Amphiphilic poly(L-lactide)-b-dendritic poly(L-lysine)s synthesized with a metal-free catalyst and new dendron initiators: chemical preparation and characterization

This study presents investigations on new approaches to novel biodegradable amphiphilic poly(L-lactide)-b-dendritic poly(L-lysine)s bearing well-defined structures. First, two new Boc-protected poly(L-lysine) dendron initiators G(2)OH 4 (generation = 2) and G(3)OH 6 (generation = 3) with hydroxyl end functional groups were efficiently derived from corresponding precursors 3 and 5 via methyl ester substitution with ethanolamine. Subsequently, two series of new diblock copolymers of poly(L-lactide)-b-dendritic Boc-protected poly(L-lysine)s (S1-S2, S3-S4) were prepared in chloroform through ring-opening copolymerization of poly(L-lactide)s with a metal-free catalyst of organic 4-(dimethylamino) pyridine (DMAP) in the presence of a corresponding new poly(L-lysine) dendron initiator. Further, molecular structures of the prepared new dendron initiators as well as those of poly(L-lactide)-b-dendritic Boc-protected poly(L-lysine)s bearing different dendron blocks and PLLA lengths were examined by means of nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), mass spectrometry (ESI-MS, MALDI-FTMS), and thermal gravimetric analysis (TGA). The results demonstrated successful formation of the synthetic precursors, functional dendron initiators, and new diblock copolymers. In addition, the very narrow molecular weight distributions (PDI = 1.10-1.14) of these poly(L-lactide)-b-dendritic Boc-protected poly(L-lysine)s further indicated their well-defined molecular structures. After the efficient Boc-deprotection for the dendron amino groups with TFA/CH(2)Cl(2), new diblock poly(L-lactide)-b-dendritic poly(L-lysine)s bearing lipophilic PLLA and hydrophilic dendritic PLL were finally prepared. It was noteworthy that the MALDI-FTMS result showed that no appreciable intermolecular chain transesterification happened during the ROP of L-lactide catalyzed by the DMAP. Moreover, self-assembly of these new biodegradable amphiphilic copolymers in diverse solvents were also preliminarily studied.     

Polylactones 57. Biodegradable networks based on A-B-A triblock segments containing poly(ethylene glycol)s-syntheses and drug release properties

Condensation of Bu(2)Sn(OMe)(2) with poly(ethylene glycol)s yielded macrocyclic tin alkoxides which were, in turn, used as cyclic initiators for the ring-expansion polymerization of epsilon-caprolactone, D,L-lactide, or trimethylene carbonate. The resulting cyclic triblock copolymers were in situ cross-linked with trimesoyl chloride. The lengths of the A-B-A triblock segments were varied via the monomer-initiator ratio (M/I) or via the lengths of the poly(ethylene glycol)s. After extraction with CH(2)Cl(2), the isolated networks were characterized by (1)H NMR spectroscopy, DSC measurements, and swelling experiments. The release of dexamethasone and 5-fluorouracil from two triblock networks was studied in physiological buffer solutions at 37 degrees C over a period of several weeks. A strong initial burst was found in all cases. Only a weak initial burst and a more continuous release was observed when networks of random L-lactide/epsilon-caprolactone copolymers were studied under the same conditions.     

Branched poly(lactide) synthesized by enzymatic polymerization: effects of molecular branches and stereochemistry on enzymatic degradation and alkaline hydrolysis

In this article the effects of the number of molecular branches (chain ends) and the stereochemistry of poly(lactide)s (PLAs) on the enzymatic degradation and alkaline hydrolysis are studied. Various linear and branched PLAs were synthesized using lipase PS (Pseudomonas fluorescens)-catalyzed ring-opening polymerization (ROP) of lactide monomers having different stereochemistries (L-lactide, D-lactide, and D,L-lactide). Five different alcohols were used as initiators for the ROP, and the monomer-to-initiator molar feed ratio was varied from 10 to 100 and 1000 for each branch in the polymer architecture. The properties of branched PLAs that would affect the enzymatic and alkaline degradations, i.e., the glass transition temperature, the melting temperature, the melting enthalpy, and the advancing contact angle, were determined. The PLA films were degraded using proteinase K or 1.0 M NaOH solution, and the weight loss and changes in the number average molecular weight (Mn) of the polymer were studied during 12 h of degradation. The results suggest that an increase in the number of molecular branches of branched PLAs enhances its enzymatic degradability and alkali hydrolyzability. Moreover, the change in Mn of the branched poly(L-lactide) (PLLA) by alkaline hydrolysis indicated that the decrease in Mn was in the first place dependent on the number of molecular branches and thereafter on the length of the molecular branch of branched PLA. The branched PLLA, poly(D-lactide) (PDLA), and poly(D,L-lactide) (PDLLA) differed in weight loss and change in Mn of the PLA segment during the enzymatic degradation. It is suggested that the branched PDLLA was degraded preferentially by proteinase K.     

