Stimuli-responsive zwitterionic block copolypeptides: poly(N-isopropylacrylamide)-block-poly(lysine-co-glutamic acid)

Synthesis of novel zwitterionic block copolypeptides, poly(N-isopropylacrylamide)-block-poly(L-glutamic acid-co-L-lysine) [PNiPAM(n)(PLG(x)-co-PLLys(y))m , where n is the number-average degree of polymerization (DP(n)) of PNiPAM block, x and y are the mole fraction of glutamic acid and lysine residues, respectively, and m is the total DP(n) of the peptide block], and their stimuli-responsiveness to temperature and pH variation in aqueous solutions are described. Initiated with the amino-terminated poly(N-isopropylacrylamide) (PNiPAM(n)-NH2), ring-opening polymerization (ROP) of a mixture of gamma-benzyl-L-glutamate N-carboxyanhydride (BLG-NCA), and Boc-L-lysine N-carboxyanhydride (BLLys-NCA) afforded the block copolypeptides PNiPAM(n)(PBLG(x)-co-PBLLys(y))m, with a poly(N-isopropylacrylamide) block together with a random copolypeptide block, which was then deprotected with HBr/trifluoroacetic acid into the double hydrophilic block copolypeptides, PNiPAM(n)(PLG(x)-co-PLLys(y))m. Their block ratios and lengths, as well as the amino acid residue ratios in the random copolypeptide block are varied (n = 360, x = 0.4-0.5, y = 0.4-0.6, and m = 220-252). The secondary structures of the copolypeptides in aqueous solution at different pH conditions were examined. Phase transitions in aqueous solutions induced by both pH and temperature variation were investigated by (1)H NMR spectroscopy. The transitions induced by temperature were also explored by turbidity measurements using UV/vis spectroscopy for their lower critical aggregation temperature (LCAT) determination. Furthermore, these aggregation processes were followed by dynamic light scattering measurements.     

Synthesis and characterization of a head-tail type polycation block copolymer as a nonviral gene vector

A head-tail type polycation block copolymer, which is composed of the polyamidoamine (PAMAM) dendron and poly(L-lysine) (PLL) blocks, was newly designed as a nonviral gene vector in this study. This block copolymer (PAMAM dendron-PLL) was successfully synthesized in two steps: the synthesis of the PAMAM dendron block and the polymerization of the PLL block from the PAMAM dendron block. PAMAM dendron and PLL blocks in block copolymer showed independent deprotonation behavior, and their pK(a) were determined to be 6.8 and 9.0, respectively. The complexation with pDNA was evaluated by gel retardation assay and dye exclusion assay, and both assays indicated that pDNA was selectively complexed with PLL block of block copolymer. Also, the PAMAM dendron-PLL poplyplexes showed 10(2) fold higher transfection efficiency to HeLa cells as that for PLL polyplexes. This might be due to the buffering effect of the PAMAM dendron block. This block copolymer could produce a function share in each block, i.e., tail block complexed with pDNA and head block showed a buffering effect. This molecular design of the head-tail type block copolymer might provide a new approach for realizing in vivo gene therapy.     

Fine tuning of vesicle assembly and properties using dual hydrophilic triblock copolypeptides

The design, synthesis, and self-assembly of the first dual hydrophilic triblock copolypeptide vesicles, R(H)(m)E(n)L(o) and K(P)(m)R(H)(n)L(o), is reported. Variation of the two distinct hydrophilic domains is used to tune cellular interactions without disrupting the self-assembled structure. The aqueous self-assemblies of these triblock copolypeptides in water are characterized using microscopy and DLS. Cell culture studies are used to evaluate cytotoxicity as well as intracellular uptake of the vesicles. The ability of polypeptides to incorporate ordered chain conformations that direct self-assembly, combined with the facile preparation of functional, multiblock copolypeptide sequences of defined lengths, allow the design of vesicles attractive for development as drug carriers.     

pH-sensitive cationic polymer gene delivery vehicle: N-Ac-poly(L-histidine)-graft-poly(L-lysine) comb shaped polymer

