Raman spectra of copoly(D,L-alanines)

Raman spectra in the region 1000–150 cm^?1 were measured for copoly(D ,L -alanines) with the D -residue contents, 3, 7, 10, and 20%, and compared with the spectrum of the α-helical poly-L -alanine. The 532- and 378-cm^?1 peaks were assigned to the L -residues with a right-handed α-helix-like local conformation or to the D -residues with a left-handed α-helix-like local conformation. From the intensity of the latter peak the contents of these local conformations were estimated as a function of the D -residue contents for the copolymers. The 264-cm^?1 peak, which has been assigned to the breathing vibration of the α-helical poly-L -alanine, shows a marked decrease in its intensity upon the introduction of the D residues. This result suggests that the overall deformation vibration of the α-helix arises from rather long sequences of the L - and D -alanine residues with the α-helical conformation and that the intensity of this vibration depends on the content of these sequences in the copolymers.     

Vibrational analysis of peptides, polypeptides, and proteins. XXXII. alpha-Poly(L-glutamic acid)

The Raman and ir spectra of α-helical poly(L -glutamic acid) have been assigned on the basis of a normal mode calculation for this structure. The force field was based on our previously refined main-chain force constants for α-poly(L -alanine) and side-chain force constants for β-calcium–poly(L -glutamate). Despite the identical backbone α-helical structures, significantly different frequencies are calculated, and observed, in the amide III and backbone stretch regions of α-poly(L -glutamic acid), as compared with α-poly(L -alanine). This clearly demonstrates the influence of side-chain structure on mainchain vibrational modes.     

Far-infrared spectra of sequential polypeptides with -helical and polyglycine II structures

The sequential copolymers of glycine and L -alanine, L-valine and L -alanine, L-leucine and L -alanine, and L-phenylalanine and L -alanine and those containing the L-proline residues were synthesized. The infrared spectra in the region from 700 to 200 cm^-1 were measured for these polypeptides with the α-helical conformation or the polyglycine II structure and compared with the spectra of the β-form structures. The results showed that several infrared bands observed in the region from 600 to 200 cm^-1 clearly reflect not only the backbone conformations but also the local conformations of component amino acid residues of polypeptides with the α-helical, β-form and polyglycine II structures.     

Far-infrared spectra of polyalanines with alpha-helical and beta-form structures

Far-infrared spectra of poly-L -alanines having the α-helical conformation and the β-form structure were measured. The spectra of glycine–L -alanine copolymer, silk fibroin, and copoly-D ,L -alanines with different D :L compositions were also measured. In addition to the bands so far reported, four bands at 190, 107, 120, and 90 cm^?1were found for the α-helix conformation and the two bands at 442 and 247 cm^?1 were found for the β form. The 442 cm^?1 band consists of the parallel 432 cm^?1 and perpendicular 445 cm^?1 bands. The 247 cm^?1 band is well defined and has strong dichroism parallel to the direction of stretching. These two bands appear also for silk fibroin and glycine–L -alanine copolymer. All the far-infrared bands of copoly-D ,L -alanines can be interpreted as α-helix bands, the three peaks at 580, 478, and 420 cm^?1 being ascribed to the D -residue incorporated into the right-handed α-helix or to the L -residue in the left-handed α-helix.     

Conformations of poly-L-valine in solution

In order to test theoretical predictions that poly-L -valine can exist in an α-helical conformation, water-soluble block copolymers of L -valine and D , L -lysine were prepared. By carrying out the synthesis on a resin support (with the use of N-carboxyanhydrides) contamination of the individual blocks by any unreacted monomer from the previous block was avoided. A single glycine residue was incorporated at the C-terminus of the chain for use in amino acid analyses. Using optical rotatory dispersion and circular dichroism criteria, about 50% of the short valine block of (D , L -lysine HCl)₁₈-(L -valine)₁₅-(D , L -lysine-HCl)1₆-glycine was found to be in the right-handed α-helical conformation in 98% aqueous methanol, in water, the polymer appears to be a dimer, with the valine block being involved in the formation of an intermolecular β-structure.     

