Tuning Plasmonic Near-Perfect Absorber for Selective Absorption Applications

In this study, we present a high-performance tunable plasmonic absorber based on metal-insulator-metal nanostructures. High absorption is supported over a wide range of wavelengths, which is retained well at a very wide range of incident angles too. The coupling process occurs with high absorption efficiency of ∼ 99% by tuning the thickness of the dielectric layer. In addition, a complex trapezoidal nanostructure based on simple metal-insulator-metal structures by stacking different widths of Cu strip-nanostructures in the vertical direction has been put forward to enhance light absorption based on selective absorption. A trapezoidal sample has been designed with a solar absorption as high as 95% at wavelengths ranging from 300 nm to 2000 nm for different operating temperatures. Furthermore, the optical absorber has a very simple geometric structure and is easy to integrate into complex photonic devices. Perfect absorption and easy fabrication of the metal-insulator-metal structure make it an attractive device in numerous photonic applications.

     

Optimized Electroless Silver Coating for Optical and Plasmonic Applications

Electroless metal deposition is a simple and convenient technique to fabricate metallic films and to provide isotropic metal functionalization of 3D structures with complex geometries. In this work, we describe the synthesis of silver coatings by means of a modified Tollens reaction and their use as optical coating. The chemical composition of the metallization bath is here addressed to optimize the metal coating deposition. The synthesis parameters have been tailored in order to deposit very smooth films which were characterized by scanning electron microscopy, atomic force microscopy, and optical spectroscopy. 2D diffraction gratings and sinusoidal plasmonic gratings were produced with the proposed method. Optical characterization confirmed the plasmonic activities of the resultant structures, proving the efficiency of the described method for optical applications. Thermal annealing was found to improve the surface roughness of the coating and therefore the optical properties of the plasmonic gratings.     

Plasmonic Optical Properties and Applications of Metal Nanostructures

In this review article, we provide an overview of recent research activities in the study of plasmonic optical properties of metal nanostructures with emphasis on understanding the relation between surface plasmon absorption and structure. Both experimental results and theoretical calculations have indicated that the plasmonic absorption strongly depends on the detailed structure of the nanomaterials. Examples discussed include spherical nanoparticles, nanorods, nanowires, hollow nanospheres, aggregates, and nanocages. Plasmon–phonon coupling measured from dynamic studies as a function of particle size, shape, and aggregation state is also reviewed. The fascinating optical properties of metal nanostructures find important applications in a number of technological areas including surface plasmon resonance, surface-enhanced Raman scattering, and photothermal imaging and therapy. Their novel optical properties and emerging applications are illustrated using specific examples from recent literature. The case of hollow nanosphere structures is highlighted to illustrate their unique features and advantages for some of these applications.     

Novel Apolar Plasmonic Nanostructures with Extended Optical Tunability for Sensing Applications

This paper outlines the design of complex nanostructures with apolar behavior which pave the way to a wider range of plasmon resonance tuning and applications requiring higher enhancement. These new nanostructure families are simply defined by symmetry considerations. An irreducible decomposition of optical response tensor demonstrates that nanoparticles which belong to C _n , with n?≥?3, symmetry point group for at least one scale have an optical response insensitive on the light polarization. This is experimentally confirmed by extinction and surface-enhanced Raman-scattering measurements.     

Plasmonic Perfect Absorbers for Biosensing Applications

We present a theoretical modal investigation of plasmonic perfect absorbers (PPAs) based on the localized surface plasmon resonance (LSPR) for biosensing applications. We design the PPA geometry with a layer of periodic metallic nanoparticles on one side of a dielectric substrate and a single metallic layer on the opposite side. The electromagnetic (EM) fields confine partly in the surrounding medium above the substrate and within the substrate itself. We examine the modes of the PPA geometry for a wavelength range of 600–1500 nm. The fundamental mode of the system provides perfect absorption for a wide angle of incidence 0–70°. The second-order mode shows a strong angular dependence with a sharp resonance and exhibits perfect optical absorption when the critical coupling condition for LSPR is achieved. The coupling condition depends on the size, periodicity, dielectric spacer, and the surrounding material of the system. The strong dependence on the surrounding material makes it a promising candidate for biosensing applications. We introduce a novel approach to investigate the angular dependence of the refractive index change for the PPA system. This novel technique contributes the significant attributes of the LSPR sensors, can be used for any required resonance wavelength depending on geometric design, and it also provides sensitivity analogous to the standard surface plasmon resonance (SPR) biosensors.     

Tuning Triangular Prism Dimer into Fano Resonance for Plasmonic Sensor

We theoretically investigate the plasmonic Fano resonance in a triangular nanoprism dimer. By adjusting the geometry parameters, we have observed a Fano line shape in the scattering spectra, which is induced by the competence of bonding and antibonding modes in the triangular nanoprism dimer. The Fano line shape can be well described by a theoretical model of two harmonic oscillators. A figure of merit value as high as 16.1 is achieved in the triangular nanoprism dimer, which is caused by the Fano resonance. The electric field at the corner of the triangular prisms is the highest among the circular cylinder dimer and square rod dimmers, which shows that the triangular prism dimer is more suitable for the detection of biomolecules. The triangular prism dimer may also used in plasmonic circuits.     

