山金柑实生后代四倍体发掘及形态和代谢评价

以多胚系山金柑（Fortunella hindsii Swingle）为材料,采用“观根辨叶看油胞”形态初选法,从1289株实生后代筛选出疑似四倍体（双二倍体）8株,流式细胞仪检测和SSR分子鉴定表明它们均为同源四倍体,初选准确率100%,群体自然发生率0.62%。对其形态和初生代谢物进行检测,结果显示：山金柑四倍体株高、茎粗、节间数、节间长、气孔密度均显著低于二倍体,而叶片厚度、气孔大小显著高于二倍体;GC-MS分析鉴定到24种初生代谢物,四倍体叶片奎宁酸含量显著高于二倍体,肌醇、4-氨基丁酸和1-棕榈酸单甘油酯含量显著低于二倍体。     

Comparison of age and growth performance of diploid and tetraploid loach <Emphasis Type="Italic">Misgurnus anguillicaudatus</Emphasis> in the Yangtze River basin,China

Diploids and tetraploids of the cyprinid loach Misgurnus anguillicaudatus coexist in many natural habitats in Asia. However, little is known about the biological and ecological differences between these two ploidy forms. We examined age, body size and growth rates of fish in a mixed ploidy population of M. anguillicaudatus in the Yangtze River basin in China. The sex ratios of both diploid and tetraploid M. anguillicaudatus were highly skewed toward females, who tended to be larger than males. The age distributions of the collected specimens clearly indicated that tetraploids lived longer than diploids. For example, we found a substantial number of tetraploids that were 5+ years old, while the oldest diploids were 4+ years old. Tetraploids were also longer and heavier than diploids for both sexes. Using the empirical body size and age data, we inferred the growth patterns of these fish with the von Bertalanffy growth function. The estimated asymptotic body lengths (L _∞) indicated that tetraploids could indeed achieve larger body sizes than diploids. This difference was partially due to the increased growth rate, as demonstrated by lower growth coefficient (K) and higher growth performance index (φ’). In sum, we show that tetraploid M. anguillicaudatus exhibited significantly increased longevity and superior growth performance compared to diploids. These differences may contribute to the ecological competitiveness of tetraploid M. anguillicaudatus, thus enabling them to coexist with diploids in certain ecological settings.     

菘蓝二倍体及其同源四倍体遗传差异的ISSR分析

以1个菘蓝二倍体及其10个同源四倍体株系为材料,利用19个随机扩增ISSR引物分析其遗传差异性,为菘蓝多倍体诱变的基因表达调控以及遗传改良提供依据。结果显示:菘蓝二倍体与其同源四倍体及四倍体之间的ISSR多态性有明显差异,除主要遗传位点相同外,有些四倍体株系扩增条带数多于二倍体,有些四倍体株系扩增条带数少于二倍体,四倍体株系间亦有多态位点;11个株系共扩增111条多态性条带,多态性达55.22%。聚类分析显示,不同四倍体株系与二倍体的遗传差异大小亦不同。研究表明,菘蓝二倍体与其同源四倍体具有中等偏高的遗传差异性。     

A CYTOGENETIC ANALYSIS OF CERTAIN POLYPLOIDS IN GRINDELIA (COMPOSITAE)

Two diploid taxa, Grindelia procera and G. camporum, and 3 tetraploid ones, G. camporum, G. hirsutula, and G. stricta, have been studied to ascertain their interrelationships. Meiosis in diploid parental strains was regular, the common chromosome configuration being 5 rod bivalents and 1 ring bivalent. The average chiasmata frequency per chromosome was 0.60. Pollen fertility was about 90% in all strains examined. Diploid interspecific hybrids had normal meiosis with an average chiasmata frequency of 0.56 per chromosome. No heterozygosity for inversions or interchanges was detected, and pollen fertility was above 85%. Meiosis in parental tetraploid strains was characterized by the presence of quadrivalents in addition to a complementary number of bivalents. The average chiasmata frequency per chromosome was 0.59 and pollen fertility was generally about 80%. Tetraploid interspecific hybrids also had quadrivalents, normal meiosis, and high pollen fertility. Close genetic relationships between the diploids and between the tetraploids are indicated, and geographical, ecological, and seasonal barriers to gene exchange exist. Attempts to obtain hybrids between diploids and tetraploids were successful in a few cases. The hybrids were tetraploid and had normal meiosis and fertility similar to parental and F₁ tetraploids. Their origin was by the union of unreduced gametes of the diploid female parent and normal pollen from the tetraploid parent. On the basis of chromosome homology, normal meiosis, plus high fertility exhibited in the diploid, tetraploid, and diploid X tetraploid interspecific hybrids, these species of Grindelia are considered to be a part of an autopolyploid complex. Gene exchange between diploids and diploids, tetraploids and tetraploids, and diploids and tetraploids is possible. Tetraploid G. camporum may have originated by hybridization between G. procera and diploid G. camporum with subsequent doubling of chromosomes and selection for the combined characteristics of the diploids.     

