Biohydrogen production from microalgae—Major bottlenecks and future research perspectives

The imprudent use of fossil fuels has resulted in high greenhouse gas (GHG) emissions, leading to climate change and global warming. Reduction in GHG emissions and energy insecurity imposed by the depleting fossil fuel reserves led to the search for alternative sustainable fuels. Hydrogen is a potential alternative energy carrier and is of particular interest because hydrogen combustion releases only water. Hydrogen is also an important industrial feedstock. As an alternative energy carrier, hydrogen can be used in fuel cells for power generation. Current hydrogen production mainly relies on fossil fuels and is usually energy and CO₂-emission intensive, thus the use of fossil fuel-derived hydrogen as a carbon-free fuel source is fallacious. Biohydrogen production can be achieved via microbial methods, and the use of microalgae for hydrogen production is outstanding due to the carbon mitigating effects and the utilization of solar energy as an energy source by microalgae. This review provides comprehensive information on the mechanisms of hydrogen production by microalgae and the enzymes involved. The major challenges in the commercialization of microalgae-based photobiological hydrogen production are critically analyzed and future research perspectives are discussed. Life cycle analysis and economic assessment of hydrogen production by microalgae are also presented.     

Microbiological and engineering aspects of biohydrogen production

Dramatically rising oil prices and increasing awareness of the dire environmental consequences of fossil fuel use, including startling effects of climate change, are refocusing attention worldwide on the search for alternative fuels. Hydrogen is poised to become an important future energy carrier. Renewable hydrogen production is pivotal in making it a truly sustainable replacement for fossil fuels, and for realizing its full potential in reducing greenhouse gas emissions. One attractive option is to produce hydrogen through microbial fermentation. This process would use readily available wastes as well as presently unutilized bioresources, including enormous supplies of agricultural and forestry wastes. These potential energy sources are currently not well exploited, and in addition, pose environmental problems. However, fuels are relatively low value products, placing severe constraints on any production process. Therefore, means must be sought to maximize yields and rates of hydrogen production while at the same time minimizing energy and capital inputs to the bioprocess. Here we review the various attributes of the characterized hydrogen producing bacteria as well as the preparation and properties of mixed microflora that have been shown to convert various substrates to hydrogen. Factors affecting yields and rates are highlighted and some avenues for increasing these parameters are explored. On the engineering side, we review the potential waste pre-treatment technologies and discuss the relevant bioprocess parameters, possible reactor configurations, including emerging technologies, and how engineering design-directed research might provide insight into the exploitation of the significant energy potential of biomass resources.     

Traversing the mountaintop: world fossil fuel production to 2050

During the past century, fossil fuels—petroleum liquids, natural gas and coal—were the dominant source of world energy production. From 1950 to 2005, fossil fuels provided 85–93% of all energy production. All fossil fuels grew substantially during this period, their combined growth exceeding the increase in world population. This growth, however, was irregular, providing for rapidly growing per capita production from 1950 to 1980, stable per capita production from 1980 to 2000 and rising per capita production again after 2000. During the past half century, growth in fossil fuel production was essentially limited by energy demand. During the next half century, fossil fuel production will be limited primarily by the amount and characteristics of remaining fossil fuel resources. Three possible scenarios—low, medium and high—are developed for the production of each of the fossil fuels to 2050. These scenarios differ primarily by the amount of ultimate resources estimated for each fossil fuel. Total fossil fuel production will continue to grow, but only slowly for the next 15–30 years. The subsequent peak plateau will last for 10–15 years. These production peaks are robust; none of the fossil fuels, even with highly optimistic resource estimates, is projected to keep growing beyond 2050. World fossil fuel production per capita will thus begin an irreversible decline between 2020 and 2030.     

Microalgal hydrogen production: prospects of an essential technology for a clean and sustainable energy economy

Modern energy production is required to undergo a dramatic transformation. It will have to replace fossil fuel use by a sustainable and clean energy economy while meeting the growing world energy needs. This review analyzes the current energy sector, available energy sources, and energy conversion technologies. Solar energy is the only energy source with the potential to fully replace fossil fuels, and hydrogen is a crucial energy carrier for ensuring energy availability across the globe. The importance of photosynthetic hydrogen production for a solar-powered hydrogen economy is highlighted and the development and potential of this technology are discussed. Much successful research for improved photosynthetic hydrogen production under laboratory conditions has been reported, and attempts are underway to develop upscale systems. We suggest that a process of integrating these achievements into one system to strive for efficient sustainable energy conversion is already justified. Pursuing this goal may lead to a mature technology for industrial deployment.     