Advancing biotechnology spurs the development of new pharmaceutically engineered gene delivery vehicles. Poly(L-histidine) ?PLH? has been shown to induce membrane fusion at endosomal pH values, whereas PLL has a well documented efficacy in polyplex formation. Therefore, N-Ac-poly(L-histidine)-graft-poly(L-lysine) ?PLH-g-PLL? was synthesized by grafting poly(L-histidine) to poly(L-lysine) ?PLL?. PLH-g-PLL formed polyplex particles by electrostatic interactions with plasmid DNA ?pDNA?. The mean particle size of the polyplexes was in the range of 117 +/- 6 nm to 306 +/- 77 nm. PLH-g-PLL gene carrier demonstrated higher transfection efficacy in 293T cells than PLL at all equivalent weight ratios with pDNA. The inclusion of chloroquine as an endosomolytic agent enhanced transfection for both PLL and PLH-g-PLL gene carriers. PLH-g-PLL enhanced beta-galactosidase expression compared to PLL, but still increased in efficacy when chloroquine was included.     

Hierarchical ionic self-assembly of rod-comb block copolypeptide-surfactant complexes

Novel hierarchical nanostructures based on ionically self-assembled complexes of diblock copolypeptides and surfactants are presented. Rod-coil diblock copolypeptide poly(gamma-benzyl-L-glutamate)-block-poly(L-lysine), PBLG-b-PLL (Mn = 25,000 and 8000 for PBLG and PLL, respectively, polydispersity index 1.08), was complexed with anionic surfactants dodecanesulfonic acid (DSA) or dodecyl benzenesulfonic acid (DBSA), denoted as PBLG-b-PLL(DSA)1.0 and PBLG-b-PLL(DBSA)1.0, respectively. The complexation leading to supramolecular rod-comb architectures was studied by transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS), Fourier transform infrared spectroscopy (FTIR), and polarized optical microscopy (POM). PBLG-b-PLL, PBLG-b-PLL(DBSA)1.0, and PBLG-b-PLL(DSA)1.0 self-assemble with alternating PBLG lamellae and PLL-containing lamellae with a periodicity of 27-33 nm. Within the PBLG lamellae, the rod-like PBLG helices pack with a periodicity of ca. 1.3 nm. The internal structure of the PLL-containing lamellae depends on the complexation. For pure PBLG-b-PLL, the PLL chains adopt a random coil conformation and the PLL domains are disordered. For PBLG-b-PLL(DSA)1.0, lamellar self-assembly of periodicity of 3.7 nm within the PLL(DSA)1.0 domains is observed due to crystalline packing of the linear n-dodecyl tails. For PBLG-b-PLL(DBSA)1.0 with branched dodecyl tails, a distinct SAXS reflection is observed, suggesting self-assembly within the PLL(DBSA)1.0 domains with a periodicity of 2.9 nm. However, due to the absence of higher order reflections, the internal structure cannot be conclusively assigned. The efficient plasticization which leads to fluid-like liquid crystallinity in PBLG-b-PLL(DBSA)1.0 and an alpha-helical conformation according to FTIR allows us to suggest that the PLL(DBSA)1.0 domains have a hexagonal internal structure. The interplay of self-assembly at different length scales combined with rod-like liquid crystallinity can open new routes to design functional materials.     

Formulation and in vitro transfection efficiency of poly (D, L-lactideco-glycolide) microspheres containing plasmid DNA for gene delivery

The stability, in vitro release, and in vitro cell transfection efficiency of plasmid DNA (pDNA) poly (D,L.-lactide-co-glycolide) (PLGA) microsphere formulations were investigated. PLGA microspheres containing free and polylysine (PLL)-complexed pDNA were prepared by a water-oil-water solvent extraction/evaporation technique. Encapsulation enhanced the retention of the supereoiled structure of pDNA as determined by gel electrophoresis. PLL complexation of pDNA prior to encapsulation increased both the stability of the supercoiled form and the encapsulation efficiency. Free pDNA was completely degraded after exposure to DNase while encapsulation protected the pDNA from enzymatic degradation. Rapid initial in vitro release of pDNA was obtained from microspheres containing free pDNA. while the release from microspheres containing PLL-complexed pDNA was sustained for more than 42 days. Bioactivity of encapsulated pDNA determined by in vitro cell transfection using Chinese hamster ovary cells (CHO) showed that the bioactivity of encapsulated pDNA was retained in both formulations but to a greater extent with PLL-complexed pDNA microspheres. These results demonstrated that PLGA microspheres could be used to formulate a controlledrelease delivery system for pDNA that can protect the pDNA from DNase degradation without loss of functional activity.     

