Introduction to the Treatment of Polluted Sediments

This paper overviews the large variety of remediation options for polluted sediments that are currently available. These include physico-chemical and biological techniques that can be applied in situ or ex site.     

Metal Pollution Assessment in Sediments of the Southeastern Black Sea Coast of Turkey

The main objective of this investigation is to determine the concentration and accumulation of heavy metals in the coastal sediments of the Southeastern Black Sea of Turkey. The selected sampling area has mainly been affected by anthropogenic activities, such as agricultural, untreated domestic and treated industrial wastewater, and mining. Metal enrichment factor (EF), geo-accumulation index (I_geo), and metal pollution index (MPI) have been calculated and relative contamination levels evaluated at all stations. In this study, the maximum EF values calculated for nickel (Ni), cobalt (Co), cadmium (Cd), lead (Pb), chromium (Cr), arsenic (As), zinc (Zn), and copper (Cu) were 1.4, 3.1, 5.2, 7.8, 7.8, 20, 26, and 42, respectively. Metal pollution has decreased in recent years, but the enrichment of heavy metals has been observed to be relatively high, especially in the uppermost 3-6 cm of the core sample from the Sürmene sampling station, which has been polluted by mining activities. In addition, factor analysis revealed that the coastal sediments from the Eastern Black Sea were influenced by several sources, namely lithogenic and anthropogenic activities (mining, wastewater discharging, agriculture).     

Functional-Structural Analysis of Nitrogen-Cycle Bacteria in a Hypersaline Mat from the Omani Desert

Anaerobic microbial activity in northern peat soils most often results in more carbon dioxide (CO ₂ ) production than methane (CH₄) production. This study examined why methanogenic conditions (i.e., equal molar amounts of CH₄ production and CO₂ production) prevail so infrequently. We used peat soils from two ombrotrophic bogs and from two rheotrophic fens. The former two represented a relatively dry bog hummock and a wet bog hollow, and the latter two represented a forested fen and a sedge-dominated fen. We quantified gas production rates in soil samples incubated in vitro with and without added metabolic substrates (glucose, ethanol, H₂/CO₂). None of the peat soils exhibited methanogenic conditions when incubated in vitro for a short time (< 5 days) and without added substrates. Incubating some samples > 50 days without added substrates led to methanogenic conditions in only one of four experiments. The anaerobic CO₂:CH₄ production ratio ranged from 5:1 to 40:1 in peat soil without additions and was larger in samples from the dry bog hummock and forested fen than the wet bog hollow and sedge fen. Adding ethanol or glucose separately to peat soils led to methanogenic conditions within 5 days after the addition by stimulating rates of CH₄ production, suggesting CH₄ production from both hydrogenotrophic and acetoclastic methanogenesis. Our results suggest that methanogenic conditions in peat soils rely on a constant supply of easily decomposable metabolic substrates. Sample handling and incubation procedures might obscure methanogenic conditions in peat soil incubated in vitro.     

Development and Placement of a Sorbent-Amended Thin Layer Sediment Cap in the Anacostia River

Incorporating materials into sediment caps that can sequester contaminants will greatly improve their ability to isolate contaminants in the underlying sediments from the rest of the aquatic environment. For highly sorptive media a thin layer (cm) may be sufficient, but accurately placing a thin layer (cm) of material over submerged contaminated sediment is difficult. A reactive core mat (RCM) was designed to accurately place a 1.25 cm thick sorbent (coke) layer in an engineered sediment cap. In April 2004, twelve 3.1 m × 31 m sections of RCM were placed in the Anacostia River, Washington, D.C., and overlain with a 15 cm layer of sand to secure it and provide a habitat for benthic organisms to colonize without compromising the integrity of the cap. Placement of the RCM did not cause significant sediment re-suspension or impact site hydrology. The RCM is an inexpensive and effective method to accurately deliver thin layers of difficult to place, high value, sorptive media into sediment caps. The approach can also be used to place granular reactive media that can degrade or mineralize contaminants.     

