Production of tannase by Aspergillus niger Aa-20 in submerged and solid-state fermentation: influence of glucose and tannic acid

Tannase production by Aspergillus niger Aa-20 was studied in submerged (SmF) and solid-state (SSF) fermentation systems with different tannic acid and glucose concentrations. Tannase activity and productivity were at least 2.5 times higher in SSF than in SmF. Addition of high tannic acid concentrations increased total tannase activity in SSF, while in SmF it was decreased. In SmF, total tannase activity increased from 0.57 to 1.03 IU/mL, when the initial glucose concentration increased from 6.25 to 25 g/L, but a strong catabolite repression of tannase synthesis was observed in SmF when an initial glucose concentration of 50 g/L was used. In SSF, maximal values of total tannase activity decreased from 7.79 to 2.51 IU when the initial glucose concentration was increased from 6.25 to 200 g/L. Kinetic results on tannase production indicate that low tannase activity titers in SmF could be associated to an enzyme degradation process which is not present in SSF. Tannase titers produced by A. niger Aa-20 are fermentation system-dependent, favoring SSF over SmF. Journal of Industrial Microbiology & Biotechnology (2001) 26, 296–302. Received 07 July 2000/ Accepted in revised form 15 February 2001     

Beta-fructofuranosidase production by 2-deoxyglucose resistant mutants of aspergillus niger in submerged and solid-state fermentation

Aspergillus niger produces extracellular beta-fructofuranosidase under submerged (SmF) and solid state fermentation (SSF) conditions. After UV mutagenesis of conidiospores of A. niger, 2-deoxyglucose (10 g/l) resistant mutants were isolated on Czapek's minimal medium containing glycerol as a carbon source and the mutants were examined for improved production of beta-fructofuranosidase in SmF and SSF conditions. One of such mutant DGRA-1 overproduced beta-fructofuranosidase in both SmF and SSF conditions. In SmF, the mutant DGRA-1 showed higher beta-fructofuranosidase productivity (110.8 U/l/hr) than the wild type (48.3 U/l/hr). While in SSF the same strain produced 322 U/l/hr of beta-fructofuranosidase, 2 times higher than that of wild type (154.2 U/l/hr). In SmF, both wild type and mutants produced relatively low level of beta-fructofuranosidase in medium containing sucrose with glucose than from the sucrose medium. However in SSF, the DGRA-1 mutant grown in sucrose and sucrose+ glucose did not show any difference with respect to beta-fructofuranosidase production. These results indicate that the catabolite repression of beta-fructofuranosidase synthesis is observed in SmF whereas in SSF such regulation was not prominent.     

Production of pectinase from deseeded sunflower head by Aspergillus niger in submerged and solid-state conditions

Studies were carried out on the production of pectinases using deseeded sunflower head by Aspergillus niger DMF 27 and DMF 45 in submerged fermentation (SmF) and solid-state fermentation (SSF). Higher titres of endo- and exo-pectinases were observed when medium was supplemented with carbon (4% glucose for SmF and 6% sucrose for SSF) and nitrogen (ammonium sulphate, 0.3% for both SmF and SSF) sources. Green gram husk proved to be relatively a better supplement to attain higher yield of endo-pectinase (11.7 U/g) and exo-pectinase (30.0 U/g) in solid-state conditions. Maximum production of endo-pectinase (19.8 U/g) and exo-pectinase (45.9 U/g) by DMF 45 were recorded in SSF when compared to endo-pectinase (18.9 U/ml) and exo-pectinase (30.3 U/ml) by DMF 27 in SmF under optimum process conditions.     

