Plastic deformation of amorphous poly(L/DL-lactide): structure evolution and physical properties

Plastic deformation of amorphous, thermally noncrystallizable poly(L/DL-lactide) 70/30 (P(L/DL)LA) was induced by a plane-strain compression in a channel-die at different temperatures, above the glass transition (Tg) from 60 to 90 degrees C. Samples undeformed (reference) and deformed to different compression ratios, from 4.6 to 23.0, were studied by X-ray diffraction, thermally modulated differential scanning calorimetry, light microscopy, and mechanical methods-viscoelastic and tensile tests. The effects of the compression ratios and deformation temperatures on the final structure and properties of the P(L/DL)LA were evaluated. It was revealed that plastic deformation transformed an amorphous P(L/DL)LA (thermally noncrystallizable) to a crystalline fibrillar texture oriented in the flow direction. Fibrillar texture was formed in spite of the tendency of the plane-strain compression to form single-crystal-like texture. The crystallite size in the transverse direction was small, up to 90 angstroms at the highest compression ratio. No evidence of lamellar organization and features of supermolecular structure were detected by small-angle X-ray scattering and light microscopy, respectively. The oriented samples exhibited a low crystallinity degree at the level of 6-9% at the highest compression ratio. The main transformation mechanism was shear and orientation-induced crystallization. The crystalline phase was in the alpha crystallographic modification of poly(lactide) typically formed in more stereoregular poly(lactide) by thermal treatment. The glass transition increased with the increase of compression ratio reflecting the increase of orientation of the polymer chains. The tensile strength of deformed samples was improved considerably in comparison to that of the reference sample.     

Fine structure and enzymatic degradation of poly[(R)-3-hydroxybutyrate] and stereocomplexed poly(lactide) nanofibers

Fiber morphology and crystalline structure of poly[(R)-3-hydroxybutyrate] (P(3HB)) and stereocomplexed poly(lactide) (PLA) nanofibers were investigated by using scanning and transmission electron microscopies and X-ray and electron diffractions. In the P(3HB) nanofibers spun from less than 1 wt% 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) solution, planar zigzag conformation (beta-form) as well as 2(1) helix conformation (alpha-form) structure was formed. Based on the electron diffraction measurement of single P(3HB) nanofiber, it was revealed that the molecular chains of P(3HB) align parallel to the fiber direction. From the enzymatic degradation test of P(3HB) nanofiber, it was shown that beta-form molecular chains are degraded more preferentially than alpha-form chains. Stereocomplexed PLA nanofibers were electrospun from 1 wt% poly(l-lactide)/poly(d-lactide) (PLLA/PDLA) solution in HFIP, which contains equal amounts of PLLA and PDLA. While as-spun stereocomplexed PLA nanofiber was amorphous, PLA nanofiber annealed at 100 degrees C contained only racemic crystal. It was supposed that the crystallization behavior of stereocomplexed PLA in the nanofiber is affected by the electrospinning process, which forcibly exerts the strain onto the polymer chains.     

A bioresorbable, polylactide reservoir for diffusional and osmotically controlled drug delivery

