Norfloxacin Sorption to Different Fractions in Sediments from Typical Water Systems in China

Sorption isotherms of Norfloxacin (NOF) to different fractions from six typical sediments in China were determined to compare the NOF sorption behavior and contribution of different fractions to total sorption. All sorption isotherms were nonlinear and fitted well with the Freundlich model. Sorption coefficients (K _f) by original sediments changed in larger magnitude, from 114 (mg/g)/(mg/L)ⁿ to 5271 (mg/g)/(mg/L)ⁿ, and black carbon with more aromatic carbon has more sorption capacity and nonlinearity. The sorption capacity K _f values were found to significantly correlate with SSA (specific surface area), OC (organic carbon), BC (black carbon), and TON (total organic nitrogen) (p < 0.05), but had no obvious relation with pH, CEC (cation exchange capacity), TOC/TON, and BC/TOC. The DOC removed, NaOH extracted, and 375°C heated fractions showed more nonlinear sorption than the original sediments, suggesting more heterogeneous sorption sites in these fractions. Among different sediment fractions, the 375°C heating fractions were responsible for >50% of the total NOF sorption over the whole concentration range. The contribution of DOC removed fractions to the total sorption was the highest at higher NOF concentration.     

Factors affecting the metal ion-hydroxamate interactions II: effect of the length of the connecting chain on the Fe(III), Mo(VI) and V(V) complexation of some new desferrioxamine B (DFB) model dihydroxamic acids

Three new dihydroxamic acids (HO(CH₃)NCO-(CH₂)₂-CO-NH-(CH₂)_x-CON(CH₃)OH where the x values are 4; 3 and 2, and the compounds are abbreviated as 2,4-DIHA, 2,3-DIHA and 2,2-DIHA), containing the peptide group in a certain position to one of the two functional groups and in different distances to the other one, were synthesized and their complexation with Fe(III), Mo(VI) and V(V) was studied by pH-potentiometric, spectrophotometric and in some cases by CV methods to evaluate the redox behaviour of the Fe(III) complexes and assess their potential biological activity as siderophore models. All these compounds are structural models for the natural siderophore, desferrioxamine B (DFB). The results were compared to those of the complexes of 2,5-DIHA having the same connecting chain structure and length as DFB has, and the effects of the length of the connecting chain on the co-ordination mode and on the stability of the complexes formed were evaluated.Very similar stability of the mono-chelated complexes formed with all these dihydroxamic acids was found. All the results obtained suggest that one dihydroxamic acid (even the 2,2-DIHA) is able to complete the four coordination sites of a MoO₂ ²⁺ core forming simple mononuclear complexes. Favoured monomeric structures of the bis-chelated complexes of these dihydroxamic acids are also suggested with V(V) having the smallest ionic radius among the three metal ions studied. In the case of iron(III), however, clear indication was obtained for the slightly different complexation behaviour of 2,2-DIHA. Namely, the formation of the mononuclear bis-chelated complex with this shortest ligand seems to have sufficient strain to induce the formation of bimetallic species such as [Fe(2,2-DIHA)₂Fe)]²⁺.     

Secondary ligand-metal interactions in rhodium(III) and iridium(III) phosphoramidite complexes

The synthesis, characterization, and application in asymmetric catalytic cyclopropanation of Rh(III) and Ir(III) complexes containing (S_a,R_C,R_C)-O,O′-[1,1′-binaphthyl-2,2′-diyl]-N,N′-bis[1-phenyl-ethyl]phosphoramidite (1) are reported. The X-ray structures of the half-sandwich complexes [MCl₂(C₅Me₅)(1,κP)] (M = Rh, 2a; M = Ir, 2b) show that the metal-phosphoramidite bond is significantly shorter in the Ir(III) analog. Chloride abstraction from 2a (with CF₃SO₃SiMe₃ or with CF₃SO₃Me) and from 2b (with AgSbF₆) gives the cationic species [MCl(C₅Me₅)(1,2-η-1,κP)]⁺ (M = Rh, 3a; M = Ir, 3b), which display a secondary interaction between the metal and a dangling phenethyl group (NCH(CH₃)Ph) of the phosphoramidite ligand, as indicated by NMR spectroscopic studies. Complexes 3a and 3b slowly decompose in solution. In the case of 3b, the binuclear species [Ir₂Cl₃(C₅Me₅)₂]⁺ is slowly formed, as indicated by an X-ray study. Preliminary catalytic tests showed that 3a cyclopropanates styrene with moderate yield (35%) and diastereoselectivity (70:30 trans:cis ratio) and with 32% ee (for the trans isomer).     

