Probing the active site of the hepatitis C virus serine protease by fluorescence resonance energy transfer

A serine protease domain contained within the viral NS3 protein is a key player in the maturational processing of the hepatitis C virus polyprotein and a prime target for the development of antiviral drugs. In the present work, we describe a dansylated hexapeptide inhibitor of this enzyme. Active site occupancy by this compound could be monitored following fluorescence resonance energy transfer between the dansyl fluorophore and protein tryptophan residues and could be used to 1) unambiguously assess active site binding of NS3 protease inhibitors, 2) directly determine equilibrium and pre-steady-state parameters of enzyme-inhibitor complex formation, and 3) dissect, using site-directed mutagenesis, the contribution of single residues of NS3 to inhibitor binding in direct binding assays. The assay was also used to characterize the inhibition of the NS3 protease by its cleavage products. We show that enzyme-product inhibitor complex formation depends on the presence of an NS4A cofactor peptide. Equilibrium and pre-steady-state data support an ordered mechanism of ternary (enzyme-inhibitor-cofactor) complex formation, requiring cofactor complexation prior to inhibitor binding.     

Prime site binding inhibitors of a serine protease: NS3/4A of hepatitis C virus

Serine proteases are the most studied class of proteolytic enzymes and a primary target for drug discovery. Despite the large number of inhibitors developed so far, very few make contact with the prime site of the enzyme, which constitutes an almost untapped opportunity for drug design. In the course of our studies on the serine protease NS3/4A of hepatitis C virus (HCV), we found that this enzyme is an excellent example of both the opportunities and the challenges of such design. We had previously reported on two classes of peptide inhibitors of the enzyme: (a) product inhibitors, which include the P(6)-P(1) region of the substrate and derive much of their binding energy from binding of their C-terminal carboxylate in the active site, and (b) decapeptide inhibitors, which span the S(6)-S(4)' subsites of the enzyme, whose P(2)'-P(4)' tripeptide fragment crucially contributes to potency. Here we report on further work, which combined the key binding elements of the two series and led to the development of inhibitors binding exclusively to the prime site of NS3/4A. We prepared a small combinatorial library of tripeptides, capped with a variety of constrained and unconstrained diacids. The SAR was derived from multiple analogues of the initial micromolar lead. Binding of the inhibitor(s) to the enzyme was further characterized by circular dichroism, site-directed mutagenesis, a probe displacement assay, and NMR to unequivocally prove that, according to our design, the bound inhibitor(s) occupies (occupy) the S' subsite and the active site of the protease. In addition, on the basis of the information collected, the tripeptide series was evolved toward reduced peptide character, reduced molecular weight, and higher potency. Beyond their interest as HCV antivirals, these compounds represent the first example of prime site inhibitors of a serine protease. We further suggest that the design of an inhibitor with an analogous binding mode may be possible for other serine proteases.     

Development of a high throughput scintillation proximity assay for hepatitis C virus NS3 protease that reduces the proportion of competitive inhibitors identified

A screening assay has been developed for hepatitis C virus (HCV) NS3 protease using the scintillation proximity assay (SPA) technology. The sequence of the peptide substrate used was taken from the site cleaved by the enzyme in the mature nonstructural protein of HCV. The peptide was biotinylated at the N-terminus and tritiated at the C-terminus so that a decrease in signal was detected as a result of enzyme activity. IC(50) values were calculated for the cleaved product, and it was shown that the value obtained was dependent on the substrate concentration used. The effect of substrate concentration on the inhibition of HCV NS3 protease was further highlighted in a mock screening assay, using colored natural product samples, in which the hit rate was altered by a change in substrate concentration. An increase in substrate concentration reduced the proportion of competitive inhibitors identified. This study highlighted the importance of optimizing the components used in SPA assays in order to obtain an assay format valid for high throughput screening.     

Isosorbide-based peptidomimetics as inhibitors of hepatitis C virus serine protease

Hepatitis C infection is a cause of chronic liver diseases such as cirrhosis and carcinoma. The current therapy for hepatitis C has limited efficacy and low tolerance. The HCV encodes a serine protease which is critical for viral replication, and few protease inhibitors are currently on the market. In this paper, we describe the synthesis and screening of novel isosorbide-based peptidomimetic inhibitors, in which the compounds 1d, 1e, and 1i showed significant inhibition of the protease activity in vitro at 100 µM. The compound 1e also showed dose-response (IC₅₀ = 36 ± 3 µM) and inhibited the protease mutants D168A and V170A at 100 µM, indicating it as a promising inhibitor of the HCV NS3/4A protease. Our molecular modeling studies suggest that the activity of 1e is associated with a change in the interactions of S2 and S4 subsites, since that the increased flexibility favors a decrease in activity against D168A, whereas the appearance of a hydrophobic cavity in the S4 subsite increase the inhibition against V170A strain.     