Poly(L-lysyl-L-alanyl-alpha-L-glutamic acid). II. Conformational studies.

The solution characterization of poly(Lys-Ala-Glu) is described. This polytripeptide is zwitterionic at neutral pH and is shown to take on a conformation which is dictated by the state of ionization, molecular weight, temperature, and solvent. The polypeptide is almost entirely α-helical at low pH and temperature for polymers of greater than 25,000 molecular weight. Melting profiles for these conditions show t_m ～ 20°C. Analysis of circular dichroism curves shows the α-helical content to vary in a linear manner with molecular weight in the range 3000–30,000. At neutral pH the charged polypeptide is essentially random, but substantial α-helix could be induced by addition of methanol or trifluoroethanol. At temperatures where the sequential polypeptide is a random coil, addition of trifluoroethanol produces a polymer which is mostly α-helical but also contains an appreciable ammount of β-structure. The infrared spectrum of a low-molecular-weight fraction assumed to be cyclo(Lys-Ala-Glu)₂ was tentatively assigned a β-pleated sheet structure. A comparison of this polytripeptide in various ionization states with other polytripeptides containing L -alanine and L -glutamate or L -lysine shows the α-helix directing properties for the (uncharged) residues to lie in the order Ala > Glu > Lys.     

Helix–coil stability constants for amino acids in nonaqueous solvents. Studies of random poly(γ-benzyl-L-glutamate-co-L-alanine) and poly(γ-benzyl-L-glutamate-co-L-leucine) in a mixed solvent

The host–guest technique has been applied to the determination of the helix–coil stability constants of two naturally occurring amino acids, L -alanine and L -leucine, in a nonaqueous solvent system. Random copolymers containing L -alanine and L -leucine, respectively, as guest residues and γ-benzyl-L -glutamate as the host residue were synthesized. The polymers were fractionated and characterized for their amino acid content, molecular weight, and helix–coil transition behavior in a dichloroacetic acid (DCA)–1,2-dichloroethane (DCE) mixture. Two types of helix–coil transitions were carried out on the copolymers: solvent-induced transitions in DCA–DCE mixtures at 25°C and thermally induced transitions in a 82:18 (wt %) DCA–DCE mixture. The thermally induced transitions were analyzed by statistical mechanical methods to determine the Zimm-Bragg parameters, σ and s, of the guest residues. The experimental data indicate that, in the nonaqueous solvent, the L -alanine residue stabilizes the α-helical conformation more than the L -leucine residue does. This is in contrast to their behavior in aqueous solution, where the reverse is true. The implications of this finding for the analysis of helical structures in globular proteins are discussed.     

Raman spectra of D and L amino acid copolymers. Poly-DL-alanine, poly-DL-leucine, and poly-DL-lysine.

The Raman spectrum of poly-DL -alanine (PDLA) in the solid state is interpreted in terms of the disordered chain conformation, in analogy with the spectrum of mechanically deformed poly-L -alanine. The polymer is largely disordered with only a small α-helical content in the solid state. When PDLA is dissolved in water, the spectra suggest that short α-helical segments are formed upon dissolution. These helical regions might be stabilized by hydrophobic bonds between side-chain methyl groups. Addition of methanol to the aqueous PDLA solutions results in a Raman spectrum resembling that of solid PDLA. This result suggests that the methanol disrupts the helical regions by breaking the hydrophobic bonds. The Raman spectra of poly-DL -leucine (PDLL) and poly-L -leucine (PLL) are compared and only slight differences are observed in the amide I and III regions, indicating that PDLL does not have an appreciable disordered chain content. Significant differences are observed in the skeletal regions. The 931-cm^?1 lines in the PLL and PDLL spectra are assigned to residues in α-helical segments of the preferred screw sense, i.e., L -residues in right-handed segments and D -residues in left-handed segments (in PDLL). On the other hand, the 890-cm^?1 line in the spectrum of PDLL is assigned to residues not in the preferred helical sence, i.e., L -residues in left-handed segments and D -residues in right-handed ones. The Raman spectra of poly-DL -lysine and poly-L -lysine in salt-free water at pH 7.0 are compared. The Raman spectra of the two polymers are very similar. However, this does not negate the hypothesis of local order in poly-L -lysine because the distribution of the residues in poly-DL -lysine probably tends towards blocks, and the individual blocks may take up the 3₁ helix.     