Polylactones. 59. Biodegradable networks via ring-expansion polymerization of lactones and lactides with a spirocyclic tin initiator

Spirocyclic tin initiators were prepared by condensation of commercial hydroxyethylated pentaerythritol with Bu(2)Sn(OMe)(2). These tin-containing spirocycles served as initiators for the ring-expansion polymerization of epsilon-caprolactone, beta-D,L-butyrolactone or D,L-lactide. The in situ polycondensation of these expanded spirocycles with terephthaloyl chloride or sebacoyl chloride yielded the desired biodegradable networks with elimination of the Bu(2)Sn group. The segment length (pore size) could be controlled via the monomer-initiator ratio (M/I) of the ring-expansion polymerization. Biodegradable networks were also obtained when Sn-containing spirocyclic polylactones were polycondensed with diphenyl dichlorosilane, benzene phosphonic dichloride, and phenyl phosphoric dichloride.     

Association of star-shaped poly(D,L-lactide)s containing nucleobase multiple hydrogen bonding

A new family of associating polymers based on four-arm, star-shaped poly(D,L-lactide) (PDLLA) containing peripheral complementary hydrogen-bonding sites is described. Hydroxy-terminated, four-arm, star-shaped PDLLAs of controlled molar mass were functionalized with complementary DNA base pairs, adenine (A) and thymine (T), to obtain PDLLA-A and PDLLA-T, respectively. 1H NMR spectroscopy confirmed quantitative functionalization and the subsequent formation of PDLLA-A and PDLLA-T hydrogen-bonded complexes. Job's analysis revealed a 1:1 optimal stoichiometry for the hydrogen-bonded complexes, and the association constant (Ka) that was determined using the 1H NMR-based Benesi-Hildebrand treatment was 84 M(-1) for the low molar mass complementary polymers. Furthermore, the PDLLA-based hydrogen-bonded complexes exhibited higher solution viscosities compared to the corresponding non-hydrogen-bonded precursors, which further confirmed strong complementary multiple-hydrogen-bonding associations between the star-shaped polymers with terminal adenine and thymine groups. Moreover, variable-temperature 1H NMR studies demonstrated the thermoreversibility of the hydrogen-bonded PDLLA-based complexes in solution.     

Interactions of Lycopodium alkaloids with acetylcholinesterase investigated by 1H NMR relaxation rate

In order to further understand the interaction processes between the Lycopodium alkaloids and acetylcholinesterase, the binding properties of N-acetyl huperzine A (1), huperzine B (2) and huperzine F (3) with Torpediniforms Nacline acetylcholinesterase (TnAchE) were investigated by 1H NMR methods. The nonselective, selective and double-selective spin-lattice relaxation rates were acquired in the absence and presence of TnAchE at a ratio of [ligand]/[protein]=1:0.005. The selective relaxation rates show protons of 1-3 have dipole-dipole interaction with protons of TnAchE at the binding interface. The molecular rotational correlation time of bound ligands was calculated by double-selective relaxation rate at 298 K, which showed that 1-3 had high affinity with the protein. The results indicate that investigation of 1H NMR relaxation data is a useful method to locate the new Lycopodium alkaloids as AchE inhibitors.     

Structural characterization of rubber from jackfruit and euphorbia as a model of natural rubber

A structural study of low molecular weight rubbers from Jackfruit (Artocarpus heterophyllus) and Painted spurge (Euphorbia heterophylla) was carried out as model compounds of natural rubber from Hevea brasiliensis. The rubber content of latex from Jackfruit was 0.4-0.7%, which is very low compared with that of 30-35% in the latex from Hevea tree. The rubber from Jackfruit latex was low molecular weight with narrow unimodal molecular weight distribution (MWD), whereas that obtained from E. heterophylla showed very broad MWD. The 1H and 13C NMR analyses showed that Jackfruit rubber consists of a dimethylallyl group and two trans-isoprene units connected to a long sequence of cis-isoprene units. The alpha-terminal group of Jackfruit rubber was presumed to be composed of a phosphate group based on the presence of 1H NMR signal at 4.08 ppm corresponding to the terminal =CH-CH2OP group.     

