The contractile proteins of smooth muscle. Properties and components of a Ca2+-sensitive actomyosin from chicken gizzard.

The preparation and characterization of a Ca²⁺-sensitive actomyosin from chicken gizzard is described. The pH curve of the Mg²⁺ ATPase activity of the actomyosin was dominated by the activity of the myosin component, and this gave rise to the acid and alkaline optima. Skeletal muscle myosin showed a similar curve. Both the activation of myosin ATPase by actin, and the Ca²⁺ sensitivity were confined to the neutral pH region. The subunit composition of the Ca²⁺-sensitive actomyosin was interesting in that no components corresponding to skeletal muscle troponin were obvious. It is suggested that the activity of gizzard actomyosin is regulated by a protein on the thin filaments with a subunit weight of ~130,000.     

Actin depolymerization drives actomyosin ring contraction during budding yeast cytokinesis

Actin filaments and myosin II are evolutionarily conserved force-generating components of the contractile ring during cytokinesis. Here we show that in budding yeast, actin filament depolymerization plays a major role in actomyosin ring constriction. Cofilin mutation or chemically stabilizing actin filaments attenuate actomyosin ring constriction. Deletion of myosin II motor domain or the myosin regulatory light chain reduced the contraction rate and also the rate of actin depolymerization in the ring. We constructed a quantitative microscopic model of actomyosin ring constriction via filament sliding driven by both actin depolymerization and myosin II motor activity. Model simulations based on experimental measurements support the notion that actin depolymerization is the predominant mechanism for ring constriction. The model predicts invariability of total contraction time regardless of the initial ring size, as originally reported for C. elegans embryonic cells. This prediction was validated in yeast cells of different sizes due to different ploidies.     

Cooperative interactions between calcium-binding sites on glycerinated muscle fibers the influence of cross-bridge attachment

A double isotope technique and EGTA buffers were used to measure the binding of Ca²⁺ to rabbit psoas muscle fibers extracted with detergent and glycerol. These experiments were designed to test the effect of rigor complex formation, determined by the degree of filament overlap, on the properties of the Ca²⁺-binding sites in the intact filament lattice. In the presence of 5 mM MgCl₂ (no ATP), reduction of filament overlap was associated with a reduced binding of Ca²⁺ over the entire range of free Ca²⁺ concentrations (5 · 10^?8 – 2 · 10^?5 M). With maximum filament overlap (sarcomere length 2.1–2.2 μm) the maximum bound Ca²⁺ was equivalent to 4 mol Ca²⁺/mol troponin and there was significant positive interaction between binding sites, as shown by Scatchard and Hill plots. With no filament overlap (sarcomere length 3.8–4.4 μm) the maximum bound Ca²⁺ was equivalent to 3 μmol Ca²⁺/mol troponin and graphical analysis indicated a single class of non-interacting sites. The data provide evidence that when cross-bridge attachments between actin and myosin filaments are formed not only does an additional Ca²⁺ binding site appear, but cooperative properties are imposed upon the binding sites.     

Purification of cytoplasmic actin by affinity chromatography using the C-terminal half of gelsolin

A new rapid method of the cytoplasmic actin purification, not requiring the use of denaturants or high concentrations of salt, was developed, based on the affinity chromatography using the C-terminal half of gelsolin (G4-6), an actin filament severing and capping protein. When G4-6 expressed in Escherichia coli was added to the lysate of HeLa cells or insect cells infected with a baculovirus encoding the beta-actin gene, in the presence of Ca²⁺ and incubated overnight at 4 °C, actin and G4-6 were both detected in the supernatant. Following the addition of Ni-Sepharose beads to the mixture, only actin was eluted from the Ni-NTA column by a Ca²⁺-chelating solution. The functionality of the cytoplasmic actins thus purified was confirmed by measuring the rate of actin polymerization, the gliding velocity of actin filaments in an in vitro motility assay on myosin V-HMM, and the ability to activate the ATPase activity of myosin V-S1.     