Effect of nonionic surfactants on Rhizopus homothallicus lipase activity: a comparative kinetic study

Based on amino-terminal sequencing and mass spectrometry data on the Rhizopus homothallicus lipase extracted using solid (SSF) and submerged state fermentation (SmF) methods, we previously established that the two enzymes were identical. Differences were observed, however, in terms of the specific activity of these lipases and their inhibition by diethyl p-nitrophenyl phosphate (E600). The specific activity of the SSF lipase (10,700 μmol/min/mg) was found to be 1.2-fold that of SmF lipase (8600 μmol/min/mg). These differences might be the result of residual Triton X-100 molecules interacting with the SSF lipase. To check this hypothesis, the SmF lipase was incubated with submicellar concentrations of Triton X-100. The specific activity of the lipase increased after this treatment, reaching similar values to those measured with the SSF lipase. Preincubating SSF and SmF lipases with E600 at a molar excess of 100 for 1 h resulted in 80% and 60% enzyme inhibition levels, respectively. When the SmF lipase was preincubated with Triton X-100 for 1 h at a concentration 100 times lower than the Trition X-100 critical micellar concentration, the inhibition of the lipase by E600 increased from 60% to 80%. These results suggest that residual detergent monomers interacting with the enzyme may after the kinetic properties of the Rh. homothallicus lipase.     

Optimization of media for β-fructofuranosidase production by Aspergillus niger in submerged and solid state fermentation

The kinetics of β-fructofuranosidase (Ffase) production by Aspergillus niger in submerged (SmF) and solid-state fermentation (SSF) systems was investigated. The maximum productivity of Ffase (81.8 U/l per h) was obtained in SSF for 72 h while it was 18.3 U/l per h in SmF for 120 h. The productivity of extra cellular Ffase produced in SSF was 5-fold higher than in SmF. Optimization of fermentation medium for Ffase production was carried out using De Meo's fractional factorial design with seven components such as (NH₄)₂SO₄, KH₂PO₄, FeSO₄, MgSO₄ · 7H₂O, sucrose, urea and yeast extract. The media designed for SmF after two steps of optimization supported the growth of A. niger and higher productivity of Ffase (58.3 U/l per h) than with the medium before optimization. The optimized medium of SmF when used in SSF, did not improve the Ffase productivity and therefore medium for SSF was optimized independent of SmF. After two optimization steps, the media was defined for SSF which supported the growth and high level of Ffase productivity (149.1 U/l per h) in SSF compared to the medium before optimization (81.8 U/l per h) and optimized medium for SmF (58.3 U/l per h). Our results suggested that the optimized media for SmF and SSF for the production of Ffase have to be different.     

Mycophenolic acid production in solid-state fermentation using a packed-bed bioreactor

Mycophenolic acid (MPA) was produced from Penicillium brevicompactum by solid-state fermentation (SSF) using pearl barley, and submerged fermentation (SmF) using mannitol. It was found that SSF was superior to SmF in terms of MPA concentration (1219 mg/L vs. 60 mg/L after 144 h fermentation), and the product yields were 6.1 mg/g pearl barley for SSF and 1.2 mg/g mannitol for SmF. The volumetric productivities were 8.5 and 0.42 mg/L h for SSF and SmF, respectively.The optimum solid substrate of SSF for MPA production was pearl barley, producing 5470 mg/kg compared with wheat bran (1601 mg/kg), oat (3717 mg/kg) and rice (2597 mg/kg). The optimum moisture content, incubation time and inoculum concentrations were 70%, 144 h and 6%, respectively. Neither the addition of mannitol or (NH4)₂HPO₄ nor adjustment of media pH within the range of 3–7 significantly enhanced MPA production.MPA production by SSF using a packed-bed bioreactor was performed and an increased maximum production of MPA 6.9 mg/g was achieved at 168 h incubation time. The higher volumetric productivity and concentrations makes SSF an attractive alternative to SmF for MPA production.     