Reconstitution of Cu,Zn-superoxide dismutase by the Cu(I).glutathione complex

The reconstitution of Cu,Zn-superoxide dismutase from the copper-free protein by the Cu(I).GSH complex was monitored by: (a) EPR and optical spectroscopy upon reoxidation of the enzyme-bound copper; (b) NMR spectroscopy following the broadening of the resonances of the Cu(I).GSH complex after addition of Cu-free,Zn-superoxide dismutase; and (c) NMR spectroscopy of the Cu-free,Co(II) enzyme following the appearance of the isotropically shifted resonances of the Cu(I), Co enzyme, Cu(I).GSH was found to be a very stable complex in the presence of oxygen and a more efficient copper donor to the copper-free enzyme than other low molecular weight Cu(II) complexes. In particular, 100% reconstitution was obtained with stoichiometric copper at any GSH:copper ratio between 2 and 500. Evidence was obtained for the occurrence of a Cu(I).GSH.protein intermediate in the reconstitution process. In view of the inability of copper-thionein to reconstitute Cu,Zn-superoxide dismutase and of the detection of copper.GSH complexes in copper-over-loaded hepatoma cells (Freedman, J.H., Ciriolo, M.R., and Peisach, J. (1989) J. Biol. Chem. 264, 5598-5605), Cu(I).GSH is proposed as a likely candidate for copper donation to Cu-free,Zn-superoxide dismutase in vivo.     

Syntheses and physical characterization of new aliphatic triblock poly(L-lactide-b-butylene succinate-b-L-lactide)s bearing soft and hard biodegradable building blocks

This study presents chemical syntheses and physical characterization of a new aliphatic poly(L-lactide-b-butylene succinate-b-L-lactide) triblock copolyester with soft and hard biodegradable building blocks. First, poly(butylene succinate) (PBS) prepolymers terminated with hydroxyl functional groups were synthesized through melt polycondensation from succinic acid and 1,4-butanediol. Further, a series of new PLLA-b-PBS-b-PLLA triblock copolyesters bearing various average PLLA block lengths were prepared via ring opening polymerization of L-lactide with the synthesized hydroxyl capped PBS prepolymer (Mn = 4.9 KDa) and stannous octanoate as the macroinitiator and catalyst, respectively. By means of GPC, NMR, FTIR, DSC, TGA, and wide-angle X-ray diffractometer (WAXD), the macromolecular structures and physical properties were intensively studied for these synthesized PBS prepolymer and PLLA-b-PBS-b-PLLA triblock copolyesters. 13C NMR and GPC experimental results confirmed the formation of sequential block structures without any detectable transesterification under the present experimental conditions, and the molecular weights of triblock copolyesters could be readily regulated by adjusting the feeding molar ratio of L-lactide monomer to the PBS macroinitiator. DSC measurements showed all single glass transitions, and their glass transition temperatures were found to be between those of PLLA and PBS, depending on the lengths of PLLA blocks. It was noteworthy that the segmental flexibilities of the hard PLLA blocks were found to be remarkably enhanced by the more flexible PBS block partner, and the PBS and PLLA building blocks were well mixed in the amorphous regions. Results of TGA analyses indicated that thermal degradation and stabilities of the PLLA blocks strongly depended on the average PLLA block lengths of triblock copolyesters. In addition, FTIR and WAXD results showed the coexistence of the assembled PLLA and PBS crystal structures when the average PLLA block length became larger than 7.8. These results may be beneficial for this new biodegradable aliphatic triblock copolyester to be applied as a potential biomaterial.     