Actin filament dynamics in the actomyosin VI complex is regulated allosterically by calcium-calmodulin light chain

The contractile and enzymatic activities of myosin VI are regulated by calcium binding to associated calmodulin (CaM) light chains. We have used transient phosphorescence anisotropy to monitor the microsecond rotational dynamics of erythrosin-iodoacetamide-labeled actin with strongly bound myosin VI (MVI) and to evaluate the effect of MVI-bound CaM light chain on actin filament dynamics. MVI binding lowers the amplitude but accelerates actin filament microsecond dynamics in a Ca²⁺- and CaM-dependent manner, as indicated from an increase in the final anisotropy and a decrease in the correlation time of transient phosphorescence anisotropy decays. MVI with bound apo-CaM or Ca²⁺-CaM weakly affects actin filament microsecond dynamics, relative to other myosins (e.g., muscle myosin II and myosin Va). CaM dissociation from bound MVI damps filament rotational dynamics (i.e., increases the torsional rigidity), such that the perturbation is comparable to that induced by other characterized myosins. Analysis of individual actin filament shape fluctuations imaged by fluorescence microscopy reveals a correlated effect on filament bending mechanics. These data support a model in which Ca²⁺-dependent CaM binding to the IQ domain of MVI is linked to an allosteric reorganization of the actin binding site(s), which alters the structural dynamics and the mechanical rigidity of actin filaments. Such modulation of filament dynamics may contribute to the Ca²⁺- and CaM-dependent regulation of myosin VI motility and ATP utilization.     

Biochemical and structural studies of actomyosin-like proteins from non-muscle cells. Isolation and characterization of myosin from amoebae of Dictyostelium discoideum

A myosin-like protein was purified from amoebae of the cellular slime mold Dictyostelium discoideum. The purification utilized newly discovered solubility properties of actomyosin in sucrose. The amoebae were extracted with a 30% sucrose solution containing 0.1 m-KCl, and actomyosin was selectively precipitated from this crude extract by removal of the sucrose. The myosin and actin were then solubilized in a buffer containing KI and separated by gel filtration.The purified Dictyostelium myosin bears a very close resemblance to muscle myosin. The amoeba protein contains two heavy chains, about 210,000 molecular weight each, and two classes of light chains, 16,000 and 18,000 molecular weight. Dictyostelium myosin is insoluble at low ionic strength and forms bipolar thick filaments. The myosin possesses ATPase activity that is activated by Ca²⁺ but not EDTA, and is inhibited by Mg²⁺; under optimal conditions the specific activity of the enzyme is 0.09 μmol P₁/min per mg myosin.Dictyostelium myosin interacts with Dictyostelium actin or muscle actin, as shown by electron microscopy and by measurements of enzymatic activity. The ATPase activity of Dictyostelium myosin, in the presence of Mg²⁺ at low ionic strength, exhibits an average ninefold activation when actin is added.     

Interaction of the C2 Ig-like Domain of Cardiac Myosin Binding Protein-C with F-actin

Cardiac muscle contraction depends on interactions between thick (myosin) and thin (actin) filaments (TFs). TFs are regulated by intracellular Ca²⁺ levels. Under activating conditions Ca²⁺ binds to the troponin complex and displaces tropomyosin from myosin binding sites on the TF surface to allow actomyosin interactions. Recent studies have shown that in addition to Ca²⁺, the first four N-terminal domains (NTDs) of cardiac myosin binding protein C (cMyBP-C) (e.g. C0, C1, M and C2), are potent modulators of the TF activity, but the mechanism of their collective action is poorly understood. Previously, we showed that C1 activates the TF at low Ca²⁺ and C0 stabilizes binding of C1 to the TF, but the ability of C2 to bind and/or affect the TF remains unknown. Here we obtained 7.5 Å resolution cryo-EM reconstruction of C2-decorated actin filaments to demonstrate that C2 binds to actin in a single structural mode that does not activate the TF unlike the polymorphic binding of C0 and C1 to actin. Comparison of amino acid sequences of C2 with either C0 or C1 shows low levels of identity between the residues involved in interactions with the TF but high levels of conservation for residues involved in Ig fold stabilization. This provides a structural basis for strikingly different interactions of structurally homologous C0, C1 and C2 with the TF. Our detailed analysis of the interaction of C2 with the actin filament provides crucial information required to model the collective action of cMyBP-C NTDs on the cardiac TF.     

