Fluorescence studies of phosphoribulokinase, a light-regulated, chloroplastic enzyme

Recent characterization of spinach phosphoribulokinase has revealed that the homodimeric molecule contains only two tryptophans per 44-kDa subunit. We have performed steady-state and frequency domain studies of the intrinsic fluorescence of this protein. The fluorescence properties reflect contributions from both types of tryptophan residues. One of these appears to be relatively exposed to solvent and the quencher, acrylamide; fluoresce with a lambda max of 345 nm; decay with a fluorescence lifetime of 6.3 ns; have a relatively red-shifted absorption spectrum; and have a certain degree of independent motional freedom, with respect to the protein. The other tryptophan residue appears to be more buried; fluoresce with lambda max of 325 nm; have a lifetime of 1.7 ns; have a relatively blue-shifted absorption spectrum; and not to enjoy independent motional freedom. On comparison of phase-resolved spectral data and solute quenching data, we suggest that resonance energy transfer between the blue and red tryptophan residues may occur. We also describe the strategy of simultaneously fitting Stern-Volmer quenching data collected at two emission wavelengths.     

Prediction of protein mutant stability using classification and regression tool

Prediction of protein stability upon amino acid substitutions is an important problem in molecular biology and the solving of which would help for designing stable mutants. In this work, we have analyzed the stability of protein mutants using two different datasets of 1396 and 2204 mutants obtained from ProTherm database, respectively for free energy change due to thermal (DeltaDeltaG) and denaturant denaturations (DeltaDeltaG(H(2)O)). We have used a set of 48 physical, chemical energetic and conformational properties of amino acid residues and computed the difference of amino acid properties for each mutant in both sets of data. These differences in amino acid properties have been related to protein stability (DeltaDeltaG and DeltaDeltaG(H(2)O)) and are used to train with classification and regression tool for predicting the stability of protein mutants. Further, we have tested the method with 4 fold, 5 fold and 10 fold cross validation procedures. We found that the physical properties, shape and flexibility are important determinants of protein stability. The classification of mutants based on secondary structure (helix, strand, turn and coil) and solvent accessibility (buried, partially buried, partially exposed and exposed) distinguished the stabilizing/destabilizing mutants at an average accuracy of 81% and 80%, respectively for DeltaDeltaG and DeltaDeltaG(H(2)O). The correlation between the experimental and predicted stability change is 0.61 for DeltaDeltaG and 0.44 for DeltaDeltaG(H(2)O). Further, the free energy change due to the replacement of amino acid residue has been predicted within an average error of 1.08 kcal/mol and 1.37 kcal/mol for thermal and chemical denaturation, respectively. The relative importance of secondary structure and solvent accessibility, and the influence of the dataset on prediction of protein mutant stability have been discussed.     

Context-dependent protein stabilization by methionine-to-leucine substitution shown in T4 lysozyme.

The substitution of methionines with leucines within the interior of a protein is expected to increase stability both because of a more favorable solvent transfer term as well as the reduced entropic cost of holding a leucine side chain in a defined position. Together, these two terms are expected to contribute about 1.4 kcal/mol to protein stability for each Met --> Leu substitution when fully buried. At the same time, this expected beneficial effect may be offset by steric factors due to differences in the shape of leucine and methionine. To investigate the interplay between these factors, all methionines in T4 lysozyme except at the amino-terminus were individually replaced with leucine. Of these mutants, M106L and M120L have stabilities 0.5 kcal/mol higher than wild-type T4 lysozyme, while M6L is significantly destabilized (-2.8 kcal/mol). M102L, described previously, is also destabilized (-0.9 kcal/mol). Based on this limited sample it appears that methionine-to-leucine substitutions can increase protein stability but only in a situation where the methionine side chain is fully or partially buried, yet allows the introduction of the leucine without concomitant steric interference. The variants, together with methionine-to-lysine substitutions at the same sites, follow the general pattern that substitutions at rigid, internal sites tend to be most destabilizing, whereas replacements at more solvent-exposed sites are better tolerated.     

