A complex repeated DNA sequence within the Drosophila transposable element copia.

A 320 nucleotide repeated DNA sequence within the copia coding element of Drosophila melanogaster has been identified and characterized. This sequence has been localized by DNA-DNA hybridization and electron microscopic analysis of heteroduplexes to the approximate middle of the 5 kb copia coding region. The primary sequence of this repeated DNA has been determined. The sequence is composed of three related subunits, 35-37 nucleotides in length (A, B and C). This 105 nucleotide higher order repeat has apparently been duplicated twice to yield a complex repeated sequence, ABCA'B'C'A"B"C", which exhibits divergence among the individual subunits. This sequence is AT rich, as are the direct terminal repeats which flank the copia coding region, but does not contain any apparent homology with the terminal repeats. This repeated sequence contains three presumptive polyadenylation signals and two 25 nucleotide, imperfectly matched, inverted repeat sequences adjacent to two of the polyadenylation sequences.     

A Mycoplasma genetic element resembling prokaryotic insertion sequences

Nucleotide sequence analysis of two Mycoplasma hyopneumoniae-derived copies of a repetitive genetic element revealed structural similarities to typical prokaryotic insertion sequences. This is the first such sequence identified in the class Mollicutes. The element spans approximately 1550bp, with 28bp inverted terminal repeats. Two open reading frames occur within the sequence, one potentially encoding a protein with a size-variant alpha-helical domain containing heptameric leucine periodicity. Hybridization data with several strains from each of two mycoplasma species showed that the repetitive sequence is variably distributed within the M. hyopneumoniae and Mycoplasma hyorhinis chromosomes and indicated that in some cases the repeated sequence is contained within a larger genetic element which may be the result of phage or plasmid insertion.     

Rare group I intron with insertion sequence element in a bacterial ribonucleotide reductase gene

A rare group I intron in a cyanobacterial ribonucleotide reductase gene has been characterized. It contains a mobile insertion sequence element not required for RNA splicing. Ribonucleotide reductase genes were found to be hot spots for all three types of self-splicing intervening sequences, including group I and II introns and inteins.     

DNA sequence at the integration sites of the insertion element IS1.

We have detected two independent occurrences of insertion mutations in the lacl gene of E. Coli, and have used small plasmids carrying the l gene to purify large amounts of DNA containing these insertions. Analyses with restriction endonucleases and DNA sequencing techniques establish that both insertions involve the previously characterized element IS1. In each case, the integration of IS1 into the l gene DNA is associated with a directly repeated sequence of 9 nucleotides appearing at each end of the insertion element. Since one of these sequences was present in the wild-type gene, the second sequence either preexisted in the IS1 before integration, or else was generated by the process of insertion itself. The 9 base repeat is different in both cases. We discuss the relevance of these findings to the mechanism of integration of transposable elements.     

Transposition of a bacterial insertion sequence in chloroplasts

Bacterial transposable elements (IS elements, transposons) represent an important determinant of genome structure and dynamics, and are a major force driving genome evolution. Here, we have tested whether bacterial insertion sequences (IS elements) can transpose in a prokaryotic compartment of the plant cell, the plastid (chloroplast). Using plastid transformation, we have integrated different versions of the Escherichia coli IS element IS 150 into the plastid genome of tobacco ( Nicotiana tabacum ) plants. We show that IS 150 is faithfully mobilized inside the chloroplast, and that enormous quantities of transposition intermediates accumulate. As synthesis of the IS 150 transposase is dependent upon programmed ribosomal frame shifting, our data indicate that this process also occurs in chloroplasts. Interestingly, all insertion events detected affect a single site in the plastid genome, suggesting that the integration of IS 150 is highly sequence dependent. In contrast, the initiation of the transposition process was found to be independent of the sequence context. Finally, our data also demonstrate that plastids lack the capacity to repair double-strand breaks in their genomes by non-homologous end joining, a finding that has important implications for genome stability, and which may explain the peculiar immunity of the plastid to invading promiscuous DNA sequences of nuclear and mitochondrial origin.     

A conserved tandemly repeated DNA sequence inCruciferae

Several HindIII monomer units of a tandemly repeated nuclear DNA sequence ofBrassica campestris andBrassica juncea (Cruciferae) have been cloned and sequenced. The monomer units, of 177 bp length, are AT-rich and share 88% homology between themselves and more than 65% homology with similar repeats of otherCruciferae likeBrassica oleracea, Sinapis alba andRaphanus sativus. Thus unlike the rapid divergence of tandemly repeated satellite DNA in other organisms, this DNA element is highly conserved thus indicating its importance.     