Metabolic engineering for the optimization of hydrogen production in Escherichia coli: A review

Hydrogen is a potential sustainable energy source and it could become an alternative to fossil fuel combustion, thus helping to reduce greenhouse gas emissions. The biological production of hydrogen, instead of its chemical synthesis, is a promising possibility since this process requires less energy and is more sustainable and eco-friendly. Several microorganisms have been used for this purpose, but Escherichia coli is one of the most widely used in this field. The literature in this area has increased exponentially in the last 10 years and several strategies have been reported in an effort to improve hydrogen production. In this work, the stay of the art of hydrogen biosynthesis by E. coli and metabolic engineering strategies to enhance hydrogen production are reviewed. This work includes a discussion about the hydrogenase complexes responsible for the hydrogen synthesis in this microorganism and the central carbon metabolism pathways connected to this process. The main metabolic engineering strategies applied are discussed, including heterologous gene expression, adaptive evolution and metabolic and protein engineering. On the other hand, culture conditions, including the use of carbon sources such as glycerol, glucose or organic wastes, have also been considered. Yields and productivities of the most relevant engineered strains reported using several carbon sources are also compared.     

Mining genomic databases to identify novel hydrogen producers

The realization that fossil fuel reserves are limited and their adverse effect on the environment has forced us to look into alternative sources of energy. Hydrogen is a strong contender as a future fuel. Biological hydrogen production ranges from 0.37 to 3.3 moles H(2) per mole of glucose and, considering the high theoretical values of production (4.0 moles H(2) per mole of glucose), it is worth exploring approaches to increase hydrogen yields. Screening the untapped microbial population is a promising possibility. Sequence analysis and pathway alignment of hydrogen metabolism in complete and incomplete genomes has led to the identification of potential hydrogen producers.     

Energy production from biomass (Part 2): Conversion technologies

The use of biomass to provide energy has been fundamental to the development of civilisation. In recent times pressures on the global environment have led to calls for an increased use of renewable energy sources, in lieu of fossil fuels. Biomass is one potential source of renewable energy and the conversion of plant material into a suitable form of energy, usually electricity or as a fuel for an internal combustion engine, can be achieved using a number of different routes, each with specific pros and cons. A brief review of the main conversion processes is presented, with specific regard to the production of a fuel suitable for spark ignition gas engines.     

Assessing future energy and transport systems: the case of fuel cells

Goal, Scope and Background  Assessing future energy and transport systems is of major importance for providing timely information for decision makers. In the discussion of technology options, fuel cells are often portrayed as attractive options for power plants and automotive applications. However, when analysing these systems, the LCA analyst is confronted with methodological problems, particularly with data gaps and the requirement of forecasting and anticipation of future developments. This series of two papers aims at providing a methodological framework for assessing future energy and transport systems (Part 1) and applies this to the two major application areas of fuel cells (Part 2). Methods  To allow the LCA of future energy and transport systems, forecasting tools like, amongst others, cost estimation methods and process simulation of systems are investigated with respect to the applicability in LCAs of future systems (Part 1). The manufacturing process of an SOFC stack is used as an illustration for the forecasting procedure. In Part 2, detailed LCAs of fuel cell power plants and power trains are carried out including fuel (hydrogen, methanol, gasoline, diesel and natural gas) and energy converter production. To compare it with competing technologies, internal combustion engines (automotive applications) and reciprocating engines, gas turbines and combined cycle plants (stationary applications) are also analysed. Results and Discussion  Principally, the investigated forecasting methods are suitable for future energy system assessment. The selection of the best method depends on different factors such as required ressources, quality of the results and flexibility. In particular, the time horizon of the investigation determines which forecasting tool may be applied. Environmentally relevant process steps exhibiting a significant time dependency shall always be investigated using different independent forecasting tools to ensure stability of the results. The results of the LCA underline that, in general, fuel cells offer advantages in the impact categories usually dominated by pol-lutant emissions, such as acidification and eutrophication, whereas for global warming and primary energy demand, the situation depends on a set of parameters such as driving cycle and fuel economy ratio in mobile applications and thermal/total efficiencies in stationary applications. For the latter impact categories, the choice of the primary energy carrier for fuel production (renewable or fossil) dominates the impact reduction. With increasing efficiency and improving emission performance of the conventional systems, the competition in both mobile and stationary applications is getting even stronger. The production of the fuel cell system is of low overall significance in stationary applications, whereas in vehicles, the lower life-time of the vehicle leads to a much higher significance of the power train production. Recommendations and Perspectives  In future, rapid technological and energy economic development will bring further advances for both fuel cells and conventional energy converters. Therefore, LCAs at such an early stage of the market development can only be considered preliminary. It is an essential requirement to accompany the ongoing research and development with iterative LCAs, constantly pointing at environmental hot spots and bottlenecks.     

