Optimal DNA pooling-based two-stage designs in case-control association studies

Study cost remains the major limiting factor for genome-wide association studies due to the necessity of genotyping a large number of SNPs for a large number of subjects. Both DNA pooling strategies and two-stage designs have been proposed to reduce genotyping costs. In this study, we propose a cost-effective, two-stage approach with a DNA pooling strategy. During stage I, all markers are evaluated on a subset of individuals using DNA pooling. The most promising set of markers is then evaluated with individual genotyping for all individuals during stage II. The goal is to determine the optimal parameters (pi(p)(sample ), the proportion of samples used during stage I with DNA pooling; and pi(p)(marker ), the proportion of markers evaluated during stage II with individual genotyping) that minimize the cost of a two-stage DNA pooling design while maintaining a desired overall significance level and achieving a level of power similar to that of a one-stage individual genotyping design. We considered the effects of three factors on optimal two-stage DNA pooling designs. Our results suggest that, under most scenarios considered, the optimal two-stage DNA pooling design may be much more cost-effective than the optimal two-stage individual genotyping design, which use individual genotyping during both stages.     

Two-stage designs in case-control association analysis

DNA pooling is a cost-effective approach for collecting information on marker allele frequency in genetic studies. It is often suggested as a screening tool to identify a subset of candidate markers from a very large number of markers to be followed up by more accurate and informative individual genotyping. In this article, we investigate several statistical properties and design issues related to this two-stage design, including the selection of the candidate markers for second-stage analysis, statistical power of this design, and the probability that truly disease-associated markers are ranked among the top after second-stage analysis. We have derived analytical results on the proportion of markers to be selected for second-stage analysis. For example, to detect disease-associated markers with an allele frequency difference of 0.05 between the cases and controls through an initial sample of 1000 cases and 1000 controls, our results suggest that when the measurement errors are small (0.005), approximately 3% of the markers should be selected. For the statistical power to identify disease-associated markers, we find that the measurement errors associated with DNA pooling have little effect on its power. This is in contrast to the one-stage pooling scheme where measurement errors may have large effect on statistical power. As for the probability that the disease-associated markers are ranked among the top in the second stage, we show that there is a high probability that at least one disease-associated marker is ranked among the top when the allele frequency differences between the cases and controls are not <0.05 for reasonably large sample sizes, even though the errors associated with DNA pooling in the first stage are not small. Therefore, the two-stage design with DNA pooling as a screening tool offers an efficient strategy in genomewide association studies, even when the measurement errors associated with DNA pooling are nonnegligible. For any disease model, we find that all the statistical results essentially depend on the population allele frequency and the allele frequency differences between the cases and controls at the disease-associated markers. The general conclusions hold whether the second stage uses an entirely independent sample or includes both the samples used in the first stage and an independent set of samples.     

Statistical tests of genetic association for case-control study designs

The central theme in case-control genetic association studies is to efficiently identify genetic markers associated with trait status. Powerful statistical methods are critical to accomplishing this goal. A popular method is the omnibus Pearson's chi-square test applied to genotype counts. To achieve increased power, tests based on an assumed trait model have been proposed. However, they are not robust to model misspecification. Much research has been carried out on enhancing robustness of such model-based tests. An analysis framework that tests the equality of allele frequency while allowing for different deviation from Hardy-Weinberg equilibrium (HWE) between cases and controls is proposed. The proposed method does not require specification of trait models nor HWE. It involves only 1 degree of freedom. The likelihood ratio statistic, score statistic, and Wald statistic associated with this framework are introduced. Their performance is evaluated by extensive computer simulation in comparison with existing methods.     

PedGenie: meta genetic association testing in mixed family and case-control designs

Background

With the increased availability of high throughput data, such as DNA microarray data, researchers are capable of producing large amounts of biological data. During the analysis of such data often there is the need to further explore the similarity of genes not only with respect to their expression, but also with respect to their functional annotation which can be obtained from Gene Ontology (GO).

Results

We present the freely available software package GOSim, which allows to calculate the functional similarity of genes based on various information theoretic similarity concepts for GO terms. GOSim extends existing tools by providing additional lately developed functional similarity measures for genes. These can e.g. be used to cluster genes according to their biological function. Vice versa, they can also be used to evaluate the homogeneity of a given grouping of genes with respect to their GO annotation. GOSim hence provides the researcher with a flexible and powerful tool to combine knowledge stored in GO with experimental data. It can be seen as complementary to other tools that, for instance, search for significantly overrepresented GO terms within a given group of genes.

