ULTRASTRUCTURE OF THE CORALLINACEAE (RHODOPHYTA) II. VEGETATIVE CELLS OF LITHOTHRIX ASPERGILLUM1

The ultrastructure of the calcareous red coralline alga Lithothrix aspergillum Gray and the development of the various tissue types has been studied. The sub-apical meristematic tissue alternately produces genicular or intergenicular cells. The genicular cells rapidly elongate and their cell walls thicken and become denser as more fibrillar wall material is laid down within the cell wall. These cells contain little cytoplasm and few organelles. The inter genicular cells which elongate only slightly during development have a small vacuole and many free starch grains in the cytoplasm. The peripheral cells in each inter genicular layer remain meristematic and form a cortical cell layer over the genicular cells. These cortical cells and the apical meristematic cells are covered by small epidermal cells which have extensive cell wall ingrowths between the chloroplasts. The inter genicular cells are calcified. Although the CaCO₃ is laid down within the cell walls, there is always a thin layer of CaCO₃-free organic cell wall material between the plasmalemma and the CaCO₃ impregnated wall. Only the distal tips of the genicular cells are calcified. In old genicular tissues of Lithothrix, secondary deposits of CaCO₃ of unknown crystallography are also found in the spaces between the cell walls. Thus there appear to be at least two mechanisms of calcification in this alga.     

DIFFERENCES IN POLYSACCHARIDE STRUCTURE BETWEEN CALCIFIED AND UNCALCIFIED SEGMENTS IN THE CORALLINE CALLIARTHRON CHEILOSPORIOIDES (CORALLINALES,RHODOPHYTA)1

The articulated coralline Calliarthron cheilosporioides Manza produces segmented fronds composed of calcified segments (intergenicula) separated by uncalcified joints (genicula), which allow fronds to bend and reorient under breaking waves in the wave‐swept intertidal zone. Genicula are formed when calcified cells decalcify and restructure to create flexible tissue. The present study has identified important differences in the main agaran disaccharidic repeating units [→3)‐β‐d ‐Galp (1→ 4)‐α‐l ‐Galp(1→] synthesized by genicular and intergenicular segments. Based on chemical and spectroscopical analyses, we report that genicular cells from C. cheilosporioides biosynthesize a highly methoxylated galactan at C‐6 position with low levels of branching with xylose side stubs on C‐6 of the [→3)‐β‐d ‐Galp (1→] units, whereas intergenicular segments produce xylogalactans with high levels of xylose and low levels of 6‐O‐methyl β‐d ‐Gal units. These data suggest that, during genicular development, xylosyl branched, 3‐linked β‐d ‐Galp units present in the xylogalactan backbones from intergenicular walls are mostly replaced by 6‐O‐methyl‐d‐ galactose units. We speculate that this structural shift is a consequence of a putative and specific methoxyl transferase that blocks the xylosylation on C‐6 of the 3‐linked β‐d ‐Galp units. Changes in galactan substitutions may contribute to the distinct mechanical properties of genicula and may lend insight into the calcification process in coralline algae.     

Effects of glucanase treatment on the structure and mechanical properties of cell walls in the giant‐celled xanthophycean alga Vaucheria frigida

The cell wall of the tip‐growing cells of the giant‐cellular xanthophycean alga Vaucheria frigida is mainly composed of cellulose microfibrils (CMFs) arranged in random directions and the major matrix component into which the CMFs are embedded throughout the cell. The mechanical properties of a cell‐wall fragment isolated from the tip‐growing region, which was inflated by artificially applied pressure, were measured after enzymatic removal of the matrix component by using a protease; the results showed that the matrix component is involved in the maintenance of cell wall strength. Since glucose and uronic acid are present in the matrix component of Vaucheria cell walls, we measured the mechanical properties of the cell wall after treatment with endo‐1,3‐ß‐glucanase and observed the fine structures of its surfaces by atomic force microscopy. The major matrix component was partially removed from the cell wall by glucanase, and the enzyme treatment significantly weakened the cell wall strength without affecting the pH dependence of cell wall extensibility. The enzymatic removal of the major matrix component by using a protease released polysaccharide containing glucose and glucuronic acid. This suggests that the major matrix component of the algal cell walls contains both proteins (or polypeptides) and polysaccharides consisting of glucose and glucuronic acid as the main constituents.     