Low-frequency dynamics of solid poly(L-alanine) from Raman spectroscopy

Raman modes from amorphous α-helical poly(L -alanine) in the low-frequency region < 150 cm^?1 have been observed and assignments and values compared with mode-analysis calculations. The temperature dependence of the complete Raman spectrum of α-poly(L -Ala) is also reported.     

Laser-Raman spectroscopy of biomolecules. XI. Conformational study of poly(L-valine) and copolymers of L-valine and L-alanine

Raman spectroscopic studies have been carried out on polymers of L -valine ranging in degree of polymerization (DP) from 2 to 930. The spectrum of the hexapeptide (DP = 6) is closely similar over the entire range 40–1750 cm^?1 to those of polymers with much higher DP, and the structure is clearly shown to be that of the antiparallel pleated sheet (β-structure) by the amide I and III frequencies. The formation of a little α-helical structure occurs in polymers with DP above 500, although the amount does not appear to be a linear function of DP. The α-helical structure is unstable and readily destroyed in samples cast from trifluoroacetic acid solution. It is stabilized by the incorporation of L -alanine, a strong helix-former; polymers of the latter may in turn be forced into a α-structure in copolymers sufficiently rich in L -valine.     

The conformation of poly-L-alanine in hexafluoroisopropanol

High-molecular-weight poly-L -alanine dissolved in hexafluoroisopropanol exhibits infrared, ultraviolet, circular dichroism, and optical rotatory dispersion spectra which are unique and unlike any other previously reported polypeptide spectra. Strong evidence that a helical conformation is present is shown by the high degree of hypochromism in the 187mμ absorption peak and by the positions of the amide infrared bands. The CD and ORD spectra are also similar to those of α-helical polypeptides, though important qualitative and qualitative differences are observed. To explain the novel spectra, which are not mixtures of the spectra of previously reported polypeptide conformations, a new α-helix-like conformation is proposed. The postulated conformation (a doubly hydrogen-bonded helix) is a distorted α-helix in which the peptide carbonyl groups point slightly out from the helix axis and are hydrogen bonded simul taneously both to the NH of the fourth peptide residue to the carboxyl terminal side (as in the classical α-helix), as well as to a solvent molecule's hydroxyl hydrogen.     

Asymmetric selection in the copolymerization of N-carboxyl-L- and D-alanine anhydride

The copolymerization of N-carboxy-L - and D -alanine anhydride with methanol as initiator was carried out. The enantiomer excess in the starting monomer mixture is preferentially incorporated into polymer chains, demonstrating asymmetric selection during the D - and L -copolymerization. The mechanism of asymmetric-selective polymerization of α-amino acid NCA is discussed in terms of the stereoregulation by molecular asymmetry of the growing polymer chain.     

Stereochemistry of the D and L copolymerization of valine N-carboxyanhydride

In the D and L copolymerization of valine N-carboxyanhydride (NCA) with various D /L ratios initiated by n-butylamine, the stereoselection of monomer NCA by the growing polymer chains, which take a β-like conformation, does not take place. This result is in remarkable contrast to that in the D and L copolymerization of alanine NCA and of γ-benzyl glutamate NCA where the growing α-helical polymer chains participate in the stereoselection of the monomer antipodes.     

