Improved thermostability and PCR efficiency of Thermococcus celericrescens DNA polymerase via site-directed mutagenesis

The Thermococcus celericrescens (Tcel) DNA polymerase gene, which contains a 2328-bp open reading frame that encodes 775 amino acid residues, was expressed in the Escherichia coli strain Rosetta(DE3)pLysS. The expressed enzyme was purified through heat treatment, HisTrap™ HP column chromatography and then HiTrap™ SP HP column chromatography. Tcel DNA polymerase has poor thermostability and PCR efficiency compared to those of other family B DNA polymerases. To improve thermostability and PCR efficiency, mutant Tcel DNA polymerases were created via site-directed mutagenesis. Specifically, we targeted the A752 residue for enhanced thermostability and the N213 residue for improved PCR efficiency. The mutant Tcel DNA polymerases all showed enhanced PCR efficiency and thermostability compared to those of the wild-type Tcel DNA polymerase. Specifically, the double mutant TcelA752K/N213D DNA polymerase had an approximately three-fold increase in thermostability over that of the wild-type enzyme and amplified a long 10-kb PCR product in an extension time of 2 min. However, there was a small change in the 3′ → 5′ exonuclease activity compared with that of the wild-type Tcel DNA polymerase, even though the mutation is in the ExoII motif. The double mutant TcelA752K/N213D DNA polymerase had a 2.6-fold lower error rate compared to that of Taq DNA polymerase. It seems that the double mutant TcelA752K/N213D DNA polymerase can be used in LA (long and accurate) PCR.     

Cloning, purification, and characterization of a new DNA polymerase from a hyperthermophilic archaeon, Thermococcus sp. NA1

Genomic analysis of Thermococcus sp. NA revealed the presence of a 3,927-base-pair (bp) family B-type DNA polymerase gene, TNA1_pol. TNA1_pol, without its intein, was overexpressed in Escherichia coli, purified using metal affinity chromatography, and characterized. TNA1_pol activity was optimal at pH 7.5 and 75 degrees C. TNA1_pol was highly thermostable, with a half-life of 3.5 h at 100 degrees C and 12.5 h at 95 degrees C. Polymerase chain reaction parameters of TNA1_pol such as error-rate, processivity, and extension rate were measured in comparison with rTaq, Pfu, and KOD DNA polymerases. TNA1_pol averaged one incorrect bp every 4.45 kilobases (kb), and had a processivity of 150 nucleotides (nt) and an extension rate of 60 bases/s. Thus, TNA1_pol has a much faster elongation rate than Pfu DNA polymerase with 7-fold higher fidelity than that of rTaq.     

Enhanced PCR efficiency of high-fidelity DNA polymerase from Thermococcus waiotapuensis

Twa DNA polymerase from hyperthermophilic archaeon Thermococcus waiotapuensis has exceedingly high fidelity among family B DNA polymerases. However, Twa DNA polymerase has significant shortcomings in terms of a low extension rate and poor processivity. To resolve these weaknesses, we focused on two amino acid residues (N565 and H633) in the palm and thumb subdomains of the Twa DNA polymerase. These two residues were replaced by site-directed mutagenesis and the enzymatic properties of the mutants were analyzed. Here, Twa H633R DNA polymerase showed significantly improved polymerase function compared to wild-type Twa DNA polymerase in terms of processivity (2-fold), extension rate (1.5-fold) and PCR efficiency. Kinetic analysis using DNA as a template revealed that the k_cat value of the Twa H633R mutant was similar to that of wild-type, but the K_m of the Twa H633R mutant was about 1.6-fold lower than that of the wild-type. These results showed that the Arg residue substitution at H633 located in the thumb subdomain has a positive effect on processivity, extension rate and PCR efficiency, suggesting that the Twa H633R mutant allows a conformational change for easy access of the primer-template to the binding site of the polymerase domain.     

Sensing domain and extension rate of a family B-type DNA polymerase determine the stalling at a deaminated base

The uracil-sensing domain in archaeal family B-type DNA polymerases recognizes pro-mutagenic uracils in the DNA template, leading to stalling of DNA polymerases. Here, we describe our new findings regarding the molecular mechanism underpinning the stalling of polymerases. We observed that two successive deaminated bases were required to stall TNA1 and KOD1 DNA polymerases, whereas a single deaminated base was enough for stalling Pfu DNA polymerase, in spite of the virtually identical uracil-sensing domains. TNA1 and KOD1 DNA polymerases have a much higher extension rate than Pfu DNA polymerase; decreasing the extension rate resulted in stalling by TNA1 and KOD1 DNA polymerases at a single deaminated base. These results strongly suggest that these polymerases require two factors to stop DNA polymerization at a single deaminated base: the presence of the uracil-sensing domain and a relatively slow extension rate.     