XRD studies of chitin-based polyurethane elastomers

Chitin-based polyurethane elastomers (PUEs) were synthesized by step growth polymerization techniques using poly(epsilon-caprolactone) (PCL) varying diisocyanate and chain extender structures. The viscosity average molecular weight (M(v)) of chitin was deduced from the intrinsic viscosity and found; M(v)=6.067 x 10(5). The conventional spectroscopic characterization of the samples with FTIR, (1)H NMR and (13)C NMR were in accordance with proposed PUEs structure. The crystalline behavior of the synthesized polymers were investigated by X-ray diffraction (XRD), differential scanning calorimetery (DSC) and loss tangent curves (tan delta peaks). The observed patterns of the crystalline peaks for the lower angle for chitin in the 2theta range were indexed as 9.39 degrees, 19.72 degrees, 20.73 degrees, 23.41 degrees and 26.39 degrees. Results showed that crystallinity of the synthesized PUEs samples was affected by varying the structure of the diisocyanate and chain extender. Crystallinity decreased from aliphatic to aromatic characters of the diisocyanates used in the final PU. The presence of chitin also favors the formation of more ordered structure, as higher peak intensities was obtained from the PU extended with chitin than 1,4-butane diol (BDO). The value of peak enthalpy (DeltaH) of chitin was found to be 47.13 J g(-1). The higher DeltaH value of 46.35 J g(-1) was found in the samples extended with chitin than BDO (39.73 J g(-1)).     

Photolytic depolymerization of alginate

A photochemical reaction has been developed for the partial de-polymerization of sodium alginate, a polysaccharide utilized in medicine, pharmacy, basic sciences and foods. An aqueous solution of sodium alginate was photochemically depolymerized to ∼40% of its average molecular weight using ultraviolet light in the presence of titanium dioxide catalyst at pH 7 over a period of 3 h. The products were separated giving four fractions all having an average molecular weight that was smaller than that of the starting material. Characterization of the guluronate (G) and mannuronate (M) contents, and determination of the M/G ratio of photochemically depolymerized alginate, were accomplished using ¹H NMR spectroscopy. The resulting M/G ratio was compared to that obtained for alginate fractions produced by acid hydrolysis. The M and G content, of each alginate fraction, was also assigned with regards to their occurrence in G-rich, M-rich or M/G heteropolymeric domains. This new depolymerization method might also be applicable in the preparation of alginate oligosaccharides for use in the food and pharmaceutical industries.     

Humicola insolens cutinase-catalyzed lactone ring-opening polymerizations: kinetic and mechanistic studies

This paper explores reaction kinetics and mechanism for immobilized Humicola insolenscutinase (HIC), an important new biocatalyst that efficiently catalyzes non-natural polyester synthetic reactions. HIC, immobilized on Lewatit, was used as catalyst for epsilon-caprolactone (CL) and omega-pentadecalactone (PDL) ring-opening polymerizations (ROPs). Plots of percent CL conversion vs time were obtained in the temperature range from 50 to 90 degrees C. The kinetic plot of ln([M]0/[M]t) vs time (r2 = 0.99) for HIC-catalyzed bulk ROP of CL was linear, indicating that chain termination did not occur and the propagation rate is first order with respect to monomer concentration. Furthermore, linearity to 90% conversion for M(n) vs fractional CL conversion is consistent with a chain-end propagation mechanism. Deviation from linearity above 90% conversion indicates that a competition between ring-opening chain-end propagation and chain growth by steplike polycondensations takes place at high monomer conversion. HIC was inactive for catalysis of L-lactide and (R,S)-beta-butyrolactone ROP. HIC-catalyzed ROP of epsilon-CL and PDL in toluene were successfully performed, giving high molecular weight poly(epsilon-caprolactone) and omega-poly(pentadecalactone). In addition, the relative activities of immobilized Candida antarctica lipase B (CALB) and HIC for epsilon-CL and PDL polymerizations are reported herein.     

Polycaprolactone-poly(ethylene glycol) multiblock copolymers as potential substitutes for di(ethylhexyl) phthalate in flexible poly(vinyl chloride) formulations

New high-molecular-weight hydrophobic/hydrophilic segmented copolymers of poly(ester ether carbonate) structure, containing poly(epsilon-caprolactone) (PCL) and poly(ethylene glycol) (PEG) segments in their main chain, were synthesized and characterized. These copolymers were obtained by a two-step chain-extension reaction carried out in the presence of alpha,omega-dihydroxy-oligoPCL of molecular weight 1250 and PEG samples of molecular weight 150, 400, 600, 1000, and 2000. The molecular structures of all synthesized materials were characterized by means of (1)H NMR and (13)C NMR spectroscopy, their molecular weights were determined by means of size exclusion chromatography, and their thermal properties were obtained by means of differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The poly(ester ether carbonate)s of this study are partly or totally miscible at least up to 50 wt % with poly(vinyl chloride) (PVC) and could be used to produce flexible PVC formulations. The miscibility between PVC and the poly(ester ether carbonate)s reported in this paper was investigated by means of DSC and DMA analysis. PVC blends were also analyzed by determining their swellability and the amount of extractables in aqueous media. By comparison purposes, the chain-extension product of PCL1250, that is, PCL polycarbonate, was also synthesized and characterized. The results obtained demonstrated that the copolymers with shortest PEG segment length, i.e. PEG150, 400, and 600, give the best results in terms of miscibility with PVC and lead to blends with maximum resistance to extraction by water. Therefore, they represent, in principle, good substitutes for low-molecular-weight, leachable PVC plasticizers, such as di(ethylhexyl) phthalate.     

