Prevention of marine biofouling using a conductive paint electrode

Conductive paint electrode was used for marine biofouling on fishing nets by electrochemical disinfection. When a potential of 1.2 V vs. a saturated calomel electrode (SCE) was applied to the conductive paint electrode, Vibrio alginolyticus cells attached on the electrode were completely killed. By applying a negative potential, the attached cells were removed from the surface of the electrode. Changes in pH and chlorine concentration were not observed at potentials in the range -0.6 approximately 1.2 V vs. SCE. In a field experiment, accumulation of the bacterial cells and formation of biofilms on the electrode were prevented by application of an alternating potential, and 94% of attachment of the biofouling organisms was inhibited electrically on yarn used for fishing net coated with conductive paint. Copyright 1998 John Wiley & Sons, Inc.     

SiO2/SnO2/Sb2O5 microporous ceramic material for immobilization of Meldola's blue: application as an electrochemical sensor for NADH

The mixed oxide SiO(2)/SnO(2), containing 25 wt% of SnO(2), determined by X-ray fluorescence, was prepared by the sol-gel method and the porous matrix obtained was then grafted with Sb (V), resulting the solid designated as (SiSnSb). XPS indicated 0.7% of Sb atoms on the surface. Sb grafted on the surface contains Br?nsted acid centers (SbOH groups) that can immobilize Meldola's blue (MB(+)) cationic dye onto the surface by an ion exchange reaction, resulting the solid designated as (SiSnSb/MB). In the present case a surface concentration of MB(+)=2.5×10(-11) mol cm(2) on the surface was obtained. A homogeneous mixture of the SiSnSb/MB with ultra pure graphite (99.99%) was pressed in disk format and used to fabricate a working electrode that displayed an excellent specific electrocatalytic response to NADH oxidation, with a formal potential of -0.05 V at pH 7.3. The electrochemical properties of the resulting electrode were investigated thoroughly with cyclic voltammetric and chronoamperometry techniques. The proposed sensor showed a good linear response range for NADH concentrations between 8×10(-5) and 9.0×10(-4) mol L(-1), with a detection limit of 1.5×10(-7) mol L(-1). The presence of dopamine and ascorbic acid did not show any interference in the detection of NADH on this modified electrode surface.     

Electrochemical Prevention of Marine Biofouling with a Carbon-Chloroprene Sheet

A carbon-chloroprene sheet (CCS) electrode was used for the electrochemical disinfection of the marine gram-negative bacterium Vibrio alginolyticus. When the electrode was incubated in seawater containing 10⁵ cells per ml for 90 min, the amount of adsorbed cells was 4.5 × 10³ cells per cm². When a potential of 1.2 V versus a saturated calomel electrode was applied to the CCS for 20 min, 67% of adsorbed cells were killed. This disinfection was due to the direct electrochemical oxidation of cells and not to a change in pH or to the generation of toxic substances, such as chlorine. In a 1-year field experiment, marine biofouling of a CCS-coated cooling pipe caused by attachment of bacteria and invertebrates was considerably reduced by application of a potential of 1.2 V versus a saturated calomel electrode. Since this method requires low potential electrical energy, use of a CCS coating appears to be a suitable method for the clean prevention of marine biofouling.     

Electrochemical prevention of marine biofouling on a novel titanium-nitride-coated plate formed by radio-frequency arc spraying

