Molecular shape and binding force of Mycoplasma mobile’s leg protein Gli349 revealed by an AFM study

Recent studies of the gliding bacteria Mycoplasma mobile have identified a family of proteins called the Gli family which was considered to be involved in this novel and yet fairly unknown motility system. The 349 kDa protein called Gli349 was successfully isolated and purified from the bacteria, and electron microscopy imaging and antibody experiments led to the hypothesis that it acts as the “leg” of M. mobile, responsible for attachment to the substrate as well as for gliding motility. However, more precise evidence of the molecular shape and function of this protein was required to asses this theory any further. In this study, an atomic force microscope (AFM) was used both as an imaging and a force measurement device to provide new information about Gli349 and its role in gliding motility. AFM images of the protein were obtained revealing a complex structure with both rigid and flexible parts, consistent with previous electron micrographs of the protein. Single-molecular force spectroscopy experiments were also performed, revealing that Gli349 is able to specifically bind to sialyllactose molecules and withstand unbinding forces around 70 pN. These findings strongly support the idea that Gli349 is the “leg” protein of M. mobile, responsible for binding and also most probably force generation during gliding motility.     

Localization of P42 and F1-ATPase α-Subunit Homolog of the Gliding Machinery in Mycoplasma mobile Revealed by Newly Developed Gene Manipulation and Fluorescent Protein Tagging

Mycoplasma mobile has a unique mechanism that enables it to glide on solid surfaces faster than any other gliding mycoplasma. To elucidate the gliding mechanism, we developed a transformation system for M. mobile based on a transposon derived from Tn4001. Modification of the electroporation conditions, outgrowth time, and colony formation from the standard method for Mycoplasma species enabled successful transformation. A fluorescent-protein tagging technique was developed using the enhanced yellow fluorescent protein (EYFP) and applied to two proteins that have been suggested to be involved in the gliding mechanism: P42 (MMOB1050), which is transcribed as continuous mRNA with other proteins essential for gliding, and a homolog of the F₁-ATPase α-subunit (MMOB1660). Analysis of the amino acid sequence of P42 by PSI-BLAST suggested that P42 evolved from a common ancestor with FtsZ, the bacterial tubulin homologue. The roles of P42 and the F₁-ATPase subunit homolog are discussed as part of our proposed gliding mechanism.     

Force and velocity of mycoplasma mobile gliding

The effects of temperature and force on the gliding speed of Mycoplasma mobile were examined. Gliding speed increased linearly as a function of temperature from 0.46 microm/s at 11.5 degrees C to 4.0 microm/s at 36.5 degrees C. A polystyrene bead was attached to the tail of M. mobile using a polyclonal antibody raised against whole M. mobile cells. Cells attached to beads glided at the same speed as cells without beads. When liquid flow was applied in a flow chamber, cells reoriented and moved upstream with reduced speeds. Forces generated by cells at various gliding speeds were calculated by multiplying their estimated frictional drag coefficients with their velocities relative to the liquid. The gliding speed decreased linearly with force. At zero speed, the force measurements extrapolated to 26 pN at 22.5 and 27.5 degrees C. At zero force, the speed extrapolated to 2.3 and 3.3 microm/s at 22.5 and 27.5 degrees C, respectively--the same speeds as those observed for free gliding cells. Cells attached to beads were also trapped by an optical tweezer, and the stall force was measured to be 26 to 28 pN (17.5 to 27.5 degrees C). The gliding speed depended on temperature, but the maximum force did not, suggesting that the mechanism is composed of at least two steps, one that generates force and another that allows displacement. Other implications of these results are discussed.     