Bioconversion of natural gas to liquid fuel: Opportunities and challenges

Natural gas is a mixture of low molecular weight hydrocarbon gases that can be generated from either fossil or anthropogenic resources. Although natural gas is used as a transportation fuel, constraints in storage, relatively low energy content (MJ/L), and delivery have limited widespread adoption. Advanced utilization of natural gas has been explored for biofuel production by microorganisms. In recent years, the aerobic bioconversion of natural gas (or primarily the methane content of natural gas) into liquid fuels (Bio-GTL) by biocatalysts (methanotrophs) has gained increasing attention as a promising alternative for drop-in biofuel production. Methanotrophic bacteria are capable of converting methane into microbial lipids, which can in turn be converted into renewable diesel via a hydrotreating process. In this paper, biodiversity, catalytic properties and key enzymes and pathways of these microbes are summarized. Bioprocess technologies are discussed based upon existing literature, including cultivation conditions, fermentation modes, bioreactor design, and lipid extraction and upgrading. This review also outlines the potential of Bio-GTL using methane as an alternative carbon source as well as the major challenges and future research needs of microbial lipid accumulation derived from methane, key performance index, and techno-economic analysis. An analysis of raw material costs suggests that methane-derived diesel fuel has the potential to be competitive with petroleum-derived diesel.     

Assessing future energy and transport systems: the case of fuel cells

Goal, Scope and Background  Assessing future energy and transport systems is of major importance for providing timely information for decision makers. In the discussion of technology options, fuel cells are often portrayed as attractive options for power plants and automotive applications. However, when analysing these systems, the LCA analyst is confronted with methodological problems, particularly with data gaps and the requirement of an anticipation of future developments. This series of two papers aims at providing a methodological framework for assessing future energy and transport systems (Part 1) and applies this to the two major application areas of fuel cells (Part 2). Methods  To allow the LCA of future energy and transport systems forecasting tools like, amongst others, cost estimation methods and process simulation of systems are investigated with respect to the applicability in LCAs of future systems (Part 1). The manufacturing process of an SOFC stack is used as an illustration for the forecasting procedure. In Part 2, detailed LCAs of fuel cell power plants and power trains are carried out including fuel (hydrogen, methanol, gasoline, diesel and natural gas) and energy converter production. To compare it with competing technologies, internal combustion engines (automotive applications) and reciprocating engines, gas turbines and combined cycle plants (stationary applications) are analysed as well. Results and Discussion  Principally, the investigated forecasting methods are suitable for future energy system assessment. The selection of the best method depends on different factors such as required ressources, quality of the results and flexibility. In particular, the time horizon of the investigation determines which forecasting tool may be applied. Environmentally relevant process steps exhibiting a significant time dependency shall always be investigated using different independent forecasting tools to ensure stability of the results. The results of the LCA (Part 2) underline that principally, fuel cells offer advantages in the impact categories which are typically dominated by pollutant emissions, such as acidification and eutrophication, whereas for global warming and primary energy demand, the situation depends on a set of parameters such as driving cycle and fuel economy ratio in mobile applica-tions and thermal/total efficiencies in stationary applications. For the latter impact categories, the choice of the primary en-ergy carrier for fuel production (renewable or fossil) dominates the impact reduction. With increasing efficiency and improving emission performance of the conventional systems, the competition regarding all impact categories in both mobile and stationary applications is getting even stronger. The production of the fuel cell system is of low overall significance in stationary applications, whereas in automotive applications, the production of the fuel cell power train and required materials leads to increased impacts compared to internal combustion engines and thus reduces the achievable environmental impact reduction. Recommendations and Perspectives  The rapid technological and energy economic development will bring further advances for both fuel cells and conventional energy converters. Therefore, LCAs at such an early stage of the market development can only be considered preliminary. It is an essential requirement to accompany the ongoing research and development with iterative LCAs, constantly pointing at environmental hot spots and bottlenecks.     

