Translational coupling to an upstream gene promotes folding of the mycobacterial plasmid pAL5000 replication protein RepB and thereby its origin binding activity

In the mycobacterial plasmid pAL5000 replication region, the replication genes repA and repB are organized in an operon. Earlier, a RepB-dependent origin binding activity was detected in Escherichia coli cells expressing the repA-repB operon. This activity was maximal when expression of the two genes was coupled (A. Basu, M. Chawla-Sarkar, S. Chakrabarti, and S. K. Das Gupta, J. Bacteriol. 184:2204-2214, 2002). In this study we have shown that translational coupling makes a significant difference in the structure and function of RepB. When repB expression was coupled to repA, the polypeptide folded into an active structure (referred to as RepB*), which possessed higher helical content than RepB expressed independently. RepB* could also be distinguished from the less active RepB on the basis of sensitivity to OmpT, an outer membrane protease of E. coli: RepB* was sensitive to the protease, whereas RepB was resistant. Similar conformational differences between RepB* and RepB could be observed when repA was replaced with an unrelated gene, malE (encoding maltose binding protein). These results show that translational coupling of repB to an upstream gene is necessary for better folding and origin binding activity. It is speculated that in coupled systems where translation machinery is passed on from the upstream to the downstream open reading frame, cotranslational folding of the polypeptide expressed from the downstream open reading frame is enhanced due to increased folding competence of translationally primed ribosomes.     

Protein-DNA interactions in the ori region of the Mycobacterium fortuitum plasmid pAL5000.

Plasmid pAL5000 from Mycobacterium fortuitum encodes two proteins necessary for replication: RepA (307 amino acid residues) and RepB (119 residues). A single RNA species encoding these proteins was characterized, and its 5' end was defined. The proteins were expressed as maltose-binding protein fusions in Escherichia coli. The RepB protein was shown in vitro to bind specifically to a previously defined 435-bp region of pAL5000 containing the origin of replication (ori). The precise RepB binding sites were defined by DNase I footprinting experiments. RepB binds to two motifs in the ori region: a high-affinity site within its own promoter region, implying autoregulation of its expression, and a low-affinity site further upstream, presumably the origin of replication itself. The binding to the latter motif seems to occur on one DNA strand only. The high-affinity binding site contains several palindromic sequences. Gel retardation assays were performed with the different binding sites as templates, and the binding constant to each site was estimated from protein titrations. This is the first molecular dissection of mycobacterial DNA-binding proteins and their interactions with their targets.     

Identification of the partitioning site within the repABC-type replicon of the composite Paracoccus versutus plasmid pTAV1

The replicator region of composite plasmid pTAV1 of Paracoccus versutus (included in mini-replicon pTAV320) belongs to the family of repABC replicons commonly found in plasmids harbored by Agrobacterium and Rhizobium spp. The repABC replicons encode three genes clustered in an operon, which are involved in partitioning (repA and repB) and replication (repC). In order to localize the partitioning site of pTAV320, the two identified incompatibility determinants of this mini-replicon (inc1, located in the intergenic sequence between repB and repC; and inc2, situated downstream of the repC gene) were PCR amplified and used together with purified RepB fusion protein (homologous to the type B partitioning proteins binding to the partitioning sites) in an electrophoretic mobility shift assay. The protein bound only inc2, forming two complexes in a protein concentration-dependent manner. The inc2 region contains two long (14-bp) repeated sequences (R1 and R2). Disruption of these sequences completely eliminates RepB binding ability. R1 and R2 have sequence similarities with analogous repeats of another repABC replicon of plasmid pPAN1 of Paracoccus pantotrophus DSM 82.5 and with centromeric sequences of the Bacillus subtilis chromosome. Excess RepB protein resulted in destabilization of the inc2-containing plasmid in Escherichia coli. On the other hand, the inc2 region could stabilize another unstable replicon in P. versutus when RepA and RepB were delivered in trans, proving that this region has centromere-like activity. Thus, it was demonstrated that repA, repB, and inc2 constitute a functional system for active partitioning of pTAV320.     