In vitro induction of allohexaploid and resulting phenotypic variation in <Emphasis Type="Italic">Populus</Emphasis>

Although triploid Populus varieties have been used widely in timber and pulpwood production, the performance of economic traits in Populus with higher ploidy levels remains unknown due to a lack of germplasms with higher ploidy. In this study, we first successfully induced hexaploids in Populus by treating triploid leaf explants with colchicine in vitro. In total, 32 hexaploids were produced. The frequency of hexaploids was significantly affected by the interaction between colchicine concentration and exposure time. The highest hexaploid induction efficiency was 16.89% (±?2.26), which was achieved by treating explants with 0.04% colchicine for 7 days. Compared to triploids, hexaploids had thinner epidermal hair, larger stomata and protoplasts, and fewer chloroplasts, indicating that significant phenotypic changes accompanied an increase in ploidy level. These hexaploids are valuable for investigating the performance of economic traits in Populus with higher ploidy levels and have the potential to be used as parents to produce new tetraploid and pentaploid germplasms in Populus breeding programs.     

Factors influencing distribution and local coexistence of diploids and tetraploids of <Emphasis Type="Italic">Vicia cracca</Emphasis>: inferences from a common garden experiment

Vicia cracca diploids and autotetraploids are highly parapatric in Europe; tetraploids reside in western and northern part, whereas diploids occupy much drier south-eastern part. They meet together in a Central European contact zone. This distribution pattern raised questions about a transformative effect of polyploidization on plant performance and environmental tolerances. We investigated plant survival, growth, and seed production in two water regimes in a common garden experiment using seeds collected from five localities in the Central European contact zone where diploids and tetraploids occur in sympatry. Obtained data imply that tetraploids of V. cracca are not generally superior in performance to diploids. Significantly larger seeds from tetraploid mother plants collected in the field were not correlated with greater stature of the seedlings. Nonetheless, tetraploids might have a potential to out-compete diploids in the long run due to the tetraploids’ ability of greater growth which manifested in the second year of cultivation. Considering the response of diploids and tetraploids to water supply, drought stressed tetraploids but not diploids produced a higher proportion of aborted seeds than watered ones, which implies that tetraploids are more drought susceptible than diploids. On the other hand, decreased plant height in drought stresses tetraploids, which simultaneously increased total seed production, may suggest that tetraploids have a greater ability to avoid local extinction under unfavourable conditions by enhancing biomass allocation into production of seeds at the cost of lower growth. The significant interaction between ploidy level and locality in several traits suggests possible polyfyletic origin of tetraploids and the necessity to clarify the history of the tetraploids in Europe.     

The effect of tetraploidization of wild Arachis on leaf morphology and other drought-related traits

Cultivated peanut is an allotetraploid (genome type AABB) with a very narrow genetic base, therefore wild species are an attractive source of new variability and traits. Because most wild species are diploid, the first step of introgression usually involves hybridization of wild species and polyploidization to produce a synthetic allotetraploid (AABB) that is sexually compatible with peanut. This study investigates drought-related traits such as leaf morphology, transpiration profile, chlorophyll meter readings (SCMR), specific leaf area (SLA) and transpiration rate per leaf area for two wild diploids (Arachis duranensis and Arachis ipaënsis) that could be of interest for improvement of the peanut crop. Furthermore, the inheritance of the traits from the diploid to the tetraploid state was investigated. Results showed that whilst some diploid traits such as SCMR, are maintained through hybridization and polyploidization, most characters, such as the leaf area, stomata size, trichome density and transpiration profile, are substantially modified. The study concludes that direct evaluations of drought-related traits in wild diploids may be useful for evaluation of wild species to be used in introgression. However, evaluations on wild-derived synthetic tetraploids are likely to be more informative.     

