Studies on Polychrome Methylene Blue II. Acid Oxidation Methods of Polychroming

The action of K₂Cr₂O₇, Ag₂O, KMnO₄, HgO and NaIO₃ in polychroming methylene blue is explored. The last two have no action in neutral or acid methylene blue solutions. With the other three reagents the amount of polychroming, as measured by the shift in the absorption spectrum, is roughly proportional to the amount of oxidant used. Various lots of methylene blue produce similar products with similar proportions of K₂Cr₂O₇. With similar quantities of this reagent similar products are produced by polychroming at 100°, 80°, 70° or 60° C. At 100° C. the action of K₂Cr₂O₇ or of Ag₂O appears to be completed in 15 minutes. In K₂Cr₂O₇ polychroming, H₂SO₄ can be substituted for HCl, and subsequent BaCO₃ neutralization removes the salts formed and prevents accidental alkali polychroming. K₂Cr₂O₇ polychroming produces products with narrower absorption bands than alkali polychroming.     

A Tungstate Modification of the Golgi-Cox Method

Pieces of fresh nervous tissue 4-5 mm thick are put into the following solution: HgCl₂, 1 gm; K₂Cr₂O₇, 1 gm; K₂CrO₄, 0.8 gm; K₂WO₄ (or Na₂WO₄), 0.5 gm; distilled water 100 ml. They are kept undisturbed in the dark at room temperature for 20-30 days, then transferred to the following alkaline solution: LiOH (or NaOH), 1 gm; KNO₃, 15 gm; distilled water, 100 ml. After 12-24 hr in this solution they are washed for 12-24 hr in several changes of distilled water. (If sodium hydroxide was used, 0.5 ml of acetic acid should be added per 100 ml of wash water.) Embedding in celloidin follows dehydration. Sections are dehydrated in 3 parts of absolute alcohol and 1 part of chloroform, cleared in iodobenzene and mounted with a cover slip using a mounting medium with a refractive index around 1.61. The use of tungstate improves the general results and allows especially successful impregnations in very young animals, when the usual technic fails.     

Correlation of CrystaL Growth with the Staining of Axons by the Golgi Procedure

The surface of the specimens subjected to a modified Golgi technique (formalin fixed material; specimens in the following solution for 8-10 days at 27 C: 3% K₂Cr₂O₇, 100 ml, with the addition of 2.5-10 ml of 10% formalin and 6-25 gm of sucrose; then in 0.75% AgNO₃ for at least 2 days at 27 C) is sometimes covered with a fur of filamentous crystals and sometimes with a powdery precipitate of laminar crystals. In a series of experiments in which about 500 blocks of tissue were treated with variations of the staining procedure, good axonal stain was positively correlated with the appearance of filamentous crystals. These filaments have a thickness of 1-4 μ and grow at a rate of 160-330 μ/hr, reaching a length of 2-7 mm.     

Myelin Impregnation: An Improved Golgi-Cox Modification

Optic tecta of goldfish were coated with egg yolk and immersed for only one week in one of the following impregnation fluids: a) Solution A + B; A = 1 g K₂Cr₂O₇ and 1 g HgCl₂ boiled for 15 min in 85 ml distilled water and allowed to cool; B = 0.8 g K₂Cr₂O₇ and 0.5 g KWO₄ dissolved in 20 ml distilled water, b) Solution A + B two volumes diluted with boiled distilled water, c) Solution A + B four volumes diluted with boiled distilled water. Each tectum was immersed 6 hr in 100 ml distilled water containing 0.5 g LiOH and 15 g KNO₃, washed 18 hr in 500 ml 0.2% acetic acid, dehydrated with ethanol, and embedded in low viscosity nitro cellulose. Sections were cut at 100 pm with a rotary microtome after clearing with cedarwood oil. Methods b) and c) have two advantages compared with method a), the original Golgi-Cox method. First, more cells are impregnated, especially in the layers extending 200-400 μm below the surface, and dendrites as well as unmyelinated axons are well impregnated. Second, myelin sheaths are impregnated and can be recognized by their peculiar chain-like appearance. The described Golgi-Cox modification offers an appropriate method to study the morphology of superficially located nervous tissue.     