Polymerization study of o-Si(OH)4 and complexation with Am(III), Eu(III) and Cm(III)

The stability constants of Am⁺³, Cm³⁺ and Eu³⁺ with ortho silicate, were measured at pH 3.50 and in ionic strengths of 0.20-1.00 M (NaClO₄) by the solvent extraction method. The Am⁺³, Cm³⁺ and Eu³⁺ forms 1:1 complex with ortho silicate ion at pH 3.60 with the stability constant (log β₁) value of 8.02 ± 0.10, 7.78 ± 0.08 and 7.81 ± 0.11, respectively. The stability of these metal ions decrease with increased ionic strength from 0.20 to 1.00 M (NaClO₄) for silicic acid concentrations of 0.002-0.020 M. Increasing silicic acid concentration above 0.02 M increased the amount of M³⁺ extracted into the organic phase, contrary to the trend usually observed for increased ligand concentration in solvent extraction. This reversed trend is likely due to the extraction of cationic species of silicic acid by HDEHP. Aging time (60-300 min) had no effect on the stability constant of these metal ions for 0.002-0.020 M silicic acid at pH 3.50 and I = 0.20 M (NaClO₄).The fraction of polymeric silicic acid present in solutions of 0.20-4.50 M NaClO₄ solutions at pH 3.0-10.0, T = 0-60 °C and aging time = 5-300 min was measured for determination of the silicomolybdate reaction to ascertain the proper conditions to study metal-silicate complexation.     

Electron transfer. Part 169 . Delayed reduction of mononuclear manganeses(IV) using vanadium(III)

The tris-chelate formed by biguanide, H₂NC(NH)NHC(NH)NH₂, and Mn(IV) is one of the rarely encountered examples of water-stable mononuclear complexes of this oxidation state. This cation is reduced in aqueous acid by both V(II) and V(III). In contrast to the kinetically straightforward bimolecular reduction by V(II) in 0.5 M HClO₄ (k = 7.4 × 10³ M⁻¹ s⁻¹ at 22 °C), reductions by excess V(III) yield profiles which are linear (zero-order in Mn^IV) until the last few percent reaction. Analyses of these composite curves are consistent with the sequences

     

Removal of Arsenic(III) from Waste Water Using Lactobacillus acidophilus

Lactobacillus acidophilus was used for the removal of As(III) from 50–2000 ppb As(III)-containing water solution. Biosorption of As(III) by L. acidophilus was dependent on concentration (50 to 2000 ppb) and time (0 to 3 h).L. acidophilus(1 mg dry wt/ml) was able to remove 30, 60, 300, 420, 600 ppb As(III) from 50, 100, 500, 1000, and 2000 ppb of As(III)-containing water solution, respectively, within 3 h at pH 7. Moreover, by increasing the biomass of L. acidophilus(2 mg dry wt/ml) removal of As(III) was enhanced 1.66, 1.33, 1.16, 1.42, and 1.33 times, respectively. Fourier transform infrared (FTIR) and electron spectroscopy for chemical analysis (ESCA) spectrum of As(III)-loaded biomass was also investigated. An FTIR sample spectrum of L. acidophilus fresh biomass and As(III)-loaded biomass showed band stretching of fresh and As(III)-loaded biomass for O-H, 3423.43 to 3385.04 cm^?1, and for C-O, 1742.82 to 1731.14 cm^?1, and signified that –OH and –CO groups were also involved in the removal of As(III) from As(III)-containing water solution.     

