Emergence of biofilm-forming subpopulations upon exposure of Escherichia coli to environmental bacteriophages

Exposure of Escherichia coli MG1655 to environmental bacteriophages results in rapid selection for phage-tolerant subpopulations displaying increased biofilm formation. Analysis of one phage-tolerant strain revealed large amounts of the DNA-binding Dps protein in the outer membrane protein and production of fimbria-like structures. In dps and fimA mutant derivatives of MG1655, no selection of phage-tolerant bacteria upon exposure to bacteriophages occurred, suggesting a role for Dps and type I pili in bacteriophage tolerance.     

Induction of Shiga Toxin-Converting Prophage in Escherichia coli by High Hydrostatic Pressure

Since high hydrostatic pressure is becoming increasingly important in modern food preservation, its potential effects on microorganisms need to be thoroughly investigated. In this context, mild pressures (<200 MPa) have recently been shown to induce an SOS response in Escherichia coli MG1655. Due to this response, we observed a RecA- and LexA-dependent induction of lambda prophage upon treating E. coli lysogens with sublethal pressures. In this report, we extend this observation to lambdoid Shiga toxin (Stx)-converting bacteriophages in MG1655, which constitute an important virulence trait in Stx-producing E. coli strains (STEC). The window of pressures capable of inducing Stx phages correlated well with the window of bacterial survival. When pressure treatments were conducted in whole milk, which is known to promote bacterial survival, Stx phage induction could be observed at up to 250 MPa in E. coli MG1655 and at up to 300 MPa in a pressure-resistant mutant of this strain. In addition, we found that the intrinsic pressure resistance of two types of Stx phages was very different, with one type surviving relatively well treatments of up to 400 MPa for 15 min at 20°C. Interestingly, and in contrast to UV irradiation or mitomycin C treatment, pressure was not able to induce Stx prophage or an SOS response in several natural Stx-producing STEC isolates.     

Induction of Oxidative Stress by High Hydrostatic Pressure in Escherichia coli

Using leaderless alkaline phosphatase as a probe, it was demonstrated that pressure treatment induces endogenous intracellular oxidative stress in Escherichia coli MG1655. In stationary-phase cells, this oxidative stress increased with the applied pressure at least up to 400 MPa, which is well beyond the pressure at which the cells started to become inactivated (200 MPa). In exponential-phase cells, in contrast, oxidative stress increased with pressure treatment up to 150 MPa and then decreased again, together with the cell counts. Anaerobic incubation after pressure treatment significantly supported the recovery of MG1655, while mutants with increased intrinsic sensitivity toward oxidative stress (katE, katF, oxyR, sodAB, and soxS) were found to be more pressure sensitive than wild-type MG1655. Furthermore, mild pressure treatment strongly sensitized E. coli toward t-butylhydroperoxide and the superoxide generator plumbagin. Finally, previously described pressure-resistant mutants of E. coli MG1655 displayed enhanced resistance toward plumbagin. In one of these mutants, the induction of endogenous oxidative stress upon high hydrostatic pressure treatment was also investigated and found to be much lower than in MG1655. These results suggest that, at least under some conditions, the inactivation of E. coli by high hydrostatic pressure treatment is the consequence of a suicide mechanism involving the induction of an endogenous oxidative burst.     

De novo creation of MG1655-derived E. coli strains specifically designed for plasmid DNA production

The interest in plasmid DNA (pDNA) as a biopharmaceutical has been increasing over the last several years, especially after the approval of the first DNA vaccines. New pDNA production strains have been created by rationally mutating genes selected on the basis of Escherichia coli central metabolism and plasmid properties. Nevertheless, the highly mutagenized genetic background of the strains used makes it difficult to ascertain the exact impact of those mutations. To explore the effect of strain genetic background, we investigated single and double knockouts of two genes, pykF and pykA, which were known to enhance pDNA synthesis in two different E. coli strains: MG1655 (wild-type genetic background) and DH5α (highly mutagenized genetic background). The knockouts were only effective in the wild-type strain MG1655, demonstrating the relevance of strain genetic background and the importance of designing new strains specifically for pDNA production. Based on the obtained results, we created a new pDNA production strain starting from MG1655 by knocking out the pgi gene in order to redirect carbon flux to the pentose phosphate pathway, enhance nucleotide synthesis, and, consequently, increase pDNA production. GALG20 (MG1655ΔendAΔrecAΔpgi) produced 25-fold more pDNA (19.1 mg/g dry cell weight, DCW) than its parental strain, MG1655ΔendAΔrecA (0.8 mg/g DCW), in glucose. For the first time, pgi was identified as an important target for constructing a high-yielding pDNA production strain.     

