Map-based cloning in crop plants. Tomato as a model system: I. Genetic and physical mapping of jointless

A map-based cloning scheme is being used to isolate the jointless (j) gene of tomato. The jointless locus is defined by a single recessive mutation that completely suppresses the formation of the fruit and flower pedicel and peduncle abscission zone. jointless was mapped in an F₂ population of an interspecific cross between Lycopersicon esculentum and Lycopersicon pennellii to a 7.1 cM interval between two restriction fragment length polymorphism (RFLP) markers TG523 and TG194. Isogenic DNA pools were then constructed from a subset of the mapping population and screened with 800 random decamers for random amplification of polymorphic DNA (RAPD) polymorphisms. Five new RAPD markers were isolated and mapped to chromosome 11, two of which were mapped within the targeted interval. One marker, RPD158, was mapped 1.5 cM to the opposite side of jointless relative to TG523 and thus narrowed the interval between the closest flanking markers to 3.0 cM. Physical mapping by pulse-field gel electrophoresis using TG523 and RPD158 as probes demonstrated that both markers hybridize to a common 600 kb SmaI restriction fragment. This provided an estimate of 200 kb/cM for the relationship between physical and genetic distances in the region of chromosome 11 containing the j locus. The combined results provide evidence for the feasibility of the next step toward isolation of the jointless gene by map-based cloning — a chromosome walk or jump to jointless.     

Genetic analysis and FISH mapping of the Colourless non-ripening locus of tomato

Cnr (Colourless non-ripening) is a dominant pleiotropic ripening mutation of tomato (Lycopersicon esculentum) which has previously been mapped to the proximal region of tomato chromosome 2. We describe the fine mapping of the Cnr locus using both linkage analysis and fluorescence in situ hybridisation (FISH). Restriction fragment length polymorphism (RFLP)-, amplified restriction fragment polymorphism (AFLP)-, and cleaved amplified polymorphic sequence (CAPS)-based markers, linked to the Cnr locus were mapped onto the long arm of chromosome 2. Detailed linkage analysis indicated that the Cnr locus was likely to lie further away from the top of the long arm than previously thought. This was confirmed by FISH, which was applied to tomato pachytene chromosomes in order to gain an insight into the organisation of hetero- and euchromatin and its relationship to the physical and genetic distances in the Cnr region. Three molecular markers linked to Cnr were unambiguously located by FISH to the long arm of chromosome 2 using individual BAC probes containing these single-copy sequences. The physical order of the markers coincided with that established by genetic analysis. The two AFLP markers most-closely linked to the Cnr locus were located in the euchromatic region 2.7-cM apart. The physical distance between these markers was measured on the pachytene spreads and estimated to be approximately 900 kb, suggesting a bp:cM relationship in this region of chromosome 2 of about 330 kb/cM. This is less than half the average value of 750 kb/cM for the tomato genome. The relationship between genetic and physical distances on chromosome 2 is discussed. Received: 11 January 2001 / Accepted: 30 April 2001     

Genetic and physical mapping of the lateral suppressor (ls) locus in tomato

Tomato plants homozygous for the recessive lateral suppressor (ls) mutation show a number of phenotypic abnormalities among which the lack of lateral meristem initiation during vegetative growth and the absence of petals on the flower are the most prominent. As a first step towards the isolation of the Ls gene by means of map-based cloning, we have determined its position on the restriction fragment length polymorphism (RFLP) map of tomato. RFLP analysis of 527 F2 plants segregating for the ls allele allowed us to define an interval of 0.8 cM in which the Ls gene is located. Analysis of the physical distance between the two flanking RFLP markers by pulsed field gel electrophoresis revealed that they lie no further than 375 kb apart. Knowledge of the physical distance together with the availability of a tomato yeast artificial chromosome (YAC) library, makes it feasible to isolate the Ls gene by a map-based cloning approach.     