Plasmonic Tuning of Photoluminescence from Semiconducting Quantum Dot Assemblies

We report tuning of photoluminescence enhancement and quenching from closed packed monolayers of cadmium selenide quantum dots doped with gold nanoparticles. Plasmon-mediated control of the emission intensity from the monolayers is achieved by varying the size and packing density of the quantum dots as well as the doping concentration of gold nanoparticles. We observe a unique packing density dependent crossover from enhancement to quenching and vice versa for fixed size of quantum dots and doping concentration of gold nanoparticles. We suggest that this behavior is indicative of a crossover from single particle to collective emission from quantum dots mediated by gold nanoparticles.     

Tuning Plasmonic Properties of Truncated Gold Nanospheres by Coating

The influence of TiO₂ coating on resonant properties of gold nanoisland films deposited on silica substrates was studied numerically and in experiments. The model describing plasmonic properties of a metal truncated nanosphere placed on a substrate and covered by a thin dielectric layer has been developed. The model allows calculating a particle polarizability spectrum and, respectively, its surface plasmon resonance (SPR) wavelength for any given cover thickness, particle radius and truncation parameter, and dielectric functions of the particle, the substrate, the coating layer, and the surrounding medium. Dependence of the SPR position calculated for truncated gold nanospheres has coincided with the measured one for the gold nanoisland films covered with titania of different thicknesses. In the experiments, gold films with thickness of 5 nm were deposited on a silica glass substrate, annealed at 500 °C to form nanoislands of 20 nm in diameter, and covered with amorphous titania layers using atomic layer deposition technique. The resulting structures were characterized with scanning electron microscopy and optical absorption spectroscopy. The measured dependence of the SPR position on titania film thickness corresponded to the one calculated for truncated sphere-shaped nanoparticles with the truncation angle of ~50°. We demonstrated the possibility of tuning the SPR position within ~100 nm range by depositing to 30 nm thick titania layer.

     

DNA‐Functionalized Plasmonic Nanomaterials for Optical Biosensing

Plasmonic nanomaterials, especially Au and Ag nanomaterials, have shown attractive physicochemical properties, such as easy functionalization and tunable optical bands. The development of this active subfield paves the way to the fascinating biosensing platforms. In recent years, plasmonic nanomaterials–based sensors have been extensively investigated because they are useful for genetic diseases, biological processes, devices, and cell imaging. In this account, a brief introduction of the development of optical biosensors based on DNA‐functionalized plasmonic nanomaterials is presented. Then the common strategies for the application of the optical sensors are summarized, including colorimetry, fluorescence, localized surface plasmon resonance, and surface‐enhanced resonance scattering detection. The focus is on the fundamental aspect of detection methods, and then a few examples of each method are highlighted. Finally, the opportunities and challenges for the plasmonic nanomaterials–based biosensing are discussed with the development of modern technologies.     

Possible Plasmonic Acceleration of LED Modulation for Li-Fi Applications

Plasmonics - Emerging LED-based wireless visible light communication (Li-Fi) needs faster LED response to secure desirable modulation rates. Decay rate of an emitter can be enhanced by plasmonics,...     

Plasmonic Nanostructures as Accelerators for Nanoparticles: Optical Nanocannon

We suggest a model of an optical structure that allows to accelerate nanoparticles to velocities on the order of tens of centimeters per second using low-intensity external optical fields. The nano-accelerator system employs metallic V-grooves which concentrate the electric field in the vicinity of their bottoms and creates large optical gradient forces for the nanoparticles in that groove. The conditions are found when this optical force tends to eject particles away from the groove.     

Ferroelectric Hybrid Plasmonic Waveguide for All-Optical Logic Gate Applications

A ferroelectric hybrid plasmonic waveguide, made of a polycrystal lithium niobate waveguide separated from a gold film by a silicon dioxide isolation layer, is fabricated by use of laser molecular beam epitaxy growth, electron beam evaporation, and focused ion beam etching. Strong subwavelength mode confinement and excellent long-range propagation are achieved simultaneously for the hybrid plasmonic mode. An all-optical logic OR gate is also realized based on the ferroelectric hybrid plasmonic waveguide. This may provide a way for the study of all-optical logic gates and integrated photonic circuits.     

Controlled In Situ Seed-Mediated Growth of Gold and Silver Nanoparticles on an Optical Fiber Platform for Plasmonic Sensing Applications

Plasmonics - This study presents an in situ growth technique to develop highly sensitive plasmonic fiber optic sensors with an excellent control over the plasmonic properties of gold (AuNPs) and...     

