Production of lipase by high cell density fed-batch culture of Candida cylindracea

Candida cylindracea NRRL Y-17506 was grown to produce extracellular lipase from oleic acid as a carbon source. Through flask cultures, it was found that the optimum initial oleic acid concentration for cell growth was 20 g l⁻¹. However, high initial concentrations of oleic acid up to 50 g l⁻¹ were not inhibitory. The highest extracellular lipase activity obtained in flask culture was 3.0 U ml⁻¹ after 48 h with 5 g l⁻¹ of initial oleic acid concentration. Fed-batch cultures (intermittent and stepwise feeding) were carried out to improve cell concentration and lipase activity. For the intermittent feeding fed-batch culture, the final cell concentration was 52 g l⁻¹ and the extracellular lipase activity was 6.3 U ml⁻¹ at 138.5 h. Stepwise feeding fed-batch cultures were carried out to simulate an exponential feeding and to investigate the effects of specific growth rate (0.02, 0.04 and 0.08 h⁻¹) on cell growth and lipase production. The highest final cell concentration obtained was 90 g l⁻¹ when the set point of specific growth rate (μ_set) was 0.02 h⁻¹. High specific growth rate (0.04 and 0.08 h⁻¹) decreased extracellular lipase production in the later part of fed-batch cultures due to build-up of the oleic acid oversupplied. The highest extracellular lipase activity was 23.7 U ml⁻¹ when μ_set was 0.02 h⁻¹, while the highest lipase productivity was 0.31 U ml⁻¹ h⁻¹ at μ_set of 0.08 h⁻¹.     

Engineering of <Emphasis Type="Italic">Bacillus</Emphasis> lipase by directed evolution for enhanced thermal stability: effect of isoleucine to threonine mutation at protein surface

A lip gene from a Bacillus isolate was cloned and expressed in E. coli. By thermal denaturation analysis, T_1/2 of lipase was observed to be 7 min at 50°C with less than 10% activity after 1 h incubation at 50°C. To expand the functionality of cloned lipase, attempts have been made to create thermostable variants of lip gene. A lipase variant with an isoleucine to threonine amino acid substitution at the protein surface was isolated that demonstrated higher thermostability than its wild type predecessor. To explore the structure–function relationship, the lip gene product of wild type (WT) and mutant was characterized in detail. The mutation enhanced the specific activity of enzyme by 2-folds when compared with WT. The mutant enzyme showed enhanced T_1/2 of 21 min at 50°C. The kinetic parameters of the mutant enzyme were significantly altered. The mutant enzyme displayed higher affinity for substrate (decreased K _m ) in comparison to the wild type. The k _cat and catalytic efficiency (k _cat/K _m ) of mutant were also enhanced by two and five times, respectively, as compared with the WT. The mutation resides on the part of helix which is exposed to the solvent and away from the catalytic triad. The replacement of a solvent exposed hydrophobic residue (Ile) in WT with a hydrophilic residue (Thr) in mutant might impart thermostability to the protein structure.     

Preparation of stearoyl lactic acid ester catalyzed by lipases from Rhizomucor miehei and porcine pancreas optimization using response surface methodology

The esterification reaction between stearic acid and lactic acid using Rhizomucor miehei lipase and porcine pancreas lipase was optimized for maximum esterification using response surface methodology. The formation of the ester was found to depend on three parameters namely enzyme/substrate ratio, lactic acid (stearic acid) concentration and incubation period. The maximum esterification predicted by theoretical equations for both lipases matched well with the observed experimental values. In the case of R. miehei lipase, stearoyl lactic acid ester formation was found to increase with incubation period and lactic acid (stearic acid) concentrations with maximum esterification of 26.9% at an enzyme/substrate (E/S) ratio of 125 g mol⁻¹. In the case of porcine pancreas lipase, esterification showed a steady increase with increase in incubation period and lactic acid (stearic acid) concentration independent of the E/S ratios employed. In the case of PPL, a maximum esterification of 18.9% was observed at an E/S ratio of 25 g mol⁻¹ at a lactic acid (stearic acid) concentration of 0.09 M after an incubation period of 72 h. Received: 12 February 1999 / Received revision: 31 May 1999 / Accepted: 4 June 1999     