Inorganic polyphosphate hydrolysis catalyzed by skeletal muscular actomyosin complexes is uncoupled with motility

Hydrolysis of the triphosphate moiety of ATP, catalyzed by myosin, induces alterations in the affinity of the myosin heads for actin filaments via conformational changes, thereby causing motility of the actomyosin complexes. To elucidate the contribution of the triphosphate group attached to adenosine, we examined the enzymatic activity of heavy meromyosin (HMM) with actin filaments for inorganic tripolyphosphate (3PP) using a Malachite green method and evaluated using fluorescence microscopy the effects of 3PP on actin filament motility on HMM-coated glass slides. In the presence of MgCl₂, HMM hydrolyzed 3PP at a maximum rate of 0.016 s⁻¹ HMM⁻¹, which was four times lower than the hydrolysis rate of ATP. Tetrapolyphosphate (4PP) was hydrolyzed at a rate similar to that of 3PP hydrolysis. The hydrolysis rates of 3PP and 4PP were enhanced by roughly 10-fold in the presence of actin filaments. In motility assays, the presence of polyphosphates did not lead to the sliding movement of actin filaments. Moreover, in the presence of ATP at low concentrations, the sliding velocity of actin filaments decreased as the concentration of added polyphosphate increased, indicating a competitive binding of polyphosphate to myosin heads with ATP. These results suggested that the energy produced by standalone triphosphate hydrolysis did not induce the unidirectional motion of actomyosin and that the link between triphosphate and adenosine was crucial for motility.     

Study of reciprocal effects of cardiac myosin and tropomyosin isoforms on actin-myosin interaction with in vitro motility assay

Interaction of myosin with actin in striated muscle is controlled by Ca²⁺ via thin filament associated proteins: troponin and tropomyosin. In cardiac muscle there is a whole pattern of myosin and tropomyosin isoforms. The aim of the current work is to study regulatory effect of tropomyosin on sliding velocity of actin filaments in the in vitro motility assay over cardiac isomyosins. It was found that tropomyosins of different content of α- and β-chains being added to actin filament effects the sliding velocity of filaments in different ways. On the other hand the velocity of filaments with the same tropomyosins depends on both heavy and light chains isoforms of cardiac myosin.     

Regulatory light chains modulate in vitro actin motility driven by skeletal heavy meromyosin

Phosphorylation and Ca²⁺-Mg²⁺ exchange on the regulatory light chains (RLCs) of skeletal myosin modulate muscle contraction. However, the relation between the mechanisms for the effects of phosphorylation and metal ion exchange are not clear. We propose that modulation of skeletal muscle contraction by phosphorylation of the myosin regulatory light chains (RLCs) is mediated by altered electrostatic interactions between myosin heads/necks and the negatively charged thick filament backbone. Our study, using the in vitro motility assay, showed actin motility on hydrophilic negatively charged surfaces only over the HMM with phosphorylated RLCs both in the presence and absence of Ca²⁺. In contrast, good actin motility was observed on silanized surfaces (low charge density), independent of RLC phosphorylation status but with markedly lower velocity in the presence of Ca²⁺. The data suggest that Ca²⁺-binding to, and phosphorylation of, the RLCs affect the actomyosin interaction by independent molecular mechanisms. The phosphorylation effects depend on hydrophobicity and charge density of the underlying surface. Such findings might be exploited for control of actomyosin based transportation of cargoes in lab-on-a chip applications, e.g. local and temporary stopping of actin sliding on hydrophilic areas along a nanosized track.     

Force generated by actomyosin contraction builds bridges between adhesive contacts

Extracellular matrices in vivo are heterogeneous structures containing gaps that cells bridge with an actomyosin network. To understand the basis of bridging, we plated cells on surfaces patterned with fibronectin (FN)‐coated stripes separated by non‐adhesive regions. Bridges developed large tensions where concave cell edges were anchored to FN by adhesion sites. Actomyosin complexes assembled near those sites (both actin and myosin filaments) and moved towards the centre of the non‐adhesive regions in a treadmilling network. Inhibition of myosin‐II (MII) or Rho‐kinase collapsed bridges, whereas extension continued over adhesive areas. Inhibition of actin polymerization (latrunculin‐A, jasplakinolide) also collapsed the actomyosin network. We suggest that MII has distinct functions at different bridge regions: (1) at the concave edges of bridges, MIIA force stimulates actin filament assembly at adhesions and (2) in the body of bridges, myosin cross‐links actin filaments and stimulates actomyosin network healing when breaks occur. Both activities ensure turnover of actin networks needed to maintain stable bridges from one adhesive region to another.     