Temperature dependence of force, velocity, and processivity of single kinesin molecules

Using the bead assay in optical microscopy equipped with optical tweezers, we have examined the effect of temperature on the gliding velocity, force, and processivity of single kinesin molecules interacting with a microtubule between 15 and 35 degrees C. The gliding velocity increased with the Arrhenius activation energy of 50 kJ/mol, consistent with the temperature dependence of the microtubule-dependent ATPase activity. Also, the average run length, i.e., a measure of processivity of kinesin, increased on increasing temperature. On the other hand, the generated force was independent of temperature, 7.34 +/- 0.33 pN (average +/- S.D., n = 70). The gliding velocities decreased almost linearly with an increase in force irrespective of temperature, implying that the efficiency of mechano-chemical energy conversion is maintained constant in this temperature range. Thus, we suggest that the force generation is attributable to the temperature-insensitive nucleotide-binding state(s) and/or conformational change(s) of kinesin-microtubule complex, whereas the gliding velocity is determined by the ATPase rate.     

Operational Principles for the Dynamics of the In Vitro ParA-ParB System

In many bacteria the ParA-ParB protein system is responsible for actively segregating DNA during replication. ParB proteins move by interacting with DNA bound ParA-ATP, stimulating their unbinding by catalyzing hydrolysis, that leads to rectified motion due to the creation of a wake of depleted ParA. Recent in vitro experiments have shown that a ParB covered magnetic bead can move with constant speed over a DNA covered substrate that is bound by ParA. It has been suggested that the formation of a gradient in ParA leads to diffusion-ratchet like motion of the ParB bead but how it forms and generates a force is still a matter of exploration. Here we develop a deterministic model for the in vitro ParA-ParB system and show that a ParA gradient can spontaneously form due to any amount of initial spatial noise in bound ParA. The speed of the bead is independent of this noise but depends on the ratio of the range of ParA-ParB force on the bead to that of removal of surface bound ParA by ParB. We find that at a particular ratio the speed attains a maximal value. We also consider ParA rebinding (including cooperativity) and ParA surface diffusion independently as mechanisms for ParA recovery on the surface. Depending on whether the DNA covered surface is undersaturated or saturated with ParA, we find that the bead can accelerate persistently or potentially stall. Our model highlights key requirements of the ParA-ParB driving force that are necessary for directed motion in the in vitro system that may provide insight into the in vivo dynamics of the ParA-ParB system.     

In vitro and in vivo analyses of the role of the carboxysomal β-type carbonic anhydrase of the cyanobacterium Synechococcus elongatus in carboxylation of ribulose-1,5-bisphosphate

The carboxylase activities of crude carboxysome preparations obtained from the wild-type Synechococcus elongatus strain PCC 7942 strain and the mutant defective in the carboxysomal carbonic anhydrase (CA) were compared. The carboxylation reaction required high concentrations of bicarbonate and was not even saturated at 50 mM bicarbonate. With the initial concentrations of 50 mM and 25 mM for bicarbonate and ribulose-1,5-bisphosphate (RuBP), respectively, the initial rate of RuBP carboxylation by the mutant carboxysome (0.22 μmol mg^?1 protein min^?1) was only 30 % of that observed for the wild-type carboxysomes (0.71 μmol mg^?1 protein min^?1), indicating the importance of the presence of CA in efficient catalysis by ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco). While the mutant defective in the ccmLMNO genes, which lacks the carboxysome structure, could grow under aeration with 2 % (v/v) CO₂ in air, the mutant defective in ccaA as well as ccmLMNO required 5 % (v/v) CO₂ for growth, indicating that the cytoplasmically localized CcaA helped utilization of CO₂ by the cytoplasmically localized Rubisco by counteracting the action of the CO₂ hydration mechanism. The results predict that overexpression of Rubisco would hardly enhance CO₂ fixation by the cyanobacterium at CO₂ levels lower than 5 %, unless Rubisco is properly organized into carboxysomes.     