Long and accurate PCR with a mixture of KOD DNA polymerase and its exonuclease deficient mutant enzyme

DNA polymerase from Thermococcus kodakaraensis KOD1 (previously Pyrococcus sp. KOD1) is one of the most efficient thermostable PCR enzymes exhibiting higher accuracy and elongation velocity than any other commercially available DNA polymerase [M. Takagi et al. (1997) Appl. Environ. Microbiol. 63, 4504-4510]. However, when long distance PCR (>5 kbp) was performed with KOD DNA polymerase, amplification efficiency (product yield) becomes lower because of its strong 3'-5' exonuclease activity for proof-reading. In order to improve a target length limitation in PCR, mutant DNA polymerases with decreased 3'-5' exonuclease activity were designed by substituting amino acid residues in conserved exonuclease motifs, Exo I (Asp141-Xaa-Glu), Exo II (Asn210-Xaa-Xaa-Xaa-Phe-Asp), and Exo III (Tyr311-Xaa-Xaa-Xaa-Asp). Exonuclease activity and amplification fidelity (error rate) of the DNA polymerases were altered by mutagenesis. However, long and accurate PCR by a single-type of mutant DNA polymerase was very difficult. The wild-type DNA polymerase (WT) and its exonuclease deficient mutant (N210D) were mixed in different ratio and their characteristics in PCR were examined. When the mixed enzyme (WT and N210D) was made at the ratio of 1:40, long PCR (15 kbp) at lower mutation frequency could be efficiently achieved.     

Characterization of Family D DNA polymerase from Thermococcus sp. 9°N

Accurate DNA replication is essential for maintenance of every genome. All archaeal genomes except Crenarchaea, encode for a member of Family B (polB) and Family D (polD) DNA polymerases. Gene deletion studies in Thermococcus kodakaraensis and Methanococcus maripaludis show that polD is the only essential DNA polymerase in these organisms. Thus, polD may be the primary replicative DNA polymerase for both leading and lagging strand synthesis. To understand this unique archaeal enzyme, we report the biochemical characterization of a heterodimeric polD from Thermococcus. PolD contains both DNA polymerase and proofreading 3′–5′ exonuclease activities to ensure efficient and accurate genome duplication. The polD incorporation fidelity was determined for the first time. Despite containing 3′–5′ exonuclease proofreading activity, polD has a relatively high error rate (95 × 10^?5) compared to polB (19 × 10^?5) and at least 10-fold higher than the polB DNA polymerases from yeast (polε and polδ) or Escherichia coli DNA polIII holoenzyme. The implications of polD fidelity and biochemical properties in leading and lagging strand synthesis are discussed.     

Characterization of a dUTPase from the Hyperthermophilic Archaeon <Emphasis Type="Italic">Thermococcus onnurineus</Emphasis> NA1 and Its Application in Polymerase Chain Reaction Amplification

Genomic analysis of the hyperthermophilic archaeon Thermococcus onnurineus NA1 (TNA1) revealed the presence of a 471-bp open reading frame with 93% similarity to the dUTPase from Pyrococcus furiosus. The dUTPase-encoding gene was cloned and expressed in Escherichia coli. The purified protein hydrolyzed dUTP at about a 10-fold higher rate than dCTP. The protein behaved as a dimer in gel filtration chromatography, even though it contains five motifs that are conserved in all homotrimeric dUTPases. The dUTPase showed optimum activity at 80°C and pH 8.0, and it was highly thermostable with a half-life (t _1/2) of 170 min at 95°C. The enzymatic activity of the dUTPase was largely unaffected by variations in MgCl₂, KCl, (NH₄)₂SO₄, and Triton X-100 concentrations, although it was reduced by bovine serum albumin. Addition of the dUTPase to polymerase chain reactions (PCRs) run with TNA1 DNA polymerase significantly increased product yield, overcoming the inhibitory effect of dUTP. Further, addition of the dUTPase allowed PCR amplification of targets up to 15 kb in length using TNA1 DNA polymerase. This enzyme also improved the PCR efficiency of other archaeal family B type DNA polymerases, including Pfu and KOD.     

