Molecular architecture of the neurofilament. I. Subunit arrangement of neurofilament L protein in the intermediate-sized filament

Using the smallest subunit (NF-L) of a neurofilament and a glial fibrillary acidic protein, the subunit arrangement in intermediate filaments was studied by low-angle rotary shadowing. NF-L formed a pair of 70 to 80 nm rods in a low ionic strength solution at pH 6.8. Two 70 to 80 nm rods appeared to associate in an antiparallel manner with an overlap of about 55 nm, almost the same length as the alpha-helix-rich central rod domain of intermediate filament proteins. The overlap extended for three-beaded segments, present at 22 nm intervals along the pairs of rods. The observations that (1) 70 to 80 nm rods were a predominant structure in a low ionic strength solution at pH 8.5, (2) the molecular weights of the rod and the pair were measured by sedimentation equilibrium as 190,000 and 37,000 respectively, and (3) the rods formed from the trypsin-digested NF-L had a length of about 47 nm, indicated that the 70 to 80 nm rod is the four-chain complex and the pair of rods is the eight-chain complex. Similar structures were observed with glial fibrillary acidic protein, indicating that these oligomeric structures are common to other intermediate filament proteins. NF-L assembled into short intermediate-sized filaments upon dialysis against a low-salt solution containing 1 to 2 mM-MgCl2 at 4 degrees C. The majority of these short filaments possessed four or five-beaded segments, suggesting that the pair of rods were arranged in a half-staggered fashion in neurofilaments. On the basis of these observations, we propose the following model for the intermediate filament subunit arrangement. (1) The four-chain complex is the 70 to 80 nm rod, in which two coiled-coil molecules align in parallel and in register. (2) Two four-chain complexes form the eight-chain complex by associating in an antiparallel fashion with the overlap of the entire central rod domain. (3) The eight-chain complex is the building block of the intermediate filament. The eight-chain complexes are arranged in a half-staggered fashion within the intermediate filament.     

Desmin-containing intermediate filaments: structural analysis using monoclonal antibodies

1. Monoclonal antibodies have been raised against N- and C-terminal desmin sequence regions. 2. The antibodies decorated desmin intermediate filaments in a helical fashion with four antibody molecules per helix turn. 3. The filaments could be decorated with both types of antibody consecutively. 4. These results support a model of intermediate filament assembly in which the tetrameric protofilaments are aligned in a staggered fashion with partial overlapping of the central rod domain regions of the desmin sequence.     

Structure of the peripheral domains of neurofilaments revealed by low angle rotary shadowing

The structure of the peripheral domains of neurofilaments (NFs) was revealed by rotary shadowing electron microscopy. NFs were isolated from bovine spinal cords by Sepharose CL-4B gel filtration and examined by low angle rotary shadowing. The peripheral domains appeared as thin, flexible, filamentous structures projecting from the intermediate filament core, with a constant density along their entire length. The average length of the projections was approximately 85 nm and the width about 4 nm. These projections appeared from regularly distributed sites, at 22 nm spacing, which seemed to correspond to the typical repeat of the alpha-helix-rich rod domain of the core filament. The density of the projections was found to be 4.1 (+/- 0.6) per 22 nm. We performed reconstitution experiments using purified NF polypeptides to confirm that the projection was indeed the NF peripheral domain. Individual components of the NF triplet, i.e. NF-L, NF-M and NF-H, were purified by DE-52 and Mono-Q anion exchange chromatographies in the presence of 6 M-urea and were assembled in various combinations into filaments. Reassembled filaments were somewhat more slender than the isolated NFs and exhibited a distinct 22 nm axial periodicity. While prominent projections were not observed in the filaments assembled from NF-L alone, reconstructed filaments containing NF-L plus either NF-M or NF-H revealed many projections. The average length of the projections in the filaments reconstructed from NF-L and NF-H was about 63 nm. The projections of reconstructed filaments from NF-L and NF-M were about 55 nm in length. The difference in the lengths of the projections might reflect the difference in the length of the carboxy-terminal tail domain between NF-M and NF-H. The results are interpreted to show that the carboxy-terminal tail domains of NFs project in a regular pattern from the core filament, which is consistent with a half-staggered organization of the tetrameric subunits.     