Molecular genetic analysis of theripening-inhibitor andnon-ripening loci of tomato: A first step in genetic map-based cloning of fruit ripening genes

Ripening represents a complex developmental process unique to plants. We are using tomato fruit ripening mutants as tools to understand the regulatory components that control and coordinate the physiological and biochemical changes which collectively confer the ripe phenotype. We have genetically characterized two loci which result in significant inhibition of the ripening process in tomato,ripening-inhibitor (rin), andnon-ripening (nor), as a first step toward isolating genes likely to encode key regulators of this developmental process. A combination of pooled-sample mapping as well as classical restriction fragment length polymorphism (RFLP) analysis has permitted the construction of high-density genetic maps for the regions of chromosomes 5 and 10 spanning therin andnor loci, respectively. To assess the feasibility of initiating a chromosome walk, physical mapping of high molecular weight genomic DNA has been employed to estimate the relationship between physical distance (in kb) and genetic distance (in cM) around the targeted loci. Based on this analysis, the relationship in the region spanning therin locus is estimated to be 200–300 kb/cM, while thenor locus region ratio is approximately 200 kb/1 cM. Using RFLP markers tightly linked torin andnor, chromosome walks have been initiated to both loci in a yeast artificial chromosome (YAC) library of tomato genomic DNA. We have isolated and characterized several YAC clones linked to each of the targeted ripening loci and present genetic evidence that at least one YAC clone contains thenot locus.     

Chromosome walking with YAC clones in Arabidopsis: isolation of 1700 kb of contiguous DNA on chromosome 5, including a 300 kb region containing the flowering-time gene CO

The co mutation of Arabidopsis thaliana causes a late-flowering phenotype that is insensitive to day-ength. The mutation was mapped previously to the upper arm of chromosome 5, approximately 1.6 cM from the chalcone synthase gene (CHS). We were provided with five yeast artificial chromosome (YAC) libraries and used these to perform a chromosome walk from CHS to the CO gene. In this paper we report the isolation of 1700 kb of contiguous Arabidopsis DNA, which represents approximately 1%–2% of the genome, inserted in YACs. This required the detailed analysis of 67 YACs, from which 87 end probes were isolated and examined in hybridisation experiments. This analysis showed that approximately 40% of the YACs presented problems in chromosome walking experiments because they contained repetitive sequence at one of their termini, were chimaeric or because part of the plant DNA was deleted. DNA fragments isolated from YACs were used as restriction fragment length polymorphism (RFLP) markers to localize CO to a 300 kb region within the cloned DNA. We compare the physical distance between CHS and CO with the genetic distance and find that in this region 1 cM is equivalent to approximately 200 kb.     

RFLP linkage analysis of the Cf-4 and Cf-9 genes for resistance toCladosporium fulvum in tomato

Four different populations segregating for one of the two closely linked (possibly allelic) tomato disease resistance genes to the fungusCladosporium fulvum,Cf-4 andCf-9, were generated and analysed for recombination frequencies between theCf-genes and restriction fragment length polymorphism (RFLP) loci. The population consisting of F₂ progeny from the interspecific crossLycopersicon esculentum carryingCf-9 ×L. pennellii was identified as the most useful for RFLP mapping of theCf-4/9 locus and an RFLP map around this locus was constructed mainly using this population. The two closest markers identified were CP46, 2.6 cM distal, and a group of 11 markers including TG236, 3.7 cM proximal toCf-4/9. A polymerase chain reaction (PCR)-based procedure for the rapid identification of recombination events between these two markers was developed. The regions of foreign DNA introgression surroundingCf-4 andCf-9 in near-isogenic lines were delimited.     