Iron(III), chromium(III) and cobalt(II) complexes with squarate: Synthesis, crystal structure and magnetic properties

The preparation and variable temperature-magnetic investigation of three squarate-containing complexes of formula [Fe₂(OH)₂(C₄O₄)₂(H₂O)₄]·2H₂O (1) [Cr₂(OH)₂(C₄O₄)₂(H₂O)₄]·2H₂O (2) and [Co(C₄O₄)(H₂O)₄]_n (3) [H₂C₄O₄ = 3.4-dihydroxycyclobutene-1,2-dione (squaric acid)] together with the crystal structures of 1 and 3 are reported. Complex 1 contains discrete centrosymmetric [Fe₂(OH)₂(C₄O₄)₂(H₂O)₄] diiron(II) units where the iron pairs are joined by a di-μ-hydroxo bridge and two squarate ligands acting as bridging groups through adjacent oxygen atoms. Two coordinated water molecules in cis position complete the octahedral environment at each iron atom in 1. The iron-iron distance with the dinuclear unit is 3.0722(6) Å and the angle at the hydroxo bridge is 99.99(7)°, values which compare well with the corresponding ones in the isostructural compound 2 (2.998 Å and 99.47°) whose structure was reported previously. The crystal structure of 3 contains neutral chains of squarato-O¹,O³-bridged cobalt(II) ions where four coordinated water molecules complete the six-coordination at each cobalt atom. The cobalt-cobalt separation across the squarate bridge is 8.0595(4) Å. A relatively important intramolecular antiferromagnetic coupling occurs in 1 whereas it is very weak in 2, the exchange pathway being the same [J = −14.4 (1) and −0.07 cm⁻¹ (2), the spin Hamiltonian being defined as ]. A weak intrachain antiferromagnetic interaction between the high-spin cobalt(II) ions occurs in 3 (J = −0.30 cm⁻¹). The magnitude and nature of these magnetic interactions are discussed in the light of their respective structures and they are compared with those reported for related systems.     

Mononuclear single helices of lanthanum(III) and europium(III). Metal dependent diastereomeric excess

Using the 1:2 condensate of benzildihydrazone and 2-acetylpyridine as a tetradentate N donor ligand L, LaL(NO₃)₃ (1) and EuL(NO₃)₃ (2), which are pale yellow in colour, are synthesized. While single crystals of 1 could not be obtained, 2 crystallises as a monodichloromethane solvate, 2·CH₂Cl₂ in the space group Cc with a = 11.7099(5) Å, b = 16.4872(5) Å, c = 17.9224(6) Å and β = 104.048(4)°. From the X-ray crystal structure, 2 is found to be a rare example of monohelical complex of Eu(III). Complex 1 is diamagnetic. The magnetic moment of 2 at room temperature is 3.32 BM. Comparing the FT-IR spectra of 1 and 2, it is concluded that 1 also is a mononuclear single helix. ¹H NMR reveals that both 1 and 2 are mixtures of two diastereomers. In the case of the La(III) complex (1), the diastereomeric excess is only 10% but in the Eu(III) complex 2 it is 80%. The occurrence of diastereomerism is explained by the chiralities of the helical motif and the type of pentakis chelates present in 1 and 2.     