Energy production from biomass (Part 1): Overview of biomass

The use of renewable energy sources is becoming increasingly necessary, if we are to achieve the changes required to address the impacts of global warming. Biomass is the most common form of renewable energy, widely used in the third world but until recently, less so in the Western world. Latterly much attention has been focused on identifying suitable biomass species, which can provide high-energy outputs, to replace conventional fossil fuel energy sources. The type of biomass required is largely determined by the energy conversion process and the form in which the energy is required. In the first of three papers, the background to biomass production (in a European climate) and plant properties is examined. In the second paper, energy conversion technologies are reviewed, with emphasis on the production of a gaseous fuel to supplement the gas derived from the landfilling of organic wastes (landfill gas) and used in gas engines to generate electricity. The potential of a restored landfill site to act as a biomass source, providing fuel to supplement landfill gas-fuelled power stations, is examined, together with a comparison of the economics of power production from purpose-grown biomass versus waste-biomass. The third paper considers particular gasification technologies and their potential for biomass gasification.     

Energy Structure and Energy Security under Climate Mitigation Scenarios in China

This study investigates how energy structure and energy security in China will change in the future under climate mitigation policy scenarios using Representative Concentration Pathways in a computable general equilibrium model. The findings suggest that to reduce greenhouse gas emissions, China needs to shift its energy structure from fossil fuel dominance to renewables and nuclear. The lower the allowable emissions, the larger the shifts required. Among fossil fuels, coal use particularly must significantly decrease. Such structural shifts will improve energy self-sufficiency, thus enhancing energy security. Under the policy scenarios, energy-source diversity as measured by the Herfindahl Index improves until 2050, after which diversity declines because of high dependence on a specific energy source (nuclear and biomass). Overall, however, it is revealed that energy security improves along with progress in climate mitigation. These improvements will also contribute to the economy by reducing energy procurement risks.     

生物质制氢技术研究进展

氢能以其清洁,来源广泛及用途广等优点成为最有希望的替代能源之一,用可再生能源制氢是氢能发展的必然趋势。由于生物质制氢具有一系列独特的优点,它已成为发展氢经济颇具前景的研究领域之一。生物质制氢技术可以分为两类,一类是以生物质为原料利用热物理化学方法制取氢气,如生物质气化制氢,超临界转化制氢,高温分解制氢等热化学发制氢,以及基于生物质的甲烷、甲醇、乙醇的化学重整转化制氢等;另一类是利用生物转化途径转换制氢,包括直接生物光解,间接生物光解,光发酵,光合异养细菌水气转移反应合成氢气,暗发酵和微生物燃料电池等技术。本文综述了目前主要的生物质制氢技术及其发展概况,并分析了各技术的发展趋势。     

Life cycle assessment of biofuels from Jatropha curcas in West Africa: a field study

In recent years, liquid biofuels for transport have benefited from significant political support due to their potential role in curbing climate change and reducing our dependence on fossil fuels. They may also participate to rural development by providing new markets for agricultural production. However, the growth of energy crops has raised concerns due to their high consumption of conventional fuels, fertilizers and pesticides, their impacts on ecosystems and their competition for arable land with food crops. Low-input species such as Jatropha curcas , a perennial, inedible crop well adapted to semiarid regions, has received much interest as a new alternative for biofuel production, minimizing adverse effects on the environment and food supply. Here, we used life-cycle assessment to quantify the benefits of J. curcas biofuel production in West Africa in terms of greenhouse gas emissions and fossil energy use, compared with fossil diesel fuel and other biofuels. Biodiesel from J. curcas has a much higher performance than current biofuels, relative to oil-derived diesel fuels. Under West Africa conditions, J. curcas biodiesel allows a 72% saving in greenhouse gas emissions compared with conventional diesel fuel, and its energy yield (the ratio of biodiesel energy output to fossil energy input) is 4.7. J. curcas production studied is eco-compatible for the impacts under consideration and fits into the context of sustainable development.     