Identification of Intestinal Bacteria Responsible for Fermentation of Gum Arabic in Pig Model

Acacia spp. produce gum exudates, traditionally called gum arabic or gum acacia, which are widely used in the food industry such as emulsifiers, adhesives, and stabilizers. The traditional gum arabic is highly variable with average molecular weights varying from 300,000–800,000. For this reason a standardized sample was used for the present experiments, based on a specific species of gum arabic (Acacia(sen)SUPER GUM^TM EM2). The literature indicates that gum arabic can be fermented by the intestinal bacteria to short chain fatty acid, particularly propionate. However, the bacteria responsible for the fermentation have not been determined. In this study, we used enrichment culture of pig cecal bacteria from the selected high molecular weight specific gum arabic of (M_W 1.77 × 10⁶). We found Prevotella ruminicola-like bacterium as a predominant bacterium that is most likely to be responsible for fermentation of the gum arabic used to propionate.     

Effects of acetic acid and lactic acid on the growth of Saccharomyces cerevisiae in a minimal medium

Specific growth rates (μ) of two strains of Saccharomyces cerevisiae decreased exponentially (R ²>0.9) as the concentrations of acetic acid or lactic acid were increased in minimal media at 30°C. Moreover, the length of the lag phase of each growth curve (h) increased exponentially as increasing concentrations of acetic or lactic acid were added to the media. The minimum inhibitory concentration (MIC) of acetic acid for yeast growth was 0.6% w/v (100 mM) and that of lactic acid was 2.5% w/v (278 mM) for both strains of yeast. However, acetic acid at concentrations as low as 0.05–0.1% w/v and lactic acid at concentrations of 0.2–0.8% w/v begin to stress the yeasts as seen by reduced growth rates and decreased rates of glucose consumption and ethanol production as the concentration of acetic or lactic acid in the media was raised. In the presence of increasing acetic acid, all the glucose in the medium was eventually consumed even though the rates of consumption differed. However, this was not observed in the presence of increasing lactic acid where glucose consumption was extremely protracted even at a concentration of 0.6% w/v (66 mM). A response surface central composite design was used to evaluate the interaction between acetic and lactic acids on the specific growth rate of both yeast strains at 30C. The data were analysed using the General Linear Models (GLM) procedure. From the analysis, the interaction between acetic acid and lactic acid was statistically significant (P≤0.001), i.e., the inhibitory effect of the two acids present together in a medium is highly synergistic. Journal of Industrial Microbiology & Biotechnology (2001) 26, 171–177. Received 06 June 2000/ Accepted in revised form 21 September 2000     

Vertebrate endothelial lipase: comparative studies of an ancient gene and protein in vertebrate evolution

Endothelial lipase (gene: LIPG; enzyme: EL) is one of three members of the triglyceride lipase family that contributes to lipoprotein degradation within the circulation system and plays a major role in HDL metabolism in the body. In this study, in silico methods were used to predict the amino acid sequences, secondary and tertiary structures, and gene locations for LIPG genes and encoded proteins using data from several vertebrate genome projects. LIPG is located on human chromosome 18 and is distinct from other human ‘neutral lipase’ genes, hepatic lipase (gene: LIPC; enzyme: HL) and lipoprotein lipase (gene: LPL; enzyme: LPL) examined. Vertebrate LIPG genes usually contained 10 coding exons located on the positive strand for most primates, as well as for horse, bovine, opossum, platypus and frog genomes. The rat LIPG gene however contained only 9 coding exons apparently due to the presence of a ‘stop’ codon’ within exon 9. Vertebrate EL protein subunits shared 58–97% sequence identity as compared with 38–45% sequence identities with human HL and LPL. Four previously reported human EL N-glycosylation sites were predominantly conserved among the 10 potential N-glycosylation sites observed for the vertebrate EL sequences examined. Sequence alignments and identities for key EL amino acid residues were observed as well as conservation of predicted secondary and tertiary structures with those previously reported for horse pancreatic lipase (PL) (Bourne et al. 1994). Several potential sites for regulating LIPG gene expression were observed including CpG islands near the LIPG gene promoter and a predicted microRNA binding site near the 3’-untranslated region. Promoter regions containing functional polymorphisms that regulate HDL cholesterol in baboons were conserved among primates but not retained between primates and rodents. Phylogenetic analyses examined the relationships and potential evolutionary origins of the vertebrate LIPG gene subfamily with other neutral triglyceride lipase gene families, LIPC and LPL. It is apparent that the triglyceride lipase ancestral gene for the vertebrate LIPG gene predated the appearance of fish during vertebrate evolution >500 million years ago.     