Biosorption of As(V) onto dried alligator weed root: role of metal (hydro) oxides

The present work investigates the adsorption of As(V) onto the dried powder of alligator weed root as bio-sorbent, using acid pre-treated alligator weed root powder as the reference. The isotherm study suggested there is a favorable As(V) adsorption happened on the AWR surface. The batch adsorption experimental results indicated that the ionic strength has little impact on the adsorption, while the solution pH has a significant effect on the adsorption with apparent inhibition appearing in both extreme acidic and alkaline pH region. In addition, the properties of the biosorbent were characterized by various techniques including SEM-EDS, FT-IR, and ICP detection. The analysis results suggested that the metals including Mn, Fe, and Al enrich over the alligator weed root surface in the morphology of metal (hydro) oxide. Based on the nature of the biosorbent and As(V) besides the adsorption performance, the metal (hydro) oxides over biosorbent surface is suggested as the essential role to drive the adsorption. With the metal (hydro) oxides denuded in the pre-treatment, the biosorbent loses its adsorption capability for As(V) totally.     

Overcoming cisplatin resistance using gold(III) mimics: anticancer activity of novel gold(III) polypyridyl complexes

Gold(III) compounds have been recognized as anticancer agents due to their structural and electronic similarities with currently employed platinum(II) species. An added benefit to gold(III) agents is the ability to overcome cisplatin resistance. This work identified four gold(III) compounds, [Au(Phen)Cl₂]PF₆, [Au(DPQ)Cl₂]PF₆, [Au(DPPZ)Cl₂]PF₆, and [Au(DPQC)Cl₂]PF₆, (Phen = 1,10-phenanthroline, DPQ = dipyrido[3,2-d:2′,3′-f]quinoxaline, DPPZ = dipyrido[3,2-a:2′,3′-c] phenazine, DPQC = dipyrido[3,2-d:2′,3′-f] cyclohexyl quinoxaline) that exhibited anticancer activity in both cisplatin sensitive and cisplatin resistant ovarian cancer cells. Two of these compounds, [Au(DPQ)Cl₂]PF₆ (AQ) and [Au(DPPZ)Cl₂]PF₆ (AZ), displayed exceptional anticancer activity and were the focus of more intensive mechanistic study. At the molecular level, AQ and AZ formed DNA adducts, generated free radicals, and upregulated pro-apoptotic signaling molecules (p53, caspases, PARP, death effectors). Taken together, these two novel gold(III) polypyridyl complexes exhibit potent antitumor activity in cisplatin resistant cancer cells. These activities may be mediated, in part, by the activation of apoptotic signaling.     

An unexpected influence of the nature of the amine on the crystal structure of some Co(III)-Bi(III) heterobimetallic complexes

Two novel cobalt(III)-bismuth(III) heterometallic compounds [Co(NxH)₂(An)₂]₂[Bi(EDTA)(H₂O)]₂ · 7H₂O (1) and [Co(NxH)₂(p-Tol)₂][Bi(EDTA)] · 4H₂O (2) [An-aniline, p-Tol-para-toluidine, NxH-1,2-cyclohexanedionedioximate-ion, EDTA-ethylenediaminetetraacetate-ion] have been synthesized and characterized by NMR, thermogravimetry and single X-ray crystallography. Substitution of the aniline by para-toluidine molecules leads to radical changes in the anionic sub-lattice: from monomeric form to polymeric one. The coordination number of bismuth is 7+1 in 1, and 8 in 2; Bi coordination polyhedron in 1 can be described as a two-capped trigonal prism, while in 2 as a dodecahedron. The Co atoms in 1 and 2 have an octahedral coordination. NMR spectroscopy in DMSO solution confirms the trans-configuration of the complex cations in 1 and 2 by observation of a broad singlet of two symmetric hydrogen bonds. The NCH₂CH₂N component of EDTA ligand is in the domain of the fast exchange and the signal from this group is a singlet, while four acetate methylene protons give rise to an AB quartet system. It was shown that thermolysis of 1 and 2 occurs in three successive stages, via the dehydration, pyrolysis of the ligands and, finally, the formation of a sillenite-type phase Bi_26−xCo_xO_40−δ and small quantities of Co₃O₄.     