2D [<Superscript>1</Superscript>H,<Superscript>13</Superscript>C] NMR study of carbon fluxes during glucose utilization by <Emphasis Type="Italic">Escherichia coli</Emphasis> MG1655

Carbon fluxes through main pathways of glucose utilization in Escherichia coli cells-glycolysis, pentose phosphate pathway (PPP), and Enther-Doudoroff pathway (EDP)—were studied. Their ratios were analyzed in E. coli strains MG1655, MG1655Δ(edd-eda), MG1655Δ(zwf, edd-eda), and MG1655Δ(pgi, edd-eda). It was shown that the carbon flux through glycolysis was the main route of glucose utilization, averaging ca. 80%. Inactivation of EDP did not affect growth parameters. Nevertheless, it altered carbon fluxes through the tricarboxylic acid cycles and energy metabolism in the cell. Inactivation of PPP decreased growth rate to a lesser degree than glycolysis inactivation.     

Engineering of a robust Escherichia coli chassis and exploitation for large-scale production processes

In large-scale bioprocesses microbes are exposed to heterogeneous substrate availability reducing the overall process performance. A series of deletion strains was constructed from E. coli MG1655 aiming for a robust phenotype in heterogeneous fermentations with transient starvation. Deletion targets were hand-picked based on a list of genes derived from previous large-scale simulation runs. Each gene deletion was conducted on the premise of strict neutrality towards growth parameters in glucose minimal medium. The final strain of the series, named E. coli RM214, was cultivated continuously in an STR-PFR (stirred tank reactor – plug flow reactor) scale-down reactor. The scale-down reactor system simulated repeated passages through a glucose starvation zone. When exposed to nutrient gradients, E. coli RM214 had a significantly lower maintenance coefficient than E. coli MG1655 (Δm_s = 0.038 g_Glucose/g_CDW/h, p < 0.05). In an exemplary protein production scenario E. coli RM214 remained significantly more productive than E. coli MG1655 reaching 44% higher eGFP yield after 28 h of STR-PFR cultivation. This study developed E. coli RM214 as a robust chassis strain and demonstrated the feasibility of engineering microbial hosts for large-scale applications.     

Adaptation of Escherichia coli to Elevated Sodium Concentrations Increases Cation Tolerance and Enables Greater Lactic Acid Production

Adaptive evolution was employed to generate sodium (Na⁺)-tolerant mutants of Escherichia coli MG1655. Four mutants with elevated sodium tolerance, designated ALS1184, ALS1185, ALS1186, and ALS1187, were independently isolated after 73 days of serial transfer in medium containing progressively greater Na⁺ concentrations. The isolates also showed increased tolerance of K⁺, although this cation was not used for selective pressure. None of the adapted mutants showed increased tolerance to the nonionic osmolyte sucrose. Several physiological parameters of E. coli MG1655 and ALS1187, the isolate with the greatest Na⁺ tolerance, were calculated and compared using glucose-limited chemostats. Genome sequencing showed that the ALS1187 isolate contained mutations in five genes, emrR, hfq, kil, rpsG, and sspA, all of which could potentially affect the ability of E. coli to tolerate Na⁺. Two of these genes, hfq and sspA, are known to be involved in global regulatory processes that help cells endure a variety of cellular stresses. Pyruvate formate lyase knockouts were constructed in strains MG1655 and ALS1187 to determine whether increased Na⁺ tolerance afforded increased anaerobic generation of lactate. In fed-batch fermentations, E. coli ALS1187 pflB generated 76.2 g/liter lactate compared to MG1655 pflB, which generated only 56.3 g/liter lactate.     

Development of a Biofilm Production-Deficient Escherichia coli Strain as a Host for Biotechnological Applications

Bacteria form biofilms by adhering to biotic or abiotic surfaces. This phenomenon causes several problems, including a reduction in the transport of mass and heat, an increase in resistance to antibiotics, and a shortening of the lifetimes of modules in bioindustrial fermentors. To overcome these difficulties, we created a biofilm production-deficient Escherichia coli strain, BD123, by deleting genes involved in curli biosynthesis and assembly, Δ(csgG-csgC); colanic acid biosynthesis and assembly, Δ(wcaL-wza); and type I pilus biosynthesis, Δ(fimB-fimH). E. coli BD123 remained mostly in the form of planktonic cells under the conditions tested and became more sensitive to the antibiotics streptomycin and rifampin than the wild-type E. coli MG1655: the growth of BD123 was inhibited by one-fourth of the concentrations needed to inhibit MG1655. In addition, the transformation efficiency of BD123 was about 20 times higher than that of MG1655, and the production and secretion of recombinant proteins were ~16% and ~25% greater, respectively, with BD123 than with MG1655. These results indicate that the newly created biofilm production-deficient strain of E. coli displays several key properties that substantially enhance its utility in the biotechnology arena.     

