Membrane hydrocarbon thickness modulates the dynamics of a membrane transport protein

Nitroxide spin labels were incorporated into selected sites within the β-barrel of the bacterial outer-membrane transport protein BtuB by site-directed mutagenesis, followed by chemical modification with a methanethiosufonate spin label. The electron paramagnetic resonance lineshapes of the spin-labeled side chain (R1) from these sites are highly variable, and have spectral parameters that reflect secondary structure and local steric constraints. In addition, these lineshape parameters correlate with crystallographic structure factors for Cα carbons, suggesting that the motion of the spin label is modulated by both the local modes of motion of the spin label and the local dynamics of the protein backbone. Experiments performed as a function of lipid composition and sample temperature indicate that nitroxide spin labels on the exterior surface of BtuB, which face the membrane hydrocarbon, are not strongly influenced by the phase state of the bulk lipids. However, these spectra are modulated by membrane hydrocarbon thickness. Specifically, the values of the scaled mobility parameter for the R1 lineshapes are inversely proportional to the hydrocarbon thickness. These data suggest that protein dynamics and structure in BtuB are directly coupled to membrane hydrophobic thickness.     

Membrane thickness varies around the circumference of the transmembrane protein BtuB

BtuB is a large outer-membrane β-barrel protein that belongs to a class of active transport proteins that are TonB-dependent. These TonB-dependent transporters are based upon a 22-stranded antiparallel β-barrel, which is notably asymmetric in its length. Here, site-directed spin labeling and simulated annealing were used to locate the membrane lipid interface surrounding BtuB when reconstituted into phosphatidylcholine bilayers. Positions on the outer facing surface of the β-barrel and the periplasmic turns were spin-labeled and distances from the label to the membrane interface estimated by progressive power saturation of the electron paramagnetic resonance spectra. These distances were then used as atom-to-plane distance restraints in a simulated annealing routine, to dock the protein to two independent planes and produce a model representing the average position of the lipid phosphorus atoms at each interface. The model is in good agreement with the experimental data; however, BtuB is mismatched to the bilayer thickness and the resulting planes representing the bilayer interface are not parallel. In the model, the membrane thickness varies by 11 Å around the circumference of the protein, indicating that BtuB distorts the bilayer interface so that it is thinnest on the short side of the protein β-barrel.     

Analysis of the oligomeric structure of the motor protein prestin

Prestin, a member of the solute carrier family 26, is expressed in the basolateral membrane of outer hair cells. This protein provides the molecular basis for outer hair cell somatic electromotility, which is crucial for the frequency selectivity and sensitivity of mammalian hearing. It has long been known that there are abundantly expressed approximately 11-nM protein particles present in the basolateral membrane. These particles were hypothesized to be the motor proteins that drive electromotility. Because the calculated size of a prestin monomer is too small to form an approximately 11-nM particle, the possibility of prestin oligomerization was examined. We investigated possible quaternary structures of prestin by lithium dodecyl sulfate-PAGE, perfluoro-octanoate-PAGE, a membrane-based yeast two-hybrid system, and chemical cross-linking experiments. Prestin, obtained from different host or native cells, is resistant to dissociation by lithium dodecyl sulfate and behaves as a stable oligomer on lithium dodecyl sulfate-PAGE. In the membrane-based yeast two-hybrid system, homo-oligomeric interactions between prestin-bait/prestin-prey suggest that prestin molecules can associate with each other. Chemical cross-linking experiments, perfluoro-octanoate-PAGE/Western blot, and affinity purification experiments all indicate that prestin exists as a higher order oligomer, such as a tetramer, in prestin-expressing yeast, mammalian cell lines and native outer hair cells. Our data from experiments using hydrophobic and hydrophilic reducing reagents suggest that the prestin dimer is connected by a disulfide bond embedded in the prestin hydrophobic core. This stable dimer may act as the building block for producing the higher order oligomers that form the approximately 11-nM particles in the outer hair cell's basolateral membrane.     

