Virus-specific interaction between the human cytomegalovirus major capsid protein and the C terminus of the assembly protein precursor.

We previously identified a minimal 12-amino-acid domain in the C terminus of the herpes simplex virus type 1 (HSV-1) scaffolding protein which is required for interaction with the HSV-1 major capsid protein. An alpha-helical structure which maximizes the hydropathicity of the minimal domain is required for the interaction. To address whether cytomegalovirus (CMV) utilizes the same strategy for capsid assembly, several glutathione S-transferase fusion proteins to the C terminus of the CMV assembly protein precursor were produced and purified from bacterial cells. The study showed that the glutathione S-transferase fusion containing 16 amino acids near the C-terminal end was sufficient to interact with the major capsid protein. Interestingly, no cross-interaction between HSV-1 and CMV could be detected. Mutation analysis revealed that a three-amino-acid region at the N-terminal side of the central Phe residue of the CMV interaction domain played a role in determining the viral specificity of the interaction. When this region was converted so as to correspond to that of HSV-1, the CMV assembly protein domain lost its ability to interact with the CMV major capsid protein but gained full interaction with the HSV-1 major capsid protein. To address whether the minimal interaction domain of the CMV assembly protein forms an alpha-helical structure similar to that in HSV-1, peptide competition experiments were carried out. The results showed that a cyclic peptide derived from the interaction domain with a constrained (alpha-helical structure competed for interaction with the major capsid protein much more efficiently than the unconstrained linear peptide. In contrast, a cyclic peptide containing an Ala substitution for the critical Phe residue did not compete for the interaction at all. The results of this study suggest that (i) CMV may have developed a strategy similar to that of HSV-1 for capsid assembly; (ii) the minimal interaction motif in the CMV assembly protein requires an alpha-helix for efficient interaction with the major capsid protein; and (iii) the Phe residue in the CMV minimal interaction domain is critical for interaction with the major capsid protein.     

Mammalian SCAN domain dimer is a domain-swapped homolog of the HIV capsid C-terminal domain

Retroviral assembly is driven by multiple interactions mediated by the Gag polyprotein, the main structural component of the forming viral shell. Critical determinants of Gag oligomerization are contained within the C-terminal domain (CTD) of the capsid protein, which also harbors a conserved sequence motif, the major homology region (MHR), in the otherwise highly variable Gag. An unexpected clue about the MHR function in retroviral assembly emerges from the structure of the zinc finger-associated SCAN domain we describe here. The SCAN dimer adopts a fold almost identical to that of the retroviral capsid CTD but uses an entirely different dimerization interface caused by swapping the MHR-like element between the monomers. Mutations in retroviral capsid proteins and functional data suggest that a SCAN-like MHR-swapped CTD dimer forms during immature particle assembly. In the SCAN-like dimer, the MHR contributes the major part of the large intertwined dimer interface explaining its functional significance.     

Alphavirus nucleocapsid protein contains a putative coiled coil alpha-helix important for core assembly

The alphavirus nucleocapsid core is formed through the energetic contributions of multiple noncovalent interactions mediated by the capsid protein. This protein consists of a poorly conserved N-terminal region of unknown function and a C-terminal conserved autoprotease domain with a major role in virion formation. In this study, an 18-amino-acid conserved region, predicted to fold into an alpha-helix (helix I) and embedded in a low-complexity sequence enriched with basic and Pro residues, has been identified in the N-terminal region of the alphavirus capsid proteins. In Sindbis virus, helix I spans residues 38 to 55 and contains three conserved leucine residues, L38, L45, and L52, conforming to the heptad amino acid organization evident in leucine zipper proteins. Helix I consists of an N-terminally truncated heptad and two complete heptad repeats with beta-branched residues and conserved leucine residues occupying the a and d positions of the helix, respectively. Complete or partial deletion of helix I, or single-site substitutions at the conserved leucine residues (L45 and L52), caused a significant decrease in virus replication. The mutant viruses were more sensitive to elevated temperature than wild-type virus. These mutant viruses also failed to accumulate cores in the cytoplasm of infected cells, although they did not have defects in protein translation or processing. Analysis of these mutants using an in vitro assembly system indicated that the majority were defective in core particle assembly. Furthermore, mutant proteins showed a trans-dominant negative phenotype in in vitro assembly reactions involving mutant and wild-type proteins. We propose that helix I plays a central role in the assembly of nucleocapsid cores through coiled coil interactions. These interactions may stabilize subviral intermediates formed through the interactions of the C-terminal domain of the capsid protein and the genomic RNA and contribute to the stability of the virion.     