The rod domain of NF-L determines neurofilament architecture, whereas the end domains specify filament assembly and network formation

Neurofilaments, assembled from NF-L, NF-M, and NF-H subunits, are the most abundant structural elements in myelinated axons. Although all three subunits contain a central, alpha-helical rod domain thought to mediate filament assembly, only NF-L self-assembles into 10-nm filaments in vitro. To explore the roles of the central rod, the NH2- terminal head and the COOH-terminal tail domain in filament assembly, full-length, headless, tailless, and rod only fragments of mouse NF-L were expressed in bacteria, purified, and their structure and assembly properties examined by conventional and scanning transmission electron microscopy (TEM and STEM). These experiments revealed that in vitro assembly of NF-L into bona fide 10-nm filaments requires both end domains: whereas the NH2-terminal head domain promotes lateral association of protofilaments into protofibrils and ultimately 10-nm filaments, the COOH-terminal tail domain controls lateral assembly of protofilaments so that it terminates at the 10-nm filament level. Hence, the two end domains of NF-L have antagonistic effects on the lateral association of protofilaments into higher-order structures, with the effect of the COOH-terminal tail domain being dominant over that of the NH2-terminal head domain. Consideration of the 21-nm axial beading commonly observed with 10-nm filaments, the approximate 21-nm axial periodicity measured on paracrystals, and recent cross-linking data combine to support a molecular model for intermediate filament architecture in which the 44-46-nm long dimer rods overlap by 1-3-nm head-to-tail, whereas laterally they align antiparallel both unstaggered and approximately half-staggered.     

Assembly of intermediate filaments

The assembly of intermediate filaments is a fundamental property of the central rod domain of the individual subunit proteins. This rod domain, with its high propensity for α-helix formation, is the common and identifying feature of this family of proteins. Assembly occurs in vitro in the absence of other proteins or exogenous sources of energy; in vivo, it appears as if other factors, as yet poorly understood, modulate the assembly of intermediate filaments. Parallel, in-register dimers form via coiled-coil interactions of the rod domain. Tetramers may form from staggered arrays of parallel or antiparallel arrangements of dimers. Higher-order polymerization, which occurs spontaneously if the ionic strength of a mixture of dimers and tetramers is raised, proceeds rapidly through poorly described intermediates to the final 10 nm filament. This process is dependent on and modulated by the non-α-helical end domains, as well as those amino acids present at the very beginning and end of the rod domain. The interactions governing tetramer formation are most probably the same ones that are responsible for the lateral and longitudinal associations within intermediate filaments.     

Modulation of desmin intermediate filament assembly by a monoclonal antibody

We have used a monoclonal antibody against desmin to examine the assembly of intermediate filaments (IF) from their building blocks, the tetrameric protofilaments. The antibody, designated D76, does not cross react with any other IF proteins (Danto, S.I., and D.A. Fischman. 1984. J. Cell Biol. 98:2179-2191). It binds to a region amino-terminal to cys-324 of avian desmin that is resistant to chymotrypsin and trypsin digestion, and in the electron microscope appears to bind to the ends of tetrameric protofilaments. In combination, these findings suggest that the epitope of the antibody resides at the amino-terminal end of the alpha-helical rod domain. Preincubation of desmin protofilaments with an excess of D76 antibodies blocks their subsequent assembly into IF. In the presence of sub-stoichiometric amounts of antibodies, IF are assembled from protofilaments but they are morphologically aberrant in that (a) they are capped by IgG molecules at one or both ends; (b) they are unraveled to varying degree, revealing a characteristic right-handed helical arrangement of sub-filamentous strands of different diameters. The antibody binds only to the ends but not along the length of desmin IF. The most straightforward explanation for this is that the epitope resides in a part of the desmin molecule that becomes buried within the core of the filament upon polymerization and is therefore inaccessible to the antibody.     

