Microfluidic accumulation assay probes attachment of biofilm forming diatom cells

Testing of fouling release (FR) technologies is of great relevance for discovery of the next generation of protective marine coatings. In this paper, an accumulation assay to test diatom interaction under laminar flow with the model organism Navicula perminuta is introduced. Using time lapse microscopy with large area sampling allows determination of the accumulation kinetics of the diatom on three model surfaces with different surface properties at different wall shear stresses. The hydrodynamic conditions within the flow cell are described and a suitable shear stress range to perform accumulation experiments is identified at which statistically significant discrimination of surfaces is possible. The observed trends compare well to published adhesion preferences of N. perminuta. Also, previously determined trends of critical wall shear stresses required for cell removal from the same set of functionalized interfaces shows consistent trends. Initial attachment mediated by extracellular polymeric substances (EPS) present outside the diatoms leads to the conclusion that the FR potential of the tested coating candidates can be deducted from dynamic accumulation experiments under well-defined hydrodynamic conditions. As well as testing new coating candidates for their FR properties, monitoring of the adhesion process under flow provides additional information on the mechanism and geometry of attachment and the population kinetics.     

Molecular dynamics of the transition from L-selectin- to beta 2-integrin-dependent neutrophil adhesion under defined hydrodynamic shear.

Homotypic adhesion o2 neutrophils stimulated with chemoattractant is analogous to capture on vascular endothelium in that both processes depend on L-selectin and beta 2-integrin adhesion receptors. Under hydrodynamic shear, cell adhesion requires that receptors bind sufficient ligand over the duration of intercellular contact to withstand hydrodynamic stresses. Using cone-plate viscometry to apply a uniform linear shear field to suspensions of neutrophils, we conducted a detailed examination of the effect of shear rate and shear stress on the kinetics of cell aggregation. A collisional analysis based on Smoluchowski's flocculation theory was employed to fit the kinetics of aggregation with an adhesion efficiency. Adhesion efficiency increased with shear rate from approximately 20% at 100 s-1 to approximately 80% at 400 s-1. The increase in adhesion efficiency. Adhesion efficiency increased with shear rate from approximately 20% at 100 s-1 to approximately 80% at 400 s-1. The increase in adhesion efficiency with shear was dependent on L-selectin, and peak efficiency was maintained over a relatively narrow range of shear rates (400-800 s-1) and shear stresses (4-7 dyn/cm2). When L-selectin was blocked with antibody, beta 2-integrin (CD11a, b) supported adhesion at low shear rates (< 400 s-1). The binding kinetics of selectin and integrin appear to be optimized to function within discrete ranges of shear rate and stress, providing an intrinsic mechanism for the transition from neutrophil tethering to stable adhesion.     

Shear stress increases the residence time of adhesion of Pseudomonas aeruginosa

Although ubiquitous, the processes by which bacteria colonize surfaces remain poorly understood. Here we report results for the influence of the wall shear stress on the early-stage adhesion of Pseudomonas aeruginosa PA14 on glass and polydimethylsiloxane surfaces. We use image analysis to measure the residence time of each adhering bacterium under flow. Our main finding is that, on either surface, the characteristic residence time of bacteria increases approximately linearly as the shear stress increases (∼0–3.5 Pa). To investigate this phenomenon, we used mutant strains defective in surface organelles (type I pili, type IV pili, or the flagellum) or extracellular matrix production. Our results show that, although these bacterial surface features influence the frequency of adhesion events and the early-stage detachment probability, none of them is responsible for the trend in the shear-enhanced adhesion time. These observations bring what we believe are new insights into the mechanism of bacterial attachment in shear flows, and suggest a role for other intrinsic features of the cell surface, or a dynamic cell response to shear stress.     