Near-infrared fluorescent labeled peptosome for application to cancer imaging

Nonionic amphiphilic copolypeptides, which were composed of hydrophilic poly(sarcosine) and hydrophobic poly(gamma-methyl L-glutamate) blocks, were synthesized with varying chain lengths of the blocks. The polypeptides having a suitable hydrophilic and hydrophobic balance were found to form vesicular assemblies of 100 nm size in buffer, which was evidenced by the TEM observation, the DLS analysis, and the encapsulation experiment. The genuine peptide vesicles, peptosomes, were labeled with a near-infrared fluorescence (NIRF) probe. In vivo retention in blood experiment showed long circulation of the peptosome in rat blood as stable as the PEGylated liposome. NIRF imaging of a small cancer on mouse by using the peptosome as a nanocarrier was successful due to the EPR effect of the peptosome. Peptosome is shown here as a novel excellent nanocarrier for molecular imaging.     

Glycopolymer modification on physicochemical and biological properties of poly(L-lysine) for gene delivery

Poly(L-lysine) (PLL) has excellent plasmid DNA (pDNA) condensation capacity. However, the relatively high cytotoxicity and low transfection efficiency limit its application as gene delivery vectors. Here, well-defined glycopolymers are synthesized by reversible addition fragmentation transfer polymerization and grafted onto PLL to improve the gene delivery performance. After glycopolymer modification, PLL shows reduced cytotoxicity. By regulating the glycopolymer length and amino group substitution degree, the glycopolymer modified PLL can condense pDNA with proper strength, protect the condensed pDNA from degradation and release them in time. Transfection with NIH3T3 and HepG2 cells shows that the glycopolymer modified PLL has improved transfection efficiencies. The low cytotoxicity, effective pDNA protection and enhanced transfection efficiencies indicate that glycopolymer modification would be an effective strategy to improve the polycation properties for gene delivery.     

Synthesis and characterization of thermo- and pH-responsive double-hydrophilic diblock copolypeptides

Synthesis of novel double-hydrophilic diblock copolypeptides (BCPs), poly(l-glutamic acid)-block-poly(N-isopropylacrylamide) (PLGnPNm), and their thermoresponsive properties in aqueous solutions at different pH values are described. The diblock copolypeptides were synthesized by a combination of ring-opening polymerization (ROP) of gamma-benzyl-l-glutamate N-carboxyanhydrides (BLG-NCA) and reversible addition-fragmentation chain transfer (RAFT) polymerization of N-isopropylacrylamide (NiPAM). A new class of RAFT agents (CTA-2 and CTA-3) with amino-functional groups was designed for this purpose. Two different strategies, i.e., macrochain transfer agent (CTA) and macroinitiator routes, were utilized and compared on the control of the chemical structures of the resulting BCPs. Their block ratios and lengths are broadly varied (n = 21-600 and m =180-442). Their thermally switchable aggregation behaviors in aqueous solutions were investigated at the microscopic level by 1H NMR spectroscopy and at the macroscopic level by turbidity measurements using UV/vis spectroscopy. The latter was also utilized for their lower critical aggregation temperature (LCAT) determination. The effects of block lengths and ratios as well as solution pH values on the collapse of NiPAM chain and aggregation process of BCPs were examined. This aggregation process was also followed by dynamic light scattering (DLS) measurements, and the thermally induced aggregate structures were investigated by transmission electron microscopy (TEM).     

Buoyant and potentiometric titrations of synthetic polpeptides. II. Five copolypeptides and two nonionizable homopolypeptides in CsCl solutions.

The buoyant density titrations of five ionizable copolypeptides in concentrated CsCl solutions have been determined. The results are used to formulate models for predicting the buoyant density titration behavior of copolypeptides and proteins using the previously reported homopolypeptide buoyant density titration curves. It was determined for these copolypeptides that the best predictive model must include not only the buoyant densities of the constituent amino acid residues and the relative composition, but also hydration and salt binding. Hydrations determined for the homopolypeptides are used in the copolypeptide predictive model. The hydrations of the neutral homopolypeptides were readily calculable since their buoyant densities are thermodynamically defined in terms of their partial specific volumes and hydrations. For the case of a charged macromolecule, an expression for the buoyant density as a function of the number and nature of the bound ions, its partial specific volume, and its relative hydration has also been available for some time. This heretofore intuitive relationship is now derived from thermodynamic principles and allows calculations of hydrations to charged macromolecules which bind either cations, anions, or both. The potentiometric titrations of three of the five copolypeptides in concentrated CsCl solutions were determined in order to study the effect of residue interaction and solvation effects on their ionization behavior. The potentiometric results are also combined directly with the buoyant density titration results to determine the correlation of the buoyant density with the degree of ionization. As in the cases of poly(Glu) and poly(His), the buoyant density of the copolypeptides changed linearily with the degree of ionization. The buoyant density titrations of two nonionizable homopolypeptides, poly(Gly) and poly(Ala), were determined in concentrated CsCl solutions. The buoyant density was found to increase with increasing pH, despite the fact that side chains do not contain ionizable groups. This is the first evidence from homopolypeptide or copolypeptide data that buoyant density changes can be observed from effects other than side-chain ionizations.     

