The structure of denatured bovine pancreatic trypsin inhibitor (BPTI)

In the presence of denaturant and thiol initiator, the native bovine pancreatic trypsin inhibitor (BPTI) denatures by shuffling its native disulfide bonds and converts to a mixture of scrambled isomers. The extent of denaturation is evaluated by the relative yields of the scrambled and native species of BPTI. BPTI is an exceedingly stable molecule and can be effectively denatured only by guanidine thiocyanate (GdmSCN) at concentrations higher than 3-4 M. The denatured BPTI consists of at least eight fractions of scrambled isomers. Their composition varies under increasing concentrations of GdmSCN. In the presence of 6 M GdmSCN, the most predominant fraction of scrambled BPTI accounts for 56% of the total structure of denatured BPTI. Structural analysis reveals that this predominant fraction contains the bead-form isomer of scrambled BPTI, bridged by three pairs of neighboring cysteines, Cys5-Cys14, Cys30-Cys38 and Cys51-Cys55. The extreme conformational stability of BPTI has important implications in its distinctive folding pathway.     

Human gene 2 relaxin chain combination and folding

Relaxin is a small 6 kD two-chain peptide member of the insulin superfamily that is principally produced in the corpus luteum of the ovary and which plays a key role in connective tissue remodeling during parturition. Like insulin, it is produced on the ribosome as preprohormone that undergoes oxidative folding and subsequent proteolytic processing to yield the mature insulin-like peptide. In contrast to the now considerable insight into insulin chain folding and oxidation, comparatively little is known about the folding pathway of relaxin. A series of synthetic pairwise serine substituted relaxin A-chain cysteine analogues was prepared, and their oxidation behavior was studied both on their own and in the presence of native relaxin B-chain. It was observed that native S-reduced A-chain oxidized rapidly to a bicyclic product, whereas individual formation of each of the intramolecular disulfide bonds between Cys11 and Cys24 and the native Cys10 and Cys15 was considerably slower. Curiously, the non-native, isomeric Cys11-Cys15 disulfide bond formed most rapidly, although circular dichroism spectroscopy analysis showed this product to be devoid of secondary structure. This suggested that it may in fact be an intermediate in the subsequent formation of the native Cys10-Cys15 intramolecular disulfide. Combination of the native A-chain with the B-chain proceeded rapidly as compared with the A-chain analogue that lacked the intramolecular disulfide bond suggesting that this latter element is required as a first step in the folding process. It is therefore probable that relaxin is generated from its constituent A- and B-chains in a stepwise organization manner similar to that of insulin chain combination and folding. Further studies showed that the efficiency of combination of A-chain to B-chain was not markedly influenced by reaction temperature and that a reasonable yield of relaxin could be obtained on combination of the preoxidized A-chain with the S-reduced B-chain.     

Conformational stability of secretory leucocyte protease inhibitor: a protein with no hydrophobic core and very little secondary structure

Conformational stability of proteins (including disulfide containing proteins) has been routinely characterized by spectroscopic techniques. Proteins which lack adequate signal of circular dichroism may require unconventional technique. Secretory Leucocyte Protease Inhibitor (SLPI) is a 107 amino acids protein with a high density of disulfide pairing (eight). The native SLPI has no hydrophobic core and contains very little hydrogen bonded secondary structure [Gruetter, M., Fendrich, G., Huber, R., and Bode, W. (1988) The 2.5 A X-ray crystal structure of the acid stable proteinase inhibitor from human mucous secretions analyzed in its complex with bovine alpha-chymotrypsin. The EMBO J. 7, 345-352.]. In this study, conformational stability of SLPI has been investigated by the method of disulfide scrambling, which permits quantification of the native and denatured (scrambled) proteins by HPLC. Due to high heterogeneity of denatured SLPI, the native and scrambled SLPI are extensively overlapped on HPLC. This impediment was further overcome by the development of a novel method which distinguishes the native and scrambled isomers of SLPI by exploiting the relative stability of their disulfide bonds. The study reveals mid-point denaturation of SLPI at 1.36 M of GdmSCN, 4.0 M of GdmCl and >8 M urea. Based on the GdmCl denaturation curve, the unfolding free energy (DeltaG(H20)) of SLPI was estimated to be 4.56 kcal/mol. The results of our studies suggest an alternative strategy for analyzing conformational stability of disulfide proteins that are not suitable to the conventional spectroscopic techniques.     