Azapeptides as inhibitors of the hepatitis C virus NS3 serine protease

Truncation and substitution SAR studies of azapeptide-based inhibitors of the Hepatitis C virus (HCV) NS3 serine protease have been performed. These azapeptides were designed from the HCV polyprotein's NS5A-NS5B trans cleavage junction and contained an azaamino acid residue at the P1 position. These azapeptides exhibited predominantly non-acylating, competitive inhibition, contrary to classical azapeptides.     

Effect of naturally occurring active site mutations on hepatitis C virus NS3 protease specificity

A comparison of the DNA sequences from all available genotypes of HCV indicate that the active site residues of the NS3 protease are strictly conserved with the exception of positions 123 and 168, which border the S(4) subsite. In genotype 3, the canonic arginine and aspartic acid have been replaced with threonine and glutamine, respectively. To determine if these differences contribute to an altered specificity, we characterized single-chain NS3 proteases from strains 1a, 1b, and 3a with peptide substrates and product inhibitors on the basis of the natural cleavage junction sequences, in addition to polyprotein substrates derived from the 1a strain. No statistically significant differences in specificity were observed. To demonstrate that the active sites were actually different, we generated and evaluated peptide substrates with unnatural extended side-chains. These studies confirmed that there are measurable differences between the NS3 proteases of genotypes 1 and 3. Specifically, a 5-fold difference in K(i) was observed between the proteases from genotypes 1 and 3 when a D-Glu occupied P(5), and a 30-fold difference was seen when this position contained a D-homoglutamate. The contribution of residues 123 and 168 toward the altered specificity was then evaluated individually by site-directed mutagenesis. These mutants showed that potency differences within this series could be attributed to the residue that occupied position 123 of the protease. Modeling these unnatural substrate/mutant protease interactions, on the basis of cocrystal structures of enzyme-substrate complexes, provides a structural basis for these observations. Proteins 2001;43:82-88.     

A scintillation proximity assay for poly(ADP-ribose) polymerase

Poly(ADP-ribose) polymerase (PARP) is an abundant nuclear protein in most of the eukaryotic tissues. When activated by DNA damage, PARP synthesizes poly(ADP-ribose) from NAD. Conventional radioactive PARP enzyme assay requires the separation of the polymer product from the NAD substrate, a rate-limiting step that hampers large-scale chemical library screening to identify novel small-molecule PARP inhibitors. By using biotinylated NAD, we have developed a scintillation proximity assay (SPA) for PARP. We demonstrated that PARP can incorporate the biotinylated ADP-ribose units into the radioactive poly(ADP-ribose) polymer, which can directly bind and excite the streptavidin-conjugated scintillation beads. PARP-SPA can be readily adapted to a 96-well format for automatic high-throughput screening for PARP inhibitors.     

Inhibitor binding induces active site stabilization of the HCV NS3 protein serine protease domain

Few structures of viral serine proteases, those encoded by the Sindbis and Semliki Forest viruses, hepatitis C virus (HCV) and cytomegalovirus, have been reported. In the life cycle of HCV a crucial role is played by a chymotrypsin-like serine protease encoded at the N-terminus of the viral NS3 protein, the solution structure of which we present here complexed with a covalently bound reversible inhibitor. Unexpectedly, the residue in the P2 position of the inhibitor induces an effective stabilization of the catalytic His-Asp hydrogen bond, by shielding that region of the protease from the solvent. This interaction appears crucial in the activation of the enzyme catalytic machinery and represents an unprecedented observation for this family of enzymes. Our data suggest that natural substrates of this serine protease could contribute to the enzyme activation by a similar induced-fit mechanism. The high degree of similarity at the His-Asp catalytic site region between HCV NS3 and other viral serine proteases suggests that this behaviour could be a more general feature for this category of viral enzymes.     

Functional binding of hexanucleotides to 3C protease of hepatitis A virus

Oligonucleotides as short as 6 nt in length have been shown to bind specifically and tightly to proteins and affect their biological function. Yet, sparse structural data are available for corresponding complexes. Employing a recently developed hexanucleotide array, we identified hexadeoxyribonucleotides that bind specifically to the 3C protease of hepatitis A virus (HAV 3C^pro). Inhibition assays in vitro identified the hexanucleotide 5′-GGGGGT-3′ (G₅T) as a 3C^pro protease inhibitor. Using ¹H NMR spectroscopy, G₅T was found to form a G-quadruplex, which might be considered as a minimal aptamer. With the help of ¹H, ¹⁵N-HSQC experiments the binding site for G₅T was located to the C-terminal β-barrel of HAV 3C^pro. Importantly, the highly conserved KFRDI motif, which has previously been identified as putative viral RNA binding site, is not part of the G₅T-binding site, nor does G₅T interfere with the binding of viral RNA. Our findings demonstrate that sequence-specific nucleic acid–protein interactions occur with oligonucleotides as small as hexanucleotides and suggest that these compounds may be of pharmaceutical relevance.     