Self-assembly of recombinant amphiphilic oligopeptides into vesicles

The aim of the present study was to design amphiphilic oligopeptides that can self-assemble into vesicular structures. The ratio of hydrophilic to hydrophobic block length was varied, and peptides were designed to have a hydrophobic tail in which the bulkiness of the amino acid side groups increases toward the hydrophilic domain (Ac-Ala-Ala-Val-Val-Leu-Leu-Leu-Trp-Glu(2/7)-COOH). These peptides were recombinantly produced in bacteria as an alternative to solid-phase synthesis. We demonstrate with different complementary techniques (dynamic and static light scattering, tryptophan fluorescence anisotropy, and electron microscopy) that these amphiphilic peptides spontaneously form vesicles with a radius of approximately 60 nm and a low polydispersity when dispersed in aqueous solution at neutral pH. Morphology and size of the vesicles were relatively insensitive to the variations in hydrophilic block length. Exposure to acidic pH resulted in formation of visible aggregates, which could be fully reversed to vesicles upon pH neutralization. In addition, it was demonstrated that water-soluble molecules can be entrapped inside these peptide vesicles. Such peptide vesicles may find applications as biodegradable drug delivery systems with a pH-dependent release profile.     

Intracellular fates of cell-penetrating block copolypeptide vesicles

The block copolypeptide poly(l-homoarginine)(60)-b-poly(l-leucine)(20) (R(60)L(20)) was previously found to self-assemble into versatile vesicles with controllable size and encapsulate hydrophilic cargo. These R(60)L(20) vesicles also demonstrated the ability to cross the cell membrane and transport encapsulated cargo into different cell lines. To assess the potential for using the R(60)L(20) vesicles as drug delivery vehicles further, we have investigated their endocytosis and intracellular trafficking behavior. Using drugs that inhibit different endocytosis pathways, we identified macropinocytosis to be a major process by which the R(60)L(20) vesicles enter HeLa cells. Subsequent immunostaining experiments demonstrated that the vesicles entered the early endosomes but not the lysosomes, suggesting that they recycle back to the cell surface. Overall, our studies indicate that the R(60)L(20) vesicles are able to enter cells intact with their cargos, and although some manage to escape from early endosomes, most are trapped within these intracellular compartments.     

Effects of copolypeptides on amyloid fibrillation of hen egg-white lysozyme

The fibrillation of hen egg-white lysozyme (HEWL) in the absence and presence of simple, unstructured D,L-lysine-co-glycine (D,L-Lys-co-gly) and D,L-lysine-co-L-phenylalanine (D,L-Lys-co-Phe) copolypeptides was studied by using a variety of analytical techniques. The attenuating and decelerating effects on fibrillation are significantly dependent on the polypeptide concentration and the composition ratios in the polypeptide chain. Interestingly, D,L-Lys-co-gly and D,L-Lys-co-Phe copolypeptides with the same composition ratio have comparable attenuating effects on fibrillation. The copolypeptide with highest molar fraction of glycine residue exhibits the strongest suppression of HEWL fibrillation. The copolypeptide has the highest hydrophobic interacting capacity due to the more molar ratio of apolar monomer in the polymer backbone. The major driving forces for the association of HEWL and copolypeptides are likely to be hydrogen bonding and hydrophobic interactions, and these interactions reduce the concentration of free protein in solution available to proceed to fibrillation, leading to the increase of lag time and attenuation of fibrillation. The results of this work may contribute to the understanding of the molecular factors affecting amyloid fibrillation and the molecular mechanism(s) of the interactions between the unstructured polypeptides and the amyloid proteins.     