Structural characterization of a rhamnose-binding glycoprotein (lectin) from Spanish mackerel (Scomberomorous niphonius) eggs

A rhamnose-binding glycoprotein (lectin), named SML, was isolated from the eggs of Spanish mackerel (Scomberomorous niphonius) by affinity and ion-exchange chromatographies. SML was composed of a non-covalently linked homodimer. The SML subunit was composed of 201 amino acid residues with two tandemly repeated domains, and contained 8 half-Cys residues in each domain, which is highly homologous to the N-terminal lectin domain of calcium-independent alpha-latrotoxin receptor in mammalian brains. Each domain has the same disulfide bonding pattern; Cys10-Cys40, Cys20-Cys99, Cys54-Cys86 and Cys67-Cys73 were located in the N-terminal domain, and Cys108-Cys138, Cys117-Cys195, Cys152-Cys182 and Cys163-Cys169 were in the C-terminal domain. SML was N-glycosylated at Asn168 in the C-terminal domain. The structure of the sugar chain was determined to be NeuAc-Galbeta1-4GlcNAcbeta1-2Manalpha1-6-(NeuAc-Galbeta1-4GlcNAcbeta1-2Manalpha1-3)Manbeta1-4GlcNAcbeta1-4GlcNAc-Asn.     

A comparison of folding techniques in the chemical synthesis of the epidermal growth factor-like domain in neu differentiation factor alpha/beta.

The 52-residue alpha/beta chimera of the epidermal growth factor-like domain in neu differentiation factor (NDFealpha/beta) has been synthesized and folded to form a three disulfide bridge (Cys182-Cys196, Cys190-Cys210, Cys212-Cys221) containing peptide. We investigated two general strategies for the formation of the intramolecular disulfide bridges including, the single-step approach, which used fully deprotected and reduced peptide, and a sequential approach that relied on orthogonal cysteine protection in which specific pairs are excluded from the first oxidation step. Because there are 15 possible disulfide bridge arrangements in a peptide with six cysteines, the one-step approach may not always provide the desired disulfide pairing. Here, we compare the single-step approach with a systematic evaluation of the sequential approach. We employed the acetamidomethyl group to protect each pair of cysteines involved in disulfide bridges, i.e. Cys182 to Cys196, Cys190 to Cys210 and Cys212 to Cys221. This reduced the number of possible disulfide patterns from 15 to three in the first folding step. We compared the efficiencies of folding for each protected pair using RP-HPLC, mapped the disulfide connectivity of the predominant product and then formed the final disulfide from the partially folded intermediate via 12 oxidation. Only the peptide having the Cys182-Cys196 pair blocked with acetamidomethyl forms the desired disulfide isomer (Cys190-Cys210/Cys212-Cys221) as a single homogeneous product. By optimizing both approaches, as well as other steps in the synthesis, we can now rapidly provide large-scale syntheses of NDFealpha/beta and other novel EGF-like peptides.     

The unfolding pathway and conformational stability of potato carboxypeptidase inhibitor

The unfolding and denaturation curves of potato carboxypeptidase inhibitor (PCI) were investigated using the technique of disulfide scrambling. In the presence of denaturant and thiol initiator, the native PCI denatures by shuffling its native disulfide bonds and converts to form a mixture of scrambled PCI that consists of 9 out of a possible 14 isomers. The denaturation curve is determined by the fraction of native PCI converted to scrambled isomers under increasing concentrations of denaturant. The concentration of guanidine thiocyanate, guanidine hydrochloride, and urea required to denature 50% of the native PCI was found to be 0.7, 1.45, and 8 m, respectively. The PCI unfolding curve was constructed through the analysis of structures of scrambled isomers that were denatured under increasing concentrations of denaturant. These results reveal the existence of structurally defined unfolding intermediates and a progressive expansion of the polypeptide chain. The yield of the beads-form isomer (Cys(8)-Cys(12), Cys(18)-Cys(24), and Cys(27)-Cys(34)) as a fraction of total denatured PCI was shown to be directly proportional to the strength of the denaturing condition. Furthermore, the PCI sequence was unable to fold quantitatively into a single native structure. Under physiological conditions, the scrambled isomers of PCI that constitute about 4% of the protein were in equilibrium with native PCI.     