Impact of oleic acid (cis-9-octadecenoic acid) on bacterial viability and biofilm production in Staphylococcus aureus

Staphylococcus aureus is responsible for a broad variety of chronic infections. Most S. aureus clinical isolates show the capacity to adhere to abiotic surfaces and to develop biofilms. Because S. aureus growing in a biofilm is highly refractory to treatment, inhibition of biofilm formation represents a major therapeutic objective. We evaluated the effects of oleic acid on primary adhesion and biofilm production in eight genotypically different S. aureus strains as well as in the biofilm-negative Staphylococcus carnosus strain TM300. Oleic acid inhibited primary adhesion but increased biofilm production in every S. aureus strain tested. Staphylococcus aureus strain UAMS-1 was then selected as a model organism for studying the mechanisms triggered by oleic acid on the formation of a biofilm in vitro. Oleic acid inhibited the primary adhesion of UAMS-1 dose dependently with an IC(50) around 0.016%. The adherent bacterial population decreased proportionally with increasing concentrations of oleic acid whereas an opposite effect was observed on the planktonic population. Overall, the total bacterial counts remained stable. Macroscopic detachments and clumps were visible from the adherent bacterial population. In the presence of oleic acid, the expression of sigB, a gene potentially involved in bacterial survival through an effect on fatty acid composition, was not induced. Our results suggest a natural protective effect of oleic acid against primary adhesion.     

Influence of substrate stiffness on circulating progenitor cell fate

In situ vascular tissue engineering (TE) aims at regenerating vessels using implanted synthetic scaffolds. An envisioned strategy is to capture and differentiate progenitor cells from the bloodstream into the porous scaffold to initiate tissue formation. Among these cells are the endothelial colonies forming cells (ECFCs) that can differentiate into endothelial cells and transdifferentiate into smooth muscle cells under biochemical stimulation. The influence of mechanical stimulation is unknown, but relevant for in situ vascular TE because the cells perceive a change in mechanical environment when captured inside the scaffold, where they are shielded from blood flow induced shear stresses. Here we investigate the effects of substrate stiffness as one of the environmental mechanical cues to control ECFC fate within scaffolds. ECFCs were seeded on soft (3.58±0.90 kPa), intermediate (21.59±2.91 kPa), and stiff (93.75±18.36 kPa) fibronectin-coated polyacrylamide gels, as well as on glass controls, and compared to peripheral blood mononuclear cells (PBMC). Cell behavior was analyzed in terms of adhesion (vinculin staining), proliferation (BrdU), phenotype (CD31, αSMA staining, and flow cytometry), and collagen production (col I, III, and IV). While ECFCs adhesion and proliferation increased with substrate stiffness, no change in phenotype was observed. The cells produced no collagen type I, but abundant amounts of collagen type III and IV, albeit in a stiffness-dependent organization. PBMCs did not adhere to the gels, but they did adhere to glass, where they expressed CD31 and collagen type III. Addition mechanical cues, such as cyclic strains, should be studied to further investigate the effect of the mechanical environment on captured circulating cells for in situ TE purposes.     

Adhesion properties of mutants of Staphylococcus aureus defective in fibronectin-binding proteins and studies on the expression of fnb genes

Staphylococcus aureus 8325-4 has the potential to express two distinct cell wall-associated fibronectin-binding proteins called FnBPA and FnBPB. In order to test if both proteins are expressed in S. aureus and if both are required for promoting bacterial adhesion to fibronectin-coated surfaces, insertion mutations were isolated in each gene. A DNA fragment encoding tetracycline resistance was inserted into fnbA and a fragment encoding erythromycin resistance was inserted into fnbB . A double fnbA fnbB mutant was also constructed. The fnbA and fnbB single mutants showed no significant reduction in their adhesion to polymethylmethacrylate coverslips that had been coated in vitro with fibronectin. However, the double mutant was completely defective in adhesion. Monospecific antibodies directed against the non-conserved N-terminal regions of both proteins confirmed the lack of expression of FnBPs in the mutant strains. Wild-type fnbA and fnbB genes cloned seperately on a multicopy plasmid were each able to restore fully the adhesion-defective phenotype of the 8325-4 fnbA fnbB mutant. This demonstrates that both fnb genes are expressed in S. aureus and that both contribute to the ability of strain 8325-4 to adhere to fibronectin-coated surfaces. The double mutant was also defective in adhesion to coverslips that had been removed from tissue cages implanted subcutaneously in guinea-pigs, which suggests that fibronectin is important in promoting attachment of S. aureus to biomaterial in vivo .     