Membrane protein synthesis in Escherichia coli: sensitivity to chloramphenicol

Analysis of the labeled proteins of Escherichia coli synthesized in the presence of chloramphenicol (30 or 100 μg/ml) showed: (A) no significant difference in the relative inhibitions of the envelope and cytoplasmic fractions but striking differences in the gel electrophoresis patterns of preparations from chloramphenicol-treated cells versus exponential phase cells; and (B) the average molecular weight of proteins labeled in chloramphenicol (100 μg/ml) was almost half the average of proteins from cells labeled in the absence of chloramphenicol, suggesting that they probably include some incomplete peptides. These results suggest that septation occurs in bacteria by assembly of preexisting envelope proteins in mutants that divide in the presence of high concentrations of chloramphenicol (100 μg/ml).     

Tension sensitivity of prestin: comparison with the membrane motor in outer hair cells

The membrane motor in outer hair cells undergoes conformational transitions involving charge displacement of approximately 0.8 e across the membrane and changes of approximately 4 nm(2) in its membrane area. Previous reports have established that the charge transfer in the membrane motor and that in prestin, a membrane protein in the plasma membrane of outer hair cells, are approximately equal. Here, we determine the membrane area changes based on its sensitivity to membrane tension. We found that prestin does undergo area changes and that the magnitude is approximately 1 nm(2), smaller than the value 4 nm(2) for outer hair cell motor. This result confirms that prestin is a protein that functions as a membrane motor based on piezoelectricity. The discrepancy in the magnitude could suggest a prestin-containing complex in outer hair cells.     

The motor protein prestin is a bullet-shaped molecule with inner cavities

Prestin is a transmembrane motor protein localized at the outer hair cells (OHCs) of the mammalian inner ear. Voltage-dependent conformational changes in prestin generate changes in the length of OHCs. A loss of prestin function is reported to induce severe auditory deficiencies, suggesting prestin-dependent changes of OHC length may be at least a part of cochlear amplification. Here we expressed the recombinant FLAG-fused prestin proteins in Sf9 cells and purified to particles of a uniform size in EM. The square-shaped top view of purified prestin, the binding of multiple anti-FLAG antibodies to each prestin particle, the native-PAGE analysis, and the much larger molecular weight obtained from size exclusion chromatography than the estimation for the monomer all support that prestin is a tetramer (Zheng, J., Du, G. G., Anderson, C. T., Keller, J. P., Orem, A., Dallos, P., and Cheatham, M. (2006) J. Biol. Chem. 281, 19916-19924). From negatively stained prestin particles, the three-dimensional structure was reconstructed at 2 nm resolution assuming 4-fold symmetry. Prestin is shown to be a bullet-shaped particle with a large cytoplasmic domain. The surface representation demonstrates indentations on the molecule, and the slice images indicate the inner cavities of sparse densities. The dimensions, 77 x 77 x 115 A, are consistent with the previously reported sizes of motor proteins on the surface of OHCs.     

Functional prediction: identification of protein orthologs and paralogs

Orthologs typically retain the same function in the course of evolution. Using beta-decarboxylating dehydrogenase family as a model, we demonstrate that orthologs can be confidently identified. The strategy is based on our recent findings that substitutions of only a few amino acid residues in these enzymes are sufficient to exchange substrate and coenzyme specificities. Hence, the few major specificity determinants can serve as reliable markers for determining orthologous or paralogous relationships. The power of this approach has been demonstrated by correcting similarity-based functional misassignment and discovering new genes and related pathways, and should be broadly applicable to other enzyme families.     

Dating the early evolution of plants: detection and molecular clock analyses of orthologs

Orthologs generally are under selective pressure against loss of function, while paralogs usually accumulate mutations and finally die or deviate in terms of function or regulation. Most ortholog detection methods contaminate the resulting datasets with a substantial amount of paralogs. Therefore we aimed to implement a straightforward method that allows the detection of ortholog clusters with a reduced amount of paralogs from completely sequenced genomes. The described cross-species expansion of the reciprocal best BLAST hit method is a time-effective method for ortholog detection, which results in 68% truly orthologous clusters and the procedure specifically enriches single-copy orthologs. The detection of true orthologs can provide a phylogenetic toolkit to better understand evolutionary processes. In a study across six photosynthetic eukaryotes, nuclear genes of putative mitochondrial origin were shown to be over-represented among single copy orthologs. These orthologs are involved in fundamental biological processes like amino acid metabolism or translation. Molecular clock analyses based on this dataset yielded divergence time estimates for the red/green algae (1,142 MYA), green algae/land plant (725 MYA), mosses/seed plant (496 MYA), gymno-/angiosperm (385 MYA) and monocotyledons/core eudicotyledons (301 MYA) divergence times. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