Gene replacement in mycobacteria by using incompatible plasmids

A simple and efficient delivery system was developed for making targeted gene knockouts in Mycobacterium smegmatis. This delivery system relies on the use of a pair of replicating plasmids, which are incompatible. Incompatible plasmids share elements of the same replication machinery and so compete with each other during both replication and partitioning into daughter cells. Such plasmids can be maintained together in the presence of antibiotics; however, removal of selection leads to the loss of one or both plasmids. For mutagenesis, two replicating plasmids based on pAL5000 are introduced; one of these plasmids carries a mutated allele of the targeted gene. Homologous recombination is allowed to take place, and either one or both of the vectors are lost through the pressure of incompatibility, allowing the phenotypic effects of the mutant to be studied. Several different plasmid combinations were tested to optimize loss in the absence of antibiotic selection. pAL5000 carries two replication genes (repA and repB), which act in trans, and the use of vectors that each lack one rep gene and complement each other resulted in the loss of both plasmids in M. smegmatis and Mycobacterium bovis BCG. The rate of loss was increased by the incorporation of an additional incompatibility region in one of the plasmids. To facilitate cloning when the system was used, we constructed plasmid vector pairs that allow simple addition of selection and screening genes on flexible gene cassettes. Using this system, we demonstrated that M. smegmatis pyrF mutants could be isolated at high frequency. This method should also be useful in other species in which pAL5000 replicates, including Mycobacterium tuberculosis.     

Induced bending of plasmid pLS1 DNA by the plasmid-encoded protein RepA

The broad host range streptococcal plasmid pLS1 encodes for a 5.1-kDa repressor protein, RepA. This protein has affinity for DNA (linear or supercoiled) and is translated from the same mRNA as the replication initiator protein RepB. By gel retardation assays, we observed that RepA shows specificity for binding to the plasmid HinfID fragment, which includes the target of the protein. The target of RepA within the plasmid DNA molecule has been located around the plasmid single site ApaLI. This site is included in a region that contains the promoter for the repA and repB genes and is contiguous to the plasmid ori(+). A complex sequence-directed DNA curvature is observed in this region of pLS1. Upon addition of RepA to plasmid linear DNA or to circularly permuted restriction fragments, this intrinsic curvature was greatly enhanced. Thus, a strong RepA-induced bending could be located in the vicinity of the ApaLI site. Visualization of the bent DNA was achieved by electron microscopy of complexes between RepA and plasmid DNA fragments containing the RepA target.     

Transposition-induced structural instability of Escherichia coli-mycobacteria shuttle vectors

Escherichia coli-mycobacteria shuttle vectors, derived from pAL5000 (a mycobacterial plasmid) and pUC19, were frequently found to undergo structural alterations due to transposition of IS1096, a Mycobacterium smegmatis transposable element, at a cluster of sites located within a small region of 60 bp, immediately upstream of a kanamycin resistance gene present in these vectors. The structural alterations led to deletion of large regions of the vector which, in several cases, were found to extend into the ORF2 (RepB) coding sequences of the pAL5000 replication region without affecting its replication capability. This suggests that the entire ORF2 coding sequences of the pAL5000 replication region may not be essential for replication of pAL5000-derived vectors. The deletion derivatives, which contain the minimal sequences required for replication and selection in mycobacteria, were found to be structurally stable and therefore these could be potentially used as stable vector systems for the transformation of mycobacteria.     

Futile attempts to differentiate provide molecular evidence for individual differences within a population of cells during cellular reprogramming

A cryptic plasmid from Arthrobacter rhombi PRH1, designated as pPRH, was sequenced and characterized. It was 5000 bp in length with a G+C content of 66 mol%. The plasmid pPRH was predicted to encode six putative open reading frames (ORFs), in which ORF2 and ORF3 formed the minimal replicon of plasmid pPRH and shared 55-61% and 60-69% homology, respectively, with the RepA and RepB proteins of reported rhodococcal plasmids. Sequence analysis revealed a typical ColE2-type ori located 45 bp upstream of the gene repA. Sequence and phylogenetic analysis led to the conclusion that pPRH is a representative of a novel group of pAL5000 subfamily of ColE2 family plasmids. Three shuttle vectors pRMU824, pRMU824Km and pRMU824Tc, encoding chloramphenicol resistance, were constructed. The latter two harboured additional antibiotic resistance genes kan and tet, respectively. All vectors successfully replicated in Escherichia coli, Arthrobacter and Rhodococcus spp. The vector pRMU824Km was employed for functional screening of 2-hydroxypyridine catabolism encoding genes from Arthrobacter sp. PY22. Sequence analysis of the cloned 6-kb DNA fragment revealed eight putative ORFs, among which hpyB gene encoded a putative monooxygenase.     