Interaction of skeletal muscle cells with collagen type IV is mediated by perlecan associated with the cell surface

We have previously shown that the expression of perlecan, a heparan sulfate proteoglycan localized on the myoblast surface, is down-regulated during terminal differentiation of skeletal muscle myoblasts (Larraín et al. [1997] Exp. Cell Res. 234:405-412). In this study, we have evaluated the biochemical characteristics of perlecan, its association with the myoblast surface, and its involvement in C(2)C(12) myoblast adhesion to different substrates. Perlecan associated with myoblasts was solubilized by Triton X-100, whereas heparin, high salt, and RGD peptides were unable to solubilize perlecan. Pre-incubation of myoblasts with [(35)S]-Na(2)SO(4), followed by solubilization with Triton X-100 and immunoprecipitation with antibodies against murine perlecan, demonstrated that this proteoglycan present on the cell surface has a heterogeneous size profile with a K(av) value of 0.45, determined by Sepharose CL-4B chromatography. Myoblasts were found to adhere with decreasing affinities to collagen type IV, type I, laminin, fibronectin, perlecan, and matrigel. We found that cell adhesion to collagen type IV was inhibited by blocking this substrate with exogenous perlecan prior to cell plating, whereas no effect was observed for laminin. Furthermore, adhesion of myoblasts to collagen type IV was inhibited by the perlecan core protein obtained by treatment of perlecan with heparitinase, as well as by pre-incubation of the cells with antibodies against murine perlecan. These data support the idea that skeletal muscle cells interact with collagen type IV through the perlecan core protein present on the surface of undifferentiated myoblasts.     

In Vitro and In Vivo Model to Study Bacterial Adhesion to the Vessel Wall Under Flow Conditions

In order to cause endovascular infections and infective endocarditis, bacteria need to be able to adhere to the vessel wall while being exposed to the shear stress of flowing blood.To identify the bacterial and host factors that contribute to vascular adhesion of microorganisms, appropriate models that study these interactions under physiological shear conditions are needed. Here, we describe an in vitro flow chamber model that allows to investigate bacterial adhesion to different components of the extracellular matrix or to endothelial cells, and an intravital microscopy model that was developed to directly visualize the initial adhesion of bacteria to the splanchnic circulation in vivo. These methods can be used to identify the bacterial and host factors required for the adhesion of bacteria under flow. We illustrate the relevance of shear stress and the role of von Willebrand factor for the adhesion of Staphylococcus aureus using both the in vitro and in vivo model.     

Collagen binding by the mannose receptor mediated through the fibronectin type II domain

The macrophage mannose receptor is the prototype for a family of receptors each having an extracellular region consisting of an N-terminal cysteine-rich domain related to the R-type carbohydrate-recognition domain of ricin, a fibronectin type II domain and eight to ten domains related to C-type carbohydrate-recognition domains. The mannose receptor acts as a molecular scavenger, clearing harmful glycoconjugates or micro-organisms through recognition of their defining carbohydrate structures. Cell-adhesion assays, as well as collagen-binding assays, have now been used to show that the mannose receptor can also bind collagen and that the fibronectin type II domain mediates this activity. Neither of the two types of sugar-binding domain in the receptor is involved in collagen binding. Fibroblasts expressing the mannose receptor adhere to type I, type III and type IV collagens, but not to type V collagen, and the adherence is inhibited by isolated mannose receptor fibronectin type II domain. The fibronectin type II domain shows the same specificity for collagen as the whole receptor, binding to type I, type III and type IV collagens. This is the first activity assigned to the fibronectin type II domain of the mannose receptor. The results suggest additional roles for this multifunctional receptor in mediating collagen clearance or cell-matrix adhesion.     