Total chemical synthesis of dengue 2 virus capsid protein via native chemical ligation: Role of the conserved salt-bridge

The dengue capsid protein C is a highly basic alpha-helical protein of ～100 amino acid residues that forms an emphipathic homodimer to encapsidate the viral genome and to interact with viral membranes. The solution structure of dengue 2 capsid protein C (DEN2C) has been determined by NMR spectroscopy, revealing a large dimer interface formed almost exclusively by hydrophobic residues. The only acidic residue (Glu87) conserved in the capsid proteins of all four serotypes of dengue virus forms a salt bridge with the side chains of Lys45 and Arg55′. To understand the structural and functional significance of this conserved salt bridge, we chemically synthesized an N-terminally truncated form of DEN2C (^WTDEN2C) and its salt bridge-void analog ^E87ADEN2C using the native chemical ligation technique developed by Kent and colleagues. Comparative biochemical and biophysical studies of these two synthetic proteins using circular dichroism spectroscopy, fluorescence polarization, protein thermal denaturation, and proteolytic susceptibility assay demonstrated that the conserved salt bridge contributed to DEN2C dimerization and stability as well as its resistance to proteolytic degradation. Our work provided insight into the role of a fully conserved structural element of the dengue capsid protein C and paved the way for additional functional studies of this important viral protein.     

Structural analysis of the N-terminal domain of the human T-cell leukemia virus capsid protein

The N-terminal domain of the retroviral capsid (CA) protein is one of the least conserved regions encoded in the genome. Surprisingly, the three-dimensional structures of the CA from different genera exhibit alpha-helical structural features that are highly conserved. The N-terminal residues of the human immunodeficiency virus type 1 (HIV-1) and Rous sarcoma virus (RSV) capsid proteins form a beta-hairpin. To determine if this feature is conserved in the retroviral family, we cloned, expressed, purified, and solved the structure of a N-terminal 134 amino acid fragment (CA(134)) from the human T-cell leukemia virus type 1 (HTLV-I) using high resolution nuclear magnetic resonance (NMR) spectroscopy. The CA(134) fragment contains an N-terminal beta-hairpin and a central coiled-coil-like structure composed of six alpha-helices. The N-terminal Pro1 residue contacts Asp54 in the helical cluster through a salt bridge. Thus, the beta-hairpin is conserved and the helical cluster is structurally similar to other retroviral CA domains. However, although the same Asp residue defines the orientation of the hairpin in both the HTLV-1 and HIV-1 CA proteins, the HTLV-I hairpin is oriented away, rather than towards, the helical core. Significant differences were also detected in the spatial orientation and helical content of the long centrally located loop connecting the helices in the core. It has been proposed that the salt bridge allows the formation of a CA-CA interface that is important for the assembly of the conical cores that are characteristic of HIV-1. As HTLV-I forms spherical cores, the salt-bridge feature is apparently not conserved for this function although its role in determining the orientation of the beta-hairpin may be critical, along with the central loop. Comparison of three-dimensional structures is expected to elucidate the relationships between the retroviral capsid protein structure and its function.     

Biophysical Analysis of the MHR Motif in Folding and Domain Swapping of the HIV Capsid Protein C-Terminal Domain

Infection by human immunodeficiency virus (HIV) depends on the function, in virion morphogenesis and other stages of the viral cycle, of a highly conserved structural element, the major homology region (MHR), within the carboxyterminal domain (CTD) of the capsid protein. In a modified CTD dimer, MHR is swapped between monomers. While no evidence for MHR swapping has been provided by structural models of retroviral capsids, it is unknown whether it may occur transiently along the virus assembly pathway. Whatever the case, the MHR-swapped dimer does provide a novel target for the development of anti-HIV drugs based on the concept of trapping a nonnative capsid protein conformation. We have carried out a thermodynamic and kinetic characterization of the domain-swapped CTD dimer in solution. The analysis includes a dissection of the role of conserved MHR residues and other amino acids at the dimerization interface in CTD folding, stability, and dimerization by domain swapping. The results revealed some energetic hotspots at the domain-swapped interface. In addition, many MHR residues that are not in the protein hydrophobic core were nevertheless found to be critical for folding and stability of the CTD monomer, which may dramatically slow down the swapping reaction. Conservation of MHR residues in retroviruses did not correlate with their contribution to domain swapping, but it did correlate with their importance for stable CTD folding. Because folding is required for capsid protein function, this remarkable MHR-mediated conformational stabilization of CTD may help to explain the functional roles of MHR not only during immature capsid assembly but in other processes associated with retrovirus infection. This energetic dissection of the dimerization interface in MHR-swapped CTD may also facilitate the design of anti-HIV compounds that inhibit capsid assembly by conformational trapping of swapped CTD dimers.     