Influence of ploidy level on morphology,growth and drought susceptibility in <Emphasis Type="Italic">Spathiphyllum wallisii</Emphasis>

In this study, we analysed morphological, anatomical and physiological effects of polyploidisation in Spathiphyllum wallisii in order to evaluate possible interesting advantages of polyploids for ornamental breeding. Stomatal density was negatively correlated with increased ploidy level. Stomatal size increased in polyploids. Tetraploid Spathiphyllum plants had more ovate and thicker leaves. The inflorescence of tetraploids had a more ovate and thicker spathum, a more cylindrical spadix and a thicker but shorter flower stalk. Biomass production of the tetraploids was reduced, as expressed by lower total dry weights, and tetraploids produced fewer shoots and leaves compared with their diploid progenitors. Furthermore, tetraploid Spathiphyllum plants were more resistant to drought stress compared with diploid plants. After 15 days of drought stress, diploids showed symptoms of wilting, while the tetraploids showed almost no symptoms. Further, measurements of stomatal resistance, leaf water potential, relative water content and proline content indicated that the tetraploid genotypes were more resistant to drought stress compared with the diploids.     

Habitat differentiation, hybridization and gene flow patterns in mixed populations of diploid and autotetraploid Dactylorhiza maculata s.l. (Orchidaceae)

Detailed ecological, morphological and molecular analyses were performed in mixed populations of diploid and autotetraploid Dactylorhiza maculata s.l. in Scandinavia. Comparisons were made with pure populations of either diploid ssp. fuchsii or tetraploid ssp. maculata. It was shown that mixed populations are the result of secondary contact between ssp. fuchsii and ssp. maculata. No patterns of recent and local autopolyploidization were found. Morphology and nuclear DNA markers (internal transcribed spacers of nuclear ribosomal DNA) showed that diploids and tetraploids from mixed populations have similar levels of differentiation to diploids and tetraploids from pure populations. Vegetation analyses, as well as analyses of environmental variables, revealed that diploid and tetraploid individuals in mixed populations are ecologically well differentiated on a microhabitat level. Diploids and tetraploids in pure populations have wider ecological amplitudes than they do in mixed populations. Triploid hybrids grew in intermediate microhabitats between diploids and tetraploids in the mixed populations. Plastid DNA markers indicated that both diploids and tetraploids may act as the maternal parent. Based on morphology and nuclear markers triploids are more similar to tetraploids than to diploids. There were indications of introgressive gene flow between ploidy levels. Plastid markers indicated that gene flow from diploid to tetraploid level is most common, but nuclear markers suggested that gene flow in opposite direction also may occur. Similar patterns of differentiation and gene flow appeared in localities that represented contrasting biogeographic regions. Disturbance and topography may explain why hybridization was slightly more common and the differentiation patterns somewhat less clear in the Scandinavian mountains than in the coastal lowland. An erratum to this article can be found at     

Karyotype,genome size,and in vitro chromosome doubling of Pfaffia glomerata (Spreng.) Pedersen

Pfaffia glomerata (Spreng.) Pedersen, known worldwide as Brazilian ginseng, has an important commercial value due to its pharmaceutical properties. In addition to the newly described karyological traits and the first estimation of DNA content, this study reports a protocol for the successful induction of tetraploidy. Natural diploid individuals (2n = 34) showed a symmetric karyotype, centromeric DAPI⁺ bands, one chromosome pair with a CMA⁺ band and 45S rDNA site and another with one 5S rDNA site. To induce chromosome duplication, small nodal buds were cultured in semi-solid MS-based medium with 2.22 μM BA, 2.69 μM NAA, and colchicine or oryzalin at 10, 15, 20, 25, and 30 μM for 1 or 2 weeks before being transferred to MS basal medium. The results showed that colchicine induced tetraploid plants, mainly after 1 week of exposure, whereas oryzalin treatment induced only mixoploid plants. The tetraploid plants exhibited twice the chromosome number and DNA content and twice the number of chromosome markers observed for the diploids. Chromosome duplication reduced the dry mass of the stems and roots of the polyploid plants compared to the diploids, and the stomatal density was also reduced on the abaxial and adaxial leaf surfaces of the polyploids. Additionally, the production of β-ecdysone was 50 % higher in the tetraploids than in the diploids. Thus, chromosome doubling showed that is possible to increase the content of β-ecdysone, highlighting the considerable potential of this technique to produce new cultivars with high commercial value.     