A Transposon-Derived DNA Polymerase from Entamoeba histolytica Displays Intrinsic Strand Displacement,Processivity and Lesion Bypass

Entamoeba histolytica encodes four family B2 DNA polymerases that vary in amino acid length from 813 to 1279. These DNA polymerases contain a N-terminal domain with no homology to other proteins and a C-terminal domain with high amino acid identity to archetypical family B2 DNA polymerases. A phylogenetic analysis indicates that these family B2 DNA polymerases are grouped with DNA polymerases from transposable elements dubbed Polintons or Mavericks. In this work, we report the cloning and biochemical characterization of the smallest family B2 DNA polymerase from E. histolytica. To facilitate its characterization we subcloned its 660 amino acids C-terminal region that comprises the complete exonuclease and DNA polymerization domains, dubbed throughout this work as EhDNApolB2. We found that EhDNApolB2 displays remarkable strand displacement, processivity and efficiently bypasses the DNA lesions: 8-oxo guanosine and abasic site.Family B2 DNA polymerases from T. vaginalis, G. lambia and E. histolytica contain a Terminal Region Protein 2 (TPR2) motif twice the length of the TPR2 from φ29 DNA polymerase. Deletion studies demonstrate that as in φ29 DNA polymerase, the TPR2 motif of EhDNApolB2 is solely responsible of strand displacement and processivity. Interestingly the TPR2 of EhDNApolB2 is also responsible for efficient abasic site bypass. These data suggests that the 21 extra amino acids of the TPR2 motif may shape the active site of EhDNApolB2 to efficiently incorporate and extended opposite an abasic site. Herein we demonstrate that an open reading frame derived from Politons-Mavericks in parasitic protozoa encode a functional enzyme and our findings support the notion that the introduction of novel motifs in DNA polymerases can confer specialized properties to a conserved scaffold.     

A novel strategy to engineer DNA polymerases for enhanced processivity and improved performance in vitro

Mechanisms that allow replicative DNA polymerases to attain high processivity are often specific to a given polymerase and cannot be generalized to others. Here we report a protein engineering-based approach to significantly improve the processivity of DNA polymerases by covalently linking the polymerase domain to a sequence non-specific dsDNA binding protein. Using Sso7d from Sulfolobus solfataricus as the DNA binding protein, we demonstrate that the processivity of both family A and family B polymerases can be significantly enhanced. By introducing point mutations in Sso7d, we show that the dsDNA binding property of Sso7d is essential for the enhancement. We present evidence supporting two novel conclusions. First, the fusion of a heterologous dsDNA binding protein to a polymerase can increase processivity without compromising catalytic activity and enzyme stability. Second, polymerase processivity is limiting for the efficiency of PCR, such that the fusion enzymes exhibit profound advantages over unmodified enzymes in PCR applications. This technology has the potential to broadly improve the performance of nucleic acid modifying enzymes.     

Functional interdependence of DNA polymerizing and 3'-->5' exonucleolytic activities in Pyrococcus furiosus DNA polymerase I

Pyrococcus furiosus DNA polymerase I (Pol BI) belongs to the family B (alpha-like) DNA polymerases and has a strong 3'-->5' exonucleolytic activity, in addition to its DNA polymerizing activity. To understand the relationship between the structure and function of this DNA polymerase, three deletion mutants, Delta1 (DeltaLeu746-Ser775), Delta2 (DeltaLeu717-Ser775) and Delta3 (DeltaHis672-Ser775), and two substituted mutants of Asp405, D405A and D405E, were constructed. These substitutions affected both the DNA polymerizing and the 3'-->5' exonucleolytic activities. The Delta1 mutant protein had DNA polymerizing activity with higher specific activity than that of the wild-type Pol BI, but retained only 10% of the exonucleolytic activity of the wild-type. The other two deletion mutants lost most of both activities. These results suggest that the DNA polymerizing and exonucleolytic activities are closely related to each other in the folded structure of this DNA polymerase, as proposed in the family B DNA polymerases.     