The purpose of this study was to design and characterize a zero-order bioresorbable reservoir delivery system (BRDS) for diffusional or osmotically controlled delivery of model drugs including macromolecules. The BRDS was manufactured by casting hollow cylindrical poly (lactic acid) (PLA): polyethylene glycol (PEG) membranes (10 x 1.6 mm) on a stainless steel mold. Physical properties of the PLA:PEG membranes were characterized by solid-state thermal analysis. After filling with drug (5 fluorouracil [5FU] or fluorescein isothiocyanate [FITC]-dextran:mannitol, 5:95 wt/wt mixture) and sealing with viscous PLA solution, cumulative in vitro dissolution studies were performed and drug release monitored by ultraviolet (UV) or florescence spectroscopy. Statistical analysis was performed using Minitab (Version 12). Differential scanning calorimetry thermograms of PLA:PEG membranes dried at 25 degrees C lacked the crystallization exotherms, dual endothermal melting peaks, and endothermal glass transition observed in PLA membranes dried at -25 degrees C. In vitro release studies demonstrated zero-order release of 5FU for up to 6 weeks from BRDS manufactured with 50% wt/wt PEG (drying temperature, 25 degrees C). The release of FITC dextrans of molecular weights 4400, 42 000, 148 000, and 464 000 followed zero-order kinetics that were independent of the dextran molecular weight. When monitored under different concentrations of urea in the dissolution medium, the release rate of FITC dextran 42 000 showed a linear correlation with the calculated osmotic gradient(DeltaPi). This study concludes that PEG inclusion at 25 degrees C enables manufacture of uniform, cylindrical PLA membranes of controlled permeability. The absence of molecular weight effects and a linear dependence of FITC-dextran release rate on DeltaPi confirm that the BRDS can be modified to release model macromolecules by an osmotically controlled mechanism.     

Influence of Surfactant Type and Concentration on Electrospinning of Chitosan–Poly(Ethylene Oxide) Blend Nanofibers

Electrospun blend nanofibers were fabricated from chitosan (1,000 kDa, 80% DDA) and poly(ethylene oxide) (PEO; 900 kDa) at a ratio of 3:1 dispersed in 50% and 90% acetic acid. The influence of surfactants on the production of electrospun nanofibers was investigated by adding nonionic polyoxyethylene glycol dodecyl ether (Brij 35), anionic sodium dodecyl sulfate, or cationic dodecyl trimethyl ammonium bromide below, at, and above their specific critical micellar concentration to the polymer blend solution. Viscosity, conductivity, and surface tension of polymer solutions, as well as morphology and composition, of nanofibers containing surfactants were determined. Pure chitosan did not form fibers and was instead deposited as beads. Addition of PEO and an increasing concentration of surfactants induced spinnability and yielded larger fibers with diameters ranging from 10 to 240 nm. Surfactants affected morphology yielding needle-like, smooth, or beaded fibers. Compositional analysis revealed that nanofibers consisted of both polymers and surfactants with concentration of the constituents in nanofibers differing from that in polymer solutions. Results suggest that surfactants may modulate polymer–polymer interactions thus influencing the morphology and composition of deposited nanostructures.     

Easy alignment and effective nucleation activity of ramie fibers in injection-molded poly(lactic acid) biocomposites

The poly(lactic acid) (PLA)/ramie fiber biocomposites were fabricated, which exhibited considerable reinforcement effect comparable to the glass fiber at the same loading. The attempts were made to understand the flow-induced morphology of ramie fibers and PLA crystals in the injection-molded PLA/ramie fiber biocomposites, thus revealing its relationship to biocomposite mechanical properties. The polarized optical microscopy (POM) and two-dimensional wide-angle X-ray diffraction (2D-WAXD) were for the first time used to determine the distribution of nature fibers, which interestingly showed the ramie fibers aligned well along the flow direction over the whole thickness of injection-molded parts, instead of skin-core structure. This easy alignment of ramie fibers during the common processing was ascribed to the intrinsically high flexibility of ramie fibers and strong interfacial interaction between PLA chains and cellulose molecules of ramie fibers. Both 2D-WAXD and differential scanning calorimeter (DSC) measurements suggested that the PLA matrix in its ramie biocomposites had rather high orientation degree and crystallinity, which was attributed to effective heterogeneous nucleation induced by ramie fibers and local shearing field in the vicinity of fiber surface. Remarkable improvement of mechanical and thermo-mechanical properties was achieved for PLA/ramie fiber biocomposites, without sacrifice of toughness and ductility. Addition of 30wt% ramie fibers increased the tensile strength and modulus of PLA/ramie fiber biocomposites from 65.6 and 1468 MPa for pure PLA to 91.3 and 2977 MPa, respectively. These superior mechanical properties were ascribed to easy alignment of ramie fibers, high crystallinity of PLA, and favorable interfacial adhesion as revealed by scanning electron microscopy (SEM) observation and theoretical analysis based on dynamic mechanical analysis (DMA) data.     