Assessment on Pollution by Heavy Metals and Arsenic Based on Surficial and Core Sediments in the Cam River Mouth,Haiphong Province,Vietnam

The Cam River mouth (Haiphong Province) is one of the main river mouths of the Red River System, which is one of the most important water resources in Northern Vietnam. Over the past 50 years, the strong socio-economic development in the area has caused a considerable contamination with heavy metals (Co, Cr, Cu, Mn, Ni, Pb, and Zn) and arsenic. In this study, the vertical and horizontal distributions of heavy metals and arsenic in sediments from the Cam River mouth were investigated. In addition, the history, origin, and degree of contamination were assessed. Normalized (with respect to Al) heavy metal and arsenic concentrations in sediment cores and absolute dates obtained from the ¹³⁷Cs analysis were used to reconstruct the pollution history of the river mouth. As, Cu, Mn, Pb, and Zn concentrations increase rapidly by approximately two times or more from 1954 to 1975, and then remain nearly unchanged from 1975 until 2008, whereas Co, Cr, and Ni concentrations slightly increase from 1954 until 2008. In addition, background values for heavy metals and arsenic have also been determined with regard to the period before 1954. In the study area, Co, Cr, Cu, Ni, Mn, and Zn are evaluated as minorly enriched, whereas As and Pb are classified as moderately enriched. Generally, the anthropogenic activities in the Haiphong harbor and industrial zone locally contribute to the contamination by heavy metals and arsenic in the Cam River mouth.     

Assessment of Trace Metals Contamination in the Suspended Matter and Sediments of a Semi-enclosed Mediterranean Gulf

This study investigates the distribution of heavy metals in the suspended particulate matter and the sediments of Kavala Gulf, located in Northern Greece. Particulate trace metals were determined in accordance to water column physicochemical parameters. Metals in sediments were related to the textural characteristics, the organic matter, and carbonate contents of surficial sediments. Results illustrated that the diverse human coastal activities influence the distribution of particulate and sediment metal concentrations, since lower trace metal levels were detected along the western (tourism) and eastern (aquaculture) coast, while increased values were observed at the central (urban and industrial). Overall, particulate metals show moderately low levels compared to other similar sites, with the exception of Ni and Cd depicting local peaks along the industrial coastal zone. Significantly increased levels for particulate lead (123.1 μg/g) and chromium (113.9 μg/g) were detected at the sites near the industrial zone. Direct effluents from a fertilizer plant appeared responsible for the increased Pb, Cr, and Cd levels, while the increased values in Zn, Cu, and Hg appear related to phosphogypsum leaching. Sediment contamination assessment indicated that the Kavala Gulf is characterized by clean to marginally polluted sediments, with moderately severe pollution levels along the urban coastline.     

Geochemical Speciation and Risk Assessment of Heavy Metals in Sediments of a River in Bangladesh

The surface sediment of a downstream river (Paira) connected to the marine ecosystems of the Bay of Bengal was assessed by sequential extraction technique. The objectives of this study were to evaluate the mobility and dynamics of heavy metals and their probable ecological risks. The results revealed high environmental risk of Cd due to higher availability in the exchangeable fraction (21%) and a considerable portion in the carbonate bound fraction due to the special affinity towards carbonate and co-precipitation with its minerals. Toxic metals like Cr, Ni, and Cd are of concern, and can occasionally be associated with adverse biological effects. The risk assessment code (RAC) suggests that the highest mobility of Cd poses a higher environmental risk and threat to the aquatic biota, as well.     

