Immobilization of Enzyme into Poly(vinyl alcohol) Membrane

Glucoamylase, invertase, and cellulase were entrapped within poly(vinyl alcohol) (PVA) membrane cross-linked by means of irradiation of ultraviolet light. The conditions for immobilization of glucoamylase were examined with respect to enzyme concentration in PVA, sensitizer (sodium benzoate) concentration in PVA, irradiation time, and membrane thickness. Various characteristics of immobilized glucoamylase were evaluated. Among them, the pH activity curve for the immobilized enzyme was superior to that for the native one, and thermal stability was improved by immobilization with bovine albumin. The apparent K(m) was larger for immobilized glucoamylase than for the native one, while V(max) was smaller for the immobilized enzyme. Also, the apparent K(m) appeared to be affected by the molecular size of the substrate. Further, immobilized invertase and cellulase showed good stabilities in repeating usage.     

聚乙烯醇降解酶研究进展

聚乙烯醇是一种广泛应用的水溶性聚合物,尤其作为纺织浆料。由于其生物难降解性,对水体会造成较大的污染,因此得到较多的关注。对聚乙烯醇生物处理的研究主要集中在生物降解酶和生物降解机理上,特别是随着对环境友好的酶加工纤维技术的不断发展,利用聚乙烯醇降解酶进行纺织脱浆已引起较大的兴趣。已发现的聚乙烯醇降解酶主要包括:聚乙烯醇氧化酶(仲醇氧化酶)、聚乙烯醇脱氢酶、β双酮水解酶(氧化型聚乙烯醇水解酶)。聚乙烯醇降解酶催化聚乙烯醇的生物降解主要分为两步进行。聚乙烯醇酶脱浆技术不仅节省了脱浆能耗,而且提高了脱浆废水的生物可降解性。     

Poly(vinyl alcohol) functionalized poly(dimethylsiloxane) solid surface for immunoassay

In this communication, we describe a simple and robust method for the covalent bonding of poly(vinyl alcohol) (PVA) on a silanized poly(dimethylsiloxane) (PDMS) surface. Nonspecific adsorption of proteins via hydrophobic-hydrophobic interactions of the PVA-coated surface is greatly reduced, and biomolecules can be rapidly anchored on the PVA-coated surface with high loading and uniformity. On the basis of a sandwich immunoassay with the anti-rabbit IgG and IgG pair as a model, the detection limit for IgG is down to 1 pg/mL with linearity up to 11 microg the levels often encountered in biological, forensic, and environmental samples.     

Use of poly(vinylpyrrolidone) and poly(vinyl alcohol) for cryoultramicrotomy

Summary Specimens infused with or suspended in a mixture of 10–30% poly(vinylpyrrolidone) and 2.07–1.61m sucrose can often be more easily frozen-sectioned than those infused with sucrose alone. The pH of such a mixture can be efficiently adjusted to neutrality by using Na₂CO₃. Use of poly(vinylpyrrolidone) causes little or no increase in the background level of immunolabelling. Adsorption staining of ultrathin frozen sections with a mixture of uranyl acetate and poly(vinyl alcohol), i.e. a simple thin-embedding of the sections in such a mixture, produces positive staining effects that are often enough to delineate structures of many organelles. When OsO₄-treated frozen sections are stained with uranyl acetate and further adsorption-stained with a mixture of lead citrate and poly(vinyl alcohol), the overall staining effects are similar to those observed in double-stained conventional sections.A large portion of the findings was reported as a part of the author's presentation in the 11th International Congress on Electron Microscopy, held in Kyoto, Japan, in 1986.     

Poly(vinyl alcohol) hydrogel as a biocompatible viscoelastic mimetic for articular cartilage

The prevalence of suboptimal outcome for surgical interventions in the treatment of full-thickness articular cartilage damage suggests that there is scope for a materials-based strategy to deliver a more durable repair. Given that the superficial layer of articular cartilage creates and sustains the tribological function of synovial joints, it is logical that candidate materials should have surface viscoelastic properties that mimic native articular cartilage. The present paper describes force spectroscopy analysis by nano-indentation to measure the elastic modulus of the surface of a novel poly(vinyl alcohol) hydrogel with therapeutic potential as a joint implant. More than 1 order of magnitude decrease in the elastic modulus was detected after adsorption of a hyaluronic acid layer onto the hydrogel, bringing it very close to previously reported values for articular cartilage. Covalent derivatization of the hydrogel surface with fibronectin facilitated the adhesion and growth of cultured rat tibial condyle chondrocytes as evidenced morphologically and by the observance of metachromatic staining with toluidine blue dye. The present results indicate that hydrogel materials with potential therapeutic benefit for injured and diseased joints can be engineered with surfaces with biomechanical properties similar to those of native tissue and are accepted as such by their constituent cell type.     