Cell wall chemistry and tissue structure underlie shifts in material properties of a perennial kelp

Laminaria is an abundant kelp genus in temperate nearshore ecosystems that grows with a circannual ‘stop-start’ pattern. Species of Laminaria play important ecological roles in kelp forests worldwide and are harvested commercially as a source of food and valuable extracts. In order to evaluate seasonal differences in tissue properties and composition, we compared the material properties, histology and cell-wall composition of overwintering blades with newly synthesized, actively growing blades from Laminaria setchellii. We found that overwintering blades were fortified with a thicker cortex and increased cell wall investment, leading to increased material strength. Overwintering tissues were composed of higher proportions of cellulose and fucose-containing polysaccharides (i.e. FCSPs, fucoidans) than newly formed blades and were found to possess thicker cell walls, likely to withstand the waves of winter storms. Chemical cell wall profiling revealed that significant proportions of fucose were associated with cellulose, especially in overwintering tissues, confirming the association between cellulose and some fucose-containing polysaccharides. Changes in material properties during the resting phase may allow these kelps to retain their non-growing blades through several months of winter storms. The results of this study demonstrate how one species might regulate its material properties seasonally, and at the same time shed light on the mechanisms that might control the material properties of kelps in general.     

Ultrastructure at the Host-Parasite Interface of Phytophthora capsici in Roots and Stems of Capsicum annuum

The infecting hyphae of Phytophthora capsici grew intercellularly in infected tissues of roots and stems of pepper (Capsicum annuum). The vascular tissues were not markedly disorganized even when heavily infected. Intercellularly growing hyphae penetrated the host cells by forming haustorium-like bodies. The consistent features of ultrastructural changes in infected tissues of pepper roots and stems were degeneration of cell organelles and dissolution of host cell walls. The cytoplasm detached from the cell wall aggregated abundantly around some haustorium-like bodies or the penetration sites of fungal hyphae. The host cell walls were palely stained, thinned and swollen, possibly being biochemically altered by the action of fungal macerating enzymes. Electron-dense, wall-like material was apposed on the outer wall of xylem vessel contacted by fungal hyphae. The infecting hyphae were also surrounded by granular, dark-staining cytoplasm. Characteristics of host cell responses to the invading P. capsici were the deposition of papilla-like material on host cell walls next to hyphae and the encasement of haustorium-like bodies with wall appositions.     

Bending strategies of convergently evolved,articulated coralline algae

The evolution of uncalcified genicula in upright calcified corallines has occurred at least three times independently, resulting in articulated corallines within Corallinoideae, Lithophylloideae, and Metagoniolithoideae. Genicula confer flexibility to otherwise rigid thalli, and the localization of bending at discrete intervals amplifies bending stress in genicular tissue. Genicular morphology must, therefore, be balanced between maintaining flexibility while mitigating or resisting stress. Genicula in the three articulated lineages differ in both cellular construction and development, which may result in different constraints on morphology. By studying the interaction between flexibility and morphological variation in multiple species, we investigate whether representatives of convergently evolving clades follow similar strategies to generate mechanically successful articulated fronds. By using computational models to explore different bending strategies, we show that there are multiple ways to generate flexibility in upright corallines but not all morphological strategies are mechanically equivalent. Corallinoids have many joints, lithophylloids have pliant joints, and metagoniolithoids have longer joints—while these strategies can lead to comparable thallus flexibility, they also lead to different levels of stress amplification in bending. Moreover, genicula at greatest risk of stress amplification are typically the strongest, universally mitigating the trade‐off between flexibility and stress reduction.     

