Genetic analysis of a lactococcal plasmid replicon

Summary The sequence and genetic organization was determined of the 2508 by lactococcal portion of pFX2, which was derived from a crypticLactococcus lactis subsp.lactis plasmid and used as the basis for construction of a series of lactococcal vectors. A lactococcal plasmid plus origin and two replication protein-coding regions (repA andrepB) were located. RepA has a helix-turn-helix motif, a geometry typical of DNA-binding proteins. RepB shows a high degree of homology to the plasmid replication initiation proteins from other gram-positive bacteria andMycoplasma. The transcribed inverted repeat sequence betweenrepA andrepB could form an attenuator to regulate pFX2 replication. Upstream of theori site, and in a region which was non-essential for replication, a 215 by sequence identical to the staphylococcal plasmid pE194 and carrying the RS_A site was identified. The genetic organization of this lactococcal plasmid replicon shares significant similarity with pE194 group plasmids.     

Cloning and DNA sequence analysis of two abortive infection phage resistance determinants from the lactococcal plasmid pNP40.

The lactococcal plasmid pNP40, from Lactococcus lactis subsp. lactis biovar diacetylactis DRC3, confers complete resistance to the prolate-headed phage phi c2 and the small isometric-headed phage phi 712 in L. lactis subsp. lactis MG1614. A 6.0-kb NcoI fragment of pNP40 cloned in the lactococcal Escherichia coli shuttle vector pAM401 was found to confer partial resistance to phi 712. Subcloning and deletion analysis of the recombinant plasmid pPG01 defined a 2.5-kb ScaIHpaI fragment as conferring phage insensitivity. Sequence analysis of this region confirmed the presence of two overlapping open reading frames (ORFs). Further subcloning of pNP40 to characterize the resistance determinant active against phi c2 identified a 5.6-kb EcoRV fragment of pNP40 which, when cloned in pAM401, conferred partial resistance to both phi c2 and phi 712. Subcloning and deletion analysis of the recombinant plasmid pCG1 defined a 3.7-kb EcoRV-XbaI fragment as encoding phage insensitivity. DNA sequence analysis of this region revealed the presence of a single complete ORF. The introduction of a frameshift mutation at the unique BglII site within this ORF disrupted the phage resistance phenotype, confirming that this ORF is responsible for the observed phage insensitivity. The mechanisms encoded by pPG01 and pCG1 in L. lactis subsp. lactis MG1614 conformed to the criteria defining abortive infection and were designated AbiE and AbiF, respectively. Analysis of the phage DNA content of phi 712-infected hosts containing AbiF demonstrated that it inhibited the rate of phage DNA replication, while AbiE had little effect on phage DNA replication, suggesting a later target of inhibition. The predicted protein product of abiF shows significant homology to the products of two other lactococcal abortive infection genes, abiD and abiD1.     

Identification of a recA homolog (recALP) on the conjugative lactococcal phage resistance plasmid pNP40: evidence of a role for chromosomally encoded recAL in abortive infection.

The determinants for two bacteriophage resistance mechanisms, AbiE and AbiF, are separated by approximately 3,300 nucleotides on the lactococcal plasmid pNP40 (P. Garvey, G.F. Fitzgerald, and C. Hill, Appl. Environ. Microbiol. 61:4321-4328, 1995). DNA sequence analysis of the intervening region led to the identification of two open reading frames (ORFs) which are transcribed in the opposite direction to the Abi determinants. One of these ORFs encodes a recA homolog (designated recALP). This is the first report of a recA-like determinant located to a plasmid. The second ORF (orfU) shares homology with the umuC gene of the SOS response. Analysis of a number of lactococcal strains confirmed the presence of recALP-like sequences in at least two other lactococcal strains. The proximity of the recA and umuC homologs suggested a possible role in the phase resistance encoded by the Abi determinants. However, no evidence was obtained to demonstrate a function for either ORF in the expression of either AbiE or AbiF. Nor could the recALP gene restore resistance to mitomycin in a recA-deficient lactococcal strain, VEL1122. Interestingly, it was shown that the chromosomally encoded recA is necessary for complete expression of the AbiF phenotype, confirming a role for RecA in this abortive infection system.     