Assessment of Heavy Metal Contamination in the Sediments of the Shuangtaizi Estuary Using Multivariate Statistical Techniques

In order to assess heavy metal pollution of sediment samples collected from Shuangtaizi estuary, contamination factor (CF) and multivariate statistical analyses, including principal component analysis (PCA), cluster analysis (CA) and correlation analysis, are carried out in this paper. CF confirms that Pb, Cu and Hg concentrations are very low and all fall within the range of background, while Zn and Cd demonstrate moderate contamination (in A10, A13, A15, A16 and A17 sites) and very high contamination (in A10, A13, A15 and A17 sites), respectively. The PCA indicates that four significant principal components (PCs) are extracted, explaining 88.959% of total variance, which suggests that Pb, Cu and Zn are mainly associated with organic carbon (OC). The result from CA is consistent with that obtained from PCA, classifying that the heavy metals in two clusters derive from different sources. Correlation analysis supports the conclusions from PCA and CA, elucidating the relationships between heavy metals and particle sizes of the sediments.     

Historical Assessment of the Impacts of Chemical Contaminants in Sediments on Benthic Invertebrates in the Tidal Passaic River,New Jersey

A historical impact assessment was conducted for chemical contaminants in sediments of the tidal Passaic River in northern New Jersey. The assessment was based on sediment cores collected from 1990 to 1995. Each sediment core was segregated into fractions and the fractions dated using radioisotope analysis. Chemical concentrations, including a variety of metals and organic compounds, were estimated by decade for most of the 20th century in five reaches of the River. The chemical data for each decade were compared to available benchmark sediment quality values that represent levels of chemicals that may be toxic to benthic invertebrates in estuarine systems. Benchmark exceedances in the River were then calculated and characterized spatially and temporally using quantitative Geographic Information System (GIS) analyses, and the area of “impacted” sediments was calculated for each chemical and decade. Results of this assessment suggest that the ability of Passaic River sediments to support “normal” benthic invertebrate populations was limited by sediment contaminants throughout the 20^th century. Conditions have improved somewhat since the 1950s, although impacts to benthic populations remain from several metals and organic compounds despite some overall improvements in sediment quality in recent years.     

基于活性氧自由基水平评价蔬菜重金属污染

蔬菜细胞中活性氧自由基水平处于一定范围内,而蔬菜一旦受重金属污染,活性氧自由基水平将发生改变.本文采用2＇,7＇-二氯荧光黄双乙酸酯标记蔬菜叶片细胞内活性氧自由基,激光扫描共聚焦显微镜技术分析蔬菜受重金属污染后活性氧自由基荧光强度的变化.结果表明,不同浓度镉、铅、汞离子（0、25、50、100 mg/L）作用芹菜、菠菜和油菜后,蔬菜叶片中活性氧自由基荧光强度均呈上升趋势,基于活性氧自由基水平的升高可判断蔬菜是否受重金属污染.本研究建立了基于活性氧自由基水平的蔬菜重金属污染评价方法,进一步为蔬菜的监管提供方法学和技术理论基础.     

Seasonal change in the redox property of peat and its relation to vegetation in a system of floating mat and pond

A relationship was sought between species distribution and seasonal change in the redox property of peat in a floating mat in Mizorogaike Pond, central Japan. The mat surface experienced an annual submergence-emergence cycle due to its sinking-rising movement. Redox potential (Eh) of the surface peat showed little difference between communities in the mat in the submergence season (January–June) and early emergence season (July–August). However variation in Eh among communities was clear in the late emergence season (September–December). Among seven communities in the floating mat, theMenyanthes trifoliata-Rhynchospora fauriei, M. trifoliata-Eriocaulon sikokianum-E. bondoense f.pilosum, Sphagnum cuspidatum andM. trifoliata-Carex thunbergii communities had high Eh (400–600 mV) in the late emergence season, while theMenyanthes trifoliata andPhragmites australis-M. trifoliata communities had lower Eh (200–400 mV). TheM. trifoliata-Isachné globosa community was intermediate (300–500 mV). The earlier the emergence of the peat surface began, the higher the Eh became in the late emergence season.     