Molecular interactions in paracrystals of a fragment corresponding to the alpha-helical coiled-coil rod portion of glial fibrillary acidic protein: evidence for an antiparallel packing of molecules and polymorphism related to intermediate filament structure

We have expressed in Escherichia coli a fragment of c-DNA that broadly corresponds to the alpha-helical coiled-coil rod section of glial fibrillary acidic protein (GFAP) and have used the resultant protein to prepare paracrystals in which molecular interactions can be investigated. An engineered fragment of mouse GFAP c-DNA was inserted into a modified version of the E. coli expression vector pLcII, from which large quantities of a lambda cII-GFAP rod fusion protein were prepared. A protein fragment corresponding to the GFAP rod was then obtained by proteolysis with thrombin. Paracrystals of this material were produced using divalent cations (Mg, Ca, Ba) in the presence of a chaotrophic agent such as thiocyanate. These paracrystals showed a number of polymorphic patterns that were based on a fundamental pattern that had dyad symmetry and an axial repeat of 57 nm. Analysis of both positive and negative staining patterns showed that this fundamental pattern was consistent with a unit cell containing two 48-nm-long molecules in an antiparallel arrangement with their NH2 termini overlapping by approximately 34 nm. More complicated patterns were produced by stacking the fundamental pattern with staggers of approximately 1/5, 2/5, and 1/2 the axial repeat. The molecular packing the unit cell was consistent with a range of solution studies on intermediate filaments that have indicated that a molecular dimer (i.e., a tetramer containing four chains or two coiled-coil molecules) is an intermediate in filament assembly. Moreover, these paracrystals allow the molecular interactions involved in the tetramer to be investigated in some detail.     

In vitro assembly properties of mutant and chimeric intermediate filament proteins: insight into the function of sequences in the rod and end domains of IF

The factors and mechanisms regulating assembly of intermediate filament (IF) proteins to produce filaments with their characteristic 10 nm diameter are not fully understood. All IF proteins contain a central rod domain flanked by variable head and tail domains. To elucidate the role that different domains of IF proteins play in filament assembly, we used negative staining and electron microscopy (EM) to study the in vitro assembly properties of purified bacterially expressed IF proteins, in which specific domains of the proteins were either mutated or swapped between a cytoplasmic (mouse neurofilament-light (NF-L) subunit) and nuclear intermediate filament protein (human lamin A). Our results indicate that filament formation is profoundly influenced by the composition of the assembly buffer. Wild type (wt) mouse NF-L formed 10 nm filaments in assembly buffer containing 175 mM NaCl, whereas a mutant deleted of 18 NH2-terminal amino acids failed to assemble under similar conditions. Instead, the mutant assembled efficiently in buffers containing CaCl2 > or = 6 mM forming filaments that were 10 times longer than those formed by wt NF-L, although their diameter was significantly smaller (6-7 nm). These results suggest that the 18 NH2-terminal sequence of NF-L might serve two functions, to inhibit filament elongation and to promote lateral association of NF-L subunits. We also demonstrate that lengthening of the NF-L rod domain, by inserting a 42 aa sequence unique to nuclear IF proteins, does not compromise filament assembly in any noticeable way. Our results suggests that the known inability of nuclear lamin proteins to assemble into 10 nm filaments in vitro cannot derive solely from their longer rod domain. Finally, we demonstrate that the head domain of lamin A can substitute for that of NF-L in filament assembly, whereas substitution of both the head and tail domains of lamins for those of NF-L compromises assembly. Therefore, the effect of lamin A "tail" domain alone, or the synergistic effect of lamin "head" and the "tail" domains together, interferes with assembly into 10-nm filaments.     

Crystal structure of the alpha-actinin rod reveals an extensive torsional twist

BACKGROUND: Alpha-actinin is a ubiquitously expressed protein found in numerous actin structures. It consists of an N-terminal actin binding domain, a central rod domain, and a C-terminal domain and functions as a homodimer to cross-link actin filaments. The rod domain determines the distance between cross-linked actin filaments and also serves as an interaction site for several cytoskeletal and signaling proteins. RESULTS: We report here the crystal structure of the alpha-actinin rod. The structure is a twisted antiparallel dimer that contains a conserved acidic surface. CONCLUSIONS: The novel features revealed by the structure allow prediction of the orientation of parallel and antiparallel cross-linked actin filaments in relation to alpha-actinin. The conserved acidic surface is a possible interaction site for several cytoplasmic tails of transmembrane proteins involved in the recruitment of alpha-actinin to the plasma membrane.     