In vitro induction of tetraploids in Arachis paraguariensis

In this study, an efficient procedure was established for successful induction of tetraploid Arachis paraguariensis by treating diploid explants with colchicine. Quartered-seed, callus and shoot-tips were treated with colchicine at concentrations of 0.05, 0.1, 0.2 and 0.5?% (w/v) for 4, 8, 16, 20 and 24?h before they were transferred unto modified Murashige and Skoog medium for either callus induction or shoot regeneration. Results showed that quartered-seed displayed the highest frequency of in vitro plantlet regeneration and tetraploid induction, as well as the lowest mortality rate. Flow cytometric analysis also confirmed that the induced tetraploids from quartered-seed were true-to-type. The 0.5?% colchicine treatment for 4 to 8?h gave the best results with 39 and 43?% of the explants yielding tetraploid plants, respectively. Two?months following transfer to ex vitro environment, morphological and growth characteristics of the induced tetraploids were measured. Overall, increasing the ploidy level from 2× to 4× resulted in fewer stomata but more trichomes per unit leaf area. Tetraploid plants obtained in this study should expand the genetic base of Arachis, and can also be used in overcoming the existing hybridization barriers that may be due to ploidy differences within the genus Arachis.     

Ploidy effects in isogenic populations of alfalfa : I. Ribulose-1,5-bisphosphate carboxylase, soluble protein, chlorophyll, and DNA in leaves

The influence of polyploidization on ribulose-1,5-bisphosphate carboxylase (RuBPCase), buffer-soluble protein (BSP), chlorophyll (Chl), and DNA was examined in fully expanded leaves of isogenic diploid-tetraploid (DDC 2X-4X) and tetraploid-octoploid (IC 4X-8X) sets of alfalfa (Medicago sativa L.). The concentration of RuBPCase in leaf extracts was determined by rocket immunoelectrophoresis. Activities of RuBPCase, expressed per milligram protein or per milligram Chl, and leaf tissue concentrations of RuBPCase, BSP, Chl, and DNA were similar between ploidy levels of the DDC 2X-4X set. Tetraploids and octoploids were similar in RuBPCase activities, expressed per milligram protein or per milligram Chl, and in leaf tissue concentrations of RuBPCase and DNA. Octoploids were significantly lower than tetraploids in concentrations of Chl and BSP.

When compared on a per leaf basis, tetraploids were 80% higher in BSP and essentially double comparable diploids in fresh weight, RuBPCase, Chl, and DNA. The observation that leaves of the DDC tetraploid population contain twice as much DNA as comparable diploids suggests that leaves of both ploidy levels contain similar numbers of cells. Leaves of the octoploid population were 33% to 80% higher than corresponding tetraploids in BSP, fresh weight, RuBPCase, Chl, and DNA. Ratios of RuBPCase to DNA and Chl to DNA were similar across ploidy levels of both isogenic sets suggesting that cellular content of Chl and RuBPCase increases proportionately with the amount of DNA per cell.

     

In vitro induction of tetraploids in an interspecific hybrid of Calanthe (Calanthe discolor × Calanthe sieboldii) through colchicine and oryzalin treatments

Tetraploids were successfully produced from diploid seeds obtained through interspecific crossing between Calanthe discolor and Calanthe sieboldii by treating with colchicine or oryzalin. Colchicine was tested at concentrations of 0.05 and 0.1 % for 0, 3, or 7 days and oryzalin was tested at a concentration of 0.003 % for 1, 2, 4, and 7 days, and the ploidy of the seedlings was determined by flow cytometry. Tetraploids (4×) were obtained from the interspecific hybrid seeds treated with all colchicine and oryzalin concentrations. The most efficient condition for inducing tetraploids seemed to be treated with 0.003 % oryzalin for 1 or 2 days. Cytological and morphological evidence confirmed the results of flow cytometric analysis. The stomatal density and sizes of the tetraploid plants were significantly higher and larger than those of the diploid plants. Differences in leaf shape were found between the tetraploid and diploid plants under the same growing conditions: the leaves of the diploids were elongated and those of the tetraploids were round.     