Contribution of single tryptophan residues to the fluorescence and stability of ribonuclease Sa

Ribonuclease Sa (RNase Sa) contains no tryptophan (Trp) residues. We have added single Trp residues to RNase Sa at sites where Trp is found in four other microbial ribonucleases, yielding the following variants of RNase Sa: Y52W, Y55W, T76W, and Y81W. We have determined crystal structures of T76W and Y81W at 1.1 and 1.0 A resolution, respectively. We have studied the fluorescence properties and stabilities of the four variants and compared them to wild-type RNase Sa and the other ribonucleases on which they were based. Our results should help others in selecting sites for adding Trp residues to proteins. The most interesting findings are: 1), Y52W is 2.9 kcal/mol less stable than RNase Sa and the fluorescence intensity emission maximum is blue-shifted to 309 nm. Only a Trp in azurin is blue-shifted to a greater extent (308 nm). This blue shift is considerably greater than observed for Trp71 in barnase, the Trp on which Y52W is based. 2), Y55W is 2.1 kcal/mol less stable than RNase Sa and the tryptophan fluorescence is almost completely quenched. In contrast, Trp59 in RNase T1, on which Y55W is based, has a 10-fold greater fluorescence emission intensity. 3), T76W is 0.7 kcal/mol more stable than RNase Sa, indicating that the Trp side chain has more favorable interactions with the protein than the threonine side chain. The fluorescence properties of folded Y76W are similar to those of the unfolded protein, showing that the tryptophan side chain in the folded protein is largely exposed to solvent. This is confirmed by the crystal structure of the T76W which shows that the side chain of the Trp is only approximately 7% buried. 4), Y81W is 0.4 kcal/mol less stable than RNase Sa. Based on the crystal structure of Y81W, the side chain of the Trp is 87% buried. Although all of the Trp side chains in the variants contribute to the unusual positive circular dichroism band observed near 235 nm for RNase Sa, the contribution is greatest for Y81W.     

Destabilizing effect of proline substitutions in two helical regions of T4 lysozyme: leucine 66 to proline and leucine 91 to proline.

A class of temperature-sensitive (ts) mutants of T4 lysozyme with reduced activity at 30 degrees C and no activity at 43 degrees C has been selected. These mutants, designated "tight" ts mutants, differ from most other T4 lysozyme mutants that are active at 43 degrees C, but only manifest their ts lesion by a reduced halo size around phage plaques after exposure of the growth plates to chloroform vapors. For example, in the series of T4 lysozyme mutants at position 157, the original randomly selected mutant, T1571, is the least stable of the series, yet, apart from the halo assay and subsequent in vitro protein stability measurements, this mutant is indistinguishable from wild type (WT) even at 43 degrees C. Two mutants were identified: L91P and L66P. Both insert proline residues into alpha-helical regions of the WT protein structure. The stabilities (delta delta G) as determined by urea denaturation are 8.2 kcal/mol for L91P and 7.1 kcal/mol for L66P. CD spectra indicate that no major conformational changes have occurred in the mutant structures. The structures of the mutants were modeled with a 40-ps molecular dynamics simulation using explicit solvent. For L91P, the reduction of stability appears to be due to an unsatisfied hydrogen bond in the alpha-helix and to a new buried cavity. For L66P, the reduction of stability appears to be due to a disruption of the interdomain alpha-helix, at least two unsatisfied hydrogen bonds, and a newly formed solvent-filled pocket that protrudes into the hydrophobic core, possibly reducing the stabilizing contribution of a partially buried intrachain salt bridge.     

Optical spectroscopic characterization of single tryptophan mutants of chicken skeletal troponin C: evidence for interdomain interaction.

The effects of metal ion binding on the optical spectroscopic properties and temperature stability of two single tryptophan mutants of chicken skeletal TnC, F78W and F154W, have been examined. The absence of tyrosine and other tryptophan residues allowed the unambiguous assignment of the spectral signal from the introduced Trp residue. Changes in the molar ellipticity values in the far-UV CD spectra of the mutant proteins on metal ion binding were similar to those of wild-type TnC suggesting that the introduction of the Trp residue had no effect on the total secondary structure content. The fluorescence and near-UV absorbance data reveal that, in the apo state, Trp-78 is buried while Trp-154 is exposed to solvent. Additionally, the highly resolved (1)L(b) band of Trp-78 seen in the near-UV absorbance and CD spectra of the apo state of F78W suggest that this residue is likely in a rigid molecular environment. In the calcium-saturated state, Trp-154 becomes buried while the solvent accessibility of Trp-78 increases. The fluorescence emission and near-UV CD of Trp-78 in the N-terminal domain were sensitive to calcium binding at the C-terminal domain sites. Measurements of the temperature stability reveal that events occurring in the N-terminal domain affect the stability of the C-terminal domain and vice versa. This, coupled with the titration data, strongly suggests that there are interactions between the N- and C-terminal domains of TnC.     