Complexation study of europium(III) and curium(III) with urea in aqueous solution investigated by time-resolved laser-induced fluorescence spectroscopy

The complex formation of europium(III) and curium(III) with urea in aqueous solution has been studied at I = 0.1 M (NaClO₄), room temperature and trace metal concentrations in the pH-range of 1-8 at various ligand concentrations using time-resolved laser-fluorescence spectroscopy. While for curium(III) the luminescence maximum is red shifted upon complexation, in case of europium(III) emission wavelengths remain unaltered but a significant change in peak splitting occurs. Both heavy metals form weak complexes of the formulae ML³⁺ and MLOH²⁺ with urea. Stability constants were determined to be log β₁₁₀ = −0.12 ± 0.05 and log β_11-1 = −6.86 ± 0.15 for europium(III) and log β₁₁₀ = −0.28 ± 0.12 and log β_11-1 = −7.01 ± 0.15 for curium(III).     

Effect of pH and Salinity on Sorption of Antimony (III and V) on Mangrove Sediment,Sundarban, India

The extent of toxic metalloid retention and bioavailability and mobility in the sediment is of interest for understanding their biogeochemical cycling and for accurate risk assessment in an ecosystem. Intensification of monsoon and rainfall, believed to be related to global warming, could drive future changes of temperature, salinity, and pH distribution pattern affecting antimony cycling in the Sundarbans. This study investigated sorption kinetics of antimony (Sb) (III and V) as a function of temperature, salinity, and pH following the Langmuir model, and demonstrated that clayey silt type mangrove sediment was an effective adsorbent with higher efficiency for Sb (V) than Sb (III). Background level of Sb in the sediment was 0.35–0.78% of the maximum adsorption capacity (Γ_m). Out of the two distinct type of sorption sites governing mobility and bioavailability of Sb in the sediment, site 1 (Humic acid) showed higher affinity for Sb than the site II (oxyhydroxide). Sb adsorption was strongly influenced by temperature, salinity, and pH, which may be altered by long-term changes in climate and rainfall pattern.     

The photolysis of octachlorodirhenate(III) in chloroform

Under 254 nm irradiation in chloroform, [Re₂Cl₈]²⁻ is converted cleanly to [Re₂Cl₉]⁻. The reaction is initiated primarily through light absorbed by the chloroform. The experimental rate expression is , where I₀ is the incident light intensity and f_S is the fraction of light absorbed by the solvent. The rate law is consistent with mechanisms involving either [Re₂Cl₈]⁻ or [Re₂Cl₉]²⁻ as an intermediate.     

A sensitive method for determination of trace amounts of chromate (III) with terbium (III) sodium hexametaphosphate chelate as fluorescent probe

Based on the fluorescence quenching of Terbium (III)‐sodium hexametaphosphate (Tb/SHMP) chelates in the presence chromate (III), a sensitive fluorimetric method was developed for the determination of trace amounts of chromium (III) in aqueous solutions. Under the optimum conditions, the linear calibration graph was obtained (R = 0.996). The linear range and detection limit of Cr (III) were 7.69 × 10^?7 to 1.15 × 10^?4 mol L^?1 and 4.50 × 10^?7 mol L^?1, respectively. The proposed method had a wider linear range and was proved to be very sensitive, rapid and simple. The method was applied successfully to the determination of chromium (III) in the synthetic samples and real water samples. Moreover, the reaction mechanism was discussed through the fluorescence lifetime and proved to be dynamic quenching behavior. Copyright © 2010 John Wiley & Sons, Ltd.     