Immunostimulatory polysaccharides from Chlorella pyrenoidosa. A new galactofuranan. measurement of molecular weight and molecular weight dispersion by DOSY NMR

Fractionation of the hot water extract of Chlorella pyrenoidosa was performed using a combination of ethanol precipitation, size exclusion chromatography, and anion exchange chromatography. One fraction contained a new polysaccharide, and this compound was shown to be a 1-->2-linked beta-d-galactofuranan from its 1D and 2D (1)H and (13)C NMR spectra, with a molecular weight of 15 kDa from DOSY NMR measurements. A number of other fractions were shown to have the same repeating unit as the previously identified arabinogalactan. However, arabinogalactans from different fractions were shown by DOSY NMR to have different molecular weights, which ranged from 27 to 1020 kDa. Agreement with molecular weights measured for some of these fractions by SEC-MALS was very good, further confirming the relationship established by Viel et al. between molecular weights of neutral polysaccharides and self-diffusion coefficients. The smaller molecular weight polysaccharides, the galactofuranan and the 27 and 50 kDa arabinogalactans, were shown to be close to monodisperse by analysis of the distributions of the self-diffusion coefficients for the polymers. The larger arabinogalactans had considerable variation in their molecular weights (188 +/- 109 kDa and 1020 +/- 370 kDa). Only the two larger arabinogalactans showed immunostimulatory activity.     

Characterization of the main phase transition in 1,2-dipalmitoyl-phosphatidylcholine luvs by 1H NMR

The main phase transition (Tm) of 100 nm large unilamellar vesicles (LUVs) of 1,2-dipalmitoylphosphatidylcholine (DPPC) was investigated using 1H NMR (proton magnetic resonance) in deuterium oxide, and both DSC (differential scanning calorimetry) and IR (infrared) spectroscopy in water and deuterium oxide. The ability of 1H NMR to determine Tm was demonstrated and the values obtained were in general agreement with those observed with DSC and IR. However, the temperature range of the transition observed by NMR was significantly broader than that observed with either DSC or IR. The effect of deuterium oxide on Tm was studied by comparing results obtained in water and deuterium oxide with DSC and IR. The results showed no significant difference in Tm or temperature range of transition determined in these solvents.     

Resorbable and highly elastic block copolymers from 1,5-dioxepan-2-one and L-lactide with controlled tensile properties and hydrophilicity

New resorbable and elastomeric ABA tri- and multiblock copolymers have been successfully synthesized by combining ring-opening polymerization with ring-opening polycondensation. Five different poly(L-lactide-b-1,5-dioxepan-2-one-b-L-lactide) triblock copolymers and one new poly(L-lactide-b-1,5-dioxepan-2-one) multiblock copolymer have been synthesized. The triblock copolymers were obtained by ring-opening polymerization of 1,5-dioxepan-2-one (DXO) and L-lactide (LLA) with a cyclic tin initiator. The new multiblock copolymer was prepared by ring-opening polycondensation of a low molecular weight triblock copolymer with succinyl chloride. The molecular weight and the composition of the final copolymers were easily controlled by adjusting the monomer feed ratio, and all of the polymers obtained had a narrow molecular weight distribution. It was possible to tailor the hydrophilicity of the materials by changing the DXO content. Copolymers with a high DXO content had a more hydrophilic surface than those with a low DXO content. The receding contact angle varied from 27 to 44 degrees. The tensile properties of the copolymers were controlled by altering the PDXO block length. The tensile testing showed that all the polymers were very elastic and had very high elongations-at-break (epsilon(b)). The copolymers retained very good mechanical properties (epsilon(b) approximately 600-800% and sigma(b) approximately 8-20 MPa) throughout the in vitro degradation study (59 days).     