Conclusion

GOSim is implemented as a package for the statistical computing environment R and is distributed under GPL within the CRAN project.     

Three lectures on case-control genetic association analysis

The purpose of this review is to focus on the three most important themes in genetic association studies using randomly selected patients (case, affected) and normal samples (control, unaffected), so that students and researchers alike who are new to this field may quickly grasp the key issues and command basic analysis methods. These three themes are: elementary categorical analysis; disease mutation as an unobserved entity; and the importance of homogeneity in genetic association analysis.     

Robust joint analysis allowing for model uncertainty in two-stage genetic association studies

Background  

The cost efficient two-stage design is often used in genome-wide association studies (GWASs) in searching for genetic loci underlying the susceptibility for complex diseases. Replication-based analysis, which considers data from each stage separately, often suffers from loss of efficiency. Joint test that combines data from both stages has been proposed and widely used to improve efficiency. However, existing joint analyses are based on test statistics derived under an assumed genetic model, and thus might not have robust performance when the assumed genetic model is not appropriate.     

Family-based versus unrelated case-control designs for genetic associations

The most simple and commonly used approach for genetic associations is the case-control study design of unrelated people. This design is susceptible to population stratification. This problem is obviated in family-based studies, but it is usually difficult to accumulate large enough samples of well-characterized families. We addressed empirically whether the two designs give similar estimates of association in 93 investigations where both unrelated case-control and family-based designs had been employed. Estimated odds ratios differed beyond chance between the two designs in only four instances (4%). The summary relative odds ratio (ROR) (the ratio of odds ratios obtained from unrelated case-control and family-based studies) was close to unity (0.96 [95% confidence interval, 0.91-1.01]). There was no heterogeneity in the ROR across studies (amount of heterogeneity beyond chance I(2) = 0%). Differences on whether results were nominally statistically significant (p < 0.05) or not with the two designs were common (opposite classification rates 14% and 17%); this reflected largely differences in power. Conclusions were largely similar in diverse subgroup analyses. Unrelated case-control and family-based designs give overall similar estimates of association. We cannot rule out rare large biases or common small biases.     

Genome association studies of complex diseases by case-control designs

One way to perform linkage-disequilibrium (LD) mapping of genetic traits is to use single markers. Since dense marker maps-such as single-nucleotide polymorphism and high-resolution microsatellite maps-are available, it is natural and practical to generalize single-marker LD mapping to high-resolution haplotype or multiple-marker LD mapping. This article investigates high-resolution LD-mapping methods, for complex diseases, based on haplotype maps or microsatellite marker maps. The objective is to explore test statistics that combine information from haplotype blocks or multiple markers. Based on two coding methods, genotype coding and haplotype coding, Hotelling's T2 statistics TG and TH are proposed to test the association between a disease locus and two haplotype blocks or two markers. The validity of the two T2 statistics is proved by theoretical calculations. A statistic TC, an extension of the traditional chi2 method of comparing haplotype frequencies, is introduced by simply adding the chi2 test statistics of the two haplotype blocks together. The merit of the three methods is explored by calculation and comparison of power and of type I errors. In the presence of LD between the two blocks, the type I error of TC is higher than that of TH and TG, since TC ignores the correlation between the two blocks. For each of the three statistics, the power of using two haplotype blocks is higher than that of using only one haplotype block. By power comparison, we notice that TC has higher power than that of TH, and TH has higher power than that of TG. In the absence of LD between the two blocks, the power of TC is similar to that of TH and higher than that of TG. Hence, we advocate use of TH in the data analysis. In the presence of LD between the two blocks, TH takes into account the correlation between the two haplotype blocks and has a lower type I error and higher power than TG. Besides, the feasibility of the methods is shown by sample-size calculation.     

Adaptive two-stage designs for single-arm phase IIA cancer clinical trials

The main purpose of a phase IIA trial of a new anticancer therapy is to determine whether the therapy has sufficient promise against a specific type of tumor to warrant its further development. The therapy will be rejected for further investigation if the true response rate is less than some uninteresting level and the test of hypothesis is powered at a specific target response rate. Two-stage designs are commonly used for this situation. However, in many situations investigators often express concern about uncertainty in targeting the alternative hypothesis to study power at the planning stage. In this article, motivated by a real example, we propose a strategy for adaptive two-stage designs that will use the information at the first stage of the study to either reject the therapy or continue testing with either an optimistic or a skeptic target response rate, while the type I error rate is controlled. We also introduce new optimal criteria to reduce the expected total sample size.     