Solid-state fermentation increases secretome complexity in Aspergillus brasiliensis

Aspergillus is used for the industrial production of enzymes and organic acids, mainly by submerged fermentation (SmF). However, solid-state fermentation (SSF) offers several advantages over SmF. Although differences related to lower catabolite repression and substrate inhibition, as well as higher extracellular enzyme production in SSF compared to SmF have been shown, the mechanisms undelaying such differences are still unknown. To explain some differences among SSF and SmF, the secretome of Aspergillus brasiliensis obtained from cultures in a homogeneous physiological state with high glucose concentrations was analyzed. Of the regulated proteins produced by SmF, 74% were downregulated by increasing the glucose concentration, whereas all those produced by SSF were upregulated. The most abundant and upregulated protein found in SSF was the transaldolase, which could perform a moonlighting function in fungal adhesion to the solid support. This study evidenced that SSF: (i) improves the kinetic parameters in relation to SmF, (ii) prevents the catabolite repression, (iii) increases the branching level of hyphae and oxidative metabolism, as well as the concentration and diversity of secreted proteins, and (iv) favors the secretion of typically intracellular proteins that could be involved in fungal adhesion. All these differences can be related to the fact that molds are more specialized to growth in solid materials because they mimic their natural habitat.     

Effects of different carbon sources on the synthesis of pectinase by Aspergillus niger in submerged and solid state fermentations

A study was made to compare the production of pectinase by Aspergillus niger CH4 in solid-state (SSF) and submerged (SmF) fermentations. Production of endo- (endo-p) and exo-pectinase (exo-p) by SSF was not reduced when glucose, sucrose or galacturonic acid (up to 10%) were added to a culture medium containing pectin. Moreover, both activities increased when concentrations of the carbon sources were also increased. In SmF, these activities were strongly decreased when glucose or sucrose (3%) was added to culture medium containing pectin. The addition of galacturonic acid affected endo-p activity production to a lesser extend than exo-p. Final endo-p and exo-p activities in SSF were three and 11 times higher, respectively, than those obtained in SmF. The overall productivities of SSF were 18.8 and 4.9 times higher for endo-p and exo-p, respectively, than those in SmF. These results indicate that regulatory phenomena, such as induction-repression or activation-inhibition, related to pectinase synthesis by A. niger CH4 are different in the two types of fermentation. Correspondence to: E. Favela-Torres     

Gibberellic acid by solid state fermentation: Consistent and improved yields

Five strains each of Gibberella fujikuroi and Fusarium monoliforme were screened to select G. fujikuroi P-3, a strain capable of giving consistent production of gibberellic acid (GA(3)) by solid state fermentation (SSF). The comparative production of GA(3) by SSF and submerged fermentation (SmF) indicated better productivity with the former technique. The accumulation of GA(3) was 1.626 times higher in the case of SSF. On the basis of available carbohydrates in the media, the percent conversions were 0.096 and 0.156 in SmF and SSF, respectively. The use of coarse wheat bran of the particle size of 0.3-0.4 cm resulted in an increase of 2.5 times in the yield of GA(3). The enrichment of commercial wheat bran with soluble starch gave enhanced accumulation to an extent of 3.5 times. The relation between GA(3) production and cell growth in SSF was similar to that encountered in SmF. The consistent and improved yields to a tune of 1.22 g GA(3) per kilogram dry moldy bran (DMB) establish the potential and feasibility of SSF for the production of GA(3) by G. fujikuroi P-3. On preliminary cost analysis, a net savings of about 60% and 50% on fermentation medium cost and the expenditure on down-stream processing, respectively, as compared to the presently employed SmF technique was evident.     

Exopectinases produced by Aspergillus niger in solid-state and submerged fermentation: a comparative study

Exopectinase production by Aspergillus niger was compared in submerged fermentation (SmF) and solid-state fermentation (SSF). SSF was carried out using polyurethane foam (PUF) as the solid support. The purpose was to study the effect of sucrose addition (0 or 40 g/l) and water activity level (A _w=0.99 or 0.96) on the level of enzyme activity induced by 15 g/l of pectin. Mycelial growth, as well as extracellular protease production, was also monitored. Sucrose addition in SmF resulted in catabolite repression of exopectinase activity. However, in SSF, an enhancement of enzyme activity was observed. Protease levels were minimal in SSF experiments with sucrose and maximal in SmF without sucrose. Exopectinase yields (IU/g X) were negligible in SmF with sucrose. The high levels of exopectinase with sucrose and high A _w in SSF can be explained by a much higher level of biomass production without catabolite repression and with lower protease contamination. Journal of Industrial Microbiology & Biotechnology (2001) 26, 271–275. Received 05 July 2000/ Accepted in revised form 27 January 2001     