Structural and thermodynamic analysis of the packing of two alpha-helices in bacteriophage T4 lysozyme

Packing interactions in bacteriophage T4 lysozyme were explored by determining the structural and thermodynamic effects of substitutions for Ala98 and neighboring residues. Ala98 is buried in the core of T4 lysozyme in the interface between two alpha-helices. The Ala98 to Val (A98V) replacement is a temperature-sensitive lesion that lowers the denaturation temperature of the protein by 15 degrees C (pH 3.0, delta delta G = -4.9 kcal/mol) and causes atoms within the two helices to move apart by up to 0.7 A. Additional structural shifts also occur throughout the C-terminal domain. In an attempt to compensate for the A98V replacement, substitutions were made for Val149 and Thr152, which make contact with residue 98. Site-directed mutagenesis was used to construct the multiple mutants A98V/T152S, A98V/V149C/T152S and the control mutants T152S, V149C and A98V/V149I/T152S. These proteins were crystallized, and their high-resolution X-ray crystal structures were determined. None of the second-site substitutions completely alleviates the destabilization or the structural changes caused by A98V. The changes in stability caused by the different mutations are not additive, reflecting both direct interactions between the sites and structural differences among the mutants. As an example, when Thr152 in wild-type lysozyme is replaced with serine, the protein is destabilized by 2.6 kcal/mol. Except for a small movement of Val94 toward the cavity created by removal of the methyl group, the structure of the T152S mutant is very similar to wild-type T4 lysozyme. In contrast, the same Thr152 to Ser replacement in the A98V background causes almost no change in stability. Although the structure of A98V/T152S remains similar to A98V, the combination of T152S with A98V allows relaxation of some of the strain introduced by the Ala98 to Val replacement. These studies show that removal of methyl groups by mutation can be stabilizing (Val98----Ala), neutral (Thr152----Ser in A98V) or destabilizing (Val149----Cys, Thr152----Ser). Such diverse thermodynamic effects are not accounted for by changes in buried surface area or free energies of transfer of wild-type and mutant side-chains. In general, the changes in protein stability caused by a mutation depend not only on changes in the free energy of transfer associated with the substitution, but also on the structural context within which the mutation occurs and on the ability of the surrounding structure to relax in response to the substitution.(ABSTRACT TRUNCATED AT 400 WORDS)     

Green fluorescent protein variants as ratiometric dual emission pH sensors. 3. Temperature dependence of proton transfer

In parts 1 and 2 of this series [Hanson, G. T., McAnaney, T. B., Park, E. S., Rendell, M. E. P., Yarbrough, D. K., Chu, S. Y., Xi, L. X., Boxer, S. G., Montrose, M. H., and Remington, S. J. (2002) Biochemistry 41, 15477-15488; McAnaney, T. B., Park, E. S., Hanson, G. T., Remington, S. J., and Boxer, S. G. (2002) Biochemistry 41, 15489-15494], we described the structure, excited-state dynamics, and applications of pH-sensitive, ratiometric dual emission green fluorescent protein (deGFP) variants with fluorescence emission that is modulated between blue (lambda(max) approximately equal 465 nm) and green (lambda(max) approximately equal 515 nm) depending on the pH of the bulk solvent. In this paper, we consider the energetic origin of the dual emission properties of these GFP variants by examining the temperature dependence of the steady-state absorption and fluorescence emission. In most cases, the quantum yield of the green emission decreased as the temperature was lowered, indicating that the excited-state proton transfer (ESPT) which produces the green emitting form is an activated process. The activation energies of ESPT, determined by modeling the quantum yields of both blue and green emissions between 260 and 298 K in the context of a simple photocycle, were found to be larger at low pH than at high pH. These results indicate that the ratiometric dual emission properties of deGFP mutants are due to this pH-sensitive ESPT rate, combined with a modulation of the ground-state neutral and anionic chromophore populations with pH. The time-resolved fluorescence of one of the deGFP mutants was studied in detail. The time-resolved emission spectra of this mutant are the first ultrafast spectra obtained for a GFP. These spectra demonstrate that the rising kinetics for green emission, considered a hallmark of ESPT, is the sum of the contribution from both the neutral and intermediate anionic forms of the chromophore at the probe wavelength and may not be observed in all mutants that undergo ESPT, depending on the relative contributions of the two forms.     