Vaccinia Virus D4 Mutants Defective in Processive DNA Synthesis Retain Binding to A20 and DNA

Genome replication is inefficient without processivity factors, which tether DNA polymerases to their templates. The vaccinia virus DNA polymerase E9 requires two viral proteins, A20 and D4, for processive DNA synthesis, yet the mechanism of how this tricomplex functions is unknown. This study confirms that these three proteins are necessary and sufficient for processivity, and it focuses on the role of D4, which also functions as a uracil DNA glycosylase (UDG) repair enzyme. A series of D4 mutants was generated to discover which sites are important for processivity. Three point mutants (K126V, K160V, and R187V) which did not function in processive DNA synthesis, though they retained UDG catalytic activity, were identified. The mutants were able to compete with wild-type D4 in processivity assays and retained binding to both A20 and DNA. The crystal structure of R187V was resolved and revealed that the local charge distribution around the substituted residue is altered. However, the mutant protein was shown to have no major structural distortions. This suggests that the positive charges of residues 126, 160, and 187 are required for D4 to function in processive DNA synthesis. Consistent with this is the ability of the conserved mutant K126R to function in processivity. These mutants may help unlock the mechanism by which D4 contributes to processive DNA synthesis.Poxviruses are large, double-stranded DNA viruses that replicate exclusively in the cell cytoplasm in granular structures known as virosomes (31). Separated from the host nucleus, they rely on their own encoded gene products for DNA synthesis and replication (43). To efficiently synthesize its ∼200,000-base genome, the poxvirus DNA polymerase must be tethered to the DNA template by its processivity factor. DNA processivity factors are proteins that stabilize polymerases onto their templates for effective genome replication (1, 22). Processivity factors are synthesized by nearly all replicating systems, ranging from bacteriophages to eukaryotes, yet each one is specific to its cognate polymerase. In the presence of these factors, polymerases are able to incorporate a great number of nucleotides per template binding event; in their absence, polymerases detach from their templates too frequently to successfully replicate the genome (14, 20). E9, the DNA polymerase of the prototypical poxvirus, vaccinia virus, synthesizes approximately 10 nucleotides before dissociating from the viral DNA template (28). However, it can incorporate thousands of nucleotides when it is associated with its processivity factor (29). This extended strand synthesis, known as processivity, is necessary for vaccinia virus to effectively replicate its 192-kb genome.The protein A20 was first reported to be a component of the vaccinia virus processive DNA polymerase (19, 37), yet we were unable to establish processivity in vitro using only A20 and E9. To identify which other proteins were required for processivity, we assessed six in vitro-synthesized proteins known to be involved in vaccinia virus replication (E9, A20, B1, D4, D5, and H5). We found that the protein D4, a uracil DNA glycosylase (UDG), was required in addition to A20 and E9 and that these three proteins are both necessary and sufficient for vaccinia virus processivity. Indeed, A20 and D4 have been shown to interact with each other (15, 26), and our finding supports a report identifying A20 and D4 as forming a heterodimeric processivity factor for E9 (41). Here, we use mutational analysis to examine the role of D4 in processive DNA synthesis. We report the finding of three D4 mutants which are unable to function in processivity yet retain their UDG enzymatic activity and their ability to bind both A20 and DNA.     

Unique Substrate Spectrum and PCR Application of Nanoarchaeum equitans Family B DNA Polymerase

The known archaeal family B DNA polymerases are unable to participate in the PCR in the presence of uracil. Here, we report on a novel archaeal family B DNA polymerase from Nanoarchaeum equitans that can successfully utilize deaminated bases such as uracil and hypoxanthine and on its application to PCR. N. equitans family B DNA polymerase (Neq DNA polymerase) produced λ DNA fragments up to 10 kb with an approximately 2.2-fold-lower error rate (5.53 × 10⁻⁶) than Taq DNA polymerase (11.98 × 10⁻⁶). Uniquely, Neq DNA polymerase also amplified λ DNA fragments using dUTP (in place of dTTP) or dITP (partially replaced with dGTP). To increase PCR efficiency, Taq and Neq DNA polymerases were mixed in different ratios; a ratio of 10:1 efficiently facilitated long PCR (20 kb). In the presence of dUTP, the PCR efficiency of the enzyme mixture was two- to threefold higher than that of either Taq and Neq DNA polymerase alone. These results suggest that Neq DNA polymerase and Neq plus DNA polymerase (a mixture of Taq and Neq DNA polymerases) are useful in DNA amplification and PCR-based applications, particularly in clinical diagnoses using uracil-DNA glycosylase.     