Enhancement of the thermostability of a recombinant β-agarase, AgaB, from Zobellia galactanivorans by random mutagenesis

Random mutagenesis was performed on β-agarase, AgaB, from Zobellia galactanivorans to improve its catalytic activity and thermostability. The activities of three mutants E99K, T307I and E99K–T307I were approx. 140, 190 and 200%, respectively, of wild type β-agarase (661 U/mg) at 40°C. All three mutant enzymes were stable up to 50°C and E99K–T307I had the highest thermostability. The melting temperature (T _m) of E99K–T307I, determined by CD spectra, was increased by 5.2°C over that of the wild-type enzyme (54.6°C). Activities of both the wild-type and E99K–T307I enzymes, as well as their overall thermostabilities, increased in 1 mM CaCl₂. The E99K–T307I enzyme was stable at 55°C with 1 mM CaCl₂, reaching 260% of the activity the wild-type enzyme held at 40°C without CaCl₂.     

A multiplexed magnetic tweezer with precision particle tracking and bi-directional force control

Background

In the past two decades, methods have been developed to measure the mechanical properties of single biomolecules. One of these methods, Magnetic tweezers, is amenable to acquisition of data on many single molecules simultaneously, but to take full advantage of this "multiplexing" ability, it is necessary to simultaneously incorporate many capabilities that have been only demonstrated separately.

Methods

Our custom built magnetic tweezer combines high multiplexing, precision bead tracking, and bi-directional force control into a flexible and stable platform for examining single molecule behavior. This was accomplished using electromagnets, which provide high temporal control of force while achieving force levels similar to permanent magnets via large paramagnetic beads.

Results

Here we describe the instrument and its ability to apply 2–260 pN of force on up to 120 beads simultaneously, with a maximum spatial precision of 12 nm using a variety of bead sizes and experimental techniques. We also demonstrate a novel method for increasing the precision of force estimations on heterogeneous paramagnetic beads using a combination of density separation and bi-directional force correlation which reduces the coefficient of variation of force from 27% to 6%. We then use the instrument to examine the force dependence of uncoiling and recoiling velocity of type 1 fimbriae from Eschericia coli (E. coli) bacteria, and see similar results to previous studies.

Conclusion

This platform provides a simple, effective, and flexible method for efficiently gathering single molecule force spectroscopy measurements.

     

Whole Surface Image of Mycoplasma mobile,Suggested by Protein Identification and Immunofluorescence Microscopy

Mycoplasma mobile, a freshwater fish pathogen featured with robust gliding motility, binds to the surface of the gill, where it then colonizes. Here, to obtain a whole image of its cell surface, we identified the proteins exposed on the surface using the following methods. (i) The cell surface was labeled with sulfosuccinimidyl-6-(biotinamido) hexanoate and recovered by an avidin column. (ii) The cells were subjected to phase partitioning using Triton X-114, and the hydrophobic proteins were recovered. (iii) The membrane fraction was analyzed by two-dimensional gel electrophoresis. These recovered proteins were subjected to peptide mass fingerprinting, and a final list of 36 expressed surface proteins was established. The ratio of identified proteins to whole surface proteins was estimated through two-dimensional gel electrophoresis of the membrane fraction. The localization of three newly found proteins, Mvsps C, E, and F, has been clarified by immunofluorescence microscopy. Integrating all information, a whole image of the cell surface showed that the proteins for gliding that were localized at the base of the protrusion of flask-shaped M. mobile account for more than 12% of all surface proteins and that Mvsps, surface variants that were localized at both parts other than the neck, account for 49% of all surface proteins.     

Plant growth promoting rhizobacteria alleviate salinity induced negative effects on growth, oil content and physiological status in Mentha arvensis