Molecular organization of the minimal replicon of novel, narrow-host-range, lactococcal plasmid pCI305

Plasmid pCI305 is an 8.7-kb, narrow-host-range, cryptic plasmid originating from Lactococcus lactis subsp. lactis UC317. The nucleotide sequence of the pCI305 replication region was determined. A single open reading frame of 1158 bp was identified in the trans-active domain repB. The size of the predicted repB protein (46 kDa) is in close agreement with the size of the repB product visualized in vivo in Escherichia coli when repB was placed under control of the inducible phi T7 RNA polymerase promoter. In vivo substitution of the native repB promoter sequence with a Tn5-derived promoter sequence was demonstrated. repA, a 344-bp cis-acting region which is the probable pCI305 replication origin region, was noncoding, was AT-rich, and possessed a unique set of inverted and direct repeat sequences. No significant homology between repA or repB and other gram-positive replication regions was evident. Combined with the absence of a detectable single-stranded DNA intermediate during replication, these results indicate that the pCI305 replication region differs markedly from most gram-positive replicons examined to date. The presence on other lactococcal plasmids of replication regions related to that of pCI305 was demonstrated.     

Nucleotide sequence analysis of the lactococcal EPS plasmid pNZ4000

The complete 42180-bp nucleotide sequence of the mobilization plasmid pNZ4000, coding for exopolysaccharide (EPS) production in Lactococcus lactis, was determined. This plasmid contains a region involved in EPS biosynthesis, four functional replicons, a region containing mobilization genes, and three origin of transfer (oriT) sequences. Sequences identical to these oriT sequences were also found on two other lactococcal plasmids and a plasmid from Lactobacillus helveticus. Several complete and partial IS elements were identified on pNZ4000, including iso-ISS1, iso-IS946, and iso-IS982 sequences. Furthermore, pNZ4000 contains a gene cluster that may encode a cobalt transport system and a gene that encodes a CorA homologue which may function as a magnesium transporter.     

Isolation and evolutionary analysis of a RepFVIB replicon of the plasmid pSU212

We have isolated at least two different replication regions from pSU401, a Tn802 insertion derivative of the IncFVI plasmid pSU212. One of the replication regions (RepFVIB) is highly homologous to the RepFIIA replicon of IncFII plasmids, and thus belongs to the RepFIIA family. We have also cloned the incompatibility determinant (incFVI) and the copy number control gene (cop) from RepFVIB and determined their nucleotide sequences. The analysis of the sequences supports the idea of a modular evolution of RepFIIA plasmids.     

Bacillus subtilis soil isolates: plasmid replicon analysis and construction of a new theta-replicating vector

We have searched for plasmids in a collection of 55 Bacillus subtilis strains isolated from various natural sources of the territory of Belarus. Twenty percent of the strains contained one or two plasmids of either 6-8 or approximately 90 kb. Small plasmids were shown to carry a rolling circle replicon of the pC194 type. Four out of the eight large plasmids contained a related theta replicon that has no homolog in databases as shown by sequence determination. A B. subtilis/Escherichia coli shuttle vector based on this replicon was constructed. It has a low copy number (6 units per chromosome) and is stably inherited in B. subtilis. It might thus be a useful tool for DNA cloning. These data extend previous observations, indicating that most of the small plasmids of B. subtilis replicate as rolling circles and belong to the pC194 family. On the contrary, large plasmids appear to form a large pool of theta-replicating determinants, since three different replicons have already been isolated from them.     

Design of a microaerobically inducible replicon for high-yield plasmid DNA production

A pUC-derived replicon inducible by oxygen limitation was designed and tested in fed-batch cultures of Escherichia coli. It included the addition of a second inducible copy of rnaII, the positive replication control element. The rnaII gene was expressed from P_trc and cloned into pUC18 to test the hypothesis that the ratio of the positive control molecule RNAII to the negative control element, RNAI, was the determinant of plasmid copy number per chromosome (PCN). The construct was evaluated in several E. coli strains. Evaluations of the RNAII/RNAI ratio, PCN and plasmid yield normalized to biomass (Y_pDNA/X) were performed and the initial hypothesis was probed. Furthermore, in high cell-density cultures in shake flasks, an outstanding amount of 126 mg/L of plasmid was produced. The microaerobically inducible plasmid was obtained by cloning the rnaII gene under the control of the oxygen-responsive Vitreoscilla stercoraria hemoglobin promoter. For this plasmid, but not for pUC18, the RNAII/RNAI ratio, PCN and Y_pDNA/X efficiently increased after the shift to the microaerobic regime in fed-batch cultures in a 1 L bioreactor. The Y_pDNA/X of the inducible plasmid reached 12 mg/g at the end of the fed-batch but the original pUC18 only reached ca. 6 mg/g. The proposed plasmid is a valuable alternative for the operation and scale-up of plasmid DNA production processes in which mass transfer limitations will not represent an issue.     