Features of the structure of catalytic subunits of toxins, inhibiting protein synthesis. I. The effect of pH and interaction with the B-chain of ricin

A comparative study of gelonin and A-chains of ricin, mistletoe lectin I and diphtheria toxin was undertaken. The effect of pH was studied on: a) the conformation of the proteins under study using intrinsic fluorescence; b) interaction of these proteins with ricin B-chain using gel-filtration. Structural stability of the proteins was assessed according to denaturing action of guanidine hydrochloride and temperature, and localization of tryptophan residues was determined using fluorescence quenching by I-, Cs+ and acrylamide. All investigated proteins were shown to undergo the conformational changes when a environment became acidic. In comparison with an intact protein--gelonin, the A-chains of ricin, a mistletoe lectin and a diphtheria toxin are less stable. At pH less than 5.0 tryptophan residues became more accessible to quencher and a positive charge of the surrounding area increases (in the case of gelonin it is negatively charged). No reliable interaction of a ricin B-chain with both gelonin and A-chain of diphtheria toxin was observed. The interaction of a ricin B-chain with a A-chain of mistletoe lectin I is weaker than that with ricin A-chain and is practically pH-independent.     

Entropic folding pathway of human epidermal growth factor explored by disulfide scrambling and amplified collective motion simulations

Epidermal growth factor (EGF) regulates cell proliferation and differentiation by binding to the EGF receptor (EGFR) extra-cellular domains. Human EGF is a small, single-chain protein comprising three distinct loops (A, B, and C), which are connected by three disulfide bridges (Cys6-Cys20, Cys14-Cys31, and Cys33-Cys42). These disulfide bridges are essential for structural stability and biological activity. EGF was extensively studied by disulfide scrambling, an experimental technique for the conformational entrapment of intermediate states, which allows us to study the folding pathway of proteins containing disulfide bonds. The experimental results showed that there is a major 2-disulfide intermediate (denoted EGF-II) and that the native disulfide bonding pattern is less prevalent in one of the mutants. In this article, we investigated for the first time the solution conformations of wild-type EGF, EGF-II, and the mutant S9C through extensive molecular dynamics (MD) simulations in water using both the standard MD technique and a recently developed amplified-collective-motion (ACM) sampling method. Compared to standard MD simulations, we achieved a much more enhanced sampling by the ACM simulations, and the structures were sufficiently relaxed to estimate configurational entropies. The simulation results suggest a predominantly entropic folding pathway governed by the disorder of three functional loop regions. Although EGF-II exhibits two native disulfide bonds (Cys14-Cys31 and Cys33- Cys42), its large configurational entropy inhibits a direct transition to the native structure in the folding process. When Ser9 is mutated into Cys, a non-native disulfide bridge Cys9- Cys20 is slightly more favorable than the native Cys6-Cys20 because a less constrained N-terminus affords larger entropy. Isomers that are functionally less active also exhibit a more localized dynamics of the functional loop regions, which may suggest a possible mechanism for the modulation of EGF activity.     

Contribution of disulfide bonds to the conformational stability and catalytic activity of ribonuclease A.

Disulfide bonds between the side chains of cysteine residues are the only common crosslinks in proteins. Bovine pancreatic ribonuclease A (RNase A) is a 124-residue enzyme that contains four interweaving disulfide bonds (Cys26-Cys84, Cys40-Cys95, Cys58-Cys110, and Cys65-Cys72) and catalyzes the cleavage of RNA. The contribution of each disulfide bond to the conformational stability and catalytic activity of RNase A has been determined by using variants in which each cystine is replaced independently with a pair of alanine residues. Thermal unfolding experiments monitored by ultraviolet spectroscopy and differential scanning calorimetry reveal that wild-type RNase A and each disulfide variant unfold in a two-state process and that each disulfide bond contributes substantially to conformational stability. The two terminal disulfide bonds in the amino-acid sequence (Cys26-Cys84 and Cys58-Cys110) enhance stability more than do the two embedded ones (Cys40-Cys95 and Cys65-Cys72). Removing either one of the terminal disulfide bonds liberates a similar number of residues and has a similar effect on conformational stability, decreasing the midpoint of the thermal transition by almost 40 degrees C. The disulfide variants catalyze the cleavage of poly(cytidylic acid) with values of kcat/Km that are 2- to 40-fold less than that of wild-type RNase A. The two embedded disulfide bonds, which are least important to conformational stability, are most important to catalytic activity. These embedded disulfide bonds likely contribute to the proper alignment of residues (such as Lys41 and Lys66) that are necessary for efficient catalysis of RNA cleavage.     