A Glutaraldehyde-Dichromate-Silver Sequence for Differentiating Norepinephrine Cells from Epinephrine Cells in Neonatal and Adult Rats—Paraffin Sections

A glutaraldehyde-K₂Cr₂O₇ procedure intensified by silver staining enabled norepinephrine and epinephrine cells to be distinguished readily in paraffin sections of the adrenal glands of rats 8 days after birth. The technique involved fixation in 0.1 M cacodylate-buffered 5% glutaraldehyde (6-24 hr), treatment with 3.5% K₂Cr₂O₇ (6-12 hr) and routine preparation of paraffin sections. The sections were deparaffinised, brought to water and immersed in Fontana's solution (24 hr), prepared by adding concentrated NH₄OH drop by drop to 5% AgNO₃ until the precipitate formed just redissolved; more 5% AgNO₃ was then added until a permanent cloudiness just developed. After a rinse in distilled water, the sections were treated with 0.5% gold chloride (5 min) and Na₂S₂O₃ (5 min), then mounted in Depex. This sequence resulted in an intense black cytoplasmic colouration in norpinephrine-containing cells of both the adult and 8-day-old animals whereas epinephrine-containing cells remained colourless. The glutaraldehyde-K₂CrO₇ procedure, without intensification, gave very clear results in the adult: a yellow cytoplasmic colour in the norepinephrine cells with epinephrine cells colourless. A glutaraldehyde-OsO₄ sequence gave a less well defined separation of these cell types in the adult and failed to distinguish the cell types in the neonate.     

Zinc Chloride Methylene Blue, Ii. Preparation of Giesma and Wright Type Low Azure B Blood Stains from Dichromate Oxidized Commercial Dye

TO determine the amount of K₂Cr₂O₇ required to produce optimal Giemsa type staining, six 1 g amounts (corrected for dye content) of zinc methylene blue were oxidized with graded quantities of K₂Cr₂O₇ to produce 4, 8, 12, 16, 20 and 24% conversion of methylene blue to azure B. These were heated with a blank control 15 minutes at 100 C in 60-65 ml 0.4 N HCI. cooled, and adjusted to 50 ml to give 20 mg original dye/ml. Aliquots were then diluted to 1% and stains were made by the “Wet Giemsa” technic (Lillie and Donaldson 1979) using 6 ml 1% polychrome methylene blue, 4 ml 1% cosin (corrected for dye content), 2 ml 0.1 M pH 6.3 phosphate buffer, 5 ml acetone, and 23 ml distilled water. The main is added last and methanol fixed blood films are stained immediately for 20-40 min.

For methylene blue supplied by MCB 12-H-29, optimal stains were obtained with preparations containing 20 and 24% conversion of methylene blue to azure B. With methylene blue supplied by Aldrich (080787), 16% conversion of methylene blue to azure B was optimal. Eosinates prepared from a low azure B/methylene blue preparation selected in this way give good stains when used as a Wright stain in 0.3% methanol solution. However, when the 600 mg eosinate solution in glycerol methanol is supplemented with 160 mg of the same azure B/methylene blue chloride the mixture fails to perform well. The HCI precipitation of the chloride apparently produces the zinc methylene blue chloride salt which is poorly soluble in alcohol. It appears necessary to have a zinc-free azure B/methylene blue chloride to supplement the probably zinc-free eosinate used in the Giemsa mixture.     

Dichromate-Chlorate Perfusion Prior to Staining Degeneration in Brain and Spinal Cord

A method of fixation compatible with both the Nauta-Gygax and Swank-Davenport procedures for degenerating nerve fibers, which shortens the time required by the former procedure, is as follows: The central nervous system is perfused with a 0.9% aqueous solution of NaCl followed by an aqueous solution containing 5% K₂Cr₂O₇ and 2.5% KClO₃. The central nervous system is then hardened in 10% formalin for 1-3 days. Tissue for Marchi-type staining can be taken at this stage. For silver staining, the processing is continued by immersion overnight in 10% formalin in 20% alcohol, and frozen sections cut the next day. Sections, up to 50μ in thickness, are collected in 10% formalin and impregnated by the Nauta-Gygax technique. Best results are obtained by impregnating within 24-48 hr after sectioning.     