Effect of nitrogen limitation on oleic acid biosynthesis in <Emphasis Type="Italic">Botryococcus braunii</Emphasis>

The influence of nitrogen (N) deficiency on the cell growth and intracellular lipid production of the alga Botryococcus braunii UTEX 572 was investigated. Biomass concentration and lipid content of B. braunii cultivated in modified Chu-13 medium containing 0.04, 0.37, and 3.66 mM nitrate were 0.23–0.38 g L⁻¹ and 36–63% of dry cell weight, respectively. The specific growth rate of B. braunii reached a constant of 0.185 day⁻¹ during cultivation with an initial nitrate feed of 3.66 mM. The maximum lipid content of B. braunii was 63% with 0.04 mM nitrate. However, the maximum lipid productivity of 0.019 g L⁻¹ day⁻¹ was achieved with 0.37 mM nitrate. The level of oleic acid, an important component of biodiesel, was higher at 86% of the total fatty acids under N-limited conditions (0.04 mM nitrate) compared to 69% under N-sufficient conditions (3.66 mM nitrate). Furthermore, expression of the stearoyl-ACP desaturase gene (sad) encoding a stearoyl-ACP desaturase involved in the synthesis of oleic acid was 2.6-fold higher under N-limited conditions than under N-sufficient conditions.     

Optical Resolution of (±)-Metyrosine

A lipase gene (lip) and its activator gene (act) on a 2.9 kb BglII-EcoRI fragment from Pseudomonas sp. KWI-56 were cloned in Escherichia coli using pUC19 as a vector plasmid. From the sequencing results, the open reading frames of the lip and the act were found to contain 1092 and 1032 nucleotides, respectively. The act existed downstream of the lip with the same orientation. When the lip was expressed in E. coli using the lac promoter on the pUC plasmid vector, the lipase activity of E. coli carrying both the lip and the act was 200-fold greater than that carrying only the lip. This result suggested the act was important in the expression of the lip in E. coli.     

Substrate selectivity of various lipases in the esterification of cis- and trans-9-octadecenoic acid

The substrate selectivity of numerous commercially available lipases from microorganisms, plants and animal tissue towards 9-octadecenoic acids with respect to the cis/trans configuration of the CC double bond was examined by the esterification of cis- and trans-9-octadecanoic acid (oleic and elaidic acid respectively) with n-butanol in n-hexane. A great number of lipases studied, e.g. those from Pseudomonas sp., porcine pancreas or Carica papaya, were unable to discriminate between the isomeric 9-octadecenoic acids. However, lipases from Candida cylindracea and Mucor miehei catalysed the esterification of oleic acid 3–4 times faster than the corresponding reaction of elaidic acid and therefore have a high preference for the cis isomer. Of all biocatalysts examined, only recombinant lipases from Candidaantarctica favoured elaidic acid as substrate. While the preference of Candida antarctica lipase B for the trans isomer was quite low, Candida antarctica lipase A had an extraordinary substrate selectivity and its immobilized enzyme preparation [Chirazyme L-5 (3) from Boehringer] esterified elaidic acid about 15 times faster than oleic acid. Received: 29 October 1998 / Received revision: 18 December 1998 / Accepted: 21 December 1998     