Molecular Dynamics Simulations of Peptides from the Central Domain of Smooth Muscle Caldesmon

Abstract

The central domain of smooth muscle caldesmon contains a highly charged region consisting of ten 13-residue repeats. Experimental evidence obtained from the intact protein and fragments thereof suggests that this entire region forms a single stretch of stable α-helix. We have carried out molecular dynamics simulations on peptides consisting of one, two and three repeats to examine the mechanism of α-helical stability of the central domain at the atomic level. All three peptides show high helical stability on the timescale of the MD simulations. Deviations from α-helical structure in all the simulations arise mainly from the formation of long stretches of π-helix. Interconversion between α-helical and π-helical conformations occurs through insertion of water molecules into α-helical hydrogen bonds and subsequent formation of reverse turns. The α-helical structure is stabilized by electrostatic interactions (salt bridges) between oppositely charged sidechains with i,i+4 spacings, while the π-helix is stabilized by i,i+5 salt bridge interactions. Possible i,i+3 salt bridges are of minor importance. There is a strong preference for salt bridges with a Glu residue N-terminal to a basic sidechain as compared to the opposite orientation. In the double and triple repeat peptides, strong i,i+4 salt bridges exist between the last Glu residue of one repeat and the first Lys residue of the next. This demonstrates a relationship between the repetitive nature of the central domain sequence and its ability to form very long stretches of α-helical structure.     

Attempts to observe through-chain energy transfer and electron transfer on α-helical polypeptide chain

Singlet singlet energy transfer between the two terminal chromophores attached to an α-helical polypeptide chain has been studied. The transfer efficiency was satisfactorily explained by Förster's theory when the interchromophore distance was calculated from the α-helical structure. Therefore, it was concluded that no particular effect from the possible energy band structure of the α-helical conformation was detected in the end-to-end energy transfer. Similarly, end-to-end electron transfer was attempted between the electron donor acceptor pair attached to the ends of α-helcial polypeptide chain. However, no intramolecular interaction was found between the donor acceptor pair, indicating that the exciton structure of the α-helical polypeptides is not effective enough to realize through-chain electron transfer.     

Phonon dispersion curves and normal coordinate analysis of -poly-L-alanine

The vibrational frequencies of α-helical poly-L -alanine and its N-deuterated analog have been assigned by normal coordinate analyses. The phonon dispersion curves and frequency distribution of α-poly-L -alanine have been calculated by using a model which includes hydrogen bonding. The frequency distribution was used to interpret the inelastic neutron scattering data and to calculate the heat capacity. The low-frequency chain modes involving accordian-like motions of the whole helix have been calculated and their dispersion investigated by means of a simplified model.     

Block sequential polypeptides of L-alanine and glycine with D, L-glutamic acid

Sequential polypeptides of L -alanine(A) and glycine(G), which were incorporated between two blocks of poly(D ,L -glutamic acid) (DL), were synthesized by applying Merri-field's solid-phase method. On the basis of optical rotatory dispersion criteria, DL(A)₃₈-DL was found to assume the α-helix in the whole range of the water-methanol system; whereas other block sequential polypeptides were found to assume the random-coiled conformation in water and partly the α-helix at the high methanol content. The stability of the α-helix decreased in the order: DL(A)₃₈DL, DL(A₂G)₁₀DL, DL(A₂G)₆DL, and DL(A₃G)₇DL. This phenomenon may be explained in terms of the dependence of hydrophobic bonding between the C₃H group of the ith L -alanine regularly arranged on the surface of the α-helix and the C₂H group of the (i + 3)th residue on whether the residue is alanine or glycine. The role which the methanol plays in stabilizing the α-helix is also discussed.     