Genetic analysis of a novel plasmid pZMX101 from Halorubrum saccharovorum: determination of the minimal replicon and comparison with the related haloarchaeal plasmid pSCM201

The DNA sequence of a novel haloarchaeal plasmid pZMX101 (3918 bp) from Halorubrum saccharovorum was determined and six ORFs were predicted. The largest ORF encodes a putative replication initiation protein RepA, which shares 40% sequence similarity with the Rep201 of a theta-replication plasmid pSCM201 recently isolated from Haloarcula, suggesting that pZMX101 might replicate via a theta-type mechanism. Using pZMX101 as the only haloarchaeal replicon, a shuttle vector pZMX108 was constructed and successfully transformed into Haloferax volcanii DS70. Based on this in vivo system, the minimal replicon (1978 bp) of pZMX101 was determined. It is composed of the repA gene plus c. 400-bp upstream and 300-bp downstream sequences. Significantly, the putative replication origin of pZMX101 and that of pSCM201 contain different types of sequence motifs, and these two plasmids exhibit distinct host preference for Haloferax and Haloarcula, respectively.     

The use of cadmium resistance on the phage-resistance plasmid pNP40 facilitates selection for its horizontal transfer to industrial dairy starter lactococci

AIMS: To facilitate the horizontal transfer and selection of phage-resistance plasmids in industrial lactococci. METHODS AND RESULTS: Cadmium-resistance properties similar to those previously identified in Lactococcus were linked to the well-known phage-resistance plasmid pNP40. This finding was exploited to facilitate delivery of the plasmid to an industrial cheese starter Lactococcus lactis DPC4268. Additionally, 25 different cadmium-sensitive cheese starter lactococci were also identified as potential recipients for the phage-resistance plasmid pNP40, and also the plasmids pAH90/pAH82 which also encode cadmium resistance. All three plasmids were successfully conjugated to strain DPC4268. Cheddar cheese was manufactured in industry with the pNP40 phage-resistant transconjugant. SIGNIFICANCE AND IMPACT OF THE STUDY: Food-grade enhancement of phage resistance in industrial starter strains has been made simpler by the use of this selection, especially since the majority of potential recipient starter strains analysed were cadmium sensitive.     

Sequence analysis and molecular characterization of the temperate lactococcal bacteriophage r1t

The temperate lactococcal bacteriophage r1t was isolated from its lysogenic host and its genome was subjected to nucleotide sequence analysis. The linear r1t genome is composed of 33 350 bp and was shown to possess 3′ staggered cohesive ends. Fifty open reading frames (ORFs) were identified which are, probably, organized in a life-cycle-specific manner. Nucleotide sequence comparisons, N-terminal amino acid sequencing and functional analyses enabled the assignment of possible functions to a number of DNA sequences and ORFs. In this way, ORFs specifying regulatory proteins, proteins involved in DNA replication, structural proteins, a holin, a lysin, an integrase, and a dUTPase were putatively identified. One ORF seems to be contained within a self-splicing group I intron. In addition, the bacteriophage att site required for site-specific integration into the host chromosome was determined.     

Method for the isolation of the replication region of a bacterial replicon: construction of a mini-F'kn plasmid.