Fabrication,Characterization and Cellular Compatibility of Poly(Hydroxy Alkanoate) Composite Nanofibrous Scaffolds for Nerve Tissue Engineering

Tissue engineering techniques using a combination of polymeric scaffolds and cells represent a promising approach for nerve regeneration. We fabricated electrospun scaffolds by blending of Poly (3-hydroxybutyrate) (PHB) and Poly (3-hydroxy butyrate-co-3- hydroxyvalerate) (PHBV) in different compositions in order to investigate their potential for the regeneration of the myelinic membrane. The thermal properties of the nanofibrous blends was analyzed by differential scanning calorimetry (DSC), which indicated that the melting and glass temperatures, and crystallization degree of the blends decreased as the PHBV weight ratio increased. Raman spectroscopy also revealed that the full width at half height of the band centered at 1725 cm⁻¹ can be used to estimate the crystalline degree of the electrospun meshes. Random and aligned nanofibrous scaffolds were also fabricated by electrospinning of PHB and PHBV with or without type I collagen. The influence of blend composition, fiber alignment and collagen incorporation on Schwann cell (SCs) organization and function was investigated. SCs attached and proliferated over all scaffolds formulations up to 14 days. SCs grown on aligned PHB/PHBV/collagen fibers exhibited a bipolar morphology that oriented along the fiber direction, while SCs grown on the randomly oriented fibers had a multipolar morphology. Incorporation of collagen within nanofibers increased SCs proliferation on day 14, GDNF gene expression on day 7 and NGF secretion on day 6. The results of this study demonstrate that aligned PHB/PHBV electrospun nanofibers could find potential use as scaffolds for nerve tissue engineering applications and that the presence of type I collagen in the nanofibers improves cell differentiation.     

Electrospun water-soluble carboxyethyl chitosan/poly(vinyl alcohol) nanofibrous membrane as potential wound dressing for skin regeneration

Biocompatible carboxyethyl chitosan/poly(vinyl alcohol) (CECS/PVA) nanofibers were successfully prepared by electrospinning of aqueous CECS/PVA solution. The composite nanofibrous membranes were subjected to detailed analysis by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). SEM images showed that the morphology and diameter of the nanofibers were mainly affected by the weight ratio of CECS/PVA. XRD and DSC demonstrated that there was strong intermolecular hydrogen bonding between the molecules of CECS and PVA. The crystalline microstructure of the electrospun fibers was not well developed. The potential use of the CECS/PVA electrospun fiber mats as scaffolding materials for skin regeneration was evaluated in vitro using mouse fibroblasts (L929) as reference cell lines. Indirect cytotoxicity assessment of the fiber mats indicated that the CECS/PVA electrospun mat was nontoxic to the L929 cell. Cell culture results showed that fibrous mats were good in promoting the cell attachment and proliferation. This novel electrospun matrix would be used as potential wound dressing for skin regeneration.     

Characterization of electrospun nanocomposite scaffolds and biocompatibility with adipose-derived human mesenchymal stem cells

Electrospun nanocomposite scaffolds were fabricated by encapsulating multi-walled carbon nanotubes (MWNT) in poly (lactic acid) (PLA) nanofibers. Scanning electron microscopy (SEM) confirmed the fabrication of nanofibers, and transmission electron microscopy identified the alignment and dispersion of MWNT along the axis of the fibers. Tensile testing showed an increase in the tensile modulus for a MWNT loading of 0.25 wt% compared with electrospun nanofibrous mats without MWNT reinforcement. Conductivity measurements indicated that the confined geometry of the fibrous system requires only minute doping to obtain significant enhancements at 0.32 wt%. Adipose-derived human mesenchymal stem cells (hMSCs) were seeded on electrospun scaffolds containing 1 wt% MWNT and 0 wt% MWNT, to determine the efficacy of the scaffolds for cell growth, and the effect of MWNT on hMSC viability and proliferation over two weeks in culture. Staining for live and dead cells and DNA quantification indicated that the hMSCs were alive and proliferating through day 14. SEM images of hMSCs at 14 days showed morphological differences, with hMSCs on PLA well spread and hMSCs on PLA with 1% MWNT closely packed and longitudinally aligned.     