We have developed a new method for forming titanium-nitride(TiN)-coated plates using radio-frequency arc spraying (RFAS). A TiN coating formed by RFAS has been used for electrochemical prevention of marine biofouling. X-ray diffraction and X-ray photoelectron spectroscopy indicate that a TiN composite film containing Ti was formed on a polyethylene terephthalate plate surface when Ti was sprayed by RFAS under atmospheric pressure. A cyclic voltammogram (scan rate 20 mV/s) of the TiN formed by RFAS revealed no oxidative and reductive peak currents in the range −0.6 V to 1.2 V against a saturated silver/silver chloride (Ag/AgCl) electrode. When a potential of 1.0 V against Ag/AgCl was applied to the electrode in seawater, no dissolved Ti was detected. Changes in pH and the chlorine concentration were not observed in this range. In all, only 4.5% of the Vibrio alginolyticus cells attached to the electrode survived when a potential of 0.8 V against Ag/AgCl was applied in seawater for 30 min. In field experiments, attachment of the organisms to the TiN electrode was inhibited by applying an alternating potential of 1.0 V and −0.6 V against Ag/AgCl. The TiN film can be formed by RFAS on large and intricately shaped surfaces, and it is a practical electrode for the electrochemical prevention of fouling of various marine structures. Received: 17 April 1998 / Received revision: 5 June 1998 / Accepted: 19 June 1998     

TiO2 nanoparticles are phototoxic to marine phytoplankton

Nanoparticulate titanium dioxide (TiO(2)) is highly photoactive, and its function as a photocatalyst drives much of the application demand for TiO(2). Because TiO(2) generates reactive oxygen species (ROS) when exposed to ultraviolet radiation (UVR), nanoparticulate TiO(2) has been used in antibacterial coatings and wastewater disinfection, and has been investigated as an anti-cancer agent. Oxidative stress mediated by photoactive TiO(2) is the likely mechanism of its toxicity, and experiments demonstrating cytotoxicity of TiO(2) have used exposure to strong artificial sources of ultraviolet radiation (UVR). In vivo tests of TiO(2) toxicity with aquatic organisms have typically shown low toxicity, and results across studies have been variable. No work has demonstrated that photoactivity causes environmental toxicity of TiO(2) under natural levels of UVR. Here we show that relatively low levels of ultraviolet light, consistent with those found in nature, can induce toxicity of TiO(2) nanoparticles to marine phytoplankton, the most important primary producers on Earth. No effect of TiO(2) on phytoplankton was found in treatments where UV light was blocked. Under low intensity UVR, ROS in seawater increased with increasing nano-TiO(2) concentration. These increases may lead to increased overall oxidative stress in seawater contaminated by TiO(2), and cause decreased resiliency of marine ecosystems. Phototoxicity must be considered when evaluating environmental impacts of nanomaterials, many of which are photoactive.     

TiO2/MWNTs nanocomposites-based electrochemical strategy for label-free assay of casein kinase II activity and inhibition

In this paper, a novel label-free electrochemical strategy has been developed for assay of casein kinase II (CK2) activity and inhibition using TiO(2)/MWNTs nanocomposites. This detection system takes advantage of specific binding of the phosphate groups with TiO(2) nanoparticles and fast electron transfer rate of MWNTs. In this strategy, the synthesized TiO(2)/MWNTs nanocomposite was firstly deposited on the surface of a glassy carbon electrode (GCE). The presence of MWNTs not only increased the surface area of the electrode but also promoted electron-transfer reaction. In the presence of CK2, the kinase reaction resulted in the phosphorylation of peptide substrates. The phosphorylated peptides were subsequently captured to the surface of GCE modified with TiO(2)/MWNTs nanocomposite through specific binding of the phosphate groups with TiO(2) nanoparticles. Then the access of redox probe [Fe(CN)(6)](3-/4-) to electrode surface was blocked. As a result, the decrease peak currents were related to the concentrations of the CK2, providing a sensing mechanism for monitoring peptides phosphorylation. The electrochemical strategy can be employed to assay CK2 activity with a low detection limit of 0.07 U/mL. The linear range of the assay for CK2 was 0-0.5 U/mL. Furthermore, the interferences experiments of PKA and inhibition of CK2 have been also studied by using this strategy.     