Inhibitory ca2+-control of movement of beads coated withphysarum myosin along actin-cables inChara internodal cells

Summary The actin-activated ATPase activityPhysarum myosin was shown to be inhibited of M levels of Ca²⁺. To determine if Ca²⁺ regulates ATP-dependent movement ofPhysarum myosin on actin, latex beads coated withPhysarum myosin were introduced intoChara cells by intracellular perfusion. In perfusion solution containing EGTA, the beads moved along the parallel arrays ofChara actin filaments at a rate of 1.0–1.8 m/sec; however, in perfusion solution containing Ca²⁺, the rate reduced to 0.0–0.7 m/sec. The movement of beads coated with scallop myosin, whose actin-activated ATPase activity is activated by Ca²⁺, was observed only in the perfusion solution containing Ca²⁺, indicating that myosin is responsible for the inhibitory effect of Ca²⁺ onPhysarum myosin movement. The involvement of this myosin-linked regulation in the inhibitory effect of Ca²⁺ on the cytoplasmic streaming observed inChara internodal cell andPhysarum plasmodium was discussed.Abbreviations ATP adenosine 5-triphosphate - DTT dithiothreitol - EDTA ethylenediaminetetraacetic acid - EGTA ethyleneglycolbis(-aminoethylether) N,N,N,N-tetraacetic acid - PIPES piperazine-N,N-bis(2-ethanesulfonic acid)     

Effects of the cardiomyopathy-causing E244D mutation of troponin T on the structures of cardiac thin filaments studied by small-angle X-ray scattering

Small-angle X-ray scattering experiments were carried out to investigate the structural changes of cardiac thin filaments induced by the cardiomyopathy-causing E244D mutation in troponin T (TnT). We examined native thin filaments (NTF) from a bovine heart, reconstituted thin filaments containing human cardiac wild-type Tn (WTF), and filaments containing the E244D mutant of Tn (DTF), in the absence and presence of Ca²⁺. Analysis by model calculation showed that upon Ca²⁺-activation, tropomyosin (Tm) and Tn in the WTF and NTF moved together in a direction to expose myosin-binding sites on actin. On the other hand, Tm and Tn of the DTF moved in the opposite directions to each other upon Ca²⁺-activation. These movements caused Tm to expose more myosin-binding sites on actin than the WTF, suggesting that the affinity of myosin for actin is higher for the DTF. Thus, the mutation-induced structural changes in thin filaments would increase the number of myosin molecules bound to actin compared with the WTF, resulting in the force enhancement observed for the E244D mutation.     

Actin and Myosin in pea tendrils

We demonstrate here the presence of actin and myosin in pea (Pisum sativum L.) tendrils. The molecular weight of tendril actin is 43,000, the same as rabbit skeletal muscle actin. The native molecular weight of tendril myosin is about 440,000. Tendril myosin is composed of two heavy chains of molecular weight approximately 165,000 and four (two pairs) light chains of 17,000 and 15,000. At high ionic strength, the ATPase activity of pea tendril myosin is activated by K⁺-EDTA and Ca²⁺ and is inhibited by Mg²⁺. At low ionic strength, the Mg²⁺-ATPase activity of pea tendril myosin is activated by rabbit skeletal muscle F-actin. Superprecipitation occurred after incubation at room temperature when ATP was added to the crude actomyosin extract. It is suggested that the interaction of actin and myosin may play a role in the coiling movement of pea tendril.     