Electrospinning of Cross-Linked Magnetic Chitosan Nanofibers for Protein Release

A poly(vinylalcohol) (PVA) electrospun/magnetic/chitosan nanocomposite fibrous cross-linked network was fabricated using in situ cross-linking electrospinning technique and used for bovine serum albumin (BSA) loading and release applications. Sodium tripolyphosphate (TPP) and glutaraldehyde (GA) were used as cross-linkers which modified magnetic-Fe₃O₄ chitosan as Fe₃O_4/CS/TPP and Fe₃O_4/CS/GA, respectively. BSA was used as a model protein drugs which was encapsulated to form Fe₃O₄/CS/TPP/BSA and Fe₃O₄/CS/GA/BSA nanoparticles. The composites were electrospun with PVA to form nanofibers. Nanofibers were characterized by field emission scanning electron microscopy (FESEM) and Fourier transform infrared spectroscopy (FTIR). The characterization results suggest that Fe₃O₄ nanoparticles with average size of 45 nm were successfully bound on the surface of chitosan. The cross-linked nanofibers were found to contain uniformly dispersed Fe₃O₄ nanoparticles. The size and morphology of the nanofibers network was controlled by varying the cross-linker type. FTIR data show that these two polymers have intermolecular interactions. The sample with TPP cross-linker showed an enhancement of the controlled release properties of BSA during 30-h experimental investigation.

Graphical Abstract

Open in a separate windowᅟKEY WORDS: cross-linker, electrospun, magnetite, mano-composite, protein loading     

Electrospun sodium alginate/poly(ethylene oxide) core-shell nanofibers scaffolds potential for tissue engineering applications

Core-shell structure nanofibers of sodium alginate/poly(ethylene oxide) were prepared via electrospinning their dispersions in water solution. The core-shell structure morphology of the obtained nanofibers was viewed under scanning electron microscope (SEM) and transmission electron microscope (TEM), and X-ray photoelectron spectroscopy (XPS) analysis was used to further quantify the chemical composition of the core-shell composite SA/PEO nanofibers surface in detail. Furthermore, one-step cross-linking method through being immersed in CaCl₂ solution was investigated to improve the anti-water property of the electrospun nanofibers mats in order to facilitate their practical applications as tissue engineering scaffolds, and the changes of the structural of nanofibers before and after cross-linking was characterized by Fourier transform infrared (FT-IR). Indirect cytotoxicity assessment indicated that SA/PEO nanofibers membrane was nontoxic to the fibroblasts cells, and cell culture suggested that SA/PEO nanofibers tended to promote fibroblasts cells attachment and proliferation. It was assumed that the nanofibers membrane of electrospun SA/PEO could be used for tissue engineering scaffolds.     

Electrospun polylactic acid and polyvinyl alcohol fibers as efficient and stable nanomaterials for immobilization of lipases

Electrospinning was applied to create easy-to-handle and high-surface-area membranes from continuous nanofibers of polyvinyl alcohol (PVA) or polylactic acid (PLA). Lipase PS from Burkholderia cepacia and Lipase B from Candida antarctica (CaLB) could be immobilized effectively by adsorption onto the fibrous material as well as by entrapment within the electrospun nanofibers. The biocatalytic performance of the resulting membrane biocatalysts was evaluated in the kinetic resolution of racemic 1-phenylethanol (rac-1) and 1-phenylethyl acetate (rac-2). Fine dispersion of the enzymes in the polymer matrix and large surface area of the nanofibers resulted in an enormous increase in the activity of the membrane biocatalyst compared to the non-immobilized crude powder forms of the lipases. PLA as fiber-forming polymer for lipase immobilization performed better than PVA in all aspects. Recycling studies with the various forms of electrospun membrane biocatalysts in ten cycles of the acylation and hydrolysis reactions indicated excellent stability of this forms of immobilized lipases. PLA-entrapped lipases could preserve lipase activity and enantiomer selectivity much better than the PVA-entrapped forms. The electrospun membrane forms of CaLB showed high mechanical stability in the repeated acylations and hydrolyses than commercial forms of CaLB immobilized on polyacrylamide beads (Novozyme 435 and IMMCALB-T2-150).     