Identification of a YAC clone carrying the Xa-1 allele, a bacterial blight resistance gene in rice

Map-based cloning methods have been applied for isolation of Xa-1, one of the bacterial blight resistance genes in rice.Xa-1 was previously mapped on chromosome 4 using molecular markers. For positional cloning of Xa-1, a high-resolution genetic map was made for theXa-1 region using an F₂ population of 402 plants and additional molecular markers. Three restriction fragment length polymorphism (RFLP) markers, XNpb235, XNpb264 and C600 were found to be linked tightly to Xa-1, with no recombinants, and U08 ₇₅₀ was mapped 1.5 cM from Xa-1. The screening of a yeast artificial chromosome (YAC) library using theseXa-1-linked RFLP markers resulted in the identification of ten contiguous YAC clones. Among these, one YAC clone, designated Y5212, with an insert of 340 kb, hybridized with all three tightly linked markers. This YAC was confirmed to possess the Xa-1 allele by mapping the Xa-1 gene between both end clones of this YAC (Y5212R and Y5212L).     

Map-based cloning in crop plants. Tomato as a model system: I. Genetic and physical mapping of jointless

A map-based cloning scheme is being used to isolate the jointless (j) gene of tomato. The jointless locus is defined by a single recessive mutation that completely suppresses the formation of the fruit and flower pedicel and peduncle abscission zone. jointless was mapped in an F₂ population of an interspecific cross between Lycopersicon esculentum and Lycopersicon pennellii to a 7.1 cM interval between two restriction fragment length polymorphism (RFLP) markers TG523 and TG194. Isogenic DNA pools were then constructed from a subset of the mapping population and screened with 800 random decamers for random amplification of polymorphic DNA (RAPD) polymorphisms. Five new RAPD markers were isolated and mapped to chromosome 11, two of which were mapped within the targeted interval. One marker, RPD158, was mapped 1.5 cM to the opposite side of jointless relative to TG523 and thus narrowed the interval between the closest flanking markers to 3.0 cM. Physical mapping by pulse-field gel electrophoresis using TG523 and RPD158 as probes demonstrated that both markers hybridize to a common 600 kb SmaI restriction fragment. This provided an estimate of 200 kb/cM for the relationship between physical and genetic distances in the region of chromosome 11 containing the j locus. The combined results provide evidence for the feasibility of the next step toward isolation of the jointless gene by map-based cloning — a chromosome walk or jump to jointless.     

Genetic analysis and gene mapping of a rice few-tillering mutant in early backcross populations ( Oryza sativa L.)

A rice mutant,G069, characteristic of few tiller numbers, was found in anther culture progeny from theF ₁ hybrid between anindica-japonica cross, Gui630×02428. The mutant has another two major features: delayed tillering development and yellowing apex and margin on the mature leaves. As a donor parent,G069 was further backcrossed with the recurrent parent,02428, for two turns to develop aBC ₂F₂ population. Genetic analysis in theBC ₂F₂ population showed that the traits of few-tillering and yellowing apex and margin on the mature leaves were controlled by one recessive gene. A pool of equally mixed genomic DNA, from few-tillering individual plants inBC ₂F₂, was constructed to screen polymorphism with simple sequence repeat (SSR) markers in comparison with the02428 genome. One SSR marker and three restriction fragment length polymorphism (RFLP) markers were found possibly linked with the recessive gene. By using these markers, the gene of few-tillering was mapped on chromosome 2 between RFLP marker C424 and S13984 with a genetic distance of 2.4 cM and 0.6 cM, respectively. The gene is designatedft1.     

Marker enrichment and high-resolution map of the segment of potato chromosome VII harbouring the nematode resistance gene Gro1

The dominant allele Gro1 confers on potato resistance to the root cyst nematode Globodera rostochiensis. The Gro1 locus has been mapped to chromosome VII on the genetic map of potato, using RFLP markers. This makes possible the cloning of Gro1 based on its map position. As part of this strategy we have constructed a high-resolution genetic map of the chromosome segment surrounding Gro1, based on RFLP, RAPD and AFLP markers. RAPD and RFLP markers closely linked to Gro1 were selected by bulked segregant analysis and mapped relative to the Gro1 locus in a segregating population of 1105 plants. Three RFLP and one RAPD marker were found to be inseparable from the Gro1 locus. Two AFLP markers were identified that flanked Gro1 at genetic distances of 0.6 cM and 0.8 cM, respectively. A genetic distance of 1 cM in the Gro1 region corresponds to a physical distance of ca. 100 kb as estimated by long-range restriction analysis. Marker-assisted selection for nematode resistance was accomplished in the course of constructing the high-resolution map. Plants carrying the resistance allele Gro1 could be distinguished from susceptible plants by marker assays based on the polymerase chain reaction (PCR).     