Actin-facilitated assembly of smooth muscle myosin induces formation of actomyosin fibrils

To identify regulatory mechanisms potentially involved in formation of actomyosin structures in smooth muscle cells, the influence of F-actin on smooth muscle myosin assembly was examined. In physiologically relevant buffers, AMPPNP binding to myosin caused transition to the soluble 10S myosin conformation due to trapping of nucleotide at the active sites. The resulting 10S myosin-AMPPNP complex was highly stable and thick filament assembly was suppressed. However, upon addition to F-actin, myosin readily assembled to form thick filaments. Furthermore, myosin assembly caused rearrangement of actin filament networks into actomyosin fibers composed of coaligned F-actin and myosin thick filaments. Severin-induced fragmentation of actin in actomyosin fibers resulted in immediate disassembly of myosin thick filaments, demonstrating that actin filaments were indispensable for mediating myosin assembly in the presence of AMPPNP. Actomyosin fibers also formed after addition of F-actin to nonphosphorylated 10S myosin monomers containing the products of ATP hydrolysis trapped at the active site. The resulting fibers were rapidly disassembled after addition of millimolar MgATP and consequent transition of myosin to the soluble 10S state. However, reassembly of myosin filaments in the presence of MgATP and F-actin could be induced by phosphorylation of myosin P-light chains, causing regeneration of actomyosin fiber bundles. The results indicate that actomyosin fibers can be spontaneously formed by F-actin-mediated assembly of smooth muscle myosin. Moreover, induction of actomyosin fibers by myosin light chain phosphorylation in the presence of actin filament networks provides a plausible hypothesis for contractile fiber assembly in situ.     

Interactions of gelsolin and gelsolin-actin complexes with actin. Effects of calcium on actin nucleation, filament severing, and end blocking

Gelsolin is a calcium binding protein that shortens actin filaments. This effect occurs in the presence but not in the absence of micromolar calcium ion concentrations and is partially reversed following removal of calcium ions. Once two actin molecules have bound to gelsolin in solutions containing Ca2+, one of the actins remains bound following chelation of calcium, so that the reversal of gelsolin's effect cannot be accounted for simply by its dissociation from the ends of the shortened filaments to allow for elongation. In this paper, the interactions with actin of the ethylene glycol bis(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid (EGTA) stable 1:1 gelsolin-actin complexes are compared with those of free gelsolin. The abilities of free or complexed gelsolin to sever actin filaments, nucleate filament assembly, bind to the fast growing (+) filament ends, and lower the filament size distribution in the presence of either Ca2+ or EGTA were examined. The results show that both free gelsolin and gelsolin-actin complexes are highly dependent on Ca2+ concentration when present in a molar ratio to actin less than 1:50. The gelsolin-actin complexes, however, differ from free gelsolin in that they have a higher affinity for (+) filament ends in EGTA and they cannot sever filaments in calcium. The limited reversal of actin-gelsolin binding following removal of calcium and the calcium sensitivity of nucleation by complexes suggest an alternative to reannealing of shortened filaments that involves redistribution of actin monomers and may account for the calcium-sensitive functional reversibility of the solation of actin by gelsolin.     

Evidence for structural changes in vertebrate thick filaments induced by calcium

Paired sedimentation studies of isolated, native thick filaments at pH 6.8, I = 0.12 and in the presence of 0.3 mm-free Mg²⁺ show that the sedimentation coefficient increases with Ca²⁺ concentration (pCa² midpoint = 5.5), leveling off at pCa 4.7. The addition of ATP or ADP (5 mm) has no effect on the hydrodynamic changes induced by Ca²⁺. At much higher free Mg²⁺ concentrations (5 mm), the midpoint of the transition is shifted to pCa = 5.3. Viscosity measurements of the filament system under comparable conditions reveal a decrease in the relative viscosity over the same range of Ca²⁺ concentration. Synthetic filaments prepared from purified myosin free of C-protein also show the same behavior. Native filaments from which myosin heads have been removed by treatment with papain do not show Ca²⁺ dependence. The dependence of the sedimentation coefficient of filament on protein concentration, as measured by differential sedimentation, is unaffected by Ca²⁺, indicating that the changes in hydrodynamic properties are probably not related to aggregation of the filaments. The Ca²⁺ effects are reversible and are not observed on replacing Ca²⁺ by Mg²⁺. Binding studies carried out at low ionic strength reveal two binding sites for Ca²⁺ (K_a = 1.7 × 10⁵m^?1) per mole myosin within the filament and evidence is presented showing that the DTNB light chain is the site of binding. The combined results are interpreted as indicating that thick filaments of vertebrate muscle undergo conformational changes at physiological levels of Ca²⁺ and provide evidence for a Ca²⁺-sensitive regulatory mechanism at the level of the thick filament.     