PGLA编织支架的制备与初步体内评价

目的:热拉伸会改变纤维的结构和性能,进而影响由纤维编织而成的支架的性能。本文考察了PGLA纤维的拉伸倍数对编织支架在SD大鼠皮下的体内降解行为的影响。方法:制备了基于生物可降解高分子材料聚乙交酯丙交酯(PGLA,GA/LA摩尔比=90/10)的完全生物可降解编织支架,通过测试支架在大鼠体内降解过程中的失重、表面形貌、热性能、径向压缩力等变化情况,考察了纤维的不同的拉伸倍数对支架体内降解过程的影响。结果:用拉伸倍数为5的PGLA纤维编织的支架在植入SD大鼠皮下后降解最慢,重量、吸水率、结晶度、化学成分和径向压缩力的变化最慢,植入体内10天后能够保持完整的支架形态。结论:纤维的拉伸倍数会影响由纤维编织成的支架的热性能和力学性能的变化,本研究结果表明这种新的手工编织的支架具有短暂支撑管腔狭窄的潜在应用,为支架的材料选择和制备方法提供了参考,为在体内起到短暂支撑作用的支架的深入研究提供了实验基础。     

Branched poly(lactide) synthesized by enzymatic polymerization: effects of molecular branches and stereochemistry on enzymatic degradation and alkaline hydrolysis

In this article the effects of the number of molecular branches (chain ends) and the stereochemistry of poly(lactide)s (PLAs) on the enzymatic degradation and alkaline hydrolysis are studied. Various linear and branched PLAs were synthesized using lipase PS (Pseudomonas fluorescens)-catalyzed ring-opening polymerization (ROP) of lactide monomers having different stereochemistries (L-lactide, D-lactide, and D,L-lactide). Five different alcohols were used as initiators for the ROP, and the monomer-to-initiator molar feed ratio was varied from 10 to 100 and 1000 for each branch in the polymer architecture. The properties of branched PLAs that would affect the enzymatic and alkaline degradations, i.e., the glass transition temperature, the melting temperature, the melting enthalpy, and the advancing contact angle, were determined. The PLA films were degraded using proteinase K or 1.0 M NaOH solution, and the weight loss and changes in the number average molecular weight (Mn) of the polymer were studied during 12 h of degradation. The results suggest that an increase in the number of molecular branches of branched PLAs enhances its enzymatic degradability and alkali hydrolyzability. Moreover, the change in Mn of the branched poly(L-lactide) (PLLA) by alkaline hydrolysis indicated that the decrease in Mn was in the first place dependent on the number of molecular branches and thereafter on the length of the molecular branch of branched PLA. The branched PLLA, poly(D-lactide) (PDLA), and poly(D,L-lactide) (PDLLA) differed in weight loss and change in Mn of the PLA segment during the enzymatic degradation. It is suggested that the branched PDLLA was degraded preferentially by proteinase K.     