Purification and Characterization of an Esterase Involved in Poly(vinyl alcohol) Degradation by Pseudomonas vesicularis PD

An esterase catalyzing the hydrolysis of acetyl ester moieties in poly(vinyl alcohol) was purified 400-fold to electrophoretic homogeneity from the cytoplasmic fraction of Pseudomonas vesicularis PD, which was capable of assimilating poly(vinyl alcohol) as the sole carbon and energy source. The purified enzyme was a homodimeric protein with a molecular mass of 80 kDa and the isoelectric point was 6.8. The pH and temperature optima of the enzyme were 8.0 and 45°C. The enzyme catalyzed the hydrolysis of side chains of poly(vinyl alcohol), short-chain p-nitrophenyl esters, 2-naphthyl acetate, and phenyl acetate, and was slightly active toward aliphatic esters. The enzyme was also active toward the enzymatic degradation products, acetoxy hydroxy fatty acids, of poly(vinyl alcohol). The K _m and V _max of poly(vinyl alcohol) (degree of polymerization, 500; saponification degree, 86.5-89.0 mol%) and p-nitrophenyl acetate were 0.381% (10.6 mM as acetyl content in the polymer) and 2.56 μM, and 6.52 and 12.6 μmol/min/mg, respectively. The enzyme was strongly inhibited by phenylmethylsulfonyl fluoride and diisopropyl fluorophosphate at a concentration of 5 mM, which indicated that the enzyme was a serine esterase. The pathway for the metabolism of poly(vinyl alcohol) is also discussed.     

Poly(vinyl alcohol) acetoacetate-based tissue adhesives are non-cytotoxic and non-inflammatory

Polymer-based tissue adhesives composed of poly(vinyl alcohol) acetoacetate (PVOH acac) and cross-linking amines were investigated for their effects on cell survival and inflammatory cell activation using in vitro mouse cell cultures. Cytotoxicity of tissue adhesives was evaluated by placing adhesives in direct contact with 3T3 fibroblast cells. Tissue adhesives formulated from PVOH acac and 3-aminopropyltrialkoxysilane (APS) were non-cytotoxic to fibroblasts; adhesives formulated from PVOH acac and aminated poly(vinyl alcohol) (PVOH amine) were also non-cytotoxic to fibroblasts. In contrast, a commercial adhesive composed of 2-octyl cyanoacrylate was highly cytotoxic to fibroblasts. The inflammatory potential of tissue adhesives was evaluated by exposing J774 macrophage cells to adhesives, and measuring TNF-α release from macrophages. PVOH acac-based tissue adhesives did not elicit inflammatory TNF-α release from macrophages. These results suggest that PVOH acac-based tissue adhesives are non-cytotoxic and non-inflammatory. Such tissue adhesives represent a promising technology for a variety of medical applications, including surgical wound closure and tissue engineering, and the results are also significant in the design of in vitro cell culture systems to study biomaterials.     

Characterization of enzymatic hydrolyzed snow crab (Chionoecetes opilio) by-product fractions: A source of high-valued biomolecules

Snow crab (Chionoecetes opilio) constitutes valuable and nutritional sources of components, such as proteins, lipids and chitin. The present investigation was undertaken to evaluate the feasibility of applying a pilot scale enzymatic hydrolysis process of snow crab by-products, followed by fractionation, in order to recover enriched high-valued compounds. The yield of snow crab by-products recovered after manual processing; on a dry weight was 87.4%. The by-products (raw materials) were mainly moist (approximately 78%), and contained 42.9% proteins, 14.8% lipids, 25.7% minerals, 16.2% chitin, all expressed on a dry weight. The fatty acid profile of snow crab by-products and all fractions obtained following processing showed a higher content in mono-unsaturated fatty acids (MUFAs; approximately 50%), followed by polyunsaturated fatty acids (PUFAs; approximately 20%) and saturated fatty acids (SFAs; approximately 15%). The n − 3/n − 6 ratio was approximately 10 and represents a good index of nutritional value for snow crab oil by-products. Most protein enriched fractions demonstrate a well-balanced amino acid composition, notably the most essential amino acids. These protein fractions are characterized by biomolecules having a relatively low molecular weight (35 kDa and less) range. The enzymatic hydrolysis process developed in this study shows that snow crab by-products should to be viewed as having the potential of being identified as high-valued products. Even though the process could be optimized, it is controllable, and depending on hydrolyses conditions, the products obtained are reproducible and well defined. Results presented in this study indicate that snow crab by-products may serve as excellent nutritional components for future applications in the health and food sectors.     