Multi-morphological self-assembled structures in water of a biodegradable β-cyclodextrin-based copolymer

A rigid-coil β-cyclodextrin-poly (?-caprolactone) (CD-PCL) copolymer was synthesized in which biodegradable flexible multi PCL arms were selectively connected onto the wide side of the rigid torus-shaped β-CD through ring-opening polymerization (ROP) of ?-caprolactone (CL) and protection/deprotection technique of β-cyclodextrin (β-CD) via trimethylsilyl groups. (1)H NMR, FT-IR, and GPC analysis confirmed the "jellyfish-like" branched architecture of CD-PCL copolymers. The self-assembled structures in water of the amphiphilic CD-PCL copolymer were investigated by transmission electron microscopy (TEM), dynamic light scattering (DLC) and viscometry. The results showed that CD-PCL could self-assemble into multi-morphological aggregates such as spheres, rods, vesicles, vesicular clusters and vesicular network in water. Interestingly, hierarchical stripe structure was observed in the formed vesicular network, which was driven by the crystallization of PCL segment in micelles. Moreover, the inclusion ability of copolymer micelles with ferrocenecarboxylic acid was investigated by UV.     

Synthesis and micellization of amphiphilic brush-coil block copolymer based on poly(epsilon-caprolactone) and PEGylated polyphosphoester

A novel biodegradable amphiphilic brush-coil block copolymer consisting of poly(epsilon-caprolactone) and PEGylated polyphosphoester was synthesized by ring opening polymerization. The composition and structure of the copolymer were characterized by 1H NMR, 13C NMR, and FT-IR, and the molecular weight and molecular weight distribution were analyzed by gel permeation chromatograph (GPC) measurements to confirm the diblock structure. These amphiphilic copolymers formed micellar structures in water, and the critical micelle concentrations (CMCs) were around 10(-3) mg/mL, which was determined using pyrene as a fluorescence probe. Transmission electron microscopy (TEM) images showed that the micelles took an approximately spherical shape with core-shell structure, which was further demonstrated by laser light scattering (LLS) technique. The degradation behavior of the polymeric micelle was also investigated in the presence of Pseudomonas lipase and characterized by GPC measurement. Such polymer micelles from brush-coil block copolymers are expected to have wide utility in the field of drug delivery.     

[FeFe]-Hydrogenase models assembled into vesicular structures

Compartmentalization is a major prerequisite for the origin of life on earth according to Wächtershäuser “Iron-Sulfur-World”. The hypothesis is mainly based on an autocatalytic inorganic energy reproducing redox system consisting of iron and sulfur as requirement for the subsequent synthesis of complex organic structures. Here, we modified [FeFe]-hydrogenase models by means of covalent coupling to either oleic acid or the amphiphilic block copolymer polybutadiene-polyethyleneoxide (PB-PEO) and incorporated those into the membranes of vesicles composed of phospholipids (liposomes) or the unmodified amphiphilic polymer (polymersomes). We employed a [2Fe-2S] cluster as a hydrogenase model, since these structures are known to be suitable catalysts for the generation of H₂ in the presence of weak acids. Successful incorporation was confirmed by spectrophotometric iron quantification and the vesicles formed were characterized by size determination (photon correlation spectroscopy (PCS)), and zeta potential as well as by cryo-transmission electron microscopy (Cryo-TEM). The modified models could be incorporated into liposomes or polymersomes up to molar proportions of 3.15% and 28%, respectively. Due to the immobilization in vesicular bilayers the [FeFe]-hydrogenase models can even exhibit catalytic action under the particular conditions of the intravesicular microenvironment. Our results suggest that the vesicular systems described may be applied as a nanoreactor for the reduction of encapsulated substances by generating hydrogen and thus as a minimal cell model.     

Cellular uptake and subsequent intracellular trafficking of R8-liposomes introduced at low temperature

Intracellular trafficking is a determining factor in the transgene expression efficiency of gene vectors. In the present study, the mechanism of the cellular uptake of octaarginine (R8)-modified liposomes, when introduced at 37 °C and 4 °C, was investigated in living cells. Compared with 37 °C, the uptake of R8-liposomes was only slightly reduced at 4 °C. Dual imaging of liposomes and plasma membranes revealed that R8-liposomes were internalized by vesicular transport, and partially escaped to the cytosol at the perinuclear region at 37 °C. When introduced at 4 °C, intracellular liposomes were observed within a specific region close to the plasma membrane, and internalization of the plasma membrane was completely inhibited. Therefore, at 4 °C, R8-liposomes appear to enter cells via unique pathway, which is separate and distinct from energy-dependent vesicular transport. The subsequent nuclear delivery of encapsulated pDNA, when introduced at 4 °C, was less prominent compared with those introduced at 37 °C. Collectively, these findings demonstrate that a vesicular transport-independent pathway is responsible for the cellular uptake of liposomes. In addition, the uptake route is closely related to the subsequent nuclear delivery process; the operation of an endogenous vesicular sorting system is advantageous for the nuclear delivery of pDNA.     