N-terminal-mediated homomultimerization of prestin, the outer hair cell motor protein

The outer hair cell lateral membrane motor, prestin, drives the cell's mechanical response that underpins mammalian cochlear amplification. Little is known about the protein's structure-function relations. Here we provide evidence that prestin is a 10-transmembrane domain protein whose membrane topology differs from that of previous models. We also present evidence that both intracellular termini of prestin are required for normal voltage sensing, with short truncations of either terminal resulting in absent or modified activity despite quantitative findings of normal membrane targeting. Finally, we show with fluorescence resonance energy transfer that prestin-prestin interactions are dependent on an intact N-terminus, suggesting that this terminus is important for homo-oligomerization of prestin. These domains, which we have perturbed, likely contribute to allosteric modulation of prestin via interactions among prestin molecules or possibly between prestin and other proteins, as well.     

Genetics and the evolution of primate enamel thickness: a baboon model

The thickness of mammalian tooth enamel plays a prominent role in paleontology because it correlates with diet, and thicker enamel protects against tooth breakage and wear. Hominid evolutionary studies have stressed the importance of this character for over 30 years, from the identification of "Ramapithecus" as an early Miocene hominid, to the recent discovery that the earliest hominids display molar enamel intermediate in thickness between extant chimpanzees and Australopithecus. Enamel thickness remains largely unexplored for nonhominoid primate fossils, though there is significant variation across modern species. Despite the importance of enamel thickness variation to primate evolution, the mechanisms underlying variation in this trait have not yet been elucidated. We report here on the first quantitative genetic analysis of primate enamel thickness, an analysis based on 506 pedigreed baboons from a captive breeding colony. Computed tomography analysis of 44 Papio mandibular molars shows a zone of sufficiently uniform enamel thickness on the lateral surface of the protoconid. With this knowledge, we developed a caliper metric measurement protocol for use on baboon molars worn to within this zone, enabling the collection of a data set large enough for genetic analyses. Quantitative genetic analyses show that a significant portion of the phenotypic variance in enamel thickness is due to the additive effects of genes and is independent of sex and tooth size. Our models predict that enamel thickness could rapidly track dietary adaptive shifts through geological time, thus increasing the potential for homoplasy in this character. These results have implications for analyses of hominoid enamel thickness variation, and provide a foundation from which to explore the evolution of this phenotype in the papionin fossil record.     

Effect of membrane mechanics on charge transfer by the membrane protein prestin

Prestin was found in the membrane of outer hair cells (OHCs) located in the cochlea of the mammalian inner ear. These cells convert changes in the membrane potential into dimensional changes and (if constrained) to an active electromechanical force. The OHCs provide the ear with the mechanism of amplification and frequency selectivity that is effective up to tens of kHz. Prestin is a crucial part of the motor complex driving OHCs. Other cells transfected with prestin acquire electromechanical properties similar to those in the native cell. While the mechanism of prestin has yet to be fully understood, the charge transfer is its critical component. Here we investigate the effect of the mechanics of the surrounding membrane on electric charge transfer by prestin. We simulate changes in the membrane mechanics via the corresponding changes in the free energy of the prestin system. The free energy gradient enters a Fokker-Planck equation that describes charge transfer in our model. We analyze the effects of changes in the membrane tension and membrane elastic moduli. In the case of OHC, we simulate changes in the longitudinal and/or circumferential stiffness of the cell’s orthotropic composite membrane. In the case of cells transfected with prestin, we vary the membrane areal modulus. As a result, we show the effects of the membrane mechanics on the probabilistic characteristics of prestin-associated charge transfer for both stationary and high-frequency conditions. We compare our computational results with the available experimental data and find good agreement with the experiment.     