Identification and Validation of Novel Chromosomal Integration and Expression Loci in Escherichia coli Flagellar Region 1

Escherichia coli is used as a chassis for a number of Synthetic Biology applications. The lack of suitable chromosomal integration and expression loci is among the main hurdles of the E. coli engineering efforts. We identified and validated chromosomal integration and expression target sites within E. coli K12 MG1655 flagellar region 1. We analyzed five open reading frames of the flagellar region 1, flgA, flgF, flgG, flgI, and flgJ, that are well-conserved among commonly-used E. coli strains, such as MG1655, W3110, DH10B and BL21-DE3. The efficiency of the integration into the E. coli chromosome and the expression of the introduced genetic circuit at the investigated loci varied significantly. The integrations did not have a negative impact on growth; however, they completely abolished motility. From the investigated E. coli K12 MG1655 flagellar region 1, flgA and flgG are the most suitable chromosomal integration and expression loci.     

Construction of the new <Emphasis Type="Italic">Escherichia coli</Emphasis> K-12 MG 1655 novel strain with improved growth characteristics for application in metabolic engineering

MG1655 of Escherichia coli K-12 is frequently used in metabolic engineering as the wild-type strain. However, its two mutations, ilvG and rph-1 provide a negative effect on culture growth. The “polar effect” of rph-1 decreases the level of pyrE expression, causing partial auxotrophy for pyrimidines. Mutation ilvG leading to the appearance of Val^S phenotype causes retardation of cell growth rate on media containing amino acids. In this work, the substitution of two loci in the genome of MG1655 with the recovery of the wild-type phenotype was accomplished. Gene rph ^wt from the chromosome of E. coli TG1 was marked via Red-dependent integration of DNA fragment carrying λattL-Cm^R-λattR and transduced with phage P1 into MG1655; later, the Cm^R marker was removed with the use of λXis/Int recombinase. Parallel to this procedure, a spontaneous Val^R mutant of E. coli MG1655 yielding colonies of maximal size on M9 medium with glucose in the presence of L-Val (50 μg/ml) was isolated. It was shown that a nucleotide deletion in the isolated Val^R strain had been generated in the region of the identified ilvG mutation, which led to the recovery of the reading frame and active protein synthesis. This mutation named ilvG-15, which is the only reason for the Val^R phenotype in the obtained strain, was transferred to MG1655-rph ^wt using cotransduction, by analogy to the transfer of rph ^wt. Evaluation of rates of aerobically growing cells (μ, hour-1) on M9 medium with glucose produced the following values: 0.56, 0.69, and 0.73 for strains MG1655,MG1655-rph ^wt, and MG1655-(rph ^wt, ilvG-15), respectively.     

Improvement of fatty acid biosynthesis by engineered recombinant Escherichia coli

The purpose of this research was to develop new strains of Escherichia coli with improved fatty acid biosynthesis. β-Ketoacyl acyl carrier protein synthase III (fabH) catalyzes the first step in the synthesis of fatty acids in parallel with acetyl-CoA carboxylase (accABC) and malonyl-CoA: acyl carrier protein transacylase (fabD) in Escherichia coli K-12 MG1655. The enzyme encoded by the fabH gene leads to an increase in the synthesis of short-chain-length fatty acids and a strong preference for acetyl-CoA, as it produces only straight chain fatty acids (SCFAs). It also seems to play a role in determining the type and composition of fatty acids produced. In this study, metabolically engineered strains of E. coli K-12 MG1655 containing fabH or accA::accBC::fabD or accA::accBC:: fabD::fabH gene-inserted expression vector (pTrc99A) were constructed. To observe the effects of overexpression, the production of malonic acid, a pathway intermediate, and fatty acids was analyzed. The resulting recombinant strains produced total lipids up to approximately 1.2 ～ 1.6 fold higher than that of wild-type E. coli. The production of hexadecanoic acid was especially enhanced up to approximately 4.8 fold in E. coli SGJS13 as compared to E. coli SGJS11.     

