基因核苷酸序列,设计引物和探针,制备寡核苷酸芯片。用Cy3标记核苷酸引物,不对称RT-PCR扩增产物与芯片上的寡核苷酸探针杂交,荧光扫描仪检测并分析信号。研究制备的基因芯片能够检测侵染百合的3种重要病毒核酸的特异性荧光信号,该项技术具有特异、灵敏、快速的优点。     

A DNA microarray platform based on direct detection of rRNA for characterization of freshwater sediment-related prokaryotic communities

A DNA microarray platform for the characterization of bacterial communities in freshwater sediments based on a heterogeneous set of 70 16S rRNA-targeted oligonucleotide probes and directly labeled environmental RNA was developed and evaluated. Application of a simple protocol for the efficient background blocking of aminosilane-coated slides resulted in an improved signal-to-noise ratio and a detection limit of 10 ng for particular 16S rRNA targets. An initial specificity test of the system using RNA from pure cultures of different phylogenetic lineages showed a fraction of false-positive signals of approximately 5% after protocol optimization and a marginal loss of correct positive signals. Subsequent microarray analysis of sediment-related community RNA from four different German river sites suggested low diversity for the groups targeted but indicated distinct differences in community composition. The results were supported by parallel fluorescence in situ hybridization in combination with sensitive catalyzed reporter deposition (CARD-FISH). In comparisons of the data of different sampling sites, specific detection of populations with relative cellular abundances down to 2% as well as a correlation of microarray signal intensities and population size is suggested. Our results demonstrate that DNA microarray technology allows for the fast and efficient precharacterization of complex bacterial communities by the use of standard single-cell hybridization probes and the direct detection of environmental rRNA, also in methodological challenging habitats such as heterogeneous lotic freshwater sediments.     

A DNA Microarray Platform Based on Direct Detection of rRNA for Characterization of Freshwater Sediment-Related Prokaryotic Communities

A DNA microarray platform for the characterization of bacterial communities in freshwater sediments based on a heterogeneous set of 70 16S rRNA-targeted oligonucleotide probes and directly labeled environmental RNA was developed and evaluated. Application of a simple protocol for the efficient background blocking of aminosilane-coated slides resulted in an improved signal-to-noise ratio and a detection limit of 10 ng for particular 16S rRNA targets. An initial specificity test of the system using RNA from pure cultures of different phylogenetic lineages showed a fraction of false-positive signals of ~5% after protocol optimization and a marginal loss of correct positive signals. Subsequent microarray analysis of sediment-related community RNA from four different German river sites suggested low diversity for the groups targeted but indicated distinct differences in community composition. The results were supported by parallel fluorescence in situ hybridization in combination with sensitive catalyzed reporter deposition (CARD-FISH). In comparisons of the data of different sampling sites, specific detection of populations with relative cellular abundances down to 2% as well as a correlation of microarray signal intensities and population size is suggested. Our results demonstrate that DNA microarray technology allows for the fast and efficient precharacterization of complex bacterial communities by the use of standard single-cell hybridization probes and the direct detection of environmental rRNA, also in methodological challenging habitats such as heterogeneous lotic freshwater sediments.