Ruthenium complexes of furan- and thiophene-thiolates: Structure of CpRu(dppe)SThi

Complexes of ruthenium containing 2-furan- and 2-thiophene-thiolates with phosphine ligands have been prepared and characterized. The bis(triphenylphosphine) complexes CpRu(PPh₃)₂SR (R = C₄H₃O: Fu (1a), C₄H₃S: Thi (1b)) were prepared by the reaction of thiolato anions (FuS^? or ThiS^?) with CpRu(PPh₃)₂Cl. The one-pot reaction of CpRu(PPh₃)₂Cl, thiolato anions and L ligands gave CpRu(L)SR (L = bis(diphenylphosphino)methane: dppm (2); bis(diphenylphosphino)ethane: dppe (3)). The newly prepared complexes have been characterized by spectroscopic techniques (FT-IR, ¹H NMR and ³¹P NMR) and by elemental analysis. The crystal structure of CpRu(dppe)SThi (3b) has been determined by X-ray diffraction.     

Synthesis, structures and spectroscopic properties of new 1,2-bis[2-(4-methyl-7-acetylamino-1,8-naphthyridine)]ethylene ligand and its binuclear copper(I) complexes

The synthesis, characterization, spectroscopic properties of a new ligand 1,2-bis[2-(4-methyl-7-acetylamino-1,8-naphthyridine)]ethylene (L) and its two binuclear Cu(I) complexes containing triphenylphosphine (PPh₃) or bis(diphenylphosphino)methane (dppm), [Cu₂(L)(PPh₃)₄](BF₄)₂·2CH₂Cl₂ (1·2CH₂Cl₂) and [Cu₂(L)(dppm)₂](BF₄)₂·4H₂O (2·4H₂O) are reported. The structural investigation of these compounds based on X-ray crystal analysis shows that the copper(I) centers adopt different coordination geometries, O(N)CuP₂⁺ and NCuP₂⁺ for complexes 1 and 2, respectively. Upon irradiation of a degassed organic solution of L at 365 nm, photoinduced isomerization reaction and an intramolecular proton transfer of ligand L were detailed studied by absorption spectral changes. A spectroscopic investigation involving time-dependent density functional theory calculations allows assignment of the excited states that relate to emission and transient absorption spectra. The observed lower-energy absorption bands appearing in the region of 413 and 418 nm for 1 and 2 in dichloromethane are assigned to ligand-to-ligand charge transfer (LLCT, phosphine → napy) transition in nature. Compared with well-structured solid-state emission originating from ππ^∗ transition of ligand L, complexes 1 and 2 exhibit intense room-temperature solid-state emissions with λ_max at 586 and 620 nm, respectively. The energy and the shape of the emission bands are clearly different from that of the ligand, indicating the emissions come from different excited states.     

The synthesis, structure, and luminescence of two silver(I)-dppm complexes based on sulfate anion and nitrogen heterocyclic ligands

At ambient temperature, two silver(I) complexes [Ag₄(SO₄)₂(dppm)₄]·5CH₃CH₂OH·1/2H₂O (1) and [Ag₂(SO₄)(dppm)₂(2-ampz)]·CH₃OH·H₂O (2) (dppm = bis(diphenylphosphino)methane, 2-ampz = 2-aminopyrazine) were obtained by the reaction of Ag₂SO₄ with dppm in the presence of pyrazine or 2-aminopyrazine. They are characterized by IR, X-ray crystallography, luminescence and ¹H, ³¹P NMR spectroscopy. Complex 1 is a tetranuclear cluster. In complex 2, the units [Ag₂(SO₄)(dppm)₂] are connected by 2-aminopyrazine to form a 1D linear polymer. Due to the subtle interactions of different nitrogen heterocyclic ligands with silver ions, two SO₄²⁻ anions in 1 adopt μ₃-O, O′, O′ and unique μ₄-O, O, O′, O′ bonding modes respectively, while SO₄²⁻ anion in 2 adopts μ-O, O′ bonding mode.     

The synthesis, structure and luminescence of two 1D pyrazine-connected Cu(I)-dppm polymers

Two pyrazine-connected 1D copper(I) dppm polymers, {[Cu₃(dppm)₃Br₂][Cu₂(dppm)(pyz)Br₂] Br · (CH₃OH)₂}_n (1) and {[Cu₂(dppm)₂(NO₃)₂(pyz)](pyz)}_n (2) (dppm = bis(diphenylphosphino)methane, pyz = pyrazine) have been synthesized and characterized by X-ray crystallography, luminescence, IR, ¹H, and ³¹P NMR. Structure analysis shows that complex 1 is a neutral 1D polymer in sine-curve-like form, while complex 2 is in linear form. And photoluminescent study of them shows that they exhibit fluorescent emission bands at ca. 434 nm and 431 nm, respectively.     