This study was aimed to investigate the effect of inoculation on three salt-tolerant, plant-growth-promoting rhizobacteria (PGPR) STR2 (Bacillus pumilus), STR8 (Halomonas desiderata) and STR36 (Exiguobacterium oxidotolerans), for their growth-promoting potential and efficacy in augmenting salt tolerance in Mentha arvensis, an essential oil-bearing crop and natural source of l-menthol, under varying levels of NaCl stress (0, 100, 300 and 500 mM) imposed through irrigating water. Increase in the levels of salt concentration led to a decrease in the growth, fresh weight, leaf–stem ratio, oil content and yield. However, the negative effects of salinity were observed to be convalesced in the PGPR inoculated plants. At salinity levels of 100 and 300 mM NaCl, H. desiderata inoculated plants recorded the highest herb yield, whereas at 500 mM NaCl, the plants inoculated with E. oxidotolerans yielded maximum herb. The oil content in non-inoculated, salt-stressed plants was observed to be 0.46, 0.42 and 0.35 % at 100, 300 and 500 mM NaCl, respectively, whereas the plants inoculated with H. desiderata recorded the oil content of 0.71 and 0.60 and 0.48 % at similar levels of NaCl stress, respectively. The halotolerant PGPR minimized the deleterious effects of salt toxicity producing at par or higher yields at lower and medium salinity levels (100, 300 mM NaCl) than the un-inoculated non-salt-stressed plants through improved foliar nutrient uptake and enhanced antioxidant machinery. Based on the results of the experiments reported herein, the use of salt-tolerant, plant-growth-promoting bacteria may provide an effective means of facilitating M. arvensis growth in salt-stressed environments.     

Increased Resistance to Cd(II) in the Primitive Red Algae Cyanidioschyzon merolae

Growth of Cyanidioschyzon merolae was inhibited depending on the cadmium(II) concentration in the culture medium. Although a lower level (0.01 mM) of Cd(II) inhibited growth by a factor of 0.5, higher levels (0.1 and 1 mM) induced lag periods of 10–14 days. Algal cells pretreated with 1 mM Cd(II) for 27 days grew steadily in 1 mM Cd(II) without the lag period, demonstrating that the cells became Cd(II) resistant (CdR). Cells remained resistant after four cycles (7 days per cycle) of washing and re-growing in medium without Cd(II), while intracellular Cd(II) decreased to undetectable levels. These results suggest that the Cd(II)-resistant phenotype is heritable. This phenomena may be attributable to the presence of genetic inhomogeneity in the wild-type cell populations or to mutagenesis caused by Cd(II) stress. Intracellular Cd(II) levels significantly decreased in the CdR phenotype compared to the wild-type cells, indicating that resistant cells may have a defective gene that codes for Cd(II)-uptake protein or the ability to secrete Cd(II).     

Oxygen mass transfer and scale-up studies in baffled roller bioreactors

Oxygen mass transfer was studied in conventional, bead mill and baffled roller bioreactors. Using central composite rotational design, impacts of size, rotation speed and working volume on the oxygen mass transfer were evaluated. Baffled roller bioreactor outperformed its conventional and bead mill counterparts, with the highest k _L a obtained in these configurations being 0.58, 0.19, 0.41 min^?1, respectively. Performances of the bead mill and baffled roller bioreactor were only comparable when a high bead loading (40 %) was applied. Regardless of configuration increase in rotation speed and decrease in working volume improved the oxygen mass transfer rate. Increase in size led to enhanced mass transfer and higher k _L a in baffled roller bioreactor (0.49 min^?1 for 2.2 L and 1.31 min^?1 for 55 L bioreactors). Finally, the experimentally determined k _L a in the baffled roller bioreactors of different sizes fit reasonably well to an empirical correlation describing the k _L a in terms of dimensionless numbers.     

A new antibacterial amino phenyl pyrrolidone derivative from a novel marine gliding bacterium Rapidithrix thailandica

A recently described marine gliding bacterium Rapidithrix thailandica strain TISTR 1741 was isolated from biofilm specimen collected from the Andaman Sea in Thailand. Four liters fermentation broth of R. thailandica TISTR 1741 cultivated in VY/2 medium were extracted with methanol to yield a novel amino phenyl pyrrolidone derivative compound (1) with antibacterial activities. The chemical structure and physico-chemical properties of 1 were investigated by spectrometry techniques. Compound 1 exhibited selective inhibition against vancomycin-resistant Enterococcus faecalis (VRE) with the MIC of 5.97 mM.     