Assessment of Probable Causes of Reduced Aquatic Life in the Touchet River,Washington, USA

The Touchet River in eastern Washington State is the site of the first causal assessment in the arid Northwest for salmonids using the U.S. Environmental Protection Agency's (USEPA's) Stressor Identification process. Seven candidate causes that affect salmonid density and macroinvertebrate abundance and diversity were considered: toxics, warm water temperature, sedimentation, low dissolved oxygen, alkaline pH, reduced detritus, and reduced habitat complexity. Candidate causes were evaluated using several types of evidence of preceding causation, co-occurrence, sufficiency, and alteration along with evaluation of the consistency of that evidence and consistency with other assessments. Evidence was scored, and the body of evidence was weighed based on credibility, strength, diversity, and coherence. Warm water temperature and sedimentation were highly probable causes of altered biological condition. Low dissolved oxygen and alkaline pH were also a problem for some areas but were less severe than temperature and sediment. Water removal and reduced habitat complexity and canopy cover were not directly causal but could affect sedimentation and temperature. This case study is noteworthy for using assemblage symptomology associated with temperature, sediment, and detritus as a type of evidence and for physiographically matching reference sites for comparisons and evaluation of natural and cumulative anthropogenic stressor gradients in the absence of state biological criteria.     

The need and means to characterize sediment structure and behaviour prior to the selection and implementation of remediation plans

Remediation of contaminated sediments requires detailed characterizations of the speciation of the toxic substances and their transformations with regard to time and spatial distribution. While many approaches exist to address dissolved species of toxicants, there is a need to characterize sediments per se in terms of materials or particles which bind toxicants and modulate their bioavailability and rate of burial. Such specific information can be achieved through the correlative use of analytical microscopies, applied directly to native aquatic materials and used in conjunction with novel particle isolation methods and standard techniques of analytical chemistry. Such sedimentary `materials' are dominated by clays and other colloidal minerals, microorganisms, humic substances, organic debris, iron and manganese oxide coatings and extracellular polymeric substances. By using new technology to (1) identify particles and their relative abundances, (2) examine specific toxicant/particle associations at the scale of individual abundant particles, and (3) follow transformations over time, we produce information more insightful than was obtainable previously. Such knowledge will assist in determining which remediation technologies would be best for a given contaminated sediment (i.e. `intrinsic remediation' or dredging/disposal).     

我国主要河口沉积物中多环芳烃细菌降解及生物修复强化方式的研究进展

河口是海洋及陆地交互作用的集中地带,其生态环境的健康状况对所在地区人类居住及社会经济的可持续发展十分重要。近年来,河口城市的快速发展导致了大量的多环芳烃(polycyclic aromatic hydrocarbons,PAHs)在河口沉积物中积累,持久地影响水生生态系统的健康,其降解与转化逐渐成为近年来的研究热点。本文总结发现,我国主要河口(珠江口、长江口、辽河口、海河口)沉积物中的PAHs降解菌主要分布于假单胞菌门、放线菌门及芽孢杆菌门,其中克雷伯氏菌属、芽孢杆菌属及假单胞菌属报道较多。在河口沉积物中,PAHs的细菌降解主要是通过低效率的厌氧降解途径。低氧、高盐度是PAHs细菌降解的不利条件,温度与pH值的变化也为实地生物修复的应用效率带来了不确定性。表面活性剂、营养物与外源电子受体的添加以及共代谢作用均可促进沉积物细菌对PAHs的降解。目前多数研究以实验室规模开展,而河口沉积物生境复杂,建议未来针对河口沉积物的环境特点进行PAHs降解功能菌株种质资源的挖掘,并根据实际情况灵活制定强化策略。本综述为进一步从我国主要河口沉积物中筛选PAHs高效降解菌及其利用提供了思路与参考。     

Assessment of Anthropogenic Influence on Heavy Metals Contamination in the Aquatic Ecosystem Components: Water,Sediment, and Fish

