Investigating the ultrastructure of fibrous long spacing collagen by parallel atomic force and transmission electron microscopy

The ultrastructure of fibrous long spacing (FLS) collagen fibrils has been investigated by performing both atomic force microscopy (AFM) and transmission electron microscopy (TEM) on exactly the same area of FLS collagen fibril samples. These FLS collagen fibrils were formed in vitro from type I collagen and alpha1-acid glycoprotein (AAG) solutions. On the basis of the correlated AFM and TEM images obtained before and after negative staining, the periodic dark bands observed in TEM images along the longitudinal axis of the FLS collagen fibril correspond directly to periodic protrusions seen by AFM. This observation is in agreement with the original surmise made by Gross, Highberger, and Schmitt (Gross J, Highberger JH, Schmitt FO, Proc Natl Acad Sci USA 1954;40:679-688) that the major repeating dark bands of FLS collagen fibrils observed under TEM are thick relative to the interband region. Although these results do not refute the idea of negative stain penetration into gap regions proposed by Hodge and Petruska (Petruska JA, Hodge AJ. Aspects of protein structure. Ramachandran GN, editor. New York: Academic Press; 1963. p. 289-300), there is no need to invoke the presence of gap regions to explain the periodic dark bands observed in TEM images of FLS collagen fibrils.     

Hierarchical assembly and the onset of banding in fibrous long spacing collagen revealed by atomic force microscopy.

The mechanism of formation of fibrillar collagen with a banding periodicity much greater than the 67 nm of native collagen, i.e. the so-called fibrous long spacing (FLS) collagen, has been speculated upon, but has not been previously studied experimentally from a detailed structural perspective. In vitro, such fibrils, with banding periodicity of approximately 270 nm, may be produced by dialysis of an acidic solution of type I collagen and alpha(1)-acid glycoprotein against deionized water. FLS collagen assembly was investigated by visualization of assembly intermediates that were formed during the course of dialysis using atomic force microscopy. Below pH 4, thin, curly nonbanded fibrils were formed. When the dialysis solution reached approximately pH 4, thin, filamentous structures that showed protrusions spaced at approximately 270 nm were seen. As the pH increased, these protofibrils appeared to associate loosely into larger fibrils with clear approximately 270 nm banding which increased in diameter and compactness, such that by approximately pH 4.6, mature FLS collagen fibrils begin to be observed with increasing frequency. These results suggest that there are aspects of a stepwise process in the formation of FLS collagen, and that the banding pattern arises quite early and very specifically in this process. It is proposed that typical 4D-period staggered microfibril subunits assemble laterally with minimal stagger between adjacent fibrils. alpha(1)-Acid glycoprotein presumably promotes this otherwise abnormal lateral assembly over native-type self-assembly. Cocoon-like fibrils, which are hundreds of nanometers in diameter and 10-20 microm in length, were found to coexist with mature FLS fibrils.     

Sequential assembly of collagen revealed by atomic force microscopy.

Most polymers which comprise biological filaments assemble by two mechanisms: nucleation and elongation or a sequential, stepwise process involving a hierarchy of intermediate species. We report the application of atomic force microscopy (AFM) to the study of the early events in the sequential or stepwise mode of assembly of a macromolecular filament. Collagen monomers were assembled in vitro and the early structural intermediates of the assembly process were examined by AFM and correlated with turbidimetric alterations in the assembly mixture. The assembly of collagen involved a sequence of distinctive filamentous species which increased in both diameter and length over the time course of assembly. The first discrete population of collagen oligomers were 1-2 nm in diameter (300-500 nm in length); at later time points, filaments approximately 2-6 nm in diameter (> 10 microns in length) many with a conspicuous approximately 67-nm axial period were observed. Occasional mature collagen fibrils with a approximately 67-nm axial repeat were found late in the course of assembly. Our results are consistent with initial end-to-end axial association of monomers to form oligomers followed by lateral association into higher-order filaments. On this basis, there appears to be at least two distinctive types of structural interactions (axial and lateral) which are operative at different levels in the assembly hierarchy of collagen.     