A purified fragment of deoxyribonucleic acid (DNA) that determines resistance to kanamycin and is incapable of self-replication was used to select a self-replicating fragment from an EcoRI endonuclease digest of the sex factor F'lac. This F'lac fragment, exhibiting a molecular weight of 6 X 10(6), carries the genes essential for maintenance of the F replicon in Escherichia coli cells. The constructed mini-F'km plasmid also retains the incompatibility properties of the parent F'lac plasmid. Large amounts of the kanamycin resistance fragment of a molecular weight of 4.5 X 10(6) with an EcoRI-cleaved, self-replicating derivative of colicinogenic plasmid E1 that has a molecular weight of 2.2 X 10(6), The recombinant plasmid is able to replicate extensively in E. coli in medium containing chloramphenicol, and, therefore, large quantities of this plasmid DNA can be obtained. The substantial difference in size between the two fragments in the recombinant plasmid greatly facilitates their separation by preparative agarose gel electrophoresis.     

Cloning of cysE gene of Escherichia coli with a mini-Mu-lac containing a plasmid replicon

The restriction map of cysE gene of Escherichia coli was established after cloning a mini-Mu-lac bacteriophage containing a plasmid replicon and recloning on pBR322 vector plasmid. Enzyme assays of transformants indicated the lack of autoregulation of cysE gene.     

Sequence analysis of a 1296-nucleotide plasmid from Xylella fastidiosa

A cryptic plasmid from Xylella fastidiosa strain ATCC 35868 was cloned, sequenced, and the sequence entered into GenBank (U71220). The plasmid is 1296 nucleotides in length with 55% GC content and three open reading frames. A plasmid with sequence homology was found in only one other strain of X. fastidiosa , ATCC 35878. Searches of the GenBank reveal nucleotide sequence homology with plasmid pNKH43 from Stenotrophomonas maltophilia , and amino acid sequence homology with phage Pf3 from Pseudomonas aeruginosa , plasmid pAP12875 from Acetobacter pasteurianus , and plasmid pVT736-1 from Actinobacillus actinomycetemcomitans .     

Computational design and characterization of a temperature-sensitive plasmid replicon for gram positive thermophiles

Background

Temperature-sensitive (Ts) plasmids are useful tools for genetic engineering, but there are currently none compatible with the gram positive, thermophilic, obligate anaerobe, Clostridium thermocellum. Traditional mutagenesis techniques yield Ts mutants at a low frequency, and therefore requires the development of high-throughput screening protocols, which are also not available for this organism. Recently there has been progress in the development of computer algorithms which can predict Ts mutations. Most plasmids currently used for genetic modification of C. thermocellum are based on the replicon of plasmid pNW33N, which replicates using the RepB replication protein. To address this problem, we set out to create a Ts plasmid by mutating the gene coding for the RepB replication protein using an algorithm designed by Varadarajan et al. (1996) for predicting Ts mutants based on the amino-acid sequence of the protein.

Results

A library of 34 mutant plasmids was designed, synthesized and screened, resulting in 6 mutants which exhibited a Ts phenotype. Of these 6, the one with the most temperature-sensitive phenotype (M166A) was compared with the original plasmid. It exhibited lower stability at 48°C and was completely unable to replicate at 55°C.

Conclusions

The plasmid described in this work could be useful in future efforts to genetically engineer C. thermocellum, and the method used to generate this plasmid may be useful for others trying to make Ts plasmids.     

Structural and functional analysis of the single-strand origin of replication from the lactococcal plasmid pWV01

The single-strand origin (SSO) of the rolling-circle (RC), broad-host-range lactococcal plasmid pWVO1 was functionally characterized. The activity of this SSO in the conversion of single-stranded DNA to double-stranded DNA was tested both in vivo and in vitro. In addition, the effect of this SSO on plasmid maintenance was determined. The functional pWVO1 SSO comprises a 250 by region, containing two inverted repeats (IRs). The activity of each IR was tested, separately and in combination, in a plasmid derivative that was otherwise completely devoid of structures that might function as SSO. One of the IRs (IR 1) showed some homology with other previously described SSOs of the SSO_A type, as well as with the conversion signal of the Escherichia coli phage X174. This IR was shown to have a partial, RNA polymerise-independent activity in complementary strand synthesis, both in vivo and in vitro. The second IR, which had no activity of its own, was required for full SSO activity, both in vivo and in vitro. The conversion of single-stranded DNA to the double-stranded form by the complete SSO was only partly sensitive to inhibition by rifampicin, indicating the existence of an RNA polymerase-independent pathway for this event. The results suggest that the pWVO1 SSO can be activated by two different routes: an RNA polymerise-dependent one (requiring the entire SSO), and an RNA polymerase-independent one (requiring only IR I).     