High-throughput scintillation proximity assay for transglutaminase activity measurement

Members of the transglutaminase enzyme family are involved in a broad range of biological phenomena, including haemostasis, apoptosis, semen coagulation, skin formation, and wound healing. A new and rapid method for measurement of transglutaminase activity is described in this article. The enzyme links tritium-labeled putrescine to biotinylated oligoglutamine, and the tritiated peptide is bound to a streptavidin-coated microtiter plate permanently covered by a thin layer of scintillant. Only the radioisotope incorporated into the peptide substrate is close enough to the scintillant molecules for photons to be produced. The signal generation depends on the transglutaminase activity, and it can be detected by appropriate light-measuring instrumentation without separation steps. The assay is sensitive, specific, linear at concentrations of tissue transglutaminase between 0.05 and 1.6m U/ml, and suitable for high-throughput measurements.     

High-throughput scintillation proximity assay for stearoyl-CoA desaturase-1

Stearoyl-CoA desaturase (SCD) catalyzes the synthesis of monounsaturated fatty acids and has been implicated in a number of disease states, including obesity and diabetes. To find small-molecule inhibitor leads, a high-throughput scintillation proximity assay (SPA) was developed using the hydrophobic binding characteristics of a glass microsphere scintillant bead to capture SCD1 from a crude lysate of recombinant SCD1 in Sf9 lysate coupled with the strong binding characteristics of an azetidine compound ([(3)H]AZE). The SPA assay was stable over 24 h and could detect compounds with micromolar to nanomolar potencies. A robust 1536-well high-throughput screening assay was developed with good signal-to-noise ratio (10:1) and excellent Z' factor (0.8). A screening collection of 1.6 million compounds was screened at 11 μM, and approximately 7700 compounds were identified as initial hits, exhibiting at least 35% inhibition of [(3)H]AZE binding. Further screening and confirmation with an SCD enzyme activity assay led to a number of new structural leads for inhibition of the enzyme. The SPA assay complements the enzyme activity assay for SCD1 as a tool for the discovery of novel leads in drug discovery.     

A novel 96-well scintillation proximity assay for the measurement of apoptosis

The translocation of phospholipids across the plasma membrane has been widely documented as one of the earliest measurable biochemical events of apoptosis. Using fluorescently labelled annexin V, which preferentially binds phosphatidylserine (PS) in the presence of Ca²⁺, the externalization of PS can be measured and apoptosis quantified using flow cytometry. Conventional detection methods utilizing annexin V, while faster than in situ DNA end-labelling or DNA laddering, require extensive sample preparation which may compromise samples and makes rapid, high volume screening prohibitive. This paper describes a novel assay for the measurement of apoptosis based upon binding of radiolabelled annexin V to apoptotic cells attached to the growth surface of a 96-well scintillating microplate (Cytostar-T®). We compared measurements of apoptosis made by flow cytometry to those obtained with the scintillating microplate in three model systems, treatment of: mouse connective tissue (L-M) cells with lymphotoxin (LT), human lung carcinoma (H460) cells with Apo-2 ligand and human umbilical vein endothelial (HUVE) cells with staurosporine. In this assay, we compare both direct and indirect labelling methods by utilizing either iodinated annexin V or biotinylated annexin V/[³⁵S] streptavidin to radiolabel apoptotic cells. The signal detected is a direct consequence of the binding of annexin V to externalized PS on apoptotic cells and the proximity of the label to the base of the plate. Using this method, separation of bound and unbound radiolabel signal occurs directly within the well resulting in a sensitive assay that requires minimal manipulation and can accomodate a large number of samples.     

A binding assay for serine hydroxymethyltransferase

A sensitive assay for measuring serine hydroxymethyltransferase activity has been developed, based on the binding of N5,N10-[14C]methylene tetrahydrofolate (THF) to DEAE-cellulose paper. The complete assay requires THF, pyridoxal 5'-phosphate, [14C]serine, and enzyme. The reaction is stopped by streaking an aliquot of the reaction mixture onto a square of DEAE-cellulose paper, washing the paper with water to remove unreacted serine, drying the paper, and counting the bound N5,N10-[14C]methylene-THF. To determine that the labeled product was N5,N10-methylene-THF, unlabeled formaldehyde, which exchanges with the labeled methylene carbon, was added after the product had accumulated; 2 min after the addition of formaldehyde the amount of labeled product was reduced by 50%, and by 85% after 10 min. In addition, glycine, which reverses the reaction, and hydroxylamine, which reacts with the methylene carbon, reduced the number of counts bound to the paper. Binding of product to the filter is proportional to both enzyme concentration and assay time. No counts were retained on phosphocellulose filters. This assay represents a new and simple method for measuring serine hydroxymethyltransferase activity, which can be used to measure enzyme activity in tissue homogenates and for screening large numbers of samples.     