In Situ Morphology Studies of the Mechanism for Solution Additive Effects on the Formation of Bulk Heterojunction Films

The most successful active film morphology in organic photovoltaics is the bulk heterojunction (BHJ). The performance of a BHJ arises from a complex interplay of the spatial organization of the segregated donor and acceptor phases and the local order/quality of the respective phases. These critical morphological features develop dynamically during film formation, and it has become common practice to control them by the introduction of processing additives. Here, in situ grazing incidence X‐ray diffraction (GIXD) and grazing incidence small angle X‐ray scattering (GISAXS) studies of the development of order in BHJ films formed from the donor polymer poly(3‐hexylthiophene) and acceptor phenyl‐C61‐butyric acid methyl ester under the influence of two common additives, 1,8‐octanedithiol and 1‐chloronaphthalene, are reported. By comparing optical aggregation to crystallization and using GISAXS to determine the number and nature of phases present during drying, two common mechanisms by which the additives increase P3HT crystallinity are identified. Additives accelerate the appearance of pre‐crystalline nuclei by controlling solvent quality and allow for extended crystal growth by delaying the onset of PCBM‐induced vitrification. The glass transition effects vary system‐to‐system and may be correlated to the number and composition of phases present during drying.     

Synthesis and characterization of biodegradable amphiphilic triblock copolymers containing L-glutamic acid units

A novel biodegradable amphiphilic triblock copolymer bearing pendant carboxyl groups PLGG-PEG-PLGG was successfully prepared by ring-opening copolymerization of l-lactide (LA) with (3s)-benzoxylcarbonylethyl-morpholine-2, 5-dione (BEMD) in the presence of dihydroxyl poly(ethylene glycol) (PEG) as a macroinitiator in bulk at 130 degrees C using SnOct(2) as catalyst and by subsequent catalytic hydrogenation. The copolymer could form micelles in aqueous solution with the cmc dependent on the composition of the copolymer. The micelles exhibited a homogeneous spherical morphology and a unimodal size distribution. Their degradation rate in the presence of proteinase K was faster than that of PLA, and they showed a low degree of cytotoxicity to the articular cartilage cells. This biodegradable amphiphilic block copolymer with pendant carboxyl groups is capable of further modification and is expected to facilitate a variety of potential biomedical applications, such as drug carriers, tissue engineering, etc.     

Potential of Magnetic Nanofiber Scaffolds with Mechanical and Biological Properties Applicable for Bone Regeneration

Magnetic nanofibrous scaffolds of poly(caprolactone) (PCL) incorporating magnetic nanoparticles (MNP) were produced, and their effects on physico-chemical, mechanical and biological properties were extensively addressed to find efficacy for bone regeneration purpose. MNPs 12 nm in diameter were citrated and evenly distributed in PCL solutions up to 20% and then were electrospun into nonwoven nanofibrous webs. Incorporation of MNPs greatly improved the hydrophilicity of the nanofibers. Tensile mechanical properties of the nanofibers (tensile strength, yield strength, elastic modulus and elongation) were significantly enhanced with the addition of MNPs up to 15%. In particular, the tensile strength increase was as high as ∼25 MPa at 15% MNPs vs. ∼10 MPa in pure PCL. PCL-MNP nanofibers exhibited magnetic behaviors, with a high saturation point and hysteresis loop area, which increased gradually with MNP content. The incorporation of MNPs substantially increased the degradation of the nanofibers, with a weight loss of ∼20% in pure PCL, ∼45% in 10% MNPs and ∼60% in 20% MNPs. Apatite forming ability of the nanofibers tested in vitro in simulated body fluid confirmed the substantial improvement gained by the addition of MNPs. Osteoblastic cells favored the MNPs-incorporated nanofibers with significantly improved initial cell adhesion and subsequent penetration through the nanofibers, compared to pure PCL. Alkaline phosphatase activity and expression of genes associated with bone (collagen I, osteopontin and bone sialoprotein) were significantly up-regulated in cells cultured on PCL-MNP nanofibers than those on pure PCL. PCL-MNP nanofibers subcutaneously implanted in rats exhibited minimal adverse tissue reactions, while inducing substantial neoblood vessel formation, which however, greatly limited in pure PCL. In vivo study in radial segmental defects also signified the bone regeneration ability of the PCL-MNP nanofibrous scaffolds. The magnetic, bone-bioactive, mechanical, cellular and tissue attributes of MNP-incorporated PCL nanofibers make them promising candidate scaffolds for bone regeneration.     