Design of highly efficient receptor sites by combination of cyclodextrin units and molecular cavity in TiO2 ultrathin layer

A highly effective approach was developed for sensitive detection of organic substances in water. In order to achieve high sensitivity and selective detection for aromatic compounds, cyclodextrin (CD) hosts and imprinting effects were combined to fabricate binding sites within TiO(2) ultrathin layer. The electrode surface was modified with ultrathin TiO(2) gel film containing a 2:1 complex of beta-CD and bisphenol A (BPA), and then the BPA moiety was removed by washing. The resulting BPA-imprinted TiO(2)/beta-CD film showed specific and sensitive detection of BPA, as confirmed by quartz crystal microbalance (QCM) and cyclic surface-polarization impedance (cSPI) measurements. The high selectivity for BPA relative to structurally related guest molecules was estimated to be 1.6-3.4 at the guest concentration of 2x10(-7)M, and was considered to arise from the synergic effect of the binding site.     

Photoelectrocatalytic treatment of pentachlorophenol in aqueous solution using a rutile nanotube-like TiO2/Ti electrode.

Taking pentachlorophenol (PCP) as a reference, we investigated the photoelectrocatalytic degradation of organic pollutants using a rutile nanotube-like TiO(2)/Ti film electrode. The nanotube-like TiO2 electrode was prepared by first oxidizing the surface of a titanium sheet to form rutile TiO2 and then treating it to form the tubular structure in NaOH aqueous solution. The occurrence of PCP degradation was indicated by the decrease in pH, concentration of PCP and TOC, and by the formation of chloride ions. The photoelectrochemical (PEC) efficiency of the nanotube-like TiO2/Ti electrode has been determined in terms of degradation of PCP and the incident photo-to-current conversion efficiency (IPCE). The experimental results showed that PCP could be degraded more efficiently by a photoelectrocatalytic process than by a photocatalytic or electrochemical oxidation alone. A significant photoelectrochemical synergetic effect was observed. The kinetic constant of PEC degradation of PCP using a nanotube-like TiO2 electrode was over 60% higher than that using a TiO2 film electrode. It is noted that chloride ion and hydrogen ion concentration increased with irradiation time in the PEC degradation of PCP; PCP was gradually mineralized and the complete minimization of PCP took more time than its degradation.     

High hydrogen production rate of microbial electrolysis cell (MEC) with reduced electrode spacing

Practical applications of microbial electrolysis cells (MECs) require high hydrogen production rates and a compact reactor. These goals can be achieved by reducing electrode spacing but high surface area anodes are needed. The brush anode MEC with electrode spacing of 2 cm had a higher hydrogen production rate and energy efficiency than an MEC with a flat cathode and a 1-cm electrode spacing. The maximum hydrogen production rate with a 2 cm electrode spacing was 17.8 m(3)/m(3)d at an applied voltage of E(ap)=1 V. Reducing electrode spacing increased hydrogen production rates at the lower applied voltages, but not at the higher (>0.6 V) applied voltages. These results demonstrate that reducing electrode spacing can increase hydrogen production rate, but that the closest electrode spacing do not necessarily produce the highest possible hydrogen production rates.     

Association of the physical and chemical properties and the cytotoxicity of metal oxide nanoparticles: metal ion release, adsorption ability and specific surface area

Association of cellular influences and physical and chemical properties were examined for 24 kinds of industrial metal oxide nanoparticles: ZnO, CuO, NiO, Sb(2)O(3), CoO, MoO(3), Y(2)O(3), MgO, Gd(2)O(3), SnO(2), WO(3), ZrO(2), Fe(2)O(3), TiO(2), CeO(2), Al(2)O(3), Bi(2)O(3), La(2)O(3), ITO, and cobalt blue pigments. We prepared a stable medium dispersion for each nanoparticle and examined the influence on cell viability and oxidative stress together with physical and chemical characterizations. ZnO, CuO, NiO, MgO, and WO(3) showed a large amount of metal ion release in the culture medium. The cellular influences of these soluble nanoparticles were larger than insoluble nanoparticles. TiO(2), SnO(2), and CeO(2) nanoparticles showed strong protein adsorption ability; however, cellular influences of these nanoparticles were small. The primary particle size and the specific surface area seemed unrelated to cellular influences. Cellular influences of metal oxide nanoparticles depended on the kind and concentrations of released metals in the solution. For insoluble nanoparticles, the adsorption property was involved in cellular influences. The primary particle size and specific surface area of metal oxide nanoparticles did not affect directly cellular influences. In conclusion the most important cytotoxic factor of metal oxide nanoparticles was metal ion release.     