A sensitive proximity ligation assay for active PSA

Prostate-specific antigen (PSA) is a widely used marker for prostate cancer. The utility of PSA tests is limited by their inability to differentiate prostate cancer from non-malignant conditions such as benign prostatic hyperplasia and prostatitis. In circulation, PSA occurs in various complexed and free forms, and specific determination of some of these can be used to improve the diagnostic accuracy of PSA tests. We have previously identified peptides that specifically bind to enzymatically active PSA and using such a peptide we have developed an immunopeptidometric assay for this form of PSA. However, the sensitivity of that assay is too low to measure active PSA at clinically important levels. Recently a novel sensitive immunoassay for analysis of proteins, termed the proximity ligation assay, has been established. Here we describe a sensitive implementation of the proximity ligation assay, which utilizes a PSA-binding peptide and antibody as probes to detect active PSA. The assay has a sensitivity of 0.07 microg/l, which is approximately ten-fold lower than that of our previous assay. It does not cross-react with inactive proPSA or the highly similar kallikrein hK2. Our results show that a highly sensitive immunopeptidometric assay can be developed using proximity ligation. This principle should facilitate establishment of specific assays for active forms of other proteases.     

Assay development and data analysis of receptor-ligand binding based on scintillation proximity assay

In this paper, we described the optimization of a generic binding assay to measure ligand-receptor interactions for peroxisome proliferator-activated receptors (PPARs). The assay is based on scintillation proximity assay, in which a protein is coated on scintillant-incorporated beads, and a radiolabeled ligand stimulates the beads to emit a signal by binding to the immobilized protein. An intrinsic binding affinity of unlabeled ligands is determined by competitive displacement of the radioligand. The protein coating and ligand binding are achieved in one step by simply mixing ligands, protein and beads in sequence. No additional steps of pre-coating and washing of beads are required. Protein is captured on beads effectively by electrostatic interactions, thus no affinity labeling of protein is required. In data analysis, ligands are grouped into two classes based on their binding affinities. For tight binding ligands, an equation is derived to accurately determine the binding affinity. Otherwise a general equation applies. This quantitative and high throughput assay provides a tool to screen a large library of molecules in search of potent ligands.     

Automated high throughput screening for serine kinase inhibitors using a LEADseeker scintillation proximity assay in the 1536-well format

High-throughput screening in the 1536-well format has been largely restricted to solution-based and cell-based screens. In this article, we show the feasibility of a completely automated, robust scintillation proximity assay in the 1536-well format that is suitable to identify inhibitors for a serine/threonine kinase from a compound library. The introduction of [(33)P]phosphate into a biotinylated peptide substrate mirrors the activity of the kinase. The peptide is immobilized on streptavidin-coated LEADseeker imaging beads and [(33)P]phosphate incorporation is detected with the LEADseeker imaging system of Amersham Pharmacia Biotech. To improve the liquid handling procedures for imaging bead suspensions in the low microliter range, we developed a novel trough with an integrated stirring function. A comparison of the 1536-well assay to a 384-well assay revealed a comparable assay quality with Z' factors of about 0.7 for the 384-well format and 0.6 for the 1536-well format. In an automated screen of a random compound collection, 94.4% of the inhibitory compounds could be identified with both assay formats. Dose-response curves were performed for a selection of identified kinase inhibitors and revealed similar IC(50) values for both assay formats.     

An NS3 serine protease inhibitor abrogates replication of subgenomic hepatitis C virus RNA

The hepatitis C virus (HCV) NS3 protease is essential for polyprotein maturation and viral propagation, and it has been proposed as a suitable target for antiviral drug discovery. An N-terminal hexapeptide cleavage product of a dodecapeptide substrate identified as a weak competitive inhibitor of the NS3 protease activity was optimized to a potent and highly specific inhibitor of the enzyme. The effect of this potent NS3 protease inhibitor was evaluated on replication of subgenomic HCV RNA and compared with interferon-alpha (IFN-alpha), which is currently used in the treatment of HCV-infected patients. Treatment of replicon-containing cells with the NS3 protease inhibitor or IFN-alpha showed a dose-dependent decrease in subgenomic HCV RNA that reached undetectable levels following a 14-day treatment. Kinetic studies in the presence of either NS3 protease inhibitor or IFN-alpha also revealed similar profiles in HCV RNA decay with half-lives of 11 and 14 h, respectively. The finding that an antiviral specifically targeting the NS3 protease activity inhibits HCV RNA replication further validates the NS3 enzyme as a prime target for drug discovery and supports the development of NS3 protease inhibitors as a novel therapeutic approach for HCV infection.