Saccharification of orange peel wastes with crude enzymes from new isolated <Emphasis Type="Italic">Aspergillus japonicus</Emphasis> PJ01

This study investigated the saccharification of orange peel wastes with crude enzymes from Aspergillus japonicus PJ01. Pretreated orange peel powder was hydrolyzed by submerged fermentation (SmF) and solid-state fermentation (SSF) crude enzymes, the results showed that 4 % (w/v) of solid loading, undiluted crude enzymes, and 45 °C were suitable saccharification conditions. The hydrolysis kinetics showed that the apparent Michaelis–Menten constant \(K_{{\text{m}_{app} }}\) and maximal reaction rate \(V_{{\max_{app} }}\) were 73.32 g/L and 0.118 g/(L min) for SmF enzyme, and 41.45 g/L and 0.116 g/(L min) for SSF enzyme, respectively. After 48 h of hydrolysis, the saccharification yields were 58.5 and 78.7 %, the reducing sugar concentrations were 14.9 and 20.1 mg/mL by SmF and SSF enzymes. Material balance showed that the SmF enzymatic hydrolysate was enriched galacturonic acid > arabinose > galactose > xylose, and the SSF enzymatic hydrolysate was enriched galacturonic acid > xylose > galactose > arabinose.     

Effect of different cultural conditions for phytase production by <Emphasis Type="Italic">Aspergillus niger</Emphasis> CFR 335 in submerged and solid-state fermentations

The present article deals with the studies on the effect of media ingredients, such as carbon, nitrogen, inorganic phosphates, surfactants, and metal salts, on phytase enzyme production by Aspergillus niger CFR 335 in submerged (SmF) and solid-state fermentations (SSF). The results obtained showed a 1.5-fold higher enzyme yield in the presence of sucrose in both SmF and SSF, while peptone was found to be a favorable nitrogen source for SmF. Sodium dihydrogen phosphate (NaH₂PO₄) favored 34% higher enzyme yield than the control, which was followed by 19% higher activity in potassium dihydrogen phosphate (KH₂PO₄) in SSF at 0.015% w/v. The addition of Tween-20 in SmF showed a maximum yield of 12.6 U/mL while, SDS suppressed the growth of the fungus. None of the surfactants favored the enzyme yield in SSF. Calcium chloride (CaCl₂) was extensively efficient in stimulating more than 55% higher phytase production in SmF at 0.01% v/v. In SSF, none of the metal salts stimulated phytase production.     

Lactic acid production directly from starch in a starch-controlled fed-batch operation using Lactobacillus amylophilus

Based on the batch results, we constructed a simplified simultaneous saccharification and fermentation (SSF) model for the simulation of lactic acid production directly from unhydrolyzed potato starch using Lactobacillus amylophilus. The results of batch operation at different initial starch concentrations (20, 40 and 60 g/l) indicated that a higher initial starch concentration would lead to a slightly lower productivity, but would largely decrease the yield. Among that, the batch with 20 g/l of initial starch had the maximum productivity and the maximum yield, which would be 0.31 g/(l h) and 98% (g/g), respectively. In view of increasing the productivity and the final lactic acid concentration, a starch-controlled fed-batch operation with 20 g/l of initial starch was performed. It showed the fed-batch operation with starch controlled at 8 ± 1 g/l by adjusting the starch-feeding rate led to the maximum productivity of 0.75 g/(l h) and the yield of 69%.     