Electrochemical optical waveguide lightmode spectroscopy (EC-OWLS): a pilot study using evanescent-field optical sensing under voltage control to monitor polycationic polymer adsorption onto indium tin oxide (ITO)-coated waveguide chips

A new technique has been developed that combines evanescent-field optical sensing with electrochemical control of surface adsorption processes. This new technique, termed "electrochemical optical waveguide lightmode spectroscopy" (EC-OWLS), proved efficient in monitoring molecular surface adsorption and layer thickness changes of an adsorbed polymer layer examined in situ as a function of potential applied to a waveguide in a pilot study. For optical sensing, a layer of indium tin oxide (ITO) served as both a high-refractive-index waveguide and a conductive electrode. In addition, an electrochemical flow-through fluid cell was provided, which incorporated working, reference, and counter electrodes, and was compatible with the constraints of optical sensing. Poly(L-lysine)-grafted-poly(ethylene glycol) (PLL-g-PEG) served as a model, polycation adsorbate. Adsorption of PLL-g-PEG from aqueous buffer solution increased from 125 to 475 ng/cm(2 )along a sigmoidal path as a function of increasing potential between 0 and 1.5 V versus the Ag reference electrode. Upon buffer rinse, adsorption was partially reversible when a potential of >/=0.93 V was maintained on the ITO waveguide. However, reducing the applied potential back to 0 V before rinsing resulted in irreversible polymer adsorption. PLL-g-PEG modified with biotin demonstrated similar adsorption characteristics, but subsequent streptavidin binding was independent of biotin concentration. Applying positive potentials resulted in increased adsorbed mass, presumably due to polymer chain extension and reorganization in the molecular adlayer.     

Speciation of antimony in natural waters : the determination of Sb(III) and Sb(V) by continuous flow hydride generation-atomic absorption spectrometry

Abstract

A new procedure for the speciation of dissolved antimony is described. This makes use of complexation with citrate to prevent, preferentially, the formation of hydride from Sb(V) and allow the selective determination of Sb(III) to be made by continuous flow hydride generation - atomic absorption spectrometry. When the citric acid (12% m/V) is replaced by potassium iodide (3% m/V), total antimony is determined and the concentration of Sb(V) can be obtained by difference. The determination of the antimony species is dominated in this new procedure by the complexation of Sb(V) with citrate and the effect of pH is limited to a minor, re-inforcing role. This permits acidification to be made with hydrochloric acid. The principal interfering species in the determination of total antimony and Sb(III) is Fe³⁺, with Fe²⁺, Cu²⁺ and Ni²⁺ showing lesser effects on Sb(III). The technique is applied successfully to synthetic mixtures and to natural waters from the environment of a disused antimony mine.

The characteristic concentration obtained for antimony was 0.7 ng mL^–1 and the detection limit 1 ng mL^–1.     

Cathodic electrochemiluminescent behavior of luminol at nafion-nano-TiO2 modified glassy carbon electrode

The electrochemiluminescence (ECL) behavior of luminol on a nafion-nano-TiO(2) modified glassy carbon electrode (nafion-nano-TiO(2)--GCE) was studied. Two ECL peaks (ECL-1 and ECL-2) were found during cathodic potential scanning. ECL-1 at ca -0.4 V (vs Ag--AgCl reference electrode) came from the reaction between luminol and active oxygen anion produced at the GCE surface directly, while ECL-2 at ca -0.9 V (vs Ag--AgCl reference electrode) came from the reaction between luminol and the active oxygen anion catalyzed by TiO(2.) The possible mechanism for the generation of both ECL peaks has been proposed. The reproducibility of the ECL intensities on nafion-nano-TiO(2)--GCE at ECL-1 and ECL-2 was good, with relative standard deviations (n = 10) of 4.3 and 1.3%, respectively. The ECL-2 generated at the nafion-nano-TiO(2)--GCE surface was further developed to detect the dissolved oxygen, and a detection limit of 0.02 mg/L was achieved. The proposed method was applied to detect dissolved oxygen in water with satisfactory result.     