Chromosomal localization and molecular-marker tagging of the powdery mildew resistance gene (Lv) in tomato

We report the tagging of a powdery mildew [Leveillula taurica (Lév.) Arnaud.] resistance gene (Lv) in tomato using RAPD and RFLP markers. DNA from a resistant (cv Laurica) and a susceptible cultivar were screened with 300 random primers that were used to amplify DNA of resistant and susceptible plants. Four primers yielded fragments that were unique to the resistant line and linked to the resistance gene in an F₂ population. One of these amplified fragments, OP248, with a molecular weight of 0.7 kb, was subsequently mapped to chromosome 12, 1 cM away from CT134. Using RFLP markers located on chromosome 12, it was shown that approximately one half of chromosome 12 (about 42 cM), in the resistant variety is comprised of foreign DNA, presumably introgressed with the resistance gene from the wild species L. chilense. Further analysis of a backcross population revealed that the Lv gene lies in the 5.5-cM interval between RFLP markers, CT211 and CT219. As a prelude to map-based cloning of the Lv gene, we are currently enriching the density of markers in this region by a combination of RAPD primers and other techniques.     

Linkages between restriction fragment length,isozyme, and morphological markers in lentil

Summary A genetic linkage map of lentil comprising 333 centimorgans (cM) was constructed from 20 restriction fragment length, 8 isozyme, and 6 morphological markers segregating in a single interspecific cross (Lens culinaris × L. orientalis). Because the genotypes at marker loci were determined for about 66 F₂ plants, linkages are only reported for estimates of recombination less than 30 cM. Probes for identification of restriction fragment length polymorphisms (RFLPs) were isolated from a cDNA and EcoRI and PstI partial genomic libraries of lentil. The cDNA library gave the highest frequency of relatively low-copy-number probes. The cDNAs were about twice as efficient, relative to random genomic fragments, in RFLP detection per probe. Nine markers showed significant deviations from the expected F₂ ratios and tended to show a predominance of alleles from the cultigen. Assuming a genome size of 10 Morgans, 50% of the lentil genome could be linked within 10 cM of the 34 markers and the map is of sufficient size to attempt mapping of quantitative trait loci.     

Structure and organization of the B genome based on a linkage map in Brassica nigra

We constructed a genetic map on Brassica nigra based on a segregating population of 83 F₂ individuals. Three different types of molecular markers were used to build the map including isozymes, restriction fragment length polymorphisms (RFLP), and random amplified polymorphic DNA (RAPD). The final map contained 124 markers distributed in 11 linkage groups. The map covered a total distance of 677 cM with the markers distributed within a mean distance of 5.5cM. Of the sequences found in the B. nigra map, 40% were duplicated and organized into three different types of arrangements. They were either scattered throughout the genome, organized in tandem, or organized in blocks of duplicated loci conserved in more than 1 linkage group.     

Molecular mapping of the py-1 gene for resistance to corky root rot (Pyrenochaeta lycopersici) in tomato