Electrospinning of poly(lactic acid) stereocomplex nanofibers

The electrospinning of stereocomplex nanofibers of high-molecular-weight poly(L-lactic acid) (PLLA)/poly(D-lactic acid) (PDLA) (PLLA/PDLA = 1:1) was carried out with chloroform as the spinning solvent. The stereocomplex nanofibers with diameters of 830-1400 and 400-970 nm were successfully obtained at voltages of -12 and -25 kV, respectively. Wide-angle X-ray scattering indicated that with an increasing absolute value of voltage from 0 to 25 kV the crystallinity of homo-crystallites composed of either PLLA or PDLA decreased from 5% to 1%, whereas the crystallinity of stereocomplex crystallites increased slightly from 16% to 20%. The obtained results reveal that electrospinning is an effective method to prepare stereocomplex nanofibers with a negligibly small amount of homo-crystallites, even when high-molecular-weight PLLA and PDLA are used, and that the orientation caused by high voltage (or electrically induced high shearing force) during electrospinning enhances the formation and growth of stereocomplex crystallites and suppresses the formation of homo-crystallites.     

Poly(l-lactide) degradation by Kibdelosporangium aridum

A new poly(L-lactide) (PLA)-degrading actinomycete, Kibdelosporangium aridum, degraded more than 97 mg out of 100 mg added high molecular weight PLA film (Mn: 3.4 x 10(5)) within 14 d in liquid culture. L-Lactic acid, the monomeric degradation product of PLA, was totally assimilated by the strain. In solid culture, many distinct grooves formed by the morphology of filamentous microorganisms on the surface of a PLA film were observed by scanning electron microscopy.     

Optimization and characterization of dextran membranes prepared by electrospinning

Dextran is soluble in both water and organic solvents, so it could be a versatile biomacromolecule for preparing nanofibrous electrospun membranes by blending with either water-soluble bioactive agents or hydrophobic biodegradable polymers for biomedical applications. We have formulated electrospun dextran membranes, and the effects of various processing parameters on the membrane properties were investigated. It was found that uniform nanofibrous dextran membranes could be formed by using water, DMSO/water, and DMSO/DMF mixtures as solvents through adjusting the processing conditions (solution concentration, voltage, and the distance between the electrode and the collecting plate). When water was used as a solvent, up to 10% (w/w) of bovine serum albumin (BSA) or lysozyme could be directly incorporated into the dextran electrospun membrane without compromising its morphology. No significant effect of the electrospinning process on lysozyme activity was observed. The composite electrospun membranes consisting of poly(D,L-lactide-co-glycolide) (PLGA) and dextran were obtained using DMSO/DMF (50/50, volume ratio) mixture as solvents. For cross-linking the electrospun membrane, dextran was modified by substitution of methacrylate groups at the hydroxyl sites. It was found that the electrospun membranes prepared from methacrylated dextran can be cured by UV irradiation in the presence of 1% of 2,2-dimethoxy-2-phenylacetophenone (DMPA) as a photoinitiator.     

Poly(vinyl alcohol) nanofibers by electrospinning as a protein delivery system and the retardation of enzyme release by additional polymer coatings

Protein-loaded (bovine serum albumin (BSA) or luciferase) poly(vinyl alcohol) (PVA) nanofibers were obtained by electrospinning. Poly(p-xylylene) (PPX, also coined as parylene) coated PVA/BSA nanofibers were prepared by chemical vapor deposition (CVD). The release of BSA from PVA nanofibers under physiological conditions was monitored by absorption spectroscopy. Burst release of BSA was noted with uncoated PVA nanofibers. In contrast, PPX-coated nanofibers exhibited a significantly retarded release of BSA depending on the coating thickness of PPX (ranging from 40 to 300 nm). Luciferase was used here as model enzyme, which after electrospinning retained its enzyme activity. This preservation of enzyme activity and the continuous release of the intact enzyme from the immersed fibers meets a fundamental prerequisite for the application of enzymes or other sensitive agents released from electrospun nanofibers under physiological conditions.