Biophysical analysis of phaseolin denaturation induced by urea, guanidinium chloride, pH, and temperature.

The structural stability of phaseolin was determined by using absorbance, circular dichroism (CD), fluorescence emission, and fluorescence polarization anisotropy to monitor denaturation induced by urea, guanidinium chloride (GdmCl),pH changes, increasing temperature, or a combination thereof. Initial results indicated that phaseolin remained folded to a similar extent in the presence or absence of 6.0 M urea or GdmCl at room temperature. In 6.0 M GdmCl, phaseolin denatures at approximately 65°C when probed with absorbance, CD, and fluorescence polarization anisotropy. The transition occurs at lower temperatures by decreasingpH. Kinetic measurements of denaturation using CD indicated that the denaturation is slow below 55°C and is associated with an activation energy of 52 kcal/mol in 6.0 M GdmCl. In addition, kinetic measurement using fluorescence emission indicated that the single tryptophan residue was sensitive to at least two steps of the denaturation process. The fluorescence emission appeared to reflect some other structural perturbation than protein denaturation, as fluorescence inflection occurred approximately 5°C prior to the changes observed in absorbance, CD, and fluorescence polarization anisotropy.     

Biophysical analysis of phaseolin denaturation induced by urea,guanidinium chloride,pH, and temperature

The structural stability of phaseolin was determined by using absorbance, circular dichroism (CD), fluorescence emission, and fluorescence polarization anisotropy to monitor denaturation induced by urea, guanidinium chloride (GdmCl),pH changes, increasing temperature, or a combination thereof. Initial results indicated that phaseolin remained folded to a similar extent in the presence or absence of 6.0 M urea or GdmCl at room temperature. In 6.0 M GdmCl, phaseolin denatures at approximately 65°C when probed with absorbance, CD, and fluorescence polarization anisotropy. The transition occurs at lower temperatures by decreasingpH. Kinetic measurements of denaturation using CD indicated that the denaturation is slow below 55°C and is associated with an activation energy of 52 kcal/mol in 6.0 M GdmCl. In addition, kinetic measurement using fluorescence emission indicated that the single tryptophan residue was sensitive to at least two steps of the denaturation process. The fluorescence emission appeared to reflect some other structural perturbation than protein denaturation, as fluorescence inflection occurred approximately 5°C prior to the changes observed in absorbance, CD, and fluorescence polarization anisotropy.     

Biophysical characterization of the cocaine binding pocket in the serotonin transporter using a fluorescent cocaine analogue as a molecular reporter

To explore the biophysical properties of the binding site for cocaine and related compounds in the serotonin transporter SERT, a high affinity cocaine analogue (3beta-(4-methylphenyl)tropane-2beta-carboxylic acid N-(N-methyl-N-(4-nitrobenzo-2-oxa-1,3-diazol-7-yl)ethanolamine ester hydrochloride (RTI-233); K(I) = 14 nm) that contained the environmentally sensitive fluorescent moiety 7-nitrobenzo-2-oxa-1,3-diazole (NBD) was synthesized. Specific binding of RTI-233 to the rat serotonin transporter, purified from Sf-9 insect cells, was demonstrated by the competitive inhibition of fluorescence using excess serotonin, citalopram, or RTI-55 (2beta-carbomethoxy-3beta-(4-iodophenyl)tropane). Moreover, specific binding was evidenced by measurement of steady-state fluorescence anisotropy, showing constrained mobility of bound RTI-233 relative to RTI-233 free in solution. The fluorescence of bound RTI-233 displayed an emission maximum (lambda(max)) of 532 nm, corresponding to a 4-nm blue shift as compared with the lambda(max) of RTI-233 in aqueous solution and corresponding to the lambda(max) of RTI-233 in 80% dioxane. Collisional quenching experiments revealed that the aqueous quencher potassium iodide was able to quench the fluorescence of RTI-233 in the binding pocket (K(SV =) 1.7 m(-)(1)), although not to the same extent as free RTI-233 (K(SV =) 7.2 m(-)(1)). Conversely, the hydrophobic quencher 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO) quenched the fluorescence of bound RTI-233 more efficiently than free RTI-233. These data are consistent with a highly hydrophobic microenvironment in the binding pocket for cocaine-like uptake inhibitors. However, in contrast to what has been observed for small-molecule binding sites in, for example, G protein-coupled receptors, the bound cocaine analogue was still accessible for aqueous quenching and, thus, partially exposed to solvent.     