Conformational stability of dimeric and monomeric forms of the C-terminal domain of human immunodeficiency virus-1 capsid protein

The unfolding equilibrium of the C-terminal domain of human immunodeficiency virus-1 (HIV-1) capsid protein has been analyzed by circular dichroism and fluorescence spectroscopy. The results for the dimeric, natural domain are consistent with a three-state model (N(2)<-->2I<-->2U). The dimer (N(2)) dissociates and partially unfolds in a coupled cooperative process, into a monomeric intermediate (I) of very low conformational stability. This intermediate, which is the only significantly populated form at low (1 microM) protein concentrations, fully preserves the secondary structure but has lost part of the tertiary (intramonomer) interactions found in the dimer. In a second transition, the intermediate cooperatively unfolds into denatured monomer (U). The latter process is the equivalent of a two-state unfolding transition observed for a monomeric domain in which Trp184 at the dimer interface had been truncated to Ala. A highly conserved, disulfide-bonded cysteine, but not the disulfide bond itself, and three conserved residues within the major homology region of the retroviral capsid are important for the conformational stability of the monomer. All these residues are involved also in the association process, despite being located far away from the dimerization interface. It is proposed that dimerization of the C-terminal domain of the HIV-1 capsid protein involves induced-fit recognition, and the conformational reorganization also improves substantially the low intrinsic stability of each monomeric half.     

Capsid structure of Kaposi's sarcoma-associated herpesvirus, a gammaherpesvirus, compared to those of an alphaherpesvirus, herpes simplex virus type 1, and a betaherpesvirus, cytomegalovirus

The capsid of Kaposi's sarcoma-associated herpesvirus (KSHV) was visualized at 24-A resolution by cryoelectron microscopy. Despite limited sequence similarity between corresponding capsid proteins, KSHV has the same T=16 triangulation number and much the same capsid architecture as herpes simplex virus (HSV) and cytomegalovirus (CMV). Its capsomers are hexamers and pentamers of the major capsid protein, forming a shell with a flat, close-packed, inner surface (the "floor") and chimney-like external protrusions. Overlying the floor at trigonal positions are (alpha beta(2)) heterotrimers called triplexes. The floor structure is well conserved over all three viruses, and the most variable capsid features reside on the outer surface, i.e., in the shapes of the protrusions and triplexes, in which KSHV resembles CMV and differs from HSV. Major capsid protein sequences from the three subfamilies have some similarity, which is closer between KSHV and CMV than between either virus and HSV. The triplex proteins are less highly conserved, but sequence analysis identifies relatively conserved tracts. In alphaherpesviruses, the alpha-subunit (VP19c in HSV) has a 100-residue N-terminal extension and an insertion near the C terminus. The small basic capsid protein sequences are highly divergent: whereas the HSV and CMV proteins bind only to hexons, difference mapping suggests that the KSHV protein, ORF65, binds around the tips of both hexons and pentons.     

Crystal structure of the carbohydrate recognition domain of the H1 subunit of the asialoglycoprotein receptor