Surface ultrastructure of SARS coronavirus revealed by atomic force microscopy

Atomic force microscopy has been used to probe the surface nanostructures of severe acute respiratory syndrome coronavirus (SARS-CoV). Single crown-like virion was directly visualized and quantitative measurements of the dimensions for the structural proteins were provided. A corona of large, distinctive spikes in the envelope was measured after treatment with hydroxyoctanoic acid. High-resolution images revealed that the surface of each single SARS-CoV was surrounded with at least 15 spherical spikes having a diameter of 7.29 +/- 0.73 nm, which is in close agreement with that of S glycoproteins earlier predicted through the genomes of SARS-CoV. This study represents the first direct characterization of the surface ultrastructures of SARS-CoV particles at the nanometre scale and offers new prospects for mapping viral surface properties.     

Fibrous long spacing type collagen fibrils have a hierarchical internal structure

Nanodissection of single fibrous long spacing (FLS) type collagen fibrils by atomic force microscopy (AFM) reveals hierarchical internal structure: Fibrillar subcomponents with diameters of approximately 10 to 20 nm were observed to be running parallel to the long axis of the fibril in which they are found. The fibrillar subcomponent displayed protrusions with characteristic approximately 270 nm periodicity, such that protrusions on neighboring subfibrils were aligned in register. Hence, the banding pattern of mature FLS-type collagen fibrils arises from the in-register alignment of these fibrillar subcomponents. This hierarchical organization observed in FLS-type collagen fibrils is different from that previously reported for native-type collagen fibrils, displaying no supercoiling at the level of organization observed.     

Subfibrillar structure of type I collagen observed by atomic force microscopy.

We have imaged native rat tail and reconstituted bovine dermal type I collagen by atomic force microscopy, obtaining a level of detail comparable to that obtained on the same samples by transmission electron microscopy. The characteristic 60-70 nm D periodicity consists of ridges exhibiting high tip-sample adhesion alternating with 5-15-nm-deep grooves having low adhesion. We also observe an intraperiod or "minor" band consisting of 1-nm-deep grooves, and "microfibrils" arranged parallel to or inclined approximately 5 degrees to the fibril axis. In air collagen fibrils exhibit negligible compression under the forces exerted by the tip. When immersed in water the subfibrillar features disappear and the fibrils become softer, compressing by 5% of their height under an 11-nN force. Material on the surface of the sample sometimes accumulates on the atomic force microscope tip; contrary to expectation such tip contamination can improve as well as reduce resolution.     

Hyaluronic acid by atomic force microscopy.

Hyaluronic acid (HA) of different molecular weights has been examined by atomic force microscopy (AFM) in air. This technique allows 3-D surface images of soft samples without any pretreatment, such as shadowing or staining. In the present study we examined the supermolecular organization of HA chains when deposited on mica and graphite, to better understand the interchain and intrachain interactions of HA molecules in solution. The concentration of the solution deposited varied from 0.001 to 1 mg/ml. On both substrates, and independent of the concentration, high-molecular-mass HA formed networks in which molecules ran parallel for hundreds of nanometers, giving rise to flat sheets and tubular structures that separate and rejoin into similar neighboring aggregates. Accurate measurements of the thickness of the thinnest sheets were consistent with a monolayer of HA molecules, 0.3 nm thick, strongly indicating lateral aggregation forces between chains as well as rather strong hydrophilic interactions between mica and HA. The results agree with an existing model of HA tertiary structure in solution in which the network is stabilized by both hydrophilic and hydrophobic interactions. Our images support this model and indicate that hydrophobic interactions between chains may exert a pivotal role in aqueous solution.     

Thermal denaturation studies of collagen by microthermal analysis and atomic force microscopy

The structural properties of collagen have been the subject of numerous studies over past decades, but with the arrival of new technologies, such as the atomic force microscope and related techniques, a new era of research has emerged. Using microthermal analysis, it is now possible to image samples as well as performing localized thermal measurements without damaging or destroying the sample itself. This technique was successfully applied to characterize the thermal response between native collagen fibrils and their denatured form, gelatin. Thermal transitions identified at (150 ± 10)°C and (220 ± 10)°C can be related to the process of gelatinization of the collagen fibrils, whereas at higher temperatures, both the gelatin and collagen samples underwent two-stage transitions with a common initial degradation temperature at (300 ± 10)°C and a secondary degradation temperature of (340 ± 10)°C for the collagen and of (420 ± 10)°C for the gelatin, respectively. The broadening and shift in the secondary degradation temperature was linked to the spread of thermal degradation within the gelatin and collagen fibrils matrix further away from the point of contact between probe and sample. Finally, similar measurements were performed inside a bone resorption lacuna, suggesting that microthermal analysis is a viable technique for investigating the thermomechanical response of collagen for in situ samples that would be, otherwise, too challenging or not possible using bulk techniques.     