Sequence based residue depth prediction using evolutionary information and predicted secondary structure

Background  

Residue depth allows determining how deeply a given residue is buried, in contrast to the solvent accessibility that differentiates between buried and solvent-exposed residues. When compared with the solvent accessibility, the depth allows studying deep-level structures and functional sites, and formation of the protein folding nucleus. Accurate prediction of residue depth would provide valuable information for fold recognition, prediction of functional sites, and protein design.     

Structure and dynamics of staphylococcal nuclease mutants as studied by fluorescence quenching techniques

Fluorescence techniques have been used to investigate the effect of mutations on the structure and dynamics of staphylococcal nuclease. An estimate of the accessibility to acrylamide of the enzyme's single tryptophan residue (Trp140) was obtained from the Stern-Volmer constant for fluorescence quenching. This was indicative of a partially buried tryptophan in the wild-type nuclease. Five single-site mutant nucleases (H124L, V66L, G88V, G79S and F76V) and one double mutant (V66L + G88V), with widely differing stabilities to denaturants, gave Stern-Volmer constants which were very similar to that of their parent enzyme. Studies of the temperature- and viscosity-dependence of quenching suggest that access by acrylamide to Trp140 is limited by diffusion rather than by protein structural fluctuations. Lifetime-resolved fluorescence anisotropy studies using steady-state instrumentation suggest that there is very little segmental motion of the Trp140; most of the anisotropy therefore decays due to protein rotation in the solution. Rotational correlation times for several nuclease mutants have been determined and these are very similar to that of the native nuclease. Thus it appears that these substitutions in the primary amino acid sequence, which have significant effects on the stability of the folded proteins, do not cause a significant change in the protein structure or dynamics around Trp140.     

Lipid binding of the exchangeable apolipoprotein apolipophorin III induces major changes in fluorescence properties of tryptophans 115 and 130

The effect of lipid association on the local environment of the two tryptophan residues of Locusta migratoria apolipophorin III (apoLp-III) has been studied. In the lipid-free state, Trp115 in helix 4 is buried in the hydrophobic interior of the helix bundle, while Trp130 is located in a loop connecting helices 4 and 5. Fluorescence spectroscopy of single Trp mutants revealed an emission maximum (lambda(max)) of 321 nm for apoLp-III-W@115 (excitation 280 nm) which red-shifted to 327 nm upon binding to dimyristoylphosphatidylcholine (DMPC). ApoLp-III-W@130 displayed a lambda(max) of 338 nm while interaction with DMPC resulted in a blue shift to 331 nm. Quenching studies with KI and acrylamide revealed decreased accessibility to Trp115 compared to Trp130, while lipid binding induced a decrease in quenching of Trp130. Aromatic circular dichroism (CD) spectra showed that Trp vibronic transitions at 278, 286, and 294 nm for lipid-free apoLp-III were caused by Trp115. Upon lipid association, aromatic extrema are reversed in sign, becoming entirely negative with both Trp residues contributing to the vibronic transitions, implying restriction in side-chain mobility of these residues. Thus, lambda(max), quencher accessibility, and aromatic CD analysis indicate that Trp115 is much less solvent-exposed than Trp130. Differences in fluorescence properties of these residues are minimized in the lipid-bound state, a result of relocation of Trp115 and Trp130 into the lipid milieu. Thus, in addition to the hydrophobic faces of apoLp-III amphipathic alpha-helices, the loop region containing Trp130 comes in close contact with DMPC.     

Intrinsic tryptophan fluorescence identifies specific conformational changes at the actomyosin interface upon actin binding and ADP release.