The human asialoglycoprotein receptor (ASGPR), also called hepatic lectin, is an integral membrane protein and is responsible for the clearance of desialylated, galactose-terminal glycoproteins from the circulation by receptor-mediated endocytosis. It can be subdivided into four functional domains: the cytosolic domain, the transmembrane domain, the stalk and the carbohydrate recognition domain (CRD). The galactose-binding domains belong to the superfamily of C-type (calcium-dependent) lectins, in particular to the long-form subfamily with three conserved intramolecular disulphide bonds. It is able to bind terminal non-reducing galactose residues and N-acetyl-galactosamine residues of desialated tri or tetra-antennary N-linked glycans. The ASGPR is a potential liver-specific receptor for hepatitis B virus and Marburg virus and has been used to target exogenous molecules specifically to hepatocytes for diagnostic and therapeutic purposes.Here, we present the X-ray crystal structure of the carbohydrate recognition domain of the major subunit H1 at 2.3 A resolution. While the overall fold of this and other known C-type lectin structures are well conserved, the positions of the bound calcium ions are not, indicating that the fold is stabilised by alternative mechanisms in different branches of the C-type lectin family. It is the first CRD structure where three calcium ions form an intergral part of the structure. In addition, the structure provides direct confirmation for the conversion of the ligand-binding site of the mannose-binding protein to an asialoglycoprotein receptor-like specificity suggested by Drickamer and colleagues. In agreement with the prediction that the coiled-coil domain of the ASGPR is separated from the CRD and its N-terminal disulphide bridge by several residues, these residues are indeed not alpha-helical, while in tetranectin they form an alpha-helical coiled-coil.     

The C-terminal tetrapeptide HWFW of the Chlorella HUP1 hexose/H(+)-symporter is essential for full activity and an alpha-helical structure of the C-terminus

C-terminal tails of plant hexose/H(+)-symporters of the major facilitator superfamily contain a highly conserved motif of four amino acids: HWFW. A deletion of these four amino acids in the Chlorella HUP1 protein leads to a decrease in transport activity by a factor of 3-4. The mutated tail is highly sensitive to trypsin; it does not show alpha-helical conformation in contrast to the wild type C-terminal peptide with an alpha-helical content of at least 15%. The production of monoclonal antibody 416B8 recognizing an epitope within the central loop of HUP1 protein has been a prerequisite for the experiments described.     

NMR assignments for the insertion domain of bacteriophage Sf6 coat protein

The P22 bacteriophage group is a subgroup of the λ phage supercluster, comprised of the three major sequence types Sf6, P22, and CUS-3, based on their capsid proteins. Our goal is to investigate the extent to which structure–function relationships are conserved for the viral coat proteins and I-domains in this subgroup. Sf6 is a phage that infects the human pathogen Shigella flexneri. The coat protein of Sf6 assembles into a procapsid, which further undergoes maturation during DNA packaging into an infectious virion. The Sf6 coat protein contains a genetically inserted domain, termed the I-domain, similar to the ones present in the P22 and CUS-3 coat proteins. Based on the P22 example, I-domains play important functional roles in capsid assembly, stability, viability, and size-determination. Here we report the ¹H, ¹⁵N, and ¹³C chemical shift assignments for the I-domain of the Sf6 phage coat protein. Chemical shift-based secondary structure prediction and hydrogen-bond patterns from a long-range HNCO experiment indicate that the Sf6 I-domain adopts a 6-stranded β-barrel fold like those of P22 and CUS-3 but with important differences, including the absence of the D-loop that is critical for capsid assembly and the addition of a novel disordered loop region.     

The crystal structure of the periplasmic domain of the Escherichia coli membrane protein insertase YidC contains a substrate binding cleft

In bacteria the biogenesis of inner membrane proteins requires targeting and insertion factors such as the signal recognition particle and the Sec translocon. YidC is an essential membrane protein involved in the insertion of inner membrane proteins together with the Sec translocon, but also as a separate entity. YidC of Escherichia coli is a member of the conserved YidC (in bacteria)/Oxa1 (in mitochondria)/Alb3 (in chloroplasts) protein family and contains six transmembrane segments and a large periplasmic domain (P1). We determined the crystal structure of the periplasmic domain of YidC from E. coli (P1D) at 1.8 A resolution. The structure of P1D shows the conserved beta-supersandwich fold of carbohydrate-binding proteins and an alpha-helical linker region at the C terminus that packs against the beta-supersandwich by a highly conserved interface. P1D exhibits an elongated cleft of similar architecture as found in the structural homologs. However, the electrostatic properties and molecular details of the cleft make it unlikely to interact with carbohydrate substrates. The cleft in P1D is occupied by a polyethylene glycol molecule suggesting an elongated peptide or acyl chain as a natural ligand. The region of P1D previously reported to interact with SecF maps to a surface area in the vicinity of the cleft. The conserved C-terminal region of the P1 domain was reported to be essential for the membrane insertase function of YidC. The analysis of this region suggests a role in membrane interaction and/or in the regulation of YidC interaction with binding partners.     