 We report the molecular mapping of the py-1 gene for resistance to corky root rot [Pyrenochaeta lycopersici (Schneider and Gerlach)] in tomato using RAPD and RFLP marker analysis. DNA from near-isogenic lines (NILs) of tomato differing in corky root rot resistance was screened with 575 random oligonucleotide primers to detect polymorphic DNAs linked to py-1. Three primers (OPW-04, OPC-02, OPG-19) revealed polymorphisms between the NILs. Twelve resistant and eight susceptible DNA pools derived from segregating F₃ families were used to confirm that the RAPD markers were linked to the py-1 gene. Two of the linked amplified fragments, corresponding to OPW-04 and OPC-02, were subsequently cloned and mapped on the tomato molecular linkage map as RFLPs. These clones were located between TG40 and CT31 on the short arm of chromosome 3. Further analysis with selected RFLP markers showed that 7% (8.8 cM) of chromosome 3 of the resistant line ‘Moboglan’ was introgressed from the L. peruvianum donor parent. Three RFLP markers (TG40, TG324, and TG479) from the introgressed part of chromosome 3 were converted to cleaved amplified polymorphism (CAP) markers for use in a polymerase chain reaction (PCR) assay. These PCR markers will allow rapid large-scale screening of tomato populations for corky root rot resistance. Received: 2 January 1998 / Accepted: 12 January 1998     

Molecular genetic analysis of theripening-inhibitor andnon-ripening loci of tomato: A first step in genetic map-based cloning of fruit ripening genes

Ripening represents a complex developmental process unique to plants. We are using tomato fruit ripening mutants as tools to understand the regulatory components that control and coordinate the physiological and biochemical changes which collectively confer the ripe phenotype. We have genetically characterized two loci which result in significant inhibition of the ripening process in tomato,ripening-inhibitor (rin), andnon-ripening (nor), as a first step toward isolating genes likely to encode key regulators of this developmental process. A combination of pooled-sample mapping as well as classical restriction fragment length polymorphism (RFLP) analysis has permitted the construction of high-density genetic maps for the regions of chromosomes 5 and 10 spanning therin andnor loci, respectively. To assess the feasibility of initiating a chromosome walk, physical mapping of high molecular weight genomic DNA has been employed to estimate the relationship between physical distance (in kb) and genetic distance (in cM) around the targeted loci. Based on this analysis, the relationship in the region spanning therin locus is estimated to be 200–300 kb/cM, while thenor locus region ratio is approximately 200 kb/1 cM. Using RFLP markers tightly linked torin andnor, chromosome walks have been initiated to both loci in a yeast artificial chromosome (YAC) library of tomato genomic DNA. We have isolated and characterized several YAC clones linked to each of the targeted ripening loci and present genetic evidence that at least one YAC clone contains thenot locus.     

Genetic analysis and gene mapping of a rice few-tillering mutant in early backcross populations ( Oryza sativa L.)

A rice mutant,G069, characteristic of few tiller numbers, was found in anther culture progeny from theF ₁ hybrid between anindica-japonica cross, Gui630×02428. The mutant has another two major features: delayed tillering development and yellowing apex and margin on the mature leaves. As a donor parent,G069 was further backcrossed with the recurrent parent,02428, for two turns to develop aBC ₂F₂ population. Genetic analysis in theBC ₂F₂ population showed that the traits of few-tillering and yellowing apex and margin on the mature leaves were controlled by one recessive gene. A pool of equally mixed genomic DNA, from few-tillering individual plants inBC ₂F₂, was constructed to screen polymorphism with simple sequence repeat (SSR) markers in comparison with the02428 genome. One SSR marker and three restriction fragment length polymorphism (RFLP) markers were found possibly linked with the recessive gene. By using these markers, the gene of few-tillering was mapped on chromosome 2 between RFLP marker C424 and S13984 with a genetic distance of 2.4 cM and 0.6 cM, respectively. The gene is designatedft1.     

An approach to cloning of Pi-b rice blast resistance gene

A contig of clones from BAC rice genomic library encompassing blast resistance gene Pi-b was constructed. On an average eight clones (8 ± 2.6) were picked up by each marker, which was expected basing on the BAC library size (Nakamura et al. 1997). The 2.4 cM distance between flanking RFLP markers G 1234 and RZ 213 (Miyamoto et al. 1996) was spanned with 4 steps of contig including 25 clones. The physical distance of 370 kb between flanking markers corresponds to a small ratio of physical and genetical distances (155 kb/cM) due to a probable structure of the gene locus near the telomeric end of the chromosome. Markers cosegregating with blast resistance against Magnoporthe grisea were localized in a 2 kb restriction fragment. A new border marker was found on the telomeric side of the Pi-b gene, less than 10 kb from cosegregating markers. No clear marker for the centromeric side of the gene was found but the position of Pi-b rice blast resistant gene was narrowed to within at least 50 kb, which is to our knowledge the most precised estimation of the position of this gene.     