Subwavelength-Sized Plasmonic Structures for Wide-Field Optical Microscopic Imaging with Super-Resolution

We propose a wide-field super-resolved optical microscopic imaging technique based on subwavelength slit arrays embedded in a thin silver film to generate surface plasmon (SP) standing wave interference patterns. These fringes carrying high spatial frequency information serve as excitation profiles to excite the nanoscale fluorescence objects. The super-resolved fluorescence density distribution is reconstructed from a weight sum of a series of fluorescence images with differently phase-shifted SP standing wave illumination. Simulation and experimental results show that the lateral resolution of the reconstructed fluorescence density image is enhanced by 0.28?λ _SP in two dimensions, which is twofold better than that of conventional high numerical aperture fluorescence microscopy. This technique benefits from a grating coupler to offer a simple way for the generation and phase shift of SP standing wave excitation profiles in two dimensions. The flat configuration, wide field, and noninvasive nature make this approach suitable for real-time analyzing the fine details of bio-samples in biochip applications.     

Shape-Controlled Synthesis of Silver Nanoparticles for Plasmonic and Sensing Applications

The localized surface plasmon resonance of a silver nanoparticle is responsible for its ability to strongly absorb and scatter light at specific wavelengths. The absorption and scattering spectra (i.e., plots of cross sections as a function of wavelength) of a particle can be predicted using Mie theory (for a spherical particle) or the discrete dipole approximation method (for particles in arbitrary shapes). In this review, we briefly discuss the calculated spectra for silver nanoparticles with different shapes and the synthetic methods available to produce these nanoparticles. As validated in recent studies, there is good agreement between the theoretically calculated and the experimentally measured spectra. We conclude with a discussion of new plasmonic and sensing applications enabled by the shape-controlled nanoparticles.     

Plasmonic Optical Trapping in Biologically Relevant Media

We present plasmonic optical trapping of micron-sized particles in biologically relevant buffer media with varying ionic strength. The media consist of 3 cell-growth solutions and 2 buffers and are specifically chosen due to their widespread use and applicability to breast-cancer and angiogenesis studies. High-precision rheological measurements on the buffer media reveal that, in all cases excluding the 8.0 pH Stain medium, the fluids exhibit Newtonian behavior, thereby enabling straightforward measurements of optical trap stiffness from power-spectral particle displacement data. Using stiffness as a trapping performance metric, we find that for all media under consideration the plasmonic nanotweezers generate optical forces 3–4x a conventional optical trap. Further, plasmonic trap stiffness values are comparable to those of an identical water-only system, indicating that the performance of a plasmonic nanotweezer is not degraded by the biological media. These results pave the way for future biological applications utilizing plasmonic optical traps.     

D-M-D Plasmonic Anti-Reflector for Next-Generation Thin c-Si Solar Cell Applications

Plasmonics - In this paper, focus is on the light trapping surface in crystalline silicon (c-Si) solar cells where thinner c-Si wafers are expected to be used by industry to reduce the cost of cell...     

Plasmonic Tuning at Mid-Infrared Wavelengths by Composite Arrays of Graphene Ribbons

Plasmonics - This work reports on a numerical simulation study regarding the systematic tuning of plasmonic resonance wavelength in the mid-infrared regime, by using composite arrays of graphene...     

Near-Field Optical Analysis of Plasmonic Nano-Probes for Top-Illumination Tip-Enhanced Raman Scattering

Top-illumination tip-enhanced Raman scattering (TI-TERS) has recently emerged as a promising near-field vibrational spectroscopy method that can be adapted on an upright optical microscope. With a relatively simplified optics, TI-TERS can probe both opaque and transparent samples making them a promising tool in nanoscale chemical analysis. One of the critical components of TI-TERS is the plasmonic nano-tip used to enhance the Raman spectroscopic signature. Herein, we numerically studied the near-field optical properties of conventional gold tip (20 nm radius of curvature) and two varieties of optical antenna-based tips in the context of TI-TERS. Optical antenna-based tips included a 40-nm gold nanoparticle attached to a dielectric tip and a 50-nm equilateral gold nanotriangle attached to a dielectric tip. We evaluated the Raman enhancement spectra as a function of experimental variables such as underlying substrate and angle of the tip with respect to substrate normal. Our analysis revealed that conventional gold tip facilitates superior enhancement and optical antenna-based tips facilitate superior spectral bandwidth and lateral resolution in TI-TERS configuration. Tips with higher enhancement can be harnessed for ultra-sensitive measurements, and tips with broader spectral bandwidth can be utilized to enhance both Stokes and anti-Stokes component of the Raman spectra.     

A Three-Dimensional Plasmonic Nanostructure with Extraordinary Optical Transmission

We report a 3D plasmonic nanostructure having an extraordinary optical transmission due to localized surface plasmon (LSP) coupling between nanoholes and nanodisks. The nanostructure contains a free-standing gold nanohole array (NHA) film above a cavity and an array of nanodisks at the bottom of the cavity that is aligned with the NHA. For the device, the LSP-mediated resonance position was dependent on the hole and nanodisk diameter as well as the separation distance. Also, the effect of LSP coupling between each hole and corresponding nanodisk became negligible for cavities deeper than 200 nm as observed as a disappearance of the LSP resonance. The greatest LSP resonance transmission and the highest electric field intensity were observed for the structure with the shallowest cavity. In addition, the structure had high surface plasmon resonance sensitivity and may have potential for surface-enhanced Raman spectroscopy and optical trapping applications.