Triploid and Tetraploid Zhikong Scallop, <Emphasis Type="BoldItalic">Chlamys farreri</Emphasis> Jones et Preston,Produced by Inhibiting Polar Body I

: Triploid scallops are valuable for aquaculture because of their enlarged adductor muscle, and tetraploids are important for the commercial production of triploids. We tested tetraploid induction in the zhikong scallop by inhibiting polar body I in newly fertilized eggs. The ploidy of resultant embryos was determined by chromosome counting at 2- to 4-cell stage and by flow cytometry thereafter. Embryos from the control groups were mostly diploids (79%), along with some aneuploids. Embryos from the treated groups were 13% diploids, 18% triploids, 26% tetraploids, 13% pentaploids, and 36% aneuploids. Tetraploids, pentaploids, and most aneuploids suffered heavy mortality during the first week and became undetectable among the larvae at day 14. Five tetraploids (2%) were found among a sample of 267 spat from one of the replicates, and none was detected at day 450. The adductor muscle of triploid scallops was 44% heavier (P < .01) than that of diploids, confirming the value of the triploid technology in this species.     

Autotetraploids of Vicia cracca show a higher allelic richness in natural populations and a higher seed set after artificial selfing than diploids

Background and Aims

Despite the great importance of autopolyploidy in the evolution of angiosperms, relatively little attention has been devoted to autopolyploids in natural polyploid systems. Several hypotheses have been proposed to explain why autopolyploids are so common and successful, for example increased genetic diversity and heterozygosity and the transition towards selfing. However, case studies on patterns of genetic diversity and on mating systems in autopolyploids are scarce. In this study allozymes were employed to investigate the origin, population genetic diversity and mating system in the contact zone between diploid and assumed autotetraploid cytotypes of Vicia cracca in Central Europe.

Methods

Four enzyme systems resolved in six putative loci were investigated in ten diploid, ten tetraploid and five mixed-ploidy populations. Genetic diversity and heterozygosity, partitioning of genetic diversity among populations and cytotypes, spatial genetic structure and fixed heterozygosity were analysed. These studies were supplemented by a pollination experiment and meiotic chromosome observation.

Key Results and Conclusions

Weak evidence of fixed heterozygosity, a low proportion of unique alleles and genetic variation between cytotypes similar to the variation among populations within cytotypes supported the autopolyploid origin of tetraploids, although no multivalent formation was observed. Tetraploids possessed more alleles than diploids and showed higher observed zygotic heterozygosity than diploids, but the observed gametic heterozygosity was similar to the value observed in diploids and smaller than expected under panmixis. Values of the inbreeding coefficient and differentiation among populations (ρ_ST) suggested that the breeding system in both cytotypes of V. cracca is mixed mating with prevailing outcrossing. The reduction in seed production of tetraploids after selfing was less than that in diploids. An absence of correlation between genetic and geographic distances and high differentiation among neighbouring tetraploid populations supports the secondary contact hypothesis with tetraploids of several independent origins in Central Europe. Nevertheless, the possibility of a recent in situ origin of tetraploids through a triploid bridge in some regions is also discussed.     

Ribosomal RNA gene variation in diploid and tetraploid Tolmiea menziesii

Evidence from gross morphology, karyology and flavonoid chemistry suggests that Tolmiea menziesii is one of the clearest examples of autopolyploidy in natural populations. To provide additional data regarding the origin of the tetraploid cytotype of Tolmiea, both the 5S and 18S-25S ribosomal RNA genes were studied at the restriction enzyme level. Using restriction enzymes that cut once per repeat, the lengths of the 5S and 18S-25S ribosomal genes were estimated in diploids and tetraploid plants. There appear to be no consistent differences between diploids and tetraploids for the repeat length of the 18S-25S ribosomal genes. Furthermore, there is no significant repeat length heterogeneity within tetraploid plants for these genes. In addition, no differences in repeat length of the 5S genes were observed among the diploid and tetraploid plants analysed. The homogeneity observed among diploid and tetraploid plants for repeat length of the 5S and 18S-25S ribosomal genes is consistent with the hypothesis that the tetraploid cytotype is of autopolyploid origin.     