Quantitative atomic force microscopy image analysis of unusual filaments formed by the Acanthamoeba castellanii myosin II rod domain

We describe a quantitative analysis of Acanthamoeba castellanii myosin II rod domain images collected from atomic force microscope experiments. These images reveal that the rod domain forms a novel filament structure, most likely requiring unusual head-to-tail interactions. Similar filaments are seen also in negatively stained electron microscopy images. Truncated myosins from Acanthamoeba and other model organisms have been visualized before, revealing laterally associated bipolar minifilaments. In contrast, the filament structures that we observe are dominated by axial rather than lateral polymerization. The unusually small features in this structure (1-5 nm) required the development of quantitative and statistical techniques for filament image analysis. These techniques enhance the extraction of features that hitherto have been difficult to ascertain from more qualitative imaging approaches. The heights of the filaments are observed to have a bimodal distribution consistent with the diameters of a single rod domain and a pair of close-packed rod domains. Further quantitative analysis indicates that in-plane association is limited to at most a pair of rod domains. Taken together, this implies that the filaments contain no more than four rod domains laterally associated with one another, somewhat less than that seen in bipolar minifilaments. Analysis of images of the filaments decorated with an anti-FLAG antibody reveals head-to-tail association with mean distances between the antibodies of 75 +/- 15 nm. We consider a set of molecular models to help interpret possible structures of the filaments.     

Unusual ultrastructures of the Branchiostoma IF protein C2 containing heptads in the tail

Branchiostoma intermediate filament (IF) protein C2 contains a long tail domain consisting of several degenerate repeats which display a heptad repeat pattern. This unique tail sequence is predicted to constitute a long coiled coil domain in C2, which is separated from the rod by a glycine-rich linker L3. The recombinant IF protein C2 shows, in electron microscopy (EM), parallel rodlike dimers of 66.7 nm decorated by a larger globule on one side and a smaller globule on the other side. In contrast, the length of the tailless C2 dimers, decorated by only one small globule, is about 26 nm shorter. These results indicate that both the rod domain and the newly predicted coiled coil segment 3 participate in the formation of a double-stranded coiled coil dimer. Moreover, the two to four C2 dimers are able to associate via their globular tail domain into multiarm oligomers, an ability not seen by the tailless C2 mutant or the other currently known protostomic and vertebrate IFs.     

Chemical cross-linking indicates a staggered and antiparallel protofilament of desmin intermediate filaments and characterizes one higher-level complex between protofilaments.

Tetrameric rods, protofilaments and assembled filaments of desmin, the intermediate filament protein of muscle, have been chemically cross-linked with the lysine specific cross-linkers EGS [ethylene glycol bis(succinimidylsuccinate), 1.61 nm span] and bis(sulfosuccinimidyl) suberate (1.14 nm span). One bis(sulfosuccinimidyl)suberate and two EGS cross-links were isolated from the rod and characterized. They show that the two coiled coils in the rod tetramer are staggered by approximately 15-20 nm and strongly indicate an antiparallel arrangement in which the inner overlapping part of the rod is formed by the amino-terminal helices 1A, 1B and 2A. Both EGS cross-links identified in the rod were also isolated from cross-linked filaments. The isolated rod, therefore, represents a complex also present in identical, or very similar form in protofilaments and in assembled filaments. Cross-linked filaments yielded a third EGS cross-link that must have been formed between neighboring protofilaments. It connects the highly conserved carboxy-terminus of helix 2B of the first protofilament to the overlap region formed by helices 1A and 2A of the second protofilament. The restrictions posed by these cross-links on current filament models are discussed.     