Crystal structure of nucleoporin Nic96 reveals a novel, intricate helical domain architecture

The nuclear pore complex (NPC) is an elaborate protein machine that mediates macromolecular transport across the nuclear envelope in all eukaryotes. The NPC is formed by nucleoporins that assemble in multiple copies around an 8-fold symmetry axis. Homology modeling suggests that most architectural nucleoporins are composed of simple beta-propeller and alpha-helical repeat domains. Here we present the crystal structure of Nic96, the Nup93 homolog in Saccharomyces cerevisiae, one of the major components of the NPC. This is the first structure of an alpha-helical nucleoporin domain. The protein folds into an elongated, mostly alpha-helical structure. Characteristically, non-canonical architectural features define the Nic96 structure. Sequence conservation among Nup93 homologs across all eukaryotes strongly suggests that the distinct topology is evolutionarily well maintained. We propose that the unique Nic96/Nup93 fold has a conserved function in all eukaryotes.     

Protein structure in the truncated (2/2) hemoglobin family

The discovery of protein sequences belonging to the widespread 'truncated hemoglobin' family has been followed in the last few years by extensive analyses of their three-dimensional structures. Truncated hemoglobins can be classified in three main groups, in light of their overall structural properties. The three groups adopt a 2-on-2 alpha-helical sandwich fold, based on four main alpha-helices of the classical 3-on-3 alpha-helical sandwich found in vertebrate and invertebrate globins. Each of the three groups displays sequence and structure specific features. Among these, a protein matrix tunnel system is typical of group I, a Trp residue at the G8 topological site is conserved in groups II and III, and residue TyrB10 is almost invariant in the three groups. Despite sequence variability in the heme distal site region, a strongly intertwined, but varied, network of hydrogen bonds stabilizes the heme ligand in the three protein groups. Fine mechanisms of ligand recognition and stabilization may vary based on group-specific distal site residues and on differing ligand diffusion pathways to the heme. Taken together, the structural considerations here presented underline that 'truncated hemoglobins' result from careful editing of the 3-on-3 alpha-helical globin sandwich fold, rather than from simple 'truncation' events. Thus, '2/2Hb' appears the most proper term to concisely address this protein family.     

Organization of regions with amphiphilic alpha-helical potential within the three-dimensional structure of beta-sheet proteins.

The observation that strong amphiphilic alpha-helical potential exists in all proteins, including beta-sheet proteins, has given rise to the idea that alpha-helical intermediates may be critical to the folding paths of all proteins. Here we report that regions with amphiphilic alpha-helical potential in beta-sheet proteins are regularly spaced within the native structure of the proteins at an average interval of about 13 A. This regular spacing did not occur when the location of amphiphilic regions was randomly assigned (p = 0.0056), suggesting some degree of organization with respect to the native fold. However, in the native structure of various non-homologous proteins that contain the same fold, the location of the regions with amphiphilic alpha-helical potential was not conserved. Further, there was no apparent association of amphiphilic alpha-helical potential with any particular type of secondary structure, confirming that this potential is not involved in maintenance of native structure and suggesting that it may be associated with a highly adaptable process.     

Crystal structure of the PP2A phosphatase activator: implications for its PP2A-specific PPIase activity

PTPA, an essential and specific activator of protein phosphatase 2A (PP2A), functions as a peptidyl prolyl isomerase (PPIase). We present here the crystal structures of human PTPA and of the two yeast orthologs (Ypa1 and Ypa2), revealing an all alpha-helical protein fold that is radically different from other PPIases. The protein is organized into two domains separated by a groove lined by highly conserved residues. To understand the molecular mechanism of PTPA activity, Ypa1 was cocrystallized with a proline-containing PPIase peptide substrate. In the complex, the peptide binds at the interface of a peptide-induced dimer interface. Conserved residues of the interdomain groove contribute to the peptide binding site and dimer interface. Structure-guided mutational studies showed that in vivo PTPA activity is influenced by mutations on the surface of the peptide binding pocket, the same mutations that also influenced the in vitro activation of PP2Ai and PPIase activity.     