Evolution of reaction center mimics to systems capable of generating solar fuel

Capturing and converting solar energy via artificial photosynthesis offers an ideal way to limit society’s dependence on fossil fuel and its myriad consequences. The development and study of molecular artificial photosynthetic reactions centers and antenna complexes and the combination of these constructs with catalysts to drive the photochemical production of a fuel helps to build the understanding needed for development of future scalable technologies. This review focuses on the study of molecular complexes, design of which is inspired by the components of natural photosynthesis, and covers research from early triad reaction centers developed by the group of Gust, Moore, and Moore to recent photoelectrochemical systems capable of using light to convert water to oxygen and hydrogen.     

Development and application of a two-tier multiple-choice diagnostic test for high school students’ understanding of cell division and reproduction

Department of Physiological Botany, Uppsala University, Uppsala, Sweden Hydrogen gas is regarded as a potential candidate for a future energy economy. Research and development in the field of hydrogen energy is greatly encouraged on all continents. A wide range of microorganisms are able to produce hydrogen gas, among them photosynthetically active organisms that use light as their sole energy source. These organisms are good candidates for the photobiological production of hydrogen gas. Green algae are of particular interest since they are capable of splitting water during photosynthesis and of releasing hydrogen gas under certain conditions. This article describes a small bioreactor that can be run in the classroom and used to demonstrate the concept of photohydrogen production.     

藻青菌产氢研究

目前全球都在寻找一种可替代化石燃料的能源物质。H_2作为能源是未来的希望。藻青菌是生物光合产氢具有很大前景的微生物。综述了藻青菌生物产氢的进展。     

Hydrogen production by photosynthetic green algae

Oxygenic photosynthetic organisms such as cyanobacteria, green algae and diatoms are capable of absorbing light and storing up to 10-13% of its energy into the H-H bond of hydrogen gas. This process, which takes advantage of the photosynthetic apparatus of these organisms to convert sunlight into chemical energy, could conceivably be harnessed for production of significant amounts of energy from a renewable resource, water. The harnessed energy could then be coupled to a fuel cell for electricity generation and recycling of water molecules. In this review, current biochemical understanding of this reaction in green algae, and some of the major challenges facing the development of future commercial algal photobiological systems for H2 production have been discussed.     

Fermentative hydrogen production from low-value substrates

Hydrogen is a promising energy source that is believed to replace the conventional energy sources e.g. fossil fuels over years. Hydrogen production methods can be divided into conventional production methods which depend mainly on fossil fuels and alternative production methods including electrolysis of water, biophotolysis and fermentation hydrogen production from organic waste materials. Compared to the conventional methods, the alternative hydrogen production methods are less energy intensive and negative-value substrates i.e. waste materials can be used to produce hydrogen. Among the alternative methods, fermentation process including dark and photo-fermentation has gained more attention because these processes are simple, waste materials can be utilized, and high hydrogen yields can be achieved. The fermentation process is affected by several parameters such as type of inoculum, pH, temperature, substrate type and concentration, hydraulic retention time, etc. In order to achieve optimum hydrogen yields and maximum substrate degradation, the operating conditions of the fermentation process must be optimized. In this review, two routes for biohydrogen production as dark and photo-fermentation are discussed. Dark/photo-fermentation technology is a new approach that can be used to increase the hydrogen yield and improve the energy recovery from organic wastes.     

Fermentative biohydrogen production: trends and perspectives

Biologically produced hydrogen (biohydrogen) is a valuable gas that is seen as a future energy carrier, since its utilization via combustion or fuel cells produces pure water. Heterotrophic fermentations for biohydrogen production are driven by a wide variety of microorganisms such as strict anaerobes, facultative anaerobes and aerobes kept under anoxic conditions. Substrates such as simple sugars, starch, cellulose, as well as diverse organic waste materials can be used for biohydrogen production. Various bioreactor types have been used and operated under batch and continuous conditions; substantial increases in hydrogen yields have been achieved through optimum design of the bioreactor and fermentation conditions. This review explores the research work carried out in fermentative hydrogen production using organic compounds as substrates. The review also presents the state of the art in novel molecular strategies to improve the hydrogen production.