Structural and functional properties of human alpha-thrombin, phosphopyridoxylated alpha-thrombin, and gamma T-thrombin. Identification of lysyl residues in alpha-thrombin that are critical for heparin and fibrin(ogen) interactions

alpha-Thrombin derivatives obtained either by site-specific modification at lysyl residues (phosphopyridoxylated) or by limited trypsinolysis (gamma T-thrombin) were compared to correlate structural modifications with the functional reactivity toward fibrin(ogen) and heparin. alpha-Thrombin phosphopyridoxylated in the absence of heparin (unprotected) showed approximately 2 mol of label incorporated/mol of thrombin, but only 1 mol of label incorporated/mol of proteinase when modified in the presence of added heparin (protected). In contrast to native alpha-thrombin, both phosphopyridoxylated alpha-thrombin derivatives failed to interact with a fibrin monomer-agarose column and had reduced fibrinogen clotting activity, which is very similar to gamma T-thrombin. Heparin accelerated the rate of antithrombin III inhibition of alpha-thrombin, heparin-protected modified-alpha-thrombin, and gamma T-thrombin in a manner consistent with a template mechanism but was without effect on unprotected modified alpha-thrombin. In a heparin-catalyzed antithrombin III inhibition assay of alpha-thrombin, we found that D-Phe-Pro-Arg chloromethyl ketone-active site-inactivated gamma T-thrombin competed for heparin binding. It has been shown that limited proteolysis/autolysis of the B-chain of alpha-thrombin in the area around Arg-B73 (in beta T/beta- and gamma T/gamma-thrombin), but not that around Lys-B154 (in gamma T/gamma-thrombin), diminishes specific interactions with fibrinogen (Hofsteenge, J., Braun, P. J., and Stone , S. R. (1988) Biochemistry 27, 2144-2151). In unprotected modified alpha-thrombin, lysyl residues B21, B65, B174, and B252 were phosphopyridoxylated. In heparin-protected modified alpha-thrombin, only lysyl residues B21 and B65 were phosphopyridoxylated. These observations suggest that lysyl residues 21/65 of the B-chain of alpha-thrombin are involved in fibrin(ogen) interactions, and lysyl residues 174/252 of the B-chain are important in heparin interactions.     

Two-State Folding of Lysozyme Versus Multiple-State Folding of α-Lactalbumin Illustrated by the Technique of Disulfide Scrambling

The folding of lysozyme and of alpha-lactalbumin exhibits vastly different kinetics and pathways. Existing evidence indicates that folding intermediates of alphaLA form a well-populated equilibrium molten globule state that is absent in the case of hen lysozyme. We demonstrate here such divergent folding mechanisms of lysozyme and alphaLA using the technique of disulfide scrambling. Two extensively unfolded homologous isomers (beads-form) of lysozyme (Cys6-Cys30, Cys64-Cys76, Cys80-Cys94, Cys115-Cys127) and alphaLA (Cys6-Cys28, Cys61-Cys73, Cys77-Cys91, Cys111-Cys120) were allowed to refold in parallel to form the native protein. Folding kinetics was measured by the recovery of the native structure. Folding intermediates, which illustrate the folding pathway, were trapped by quenching disulfide shuffling and were analyzed by reversed-phase high-pressure liquid chromatography. The results revealed that under identical folding conditions, the folding rate of lysozyme is about 30-fold faster than that of alphaLA. Folding intermediates of lysozyme are far less heterogeneous and sparsely populated than those of alphaLA. Numerous predominant on-pathway and off-pathway intermediates observed along the folding pathway of alphaLA are conspicuously absent in the case of lysozyme. The difference is most striking under fast folding conditions performed in the presence of protein disulfide isomerase. Under these conditions, folding of lysozyme undergoes a near two-state mechanism without accumulation of stable folding intermediates.     

Identification of the disulfide bonds in human plasma protein SP-40,40 (apolipoprotein-J).