Heavy metals (Pb, Cd, Ni, Cr, Cu, Zn, Mn, and As) concentration was investigated in the industrial effluents, water, sediment, and fish samples collected around the Dhaka Export Processing Zone, Savar, Bangladesh, to evaluate the level of contamination. The metals concentration in the industrial effluents of DEPZ and in the water samples of Dhalaibeel (lowland cum lake) and Bangshi River were significantly higher compared to the guideline values for industrial effluents and for drinking water (WHO and USEPA), respectively. The sedimentary metal concentrations were found to be lower than the respective probable effect concentrations (PECs) following the sediment quality guidelines. Furthermore, in comparison with the fish standards, the studied fish species were not found to be contaminated by heavy metals. Principal component analysis and cluster analysis demonstrated that the wastewater from the numerous industries and the domestic sewages around the DEPZ might have a possible impact on heavy metals contamination in the study area. The Pearson correlation analysis showed significant correlations (p < 0.01 and p < 0.05) between most of the metals in the samples of effluents, water, sediments, and fish muscles. The percentage enrichment factor (EF%) and geo-accumulation index () were followed to evaluate metal contamination in the sediment samples. Dhalaibeel sediment was maximally enriched for Cr (53.55%) and Bangshi River sediment for Zn (54.37%). The geo-accumulation index values for the sediment samples were less than zero, indicating that the sediment samples were free from contamination. This study could be used as a model study to assess the impact of anthropogenic activities on heavy metals contamination in aquatic ecosystems.     

An Integrated Case Study for Evaluating the Impacts of an Oil Refinery Effluent on Aquatic Biota in the Delaware River: Sediment Core Studies

The objectives of this study were to (1) determine if historical exceedences of oil and grease concentrations above the limits allowed in the National Pollution Elimination Discharge System permit for the wastewater treatment facility of Motiva Enterprises LLC Refinery, Delaware City, Delaware, could be determined from the sedimentary records of the Delaware River and, if so, (2) were the concentrations of contaminants high enough to be toxic to aquatic biota. Eighty-four surficial sediment samples, both within and outside the influence of the Refinery's discharge plume, were initially evaluated for their appropriateness for coring. Seven stations were ultimately selected for the historical core studies. Based on sediment type, radionuclide (Pb-210, Cs-137 and Be-7) geochronologies, and proximity of the cores to the Refinery, two cores were selected for more detailed polycyclic aromatic hydrocarbon (PAH) analyses. The rapid accumulation area of one core (located in the near-field of the discharge plume) had maximum total PAH (TPAH) concentration peaks at depths of 4 cm (1997; 3100 ng/g dw) and at 8.5–9 cm (1993; 3200 ng/g dw); the second core (located on the far-field periphery of the plume) had a maximum TPAH peak at 6.5 cm (1997; 3200 ng/g dw). In all cases, the maximum TPAH concentrations were below NOAA's Effects Range-Low concentration of 4022 ng/g dw for sediment biota toxicity. A chemical fingerprinting analysis of the PAHs in the two cores showed, however, that the PAHs present in the cores were predominantly pyrogenic PAHs consistent with Delaware River background PAHs. The core results are consistent with historic sediment PAH inputs in an industrial river system. PAH from the Refinery, if present, exist as a non-detectable increment to a high PAH baseline from many sources.     

Toxicity of Santander Bay Sediments to the Euryhaline Freshwater Oligochaete Limnodrilus hoffmeisteri