Pseudoknot-dependent translational coupling in repBA genes of the IncB plasmid pMU720 involves reinitiation

Replication of the IncB miniplasmid pMU720 requires synthesis of the replication initiator protein, RepA, whose translation is coupled to that of a leader peptide, RepB. The unusual feature of this system is that translational coupling in repBA has to be activated by the formation of a pseudoknot immediately upstream of the repA Shine-Dalgarno sequence. A small antisense RNA, RNAI, controls replication of pMU720 by interacting with repBA mRNA to inhibit expression of repA both directly, by preventing formation of the pseudoknot, and indirectly, by inhibiting translation of repB. The mechanism of translational coupling in repBA was investigated using the specialized ribosome system, which directs a subpopulation of ribosomes that carry an altered anti-Shine-Dalgarno sequence to translate mRNA molecules whose Shine-Dalgarno sequences have been altered to be complementary to the mutant anti-Shine-Dalgarno sequence. Our data indicate that translation of repA involves reinitiation by the ribosome that has terminated translation of repB. The role of the pseudoknot in this process and its effect on the control of copy number in pMU720 are discussed.     

Molecular organization of the minimal replicon of novel, narrow-host-range, lactococcal plasmid pCI305

Plasmid pCI305 is an 8.7-kb, narrow-host-range, cryptic plasmid originating from Lactococcus lactis subsp. lactis UC317. The nucleotide sequence of the pCI305 replication region was determined. A single open reading frame of 1158 bp was identified in the trans-active domain repB. The size of the predicted repB protein (46 kDa) is in close agreement with the size of the repB product visualized in vivo in Escherichia coli when repB was placed under control of the inducible phi T7 RNA polymerase promoter. In vivo substitution of the native repB promoter sequence with a Tn5-derived promoter sequence was demonstrated. repA, a 344-bp cis-acting region which is the probable pCI305 replication origin region, was noncoding, was AT-rich, and possessed a unique set of inverted and direct repeat sequences. No significant homology between repA or repB and other gram-positive replication regions was evident. Combined with the absence of a detectable single-stranded DNA intermediate during replication, these results indicate that the pCI305 replication region differs markedly from most gram-positive replicons examined to date. The presence on other lactococcal plasmids of replication regions related to that of pCI305 was demonstrated.     

Identification of a megaplasmid centromere reveals genetic structural diversity within the repABC family of basic replicons

The basic replication unit of many plasmids and second chromosomes in the alpha-proteobacteria consists of a repABC locus that encodes the trans- and cis-acting components required for both semiautonomous replication and replicon maintenance in a cell population. In terms of physical genetic organization and at the nucleotide sequence level, repABC loci are well conserved across various genera. As with all repABC-type replicons that have been genetically characterized, the 1.4 Mb pSymA and 1.7 Mb pSymB megaplasmids from the plant endosymbiont Sinorhizobium meliloti encode strong incompatibility (inc) determinants. We have identified a novel inc sequence upstream of the repA2 gene in pSymA that is not present on pSymB and not reported in other repABC plasmids that have been characterized. This region, in concert with the repA and repB genes, stabilizes a test plasmid indicating that it constitutes a partitioning (par) system for the megaplasmid. Purified RepB binds to this sequence and binding may be enhanced by RepA. We have isolated 19 point mutations that eliminate incompatibility, reduce RepB binding or the stabilization phenotype associated with this sequence and all of these map to a 16-nucleotide palindromic sequence centred 330 bp upstream of the repA2 gene. An additional five near-perfect repeats of this palindrome are located further upstream of the repA2 gene and we show that they share some conservation with known RepB binding sites in different locations on other repABC plasmids and to two sequences found on the tumour inducing plasmid of Agrobacterium tumefaciens. These additional palindromes also bind RepB but one of them does not display obvious incompatibility effects. A heterogenic distribution of par sequences demonstrates unexpected diversity in the structural genetic organization of repABC loci, despite their obvious levels of similarity.     