SP-40,40, a human plasma protein, is a modulator of the membrane attack complex formation of the complement system as well as a subcomponent of high-density lipoproteins. In the present study, the positions of the disulfide bonds in SP-40,40 were determined. SP-40,40 was purified from human seminal plasma by affinity chromatography using an anti-SP-40,40 monoclonal antibody and reversed-phase, high-performance liquid chromatography (HPLC). The protein was digested with trypsin and the fragments were separated by reversed-phase HPLC. The peptides containing disulfide bonds were fluorophotometrically detected with 4-(aminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (ABD-F). The peptides containing more than two disulfide bonds were further digested with Staphylococcus aureus V8 protease and lysylendopeptidase, and the fragments were isolated by HPLC. The amino acid compositions and the amino acid sequences of the peptides containing only a disulfide bond were determined. Disulfide bonds thus determined were between Cys58(alpha)-Cys107(beta), Cys68(alpha)-Cys99(beta), Cys75(alpha)-Cys94(beta), and Cys86(alpha)-Cys80(beta). Since there was no free sulfhydryl groups in the SP-40,40 molecule, Cys78(alpha) and Cys91(beta) should also be linked by a disulfide bond. It is notable that all of the disulfide bonds in SP-40,40 are not only formed by inter-chain pairing, but also appear to form an antiparallel ladder-like structure between the two chains. The unique structure could be related to the functions of SP-40,40.     

Isomers of epidermal growth factor with Ser --> Cys mutation at the N-terminal sequence: isomerization, stability, unfolding, refolding, and structure

The structure of human epidermal growth factor (EGF, 53 amino acids) comprises three distinct loops (A, B, and C) connected correspondingly by the three native disulfide bonds, Cys(6)-Cys(20), Cys(14)-Cys(31), and Cys(33)-Cys(42). The connection of Cys(6) and Cys(20) forming the N-terminal A loop is essential for the biological activity of EGF [Barnham et al. (1998) Protein Sci. 7, 1738-1749] and has also been shown to represent a major kinetic trap in the oxidative folding of EGF [Chang et al. (2001) J. Biol. Chem. 276, 4845-4852]. To further understand the chemical nature of this kinetic trap, we have prepared three EGF mutants each with a single Ser --> Cys mutation at Ser residues (Ser(2), Ser(4), and Ser(9)) flanking Cys(6). This allows competition between Cys(6) and mutated Cys(2), Cys(4), and Cys(9) to link with Cys(20) and to form EGF isomers containing different sizes of the A loop. The results show that, in the cases of EGF(S2C) and EGF(S4C), native Cys(6)-Cys(20) is favored over Cys(2)-Cys(20) and Cys(4)-Cys(20) by 4.5- and 9-fold, respectively, in the state of equilibrium. However, in the case of EGF(S9C), a non-native Cys(9)-Cys(20) is thermodynamically more stable than the native Cys(6)-Cys(20) by a free-energy difference (DeltaG degrees ) of 1.12 kcal/mol. Implications of these data in the formation of kinetic trap of EGF folding are discussed. Stabilized isomers of EGF were further generated from denaturation of wild-type and mutant EGF via the method of disulfide scrambling. Properties of these diverse isomers of EGF, including their isomerization, stability, unfolding, refolding, and disulfide structures, are described in this paper.     

Role of disulfide bonds in goose-type lysozyme

The role of the two disulfide bonds (Cys4-Cys60 and Cys18-Cys29) in the activity and stability of goose-type (G-type) lysozyme was investigated using ostrich egg-white lysozyme as a model. Each of the two disulfide bonds was deleted separately or simultaneously by substituting both Cys residues with either Ser or Ala. No remarkable differences in secondary structure or catalytic activity were observed between the wild-type and mutant proteins. However, thermal and guanidine hydrochloride unfolding experiments revealed that the stabilities of mutants lacking one or both of the disulfide bonds were significantly decreased relative to those of the wild-type. The destabilization energies of mutant proteins agreed well with those predicted from entropic effects in the denatured state. The effects of deleting each disulfide bond on protein stability were found to be approximately additive, indicating that the individual disulfide bonds contribute to the stability of G-type lysozyme in an independent manner. Under reducing conditions, the thermal stability of the wild-type was decreased to a level nearly equivalent to that of a Cys-free mutant (C4S/C18S/C29S/C60S) in which all Cys residues were replaced by Ser. Moreover, the optimum temperature of the catalytic activity for the Cys-free mutant was downshifted by about 20 degrees C as compared with that of the wild-type. These results indicate that the formation of the two disulfide bonds is not essential for the correct folding into the catalytically active conformation, but is crucial for the structural stability of G-type lysozyme.     