Counterstaining Golgi-Cox Impregnations with Luxol Fast Blue as a Myelin Stain

Immerse pieces of brain tissue 4 wk in solutions A and B, mixed just before use: A. K₂Cr₂O₇, 1 gm; HgCl₂, 1 gm; boiling distilled water, 85 ml. Boil A for 15 min, cool to 2 C and add: B. K₂CrO₄, 0.8 gm; Na₂WO₄, 0.5 gm; distilled water, 20 ml. Rinse in water and immerse 24 hr in LiOH, 0.5 gm; KNO₃, 15 gm; distilled water, 100 ml. Wash 24 hr in several changes of 0.2% acetic acid and then for 2 hr in tap water. Dehydrate and embed in celloidin. Process a 60 μ section through 70 and 95% ethanol, a 3:1 mixture of absolute ethanol and chloroform, and toluene. Immerse it for 5 min in a solution containing methyl benzoate, 25 ml; benzyl alcohol, 100 ml; chloroform, 75 ml. Orient the section on a chemically clean slide and let air-dry 5-10 min. Process through toluene, 3:1 ethanol-chloroform and 95% ethanol. Place the section for 5-60 min at 60 C in a solution made up of: Luxol fast blue G (Matheson, Coleman and Bell), 1 gm; 95% ethanol, 1000 ml; 10% acetic acid, 5 ml. Hydrate to water and immerse in 0.05% Li₂CO₃ for 3-4 min. Differentiate in 70% ethanol and place in water. Immerse for 5-15 min in a mixture of two solutions: A. cresylechtviolet (Otto C. Watzka, Montreal), 2 gm; 1 M acetic acid, 185 ml; B. 1 M sodium acetate, 15 ml; distilled water, 400 ml; absolute ethanol, 200 ml. Dehydrate to 3:1 ethanol-chloroform. Clear in toluene and apply a coverslip. The technique produces fast Golgi-Cox impregnated neurons against a background of counterstained myelinated fibers. Patterns of the myelinated fibers can be used to localize impregnated neurons.     

茄子无土栽培氮磷钾浓度优化施肥方案

本试验采用三因子二次饱和D-最优设计(310),以蛭石为栽培介质,建立了以氮、磷、钾浓度为变量因子,茄子产量和品质为目标函数的三元二次数学模型,以期得到茄子优质高产最优氮磷钾浓度范围.对模型解析结果表明: 氮、磷、钾浓度对茄子产量和品质均有显著影响.对产量和品质的影响程度均以钾浓度较大,对产量的影响程度以氮浓度次之,磷浓度较小,对品质则为磷浓度次之,氮浓度较小.氮磷、氮钾、磷钾浓度交互对茄子产量均有显著影响;氮钾浓度交互对茄子品质亦有显著影响.在低水平条件下,茄子产量和品质均随氮、磷、钾浓度增加而增加,但超过一定范围后,茄子产量和品质均随之降低.通过计算机模拟运算得出,本试验条件下茄子单株产量达3600 g的施肥方案为:氮16.0～20.0 mmol·L^-1、磷2.2～2.6 mmol·L^-1、钾9.9～12.9 mmol·L^-1;品质综合评分在90分以上的施肥方案为:氮18.0～21.1 mmol·L^-1、磷1.9～2.6 mmol·L^-1、钾10.6～13.3 mmol·L^-1.试验小区茄子产量预期达到43.2 kg(6个月生长期)、品质综合评分高达90分以上的优质高产营养液氮磷钾浓度范围为:氮18.0～20.0 mmol·L^-1、磷2.2～2.6 mmol·L^-1、钾10.6～12.6 mmol·L^-1,适宜的N∶P₂O₅∶K₂O浓度比例约为1∶0.13∶0.62.     