肝癌细胞-胞外基质粘附性与粘附识别序列的相关性

以微管吸吮技术研究了人肝癌细胞在ＩＶ型胶原／层粘连蛋白（ＬＮ）／纤维连结蛋白（ＦＮ）裱衬表面的粘附性。进一步,用四种人工合成肽精－甘－天冬－丝（ＲＧＤＳ）、甘－精－甘－天冬－苏－脯ＧＲＧＤＴＰ）、酪－异亮－甘－丝－精（ＹＩＧＳＲ０和半胱－天冬－脯－甘－酪－异亮－甘－丝－精（ＣＤＰＧＹＩＧＳＲ）研究了肝癌细胞粘附性对两种粘附识别序列ＲＧＤ和ＹＩＧＳＲ的依赖性。为了归纳和整理实验结果,根据竞争性抑制的     

Local hemodynamics affect monocytic cell adhesion to a three-dimensional flow model coated with E-selectin.

Monocyte adhesion to the endothelium depends on concentrations of receptors/ligands, local concentrations of chemoattractants, monocyte transport to the endothelial surface and hemodynamic forces. Monocyte adhesion to the inert surface of a three-dimensional perfusion model was shown to correlate inversely with wall shear stress, but was also affected by flow patterns which influenced the near-wall cell availability. We hypothesized that (a) under the same flow conditions, insolubilized E-selectin on the model's surface may mediate adhesive interactions at higher wall shear stresses, compared to an uncoated model, and (b) pulsatile flow may modify the adhesion profile obtained under steady flow. An axisymmetric flow model with a stenosis and a sudden expansion produced a range of wall shear stresses and a separated flow with recirculation and reattachment. Pre-activated U937 cells were perfused through the model under either steady (Re = 100, 140) or pulsatile (Remean = 107) flow. The velocity field was characterized through computational fluid dynamics and validated by inert particle tracking. Surface E-selectin greatly increased cell adhesion in all regions at Re = 100 and 140, compared to an uncoated model under the same flow conditions. In regions where the cells near the wall were abundant (taper and stenosis), adhesion to E-selectin correlated with the reciprocal of local wall shear stress when flow was steady. Pulsatile flow distributed the adherent cells more evenly throughout the coated model. Hence, characterizing both the local hemodynamics and the biological activity on the vessel wall is important in leukocyte adhesion.     

Is the GehD lipase from Staphylococcus epidermidis a collagen binding adhesin?

The opportunistic human pathogen Staphylococcus epidermidis is the major cause of nosocomial biomaterial infections. S. epidermidis has the ability to attach to indwelling materials coated with extracellular matrix proteins such as fibrinogen, fibronectin, vitronectin, and collagen. To identify the proteins necessary for S. epidermidis attachment to collagen, we screened an expression library using digoxigenin-labeled collagen as well as two monoclonal antibodies generated against the Staphylococcus aureus collagen-adhesin, Cna, as probes. These monoclonal antibodies recognize collagen binding epitopes on the surface of S. aureus and S. epidermidis cells. Using this approach, we identified GehD, the extracellular lipase originally found in S. epidermidis 9, as a collagen-binding protein. Despite the monoclonal antibody cross-reactivity, the GehD amino acid sequence and predicted structure are radically different from those of Cna. The mature GehD circular dichroism spectra differs from that of Cna but strongly resembles that of a mammalian cell-surface collagen binding receptor, known as the alpha(1) integrin I domain, suggesting that they have similar secondary structures. The GehD protein is translated as a preproenzyme, secreted, and post-translationally processed into mature lipase. GehD does not have the conserved LPXTG C-terminal motif present in cell wall-anchored proteins, but it can be detected in lysostaphin cell wall extracts. A recombinant version of mature GehD binds to collagens type I, II, and IV adsorbed onto microtiter plates in a dose-dependent saturable manner. Recombinant, mature GehD protein and anti-GehD antibodies can inhibit the attachment of S. epidermidis to immobilized collagen. These results provide evidence that GehD may be a bi-functional molecule, acting not only as a lipase but also as a cell surface-associated collagen adhesin.     