The helix-loop-helix (A-site) and myopathy loop (R-site) are located on opposite sides of the cleft that separates the proposed actin-binding interface of myosin. To investigate the structural features of the A- and R-sites, we engineered two mutants of the smooth muscle myosin motor domain with the essential light chain (MDE), containing a single tryptophan located either in the A-site (W546-MDE) or in the R-site (V413W MDE). W546- and V413W-MDE display actin-activated ATPase and actin-binding properties similar to those of wild-type MDE. The steady-state fluorescence properties of W546-MDE [emission peak (lambda(max)) = 344, quantum yield = 0.20, and acrylamide bimolecular quenching constant (k(q)) = 6.4 M(-)(1). ns(-)(1)] and V413W-MDE [lambda(max) = 338, quantum yield = 0.27, and k(q) = 3.6 M(-)(1).ns(-)(1)] demonstrate that Trp-546 and Trp-413 are nearly fully exposed to solvent, in agreement with the crystallographic data on these residues. In the presence of actin, Trp-546 shifts to a more buried environment in both the ADP-bound and nucleotide-free (rigor) actomyosin complexes, as indicated by an average lambda(max) of 337 or 336 nm, respectively, and protection from dimethyl(2-hydroxy-5-nitrobenzyl)sulfonium bromide (DHNBS) oxidation. In contrast, Trp-413 has a single conformation with an average lambda(max) of 338 nm in the ADP-bound complex, but in the rigor complex it is 50% more accessible to DHNBS oxidation and can adopt a range of possible conformations (lambda(max) = 341-347 nm). Our results suggest a structural model in which the A-site remains tightly bound to actin and the R-site adopts a more flexible and solvent-exposed conformation upon ADP release.     

Tryptophan fluorescence monitors structural changes accompanying signalling state formation in the photocycle of photoactive yellow protein.

Photoactive yellow protein, a small, water-soluble blue-light absorbing photoreceptor protein from Ectothiorhodospira(Halorhodospira)[space]halophila has a structure with two hydrophobic cores, of which the main one houses its light-sensitive chromophore (p-coumaric acid), separated by a central [small beta]-sheet. This photoreceptor protein contains a single tryptophan residue (W119) that is situated at the interface between the central beta-sheet and its N-terminal cap. The fluorescence properties of W119 in the dark state pG (lambda(max)= 328 nm; Phi(fl)= 0.01; nearly pH-independent) are typical for a buried tryptophan in a hydrophobic environment with significant quenching by nearby amino acid residues. Signalling state formation leads to pH-dependent fluorescence changes: At pH values <6.5 the fluorescence emission increases, with a minor blue shift of the emission maximum. Above this pH, the emission maximum of the tryptophan shifts considerably to the red, whereas its total intensity decreases. These results further support the contention that signalling state formation in PYP leads to significant changes in the structure of this protein, even at sites that are at a considerable distance from the chromophore. The nature of these changes in pB, however, depend upon the pH imposed upon the protein: At slightly alkaline pH, which presumably is closest to the pH to which this protein is exposed in vivo, these changes lead to an exposure of the part of the central beta-sheet harbouring W119. At slightly acidic pH the polarity of the environment of W119 is hardly affected by the formation of the signalling state but the quenching of its fluorescence emission, possibly by nearby amino acids, is reduced. On the other hand, its accessibility for quenching by small molecules in the solution is enhanced at acidic and alkaline pH in the signalling state (pB) compared to the dark state (pG). This latter observation points towards a more flexible structure of the N-terminal cap, having a looser interaction with the central beta-sheet in pB.     

Fluorescence quenching of the buried tryptophan residue of cod parvalbumin

Cod parvalbumin (isotype III) is a single tryptophan-containing protein. The fluorescence characteristics of this tryptophan residue (lambda em approximately 315 nm) suggest that it is buried from solvent and that it is located in an apolar core of the protein. Solute quenching studies of the tryptophan fluorescence of parvalbumin reveal dynamic quenching rate constants, kq, of 1.1 X 10(8) and 2.3 X 10(9) M-1 s-1 (at 25 degrees C) with acrylamide and oxygen, respectively, as quenchers. From temperature dependence studies, activation energies of 6.5 +/- 1.5 and 6.0 +/- 0.5 kcal/mol are found for acrylamide and oxygen quenching. The kq for acrylamide quenching is found to be relatively unchanged (+/- 10%) by an 8-fold increase in the bulk viscosity (glycerol/water mixture). These temperature and viscosity studies argue that the acrylamide quenching process involves a dynamic penetration of the quencher, facilitated by fluctuations in the protein's structure.     