The Complete Mitochondrial Genome of the Hagfish Myxine glutinosa: Unique Features of the Control Region

The complete sequence of the mitochondrial DNA of the hagfish Myxine glutinosa has been determined. The hagfish mtDNA (18,909 bp) is the longest vertebrate mtDNA determined so far. The gene arrangement conforms to the consensus vertebrate type and differs from that of lampreys. The exceptionally long (3628-bp) control region of the hagfish contains the typical conserved elements found in other vertebrate mtDNAs but is characterized by a large number of putative hairpins, which can potentially fold into a highly compact secondary structure that appears to be unique to hagfish. The comparison of the mtDNAs of two M. glutinosa specimens, excluding the control region, shows a 0.6% divergence at the nucleotide level as a sample of intraspecies polymorphism. Received: 21 August 2000 / Accepted: 2 March 2001     

Diversity of DIS, SD and psi hairpins in HIV-1 isolates of group M: in silico study

The primary sequence and secondary structure of the region encompassing DIS, SD and psi hairpins in HIV-1 genomic RNAs have been analyzed for 731 group M isolates from NCBI database. The secondary structures have been predicted by the m fold program (M. Zuker). Though the primary sequence of the region studied was found to be highly heterogeneous, this region is folded into DIS, SD and psi hairpins (DIS-, SD- and psi-like hairpins) in 96% of the isolates studied. The phylogenetic analysis showed that the most frequent variants of DIS hairpin (DIS(Lai), DIS(Mal) and DIS(C)) tolerate certain base changes. Particularly, base changes at stem position 23 occur 5 and 33 times more frequently in DIS(Lai) than in DIS(Mal) and DIS(C), respectively, while A insertion at the 5'end of apical loop is tolerated in DIS(Mal) and DIS(C) but not in DIS(Lai). We have revealed that the bottom base pair substitution G-C --> A-U in SD hairpin is highly specific for subtype D isolates. All variants of DIS, SD and psi hairpins found in our database are discussed, systematized and presented in schemes of hypothetical transitions between variants via a single base change. Most variants of DIS and psi hairpins were found to adopt several conformations.     

N-terminal Gag domain required for foamy virus particle assembly and export

Among the Retroviridae, foamy viruses (FVs) exhibit an unusual way of particle assembly and a highly specific incorporation of envelope protein into progeny virions. We have analyzed deletions and point mutants of the prototypic FV gag gene for capsid assembly and egress, envelope protein incorporation, infectivity, and ultrastructure. Deletions introduced at the 3' end of gag revealed the first 297 amino acids (aa) to be sufficient for specific Env incorporation and export of particulate material. Deletions introduced at the 5' end showed the region between aa 6 and 200 to be dispensable for virus capsid assembly but required for the incorporation of Env and particle egress. Point mutations were introduced in the 5' region of gag to target residues conserved among FVs from different species. Alanine substitutions of residues in a region between aa 40 and 60 resulted in severe alterations in particle morphology. Furthermore, at position 50, this region harbors the conserved arginine that is presumably at the center of a signal sequence directing FV Gag proteins to a cytoplasmic assembly site.     

C-terminal arginine cluster is essential for receptor binding of norovirus capsid protein

Noroviruses are the major viral pathogens of epidemic acute gastroenteritis affecting people worldwide. They have been found to recognize human histo-blood group antigens as receptors. The P domain of norovirus capsid protein was found to be responsible for binding to viral receptors, and the recombinant P protein forms P dimers and P particles in vitro. In this study, we demonstrate that a highly conserved arginine (R) cluster at the C terminus of the P domain is critical for receptor binding and P particle formation of the P proteins. Deletions of the R cluster abolished these functions. Replacement of the R cluster with histidines (another positively charged amino acid) resulted in low efficiency of receptor binding and P particle formation, while replacement with alanines led to loss of both functions completely. The R cluster also contains a highly conserved trypsin digestion site. A treatment of capsid protein or P domain mutants from both genogroup I (Norwalk virus) and genogroup II (VA387) noroviruses with trypsin resulted in a removal of the R cluster and the S domain, leaving a P polypeptide of 31.3 kDa (Norwalk virus) or 34.3 kDa (VA387), similar to the soluble P protein found in vivo. Our findings imply that the proteolytic process could be a necessary step for norovirus replication in the host.