Amino acid residue Ala-62 in the FimH fimbrial adhesin is critical for the adhesiveness of meningitis-associated Escherichia coli to collagens

Adhesion of meningitis-associated Escherichia coli O18acK1H7 to collagens was characterized. The E. coli strain IHE 3034 adhered to type IV and type I collagens but not to type III collagen immobilized on glass. Collagens lack terminal mannosyl units, yet the bacterial adhesion was completely abolished in the presence of alpha-methyl-D-mannoside. A cat cassette was introduced into the filmA gene of IHE 3034, and the resulting mutant strain IHE 3034-2 failed to adhere to collagens. In contrast, insertion of a Gm cassette into the sfaA gene of IHE 3034, encoding the S-fimbrillin, had no significant effect on the adhesiveness. The fim cluster from IHE 3034 was cloned and expressed in trans in the fimA::cat mutant strain IHE 3034-2. The complemented strain IHE 3034-2(pRPO-1) exhibited adhesiveness to type IV and type I collagens, confirming the function of the type 1 fimbria in the adhesion. We have previously shown that the type 1 fimbria from E. coli K-12 strain PC31 does not confer bacterial adhesiveness to collagens. The fimH genes from E. coli IHE 3034 as well as from PC31 were expressed in the fimH-null strain MS4. The FimH from IHE 3034 potentiated collagen adherence, whereas the FimH from PC31 was inactive. Sequence comparison of fimH from IHE 3034 and PC31 revealed five amino-acid differences in the predicted mature FimH proteins: at residues 27, 62, 70, 78 and 201. Each of these residues in the IHE 3034-FimH were individually substituted to the corresponding amino acid in the PC31-FimH. The substitution S62-->A completely abolished collagen adhesiveness. The reverse substitution A62-->S in the PC31-FimH as well as in the FimH from another E. coli strain induced collagen adhesiveness to the level seen with IHE 3034-FimH. Out of nine fimH genes analysed from isolates of E. coli, collagen adhesiveness as well as alanine at position 62 in FimH were found only in two O18acK1H7 isolates with the isoenzyme profile ET type 1. Our results demonstrate that the amino-acid residue Ala-62 in the FimH lectin is critical for the adhesion to collagens by a highly virulent clonal group of E. coli.     

The membrane glycoprotein Ia-IIa (VLA-2) complex mediates the Mg++- dependent adhesion of platelets to collagen

We have purified the platelet membrane glycoprotein Ia-IIa complex by detergent solubilization and sequential affinity chromatography on Concanavalin A-Sepharose and collagen-Sepharose. The complex, which is identical to the VLA-2 complex of lymphocytes and other cells and contains subunits of 160 and 130 kD on SDS-PAGE, was labeled with 125I and incorporated into phosphatidyl choline liposomes. The liposomes, like intact platelets, adhered to collagenous substrates in an Mg++-dependent manner with a K'a(Mg++) of 3.5 mM. Little adhesion of the liposomes to collagen occurred when Mg++ was replaced by Ca++ or EDTA. Calcium ions inhibited the Mg++-dependent adhesion with a K'i(Ca++) of 5.5 mM. Liposomes containing the Ia-IIa complex adhered to substrates composed of types I, II, III, and IV collagen, but did not effectively adhere to substrates composed of type V collagen or gelatin. Adhesion to collagen was specific. The liposomes did not adhere to fibronectin, vitronectin, laminin, thrombospondin, fibrinogen, or von Willebrand factor substrates. The monoclonal antibody P1H5, which specifically immunoprecipitated the Ia-IIa complex, also specifically inhibited the Mg++-dependent adhesion of both platelets and Ia-IIa-containing liposomes to collagen substrates. These findings provide additional evidence that the platelet membrane Ia-IIa complex is the mediator of Mg++-dependent platelet adhesion to collagen and suggest that the VLA-2 complex may also function as an Mg++-dependent collagen receptor in other cells.     