Observing growth steps of collagen self-assembly by time-lapse high-resolution atomic force microscopy

Insights into molecular mechanisms of collagen assembly are important for understanding countless biological processes and at the same time a prerequisite for many biotechnological and medical applications. In this work, the self-assembly of collagen type I molecules into fibrils could be directly observed using time-lapse atomic force microscopy (AFM). The smallest isolated fibrillar structures initiating fibril growth showed a thickness of approximately 1.5 nm corresponding to that of a single collagen molecule. Fibrils assembled in vitro established an axial D-periodicity of approximately 67 nm such as typically observed for in vivo assembled collagen fibrils from tendon. At given collagen concentrations of the buffer solution the fibrils showed constant lateral and longitudinal growth rates. Single fibrils continuously grew and fused with each other until the supporting surface was completely covered by a nanoscopically well-defined collagen matrix. Their thickness of approximately 3 nm suggests that the fibrils were build from laterally assembled collagen microfibrils. Laterally the fibrils grew in steps of approximately 4 nm, indicating microfibril formation and incorporation. Thus, we suggest collagen fibrils assembling in a two-step process. In a first step, collagen molecules assemble with each other. In the second step, these molecules then rearrange into microfibrils which form the building blocks of collagen fibrils. High-resolution AFM topographs revealed substructural details of the D-band architecture of the fibrils forming the collagen matrix. These substructures correlated well with those revealed from positively stained collagen fibers imaged by transmission electron microscopy.     

Imaging biomolecule arrays by atomic force microscopy.

We describe here a method for constructing ordered molecular arrays and for detecting binding of biomolecules to these arrays using atomic force microscopy (AFM). These arrays simplify the discrimination of surface-bound biomolecules through the spatial control of ligand presentation. First, photolithography is used to spatially direct the synthesis of a matrix of biological ligands. A high-affinity binding partner is then applied to the matrix, which binds at locations defined by the ligand array. AFM is then used to detect the presence and organization of the high-affinity binding partner. Streptavidin-biotin arrays of 100 x 100 microns and 8 x 8 microns elements were fabricated by this method. Contact and noncontact AFM images reveal a dense lawn of streptavidin specific to the regions of biotin derivatization. These protein regions are characterized by a height profile of approximately 40 A over the base substrate with a 350-nm edge corresponding to the diffraction zone of the photolithography. High resolution scans reveal a granular topography dominated by 300 A diameter features. The ligand-bound protein can then be etched from the substrate using the AFM tip, leaving an 8 A shelf that probably corresponds to the underlying biotin layer.     

Imaging polysaccharides by atomic force microscopy

Techniques have been developed for the routine reliable imaging of polysaccharides by atomic force microscopy (AFM). The polysaccharides are deposited from aqueous solution onto the surface of freshly cleaved mica, air dried, and then imaged under alcohols. The rationale behind the development of the methodology is described and data is presented for the bacterial polysaccharides xanthan, acetan, and the plant polysaccharides 1-carrageenan and pectin. Studies on uncoated polysaccharides have demonstrated the improved resolution achievable when compared to more traditional metal-coated samples or replicas. For acetan the present methodology has permitted imaging of the helical structure. Finally, in addition to data obtained on individual polysaccharides, AFM images have also been obtained of the network structures formed by κ-carrageenan and gellan gum. © 1996 John Wiley & Sons, Inc.     

Imaging the RecA-DNA complex by atomic force microscopy.

Atomic force microscopy (AFM) was applied to study the RecA protein and its complexes with DNA in air and in aqueous solution. RecA and DNA were reacted under several conditions, and deposited onto a mica substrate pre-treated in various ways. We found that the structure of the RecA and RecA-DNA complexes, especially the height of the molecules, was affected by the sample preparation method such as gel filtration, and environment during imaging.     

Analysis off cereal chromosomes by atomic force microscopy.

Atomic force microscopy has been applied to the study of plant chromosomes from cereal grasses Triticum aestivum (bread wheat), Triticum tauschii, and Hordeum vulgare (barley). Using standard mitotic metaphase squashes, high resolution images have been obtained of untreated chromosomes and also of chromosomes after C-banding, N-banding, and in situ hybridization. The true 3-dimensional nature of the images permits detailed analysis of the surface structure and, on untreated uncoated chromosomes, surface features on a length scale consistent with nucleosome structures have been observed. C+ and N+ regions are manifest as areas of high relief on a slightly collapsed chromosome structure. In situ hybridization leads to a more severe degradation of the native structure, although it is still possible to correlate the optical signal with the topography of the hybridized chromosome. Key words : atomic force microscope, AFM, chromosomes, C-banding, in situ hybridization.     