Electron paramagnetic resonance analysis of the vimentin tail domain reveals points of order in a largely disordered region and conformational adaptation upon filament assembly

Very little data have been reported that describe the structure of the tail domain of any cytoplasmic intermediate filament (IF) protein. We report here the results of studies using site directed spin labeling and electron paramagnetic resonance (SDSL‐EPR) to explore the structure and dynamics of the tail domain of human vimentin in tetramers (protofilaments) and filaments. The data demonstrate that in contrast to the vimentin head and rod domains, the tail domains are not closely apposed in protofilaments. However, upon assembly into intact IFs, several sites, including positions 445, 446, 451, and 452, the conserved “beta‐site,” become closely apposed, indicating dynamic changes in tail domain structure that accompany filament elongation. No evidence is seen for coiled‐coil structure within the region studied, in either protofilaments or assembled filaments. EPR analysis also establishes that more than half of the tail domain is very flexible in both the assembly intermediate and the intact IF. However, by positioning the spin label at distinct sites, EPR is able to identify both the rod proximal region and sites flanking the beta‐site motif as rigid locations within the tail. The rod proximal region is well assembled at the tetramer stage with only slight changes occurring during filament elongation. In contrast, at the beta site, the polypeptide backbone transitions from flexible in the assembly intermediate to much more rigid in the intact IF. These data support a model in which the distal tail domain structure undergoes significant conformational change during filament elongation and final assembly.     

Structural characterization of human vimentin rod 1 and the sequencing of assembly steps in intermediate filament formation in vitro using site-directed spin labeling and electron paramagnetic resonance

We have previously established the utility of site-directed spin labeling and electron paramagnetic resonance to determine structural relationships among proteins in intact intermediate filaments. Using this same approach we have introduced spin labels at 21 residues between amino acids 169 and 193 in rod domain 1 of human vimentin. The electron paramagnetic resonance spectra provide direct evidence for the coiled coil nature of the vimentin dimer in this region. This finding is consistent with predictions but has never been demonstrated previously. In a previous study we identified residue 348 in the rod domain 2 as one point of overlap between adjacent dimers in intact filaments. In the present study we defined residue 191 in the rod domain 1 as a second point of overlap and established that the dimers are arranged in an anti-parallel and staggered orientation at this site. Finally, by isolating spin-labeled samples at successive stages during the dialysis that lead to filament assembly in vitro, we have been able to establish a sequence of interactions that occurs during in vitro assembly, starting with the alpha helix and loose coiled coil dimer formation, then the formation of tetrameric species centered on residue 191, followed by interactions centered on residue 348 suggestive of octamer or higher order multimer formation. A continuation of this strategy revealed that both 191-191 and 348-348 interactions are present in low ionic strength Tris buffers when vimentin is maintained at the "protofilament" stage of assembly.     

The amino acid sequence of chicken muscle desmin provides a common structural model for intermediate filament proteins.

The complete amino acid sequence of muscle desmin reported here is the first for an intermediate filament protein. Alignment with partial data available for vimentin, glial fibrillary acid protein, neurofilament 68 K, two wool alpha-keratins, and a recently described DNA clone covering 90% of an epidermal keratin shows that all seven proteins have extensive homologies and therefore form a complex multigene family, the intermediate filament proteins. The hard alpha-keratins of wool appear to be a special subset of epithelial keratins. The sequence information reveals, as the dominant structural principle, a rod-like middle domain arising from several alpha-helical segments able to form interchain coiled-coil elements. The proposed helices are separated by short spacers, which like the two terminal domains seem built from non-alpha-helical material. Attention is drawn to the sometimes very striking sequence homologies along the rod and the high sequence variability in the terminal domains. Finally, chemical cross-linking experiments performed on the isolated desmin rod show that intermediate filament structure seems not to be based on triple-stranded coiled-coils as currently thought, but rather reflects protofilament units built as a dimer of normal interchain double-stranded coiled-coils.     

The structural relation between intermediate filament proteins in living cells and the alpha-keratins of sheep wool.

Although not complete, the available sequence data on smooth muscle desmin, a prototype of 10 nm filaments present in living vertebrate cells, and two wool alpha-keratin components indicate a common structural motif . A similarly sized rod-like middle domain based mainly on alpha-helices probably able to form coiled-coils is flanked by differently sized terminal domains of non-alpha-helical nature. Within the middle domain there seem to be at least two regions where wool keratins and 10 nm filament proteins show a noticeable degree of sequence homology. In general, however, the proteins have diverged to an astonishing degree. Although the analysis seems to support, in general terms, a separation of the rod into two nearly equally long coiled-coils it raises doubts about additional aspects of current models of 10 nm filament organization. We propose that the terminal domains are directly involved in filament assembly making this process permanent in wool alpha-keratins because of the many disulfide bonds present in these regions. The 10 nm filaments of most living cells seem to avoid this frozen state and lack a similar wealth of cysteine residues.     