Evidence for a role for cardiac myosin in regulating the contractile response.

Dinitrophenylated bovine cardiac myosin incorporates 1.3 mol of 1-fluoro-2,4-dinitro-benzene per 5 × 10⁵ g of protein. Concomitantly there was an activation of the Ca²⁺-ATPase activity and an inhibition of the K⁺(EDTA)-ATPase activity. The dinitrophenyl group is located in the smallest active proteolytic fragment, subfragment 1. Virtually all of the labeling occurs in the region containing the heavy chains of cardiac myosin as judged by dissociation experiments in sodium dodecyl sulfate. Dinitrophenylated myosin failed to form calcium-sensitive actomyosin when tested in an ATPase assay system containing actin, tropomyosin, troponin and ethylene glycol-bis(β-aminoethyl ether)N,N′-tetraacetic acid. Thiolysis of the dinitrophenyl group from myosin with 2-mercaptoethanol restored its ability to form a calcium-sensitive actomyosin. The Ca²⁺ and K⁺(EDTA)-ATPase activities were also restored to control values. These results indicate that cardiac myosin participates in the regulation of the interaction between the contractile proteins.     

Functional effects of substitutions I92T and V95A in actin-binding period 3 of tropomyosin

Tropomyosin polymerizes along actin filaments and together with troponin regulates muscle contraction in a Ca-dependent manner. Actin-binding periods are homologous residues, which repeat along tropomyosin sequence, form tropomyosin-actin interface and determine regulatory functions. To learn how period 3 is involved in tropomyosin functions we examined effects of two mutations in Tpm1.1, I92T and V95A, which have been linked to dilated and hypertrophic cardiomyopathies characterized respectively by hyper- and hypocontractile phenotypes. In this work the functional consequences of both mutations were studied in vitro by using actin thin filaments reconstituted in the presence of mutant Tpm1.1 homodimers carrying the substitutions in both tropomyosin chains, Tpm1.1 heterodimers with substitution only in one Tpm1.1 chain, and Tpm1.1/Tpm2.2 heterodimers with substitution in Tpm1.1 chain and wild type Tpm2.2 in the second chain. The presence of the substitution I92T decreased the tropomyosin affinity for actin, abolished Ca²⁺-dependent activation of the actomyosin ATPase, decreased the sensitivity of the tropomyosin-troponin complex to subsaturating Ca²⁺ concentrations and reduced the cooperativity of the myosin-induced transition of the thin filament to a fully active state. The substitution V95A had opposite effects: increased actin affinity, increased the actomyosin ATPase activity above the level observed for wild type Tpm and increased cooperativity of myosin-induced activation of the thin filaments reconstructed with homo- and heterodimers of tropomyosin. Substitutions I92T and V95A were dominant, but the formation of heterodimers modified the effects observed for homodimers.     

Role of actin C-terminus in regulation of striated muscle thin filament

In striated muscle, regulation of actin-myosin interactions depends on a series of conformational changes within the thin filament that result in a shifting of the tropomyosin-troponin complex between distinct locations on actin. The major factors activating the filament are Ca²⁺ and strongly bound myosin heads. Many lines of evidence also point to an active role of actin in the regulation. Involvement of the actin C-terminus in binding of tropomyosin-troponin in different activation states and the regulation of actin-myosin interactions were examined using actin modified by proteolytic removal of three C-terminal amino acids. Actin C-terminal modification has no effect on the binding of tropomyosin or tropomyosin-troponin + Ca²⁺, but it reduces tropomyosin-troponin affinity in the absence of Ca²⁺. In contrast, myosin S1 induces binding of tropomyosin to truncated actin more readily than to native actin. The rate of actin-activated myosin S1 ATPase activity is reduced by actin truncation both in the absence and presence of tropomyosin. The Ca²⁺-dependent regulation of the ATPase activity is preserved. Without Ca²⁺ the ATPase activity is fully inhibited, but in the presence of Ca²⁺ the activation does not reach the level observed for native actin. The results suggest that through long-range allosteric interactions the actin C-terminus participates in the thin filament regulation.