Inactivation of the 3'-5' exonuclease of the replicative T4 DNA polymerase allows translesion DNA synthesis at an abasic site

Here, we have investigated the consequences of the loss of proof-reading exonuclease function on the ability of the replicative T4 DNA polymerase (gp43) to elongate past a single abasic site located on model DNA substrates. Our results show that wild-type T4 DNA polymerase stopped at the base preceding the lesion on two linear substrates having different sequences, whereas the gp43 D219A exonuclease-deficient mutant was capable of efficient bypass when replicating the same substrates. The structure of the DNA template did not influence the behavior of the exonuclease-proficient or deficient T4 DNA polymerases. In fact, when replicating a damaged "minicircle" DNA substrate constructed by circularizing one of the linear DNA, elongation by wild-type enzyme was still completely blocked by the abasic site, while the D219A mutant was capable of bypass. During DNA replication, the T4 DNA polymerase associates with accessory factors whose combined action increases the polymerase-binding capacity and processivity, and could modulate the behavior of the enzyme towards an abasic site. We thus performed experiments measuring the ability of wild-type and exonuclease-deficient T4 DNA polymerases, in conjunction with these replicative accessory proteins, to perform translesion DNA replication on linear or circular damaged DNA substrates. We found no evidence of either stimulation or inhibition of the bypass activities of the wild-type and exonuclease-deficient forms of T4 DNA polymerase following addition of the accessory factors, indicating that the presence or absence of the proof-reading activity is the major determinant in dictating translesion synthesis of an abasic site by T4 DNA polymerase.     

Characterization and PCR optimization of the thermostable family B DNA polymerase from Thermococcus guaymasensis

The gene encoding Thermococcus guaymasensis DNA polymerase (Tgu DNA polymerase) was cloned and sequenced. The 2328 bp Tgu DNA polymerase gene encoded a 775 amino acid residue protein. Alignment of the entire amino acid sequence revealed a high degree of sequence homology between Tgu DNA polymerase and other archaeal family B DNA polymerases. The Tgu DNA polymerase gene was expressed under the control of the T7lac promoter on pET-22b(+) in Escherichia coli BL21-CodonPlus(DE3)-RIL. The expressed enzyme was then purified by heat treatment followed by two steps of chromatography. The optimum pH and temperature were 7.5 and 80 °C, respectively. The optimal buffer for PCR with Tgu DNA polymerase consisted of 50 mM Tris–HCl (pH 8.2), 4 mM MgCl₂, 50 mM KCl, and 0.02% Triton X-100. Tgu DNA polymerase revealed 4-fold higher fidelity (3.17 × 10^?6) than Taq DNA polymerase (12.13 × 10^?6) and a faster amplification rate than Taq and Pfu DNA polymerases. Tgu DNA polymerase had an extension rate of 30 bases/s and a processivity of 150 nucleotides (nt). Thus, Tgu DNA polymerase has some faster elongation rate and a higher processivity than Pfu DNA polymerase. Use of different ratios of Taq and Tgu DNA polymerases determined that a ratio of 4:1 efficiently facilitated long PCR (approximately 15 kb) and a 3-fold lower error rate (4.44 × 10^?6) than Taq DNA polymerase.     

Improved PCR performance and fidelity of double mutant Neq A523R/N540R DNA polymerase

We previously reported that Neq A523R DNA polymerase is more efficient in PCR than wild-type Neq DNA polymerase, and amplifies products more rapidly. Neq A523R DNA polymerase also amplifies templates more rapidly than Pfu DNA polymerase, but has a lower fidelity than Pfu DNA polymerase. To improve product yield and the fidelity of amplification simultaneously, we constructed and characterized the double mutant Neq A523R/N540R. The yield of PCR products was greater for Neq A523R/N540R DNA polymerase than wild-type and other mutant DNA polymerases, and the Neq double mutant catalyzed amplification of a 12-kb PCR product from a lambda template with an extension time of 3 min. The PCR error rate of Neq A523R/N540R DNA polymerase (6.3 × 10⁻⁵) was roughly similar to that of Pfu DNA polymerase (4.8 × 10⁻⁵), but much lower than those of wild-type Neq DNA polymerase (57.2 × 10⁻⁵), Neq A523R DNA polymerase (13.1 × 10⁻⁵), and Neq N540R DNA polymerase (37.7 × 10⁻⁵). These results indicated that A523R and N540R mutations of Neq DNA polymerase had synergistic effects on its fidelity.     