Thiolato-bridged “Linear” trinuclear platinum complexes [Pt3(μ-SR)4(dppm)2]

Thiolato-bridged tri- and dinuclear platinum complexes of the types [Pt₃(μ-SR)₄(dppm)₂]²⁺ (1) and [Pt₂(μ-ER)₂(dppm)₂]²⁺ (2) (E=S or Se; R=alkyl or aryl; dppm=bis(diphenylphosphino)methane) have been prepared using the mononuclear precursors [Pt(ER)₂(dppm)]. The complexes have been characterized by NMR (¹H, ¹³C, ³¹P, ¹⁹⁵Pt), FT-IR and FAB mass spectral data. The structure of [Pt₃(μ-SC₆H₄CH₃-4)₄(dppm)₂][CF₃SO₃]₂ · 6CH₂Cl₂ (1d), has been established through X-ray crystallography, revealing a zig-zag arrangement of the three coordination spheres around the platinum atoms.     

Chain-transfer catalysis by vanadium complexes during methyl methacrylate polymerization

A series of V(CO)₄(P-P) or HV(CO)₄(P-P) ((P-P) = bis(diphenylphosphino)methane (dppm), 1,2-bis(diphenylphosphino)ethane (dppe), 1,3-bis(diphenylphosphino)propane (dppp), and 1,4-bis(diphenylphosphino)butane (dppb)) complexes have been tested as chain-transfer catalysts for methyl methacrylate (MMA) polymerization. The chain transfer constants C_s (=k_tr/k_p), determined by Mayo plots, suggest that V(CO)₄(dppe) is the most efficient chain-transfer catalyst among the complexes investigated (C_s = 750 at 70 °C).     

Insertion reactions of organic anhydrides into the M-O bond of CuOBu and Sb(OMe)3

The synthesis and structural characterization of the copper salts [Cu₂(2-Boc-benzoate)₄(dme)₂] (1), [Cu(2-Boc-benzoate)₂(tmeda)] (2), [Cu₂(2-Boc-benzoate)₂(dppm)] (3), [Cu(2-Boc-nicotinate)(PPh₃)₂] (4), [Cu₂{2-Boc-5,6-anhydride-naphthylcarboxylate}₂(dppm)₂] (5) [dme = 1,2-dimethoxyethane, dppm = bis(diphenylphosphino)methane, tmeda = N,N′-tetramethylethylenediamine, Boc = tert-butoxycarbonyl] prove that cyclic organic anhydrides and dianhydrides readily insert into the Cu-O bond of [CuO^tBu] forming carboxylate ligands with ester functionalities in the ligand periphery. [Sb(CO₂Ph-o-CO₂Me)₂(OMe)(tmeda)] (6) was synthesised by insertion reaction of Sb(OMe)₃ with phthalic anhydride.     

Diphosphines as bridging ligands in polymeric and dimeric thione-S-ligated Ag(I) nitrate complexes

Reactions of silver(I) nitrate with equimolar amounts of the diphos ligands 1,4-bis(diphenylphosphino)butane (dppb) or 1,2-bis(diphenylphosphino)ethane (dppe) and some heterocyclic thiones (L) in acetonitrile/methanol solvent afforded mixed-ligand complexes, the nature of which was found to be strongly influenced by the backbone length of the diphosphine ligand. The longer chained diphos ligand formed a series of dinuclear complexes of the type [Ag(dppb)(L)]₂(NO₃)₂ with both the diphosphine and thione ligands acting as bridging ligands between the two four-coordinate pseudo-tetrahedrally coordinated metal centers. In the unique case of L=4-methyl-5-trifluoromethyl-4H-1,2,4-triazoline-3(2H)-thione (mftztH), the reaction proceeded under exclusion of the thione ligand from the coordination sphere and coordination of the nitrate anions instead, leading to the diphosphine-doubly bridged dimeric compound [Ag(dppb)(NO₃)]₂. On the other hand, the complexes produced when using the short bite 1,2-bis(diphenylphosphino)ethane (dppe) turned out to be diphosphine-bridged cationic polymers of the type [Ag(dppe)(L)₂]_n(NO₃)_n. The structures of one representative for each of the two aforementioned series of complex compounds, namely [Ag(dppb)(py2SH)]₂(NO₃)₂ · 2H₂O and [Ag(dppe)(pymtH)₂]_n(NO₃)_n, have been established by single-crystal X-ray diffraction.     