Pectinase production by a Brazilian thermophilic fungus <Emphasis Type="Italic">Thermomucor indicae-seudaticae</Emphasis> N31 in solid-state and submerged fermentation

Thermophilic organisms produce thermostable enzymes, which have a number of applications, justifying the interest in the isolation of new thermophilic strains and study of their enzymes. Thirty-four thermophilic and thermotolerant fungal strains were isolated from soil, organic compost, and an industrial waste pile based on their ability to grow at 45°C and in a liquid medium containing pectin as the only carbon source. Among these fungi, 50% were identified at the genus level as Thermomyces, Aspergillus, Monascus, Chaetomium, Neosartoria, Scopulariopsis, and Thermomucor. All isolated strains produced pectinase during solid-state fermentation (SSF). The highest polygalacturonase (PG) activity was obtained in the culture medium of thermophilic strain N31 identified as Thermomucor indicae-seudaticae. Under SSF conditions on media containing a mixture of wheat bran and orange bagasse (1 : 1) at 70% of initial moisture, this fungus produced the maximum of 120 U/ml of exo-PG, while in submerged fermentation (SmF) it produced 13.6 U/ml. The crude PG from SmF was more thermostable than that from SSF and exhibited higher stability in acidic pH.     

Laccase production in solid‐state and submerged fermentation by Pleurotus ostreatus

A solid‐state fermentation (SSF) system for production of an industrially important enzyme laccase by Pleurotus ostreatus was developed by using potato dextrose yeast extract medium and polyurethane foam as a supporting material. The maximum laccase production in the SSF system was as high as 3×10⁵ U/L. Addition of inducers, such as copper and ferulic acid, further enhanced the laccase production in SSF. Moreover, the time required for the maximum laccase production was reduced to 6 days compared to 10 days reported earlier. The improvement achieved by the SSF system was investigated by comparing it to a submerged fermentation system (SmF), both experimentally and by using a standard theoretical model along with a parameter sensitivity analysis. Laccase production in SSF was found to be twice of that in SmF. One of the main reasons for higher laccase production in SSF compared to SmF was possibly due to the presence of higher proteolytic activity in SmF. Strong proteolytic activity in SmF presumably caused subsequent laccase degradation, which lowered the ultimate laccase production in SmF compared to SSF.     

Biodegradation of high concentrations of hexadecane by Aspergillus niger in a solid-state system: kinetic analysis

Solid-state microcosms were used to assess the influence of constant and variable C/N ratios on the biodegradation efficiency by Aspergillus niger at high hexadecane (HXD) concentrations (180-717 mg g-1). With a constant C/N ratio, 100% biodegradation (33-44% mineralization) was achieved after 15 days, at rates increasing as the HXD concentration increased. Biomass yields (YX/S) remained almost independent (approximately 0.77) of the carbon-source amount, while the specific growth rates (mu) decreased with increasing concentrations of HXD. With C/N ratios ranging from 29 to 115, complete degradation was only attained at 180 mg g-1, corresponding to 46% mineralization. YX/S diminished (approximately 0.50 units) as the C/N ratio increased. The highest values of mu (1.08 day-1) were obtained at low C/N values. Our results demonstrate that, under balanced nutritional conditions, high HXD concentrations can be completely degraded in solid-state microcosms, with a negligible (<10%) formation of by-products.     

Oxidative state in idiophase links reactive oxygen species (ROS) and lovastatin biosynthesis: Differences and similarities in submerged- and solid-state fermentations