Expression of Pyruvate Carboxylase Enhances Succinate Production in Escherichia coli without Affecting Glucose Uptake

Plasmids carrying the pyc gene from Rhizobium etli were used to express pyruvate carboxylase in Escherichia coli. Results of batch fermentations of a wild-type E. coli (MG1655), this wild-type with the pUC18 cloning/expression vector (MG1655/pUC18) and this wild-type carrying the pyc gene (MG1655/pUC18-pyc) were compared in glucose-limited medium. The results indicate that the final succinate concentration upon complete glucose utilization was increased from 1.18 g/L to 1.77 g/L by the expression of pyc, while the final succinate concentration in MG1655/pUC18 was slightly lower than in the parent strain. This increased succinate concentration came at the expense of lactate synthesis, whose final concentration decreased from 2.33 g/L to 1.88 g/L. The expression of pyc did not affect the maximum glucose uptake (2.17 g/Lh for MG1655 versus 2.47 g/Lh for MG1655/pUC18-pyc), but did decrease the maximum rate of cell mass production (0.213 g/Lh for MG1655, 0.169 g/Lh for MG1655/pUC18 and 0.199 g/Lh for MG1655/pUC18-pyc).     

Development of Escherichia coli MG1655 strains to produce long chain fatty acids by engineering fatty acid synthesis (FAS) metabolism

The goal of this research was to develop recombinant Escherichia coli to improve fatty acid synthesis (FAS). Genes encoding acetyl-CoA carboxylase (accA, accB, accC), malonyl-CoA-[acyl-carrier-protein] transacylase (fabD), and acyl-acyl carrier protein thioesterase (EC 3.1.2.14 gene), which are all enzymes that catalyze key steps in the synthesis of fatty acids, were cloned and over-expressed in E. coli MG1655. The acetyl-CoA carboxylase (ACC) enzyme catalyzes the addition of CO₂ to acetyl-CoA to generate malonyl-CoA. The enzyme encoded by the fabD gene converts malonyl-CoA to malonyl-[acp], and the EC 3.1.2.14 gene converts fatty acyl-ACP chains to long chain fatty acids. All the genes except for the EC 3.1.2.14 gene were homologous to E. coli genes and were used to improve the enzymatic activities to over-express components of the FAS pathway through metabolic engineering. All recombinant E. coli MG1655 strains containing various gene combinations were developed using the pTrc99A expression vector. To observe changes in metabolism, the in vitro metabolites and fatty acids produced by the recombinants were analyzed. The fatty acids (C16) from recombinant strains were produced 1.23-2.41 times higher than that from the wild type.     

Comparative genomic hybridization detects secondary chromosomal deletions in Escherichia coli K-12 MG1655 mutants and highlights instability in the flhDC region

The use of whole-genome microarrays for monitoring mutagenized or otherwise engineered genetic derivatives is a potentially powerful tool for checking genomic integrity. Using comparative genomic hybridization of a number of unrelated, directed deletion mutants in Escherichia coli K-12 MG1655, we identified unintended secondary genomic deletions in the flhDC region in Δfnr, Δcrp, and ΔcreB mutants. These deletions were confirmed by PCR and phenotypic tests. Our findings show that nonmotile progeny are found in some MG1655 directed deletion mutants, and studies on the effects of gene knockouts should be viewed with caution when the mutants have not been screened for the presence of secondary deletions or confirmed by other methods.     

The Evolution of an Osmotically Inducible dps in the Genus Streptomyces

Dps proteins are found almost ubiquitously in bacterial genomes and there is now an appreciation of their multifaceted roles in various stress responses. Previous studies have shown that this family of proteins assemble into dodecamers and their quaternary structure is entirely critical to their function. Moreover, the numbers of dps genes per bacterial genome is variable; even amongst closely related species - however, for many genera this enigma is yet to be satisfactorily explained. We reconstruct the most probable evolutionary history of Dps in Streptomyces genomes. Typically, these bacteria encode for more than one Dps protein. We offer the explanation that variation in the number of dps per genome among closely related Streptomyces can be explained by gene duplication or lateral acquisition, and the former preceded a subsequent shift in expression patterns for one of the resultant paralogs. We show that the genome of S. coelicolor encodes for three Dps proteins including a tailless Dps. Our in vivo observations show that the tailless protein, unlike the other two Dps in S. coelicolor, does not readily oligomerise. Phylogenetic and bioinformatic analyses combined with expression studies indicate that in several Streptomyces species at least one Dps is significantly over-expressed during osmotic shock, but the identity of the ortholog varies. In silico analysis of dps promoter regions coupled with gene expression studies of duplicated dps genes shows that paralogous gene pairs are expressed differentially and this correlates with the presence of a sigB promoter. Lastly, we identify a rare novel clade of Dps and show that a representative of these proteins in S. coelicolor possesses a dodecameric quaternary structure of high stability.     