Rapid divergency of rodent CD99 orthologs: implications for the evolution of the pseudoautosomal region

The human pseudoautosomal region 1 (PAR1) is essential for the obligatory X-Y crossover in male meiosis. Despite its critical role, comparative studies of human and mouse pseudoautosomal genes have been limited owing to the scarcity of genes conserved between the two species. Human CD99 is a 32-kDa cell surface protein that is encoded by the MIC2 gene localized to the PAR1. Although several sequences such as CD99L2, PBDX, and CD99L1 are related to CD99, its murine ortholog, Cd99, has not yet been identified. Here we report a novel mouse Cd99, designated D4, which shows overall sequence homology to CD99, with the highest conservation between the two genes being found in the transmembrane regions. In addition, the D4 protein displays biochemical characteristics, functional homology, and expression patterns similar to those of CD99. The D4 gene is localized on an autosome, chromosome 4, reflecting a common mapping feature with other mouse orthologs of human PAR1 genes. Furthermore, a phylogenetic analysis of CD99-related genes confirmed that the D4 gene is indeed an ortholog of CD99 and exhibits the accelerated evolution pattern of CD99 orthologs, as compared to the CD99L2 orthologs. On the basis of these findings, we suggest that CD99 belongs to the ancient PAR genes, and that the rapid interspecies divergence of its present sequence and map position is due to a high recombination frequency and the occurrence of chromosomal translocation, supporting the addition-attrition hypothesis for PAR evolution.     

Metallothionein protein evolution: a miniassay

Metallothionein (MT) evolution is one of the most obscure yet fascinating aspects of the study of these atypical metal-binding peptides. The different members of the extremely heterogeneous MT protein superfamily probably evolved through a web of duplication, functional differentiation, and/or convergence events leading to the current scenario, which is particularly hard to interpret in terms of molecular evolution. Difficulties in drawing straight evolutionary relationships are reflected in the lack of definite MT classification criteria. Presently, MTs are categorized either according to a pure taxonomic clustering or depending on their metal binding preferences and specificities. Extremely well documented MT revisions were recently published. But beyond classic approaches, this review of MT protein evolution will bring together new aspects that have seldom been discussed before. Hence, the emergence of life on our planet, since metal ion utilization is accepted to be at the root of the emergence of living organisms, and global trends that underlie structural and functional MT diversification, will be presented. Major efforts are currently being devoted to identifying rules for function-constrained MT evolution that may be applied to different groups of organisms.     

Cochlear mechanics: no shout but a twist in the absence of prestin

Mammalian hearing is boosted by mechanically active auditory receptor cells, the outer hair cells which amplify the actions of incoming sounds. Recent evidence indicates that the molecular motor that drives this amplification, prestin, may do more than boogie.     

An anion antiporter model of prestin, the outer hair cell motor protein

Cochlear amplification in mammalian hearing relies on an active mechanical feedback process generated by outer hair cells, driven by a protein, prestin (SLC26A5), in the lateral membrane. We have used kinetic models to understand the mechanism by which prestin might function. We show that the two previous hypotheses of prestin, which assume prestin cannot operate as a transporter, are insufficient to explain previously published data. We propose an alternative model of prestin as an electrogenic anion exchanger, exchanging one Cl(-) ion for one divalent or two monovalent anions. This model can reproduce the key aspects of previous experimental observations. The experimentally observed charge movements are produced by the translocation of one Cl(-) ion combined with intrinsic positively charged residues, while the transport of the counteranion is electroneutral. We tested the model with measurements of the Cl(-) dependence of charge movement, using SO(4)(2-) to replace Cl(-). The data was compatible with the predictions of the model, suggesting that prestin does indeed function as a transporter.     