Settlement and post-settlement processes limit the abundance of the geniculate coralline alga Calliarthron on subtidal walls

Cover of geniculate coralline algae is significantly greater on subtidal platforms than on vertical walls in a central California kelp forest. To determine the cause(s) of this pattern, settlement and growth of Calliarthron were compared on horizontal and vertical substrata attached to platforms or walls. Recruitment on horizontal substrata attached to reef walls indicated that spores were abundant along the walls. Densities of recruits were significantly smaller on vertical substrata attached to walls than on horizontal substrata attached to platforms, indicating that Calliarthron settlement is reduced on vertical substrata. Growth of basal crusts and the densities of fronds were also significantly greater on horizontal substrata attached to platforms than on vertical substrata attached to walls. Irradiance reaching wall surfaces was less than irradiance reaching platform surfaces. We suggest that light reaching wall surface is low enough to affect Calliarthron growth. These results indicate that the low abundance of Calliarthron on subtidal walls is a result of poor recruitment and slow growth.     

MECHANICAL BEHAVIOR OF PLANT TISSUES AS INFERRED FROM THE THEORY OF PRESSURIZED CELLULAR SOLIDS

The mechanical behavior of plant tissues and its dependency on tissue geometry and turgor pressure are analytically dealt with in terms of the theory of cellular solids. A cellular solid is any material whose matter is distributed in the form of beamlike struts or complete “cell” walls. Therefore, its relative density is less than one and typically less than 0.3. Relative density is the ratio of the density of the cellular solid to the density of its constitutive (“cell wall”) material. Relative density depends upon cell shape and the density of cell wall material. It largely influences the mechanical behavior of cellular solids. Additional important parameters to mechanical behavior are the elastic modulus of “cell walls” and the magnitude of internal “cell” pressure. Analyses indicate that two “stiffening” agents operate in natural cellular solids (plant tissues): 1) cell wall infrastructure and 2) the hydrostatic influence of the protoplasm within each cellular compartment. The elastic modulus measured from a living tissue sample is the consequence of both agents. Therefore, the mechanical properties of living tissues are dependent upon the magnitude of turgor pressure. High turgor pressure places cell walls into axial tension, reduces the magnitude of cell wall deformations under an applied stress, and hence increases the apparent elastic modulus of the tissue. In the absence of turgid protoplasts or in the case of dead tissues, the cell wall infrastructure will respond as a linear elastic, nonlinear elastic, or “densifying” material (under compression) dependent upon the magnitude of externally applied stress. Accordingly, it is proposed that no single tangent (elastic) modulus from a stress-strain curve of a plant tissue is sufficient to characterize the material properties of a sample. It is also suggested that when a modulus is calculated that it be referred to as the tissue composite modulus to distinguish it from the elastic modulus of a noncellular solid material.     

Coordinated action of β‐galactosidases in the cell wall of embryonic axes during chickpea germination and seedling growth

The plant cell wall is a dynamic structure whose constant modification is necessary for plant cells to grow and divide. In the cell walls of chickpea (Cicer arietinum) there are at least four β‐galactosidases, whose presence and location in embryonic axes during the first 48 h of seed imbibition are discussed in this paper. We examined their roles as cell wall‐modifying enzymes in germinative and/or post‐germinative events. At the start of germination, only βV‐Gal, and to a lesser extent βIV‐Gal, appear in the axes before rupture of the testa, suggesting they are related to germination sensu stricto. Once the testa has broken, the four β‐galactosidases are involved in growth and differentiation of the axes. Immunolocation of the different proteins in axes, which in part confirms previous results in seedlings and plants, allows assignment of post‐germinative roles to βI‐Gal and βIII‐Gal as cell wall modifiers in vascular tissue elements. βIV‐Gal and βV‐Gal participate in the initial events of germination in which cell walls are involved: βV‐Gal in cell proliferation, detachment of root cap cells and initial vascular tissue differentiation; both of them in xylem maturation; and βIV‐Gal in thickening of the primary cell wall. Together with other cell wall‐modifying enzymes, such as expansins and XTH, chickpea galactosidases might function in a sequential order in turnover of the primary cell wall, allowing the elongation of embryonic axes during seed germination.     