Codon optimization through a two-step gene synthesis leads to a high-level expression of Aspergillus niger lip2 gene in Pichia pastoris

Aspergillus niger lipases are important biocatalysts for a broad range of industrial applications. To enhance the expression level of a newly cloned lipase gene lip2 of A. niger in Pichia pastoris, we applied codon optimization and synthesized the full length codon-optimized gene by a two-step gene synthesis strategy. This strategy consists of an assembly PCR for several small DNA fragments and enzymatic digestion and ligation steps to ligate these fragments into the full-length gene. First, the full-length lip2 gene was divided into three fragments F1 (237 bp), F2 (238 bp) and F3 (422 bp) with the additions of proper restriction sites, and separately amplified by assembly PCR reactions. Second, three PCR amplified fragments were digested and ligated into the full-length lip2 gene. In the two-step gene synthesis, synthesis of smaller DNA fragments resulted in a significant lower level of nonspecific mismatching among oligonucleotides and a very low mutational rate of the PCR products, demonstrating the superiority of the method. When compared with the originally cloned lip2 gene of A. niger, the new codon optimized lip2 gene expressed at a significantly higher level in yeasts after methanol induction for 72 h, and both the enzyme activity and protein content reached maximal levels of 191 U/ml and 154 mg/1, with 11.6- and 5.3-fold increases, respectively.     

Cloning of a novel lipase gene, <Emphasis Type="Italic">lipJ08,</Emphasis> from <Emphasis Type="Italic">Candida rugosa</Emphasis> and expression in <Emphasis Type="Italic">Pichia pastoris</Emphasis> by codon optimization

A novel lipase gene, lipJ08, was cloned from Candida rugosa ATCC14830, along with the already reported five lipase genes (lip1–lip5). Nucleotide sequencing indicated that the lipJ08 gene contains a 1650 bp open reading frame (ORF) without introns. The deduced amino acid sequence corresponds to 534 amino acid residues, including a putative signal sequence of 15 amino acid residues. Seventeen of the non-universal serine codons (CTG) of lipJ08 were converted into universal serine codons (TCT) by PCR-based mutagenesis. The native and codon-optimized lipJ08 genes were expressed in Pichia pastoris. The hydrolytic activity of the recombinant LIPJ08 was 4.7 U/ml, whereas the activity of the recombinant wild-type lipase could not be detected.     

Production of 10,12-dihydroxy-8(E)-octadecenoic acid, an intermediate in the conversion of ricinoleic acid to 7,10,12-trihydroxy-8(E)-octadecenoic acid by Pseudomonas aeruginosa PR3

A bacterial isolate, Pseudomonas aeruginosa (PR3), has been reported to produce a new compound, 7,10,12-trihydroxy-8(E)-octadecenoic acid (TOD), from ricinoleic acid (Kuo TM, LK Manthey and CT Hou. 1998. J Am Oil Chem Soc 75: 875–879). The reaction is unique in that it involves an introduction of two additional hydroxyl groups at carbon 7 and 10 and a rearrangement of the double bond from carbon 9–10 (cis) to 8–9 (trans). In an effort to elucidate the metabolic pathway involved in the formation of TOD from ricinoleic acid by PR3, we have isolated another compound from the reaction mixture using HPLC. The structure of the new compound was determined to be 10, 12-dihydroxy-8(E)-octadecenoic acid (DHOD) by GC/MS, FTIR, and NMR. The structural similarity between DHOD and TOD and the results from the time course study of the above two compounds strongly suggested that DHOD was an intermediate in the bioconversion of ricinoleic acid to TOD by PR3. The optimum pH and temperature for the production of DHOD from ricinoleic acid by PR3 was 6.5 and 25°C, respectively. This is the first report on the production of 10,12-dihydroxy-8(E)-octadecenoic acid from ricinoleic acid by PR3. Journal of Industrial Microbiology & Biotechnology (2000) 24, 167–172. Received 28 July 1999/ Accepted in revised form 18 November 1999     