The Presence of Lipids But Absence of Tannins in Elodea Idioblasts

The presence of tannins in the idioblasts of Elodea densa is conclusively disproved. Ten reagents for histochemical detection of tannin (K₂Cr₂O₇, K₃Fe(CN)₆, FeCl₃, (NH₄)₂MO₄, Nessler's reagent, Fehling's reagent, methylene blue, gelatin, iodine-KI and lead acetate) gave negative tests in Elodea idioblasts. Two reagents (1% aqueous caffeine and a saturated solution of Ca(OH)₂) gave apparently positive reactions that could be explained by the presence of lipids. Positive tests for lipids were obtained by direct microscopic examination of the removal of lipid materials from freeze-dried leaves, using a 1:1 ether-alcohol mixture. The lipid material was not removed when acetone was substituted for ether-alcohol. A lipoprotein complex was demonstrated by using Serra's method for masked lipids.     

A Copper Sulfate-Silver Nitrate Method for Nerve Fibers of Planarians

For staining in toto, planarians are fixed in a mixture of 10 ml of commercial formalin, 45 ml of 95% ethanol and 2 ml of glacial acetic acid. After treatment with 70% ethanol 3-10 days, they are washed in distilled water and immersed in 10% CuSO₄. 5H₂O for 3 hr at 50° C, transferred without washing to 1% AgNO₃ for 1.0-1.5 hr at 50° C; and then developed in: 10 ml of 1% pyrogallol, 100 ml of 56% ethanol and 1 ml of 0.2% nitric acid. Gold toning, 5% Na₂S₂O₃ and dehydration follow as usual. For staining sections, material is fixed in the same fixative, embedded in paraffin and sectioned at 10 μ. After bringing sections to water, they are immersed in 20% CuSO₄. 5H₂O for 48 hr at 37° C; then rinsed briefly in distilled water and placed in 7% AgNO₃ for 24 hr at 37° C. They are washed briefly in distilled water and reduced in: hydroquincne, 1 gm; Na₂SO₃, 5 gm and distilled water 100 ml. Gold toning, followed by 5% Na₂S₂O₃ and dehydration completes the process. Any counterstaining may follow.     

A Rapid Silver-on-the-Slide Method for Nervous Tissue

A progressive silver staining method is described, which permits microscopic examination of the sections during the staining process. After formaldehyde fixation, dehydration and embedding in paraffin or celloidin, fine fibers and synaptic endings may be demonstrated. After formaldehyde fixation and mordanting in 3% K₂Cr₂O₇, myelinated fibers and mitochondria are specifically stained.

The unique feature of this method is, that the silver solution (0.5% protargol) is mixed with the reducing solution: 1.6% Rochelle salts, containing traces of Ag NO₃, MgSO₄, and K₂S (U.S.P.). The sections are placed directly into this mixture, which is then warmed to 45-55° C. Sections are removed when progressive staining is completed, washed in water, dehydrated and mounted.

In the fiber stain, nerve fibers and synaptic endings are dark brown or black, and nuclear chromatin is deep brown, against a pale yellow background. When the myelin sheath procedure is followed, the fiber bundles are deep brown, and the intensity of the staining remains the same for specific tracts, aiding in their identification.     

A HYDROXYL-DEPENDENT SILVER METHOD FOR NERVE AXOPLASM

Axoplasm is selectively impregnated by the following steps: (1) fixation in 10% formalin or in 10% formalin with added sucrose, 15%, and concentrated NH₄OH, 1%, for 1-7 days; (2) frozen sections; (3) extraction of the sections in 95% ethyl alcohol, absolute alcohol, xylene, and 95% ethyl alcohol and absolute alcohol, 1 hr each; (4) distilled water, 3 changes of 10 min each; (5) 20% AgNO₃ (aq.) at 25°C, 30 min; (6) distilled water, 3 changes of 1-2 sec each; (7) 6.9% K₂CO₃, 1 hr; (8) water, 3 changes of about 1 min each; (9) 0.2%AuCl₃, 2 min; (10) distilled water; (11) 5% Na₂S₂O₃, 2 min; (12) washing, clearing and mounting. This procedure is proposed as a simplified stain for axoplasm, with other tissue components remaining unstained. The few reagents necessary suit this method for histochemical investigation of the mechanism of silver staining.     