2-Ketogluconic Acid Secretion by Incorporation of Pseudomonas putida KT 2440 Gluconate Dehydrogenase (gad) Operon in Enterobacter asburiae PSI3 Improves Mineral Phosphate Solubilization

Enterobacter asburiae PSI3 is known to efficiently solubilize rock phosphate by secretion of approximately 50 mM gluconic acid in Tris-buffered medium in the presence of 75 mM glucose and in a mixture of seven aldosugars each at 15 mM concentration, mimicking alkaline vertisol soils. Efficacy of this bacterium in the rhizosphere requires P release in the presence of low amount of sugars. To achieve this, E. asburiae PSI3 has been manipulated to express gluconate dehydrogenase (gad) operon of Pseudomonas putida KT 2440 to produce 2-ketogluconic acid. E. asburiae PSI3 harboring gad operon had 438 U of GAD activity, secreted 11.63 mM 2-ketogluconic and 21.65 mM gluconic acids in Tris-rock phosphate-buffered medium containing 45 mM glucose. E. asburiae PSI3 gad transformant solubilized 0.84 mM P from rock phosphate in TRP-buffered liquid medium. In the presence of a mixture of seven sugars each at 12 mM, the transformant brought about a drop in pH to 4.1 and released 0.53 mM P.     

Biodegradation of Methyl Orange by alginate-immobilized Aeromonas sp. in a packed bed reactor: external mass transfer modeling

Azo dyes are recalcitrant and xenobiotic nature makes these compounds a challenging task for continuous biodegradation up to satisfactorily levels in large-scale. In the present report, the biodegradation efficiency of alginate immobilized indigenous Aeromonas sp. MNK1 on Methyl Orange (MO) in a packed bed reactor was explored. The experimental results were used to determine the external mass transfer model. Complete MO degradation and COD removal were observed at 0.20 cm bead size and 120 ml/h flow rate at 300 mg/l of initial dye concentration. The degradation of MO decreased with increasing bead sizes and flow rates, which may be attributed to the decrease in surface of the beads and higher flux of MO, respectively. The experimental rate constants (k _ps) for various beads sizes and flow rates were calculated and compared with theoretically obtained rate constants using external film diffusion models. From the experimental data, the external mass transfer effect was correlated with a model J _D = K Re ^?(1 ? n). The model was tested with K value (5.7) and the Colburn factor correlation model for 0.20, 0.40 and 0.60 bead sizes were J _D = 5.7 Re ^?0.15, J _D = 5.7 Re ^?0.36 and J _D = 5.7 Re ^?0.48, respectively. Based on the results, the Colburn factor correlation models were found to predict the experimental data accurately. The proposed model was constructive to design and direct industrial applications in packed bed reactors within acceptable limits.     

Culture and Motion Analysis of Diatom Bacillaria paradoxa on a Microfluidic Platform

We proved the feasibility of using a microfluidic chip to culture diatom Bacillaria paradoxa, and analyzed the gliding characteristics of its self-organized colony in detail. The optimal cultivation parameters of B. paradoxa for the designed chip made with polydimethylsiloxane are as follows: the preferable cells injecting rate for keeping the cells alive is 0.2 mL/h, the initial cell density for fast reproduction is 5.5 × 10⁴ cells/mL, and the optimal replacement period of culture medium is 4 days. B. paradoxa tends to form a colony during their growth, and the colony can glide with a steady period of 29 ± 3 s along its axial direction in a constant stream, the amplitude of the colony will not decay (e.g., 24 μm of two-cell colony at 1.1 mm/s flow rate), and the colony rapidly adjusts its direction of gliding to the direction of water flow. The successful culture of diatoms on a microfluidic platform may be used for biosensing chips and the creation of gasoline-producing diatom solar panels.     