Disinfection of microorganisms by use of electrochemically regenerated periodate

A new method for disinfection of microorganisms by electrochemically regenerated periodate was developed. Oxidation of iodate to periodate was observed at 1.25 V versus a silver/silver chloride electrode in a cyclic voltammogram of potassium iodate. When 1.25 V was applied in 1.0 mM potassium iodate, approximately 4-log inactivation of Escherichia coli was observed in 30 min.     

Fluorometric observation of viable and dead adhering diatoms using TO-PRO-1 iodide and its application to the estimation of electrochemical treatment

A rapid method for the direct measurement of viable and dead adhering diatoms was developed using a fluorescent dye, TO-PRO-1 iodide. By staining the marine diatom, Nitzchia closterium, with TO-PRO-1 iodide, viable and dead cells were identified as red and yellow cells respectively, under an epifluorescence microscope employing blue excitation. Only dead cells were stained with TO-PRO-1 iodide. Viable cells were observed as red because of autofluorescence arising from intracellular chlorophyll, whereas dead cells were observed as yellow because of the fluorescence of TO-PRO-1 iodide. The percentage of TO-PRO-1-iodide-stained was correlated with the percentage of dead cells in N. closterium cells exposed to heat (60 °C, 15 min). Other microalgae containing intracellular chlorophyll could be also distinguished as viable or dead cells by this fluorometric staining method. This method was applied for the assessment of N. closterium cells killed by the electrochemical treatment and used to monitor biofouling populations and their viability directly on the electrode surface. When 1.0 V was applied against a saturated calomel electrode, 99% of the cells attached to graphite electrode were killed in 1 h. Received: 7 August 1998 / Received revision: 16 October 1998 / Accepted: 7 November 1998     

Non-destructive estimation of root mass using electrical capacitance on ten herbaceous species

Background and Aims

Characteristically baseline levels of Sb in the environment are low, but problematic local elevation trends arise from anthropogenic activities such as mining and incineration. Arsenic (analog of Sb) accumulation by rice can be reduced by iron (Fe) plaque. A hydroponic experiment was conducted to investigate whether Fe plaque could reduce the uptake and translocation of different Sb species in different rice cultivars.

Methods

After Fe plaque on rice roots was induced in solution containing 0, 0.2, 0.4, 0.7, 1.2, 2.0?mM Fe²⁺ for 24?h, seedlings were transferred into nutrient solution with 20?μM Sb(V) or Sb(III) for 3?d.

Results

About 60–80% (Sb(III) treatment) and 40–60% (Sb(V) treatment) of the total Sb accumulated in Fe plaque. There was a significant correlation between the concentrations of Sb and Fe on the root surface. A similar relationship was observed in roots and shoots. Cultivar (Jiahua 1) formed the most Fe plaque, had the highest Fe associated Sb sequestration but the lowest Sb concentration in the root interior.

Conclusions

Fe plaque may act as a ‘buffer’ for Sb(V) and Sb(III) in the rhizosphere, and cultivars played an important role in the different species Sb uptake and translocation.     

Attachment and Detachment of Living Microorganisms Using a Potential-Controlled Electrode

We developed an electrical modulation method for attachment and detachment of microorganisms. Living microorganisms suspended in non-nutritive media such as PBS(?) and artificial seawater were attracted by and selectively attached to indium tin oxide (ITO)/glass electrode regions to which a negative potential was applied. The microorganisms suspended in LB medium and glucose solution were not attracted to the ITO electrode. Dead microorganisms were not attracted to the ITO electrode. The living microorganisms were retrieved after detachment from the ITO electrode by application of a high-frequency triangular wave potential. When we applied this method to separate microorganisms from deep-sea sediment, bacteria belonging to 19 phyla and 23 classes were collected without undesirable high molecular weight contaminants such as humic acids. At the phylum and class level, respectively, 95 and 87 % of the phylotypes among electrically retrieved bacteria were common to the gene clones from the direct sediment DNA extraction. This technique is a novel useful method to prepare bacterial cells in a single population or a community for metagenomic analyses.     