Resistance of wheat aleurone cell walls to acid and xylanase action

Isolated wheat (Triticum aestivum var. Potam) aleurone layers have a high capacity to acidify their environment, and secrete hydrolytic enzymes (endoxylanase, glucanase, α-amylase, proteases, etc.) under the control of GA₃. Acidic pH and xylanases are found to be essential for cell wall relaxation in growing tissues, but aleurone is a non-growing, non-dividing tissue. In this tissue, we studied the effect of these loosening factors on aleurone cell walls.Exposure to pH 3.0 caused the release of carbohydrates and calcium ions from the pericarp, and a small amount of carbohydrates, mainly polysaccharides, from aleurone layers from which pericarp tissue had been removed. 50 percnt; of the total sugars released into the incubation medium by these isolated aleurone tissue was arabinose, but no xylose, calcium ions, or phenolic compounds were found. Acid preincubation decreased by 30 percnt; the susceptibility of aleurone cell walls to degradation by exogenously-applied endoxylanase, and also modified the architecture of cell wall as observed by autofluorescence of phenolic groups. These findings suggest that acid treatment and endoxylanase action, rather than having a loosening effect on aleurone cell wall, can have an opposite effect, increasing the resistance of aleurone cell walls to loosening.     

Dodder hyphae invade the host: a structural and immunocytochemical characterization

Summary.  Dodder (Cuscuta pentagona) hyphae are unique amongst the parasitic weeds for their ability to apparently grow through the walls of the host plant. Closer examination reveals, however, that the hyphae do not grow through the host but rather induce the host to form a new cell wall (or extend the existing wall) to coat the growing hypha. This chimeric wall composed of walls from two species is even traversed by plasmodesmata that connect the two cytoplasms. Compositionally, the chimeric wall is quite different from the walls of either the host or in other cells of the dodder plant, on the basis of immunocytochemical labeling. The most striking differences were in the pectins, with much stronger labeling present in the chimeric wall than in either the host or other dodder walls. Interestingly, labeling with monoclonal antibodies specific to arabinan side chains of rhamnogalacturonan I pectin fraction was highly enriched in the chimeric wall, but antibodies to galactan side chains revealed no labeling. Arabinogalactan protein antibodies labeled the plasma membrane and vesicles at the tips of the hyphae and the complementary host wall, although the JIM8-reactive epitope, associated with very lipophilic arabinogalactan proteins, was found only in dodder cells and not the host. Callose was found in the plasmodesmata and along the forming hyphal wall but was found at low levels in the host wall. The low level of host wall labeling with anticallose indicates that a typical woundlike response was not induced by the dodder. When dodder infects leaf lamina, which have more abundant intercellular spaces than petioles or shoots, the hyphae grew both intra- and extracellularly. In the latter condition, a host wall did not ensheath the parasite and there was clear degradation of the host middle lamellae by the growing hyphae, allowing the dodder to pass between cells. These data indicate that the chimeric walls formed from the growth of the host cell wall in concert with the developing hyphae are unique in composition and structure and represent an induction of a wall type in the host that is not noted in surrounding walls. Received February 1, 2002; accepted July 8, 2002; published online November 29, 2002     

Development of thallus axes in Usnea longissima (Parmeliaceae, Ascomycota), a fruticose lichen showing diffuse growth

? Premise of the study: While cell wall thickening in plants is generally associated with tissue maturation, fungal tissues in at least two lichens continue to grow extensively while accumulating massively thickened cell walls. We examined Usnea longissima to determine how diffuse growth shapes morphological and anatomical development of thallus axes and how the highly thickened cell walls of the central cord behave in diffuse growth. ? Methods: Fresh material was examined with light and epifluorescence microscopy and conventional and low-temperature SEM. Fixed material was embedded in Spurr's resin, microtome-sectioned, and examined with TEM and light microscopy. ? Key results: Main axes consisted essentially of bare medullary cord tissue; their characteristic morphology developed by destruction of the overlying cortex and consequent stimulation of lateral branch formation. Fungal cells of the cord tissue continually deposited wall layers of electron-transparent substances and layered, electron-dense materials that include UV-epifluorescent components. Discontinuities were evident in the outermost layers; new branch cells grew through wall materials accumulated by older neighboring cells. ? Conclusions: Sustained diffuse growth of cord tissue in U. longissima underlies the structural transformation of a corticated thallus branch into a long axis. In the cord tissue, diffuse growth may be responsible for the increasingly disrupted appearance of the older, electron-dense cell wall layers, while new wall materials are laid down adjacent to the protoplast. Cell and tissue development appeared comparable to that observed previously in Ramalina menziesii, although accumulation of wall material was somewhat less extensive and with a greater proportion of electron-dense/UV-epifluorescent components.     