应用Dot—ELISA检测PVX,PVY和PVS

以ＮＣＭ为固相载体、应用间接ＥＬＩＳＡ法测定了纯化的ＰＶＸ、ＰＶＹ和ＰＶＳ;对接种的烟草,马铃薯块茎的芽、休眠块茎顶端的稀释度ＰＶＸ分别为：１／２０４８０－１／８１９２０、１／５１２０;ＰＶＹ分别为１／８１９２０、１／２０４８０和１／５１２０;ＰＶＳ分别为１／８１９２０－１／３２７６８０、１／２０４８０－１／８１９２０和１／５１２０－１／２０４８０,和Ｃｏｃｋｔａｉｌ－ＥＬＩＳＡ相关,检测ＰＶＸ和     

(Bio)fouling of Polymeric Membranes: Atomic Force Microscope Study

Atomic force microscopy (AFM), in conjunction with colloid probe, coated colloid probe and cell probe techniques, has been used to measure directly the adhesive force between a polystyrene sphere (diameter 11 μm), protein bovine serum albumin (BSA) and a yeast cell, and two different membranes. These were polymeric ultrafiltration membranes of similar MWCO (4000 Da) but of different materials (ES 404 and XP 117, PCI Membrane Systems Ltd (UK)). The colloid probe was created by immobilising a polystyrene sphere onto a tipless V‐shaped AFM cantilever. The coated probe was made by adsorbing BSA on a 5 μm silica colloid, while immobilising a single yeast cell on such a tipless cantilever created the cell probe. Measurements were made in 10^–2 M NaCl solution. It was found for polystyrene, protein and cell systems that the adhesive force at the ES 404 membrane was greater than that at the XP 117 membrane. The paper shows that the colloid probe, coated colloid probe and cell probe techniques can provide useful means of directly quantifying the adhesion of both inorganic and biological materials to membrane surfaces.     

Immobilization of hog pancreas lipase in macroporous poly(vinyl alcohol)-cryogel carrier for the biocatalysis in water-poor media

Hog pancreas lipase was covalently attached to the beads of poly(vinyl alcohol)-cryogel – a macroporous hydrogel prepared by means of freeze-thaw technique. The immobilized biocatalyst thus obtained was examined in the reaction of enantioselective hydrolysis of the ethyl ester of N-benzylidene derivative of DL-phehylalanine in the medium of acetonitrile (contained 5 vol.% of water without any buffers). Eighty-three %-enantiomeric excess of the l-amino acid was reached after 144 h. Virtually the same result was obtained in the repeated use of the same immobilized biocatalyst after its 6-months-storing in a refrigerator.     

Cloning and Characterization of the Gene Encoding Pyrroloquinoline Quinone-dependent Poly (vinyl alcohol) Dehydrogenase of Pseudomonas sp. Strain VM15C

A gene library of poly (vinyl alcohol) (PVA)-degrading Pseudomonas sp. strain VM15C was constructed in Escherichia coli with the vector pUC18. Screening of this library with a chromogenic PVA dehydrogenase assay resulted in the isolation of a clone that carries the gene (pdh) for the PVA dehydrogenase, and the entire nucleotide sequence of its structural gene was determined. The gene encodes a protein of 639 amino acid residues (68,045 Da) and in the deduced amino acid sequence, some putative functional sites, a signal sequence, a heme c-binding site, and a PQQ-binding site, were detected. The amino acid sequence showed low similarity to other types of quinoprotein dehydrogenases. PVA dehydrogenase expressed in E. coli clones required PQQ. Ca²⁺, and Mg²⁺ stimulated the activity. PVA-dependent heme c reduction occurred with exogenous PQQ in cell extracts of the E. coli clone. The PVA dehydrogenase in the E. coli clone was localized in the cytoplasm.     