The Mechanism of Iron (III) Stimulation of Lipid Peroxidation

A study conducted on Fe²⁺ autoxidation showed that its rate was extremely slow at acidic pH values and increased by increasing the pH; it was stimulated by Fe³⁺ addition but the stimulation did not present a maximum at a Fe²⁺/Fe³⁺ ratio approaching 1:1. The species generated during Fe³⁺-catalyzed Fe²⁺ autoxidation was able to oxidize deoxyribose; the increased Fe²⁺ oxidation observed at higher pHs was paralleled by increased deoxyribose degradation. The species generated during Fe³⁺-catalyzed Fe²⁺ autoxidation could not initiate lipid peroxidation in phosphatidylcholine liposomes from which lipid hydroperoxides (LOOH) had been removed by treatment with triph-enylphosphine. Neither Fe²⁺ oxidation nor changes in the oxidation index of the liposomes due to lipid peroxidation were observed at pHs where the Fe³⁺ effect on Fe²⁺ autoxidation and on deoxyribose degradation was evident. In our experimental system, a Fe²⁺/Fe³⁺ ratio ranging from 1:3 to 2:1 was unable to initiate lipid peroxidation in LOOH-free phosphatidylcholine liposomes. By contrast Fe³⁺ stimulated the peroxidation of liposomes where increasing amounts of cumene hydroperoxide were incorporated. These results argue against the participation of Fe³⁺ in the initiation of LOOH-independent lipid peroxidation and suggest its possible involvement in LOOH-dependent lipid peroxidation.     

Effect of praseodymium(III) on zinc(II) species in human interstitial fluid

A multiphase model of metal ion species in human interstitial fluid was constructed under physiological conditions. The effect of Pr(III) on Zn(II) species was studied. At the normal conditions, Zn(II) species mainly distribute in [Zn(HSA)], [Zn(IgG)], and [Zn(Cys)₂H]⁺. With the Pr(III) level increased, the apparent competition of Pr(III) for ligands lead to the redistribution of Zn(II) species.     

Simultaneous determination of Fe(III) and Al(III) by first-derivative spectrophotometry and partial least-squares (PLS-2) method – Application to post-haemodialysis fluids

Derivative spectrophotometry (graphical method) and partial least-squares regression (numerical method) methods were developed for the spectrophotometric multi-component analysis of post-haemodialysis fluids and synthetic mixtures containing Al(III) and Fe(III) without any chemical separation. The complexes of these metal ions with chrome azurol S were formed immediately at pH 5.5 and were stable for at least 3h. The graphical method is based on the use of first-derivative spectra for evaluation because working wavelength determination was more precise and spectral overlap was less than in the ordinary spectra. Two wavelengths at which the complexes exhibited maximum absorption values for Fe(III) and Al(III) were selected as analytical wavelengths, i.e., 675 and 623.5nm, respectively. Lambert-Beer's law is obeyed between 0.0896-8.064mug/mL Fe(III) and 0.054-0.486mug/mL Al(III). Limits of detection for Fe(III) and Al(III) were 0.056 and 0.044mug/mL, respectively. The reproducibility, expressed as variation coefficients, for two sets of 10 standard mixtures containing 3.584mug/mL Fe(III) and 0.27mug/mL Al(III) were 1.9% and 2% for iron and aluminium, respectively. In the numerical method, a training set was randomly prepared by using 14 samples. The concentration of each component has been varied in the linear range of the analytical signal. The spectral regions between 510 and 720nm were selected for the analysis of the binary mixture of Fe(III)/Al(III). The proposed methods were validated by using synthetic binary mixtures and applied to the simultaneous determination of Fe(III) and Al(III) in post-haemodialysis samples. The obtained results were compared with each other; in general, both multi-component methods gave rise to similar recovery results for laboratory-prepared mixtures and real samples.     

负载型纳米铁制备条件对As(V)吸附的影响

以活性炭为载体,制备了负载型纳米铁除砷吸附剂.以除砷效率为目标,优化了制备过程中活性炭的不同粒径、铁盐种类及浓度、反应温度及速度、铁盐浸泡活性炭时间及反应平衡时间等参数.考虑到除砷效率及工程实际的应用,室温时采取活性炭粒径为20～40目、KBH4的滴加速率为lml·min-1、活性炭经铁盐为质量浓度为6.9％的硫酸亚铁浸泡30 min,反应平衡时间为30 min时所制备的吸附剂综合除砷效果最好(98％).