The freshwater euryhaline oligochaete Limnodrilus hoffmeisteri was selected for use in bioassays with polluted sediment from Santander Bay. It is easy to culture; is tolerant of low to moderate, up to 15‰, salinity; and is common in oligohaline conditions in European and North American estuaries. Worms were collected from an estuarine population and kept in unpolluted sediment for between 2 and 4 weeks, under laboratory conditions, at 7–8.5‰ salinity and 22.5 °C. Sediment from different sites in Santander Bay were sieved through 250 μm mesh and adjusted to a salinity of approx. 7‰ prior to the bioassays, either by adding sea water or dechlorinated tap water to the overlying water. High levels of ammonia in some sediment, which may confound results in ecotoxicity bioassays, were reduced by oxidation of the sediments in shallow trays. Sediment bioassays were performed with sexually mature Limnodrilus hoffmeisteri worms in 250-ml beakers, with a 1:3 ratio of sediment:water and 4 worms per baker. Endpoints in the 14-day bioassay were % mortality, adult final biomass, % adults that have shown resorption of the clitellum, number of cocoons, and burrowing behaviour. It was possible to rank the sites according to their toxicity using both mortality rates and sublethal effects. The control site had the following values for the endpoints: 5% mortality, ( ) 2.40 ± 1.52 cocoons per beaker and 1.271 ± 0.470 mg dw adult final biomass. The most toxic sediment resulted in 65% mortality, resorption of the clitellum in 67% of the adults, no production of cocoons and a low final biomass ( =0.681 ± 0.489 mg dw per adult). A second site had high mortality (60%) and no reproduction, although resorption of the clitellum did not occur in surviving animals. The remaining sites showed similar mortality (35–42%), and at only one of them was low reproduction observed (0.8 ± 0.447 cocoons per beaker). Behavioural effects, measured as length of galleries in a fixed area of the test-vessel at the end of the bioassay, were significant compared with control at only one site. Multivariate analysis showed the mortality gradient to be the strongest, with a second unassociated gradient representing clitellum resorption. The mortality gradient was associated with Cu and Zn concentration, and PAH and Pb possibly with resorption.     

A Weight of Evidence Approach to the Aquatic Hazard Assessment of Bisphenoi A

Bisphenol A (BPA; 4,4-isopropylidene diphenol) is a chemical intermediate used primarily in the production of epoxy resins and polycarbonate products. BPA has been identified in surface waters and, hence, has been the subject of considerable research into its potential effects on aquatic organisms. Available literature on the aquatic toxicity of BPA was reviewed for quality against European Union TGD and Organization of Economic Cooperation and Development GLP principles. From this review, studies of suitable quality covering numerous ecologically relevant endpoints were identified to evaluate the survival, growth, and reproductive success of aquatic organisms exposed to BPA. Those studies yielded approximately 70 no observed effect concentrations (ranging from 16 to 3640 μg/L) and lowest observed effect concentrations (160 to 11,000 μg/L) that were considered in this weight of evidence assessment. Across all data, adverse effects on survival, growth, and reproduction occurred only at concentrations of 160 μg/L and above. Secondary biochemical (e.g., vitellogenin induction) and morphological (e.g., gonad histology) data provide insight into mechanisms of action, but do not correlate with apical endpoints related to survival, growth, and reproduction. Comparing the weight of the evidence of the aquatic toxicity data that showed chronic effects at 160 μg/L and higher with typical surface water concentrations in the range of 0.001 to 0.10 μg/ L, BPA is unlikely to cause adverse effects on aquatic populations or ecosystems.     

Integrating Comparative Risk Assessment with Multi-Criteria Decision Analysis to Manage Contaminated Sediments: An Example for the New York/New Jersey Harbor

Current environmental challenges involve complex assessment and analysis of tradeoffs among differing criteria, expectations, and levels of certainty. Using multi-criteria decision analysis in combination with comparative risk assessment, a systematic and transparent framework can be created to integrate different types and sources of decision-relevant information. Although examples of decision analysis abound in the literature and academic efforts, its use within the practice of risk assessment and environmental management is still being established. This article provides an example of the use of decision analysis study that builds on a previous screening-level, comparative risk assessment of contaminated sediment from the New York/New Jersey harbor area. Using multi-criteria decision analysis, we explored the effect of different criteria weights, utility functions, and cost estimates on the ranking of seven contaminated sediment management alternatives. Values used in weighting decision criteria were surveyed from two interaction sessions with sediment management professionals.