Biomolecular interactions measured by atomic force microscopy

Atomic force microscopy (AFM) is nowadays frequently applied to determine interaction forces between biological molecules. Starting with the detection of the first discrete unbinding forces between ligands and receptors by AFM only several years ago, measurements have become more and more quantitative. At the same time, theories have been developed to describe and understand the dynamics of the unbinding process and experimental techniques have been refined to verify this theory. In addition, the detection of molecular recognition forces has been exploited to map and image the location of binding sites. In this review we discuss the important contributions that have led to the development of this field. In addition, we emphasize the potential of chemically well-defined surface modification techniques to further improve reproducible measurements by AFM. This increased reproducibility will pave the way for a better understanding of molecular interactions in cell biology.     

In situ atomic force microscopy of partially demineralized human dentin collagen fibrils

Dentin collagen fibrils were studied in situ by atomic force microscopy (AFM). New data on size distribution and the axial repeat distance of hydrated and dehydrated collagen type I fibrils are presented. Polished dentin disks from third molars were partially demineralized with citric acid, leaving proteins and the collagen matrix. At this stage collagen fibrils were not resolved by AFM, but after exposure to NaOCl(aq) for 100-240 s, and presumably due to the removal of noncollagenous proteins, individual collagen fibrils and the fibril network of dentin connected to the mineralized substrate were revealed. High-aspect-ratio silicon tips in tapping mode were used to image the soft fibril network. Hydrated fibrils showed three distinct groups of diameters: 100, 91, and 83 nm and a narrow distribution of the axial repeat distance at 67 nm. Dehydration resulted in a broad distribution of the fibril diameters between 75 and 105 nm and a division of the axial repeat distance into three groups at 67, 62, and 57 nm. Subfibrillar features (4 nm) were observed on hydrated and dehydrated fibrils. The gap depth between the thick and thin repeating segments of the fibrils varied from 3 to 7 nm. Phase mode revealed mineral particles on the transition from the gap to the overlap zone of the fibrils. This method appears to be a powerful tool for the analysis of fibrillar collagen structures in calcified tissues and may aid in understanding the differences in collagen affected by chemical treatments or by diseases.     

Single protein misfolding events captured by atomic force microscopy.

Using single protein atomic force microscopy (AFM) techniques we demonstrate that after repeated mechanical extension/relaxation cycles, tandem modular proteins can misfold into a structure formed by two neighboring modules. The misfolding is fully reversible and alters the mechanical topology of the modules while it is about as stable as the original fold. Our results show that modular proteins can assume a novel misfolded state and demonstrate that AFM is able to capture, in real time, rare misfolding events at the level of a single protein.     

RecA-double stranded DNA complexes studied by atomic force microscopy.

RecA-double stranded (ds) DNA complexes have been studied by atomic force microscopy (AFM). When the complexes were prepared in the presence of ATP gamma S, fully covered RecA-dsDNA filaments were observed by AFM. When the concentration of RecA proteins was lower, various lengths of filaments were found. The variation of the observed structures may directly reflect the real distribution of the intermediate complexes in the reaction mixture, as the mixture was simply deposited on a mica surface for AFM observation without special fixation or staining. The use of a carbon nanotube (CNT) AFM tip enabled high resolution to reveal the periodicity of RecA-dsDNA filaments. Our observations demonstrated the potential of the AFM method for the structural studies of the RecA-dsDNA complexes, especially their intermediate states.     

Visualization of plant cell walls by atomic force microscopy.

Atomic force microscopy has been used to visualize the ultrastructure of hydrated plant cell wall material from prepared apple (Malus pumila MILL; Cox orange pippin), water chestnut (Eleocharis dulcis L.), potato (Solanum tuberosum L.; Bintje), and carrot (Daucus carota L.; Amsterdamse bak) parenchyma. Samples of cell wall material in aqueous suspension were deposited onto freshly cleaved mica. Excess water was blotted away and the moist samples were imaged in air at ambient temperature and humidity. The three-dimensional images obtained highlighted the layered structure of the plant cell walls and revealed features interpreted as individual cellulose microfibrils and plasmodesmata.