Structural elements required for replication and incompatibility of the Rhizobium etli symbiotic plasmid

The symbiotic plasmid of Rhizobium etli CE3 belongs to the RepABC family of plasmid replicons. This family is characterized by the presence of three conserved genes, repA, repB, and repC, encoded by the same DNA strand. A long intergenic sequence (igs) between repB and repC is also conserved in all members of the plasmid family. In this paper we demonstrate that (i) the repABC genes are organized in an operon; (ii) the RepC product is essential for replication; (iii) RepA and RepB products participate in plasmid segregation and in the regulation of plasmid copy number; (iv) there are two cis-acting incompatibility regions, one located in the igs (incalpha) and the other downstream of repC (incbeta) (the former is essential for replication); and (v) RepA is a trans-acting incompatibility factor. We suggest that incalpha is a cis-acting site required for plasmid partitioning and that the origin of replication lies within incbeta.     

DNA bending in the mycobacterial plasmid pAL5000 origin-RepB complex

Plasmid pAL5000 represents a family of relatively newly discovered cryptic plasmids in gram-positive Actinomycetes bacteria. The replication regions of these plasmids comprise a bicistronic operon, repA-repB, encoding two replication proteins. Located upstream is a cis-acting element that functions as the origin of replication. It comprises an ~200-bp segment spanning two binding sites for the replication protein RepB, a low-affinity (L) site and a high-affinity (H) site separated by an ~40-bp spacer sequence. The trajectory of the DNA in the RepB-origin complex has been investigated, and it has been found that the origin undergoes significant bending movements upon RepB binding. RepB binding not only led to local bending effects but also caused a long-range polar curvature which affected the DNA sequences 3′ to the H site. These movements appear to be essential for the in-phase alignment of the L and H sites that leads to the formation of a looped structure. A novel property of RepB unearthed in this study is its ability to form multimers. This property may be an important factor that determines the overall trajectory of the DNA in the RepB-origin complex. The results presented in this study suggest that the origins of replication of pAL5000 and related plasmids are highly flexible and that multimeric, RepB-like initiator proteins bind the origin and induce local deformations and long-range curvatures which are probably necessary for the proper functioning of the origin.     

Analysis of elements involved in pseudoknot-dependent expression and regulation of the repA gene of an IncL/M plasmid

Replication of the IncL/M plasmid pMU604 is controlled by a small antisense RNA molecule (RNAI), which, by inhibiting the formation of an RNA pseudoknot, regulates translation of the replication initiator protein, RepA. Efficient translation of the repA mRNA was shown to require the translation and correct termination of the leader peptide, RepB, and the formation of the pseudoknot. Although the pseudoknot was essential for the expression of repA, its presence was shown to interfere with the translation of repB. The requirement for pseudoknot formation could in large part be obviated by improving the ribosome binding region of repA, either by replacing the GUG start codon by AUG or by increasing the spacing between the start codon and the Shine-Dalgarno sequence (SD). The spacing between the distal pseudoknot sequence and the repA SD was shown to be suboptimal for maximal expression of repA.     

Analysis of the replication region of a mycobacterial plasmid, pMSC262.

We determined the nucleotide sequence of a DNA fragment which contains the replication region of pMSC262, a Mycobacterium scrofulaceum plasmid used to construct the Mycobacterium-Escherichia coli shuttle vector. The complete sequence of the fragment contained 2,504 bp with an overall G+C content of 69.8%. By deletion analysis, we found that the minimum length required for plasmid replication in M. bovis BCG was about 1.6 kb. Within this region, several open reading frames (ORFs) and a putative replication origin (ori) were identified by computer analysis. One of the ORFs, ORF2, which encodes a putative 28.9-kDa basic protein with characteristics of DNA-binding proteins, appeared to be involved in replication of the plasmid in BCG. By separation of ORF2 and the putative ori region, it was revealed that the relative locations of ORF2 and the putative ori region are likely important for replication in BCG. No DNA or amino acid homologies were found between this replication region and that of pAL5000, another mycobacterial plasmid used for vector plasmid construction. In addition, we found that this replicon did not lead to replication in E. coli and was compatible in BCG with pAL5000-derived vector plasmid pYUB75 (R. G. Barletta, D. D. Kim, S. B. Snapper, B. R. Bloom, and W. R. Jacobs, J., J. Gen. Microbiol. 138:23-30, 1992).     