The synthesis, structure, and characterization of three novel 1D nitrogen-heterocyclic copper(I)-diphosphine polymers

At ambient temperature, three 1D nitrogen-heterocyclic Cu(I)-diphosphine polymers, {[Cu₂(dppm)₂(BF₄)₂(pyz)](CH₂Cl₂)₂}_n (1), {[Cu₂(dppm)₂(4,4′-bpy)(CF₃SO₃)](CF₃SO₃)(CH₃OH)}_n (2), {[Cu₂(dppe)₂ (phen)₂](ClO₄)₂(CH₂Cl₂)}_n (3) (dppm = bis(diphenylphosphino)methane, dppe = bis(diphenylphosphino)ethane, pyz = pyrazine, 4,4′-bpy = 4,4′-bipyridine, phen = 1,10-phenanthroline) have been synthesized and characterized by X-ray crystallography, luminescence, IR, ¹H, and ³¹P NMR. Structure analysis shows that 1 is a 1D linear polymer, 2 is a 1D stair-shaped polymer, and 3 is a 1D W-shaped polymer. A photoluminescent study of them shows that they exhibit fluorescent emission bands at ca. 555 nm, 535 nm and 557 nm, respectively.     

Synthesis of cyclopentadienyl ruthenium complexes containing 5-membered N-heterocyclic thiolates

Mononuclear ruthenium-thiolate complexes of structural type CpRu(PPh₃)₂SR (1) [R = 2-imidazolyl (a), 1-methylimidazolyl (b), 5-methyl-1,3,5-thiadiazolyl (c) and 5-methyl-4H-1,2,4-triazolyl (d)] are accessible from the reaction of CpRu(PPh₃)₂Cl with the corresponding thiolate anions. Reaction of CpRu(PPh₃)₂Cl with the heterocyclic-thiolate anions in the presence of the bisphosphine ligands affords CpRu(P-P)SR [P-P = bis(diphenylphosphino)methane; dppm (2), bis(diphenylphosphino)ethane; dppe (3)]. If CO gas was bubbled through a THF solution of 1b, the complex CpRu(PPh₃)(CO)S(C₄N₂H₅) (4b) is produced. These ruthenium-heterocyclic thiolate complexes have been characterized by elemental analysis, spectroscopy (IR, ¹H, ³¹P{¹H} NMR and MS) and cyclic voltammetry for some samples. The solid-state structures of 3a and 3b are determined by single-crystal X-ray structure analysis.     

Synthesis and characterization of Cr,Mo and W carbonyl complexes of bis(2-(diphenylphosphino)ethyl)benzylamine

Various Cr, Mo and W carbonyl complexes of a tridentate ligand containing N and P as donor atoms, bis(2-(diphenylphosphino)ethyl)benzylamine (DPBA), have been synthesized. Reaction of M(CO)₆ (M = Cr, Mo and W) with DPBA in a 1:1 mole ratio in toluene or xylene, resulted in the formation of facial and meridional complexes of the type [M(CO)₃(DPBA)] (M = Cr, Mo and W). Interaction of Cr(CO)₆ or Mo(CO)₆ with DPBA and PPh₃ in toluene yielded complexes of the composition [Cr(CO)₃(DPBA)(PPh₃)] and [Mo(CO)₂(DPBA)(PPh₃)], respectively. However reaction of W(CO)₆ with DPBA and PPh₃ yielded only [W(CO)₃(DPBA)]. Reaction of Cr(CO)₆ with DPBA and 1,2-bis(diphenylphosphino)ethane(diphos) in toluene for 24 h resulted in the formation of a mixed ligand complex, [Cr(CO)₄(DPBA)(diphos)] where both the ligands coordinate to the metal atom through only one of their donor atoms. A unique binuclear complex of the composition [Mo(CO)₂(DPBA)(diphos)]₂ resulted, with the tridentate ligand DPBA acting as a bidentate bridging ligand, by the reaction of Mo(CO)₆ with DPBA and diphos in refluxing xylene for 24 h. All the complexes are characterized by elemental analysis and infrared spectra. The ³¹P{¹H} and ¹H NMR spectral data of the complexes gave valuable information in elucidating the structures of the complexes. The ligand DPBA has found to behave in a triligate monometallic, biligate monometallic, monoligate monometallic and biligate bimetallic manner.     