Patterns of structural dynamics in RACK1 protein retained throughout evolution: A hydrogen‐deuterium exchange study of three orthologs

RACK1 is a member of the WD repeat family of proteins and is involved in multiple fundamental cellular processes. An intriguing feature of RACK1 is its ability to interact with at least 80 different protein partners. Thus, the structural features enabling such interactomic flexibility are of great interest. Several previous studies of the crystal structures of RACK1 orthologs described its detailed architecture and confirmed predictions that RACK1 adopts a seven‐bladed β‐propeller fold. However, this did not explain its ability to bind to multiple partners. We performed hydrogen‐deuterium (H‐D) exchange mass spectrometry on three orthologs of RACK1 (human, yeast, and plant) to obtain insights into the dynamic properties of RACK1 in solution. All three variants retained similar patterns of deuterium uptake, with some pronounced differences that can be attributed to RACK1's divergent biological functions. In all cases, the most rigid structural elements were confined to B‐C turns and, to some extent, strands B and C, while the remaining regions retained much flexibility. We also compared the average rate constants for H‐D exchange in different regions of RACK1 and found that amide protons in some regions exchanged at least 1000‐fold faster than in others. We conclude that its evolutionarily retained structural architecture might have allowed RACK1 to accommodate multiple molecular partners. This was exemplified by our additional analysis of yeast RACK1 dimer, which showed stabilization, as well as destabilization, of several interface regions upon dimer formation.     

Molecular evolution of FLORICAULA/LEAFY orthologs in the Andropogoneae (Poaceae)

Members of the grass family (Poaceae) exhibit a broad range of inflorescence structures and other morphologies, making the grasses an interesting model system for studying the evolution of development. Here we present an analysis of the molecular evolution of FLORICAULA/LEAFY-like genes, which are important developmental regulatory loci known to affect inflorescence development in a wide range of flowering plant species. We have focused on sequences from the Andropogoneae, a tribe within the grass family that includes maize (Zea mays ssp. mays) and Sorghum (Sorghum bicolor). The FLORICAULA/LEAFY gene phylogeny we generated largely agrees with previously published phylogenies for the Andropogoneae using other nuclear genes but is unique in that it includes both members of one of the many duplicate gene sets present in maize. The placement of these sequences in the phylogeny suggests that the duplication of the maize FLORICAULA/LEAFY orthologs, zfl1 and zfl2, is a consequence of a proposed tetraploidy event that occurred in the common ancestor of Zea and a closely related genus, Tripsacum. Our data are consistent with the hypothesis that the transcribed regions of the FLORICAULA/LEAFY-like genes in the Andropogoneae are functionally constrained at both nonsynonymous and synonymous sites and show no evidence of directional selection. We also examined conservation of short noncoding sequences in the first intron, which may play a role in gene regulation. Finally, we investigated the genetic diversity of one of the two maize FLORICAULA/LEAFY orthologs, zfl2, in maize and its wild ancestor, teosinte (Z. mays ssp. parviglumis), and found no evidence for selection pressure resulting from maize domestication within the zfl2-coding region.     

To B or Not to B a flower: the role of DEFICIENS and GLOBOSA orthologs in the evolution of the angiosperms

DEFICIENS (DEF) and GLOBOSA (GLO) function in petal and stamen organ identity in Antirrhinum and are orthologs of APETALA3 and PISTILLATA in Arabidopsis. These genes are known as B-function genes for their role in the ABC genetic model of floral organ identity. Phylogenetic analyses show that DEF and GLO are closely related paralogs, having originated from a gene duplication event after the separation of the lineages leading to the extant gymnosperms and the extant angiosperms. Several additional gene duplications followed, providing multiple potential opportunities for functional divergence. In most angiosperms studied to date, genes in the DEF/GLO MADS-box subfamily are expressed in the petals and stamens during flower development. However, in some angiosperms, the expression of DEF and GLO orthologs are occasionally observed in the first and fourth whorls of flowers or in nonfloral organs, where their function is unknown. In this article we review what is known about function, phylogeny, and expression in the DEF/GLO subfamily to examine their evolution in the angiosperms. Our analyses demonstrate that although the primary role of the DEF/GLO subfamily appears to be in specifying the stamens and inner perianth, several examples of potential sub- and neofunctionalization are observed.