Microbial electrode sensor for alcohols

A microbial electrode consisting of immobilized microorganisms, a gas permeable Teflon membrane, and an oxygen electrode was prepared for the continuous determination of methyl and ethyl alcohols. Immobilized Trichosporon brassicae was employed for a microbial electrode sensor for ethyl alcohol. When a sample solution containing ethyl alcohol was injected into a microbial electrode system, the current of the electrode decreased markedly with time until a steady state was reached. The response time was within 10 min by the steady state method and within 6 min by the pulse method. A linear relationship was observed between the current decrease and the concentration of ethyl alcohol below 22.5 mg/liter. The current was reproducible within ± 6% of the relative error when a sample solution containing 16.5 mg/liter ethyl alcohol. The standard deviation was 0.5 mg/liter in 40 experiments. The selectivity of the microbial electrode sensor for ethyl alcohol was satisfactory. The microbial electrode sensor was applied to a fermentation broth of yeasts and satisfactory comparative results were obtained (correlation coefficient 0.98). The current output of the microbial electrode sensor was almost constant for more than three weeks and 2100 assays. A microbial electrode sensor using immobilized bacteria for methyl alcohol was also described.     

Microbial Flora of Pacific Oysters (Crassostrea gigas) Subjected to Ultraviolet-Irradiated Seawater

The ability of oysters to purge themselves of microbial contaminants was investigated by identifying the microorganisms retained by oysters after they have been subjected to ultraviolet (UV) light-treated seawater. A UV intensity of 960 muw per min per cm(2) reduced the microbial count of seawater from 263 to 13 per ml. The coliform multitube test (MPN) was reduced from a high of 17 to <0.18 per 100 ml. Over 75% of the microorganisms found in treated seawater were Acinetobacter/Moraxella, Vibrio/Pseudomonas type II, and Flavobacterium/Cytophaga. With the exception of coliforms, the microbial composition of oysters subjected to UV-treated seawater remained at levels comparable to the control oysters held in untreated seawater. Total counts ranged between 10(3) and 10(5)/g. The microorganism most frequently encountered were Flavobacterium/Cytophaga, Vibrio/Pseudomonas type II, Pseudomonas type III or IV, Acinetobacter/Moraxella, gram-positive cocci and Bacillus. Together they comprised over 90% of the flora. Coagulase-positive, deoxyribonuclease-positive, and beta-hemolytic cocci were found in some samples, as were V. parahaemolyticus, V. aliginolyticus, and Aeromonas species.     

Removal of Toxoplasma gondii Oocysts from Sea Water by Eastern Oysters (Crassostrea virginica)

SUMMARY. Toxoplasma gondii infections have been reported in a number of marine mammals. Presently it is not known how these animals acquire T. gondii from their aquatic environment. The eastern oyster, Crassostrea virginica , has been shown to remove Cryptosporidium oocysts from seawater and a similar phenomenon may be occurring with T. gondii oocysts and marine invertebrates. The present study was done to determine if eastern oysters could remove and retain T. gondii oocysts from seawater. Oocysts of the VEG strain of T. gondii (1 × 10⁶ oocysts) were placed in seawater (32 ppt NaCl) containing live eastern oysters. The infected seawater was removed one day postinoculation (PI) and replaced with fresh seawater. Selected oysters were removed at 1, 3 and 6 days PL Hemolymph, gill washes, and oyster tissue were collected separately at each observation time. The oyster tissue was homogenized and all 3 samples fed separately to mice. Toxoplasma gondii positive mice were observed at each time period. The results indicate that T. gondii oocysts can be removed from seawater by eastern oysters and retain their infectivity. Contaminated raw oysters may serve as a source of T. gondii infection for marine mammals and humans.