Data quality control in genetic case-control association studies

This protocol details the steps for data quality assessment and control that are typically carried out during case-control association studies. The steps described involve the identification and removal of DNA samples and markers that introduce bias. These critical steps are paramount to the success of a case-control study and are necessary before statistically testing for association. We describe how to use PLINK, a tool for handling SNP data, to perform assessments of failure rate per individual and per SNP and to assess the degree of relatedness between individuals. We also detail other quality-control procedures, including the use of SMARTPCA software for the identification of ancestral outliers. These platforms were selected because they are user-friendly, widely used and computationally efficient. Steps needed to detect and establish a disease association using case-control data are not discussed here. Issues concerning study design and marker selection in case-control studies have been discussed in our earlier protocols. This protocol, which is routinely used in our labs, should take approximately 8 h to complete.     

A general framework for two-stage analysis of genome-wide association studies and its application to case-control studies

Two-stage analyses of genome-wide association studies have been proposed as a means to improving power for designs including family-based association and gene-environment interaction testing. In these analyses, all markers are first screened via a statistic that may not be robust to an underlying assumption, and the markers thus selected are then analyzed in a second stage with a test that is independent from the first stage and is robust to the assumption in question. We give a general formulation of two-stage designs and show how one can use this formulation both to derive existing methods and to improve upon them, opening up a range of possible further applications. We show how using simple regression models in conjunction with external data such as average trait values can improve the power of genome-wide association studies. We focus on case-control studies and show how it is possible to use allele frequencies derived from an external reference to derive a powerful two-stage analysis. An illustration involving the Wellcome Trust Case-Control Consortium data shows several genome-wide-significant associations, subsequently validated, that were not significant in the standard analysis. We give some analytic properties of the methods and discuss some underlying principles.     

Informative missingness in genetic association studies: case-parent designs

We consider the effect of informative missingness on association tests that use parental genotypes as controls and that allow for missing parental data. Parental data can be informatively missing when the probability of a parent being available for study is related to that parent's genotype; when this occurs, the distribution of genotypes among observed parents is not representative of the distribution of genotypes among the missing parents. Many previously proposed procedures that allow for missing parental data assume that these distributions are the same. We propose association tests that behave well when parental data are informatively missing, under the assumption that, for a given trio of paternal, maternal, and affected offspring genotypes, the genotypes of the parents and the sex of the missing parents, but not the genotype of the affected offspring, can affect parental missingness. (This same assumption is required for validity of an analysis that ignores incomplete parent-offspring trios.) We use simulations to compare our approach with previously proposed procedures, and we show that if even small amounts of informative missingness are not taken into account, they can have large, deleterious effects on the performance of tests.     

Robust tests for matched case-control genetic association studies

Background

Infectious disease of livestock continues to be a cause of substantial economic loss and has adverse welfare consequences in both the developing and developed world. New solutions to control disease are needed and research focused on the genetic loci determining variation in immune-related traits has the potential to deliver solutions. However, identifying selectable markers and the causal genes involved in disease resistance and vaccine response is not straightforward. The aims of this study were to locate regions of the bovine genome that control the immune response post immunisation. 195 F2 and backcross Holstein Charolais cattle were immunised with a 40-mer peptide derived from foot-and-mouth disease virus (FMDV). T cell and antibody (IgG1 and IgG2) responses were measured at several time points post immunisation. All experimental animals (F0, F1 and F2, n = 982) were genotyped with 165 microsatellite markers for the genome scan.

Results

Considerable variability in the immune responses across time was observed and sire, dam and age had significant effects on responses at specific time points. There were significant correlations within traits across time, and between IgG1 and IgG2 traits, also some weak correlations were detected between T cell and IgG2 responses. The whole genome scan detected 77 quantitative trait loci (QTL), on 22 chromosomes, including clusters of QTL on BTA 4, 5, 6, 20, 23 and 25. Two QTL reached 5% genome wide significance (on BTA 6 and 24) and one on BTA 20 reached 1% genome wide significance.

Conclusions

A proportion of the variance in the T cell and antibody response post immunisation with an FDMV peptide has a genetic component. Even though the antigen was relatively simple, the humoral and cell mediated responses were clearly under complex genetic control, with the majority of QTL located outside the MHC locus. The results suggest that there may be specific genes or loci that impact on variation in both the primary and secondary immune responses, whereas other loci may be specifically important for early or later phases of the immune response. Future fine mapping of the QTL clusters identified has the potential to reveal the causal variations underlying the variation in immune response observed.     