Cloning and characterization of Rv0621 gene related to surfactant stress tolerance in <Emphasis Type="Italic">Mycobacterium tuberculosis</Emphasis>

To understand how Mycobacterium tuberculosis (M. tuberculosis) could survive in human lung, Genomic expression library of M. tuberculosis in Escherichia coli (E. coli) had been prepared. Taking advantage of the genetic simplicity of E. coli and the functional conservation of some prokaryote proteins, a surfactant stress resistant gene Rv0621 was identified, which encodes a 37 kDa putative membrane protein. The E. coli colony with the partial Rv0621 gene insert, named S1, was able to grow in medium containing 0.4% sodium dodecyl sulfate, while the strain carried empty vector was unable to grow. The full length of the Rv0621 gene was then cloned into plasmid pET32a (+) expressed in E. coli BL21 (DE3). Using gas chromatographic–mass spectrometric (GC–MS), the fatty acid composition of the E. coli BL21 (DE3) carrying Rv0621–pET32a (+) and the E. coli BL21 (DE3) carrying empty vector pET32a (+) were compared. E. coli BL21 (DE3) carrying Rv0621–pET32a (+) contained more oleic acid. This suggests the gene may be involved in regulation of fatty acid synthesis and M. tuberculosis resistance to the surfactant defense of its host.     

Co-expression of the lipase and foldase of Pseudomonas aeruginosa to a functional lipase in Escherichia coli

The lipA gene, a structural gene encoding for protein of molecular mass 48 kDa, and lipB gene, encoding for a lipase-specific chaperone with molecular mass of 35 kDa, of Pseudomonas aeruginosa B2264 were co-expressed in heterologous host Escherichia coli BL21 (DE3) to obtain in vivo expression of functional lipase. The recombinant lipase was expressed with histidine tag at its N terminus and was purified to homogeneity using nickel affinity chromatography. The amino acid sequence of LipA and LipB of P. aeruginosa B2264 was 99–100% identical with the corresponding sequence of LipA and LipB of P. aeruginosa LST-03 and P. aeruginosa PA01, but it has less identity with Pseudomonas cepacia (Burkholderia cepacia) as it showed only 37.6% and 23.3% identity with the B. cepacia LipA and LipB sequence, respectively. The molecular mass of the recombinant lipase was found to be 48 kDa. The recombinant lipase exhibited optimal activity at pH 8.0 and 37°C, though it was active between pH 5.0 and pH 9.0 and up to 45°C. K _m and V _max values for recombinant P. aeruginosa lipase were found to be 151.5 ± 29 μM and 217 ± 22.5 μmol min⁻¹ mg⁻¹ protein, respectively.     

Gene analysis,optimized production and property of marine lipase from <Emphasis Type="Italic">Bacillus pumilus</Emphasis> B106 associated with South China Sea sponge <Emphasis Type="Italic">Halichondria rugosa</Emphasis>

Gene cloning, optimized production and property of marine lipase from Bacillus pumilus B106 associated with South China Sea sponge Halichondria rugosa were investigated in this paper. A lipase gene with whole ORF encoding 215 amino acids was obtained by PCR, protein domain prediction suggested that the deduced lipase belongs to α/β hydrolases family. Based on single factor Seriatim-Factorial test and Plackett–Burman experimental design, the optimal medium consisted of (per l) 12.5 ml maize oil, 5.0 g beef extract, 2.0 g PO₄ ³⁻ (0.6 g KH₂PO₄, 1.4 g K₂HPO₄), 17.15 g Mg²⁺, 5.0 g yeast extract, 2.282 g CaCl₂ and 5.0 ml Tween80 with artificial sea water. Using this optimum medium, lipase activity and cell concentration were increased by 3.54- and 1.31-fold over that of the basal medium, respectively. This lipase showed tolerance to high salinity, pH and temperature. About 10–20% methanol exhibited a stimulatory effect on the lipase activity, while activity was inhibited by 30–40% methanol, 2-propanol, DMSO, and ethanol. This study provides a valuable resource for marine lipase production and extends our understanding of the possible role of sponge-associated bacteria in the biotransformation of chemical compounds for the sponge host.     