Tools for Selective Enzyme Reaction Steps in the Synthesis of Laboratory Chemicals

The need for more selective reactions steps and the compatibility between process steps which follow on from each other has been a major driving force for organic synthesis. The synthesis of chiral compounds, metabolites, new chemical entities and natural products by a combination of chemical and enzyme reaction steps has become well established, due the existence of stable enzymes as selective catalysts which are inherently chiral by nature. Auxiliary tools such as suitable transfer reagents for reaching complete conversion, easy and robust reaction control as well as tools for straightforward workup and purification of the final product have been developed. Selective enzyme reaction steps in the area of hydrolyses, oxidation steps including hydroxylation and the Baeyer‐Villiger oxidation, carbon‐carbon bond formation and glycosylation reactions have compared favorably with existing methods of classical organic synthesis. The tools developed during optimization and scale‐up of these enzyme reaction steps have the potential to shorten development time. The introduction of selective enzyme reactions into an entire synthetic process has resulted in harmonization of improvements in economic efficiency with resultant solutions to health, safety and environment problems. This will become even more important in industrial synthetic chemistry in the future, for convenient solutions to certain intractable synthetic problems and for expanding the repertoire of chemistry by modular biocatalysts. Efficient isolation procedures for the final product are essential to take full advantage of the biocatalytic conversion to obtain high product yields.     

Modeling of a Catalyzed Reaction Using Lipase Immobilized in a Poly(vinyl alcohol) Membrane

A mathematical model for the hydrolysis reaction of p‐nitro phenol laurate catalyzed by a lipase immobilized in a membrane was developed. In an earlier study this model reaction was found to show very different reaction rates when it was performed in aqueous micellar solution with free enzyme and with membrane immobilized enzyme. It was assumed that a local accumulation of substrate in the membrane is responsible for the observed rate enhancement. The conversion of p‐nitro phenol ester within the membrane was modeled by considering a combination of the convective flow through poly(vinyl alcohol) membrane pores, concentration polarization of substrate containing micelles at the membrane surface and the kinetics of the reaction with free enzymes. It was demonstrated that the model offered a comprehensive understanding of the interaction of the involved phenomena. The modeling results are in good agreement with the experimental data from 10 runs with different enzyme and substrate concentrations. The substrate concentration at the membrane surface increased by up to a factor of 3 compared to the feed concentration. This effect explains the observed rate enhancement. Moreover, the model was used to determine the unknown parameters, i.e., the intrinsic retention and the mass transfer coefficient, by fitting the model to the experimental data. The model may also be used to calculate the optimum operating conditions and design parameters of such a reactor.     

Synthesis and properties of carrageenan grafted copolymer with poly(vinyl alcohol)

The aim of this work was to prepare a carrageenan-g-poly(vinyl alcohol) (CG-g-PVA) polymer using potassium persulphate as an initiator. The effect of different ratios of the polymer blends on the parameters of the grafted polymer was investigated. The grafting ratio decreased with an increase of the CG content in the graft copolymer. The resulting CG-g-PVA was characterized by ATR-FTIR, tensile strength, elongation at break, swelling ratio, contact angle and biodegradation in soil. From the ATR-FTIR the 3,6-anhydride-galactose of the CG showed a peak at 927 cm⁻¹ that was absent in the CG-g-PVA and the ether linkage of PVA-g-CG between the hydroxyl group of PVA and the 3,6-anhydride-galactose of CG showed a peak at 1089 cm⁻¹ in the graft copolymer. The tensile strength and elongation at break decreased with an increase of the CG due to its phase separation. The highest tensile strength was observed at 2:8 CG/PVA. In addition, the swelling ratio decreased and the contact angle increased as a function of the increase of the CG in the grafted copolymer. The best ratio of CG-g-PVA was 2:8 CG/PVA. This graft copolymer was easily biodegraded in natural soil.     

聚乙烯醇/葡聚糖复合凝胶的制备及药物释放规律的研究

目的:采用冷冻-解冻物理交联方法制备聚乙烯醇(PVA)和葡聚糖(Dextran)混合凝胶.并考察复合凝胶药物释放规律.方法:含有胰岛素的PVA/Dextran溶液置于-20℃条件下冷冻8 h,在室温下解冻4 h,反复冷冻-解冻数次制备得到胰岛素PVA/Dextran复合凝胶,反相高效液相色谱法考察了胰岛素的体外释放行为.结果:胰岛素复合凝胶体外释放模式符合Higuchi扩散方程.当PVA/Dextran比例从100/0降到80/20,胰岛素释放速率明显增加,最大释放率从45%增加到65%.当冷冻-解冻循环次数从2增加到6,胰岛素达到最大释放的时间从24 h增加到45 h,最大释放率从70%降到50%.释放介质的温度的升高能显著增加胰岛素的释放速率.结论:PVA/Dextran制备的胰岛素复合凝胶具有良好的缓释效果.PVA/Dextran复合凝胶是一种较有前景的水凝胶药物载体.     