Multiple hybridization origin of Ranunculus cantoniensis (4x): evidence from trnL-F and ITS sequences and fluorescent in situ hybridization (FISH)

ITS sequences of Ranunculus cantoniensis apparently an allotetraploid were polymorphic at ten nucleotide sites. ITS-based phylogeny of the complex and its allied species showed that ITS clones of the tetraploid were clustered with R. silerifolius var. silerifolius, R. chinensis, R. silerifolius var. dolicathus and R. trigonus. Chloroplast trnL-F phylogeny showed that the complex is a natural group, in which the tetraploid shared the same clade with R. silerifolius var. dolicathus and R. silerifolius var. silerifolius, whose genetic distances were zero. rDNA FISH showed that the longest rDNA-chromosome of the tetraploid was similar to that of R. silerifolius var. dolicathus exclusively. Combining trnL-F, ITS and FISH data, it is suggested that the most probable parents of the tetraploid were R. silerifolius var. silerifolius, R. chinensis and R. silerifolius var. dolicathus, among them R. silerifolius var. silerifolius donated most. Evidences from DNA sequences and chromosome FISH indicated that the tetraploid was most probably a homoploid hybrid. Thus, a scenario of the tetraploid formation is proposed: the tetraploid was synthesized by two rounds of hybridization. The first round was between two pairs of diploids, forming two tetraploids. The second round was between the two primary tetraploids, producing the allotetraploid, R. cantoniensis, eventually.     

Hybridization between diploid Centaurea pseudophrygia and tetraploid C. jacea (Asteraceae): the role of mixed pollination,unreduced gametes,and mentor effects

We studied hybridization between the diploid Centaurea pseudophrygia and the tetraploid C. jacea by performing crossing experiments and screening natural populations using flow cytometry. The experiments confirm that the studied species exhibit strong reproductive isolation. Interspecific hybrids were formed at a low frequency, including triploids (originating from reduced gametes) and tetraploids (involving unreduced gametes of the diploids). In contrast, hybrids were almost absent among seeds and adult plants of natural mixed populations and among the offspring from experimental pollinations with a mixture of pollen of both ploidy levels. We found that mixed pollination is an important mechanism for preventing hybridization between plants of different ploidy levels and sustaining the reproduction of the tetraploids. A mentor effect (induced selfing in the presence of pollen of different ploidy levels) was observed in both diploids and tetraploids, reinforcing the reproductive isolation between cytotypes. Higher ploidy levels (pentaploid, hexaploid) involving unreduced gametes of the tetraploid species were identified. Notably, pentaploids were discovered for the first time in Centaurea sect. Jacea. © 2011 The Linnean Society of London, Biological Journal of the Linnean Society, 2011, 104 , 93–106.     

Relationships among genetic distance,forage yield and heterozygosity in isogenic diploid and tetraploid alfalfa populations

Isogenic diploid and tetraploid alfalfa (Medicago sativa L.) was studied with molecular markers to help understand why diploid performance and breeding behavior does not always predict that of tetraploids. In a previous study of partially heterozygous alfalfa genotypes, we detected a low correlation between yields of isogenic diploid (2x) and tetraploid (4x) single-cross progenies, and genetic distances were more highly correlated with yields of tetraploids than diploids. These differences may be related to the level of RFLP heterozygosity expected among progenies derived from heterozygous parents at the two ploidy levels. The objectives of this study were to determine the relationships among genetic distance, forage yield and heterozygosity in isogenic 2 x and 4 x alfalfa populations. Four diploid genotypes were chromosome doubled to produce corresponding isogenic autotetraploids, and these genotypes were mated in 4 × 4 diallels to produce 6 single-cross families at each ploidy level for field evaluation. Allele compositions of parents were determined at 33 RFLP loci by monitoring segregation of homologous restriction fragments among individuals within progenies, and these were used to estimate RFLP heterozygosity levels for all single-cross progenies at both ploidy levels. RFLP heterozygosity rankings were identical between progenies of isogenic diploid and tetraploid parents; but significant associations (P < 0.05) between estimated heterozygosity levels and forage yield were detected only at the tetraploid level. Since tetraploid families were nearly 25% more heterozygous than the corresponding diploid families, inconsistencies in the association between molecular marker diversity and forage yields of isogenic 2 x and 4 x single crosses may be due to recessive alleles that are expressed in diploids but masked in tetraploids. The gene action involved in heterosis may be the same at both ploidy levels; however, tetraploids benefit from greater complementary gene interactions than are possible for equivalent diploids. Present address: AgResearch Grasslands, New Zealand Pastoral Agriculture Research Institute, Palmerston North, New Zealand