Cloning,Heterologous Expression,Purification and Characterization of M12 Mutant of Aspergillus niger Glucose Oxidase in Yeast Pichia pastoris KM71H

Aspergillus niger glucose oxidase (GOx) genes for wild-type (GenBank accession no. X16061, swiss-Prot; P13006) and M12 mutant (N2Y, K13E, T30 V, I94 V, K152R) were cloned into pPICZαA vector for expression in Pichia pastoris KM71H strain. The highest expression level of 17.5 U/mL of fermentation media was obtained in 0.5 % (v/v) methanol after 9 days of fermentation. The recombinant GOx was purified by cross-flow ultrafiltration using membranes of 30 kDa molecular cutoff and DEAE ion-exchange chromatography at pH 6.0. Purified wt GOx had k _cat of 189.4 s^?1 and K _m of 28.26 mM while M12 GOx had k _cat of 352.0 s^?1 and K _m of 13.33 mM for glucose at pH 5.5. Specificity constants k _cat/K _m of wt (6.70 mM^?1 s^?1) and M12 GOx (26.7 mM^?1 s^?1) expressed in P. pastoris KM71H were around three times higher than for the same enzymes previously expressed in Saccharomyces cerevisiae InvSc1 strain. The pH optimum and sugar specificity of M12 mutant of GOx remained similar to the wild-type form of the enzyme, while thermostability was slightly decreased. M12 GOx expressed in P. pastoris showed three times higher activity compared to the wt GOx toward redox mediators like N,N-dimethyl-nitroso-aniline used for glucose strips manufacturing. M12 mutant of GOx produced in P. pastoris KM71H could be useful for manufacturing of glucose biosensors and biofuel cells.     

Triskelion Structure of the Gli521 Protein,Involved in the Gliding Mechanism of Mycoplasma mobile

Mycoplasma mobile binds to solid surfaces and glides smoothly and continuously by a unique mechanism. A huge protein, Gli521 (521 kDa), is involved in the gliding machinery, and it is localized in the cell neck, the base of the membrane protrusion. This protein is thought to have the role of force transmission. In this study, the Gli521 protein was purified from M. mobile cells, and its molecular shape was studied. Gel filtration analysis showed that the isolated Gli521 protein forms mainly a monomer in Tween 80-containing buffer and oligomers in Triton X-100-containing buffer. Rotary shadowing electron microscopy showed that the Gli521 monomer consisted of three parts: an oval, a rod, and a hook. The oval was 15 nm long by 11 nm wide, and the filamentous part composed of the rod and the hook was 106 nm long and 3 nm in diameter. The Gli521 molecules form a trimer, producing a “triskelion” reminiscent of eukaryotic clathrin, through association at the hook end. Image averaging of the central part of the triskelion suggested that there are stable and rigid structures. The binding site of a previously isolated monoclonal antibody on Gli521 images showed that the hook end and oval correspond to the C- and N-terminal regions, respectively. Partial digestion of Gli521 showed that the molecule could be divided into three domains, which we assigned to the oval, rod, and hook of the molecular image. The Gli521 molecule''s role in the gliding mechanism is discussed.Mycoplasmas are commensal and occasionally parasitic bacteria with small genomes that lack a peptidoglycan layer (31). Several mycoplasma species form membrane protrusions, such as the headlike structure in Mycoplasma mobile and the attachment organelle in Mycoplasma pneumoniae (15, 19, 21, 22, 25, 33, 34, 36). On solid surfaces, these species exhibit gliding motility in the direction of the protrusion; this motility is believed to be involved in the pathogenicity of mycoplasmas (12, 13, 16, 20, 21). Interestingly, mycoplasmas have no surface flagella or pili, and their genomes contain no genes related to other known bacterial motility systems. In addition, no homologs of motor proteins that are common in eukaryotic motility have been found (11).M. mobile, which was isolated from the gills of a freshwater fish in the early 1980s, is a fast gliding mycoplasma (14). It glides smoothly and continuously on glass at an average speed of 2.0 to 4.5 μm/s, or three to seven times the length of the cell per second, exerting a force of up to 27 pN (8, 9, 24, 25, 32). Previously, we identified huge proteins involved in this gliding mechanism that are localized at the so-called cell neck, the base of the membrane protrusion (17, 26, 30, 35, 37, 39); we also visualized the putative machinery and the binding protein (1, 18, 23) and identified both the direct energy source used and the direct binding target (10, 27, 38). The force generated by the gliding machinery may be supported from inside the cell by a cytoskeletal “jellyfish” structure (28, 29). On the basis of these results, we proposed a working model, called the centipede or power stroke model, where cells are propelled by “legs” composed of Gli349 that repeatedly catch and release sialic acids fixed on the glass surface (5, 19, 21). These legs are driven by the force exerted by P42 through Gli521 molecules, which is supported by the jellyfish structure, based on energy from ATP hydrolysis.The Gli521 protein, which has an unusually high molecular mass (521 kDa), is suggested to have the role of force transmission, because a monoclonal antibody against this protein stops gliding, keeping the cells on a solid surface (35). About 450 molecules are estimated to be clustered in the gliding machinery with other component proteins, although their alignment has not been clarified (35, 37, 39). In this study, we isolated the Gli521 protein and studied its molecular shape using electron microscopy (EM) and biochemical analyses in order to understand the gliding mechanism.     