The early phase of a bacterial insertion sequence infection

Bacterial insertion sequences are the simplest form of autonomous mobile DNA. It is unknown whether they need to have beneficial effects to infect and persist in bacterial populations, or whether horizontal gene transfer suffices for their persistence. We address this question by using branching process models to investigate the critical, early phase of an insertion sequence infection. We find that the probability of a successful infection is low and depends linearly on the difference between the rate of horizontal gene transfer and the fitness cost of the insertion sequences. Our models show that the median time to extinction of an insertion sequence that dies out is very short, while the median time for a successful infection to reach a modest population size is very long. We conclude that horizontal gene transfer is strong enough to allow the persistence of insertion sequences, although infection is an erratic and slow process.     

The early phase of a bacterial insertion sequence infection

Bacterial insertion sequences are the simplest form of autonomous mobile DNA. It is unknown whether they need to have beneficial effects to infect and persist in bacterial populations, or whether horizontal gene transfer suffices for their persistence. We address this question by using branching process models to investigate the critical, early phase of an insertion sequence infection. We find that the probability of a successful infection is low and depends linearly on the difference between the rate of horizontal gene transfer and the fitness cost of the insertion sequences. Our models show that the median time to extinction of an insertion sequence that dies out is very short, while the median time for a successful infection to reach a modest population size is very long. We conclude that horizontal gene transfer is strong enough to allow the persistence of insertion sequences, although infection is an erratic and slow process.     

Characterization of the Coxiella burnetti sucB gene encoding an immunogenic dihydrolipoamide succinyltransferase.

The Coxiella burnetii sucB gene encoding the dihydrolipoamide succinyltransferase (E2o) enzyme was cloned by immunological screening of a lambda EMBL3 genomic library prepared from strain Nine Mile DNA and sequenced. The homology of the cloned gene product to the counterpart in Escherichia coli was 54.3%, but the homology of the N-terminal region was only 42%. The gene was expressed in E. coli as an independent unit from its own promoter, producing an immunoreactive protein of about 50 kDa on SDS-PAGE which reacted with antisera from laboratory animals and sera from human patients with acute Q fever. The study results suggest that the C. burnetii E2o enzyme may serve as a potential target antigen for diagnostic assays for Q fever.     

A unique element resembling a processed pseudogene

We describe a unique DNA element with structural features of a processed pseudogene but with important differences. It is located within an 8.4-kilobase pair region of chicken DNA containing five histone genes, but it is not related to these genes. The presence of terminal repeats, an open reading frame (and stop codon), polyadenylation/processing signal, and a poly(A) rich region about 20 bases 3' to this, together with a lack of 5' promoter motifs all suggest a processed pseudogene. However, no parent gene can be detected in the genome by Southern blotting experiments and, in addition, codon boundary values and mid-base correlations are not consistent with a protein coding region of a eukaryotic gene. The element was detected in DNA from different chickens and in peafowl, but not in quail, pheasant, or turkey.     

Amplification of alpha-fetoprotein complementary DNA by insertion into a bacterial plasmid.

A fragment of the α-fetoprotein (AFP) structural gene was purified and amplified by bacterial cloning techniques. Double-stranded DNA_AFP was constructed from a cDNA copy of greater than 95% pure mRNA_AFP and inserted into E. coli plasmid pBR322 by poly(dA-dT)-linkers. Chimeric plasmid DNA isolated from transformants of E. coli strain χ1776 have been shown to contain α-fetoprotein sequences by hybridization to labeled mRNA_AFP. One clone, designated pA5 (chimeric plasmid pBR322 containing a cDNA_AFP sequence isolated from clone 5), has been studied in more detail. The inserted sequence of approximately 950 nucleotide pairs was positively identified by a hybridization-translation procedure. Hybridization of [³H]uridine-labeled poly(A)-containing RNA from an AFP-secreting cell line to excess pA5 DNA immobilized on nitrocellulose filters was used to show the selectivity of this probe for detecting expression of the AFP gene.     

DNA element of Corynebacterium diphtheriae with properties of an insertion sequence and usefulness for epidemiological studies.

The segment of DNA which is inserted within the tox gene of bacteriophage gamma and is responsible for its Tox- phenotype was found to be present and repeated approximately 30 times in the chromosome of Corynebacterium diphtheriae Belfanti 1030. Other C. diphtheriae strains contained a variable number of copies (1 to 25) of the same element. Sequence analysis showed that this repeated and interspersed DNA element was flanked by 9-base-pair direct repeats and that the 5' and 3' ends of the insertion contained sequences forming an imperfect inverted repeat. Therefore, the DNA segment here described has most of the typical structural features of a bacterial insertion sequence element. We show that different C. diphtheriae isolates derived from the same outbreak of diphtheria have an identical genomic distribution of this DNA element and that such DNA can be useful for epidemiological studies.