Characterization of the Aspergillus niger pelB gene: structure and regulation of expression

Summary Nearly isogenic lines (NILs) of rice (Oryza sativa) differing at a locus conferring resistance to the pathogen Xanthomonas oryzae pv. oryzae were surveyed with 123 DNA markers and 985 random primers using restriction fragment length plymorphism (RFLP) and random amplified polymorphic DNA (RAPD) analysis. One chromosome 11 marker (RG103) detected polymorphism between the NILs that cosegregated with Xa21. All other chromosome 11 DNA markers tested were monomorphic between the NILs, localizing the Xa21 introgressed region to an 8.3 cM interval on chromosome 11. Furthermore, we identified two polymerase chain reaction (PCR) products (RAPD2148 and RAPD818) that detected polymorphisms between the NILs. Genomic sequences hybridizing with RAPD818, RAPD248 and RG103 were duplicated specifically in the Xa21 NIL. All three markers cosegregated with the resistance locus, Xa21, in a F₂ population of 386 progeny. Based on the frequency with which we recovered polymorphic Xa21-linked markers, we estimated the physical size of the introgressed region to be approximately 800 kb. This estimation was supported by physical mapping (using pulsed field gel electrophoresis) of the sequences hybridizing with the three Xa21-linked DNA markers. The results showed that the three Xa21-linked markers are physically close to each other, with one copy of the RAPD818 sequences located within 60 kb of RAPD248 and the other copy within 270 kb of RG103. None of the enzymes tested generated a DNA fragment that hybridized with all three of the markers indicating that the introgressed region containing the resistance locus Xa21 is probably larger than 270 kb.     

Genetic and physical mapping of the lateral suppressor (ls) locus in tomato

Tomato plants homozygous for the recessive lateral suppressor (ls) mutation show a number of phenotypic abnormalities among which the lack of lateral meristem initiation during vegetative growth and the absence of petals on the flower are the most prominent. As a first step towards the isolation of the Ls gene by means of map-based cloning, we have determined its position on the restriction fragment length polymorphism (RFLP) map of tomato. RFLP analysis of 527 F2 plants segregating for the ls allele allowed us to define an interval of 0.8 cM in which the Ls gene is located. Analysis of the physical distance between the two flanking RFLP markers by pulsed field gel electrophoresis revealed that they lie no further than 375 kb apart. Knowledge of the physical distance together with the availability of a tomato yeast artificial chromosome (YAC) library, makes it feasible to isolate the Ls gene by a map-based cloning approach.     

Chromosome landing at the tomato Bs4 locus

The tomato (Lycopersicon esculentum) Bs4 gene confers resistance to strains of Xanthomonas campestris pathovar vesicatoria that express the avirulence protein AvrBs4. As part of a map-based cloning strategy for the isolation of Bs4, we converted Bs4-linked amplified fragment length polymorphism (AFLP) and restriction fragment length polymorphism (RFLP) markers into locus-specific sequence-tagged-site (STS) markers. The use of these markers for the analysis of 1972 meiotic events allowed high-resolution genetic mapping within a 1.2-cM interval containing the target gene. Two tomato yeast artificial chromosome (YAC) clones, each harboring inserts of approximately 250 kb, were identified using the marker most closely linked to Bs4. YAC end-specific markers were established and employed to construct a local YAC contig. The ratio of physical to genetic distance at Bs4 was calculated to be 280 kb/cM, revealing that recombination rates in this region are about three times higher than the genome-wide average. Mapping of YAC end-derived markers demonstrated that the Bs4 locus maps within a region of 250 kb, corresponding to a genetic interval of 0.9 cM.