Selective enzymatic degradation of self-assembled particles from amphiphilic block copolymers obtained by the combination of N-carboxyanhydride and nitroxide-mediated polymerization

Combining controlled radical polymerizations and a controlled polypeptide synthetic technique, such as N-carboxyanhydride (NCA) ring-opening polymerization, enables the generation of well-defined block copolymers to be easily accessible. Here we combine NCA polymerization with the nitroxide-mediated radical polymerization of poly(n-butyl acrylate) (PBA) and polystyrene (PS), using a TIPNO and SG1-based bifunctional initiator to create a hybrid block copolymer. The polypeptide block consists of (block) copolymers of poly(L-glutamic acid) embedded with various quantities of L-alanine. The formed superstructures (vesicles and micelles) of the block copolymers possessed varying degrees of enzyme responsiveness when exposed to elastase and thermolysin, resulting in controlled enzymatic degradation dictated by the polypeptide composition. The PBA containing block copolymers possessing 50% L-alanine in the polypeptide block showed a high degradation response compared to polymers containing lower L-alanine quantities. The particles stabilized by copolypeptides with L-alanine near the hydrophobic block showed full degradation within 4 days. Particles containing polystyrene blocks revealed no appreciable degradation under the same conditions, highlighting the specificity of the system and the importance of synthetic polymer selection. However, when the degradation temperature was increased to 70 °C, degradation could be achieved due to the higher block copolymer exchange between the particle and the solution. A number of novel biohybrid structures are disclosed that show promise as enzyme-responsive materials with potential use as payload release vehicles, following their controlled degradation by specific, target, enzymes.     

Structural appearance of linker histone H1/siRNA complexes

Efficient non-viral vectors for the in vivo siRNA transfer are still being searched for. Comparing the differences of the structural appearance of siRNA and pDNA one would assume differences in the assembling behaviour between these polyanions when using polycationic vectors such as nuclear proteins. The spontaneous assembly of nuclear proteins such as histone H1 (H1) with pDNA as polyanion which has intensively been investigated over the last decade, showed a particulate structure of the resulting complexes. For an efficient in vivo use small almost monomolecular structures are searched for. Using siRNA as the polyanion might enforce this structural prerequisite lacking unwanted aggregation processes, exploiting the molecular size of siRNA. We therefore investigated the structure of H1/siRNA complexes. Five commonly used methods characterizing the resulting assemblies such as retardation gels, static and dynamic light scattering, reduction of ethidium bromide fluorescence, analytical ultracentrifugation, and electron microscopy were used. From analytical ultracentrifugation we learned that under physiological salt conditions the siRNA-H1 binding was not cooperative, even though the gel analysis showed disproportionation which would be an indication for a cooperative binding mode. H1 formed very small and stable complexes with siRNA at a molar ratio of 1:1 and 1:2. In order to find out if the observed structural appearance of the H1/siRNA complexes is due to unspecific charge effects only or to special features of H1, polylysine was included in the study. Low molecular weight polylysine (K₁₆) showed also non-cooperative binding with siRNA.     

Stabilization of Peptide-Based Vesicles via in situ Oxygen-Mediated Cross-Linking

Reversible vesicles from poly(L-glutamic acid)(65) -block-poly[(L-lysine)-ran-(L-3,4-dihydroxyphenylalanine)](75) [PLGA(65) -b-P(LL-r-DOPA)(75) ] block copolypeptide adopt different configurations depending on the surrounding pH. At pH?=?3, AFM and TEM images show ellipsoidal morphologies, whereas at pH?=?12 both TEM and AFM reveal the formation of hollow vesicles. At pH?=?12, the P(LL-r-DOPA) block forms the internal layer of the vesicle shell and the subsequent oxygen-mediated oxidation of the phenolic groups of the DOPA lead to the formation of quinonic intermediates, which undergo intermolecular dimerization to stabilize the vesicles via in situ cross-linking. Consequently, the vesicles maintain their shape even when the pH is reversed back to 3, as confirmed by AFM and TEM.