Dendronized hydroxypropyl cellulose: synthesis and characterization of biobased nanoobjects

Dendronized polymers containing a cellulose backbone have been synthesized with the aim of producing complex molecules with versatile functionalization possibilites and high molecular weight from biobased starting materials. The dendronized polymers were built by attaching premade acetonide-protected 2,2-bis(methylol)propionic acid functional dendrons of generation one to three to a hydroxypropyl cellulose backbone. Deprotection or functionalization of the end groups of the first generation dendronized polymer to hydroxyl groups and long alkyl chains was performed, respectively. The chemical structures of the dendronized polymers were confirmed through analysis using (1)H NMR and FT-IR spectroscopies. From SEC analysis, the dendronized polymers were found to have an increasing polystyrene-equivalent molecular weight up to the second generation ( M n = 50 kg mol (-1)), whereas the polystyrene-equivalent molecular weight for the third generation was lower than for the second, although the same grafting density was obtained from (1)H NMR spectroscopy for the second and third generations. Tapping-mode atomic force microscopy was used to characterize the properties of the dendronized polymers in the dry state, exploring both the effect of the polar substrate mica and the less polar substrate highly oriented pyrolytic graphite (HOPG). It was found that the molecules were in the size range of tens of nanometers and that they were apt to undertake a more elongated conformation on the HOPG surfaces when long alkyl chains were attached as the dendron end-groups.     

Catalase-peroxidase of Mycobacterium bovis BCG converts isoniazid to isonicotinamide, but not to isonicotinic acid: differentiation parameter between enzymes of Mycobacterium bovis BCG and Mycobacterium tuberculosis

Isonicotinic acid hydrazide (Isoniazid, INH) is one of the major drugs worldwide used in the chemotherapy of tuberculosis. Many investigators have emphasized that INH activation is associated with mycobacterial catalase-peroxidase (katG). However, INH activation mechanism is not completely understood. In this study, katG of M. bovis BCG was separated and purified into two katGs, katG I (named as relatively higher molecular weight than katG II) and katG II, indicating that there is some difference in protein structure between two katGs. The molecular weight of the enzymes of katG I and katG II was estimated to be approximately 150,000 Da by gel filtration, and its subunit was 75,000 Da as determined by SDS-PAGE, indicating that purified enzyme was composed of two identical subunits. The specific activity of the purified enzyme katG I was 991.1 (units/mg). The enzymes were then investigated in INH activation by using gas chromatography mass spectrometry (GC-MS). The analysis of GC-MS showed that the katG I from M. bovis BCG directly converted INH (Mr, 137) to isonicotinamide (Mr, 122), not to isonicotinic acid (Mr, 123), in the presence or absence of H2O2. Therefore, this is the first report that katG I, one of two katGs with almost same molecular weight existed in M. bovis BCG, converts INH to isonicotinamide and this study may give us important new light on the activation mechanism of INH by KatG between M. bovis BCG and M. tuberculosis.     

In situ copolyesters containing poly(L-lactide) and poly(hydroxyalkanoate) units

In situ copolyesters containing polylactide (PLA) and polyhydroxyalkanoate (PHA) segments were obtained via ring-opening polymerization of L-lactide using PHA as a macroinitiator with stannous octoate as catalyst. Incorporation of PHA (20 wt %) into PLA affords a novel copolymer with Mn values ranging from 25 to 50 KDa and low polydispersities of 1.8-2.3. DSC analysis of the copolymer indicates well-defined crystallization and melting transitions different from the homopolymers and corresponding blend. The polymers were characterized by FT-IR, GPC, DSC, optical microscopy, NMR, and TGA. The results show successful reactivity of PHA as a macroinitiator for the ring-opening polymerization of lactide.     

Polymerization of propyl malolactonate in the presence of Candida rugosa lipase

To gain better insight into mechanistic features of enzyme-catalyzed malolactonate polymerization, reactions with propyl malolactonate were analyzed while varying enzyme concentration, reaction media composition, and reaction temperature. Monomer conversion and product molecular weights were characterized by (1)H NMR and MALDI-TOF MS, respectively. A high extent of thermal polymerization of propyl malolactonate was observed, while the polymer chain length in all reactions was controlled by the elimination of alpha-hydrogen from propyl malolactonate with formation of a new initiator and the new chains. The most efficient enzymatic catalysis occurred in toluene (2.11 M monomer) at 60 degrees C. Candida rugosa lipase (10 wt %) accelerated polymerization 25-fold over the rate of thermal polymerization. The maximum poly(propyl malate) number-average molecular weight obtained was 5000 Da at 20 wt % enzyme with a polydispersity of 1.15. These values compare with 1800 Da and 1.5, respectively, in the absence of enzyme.