Collagen Binding of Bifidobacterium adolescentis

In this study, 13 bifidobacterial strains were tested for their ability to adhere to immobilized extracellular matrix (ECM) proteins. Only two Bifidobacterium adolescentis strains adhered to immobilized type I and type V collagens, but not to laminin, fibronectin, and type III and IV collagens. The adhesion of B. adolescentis BB-119 to type V collagen was inhibited by type I and V collagens and gelatin, and was diminished after protease treatment of the cells. Periodate treatment of immobilized collagen and the presence of galactose inhibited the adhesion of strain BB-119 to type V collagen. Two cell surface proteins with molecular masses of 36 kDa and 52 kDa from strain BB-119 were found to bind to horseradish peroxidase-conjugated type V collagen by ligand blotting. We concluded that B. adolescentis BB-119 binds to type V collagen at galactose chains as target via these two cell surface proteins by their lectin-like activity. Received: 15 October 1996 / Accepted: 20 November 1996     

Identification and Characterization of an Antigen I/II Homologous Gene, pah, from Streptococcus downei

Antigen I/II of Streptococcus mutans is a cell surface protein involved in the adherence of cells to tooth surfaces. In this study, an antigen I/II homologous gene, pah, was identified and sequenced from Streptococcus downei MFe28 using degenerate polymerase chain reaction (PCR) and the gene-walking method. The pah gene encodes a cell-wall-anchoring protein, PAh, containing 1565 amino acids. At the deduced amino acid sequence level, PAh shows a strong similarity to PAg of S. sobrinus (97.6% identity). Southern hybridization analysis indicated that a single copy of the pah gene was preserved in the chromosomal DNA of S. downei. Two pah mutants, SES-1 and SES-2, were constructed and analyzed by Western blotting. Two bands corresponding to 200- and 160-kDa proteins were observed in the parent strain, whereas no band was detected in pah mutant strains. In an adhesion assay of cells, pah mutants failed to adhere to tube surfaces in contrast to the parent strain. Furthermore, saliva-induced aggregation was decreased in pah mutants compared to the parent strain. Together, PAh is associated with the adhesion of cells to abiotic surfaces and whole saliva.     

Identification of multiple cell adhesion receptors for collagen and fibronectin in human fibrosarcoma cells possessing unique alpha and common beta subunits

Using monoclonal antibody technology and affinity chromatography we have identified four distinct classes of cell surface receptors for native collagen on a cultured human fibrosarcoma cell line, HT-1080. Two classes of monoclonal antibodies prepared against HT-1080 cells inhibited adhesion to extracellular matrix components. Class I antibodies inhibited cell adhesion to collagen, fibronectin, and laminin. These antibodies immunoprecipitated two noncovalently linked proteins (subunits) with molecular masses of 147 and 125 kD, termed alpha and beta, respectively. Class II antibodies inhibited cell adhesion to native collagen only and not fibronectin or laminin. Class II antibodies immunoprecipitated a single cell surface protein containing two noncovalently linked subunits with molecular masses of 145 and 125 kD, termed alpha and beta, respectively. The two classes of antibodies did not cross-react with the same cell surface protein and recognized epitopes present on the alpha subunits. Pulse-chase labeling studies with [35S]methionine indicated that neither class I nor II antigen was a metabolic precursor of the other. Comparison of the alpha and beta subunits of the class I and II antigens by peptide mapping indicated that the beta subunits were identical while the alpha subunits were distinct. In affinity chromatography experiments HT-1080 cells were extracted with Triton X-100 or octylglucoside detergents and chromatographed on insoluble fibronectin or native type I or VI collagens. A single membrane protein with the biochemical characteristics of the class I antigen was isolated on fibronectin-Sepharose and could be immunoprecipitated with the class I monoclonal antibody. The class I antigen also specifically bound to type I and VI collagens, consistent with the observation that the class I antibodies inhibit cell adhesion to types VI and I collagen and fibronectin. The class II antigen, however, did not bind to collagen (or fibronectin) even though class II monoclonal antibodies completely inhibited adhesion of HT-1080 cells to types I and III-VI collagen. The class I beta and II beta subunits were structurally related to the beta subunit of the fibronectin receptor described by others. However, none of these receptors shared the same alpha subunits. Additional membrane glycoprotein(s) with molecular mass ranges of 80-90 and 35-45 kD, termed the class III and IV receptors, respectively, bound to types I and VI collagen but not to fibronectin. Monoclonal antibodies prepared against the class III receptor had no consistent effect on cell attachment or spreading, suggesting that it is not directly involved in adhesion to collagen-coated substrates.(ABSTRACT TRUNCATED AT 400 WORDS)     