Production of transgenic gentian plants by particle bombardment of suspension-culture cells

 Cell suspension cultures were established from leaf explants of gentian (Gentiana triflora×G. scabra) for the generation of transgenic plants by particle bombardment. The parameters for the bombardment of suspension culture cells with a particle gun were examined by monitoring the transient expression of a gene for β-glucuronidase driven by the cauliflower mosaic virus (CaMV) 35S promoter. We found that prior culture of suspension culture cells for 5 days on solid medium was optimum for successful particle bombardment. Putative transformed calli were obtained from bombarded cells after a two-step selection procedure. Cells were cultured first with 30 mg l^–1 hygromycin in liquid MS medium that contained 10 mg l^–1 N-phenyl-N′-1,2,3-thiadiazol-5-yl urea, 1 mg/l 1-naphthaleneacetic acid and 30 g l^–1 sucrose and then on solid medium prepared from the same liquid medium plus 2 g l^–1 gellan gum. After 12 weeks of selection on solid medium that contained 30 mg l^–1 hygromycin, two transgenic gentian plants were regenerated from each selected callus. Analysis by the polymerase chain reaction and Southern blotting revealed the stable integration of transferred DNA. Received: 3 June 1999 / Revision received: 21 September 1999 / Accepted: 20 September 1999     

Differential behaviour of Pseudomonas sp. 42A2 LipC,a lipase showing greater versatility than its counterpart LipA

Growth of Pseudomonas sp. 42A2 on oleic acid releases polymerized hydroxy-fatty acids as a result of several enzymatic conversions that could involve one or more lipases. To test this hypothesis, the lipolytic system of strain Pseudomonas sp. 42A2 was analyzed, revealing the presence of at least an intracellular carboxylesterase and a secreted lipase. Consensus primers derived from a conserved region of bacterial lipase subfamilies I.1 and I.2 allowed isolation of two secreted lipase genes, lipA and lipC, highly homologous to those of Pseudomonas aeruginosa PAO1. Homologous cloning of the isolated lipA and lipC genes was performed in Pseudomonas sp. 42A2 for LipA and LipC over-expression. The overproduced lipases were further purified and characterized, both showing preference for medium fatty acid chain-length substrates. However, significant differences could be detected between LipA and LipC in terms of enzyme kinetics and behaviour pattern. Accordingly, LipA showed maximum activity at moderate temperatures, and displayed a typical Michaelis–Menten kinetics. On the contrary, LipC was more active at low temperatures and displayed partial interfacial activation, showing a shift in substrate specificity when assayed at different temperatures, and displaying increased activity in the presence of certain heavy metal ions. The versatile properties shown by LipC suggest that this lipase could be expressed in response to variable environmental conditions.     

Cloning,characterization and expression of the extracellular lipase gene from <Emphasis Type="Italic">Aureobasidium </Emphasis><Emphasis Type="Italic">pullulans</Emphasis> HN2-3 isolated from sea saltern

The extracellular lipase structural gene was isolated from cDNA of Aureobasidium pullulans HN2-3 by using SMART^TM RACE cDNA amplification kit. The gene had an open reading frame of 1245 bp long encoding a lipase. The coding region of the gene was interrupted by only one intron (55 bp). It encodes 414 amino acid residues of a protein with a putative signal peptide of 26 amino acids. The protein sequence deduced from the extracellular lipase structural gene contained the lipase consensus sequence (G-X-S-X-G) and three conserved putative N-glycosylation sites. According to the phylogenetic tree of the lipases, the lipase from A. pullulans was closely related to that from Aspergillus fumigatus (XP_750543) and Neosartorya fischeri (XP_001257768) and the identities were 50% and 52%, respectively. The mature peptide encoding cDNA was subcloned into pET-24a (+) expression vector. The recombinant plasmid was expressed in Escherichia coli BL21(DE3). The expressed fusion protein was analyzed by SDS-PAGE and western blotting and a specific band with molecular mass of about 47 kDa was found. Enzyme activity assay verified the recombinant protein as a lipase. A maximum activity of 0.96 U/mg was obtained from cellular extract of E. coli BL21(DE3) harboring pET-24a(+)LIP1. Optimal pH and temperature of the crude recombinant lipase were 8.0 and 35 °C, respectively and the crude recombinant lipase had the highest hydrolytic activity towards peanut oil.     