Research on the Long Time Swelling Properties of Poly (vinyl alcohol)/Hydroxylapatite Composite Hydrogel

Poly(vinyl alcohol)/hydroxylapatite(PVA/HA)composite hydrogel was prepared by repeated freezing and thawing.Thewater loss properties of the resultant hydrogel were investigated by using optical microscope.Long time immersion tests ofPVA/HA composite hydrogel were carried out in the diluted calf serum solution to study the change laws of swelling propertieswith the freezing-thawing cycles and HA content.The micro-morphologies of PVA/HA composite hydrogel after long timeimmersion were observed by means of the high-accuracy 3D profiler.The results show that the swelling process of PVA/HAcomposite hydrogel is the converse process of its water loss.Long time swelling ratio curves of PVA/HA composite hydrogel inthe calf serum solution are manifested as four stages of quick increase,decrease,slow decrease and stable balance,and itsequilibrium swelling ratio decreases with the increase of freezing-thawing cycles and HA content.It is revealed that the networkstructure of the composite hydrogel immersed for a long period is significantly improved with the increase of HA content.Perfect network structures of PVA/HA composite hydrogel as well as full and equilibrium tissues after swelling equilibrium areobtained when the HA content is 3% and the number of freezing-thawing cycles is 7.     

Preparation, characterization, and properties of chitosan-g-poly(vinyl alcohol) copolymer

The graft copolymer chitosan-g-poly(vinyl alcohol), with nontoxicity, biodegradability, and biocompatibility, was prepared by a novel method. The copolymer with porous net structure was observed by scanning electron microscopy (SEM). It is a potential method to combine chitosan with the synthetic polymers. The grafting reactions were conducted with various poly(vinyl alcohol) (PVA)/6-O-succinate-N-phthaloyl-chitosan (PHCSSA) feed ratios to obtain chitosan-g-poly(vinyl alcohol) copolymers with various PVA contents. The chemical structure of the chitosan-g-poly(vinyl alcohol) was characterized by Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and SEM were also detected to characterize the copolymer.     

Membranes and calcium sequestration during spermiogenesis in the cotton seed bug (Dysdercus intermedius: Heteroptera)

Summary By use of osmium ferricyanide (OsFeCN) staining the fate of cytoplasmic membranes was followed during spermiogenesis in the cotton seed bug (Dysdercus intermedius). During early spermiogenesis interzonal lamellae of endoplasmic reticulum become aggregated as a stack of membranes traversing the entire cell body from the nucleus to the cytoplasmic bridge connecting neighbouring spermatids. Cisternae of endoplasmic reticulum ensheath the acroblast from which vesicles of different sizes are pinched off into the cytoplasm. The oxalate method was used to show that acroblast and associated vesicles are calcium-sequestering sites in spermatids. Membrane profiles with dense calcium oxalate precipitate derived from the acroblast form an uninterrupted membranous sheath at the apical side of the nucleus where the proacrosome will be attached. With further development of the spermatids, the vesicles derived from the acroblast also participate in forming a calciumsequestering sheath enveloping the axoneme and the mitochondrial nebenkern derivatives.     

Biomimetic Hydrophobic Surfaces with Low or High Adhesion Based on Poly(vinyl alcohol) and SiO2 Nanoparticles

Superhydrophobic surfaces are often found in nature,such as plant leaves and insect wings.Inspired by superhydrophobic phenomenon of the rose petals and the lotus leaves,biomimetic hydrophobic surfaces with high or low adhesion were prepared with a facile drop-coating approach in this paper.Poly(vinyl alcohol) (PVA) was used as adhesive and SiO2 nanoparticles were used to fabricate surface micro-structure.Stearic acid or dodecafluoroheptyl-propyl-trimethoxysilane (DFTMS) were used as low surface energy materials to modify the prepared PVA/SiO2 coating surfaces.The effects of size of SiO2 nanoparticles,concentration of SiO2 nanoparticle suspensions and the modifications on the wettability of the surface were investigated.The morphology of the PVA/SiO2 coating surfaces was observed by using scanning electron microscope.Water contact angle of the obtained superhydrophilic surface could reach to 3°.Stearic acid modified PVA/SiO2 coating surfaces showed hydrophobicity with high adhesion.By mixing the SiO2 nanoparticles with sizes of 40 nm and 200 nm and modifying with DFTMS,water contact angle of the obtained coating surface could be up to 155° and slide angle was only 5°.This work provides a facile and useful method to control surface wettability through changing the roughness and chemical composition of a surface.