The alpha 2 beta 1 integrin cell surface collagen receptor binds to the alpha 1 (I)-CB3 peptide of collagen

We have previously shown that platelets adhere to collagen substrates via a Mg2(+)-dependent mechanism mediated by the surface glycoprotein Ia-IIa (human leukocyte very late activation protein 2, alpha 2 beta 1 integrin) complex. The adhesion is specific for collagen and is supported by collagen types I, II, III, IV, and VI. Several other members of the integrin family of adhesive protein receptors recognize discrete linear amino acid sequences within their adhesive glycoprotein ligands. Experiments with both intact platelets and with liposomes containing the purified receptor complex indicated that the alpha 2 beta 1 receptor recognized denatured type I collagen in a Mg2(+)-dependent manner. To further localize the binding site, the alpha 1 and alpha 2 chains of type I collagen were purified by gel filtration and ion exchange chromatography and tested as adhesive substrates. Both the alpha 1(I) and alpha 2(I) chains effectively supported Mg2(+)-dependent platelet adhesion. The purified alpha 1(I) collagen chain was then subjected to cleavage with cyanogen bromide, and the resultant peptides were separated by chromatography on carboxymethylcellulose. Only the alpha 1(I)-CB3 fragment supported Mg2(+)-dependent platelet adhesion. The monoclonal antibody P1H5 which recognizes an epitope on the alpha 2 subunit of the integrin receptor and which inhibits the adhesion of both intact platelets and liposomes bearing the purified receptor to collagen also inhibited platelet adhesion to the alpha 1(I)-CB3 fragment. These results indicate that the alpha 2 beta 1 receptor recognizes a sequence of amino acids present in the alpha 1(I)-CB3 fragment of type I collagen. An identical or similar sequence likely mediates binding of the receptor to other collagen polypeptides.     

Novel experimental study of receptor-mediated bacterial adhesion under the influence of fluid shear

Dynamic adhesion of cells to surfaces is a vital step in a variety of biochemical and physiological phenomena. Bacterial adhesion is responsible not only for problems associated with biofouling and biofilm formation in the biochemical industry but also in the initiation of certain infectious diseases. In this study, we report the effect of critical parameters, such as receptor and ligand densities and shear rate, on receptor-mediated dynamic bacterial adhesion. Adhesion of a pathogenic strain of Staphylococcus aureus to immobilized collagen was studied. The receptor density on the cell surface was varied by harvesting cells at different growth times and was quantified using flow cytometry. Dynamic adhesion experiments were conducted over a range of physiologically relevant shear rates (50 to 1500 s(-1)) using a parallel-plate flow chamber. Video microscopy coupled with digital image processing was employed to quantify adhesion. A semiquantitative comparison between experimental results and theoretical data obtained using a previously proposed mathematical model was also performed. The results suggest that dynamic adhesion is dependent on receptor density and shear rate, but independent of ligand density. This report demonstrates the feasibility of using bacteria to study fundamental aspects of receptor-mediated dynamic adhesion.     

Lack of correlation between fibrils, hydrophobicity and adhesion for strains of Streptococcus sanguis biotypes I and II

Fifteen strains of Streptococcus sanguis biotype I and eight strains of Streptococcus sanguis biotype II with peritrichous fibrils, tufts of fibrils or a mixture of fibrils and fimbriae on the cell surface, were tested for their ability to adhere to saliva coated spheroidal hydroxyapatite (S-SHA) in a radiolabelled assay. S. sanguis I strains adhered better than S. sanguis II strains and peritrichously fibrillar strains generally adhered better than tufted strains. There was no correlation between the density of fibrillation and adhesion. The only highly adherent strain of S. sanguis II carried fimbriae in addition to fibrils. No correlation was observed between cell surface hydrophobicity as measured by phase partitioning with hexadecane and adhesion to S-SHA.