Staining of Mitochondria with Aniline-Acid Fuchsin After Zenker-Formol Fixation

It was observed that mitochondria are well-demonstrated by aniline-acid fuchsin staining after Zenker-formol fixation if the sections are not de-Zenkerized. Tests showed that after mordanting in HgCl₂, K₂Cr₂O₇, FeCl₃, or FeSO₄, mitochondria in sections from tissues fixed in neutral buffered formalin could be stained fairly intensely by the same method. Salts of Ag, Ba, Ca, Cd, Co, Cu, Mg, Mn, and Zn were ineffective. If the presence of occasional mercury crystals in the sections is not objectionable, demonstration of mitochondria in Zenkerformol fixed tissues offer speed and additional flexibility in the subsequent use of the blocks as advantages over usual methods.     

Sudan Black and Osmic Acid as Staining Agents for Testicular Interstitial Cells

Two standard cytological techniques have heen modified to stain specifically the interstitial cells of the testis. In Method 1, the tissue is fixed in Zenker-formol or Regaud's fluid for several hours or overnight and subsequently postchromed in 3% K₂Cr₂O₇ for 72 hr at 37°C. After paraffin embedding, sections are cut at 5μ, dewaxed, brought down to 70% alcohol and stained in an unfiltered saturated solution of Sudan black in 70% alcohol for 10-30 min. Sections are washed briefly in 70% alcohol to remove all excess dye, differentiated, if necessary, in 50% alcohol, downgraded to water and mounted in Farrants' medium or glycerol jelly. Interstitial cells: deep blue black; remainder of testicular tissue: light blue. Method 2 is essentially the Champy-Kull technique but specific staining for mitochondria is omitted and the sections are downgraded to water; then they are mounted in Farrants' medium or glycerol jelly without further treatment. In this way osmicated lipoids are preserved. Interstitial cells: conspicuous due to the variable number of black granules in their cytoplasm; the remainder of the tissue: yellow.     

Handling Germinated Pollen on Millipore Membrane During the Feulgen and Autoradiographic Procedures

To prevent loss of pollen during the Feulgen's procedure, the pollen was grown on an autoclaved membrane filter (Millipore AA WP 025 00) in contact with a sterilized medium containing agar 0.5-1%, sucrose according to the genus (Malus 0.3-0.5 M; Persica and Tulipa 0.4 M), and H₃BO₃, 0.01%. To fix the germinated pollen of most species, the membrane was placed for 2 hr to overnight at 2-4 C on filter paper wet with the following mixture: OsO₄, 1 gm; CrO₃, 1.66 gm; and distilled water, 233 ml. To fix Persica pollen, 10% of glacial acetic acid had to be added to the fixative. Washing with distilled water and bleaching with a mixture of 3% H₂O₂ and sat. aq. ammonium oxalate, 1:1, were performed also on filter paper. Similarly, the preparation was processed for Feulgen staining by use of pieces of filter paper wet with the required fluids. Hydrolysis preceding the Schiff's reagent was performed at room temperature with 5 N HCl for 18 min. The differentiation after the Schiff's action was with 2% K₂S₂O₅ buffered to pH 2.3 with 9 ml of phosphate buffer (KH₂PO₄, 1.4 gm; conc. HCl, 0.35 ml and distilled water to make 100 ml). The stained pollen was floated off the membrane with a drop of glacial acetic acid to a gelatinized or an albumenized slide, and squashed. When the coverslip is removed the preparation may be either dehydrated and mounted or coated with autoradiographic film.     

Staining of Oligodendroglia with Silver Ammino Tungstate in Unembedded and Embedded Material

Specimens of brain or spinal cord fixed in formalin, Cajal's formol-bromide, or Koenig, Groat and Windle's formalin-acacia can be used to stain oligodendrocytes in frozen, in paraffin, or in celloidin sections. The sections are soaked 3-5 min in 0.02% acetic acid, pH 3.4, then rinsed 2-3 sec in 3% H₂O₂ and transferred to a silver bath prepared as follows: Mix equal parts of 10% AgNO₃ and 10% Na₂WO₄, and dissolve the precipitate with concentrated NH₄OH; avoid an excess of ammonia. Silver at room temperature for 15-20 sec, develop in 1% formalin, dehydrate, and mount. For embedded material, prepare a mixture consisting of 1 part of 10% aqueous Aerosol MA and 4 parts of 10% Aerosol OT in 95% alcohol. Add 5 drops of this mixture to each 50 ml of dilute acetic acid and 3% H₂O₂; 5 drops to each 20 ml of the silver bath.     