Laboratory metabolic evolution improves acetate tolerance and growth on acetate of ethanologenic Escherichia coli under non-aerated conditions in glucose-mineral medium

In this work, Escherichia coli MG1655 was engineered to produce ethanol and evolved in a laboratory process to obtain an acetate tolerant strain called MS04 (E. coli MG1655: ΔpflB, ΔadhE, ΔfrdA, ΔxylFGH, ΔldhA, PpflB::pdc _Zm -adhB _Zm , evolved). The growth and ethanol production kinetics of strain MS04 were determined in mineral medium, mainly under non-aerated conditions, supplemented with glucose in the presence of different concentrations of sodium acetate at pH?7.0 and at different values of acid pH and a constant concentration of sodium acetate (2?g/l). Results revealed an increase in the specific growth rate, cell mass formation, and ethanol volumetric productivity at moderate concentrations of sodium acetate (2–10?g/l), in addition to a high tolerance to acetate because it was able to grow and produce a high yield of ethanol in the presence of up to 40?g/l of sodium acetate. Genomic analysis of the ΔpflB evolved strain identified that a chromosomal deletion of 27.3?kb generates the improved growth and acetate tolerance in MG1655 ΔpflB derivative strains. This deletion comprises genes related to the respiration of nitrate, repair of alkylated DNA and synthesis of the ompC gene coding for porin C, cytochromes C, thiamine, and colonic acid. Strain MS04 is advantageous for the production of ethanol from hemicellulosic hydrolysates that contain acetate.     

Improving poly-3-hydroxybutyrate production in Escherichia coli by combining the increase in the NADPH pool and acetyl-CoA availability

The biosynthesis of poly-3-hydroxybutyrate (P3HB), a biodegradable bio-plastic, requires acetyl-CoA as precursor and NADPH as cofactor. Escherichia coli has been used as a heterologous production model for P3HB, but metabolic pathway analysis shows a deficiency in maintaining high levels of NADPH and that the acetyl-CoA is mainly converted to acetic acid by native pathways. In this work the pool of NADPH was increased 1.7-fold in E. coli MG1655 through plasmid overexpression of the NADP⁺-dependent glyceraldehyde 3-phosphate dehydrogenase gene (gapN) from Streptococcus mutans (pTrcgapN). Additionally, by deleting the main acetate production pathway (ackA-pta), the acetic acid production was abolished, thus increasing the acetyl-CoA pool. The P3HB biosynthetic pathway was heterologously expressed in strain MG1655 Δack-pta/pTrcgapN, using an IPTG inducible vector with the P3HB operon from Azotobacter vinelandii (pPHB _Av ). Cultures were performed in controlled fermentors using mineral medium with glucose as the carbon source. Accordingly, the mass yield of P3HB on glucose increased to 73 % of the maximum theoretical and was 30 % higher when compared to the progenitor strain (MG1655/pPHB _Av ). In comparison with the wild type strain expressing pPHB _Av , the specific accumulation of PHB (g_PHB/g_DCW) in MG1655 Δack-pta/pTrcgapN/pPHB _Av increased twofold, indicating that as the availability of NADPH is raised and the production of acetate abolished, a P3HB intracellular accumulation of up to 84 % of the E. coli dry weight is attainable.     

Motility influences biofilm architecture in Escherichia coli

Eight Escherichia coli strains were studied in minimal medium with a continuous flow system using confocal microscopy. K12 wild-type strains ATCC 25404 and MG1655 formed the best biofilms (∼43 μm thick, 21 to 34% surface coverage). JM109, DH5α, and MG1655 motA formed intermediate biofilms (∼13 μm thick, 41 to 58% surface coverage). BW25113, MG1655 qseB, and MG1655 fliA had poor biofilms (surface coverage less than 5%). The best biofilm-formers, ATCC 25404 and MG1655, displayed the highest motility, whereas the worst biofilm former, BW25113, was motility-impaired. The differences in motility were due to differences in expression of the motility loci qseB, flhD, fliA, fliC, and motA (e.g., qseB expression in MG1655 was 139-fold higher than BW25113 and 209-fold higher than JM109). Motility affected the biofilm architecture as those strains which had poor motility (E. coli JM109, E. coli MG1655 motA, and DH5α) formed flatter microcolonies compared with MG1655 and ATCC 25404, which had more dramatic vertical structures as a result of their enhanced motility. The presence of flagella was also found to be important as qseB and fliA mutants (which lack flagella) had less biofilm than the isogenic paralyzed motA strain (threefold less thickness and 15-fold less surface coverage).