Fluorescence studies of the conformational dynamics of parvalbumin in solution: lifetime and rotational motions of the single tryptophan residue

The fluorescence properties of the single tryptophan residue in whiting parvalbumin were used to probe the dynamics of the protein matrix. Ca2+ binding caused a blue-shift in the emission (from lambda max = 339 to 315 nm) and a 2.5-fold increase in quantum yield. The fluorescence decay was nonexponential in both Ca2(+)-free and Ca2(+)-bound parvalbumin and was best described by Lorentzian lifetime distributions centered around two components: a major long-lived component at 2-5 ns and a small subnanosecond component. Raising the temperature from 8 to 45 degrees C resulted in a decrease in both the center (average) and width (dispersion) of the major lifetime distribution component, whereas the center, width, and fractional intensity of the fast component increased with temperature. Arrhenius activation energies of 1.3 and 0.3 kcal/mol were obtained in the absence and in the presence of Ca2+, respectively, from the temperature dependence of the center of the major lifetime distribution component. Direct anisotropy decay measurements of local tryptophan rotations yielded an activation energy of 2.3 kcal/mol in Ca2(+)-depleted parvalbumin and indicated a correlation between rotational rates and lifetime distribution parameters (center and width). Ca2+ binding produced a decrease in the width of the major lifetime distribution component and a decrease in tryptophan rotational mobility within the protein. There was a rough correlation between these two parameters with changes in Ca2+ and temperature, so that both measurements may be taken to indicate that the structure of Ca2(+)-bound parvalbumin was more rigid than in Ca2(+)-depleted parvalbumin.     

Frequency-domain fluorescence studies of an extracellular metalloproteinase of Staphylococcus aureus

A frequency-domain fluorescence study of calcium-binding metalloproteinase from Staphylococcus aureus has shown that this two-tryptophan-containing protein exhibits a double-exponential fluorescence decay. At 10 degrees C in 0.05 M Tris-HCl buffer (pH 9.0) containing 10 mM CaCl2, fluorescence lifetimes of 1.2 and 5.1 ns are observed. Steady-state and frequency-domain solute-quenching studies are consistent with the assignment of the two lifetimes to the two tryptophan residues. The tryptophan residue characterized by a shorter lifetime has a maximum of fluorescence emission at about 317 nm and the second one exhibits a maximum of its emission at 350 nm. These two residues contribute almost equally to the protein's fluorescence. These results, as well as fluorescence-quenching studies using KI and acrylamide as a quencher, indicate that in calcium-loaded metalloproteinase, the tryptophan residue characterized by the shorter lifetime is extensively buried within the protein. The second residue is exposed on the surface of the protein. The tryptophan residues of metalloproteinase have acrylamide dynamic-quenching rate constants, kq values, of 2.3 and 0.26 X 10(9) M-1 X s-1 for the exposed and buried residue, respectively. A study of the temperature dependence of the fluorescence lifetime for the two tryptophan components gives activation energies, Ea values, for thermal quenching of 1.8 and 2.2 kcal/mol for the buried and the exposed residue, respectively. Dissociation of Ca2+ from the protein causes a change in the protein's structure, as can be judged from dramatic changes which occur in the fluorescence properties of the buried tryptophan residue. These changes include an approx. 13 nm red-shift in the maximum of the fluorescence emission and an increase in the acrylamide-quenching rate constant, and they indicate that the removal of Ca2+ results in an increase in the exposure and the polarity of the microenvironment of this 'blue' residue.     

Conformation and dynamics of bovine brain S-100a protein determined by fluorescence spectroscopy.

We have used time-resolved laser fluorescence spectroscopy to investigate the intensity and anisotropy decays of the single tryptophan residue in bovine brain S-100a (alpha beta) protein. The steady-state and acrylamide quenching results indicated that the Trp 90 of the alpha-subunit was partially buried in a relatively nonpolar environment at pH 7.5. Both Ca2+ and pH 8.5 slightly enhanced the exposure of the residue to the solvent, but the residue remained partially buried in the calcium complex at both pH values. The best representation of the intensity decays was a linear combination of three exponential terms, regardless of solvent condition and temperature. The three lifetimes (tau i) were in the range of 0.4-5 ns and insensitive to emission wavelength, but their fractional amplitudes (alpha i) shifted in favor of the shortest component (alpha 1) when the decays were measured at the blue end of the emission spectrum. These results suggest that an excited-state interaction between the indole ring and the side chain of an adjacent residue may be responsible for the observed shortest lifetime. In the presence of Ca2+, the three lifetimes remained relatively unaltered, but the values of alpha 1 decreased by a factor of 2.3 at pH 7.2 and a factor of 1.8 at pH 8.2. This Ca(2+)-induced decrease may be attributed to disruption of the putative excited-state interaction resulting from reorientations of the alpha-helical segments flanking a Ca(2+)-binding loop (residues 62-73). At both pH 7.2 and 8.4, the anisotropy decays of the apoprotein followed a biexponential decay law.(ABSTRACT TRUNCATED AT 250 WORDS)