Enhanced Reliability in Silver Impregnation of Terminal Axonal Degeneration-Original Nauta Method

Brains of rat with surgical lesions 3-5 days old are fixed in 10% neutralized formalin (excess of CaCO₃), 20 μ serial frozen sections cut therefrom and kept in neutralized formalin for an additional 24-48 hr. The sections are soaked in distilled water 12-24 hr, transferred to 50% alcohol containing 0.75 ml of concentrated NH₄OH (sp. gr. 0.91) per 100 ml 12-24 hr, placed in distilled water 2-3 hr and then in silver-pyridine solution (AgNO₃ 3% aq., 20 ml; pyridine, 1 ml) for 48 hr. Test sections are transferred directly to each one of 3 ammoniated silver-solutions, pH 12.8, 13.0 and 13.2, made as follows: To 200 ml of solution 1 (silver nitrate, 6.4 gm; alcohol 96%, 220 ml; NH₄OH (sp. gr. 0.91), 28 ml and distilled water, 440 ml) is added respectively 8-12 ml, 12-16 ml and 16-20 ml of solution 2 (2% NaOH) to give the pH desired. The test sections are studied and the optimal ammoniated silver solution chosen. Two baths of ammoniated silver are used, the section placed with continuous agitation into the first bath for 30 sec and the second bath for 60 sec. The sections are then transferred directly into a reducing bath (formalin 10%, 2ml; alcohol 96%, 5 ml; citric acid 1%, 1.5 ml and distilled water, 4.5 ml) for 2 min and from there to 5% Na₂S₂O₃ for 1 min, rinsed in 3 changes of distilled water, dehydrated and mounted.     

The Use of Dimethylsulfoxide for Fixation of Yeasts for Electron Microscopy

Conventional methods of chemical fixation are often inadequate for preserving yeast ultrastructure. The thick cell wall severely limits penetration of fixatives rendering poor detail of the cell wall, membranes, and overall anatomy. Dimethylsulfoxide (DMSO) enhances penetration of chemicals and has been added to fixatives to improve cell preservation. At high concentrations (5 to 50%), however, it affects ultrastructure unpredictably. We found that adding 0.1% DMSO to fixatives greatly improved retention of yeast ultrastructure. Candida albicans, C. glabrata and Aspergillusfumigatus were fixed for 3 hr in 3% paraformaldehyde, 1% glutaraldehyde, 1 mil MgCl₂, 1 mM CaCl₂, 0.1% DMSO in 0.1 M sodium cacodylate buffer followed by 1% OsO₄, 1% K₂Cr₂O₇, 0.85% NaCl. 0.1% DMSO in the same buffer. Thin epoxy sections were post-stained in uranyl acetate and lead citrate. The multilayered character of the cell wall was distinct and well structured. Addition of ruthenium red or alcian blue to the fixatives further enhanced the outer fibrillar layer. The plasma membrane was contiguous and tightly adjacent to the inner manno-protein layer of the cell wall. The cytoplasm was well preserved and the overall preservation of the yeast ultrastructure was significantly improved.     

Triple Silver Impregnation for Selective Staining of Avian Nerves

Frozen sections of avian tissue fixed 7 days or longer in 10% formalin or formol-saline are cut at 20-50 μ, left in distilled water for 2 hr, and placed in 0.002% aqueous AgNO₃ for 3-4 days. Subsequent procedure is essentially that of Weddell and Glees. Sections are placed in 20% AgNO₃ for 30 min, then carried through 3 baths of 3% formalin in less than 10 min. Immediately thereafter they are washed 1-2 sec in a 0.1% solution of NH₄OH (cone) and placed in the ammoniacal silver solution (made with 20% AgNO₃) until the nerves become distinct, as seen under a microscope; usually, in about 15 min. After washing briefly, the sections are fixed in 5% Na₂S₂O₃ for 3-10 min, dehydrated, cleared, and mounted in the usual way.