Stabilization of vimentin coil2 fragment via an engineered disulfide

Cytoskeletal intermediate filaments (IFs) assemble from the elementary dimers based on a segmented α-helical coiled-coil (CC) structure. Crystallographic studies of IF protein fragments remain the main route to access their atomic structure. To enable crystallization, such fragments must be sufficiently short. As a consequence, they often fail to assemble into the correct CC dimers. In particular, human vimentin fragment D3 corresponding to the first half of coil2 (residues 261–335) stays monomeric in solution. We have induced its dimerization via introducing a disulfide link between two cysteines engineered in the hydrophobic core of the CC close to its N-terminus. The 2.3 Å crystal structure of the D3st (stabilized) fragment reveals a mostly parallel α-helical bundle structure in its N-terminal half which smoothly continues into a left-handed CC towards the C-terminus. This provides a direct evidence for a continuously α-helical structure of the coil2 segment and disproves the previously suggested existence of linker L2 separating it into two left-handed CCs. The general principles of CC dimer stabilization by disulfide introduction are also discussed.     

Conformation of poly(L-arginine). II. Complexes with polyanions

Conformaitons of poly(L -arginine)/polyanion complexes were studies by CD measurements. The polyanions were the homoplolypeptides poly(L -glutamic acid) and poly(L -aspartic acid); the synthetic polyelectrolytes and polyethylenesulfonate; and the polynucleotides were native DNA, denatured DNA, and poly(U). It was found that poly(L -arginine) forms the α-helical conformation by interacting with the acidic homopolypeptides and the synthetic anionic polyelectrolytes. In each complex, poly(L -glutamic acid) is in the α-helical conformation, whereas poly(L -aspartic acid) is mostly in the random structure. The poly(L -glutamic acid) complex changed into the β-sheet structure at the transition temperature about 65°C in 0.01M cacodylate buffer (pH 7). Even in the presence of 5M urea, this complex remained in the α-helical conformation at room temperature. The existence of the stable complex of α-helical poly(L -arginine) and α-helical poly(L -glutamic acid) was successfully supported by the model building study of the complex. The α-helix of poly(L -arginine) induced by binding with polyacrylate was the most stable of the poly(L -arginine)-polyanion complexes examined as evidenced by thermal and urea effects. The lower helical content of the polyethylenesulfonate-complexed poly(L -aginine) was explained in terms of the higher charge density of the polyanion. On the other hand, native DNA, denatured DNA, and poly(U) were not effective in stabilizing the helical structure of poly(L -arginine). This may be due to the rigidity of polyanions and to the steric hindrance of bases. Furthermore, the distinitive structual behavior of poly(L -arginine) and poly(L -lysine) regarding polyanion interaction has been noticed throughout the study.     

An amino acid packing code for α-helical structure and protein design

This work demonstrates that all packing in α-helices can be simplified to repetitive patterns of a single motif: the knob-socket. Using the precision of Voronoi Polyhedra/Delauney Tessellations to identify contacts, the knob-socket is a four-residue tetrahedral motif: a knob residue on one α-helix packs into the three-residue socket on another α-helix. The principle of the knob-socket model relates the packing between levels of protein structure: the intra-helical packing arrangements within secondary structure that permit inter-helix tertiary packing interactions. Within an α-helix, the three-residue sockets arrange residues into a uniform packing lattice. Inter-helix packing results from a definable pattern of interdigitated knob-socket motifs between two α-helices. Furthermore, the knob-socket model classifies three types of sockets: (1) free, favoring only intra-helical packing; (2) filled, favoring inter-helical interactions; and (3) non, disfavoring α-helical structure. The amino acid propensities in these three socket classes essentially represent an amino acid code for structure in α-helical packing. Using this code, we used a novel yet straightforward approach for the design of α-helical structure to validate the knob-socket model. Unique sequences for three peptides were created to produce a predicted amount of α-helical structure: mostly helical, some helical, and no helix. These three peptides were synthesized, and helical content was assessed using CD spectroscopy. The measured α-helicity of each peptide was consistent with the expected predictions. These results and analysis demonstrate that the knob-socket motif functions as the basic unit of packing and presents an intuitive tool to decipher the rules governing packing in protein structure.