A Gaussian copula approach for the analysis of secondary phenotypes in case-control genetic association studies

In many case-control genetic association studies, a set of correlated secondary phenotypes that may share common genetic factors with disease status are collected. Examination of these secondary phenotypes can yield valuable insights about the disease etiology and supplement the main studies. However, due to unequal sampling probabilities between cases and controls, standard regression analysis that assesses the effect of SNPs (single nucleotide polymorphisms) on secondary phenotypes using cases only, controls only, or combined samples of cases and controls can yield inflated type I error rates when the test SNP is associated with the disease. To solve this issue, we propose a Gaussian copula-based approach that efficiently models the dependence between disease status and secondary phenotypes. Through simulations, we show that our method yields correct type I error rates for the analysis of secondary phenotypes under a wide range of situations. To illustrate the effectiveness of our method in the analysis of real data, we applied our method to a genome-wide association study on high-density lipoprotein cholesterol (HDL-C), where "cases" are defined as individuals with extremely high HDL-C level and "controls" are defined as those with low HDL-C level. We treated 4 quantitative traits with varying degrees of correlation with HDL-C as secondary phenotypes and tested for association with SNPs in LIPG, a gene that is well known to be associated with HDL-C. We show that when the correlation between the primary and secondary phenotypes is >0.2, the P values from case-control combined unadjusted analysis are much more significant than methods that aim to correct for ascertainment bias. Our results suggest that to avoid false-positive associations, it is important to appropriately model secondary phenotypes in case-control genetic association studies.     

Combining association tests across multiple genetic markers in case-control studies

In the search to detect genetic associations between complex traits and DNA variants, a practice is to select a subset of Single Nucleotide Polymorphisms (tag SNPs) in a gene or chromosomal region of interest. This allows study of untyped polymorphisms in this region through the phenomenon of linkage disequilibrium (LD). However, it is crucial in the analysis to utilize such multiple SNP markers efficiently. In this study, we present a robust testing approach (T(C)) that combines single marker association test statistics or p values. This combination is based on the summation of single test statistics or p values, giving greater weight to those with lower p values. We compared the powers of T(C) in identifying common trait loci, using tag SNPs within the same haplotype block that the trait loci reside, with competing published tests, in case-control settings. These competing tests included the Bonferroni procedure (T(B)), the simple permutation procedure (T(P)), the permutation procedure proposed by Hoh et al. (T(P-H)) and its revised version using 'deflated' statistics (T(P-H_def)), the traditional chi(2) procedure (T(CHI)), the regression procedure (Hotelling T(2) test) (T(R)) and the haplotype-based test (T(H)). Results of these comparisons show that our proposed combining procedure (T(C)) is preferred in all scenarios examined. We also apply this new test to a data set from a previously reported association study on airway responsiveness to methacholine.     

Testing Hardy-Weinberg proportions in a frequency-matched case-control genetic association study

In case-control genetic association studies, cases are subjects with the disease and controls are subjects without the disease. At the time of case-control data collection, information about secondary phenotypes is also collected. In addition to studies of primary diseases, there has been some interest in studying genetic variants associated with secondary phenotypes. In genetic association studies, the deviation from Hardy-Weinberg proportion (HWP) of each genetic marker is assessed as an initial quality check to identify questionable genotypes. Generally, HWP tests are performed based on the controls for the primary disease or secondary phenotype. However, when the disease or phenotype of interest is common, the controls do not represent the general population. Therefore, using only controls for testing HWP can result in a highly inflated type I error rate for the disease- and/or phenotype-associated variants. Recently, two approaches, the likelihood ratio test (LRT) approach and the mixture HWP (mHWP) exact test were proposed for testing HWP in samples from case-control studies. Here, we show that these two approaches result in inflated type I error rates and could lead to the removal from further analysis of potential causal genetic variants associated with the primary disease and/or secondary phenotype when the study of primary disease is frequency-matched on the secondary phenotype. Therefore, we proposed alternative approaches, which extend the LRT and mHWP approaches, for assessing HWP that account for frequency matching. The goal was to maintain more (possible causative) single-nucleotide polymorphisms in the sample for further analysis. Our simulation results showed that both extended approaches could control type I error probabilities. We also applied the proposed approaches to test HWP for SNPs from a genome-wide association study of lung cancer that was frequency-matched on smoking status and found that the proposed approaches can keep more genetic variants for association studies.     