Aggregation of wool keratin intermediate filament proteins

The wool keratin intermediate filament proteins were isolated as their S-carboxymethyl derivatives (S-carboxymethylkerateine A, SCMKA) and purified by gel filtration to remove residual non-helical protein of low molecular weight. The alpha-helix content of purified SCMKA was approximately 62% in agreement with that predicted for the alpha-helical coiled-coil segments from the amino acid sequences of the subunits. In aqueous buffer at pH 11 or in n-propanol (20% v/v) at pH 9.2 very large aggregates are dissociated and SCMKA exists largely as a mixture of the dimer (two-chain coiled-coil of Mr approximately 103,000) and the tetramer. The protein species are not in rapidly reversible equilibrium as judged from gel filtration and sedimentation equilibrium. It is probable that species with a range of association constants are present. The equilibrium is shifted towards the dimer with change of pH from 9.2 to 11 or by the addition of 20% (v/v) n-propanol. The tetrameric proteolytic digestion product which is derived from the 1B segment of the alpha-helical rod section of the keratin molecule dissociates in a similar way to intact SCMKA with increase of pH and in the presence of n-propanol. This indicates the importance of this region of the rod domain in the initial stages of the assembly of the filament. Electrostatic and hydrophobic interactions are implicated in the association of the two-chain coiled-coil to the tetramer both in intact SCMKA and the 1B segment tetramer. The results are discussed in relation to the intact dimeric and tetrameric complexes obtained from other intermediate filament types.     

Neurofilament architecture combines structural principles of intermediate filaments with carboxy-terminal extensions increasing in size between triplet proteins

Mammalian neurofilament triplet proteins (68 K, 160 K and 200 K) have been correlated by a biochemical, immunological and protein chemical study. The 160 K and 200 K triplet proteins are intermediate filament proteins in their own right, since they reveal the alpha-helical coiled-coil rod domain analyzed in detail for the 68 K protein. Triplet proteins display two distinct arrays. Their amino-terminal region built analogously to non-neuronal intermediate filament proteins should allow a co-polymerization process via the interaction of coiled-coil domains. The extra mass of all triplet proteins is allocated to carboxy-terminally located extensions of increasing size and unique amino acid sequences. These may provide highly charged scaffolds suitable for interactions with other neuronal components. Such a domain of 68 K reveals, in sequence analysis, 47 glutamic acids within 106 residues. The epitope recognized by a monoclonal antibody reacting probably with all intermediate filament proteins has been mapped. It is located within the last 20 residues of the rods, where six distinct intermediate filament proteins point to a consensus sequence.     

Assembly of vimentin in vitro and its implications concerning the structure of intermediate filaments

After dialysis against 10 mM-Tris-acetate (pH 8.5), vimentin that has been purified in the presence of urea is present in the form of tetrameric 2 to 3 nm X 48 nm rods known as protofilaments. These building blocks in turn polymerize into intermediate filaments (10 to 12 nm diameter) when they are dialyzed against a solution of physiological ionic strength and pH. By varying the ionic conditions under which polymerization takes place, we have identified two classes of assembly intermediates whose structures provide clues as to how an intermediate filament may be constructed. The structure of the first class, seen when assembly takes place at 10 to 20 mM-salt at pH 8.5, strongly suggests that one of the initial steps of filament assembly is the association of protofilaments into pairs with a half-unit axial stagger. Increasing the ionic strength of the assembly buffer leads to the emergence of short, full-width intermediate filaments at approximately 50 mM-salt at pH 8.5. In the presence of additional protofilaments, these short filaments elongate to many micrometers when the ionic strength and pH are further adjusted to physiological levels. The electron microscope images of the assembly intermediates suggest that vimentin-containing intermediate filaments are made up of eight protofilaments, assembled such that there is an approximately 22 nm axial stagger between neighboring protofilaments. We propose that this half-unit staggering of protofilaments is a fundamental feature of intermediate filament structure and assembly, and that it could account for the 20 to 22 nm axial repeat seen in all intermediate filaments examined so far.