Synthesis, and functional properties of a modified human insulin A-chain: implication in a 'mini-insulin' structure determination

The design and total synthesis of a novel insulin A-chain mutant, analogue 3, is reported. In this compound, the cysteines implied in the two insulin inter-chain disulfide bridges are replaced by two serines (residues Ser(A7) and Ser(A20)) and the intra-A-chain disulfide bridge (residues Cys(A6) and Cys(A11)) is conserved. This A-chain analogue (3) has been tested in three in vitro cell culture assays, using insulin as a reference. The data clearly showed that analogue 3 mimics insulin effects on DNA synthesis, glucose uptake and glycogen synthesis without loss of potency as compared to insulin. To our knowledge, these are the first results showing that an isolated insulin chain displays functional properties similar to those of insulin. The implication of these new findings in insulin structure-function relationships and in a 'mini-insulin' structure determination is discussed.     

Ribonuclease Sa conformational stability studied by NMR-monitored hydrogen exchange

The conformational stability of ribonuclease Sa (RNase Sa) has been measured at the per-residue level by NMR-monitored hydrogen exchange at pH* 5.5 and 30 degrees C. In these conditions, the exchange mechanism was found to be EXII. The conformational stability calculated from the slowest exchanging amide groups was found to be 8.8 kcal/mol, in close agreement with values determined by spectroscopic methods. RNase Sa is curiously rich in acidic residues (pI = 3.5) with most basic residues being concentrated in the active-site cleft. The effects of dissolved salts on the stability of RNase Sa was studied by thermal denaturation experiments in NaCl and GdmCl and by comparing hydrogen exchange rates in 0.25 M NaCl to water. The protein was found to be stabilized by salt, with the magnitude of the stabilization being influenced by the solvent exposure and local charge environment at individual amide groups. Amide hydrogen exchange was also measured in 0.25, 0.50, 0.75, and 1.00 M GdmCl to characterize the unfolding events that permit exchange. In contrast to other microbial ribonucleases studied to date, the most protected, globally exchanging amides in RNase Sa lie not chiefly in the central beta strands but in the 3/10 helix and an exterior beta strand. These structural elements are near the Cys7-Cys96 disulfide bond.     

Localization of carbohydrate attachment sites and disulfide bridges in limulus alpha 2-macroglobulin. Evidence for two forms differing primarily in their bait region sequences

The primary structure determination of the dimeric invertebrate alpha(2)-macroglobulin (alpha(2)M) from Limulus polyphemus has been completed by determining its sites of glycosylation and disulfide bridge pattern. Of seven potential glycosylation sites for N-linked glycosylation, six (Asn(275), Asn(307), Asn(866), Asn(896), Asn(1089), and Asn(1145)) carry common glucosamine-based carbohydrates groups, whereas one (Asn(80)) carries a carbohydrate chain containing both glucosamine and galactosamine. Nine disulfide bridges, which are homologues with bridges in human alpha(2)M, have been identified (Cys(228)-Cys(269), Cys(456)-Cys(580), Cys(612)-Cys(799), Cys(657)-Cys(707), Cys(849)-Cys(876), Cys(874)-Cys(910), Cys(946)-Cys(1328), Cys(1104)-Cys(1155), and Cys(1362)-Cys(1475)). In addition to these bridges, Limulus alpha(2)M contains three unique bridges that connect Cys(361) and Cys(382), Cys(1370) and Cys(1374), respectively, and Cys(719) in one subunit with the same residue in the other subunit of the dimer. The latter bridge forms the only interchain disulfide bridge in Limulus alpha(2)M. The location of this bridge within the bait region is discussed and compared with other alpha-macroglobulins. Several peptides identified in the course of determining the disulfide bridge pattern provided evidence for the existence of two forms of Limulus alpha(2)M. The two forms have a high degree of sequence identity, but they differ extensively in large parts of their bait regions suggesting that they have different inhibitory spectra. The two forms (Limulus alpha(2)M-1 and -2) are most likely present in an approximately 2:1 ratio in the hemolymph of each animal, and they can be partially separated on a Mono Q column at pH 7.4 by applying a shallow gradient of NaCl.     

Catalytically competent human and bovine zeta-thrombin and chimeras generated from unfolded polypeptide chains.