Proofreading exonuclease activity of human DNA polymerase δ and its effects on lesion-bypass DNA synthesis

Replicative DNA polymerases possess 3′ → 5′ exonuclease activity to reduce misincorporation of incorrect nucleotides by proofreading during replication. To examine if this proofreading activity modulates DNA synthesis of damaged templates, we constructed a series of recombinant human DNA polymerase δ (Pol δ) in which one or two of the three conserved Asp residues in the exonuclease domain are mutated, and compared their properties with that of the wild-type enzyme. While all the mutant enzymes lost more than 95% exonuclease activity and severely decreased the proofreading activity than the wild-type, the bypass efficiency of damaged templates was varied: two mutant enzymes, D515V and D402A/D515A, gave higher bypass efficiencies on templates containing an abasic site, but another mutant, D316N/D515A, showed a lower bypass efficiency than the wild-type. All the enzymes including the wild-type inserted an adenine opposite the abasic site, whereas these enzymes inserted cytosine and adenine opposite an 8-oxoguanine with a ratio of 6:4. These results indicate that the exonuclease activity of human Pol δ modulates its intrinsic bypass efficiency on the damaged template, but does not affect the choice of nucleotide to be inserted.     

The processivity factor β controls DNA polymerase IV traffic during spontaneous mutagenesis and translesion synthesis in vivo

The dinB-encoded DNA polymerase IV (Pol IV) belongs to the recently identified Y-family of DNA polymerases. Like other members of this family, Pol IV is involved in translesion synthesis and mutagenesis. Here, we show that the C-terminal five amino acids of Pol IV are essential in targeting it to the β-clamp, the processivity factor of the replicative DNA polymerase (Pol III) of Escherichia coli. In vivo, the disruption of this interaction obliterates the function of Pol IV in both spontaneous and induced mutagenesis. These results point to the pivotal role of the processivity clamp during DNA polymerase trafficking in the vicinity of damaged-template DNA.     

Modeling of pathogenic variants of mitochondrial DNA polymerase: insight into the replication defects and implication for human disease

Background:Mutations in human gene encoding the mitochondrial DNA polymerase γ (HsPolγ) are associated with a broad range of mitochondrial diseases. Here we studied the impact on DNA replication by disease variants clustered around residue HsPolγ-K1191, a residue that in several family-A DNA polymerases interacts with the 3′ end of the primer.MethodsSpecifically, we examined the effect of HsPolγ carrying pathogenic variants in residues D1184, I1185, C1188, K1191, D1196, and a stop codon at residue T1199, using as a model the yeast mitochondrial DNA polymerase protein, Mip1p.ResultsThe introduction of pathogenic variants C1188R (yV945R), and of a stop codon at residue T1199 (yT956X) abolished both polymerization and exonucleolysis in vitro. HsPolγ substitutions in residues D1184 (yD941), I1185 (yI942), K1191 (yK948) and D1196 (yD953) shifted the balance between polymerization and exonucleolysis in favor of exonucleolysis. HsPolγ pathogenic variants at residue K1191 (yK948) and D1184 (yD941) were capable of nucleotide incorporation albeit with reduced processivity. Structural analysis of mitochondrial DNAPs showed that residue HsPolγ-N864 is placed in an optimal distance to interact with the 3′ end of the primer and the phosphate backbone previous to the 3′ end. Amino acid changes in residue HsPolγ-N864 to Ala, Ser or Asp result in enzymes that did not decrease their polymerization activity on short templates but exhibited a substantial decrease for processive DNA synthesis.ConclusionOur data suggest that in mitochondrial DNA polymerases multiple amino acids are involved in the primer-stand stabilization.     

超嗜热古菌Thermococcus eurythermalis A501编码B家族DNA聚合酶的生化特性及PCR应用

DNA聚合酶广泛应用于PCR技术,在生命科学研究及相关领域发挥重要作用。但目前商业化DNA聚合酶仍不能完全满足科研需要,有必要寻求高性能DNA聚合酶。文中克隆表达了超嗜热古菌（Thermococcus eurythermalis）A501来源的B家族DNA聚合酶基因（NCBI数据库基因登录号为TEU＿RS04875）、表征该重组蛋白的生化特性、评价了其PCR应用。将删除intein蛋白序列的DNA聚合酶（Teu-PolB）进行体外重组表达,经亲和层析和离子交换层析纯化获得Teu-PolB蛋白;利用5′端带荧光标记的寡核苷酸作为底物,用尿素变性聚丙烯酰胺凝胶电泳鉴定Teu-PolB的生化特性;以噬菌体λDNA基因组为模板,探究Teu-PolB的PCR应用。结果显示,Teu-PolB具有DNA聚合酶活性和3′→5′核酸外切酶活性,该酶在98℃下的半衰期约为2 h,热稳定性高。使用Teu-PolB进行PCR扩增,最适PCR缓冲液为50 mmol/L Tris-HCl pH 8.0,2.5 mmol/L MgCl₂,60 mmol/L KCl,10 mmol/L （NH<...