Backward genotype-trait association (BGTA)-based dissection of complex traits in case-control designs

BACKGROUND: The studies of complex traits project new challenges to current methods that evaluate association between genotypes and a specific trait. Consideration of possible interactions among loci leads to overwhelming dimensions that cannot be handled using current statistical methods. METHODS: In this article, we evaluate a multi-marker screening algorithm--the backward genotype-trait association (BGTA) algorithm for case-control designs, which uses unphased multi-locus genotypes. BGTA carries out a global investigation on a candidate marker set and automatically screens out markers carrying diminutive amounts of information regarding the trait in question. To address the 'too many possible genotypes, too few informative chromosomes' dilemma of a genomic-scale study that consists of hundreds to thousands of markers, we further investigate a BGTA-based marker selection procedure, in which the screening algorithm is repeated on a large number of random marker subsets. Results of these screenings are then aggregated into counts that the markers are retained by the BGTA algorithm. Markers with exceptional high counts of returns are selected for further analysis. RESULTS AND CONCLUSION: Evaluated using simulations under several disease models, the proposed methods prove to be more powerful in dealing with epistatic traits. We also demonstrate the proposed methods through an application to a study on the inflammatory bowel disease.     

Basic statistical analysis in genetic case-control studies

This protocol describes how to perform basic statistical analysis in a population-based genetic association case-control study. The steps described involve the (i) appropriate selection of measures of association and relevance of disease models; (ii) appropriate selection of tests of association; (iii) visualization and interpretation of results; (iv) consideration of appropriate methods to control for multiple testing; and (v) replication strategies. Assuming no previous experience with software such as PLINK, R or Haploview, we describe how to use these popular tools for handling single-nucleotide polymorphism data in order to carry out tests of association and visualize and interpret results. This protocol assumes that data quality assessment and control has been performed, as described in a previous protocol, so that samples and markers deemed to have the potential to introduce bias to the study have been identified and removed. Study design, marker selection and quality control of case-control studies have also been discussed in earlier protocols. The protocol should take ~1 h to complete.     

False discovery rate control in two-stage designs

ABSTRACT: BACKGROUND: For gene expression or gene association studies with a large number of hypotheses the number of measurements per marker in a conventional single-stage design is often low due to limited resources. Two-stage designs have been proposed where in a first stage promising hypotheses are identified and further investigated in the second stage with larger sample sizes. For two types of two-stage designs proposed in the literature we derive multiple testing procedures controlling the False Discovery Rate (FDR) demonstrating FDR control by simulations: designs where a fixed number of top-ranked hypotheses are selected and designs where the selection in the interim analysis is based on an FDR threshold. In contrast to earlier approaches which use only the second-stage data in the hypothesis tests (pilot approach), the proposed testing procedures are based on the pooled data from both stages (integrated approach). Results: For both selection rules the multiple testing procedures control the FDR in the considered simulation scenarios. This holds for the case of independent observations across hypotheses as well as for certain correlation structures. Additionally, we show that in scenarios with small effect sizes the testing procedures based on the pooled data from both stages can give a considerable improvement in power compared to tests based on the second-stage data only. Conclusion: The proposed hypothesis tests provide a tool for FDR control for the considered two-stage designs. Comparing the integrated approaches for both selection rules with the corresponding pilot approaches showed an advantage of the integrated approach in many simulation scenarios.     

Joint analysis for genome-wide association studies in family-based designs

In family-based data, association information can be partitioned into the between-family information and the within-family information. Based on this observation, Steen et al. (Nature Genetics. 2005, 683-691) proposed an interesting two-stage test for genome-wide association (GWA) studies under family-based designs which performs genomic screening and replication using the same data set. In the first stage, a screening test based on the between-family information is used to select markers. In the second stage, an association test based on the within-family information is used to test association at the selected markers. However, we learn from the results of case-control studies (Skol et al. Nature Genetics. 2006, 209-213) that this two-stage approach may be not optimal. In this article, we propose a novel two-stage joint analysis for GWA studies under family-based designs. For this joint analysis, we first propose a new screening test that is based on the between-family information and is robust to population stratification. This new screening test is used in the first stage to select markers. Then, a joint test that combines the between-family information and within-family information is used in the second stage to test association at the selected markers. By extensive simulation studies, we demonstrate that the joint analysis always results in increased power to detect genetic association and is robust to population stratification.