Identification and mapping of the replication genes of an R factor, R100-1, integrated into the chromosome of Escherichia coli K-12

A stable Hfr strain of Escherichia coli K-12 was obtained by integrative suppression by an R factor, R100-1. The R factor was integrated into the right of 81 min, and chromosome transfer occurred counterclockwise. Mating experiments revealed two linkage groups of genes on the R factor. Drug-resistant transductants of a dnaA-ts recipient from an R-factor Hfr and from an R(+) strain differ in their drug resistance patterns, temperature sensitivity, and transferability of drug resistance as well as chromosome markers. Transductants that transferred chromosome markers were further classified as to the origin and direction of chromosome transfer. For temperature-sensitive transductants, the reversion frequency to temperature resistance was determined, and these revertants were scored for transfer of drug resistance as well as chromosome markers. Two genes responsible for integrative suppression (designated as repA) and the other for autonomous replication (designated as repB) were identified and mapped. The arrangement of genes on the R factor is... (sul, str, cml)... repA... tra... (tet, repB).... The map of the autonomously replicating R factor is probably a circle connecting both sides of this linear map. Thus, a method has been established to map a plasmid that could not finely be analyzed under autonomous state by transduction. It also permits genetic analysis of genes responsible for replication of the plasmid without making use of a conditional mutant of itself but with that of the host, dnaA.     

Function of the N-terminal half of RepA in activation of Rts1 ori.

The RepA protein of the Rts1 plasmid, consisting of 288 amino acids, is a trans-acting protein essential for replication. A mutant repA gene, repA delta C143, carrying a deletion that removed the 143 C-terminal amino acids of RepA, could transform, but at a low frequency, an Escherichia coli polA strain, JG112, when repA delta C143 was cloned into pBR322 with Rts1 ori in the natural configuration. The transformation was less efficient without the dyad DnaA box in the ori region, and no transformation occurred at 42 degrees C, characteristic of Rts1 replication. A fusion of the 3'-terminal half of repA of the P1 plasmid to repA delta C143 yielded a pBR322 chimeric plasmid that contained Rts1 ori through hybrid (Rts1-P1) repA. This plasmid was maintained much more stably in JG112 at 37 degrees C. At 42 degrees C, however, it was quite unstable. The overproduced hybrid RepA protein showed interference with mini-Rts1 replication in trans and also exhibited an autorepressor function, although both activities were decreased. These findings suggest that the N-terminal half of the RepA molecule of Rts1 is involved in the activation of the replication origin.     

Isolation of a new broad-host-range IncQ-like plasmid, pTC-F14, from the acidophilic bacterium Acidithiobacillus caldus and analysis of the plasmid replicon

A moderately thermophilic (45 to 50 degrees C), highly acidophilic (pH 1.5 to 2.5), chemolithotrophic Acidithiobacillus caldus strain, f, was isolated from a biooxidation process used to treat nickel ore. Trans-alternating field electrophoresis analysis of total DNA from the A. caldus cells revealed two plasmids of approximately 14 and 45 kb. The 14-kb plasmid, designated pTC-F14, was cloned and shown by replacement of the cloning vector with a kanamycin resistance gene to be capable of autonomous replication in Escherichia coli. Autonomous replication was also demonstrated in Pseudomonas putida and Agrobacterium tumefaciens LBA 4404, which suggested that pTC-F14 is a broad-host-range plasmid. Sequence analysis of the pTC-F14 replicon region revealed five open reading frames and a replicon organization like that of the broad-host-range IncQ plasmids. Three of the open reading frames encoded replication proteins which were most closely related to those of IncQ-like plasmid pTF-FC2 (amino acid sequence identities: RepA, 81%; RepB, 78%; RepC, 74%). However, the two plasmids were fully compatible and pTC-F14 represents a new IncQ-like plasmid replicon. Surprisingly, asymmetrical incompatibility was found with the less closely related IncQ plasmid R300B derivative pKE462 and the IncQ-like plasmid derivative pIE1108. Analysis of the pTC-F14 oriV region revealed five direct repeats consisting of three perfectly conserved 22-bp iterons flanked by iterons of 23 and 21 bp. Plasmid pTC-F14 had a copy number of 12 to 16 copies per chromosome in both E. coli, and A. caldus. The rep gene products of pTC-F14 and pTF-FC2 were unable to functionally complement each other's oriV regions, but replication occurred when the genes for each plasmid's own RepA, RepB, and RepC proteins were provided in trans. Two smaller open reading frames were found between the repB and repA genes of pTC-F14, which encode proteins with high amino acid sequence identity (PasA, 81%; PasB, 72%) to the plasmid addiction system of pTF-FC2. This is the second time a plasmid stability system of this type has been found on an IncQ-like plasmid.