Isolation of a new broad-host-range IncQ-like plasmid, pTC-F14, from the acidophilic bacterium Acidithiobacillus caldus and analysis of the plasmid replicon

A moderately thermophilic (45 to 50 degrees C), highly acidophilic (pH 1.5 to 2.5), chemolithotrophic Acidithiobacillus caldus strain, f, was isolated from a biooxidation process used to treat nickel ore. Trans-alternating field electrophoresis analysis of total DNA from the A. caldus cells revealed two plasmids of approximately 14 and 45 kb. The 14-kb plasmid, designated pTC-F14, was cloned and shown by replacement of the cloning vector with a kanamycin resistance gene to be capable of autonomous replication in Escherichia coli. Autonomous replication was also demonstrated in Pseudomonas putida and Agrobacterium tumefaciens LBA 4404, which suggested that pTC-F14 is a broad-host-range plasmid. Sequence analysis of the pTC-F14 replicon region revealed five open reading frames and a replicon organization like that of the broad-host-range IncQ plasmids. Three of the open reading frames encoded replication proteins which were most closely related to those of IncQ-like plasmid pTF-FC2 (amino acid sequence identities: RepA, 81%; RepB, 78%; RepC, 74%). However, the two plasmids were fully compatible and pTC-F14 represents a new IncQ-like plasmid replicon. Surprisingly, asymmetrical incompatibility was found with the less closely related IncQ plasmid R300B derivative pKE462 and the IncQ-like plasmid derivative pIE1108. Analysis of the pTC-F14 oriV region revealed five direct repeats consisting of three perfectly conserved 22-bp iterons flanked by iterons of 23 and 21 bp. Plasmid pTC-F14 had a copy number of 12 to 16 copies per chromosome in both E. coli, and A. caldus. The rep gene products of pTC-F14 and pTF-FC2 were unable to functionally complement each other's oriV regions, but replication occurred when the genes for each plasmid's own RepA, RepB, and RepC proteins were provided in trans. Two smaller open reading frames were found between the repB and repA genes of pTC-F14, which encode proteins with high amino acid sequence identity (PasA, 81%; PasB, 72%) to the plasmid addiction system of pTF-FC2. This is the second time a plasmid stability system of this type has been found on an IncQ-like plasmid.     

Use of the plasmid R89S replicon for constructing integration vectors

It has been shown that the plasmid R89S derivatives can be used as integrative vectors for bacteria in which the plasmid is unable to replicate autonomously. The chromosomal and plasmid fragments of phototrophic bacterium Rhodobacter sphaeroides have been cloned in plasmid pVZ365, a SmRKmR-derivative of R89S. The obtained recombinant plasmids were mobilized into R. sphaeroides cells by the I pcP-group conjugative plasmid R751. The frequencies of the SmR-transconjugants formation are 3.7.10(-5) to 5.6.10(-3) per recipient cell. The formation of the SmR-transconjugants has not been revealed in case of the plasmid pVZ365 mobilization. The recombinant molecules containing R. sphaeroides plasmid fragments have been shown to integrate into endogenous plasmids and form cointegrates with them.     

Cloning and sequence analysis of a plasmid replicon from Lactococcus lactis subsp. cremoris FG2

A replication region from one of the Lactococcus lactis subsp. cremoris FG2 plasmids was isolated by cloning of a 4.8-kb XbaI fragment into a replication probe vector and transformation into L. lactis LM0230. A 1.8-kb region within this fragment was sequenced and confirmed by PCR subcloning to encode a functional replicon in LM0230. The replicon consists of an open reading frame encoding a putative replication protein (Rep) of 386 amino acids and a non-coding region (ori) which features several structural motifs typical of other known replication origins, including a 22-bp iteron sequence tandemly repeated three and a half times, a 10-bp direct repeat and two sets of inverted repeats. The ori region could drive replication of its plasmid when supplied with the replication region in-trans. The lack of detectable single-stranded DNA during replication and the existence of extensive homology with other known lactococcal theta replicons strongly suggest that this region encodes a theta-replicating mechanism.