Growth-induced water potentials may mobilize internal water for growth

Abstract. Wphen there is no external source of water, plants can grow by mobilizing internal water from nongrowing tissues. We investigated how this internal water moves by measuring continuously and simultaneously the water potential (ψ_w) of soybean ( Glycine max L. Merr.) seedlings in the upper, growing stem tissues and the lower, non-growing stem tissues. When external water was available to the roots, the stems grew rapidly and the ψ_w of the growing tissue was continually below that of the nongrowing tissue and the medium around the roots. This indicated that a growth-induced gradient in ψ_w favoured water movement from the external source to the growing cells. When the external source was removed, the ψ_w of the growing tissue remained constant for a time and the ψ_w of the nongrowing tissue decreased somewhat. Growth took place slowly as water was withdrawn from the nongrowing tissue but ψ_w gradients continued to favour water transport to the growing cells. On the other hand, if this internal source was removed by excision, growth ceased abruptly. In this case, the cell walls relaxed and the ψ_w of the growing tissue decreased by about 0.1 MPa instead of remaining constant. The ψ_w of the detached nongrowing tissues remained constant instead of decreasing. This indicates not only that water mobilization required attached nongrowing or slowly growing tissues but also that mobilization affected wall relaxation. Thus, ψ_w differences may mobilize internal water, may explain the continued growth of plants and plant parts removed from external sources of water, and may account for discrepancies in measurements of cell wall properties in growing tissues.     

Collenchyma: a versatile mechanical tissue with dynamic cell walls

Background

Collenchyma has remained in the shadow of commercially exploited mechanical tissues such as wood and fibres, and therefore has received little attention since it was first described. However, collenchyma is highly dynamic, especially compared with sclerenchyma. It is the main supporting tissue of growing organs with walls thickening during and after elongation. In older organs, collenchyma may become more rigid due to changes in cell wall composition or may undergo sclerification through lignification of newly deposited cell wall material. While much is known about the systematic and organographic distribution of collenchyma, there is rather less information regarding the molecular architecture and properties of its cell walls.

Scope and conclusions

This review summarizes several aspects that have not previously been extensively discussed including the origin of the term ‘collenchyma’ and the history of its typology. As the cell walls of collenchyma largely determine the dynamic characteristics of this tissue, I summarize the current state of knowledge regarding their structure and molecular composition. Unfortunately, to date, detailed studies specifically focusing on collenchyma cell walls have not been undertaken. However, generating a more detailed understanding of the structural and compositional modifications associated with the transition from plastic to elastic collenchyma cell wall properties is likely to provide significant insights into how specific configurations of cell wall polymers result in specific functional properties. This approach, focusing on architecture and functional properties, is likely to provide improved clarity on the controversial definition of collenchyma.     

Cell wall formation in yeast

Summary Incorporation of tritiated glucose into cell walls of growingSaccharomyces cerevisiac andSchizosaccharomyces pombe was studied using electron microscopic autoradiography. The pattern and the extent of labelling ofS. cerevisiae cell walls depended on the cell stage in the cell cycle. Quantitative evaluation of autoradiographs showed that the highest rate of wall synthesis took place during bud growth. The incorporation of new material into the wall of growing bud showed an increasing rate with the magnitude of the bud. The incorporation into the mother cell wall was almost negligible during bud growth. The rate of wall synthesis in double cells decreased during cell division. This period and that before new bud initiation was found to be the time of substantially reduced rate of wall replication inS. cerevisiae. A significant random incorporation was observed into the walls of post-division adult cells, both parental and daughter. The cell walls ofS. pombe were labelled almost exclusively at growing tips. The incorporation of tritiated carbohydrates into non-extensile regions ofS. pombe cell walls was found to be only about 5% of the total wall labelling.     