The present work was focused on finding a relationship between reactive oxygen species (ROS) and lovastatin biosynthesis (secondary metabolism) in Aspergillus terreus. In addition, an effort was made to find differences in accumulation and control of ROS in submerged (SmF) and solid-state fermentation (SSF), which could help explain higher metabolite production in the latter. sod1 expression, ROS content, and redox balance kinetics were measured during SmF and SSF. Results showed that A. terreus sod1 gene (oxidative stress defence enzyme) was intensely expressed during rapid growth phase (trophophase) of lovastatin fermentations. This high expression decreased abruptly, just before the onset of production (idiophase). However, ROS measurements detected high concentrations only in idiophase, suggesting a link between ROS and lovastatin biosynthesis. Apparently sod1 down regulation promotes the rise of ROS during idiophase. This oxidative state in idiophase was further supported by a high redox balance observed in trophophase that changed to a low value in idiophase (around six-fold lower). The patterns of ROS accumulation, sod1 expression, and redox balance behaviour were similar in SmF and SSF. However, sod1 expression and ROS concentration (ten-fold), were higher in SmF. Our results indicate a link between ROS and lovastatin biosynthesis. Also, showed differences of physiology in SSF that yield lower but more steady ROS concentrations, which could be associated to higher lovastatin production.     

In vivo enzymatic digestion, in vitro xylanase digestion, metabolic analogues, surfactants and polyethylene glycol ameliorate laccase production from Ganoderma sp. kk-02

AIMS: The effect of in vivo enzymatic digestion (IVED), in vitro xylanase digestion (IVXD), metabolic analogues, surfactants and polyethylene glycol (PEG) on laccase production from Ganoderma sp. kk-02 was studied. METHODS AND RESULTS: An acidic laccase producing Ganoderma sp. kk-02 produced 16.0 U ml(-1) and 365.0 U g(-1) of laccase, when grown under submerged (SmF) and solid state (SSF) fermentation conditions, respectively. Modification of the substrate (wheat bran) molecular architecture by IVED and IVXD increased subsequent laccase production from Ganoderma sp. kk-02 by 1.31-fold (21.0 U ml(-1)) (SmF); 2.21-fold (810.0 U g(-1)) (SSF) and 1.10-fold (18.0 U ml(-1)) (SmF); 1.78-fold (650.0 U g(-1)) (SSF) when compared with untreated wheat bran. Further enhancement in laccase yield under SmF and SSF was obtained when IVED treated wheat bran was used in conjunction with amino acids [DL-tryptophan, 2.66-fold (56.0 U ml(-1)) SmF; 2.86-fold (2324.0 U g(-1)) SSF], vitamins [biotin, 1.71-fold (36.0 U ml(-1)) SmF; 3.06-fold (2483.0 U g(-1)) SSF], surfactants [Tween-40, 1.85-fold (39.0 U ml(-1)) SmF; 2.25-fold (1828.0 U g(-1)) SSF], and PEG [PEG 6000, 1.93-fold (40.0 U ml(-1)) SmF; 1.58-fold (1284.0 U g(-1)) SSF]. CONCLUSIONS: The IVED of substrate (wheat bran) facilitated hyper laccase production in presence of additives from Ganoderma sp. kk-02. SIGNIFICANCE AND IMPACT OF THE STUDY: The study highlights a new methodology viz. IVED for concomitant and economic production of diverse enzymes using the same substrate. The hyper laccase levels obtained could improve the economic competitiveness of environmentally benign processes applied in varied industries. The work also provides an insight into the regulation of complex metabolic pathways governing the expression of extra cellular proteins from white-rot fungi.     

Novel Characteristics of Bifidobacterium bifidum in Solid State Fermentation System

Summary The characteristics of Bifidobacterium bifidum grown in solid state fermentation (SSF) system (water content of media 54.5 and 68.8%) was compared with the submerged fermentation (SmF) system (water content of medium: 89.8%). Besides lactic acid (lactate) and acetic acid (acetate), the bacterium was able to secrete propionic acid (propionate) and butyric acid (butyrate) under SSF conditions. However, it only produced lactate and acetate under SmF conditions. The ratio of lactate to acetate was 1.26–1.62:1 in SSF but it was 1:2 in SmF. A higher content of C16:0 and C18:1 as well as a lower content of C18:0 cell membrane fatty acids were observed in SSF than in SmF. There was a lower growth rate, a lower viable count and a longer logarithmic growth phase for B. bifidum cultivated in SSF than in SmF.