Plasmolysis effects and osmotic potential of two phylogenetically distinct alpine strains of Klebsormidium (Streptophyta)

The osmotic potential and effects of plasmolysis were investigated in two different Klebsormidium strains from alpine habitats by incubation in 300–2,000 (3,000) mM sorbitol. Several members of this genus were previously found to tolerate desiccation in the vegetative state yet information was lacking on the osmotic potentials of these algae. The strains were morphologically determined as Klebsormidium crenulatum and Klebsormidium nitens. These species belong to distinct clades, as verified by phylogenetic analysis of the rbcL gene. K. crenulatum is part of to the K. crenulatum/mucosum (‘F’ clade) and K. nitens of the ‘E2’ clade. Plasmolysis occurred in K. crenulatum at 800 mM sorbitol (961 mOsmol kg^?1, Ψ?=??2.09 MPa) and in K. nitens at 600 mM sorbitol (720 mOsmol kg^?1, Ψ?=??1.67 MPa). These are extraordinarily high osmotic values (very negative osmotic potentials) compared with values reported for other green algae. In K. crenulatum, the maximum photosynthetic rate (Pmax) in the light-saturated range was 116 μmol O₂ h^?1 mg^?1 chl a. Incubation in 1,000 mM sorbitol decreased Pmax to 74.1% of the initial value, whereas 2,000 mM sorbitol (Ψ?=??5.87 MPa) lead to an almost complete loss of oxygen production. In K. nitens, Pmax was 91 μmol O₂ h^?1 mg^?1 chl a under control conditions and incubation in 800 mM sorbitol did not decrease Pmax, 2,000 mM sorbitol decreased Pmax only to about 62.6% of the initial value whereas 3,000 mM sorbitol stopped oxygen evolution. This indicated a broader amplitude for photosynthesis in the examined strain of K. nitens. Control samples and samples plasmolysed for 3 h in 800 mM sorbitol (K. nitens), 1,000 mM sorbitol (K. crenulatum), or 2,000 mM sorbitol were investigated by transmission electron microscopy after chemical or high-pressure freeze fixation. In cells undergoing plasmolysis the protoplasts were retracted from the cell wall, the cytoplasm appeared dense, vacuoles were small and fragmented, and the cytoplasm was filled with ribosomes. Thin cytoplasmic strands were connected to the cell wall; 2,000 mM sorbitol increased the effect. The content of soluble carbohydrates in these two strains was investigated by HPLC, as this is one known mechanism for cells to maintain high osmotic pressure of the cytosol. Both Klebsormidium species contained diverse soluble carbohydrates, including a dominant mixed peak of unidentified oligosaccharides, and more minor amounts of raffinose, sucrose, glucose, xylose, galactose, mannose, inositol, fructose, glycerol, mannitol, and sorbitol. The total content of soluble carbohydrates was approximately 1.2% of the dry weight, indicating that this is not a major factor contributing to the high osmotic potential in these strains of Klebsormidium.