Cell wall and cell growth characteristics of giant‐celled algae

Because of their large sizes and simple shapes, giant‐celled algae have been used to study how the structural and mechanical properties of cell walls influence cell growth. Here we review known relationships between cell wall and cell growth properties that are characteristic of three representative taxa of giant‐celled algae, namely, Valonia ventricosa, internodal cells of characean algae, and Vaucheria frigida. Tip‐growing cells of the genus Vaucheria differ from cells undergoing diffuse growth in V. ventricosa and characean algae in terms of their basic architectures (non‐lamellate vs. multilamellate) and their dependence upon pH and Ca²⁺ for cell wall extensibility. To further understand the mechanisms controlling cell growth by cell walls, comparative analyses of cell wall structures and/or associated growth modes will be useful. The giant‐celled algae potentially serve as good models for such investigations because of their wide variety of developmental processes and cell shapes exhibited.     

The initiation of cell wall synthesis in parasynchronous cultures of Schizosaccharomyces pombe

Summary Schizosaccharomyces pombe has been grown in parasynchronous culture to study the synthesis of cell wall material. After a lag period of 2.5h following inoculation the cells began to grow, as measured by optical density, dry weight and cell size. The cell number remained constant until 4.5h after inoculation when approximately 70% of the population divided synchronously. Immunofluorescence studies of the growing cells have shown that new wall material is inserted at the cell apices from 2.5 h after inoculation; this result is supported by radio-isotope labelling data which indicated that synthesis of new cell wall material also commenced 2.5 h after inoculation. The incorporation experiments also demonstrated an interruption in cell wall synthesis during the cell separation stage. The composition of the cell wall material varied during the growth cycle, with maximum nitrogen levels at inoculation and following cell division. No serological differences could be detected in the cell walls during the growth cycle.     

Characterization of the Sclerotinia sclerotiorum cell wall proteome

We used a proteomic analysis to identify cell wall proteins released from Sclerotinia sclerotiorum hyphal and sclerotial cell walls via a trifluoromethanesulfonic acid (TFMS) digestion. Cell walls from hyphae grown in Vogel's glucose medium (a synthetic medium lacking plant materials), from hyphae grown in potato dextrose broth and from sclerotia produced on potato dextrose agar were used in the analysis. Under the conditions used, TFMS digests the glycosidic linkages in the cell walls to release intact cell wall proteins. The analysis identified 24 glycosylphosphatidylinositol (GPI)‐anchored cell wall proteins and 30 non‐GPI‐anchored cell wall proteins. We found that the cell walls contained an array of cell wall biosynthetic enzymes similar to those found in the cell walls of other fungi. When comparing the proteins in hyphal cell walls grown in potato dextrose broth with those in hyphal cell walls grown in the absence of plant material, it was found that a core group of cell wall biosynthetic proteins and some proteins associated with pathogenicity (secreted cellulases, pectin lyases, glucosidases and proteases) were expressed in both types of hyphae. The hyphae grown in potato dextrose broth contained a number of additional proteins (laccases, oxalate decarboxylase, peroxidase, polysaccharide deacetylase and several proteins unique to Sclerotinia and Botrytis) that might facilitate growth on a plant host. A comparison of the proteins in the sclerotial cell wall with the proteins in the hyphal cell wall demonstrated that sclerotia formation is not marked by a major shift in the composition of cell wall protein. We found that the S. sclerotiorum cell walls contained 11 cell wall proteins that were encoded only in Sclerotinia and Botrytis genomes.     

Infection of Onion by the White Rot Pathogen, Sclerotium cepivorum

Infection of onion tissue by Sclerotium cepivorum occurred from germ tubes penetrating between adjacent epidermal cell walls or directly, via penetration pegs produced from slightly swollen hyphal tips or from beneath dome shaped infection cushions. After passing through the cuticle, the infection peg enlarged to form an infection hypha within the primary cell wall. Extensive degradation of the epidermal cell wall occurred, often at a distance of 2–3 cells from the advancing hyphae. As infection advanced, hyphae spread rapidly from the epidermis to the cortex growing between and within dead/dying host cells. Extensive host cell death resulted in localized collapse of the tissue around infection points. Complete colonization of the internal tissues of the root and stem base occurred within 5–7 days of inoculation.