Cloning,characterization, expression,and copper sensitivity of the metallothionein-1 gene in the Chinese mitten crab, <Emphasis Type="Italic">Eriocheir sinensis</Emphasis>

A full-length metallothionein-1(MT-1) cDNA was cloned from the Chinese mitten crab, Eriocheir sinensis, based upon the hepatopancreas cDNA library. The full-length cDNA contained a single 180 bp open reading frame that encoded a 59 amino acid protein. The deduced amino acid sequence was cysteine (Cys)-rich, with residues observed in patterns characteristic of other reported MTs: Cys–X–Cys, Cys–X–X–Cys, or Cys–X–X–X–Cys. Gene structure obtained via PCR yielded a 3816 bp gene, which was comprised of three exons and two introns arranged in a “3 + 2” pattern. The cloned 5′flanking region (1,735 bp) contained several predicted binding sites, which included MREs, AP-1, SP1, USF, GATA, HNF-1, and HSF. MT-1 mRNA expression analysis revealed that while levels were highest in the hepatopancreas, expression was abundant in testis and thoracic ganglia, moderate in intestine (P < 0.05), and weak in other tissues (P < 0.05). MT-1 mRNA expression exhibited reproductive variation in the male, with levels approximately tenfold greater in August, during seasonal gonadal maturation, compared to other times of the year. Cu²⁺ exposure via tank water (0–1 mg/l for 7 days) resulted in a dose-dependent bell curve response in MT-1 mRNA expression, with peak expression observed after exposure to 0.1 mg/l Cu²⁺. A time course experiment (0.1 mg/l Cu²⁺ over 9 days) revealed MT-1 mRNA expression peaked sharply on day 5 before gradually decreasing with prolonged exposure. In the present report, we provide sequence analysis of the first MT-1 gene cloned in E. sinensis, and evidence that its physiological and toxicological regulation is evolutionary conserved.     

A novel biocatalytic approach to acetylation of 1-β-<Emphasis Type="SmallCaps">d</Emphasis>-arabinofuranosylcytosine by <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> whole cell in organic solvents

Biocatalytic acylation of 1-β-d-arabinofuranosylcytosine (ara-C) was developed using whole cell of Aspergillus oryzae as a novel catalyst. ¹³C nuclear magnetic resonance (NMR) analysis indicated that the whole-cell biocatalyst had more specific activity toward the 3′-hydroxyl group than 5′-hydroxyl group among the available hydroxyl groups in sugar moiety of ara-C. Except for glucose and maltose, 11 carbon sources supplemented to basal media, including Spans, Tweens, olive oil and oleic acid, exhibited notable enhancement effects on both the cell growth and the acylation reactions. It was suggested that the carbon sources containing controlled-release oleic acid were the important substrates for the production of fungal cell-bound lipase with specific activity, partially due to a gradual induction effect of their released oleic acid on the cell-bound lipase production. Despite the low initial reaction rate and substrate conversion, the addition of 2.0 g/l Span 80 resulted in a higher 3′-regioselectivity of the cells than 81%. By using Tween 85 at its optimum concentration of 5.0 g/l, however, the highest initial rates (3.2 mmol/l h) and substrate conversion (76%) of the whole-cell catalyzed acylation of ara-C can be achieved. It was also found that the 3′-regioselectivity of the cells showed observable increase by extending the culture time. And the activity of cell-bound lipase drastically increased in the early stage of cell growth and then declined in the late culture stage, whatever the culture media used. Our results thus indicated that A. oryzae whole cell was a promising green tool for biosynthesis of nucleoside esters with potential bioactivities.