Human and bovine alpha-thrombin cleaved at the B-chain by chymotrypsin generates catalytically competent zeta-thrombins, which are comprised of two noncovalently linked fragments: a 36-(human) or 49-(bovine) residue A-chain linked by a disulfide to B-chain residues B1-148 (zeta 1-thrombin) and B-chain residues B149-259 (zeta 2-thrombin). Human and bovine D-Phe-Pro-Arg-CH2-zeta- and PhMeSO2-zeta-thrombins were prepared by reaction of the active-site histidine (H-B43) and serine (S-B205) with PPACK and PMSF, respectively. Unfolding and dissociation of the noncovalently linked polypeptide chains of either human or bovine D-Phe-Pro-Arg-CH2-zeta- and PhMeSO2-zeta-thrombins in 4.5 M guanidine-HCl and refolding upon 30-fold dilution in 50 mM sodium phosphate buffer pH 6.5, 750 mM NaCl, 0.1% PEG resulted in biphasic generation of catalytic activity. The slow phase was eliminated in the presence of the competitive inhibitor benzamidine-HCl. Unfolding and refolding mixtures of the appropriate inactive precursors generated the active chimeric thrombins bovine zeta 1-thrombin:human zeta 2-thrombin and human zeta 1-thrombin:bovine zeta 2-thrombin. Human zeta 1-thrombin and zeta 2-thrombin were isolated, and, upon recombining, the isolated fragments refolded to generate catalytically competent zeta-thrombin with an active-site content, specific activity toward Chromozym-TH, and a specificity constant (kcat/Km) for FPA release from fibrinogen that were all within 60% of those of native alpha-thrombin.(ABSTRACT TRUNCATED AT 250 WORDS)     

Heparin binding domain of human antithrombin III inferred from the sequential reduction of its three disulfide linkages. An efficient method for structural analysis of partially reduced proteins

Human antithrombin III (AT-III) was partially reduced under mild conditions in the absence or presence of low molecular weight heparin. Quantitation of reduced disulfide bonds was facilitated by the application of a water-soluble color reagent, 4-N,N-dimethylaminoazobenzene-4'-iodoacetamido-2'-sulfonic acid (S-DABIA). The study shows that the three disulfide linkages of AT-III can be sequentially reduced, with Cys8-Cys128 being the most sensitive, followed by Cys21-Cys95, while Cys247-Cys430 is the most resistant to the mild reduction conditions. The rate of reduction of Cys8-Cys128 and Cys21-Cys95 was significantly decreased in the presence of heparin. The reduction of Cys8-Cys128 was also found to correlate quantitatively with the loss of heparin-accelerated antithrombin activity, heparin binding affinity, and heparin-induced fluorescence enhancement. These results suggest that Cys8-Cys128 is required for the integrity of the heparin binding domain of AT-III and support previous findings that lysyl residues surrounding Cys128 (Lys107, Lys114, Lys125, and Lys136) constitute an important part of the heparin binding site in AT-III.     

Evidence for difference in the roles of two cysteine residues involved in disulfide bond formation in the folding of human lysozyme

Human lysozyme is made up of 130 amino acid residues and has four disulfide bonds at Cys6-Cys128, Cys30-Cys116, Cys65-Cys81, and Cys77-Cys95. Our previous results using the Saccharomyces cerevisiae secretion system indicate that the individual disulfide bonds of human lysozyme have different functions in the correct in vivo folding and enzymatic activity of the protein (Taniyama, Y., Yamamoto, Y., Nakao, M., Kikuchi, M., and Ikehara, M. (1988) Biochem. Biophys. Res. Commun. 152, 962-967). In this paper, we report the results of experiments that were focused on the roles of Cys65 and Cys81 in the folding of human lysozyme protein in yeast. A mutant protein (C81A), in which Cys81 was replaced with Ala, had almost the same enzymatic activity and conformation as those of the native enzyme. On the other hand, another mutant (C65A), in which Cys65 was replaced with Ala, was not found to fold correctly. These results indicate that Cys81 is not a requisite for both correct folding and activity, whereas Cys65 is indispensable. The mutant protein C81A is seen to contain a new, non-native disulfide bond at Cys65-Cys77. The possible occurrence of disulfide bond interchange during our mapping experiments cannot be ruled out by the experimental techniques presently available, but characterization of other mutant proteins and computer analysis suggest that the intramolecular exchange of disulfide bonds is present in the folding pathway of human lysozyme in vivo.