Gold(I) and silver(I) complexes of 2,3-bis(diphenylphosphino)maleic acid: Structural studies and antitumour activity

The 2:1 and 1:2 adducts of Au(I) and 1:2 adducts of Ag(I) with the diphosphine 2,3-bis(diphenylphosphino)maleic acid (dpmaa) have been prepared in high yields. Crystal structures have been determined for the neutral digold complex (AuCl)₂(dpmaa) · 2thf (1) and the bis-chelated complex [Au(dpmaa)₂]Cl · H₂O · CH₃OH (2). For 1, conformational rigidity imposed by the ethylenic bridge facilitates the formation of short intramolecular Au-Au contacts with no evidence of similar intermolecular contacts. Complex 2 crystallizes with [Au(dpmaa)₂]⁺ cations hydrogen bonded through the carboxyl groups to a water molecule and chloride anion to form a H-bonded chain along the a axis. ³¹P NMR titration of 1 with dpmaa in acetone shows conversion to 2 at Au:P-P ratios less than 1:1 indicating similar high thermodynamic and kinetic stabilities to other bis-chelated [Au(P-P)₂]⁺ complexes containing 5- or 6-membered chelate rings. The ionic Au(I) complex 2 and the analogous Ag(I) complex [Ag(dpmma)₂]NO₃ (3) are highly water soluble. The in vitro cytotoxic activity of 2 was assessed against eight different cell lines and no significant activity was found. The solubility properties and solution behaviour of the complexes are compared to the analogous 1,2-bis(diphenylphosphino)ethane (dppe) complexes and the potential significance of these results to the antitumour properties of chelated 1:2 Au(I)diphosphine complexes are discussed.     

Dinuclear copper(I) complexes containing diimine and phosphine ligands: Synthesis, copper-copper separation and photophysical properties

Dinuclear copper(I) complexes with bridging bis(dicyclohexylphosphino)methane (dcpm) or bis(diphenylphosphino)methane (dppm) and 2,2′-bipyridine or 2-[N-(2-pyridyl)methyl]amino-5,7-dimethyl-1,8-naphthyridine (L), [Cu₂(bpy)₂(dppm)₂](BF₄)₂ (1), [Cu₂(bpy)₂(dcpm)](BF₄)₂ (2), [Cu₂(L)(dppm)](BF₄)₂ (3) and [Cu₂(L)(dcpm)](BF₄)₂ (4) were prepared, and their structures were determined by X-ray crystal analysis. Two-, three-, and four-coordinate copper(I) centers are found in these complexes. Compounds 3 and 4 show close Cu^I?Cu^I separations of 2.664(3) and 2.674(1) Å, respectively, whereas an intramolecular copper-copper distance of 3.038 Å is found in 2 having only dcpm as an additional bridge. Powdered samples of 1, 3, and 4 display intense and long-lived phosphorescence with λ_max at 533, 575, and 585 nm at room temperature, respectively. In the solid state, 2 exhibits only a weak emission at 555 nm. The time-resolved absorption and emission spectra of these complexes were investigated. The difference in the emission properties among complexes 1-4 suggests that both Cu^I?Cu^I distances and coordination environment of the copper(I) centers affect the excited-state properties.     

Luminescent phosphinocrown-containing gold(I) complexes: Their syntheses, spectroscopic studies and host-guest chemistry

A series of phosphinocrown ether-containing gold(I) complexes, [Au(Ph₂P-b15c5)Cl] (1), [Au₂(μ-i-mnt)(Ph₂P-b15c5)₂] (2) and [Au₂(μ-dtc)(Ph₂P-b15c5)₂](PF₆) (3) (b15c5 = benzo-15-crown-5, i-mnt²⁻ = 1,1-dicyanoethylene-2,2-dithiolate, dtc⁻ = diethyldithiocarbamate) have been synthesized. Complexes 2 and 3 · NaPF₆ have also been structurally characterized. The emission bands at ca. 500-515 nm for 2 and 3 upon photo-excitation are tentatively assigned as derived from excited states of S → Au ligand-to-metal charge transfer (LMCT) origin. These complexes have been shown to serve as host for the specific binding of various metal cations.     

Reactivity of [PdCl(μ-med)]2 with monodentate or bidentate ligands. Structure of the dinuclear complexes [Pd(μ-med)(PPh3)]2(BF4)2 and [Pd(μ-med)(bpy)]2(BF4)2. [Hmed=N-(2-mercaptoethyl)-3,5-dimethylpyrazole]

Treatment of the ligand N-(2-mercaptoethyl)-3,5-dimethylpyrazole with [Pd(CH₃COO)₂]₃ and reaction of [PdCl(μ-med)]₂ with pyridine (py) or triphenylphosphine (PPh₃) in the presence of AgBF₄ produced the following complexes: [Pd(CH₃COO)(μ-med)]₂, [Pd(μ-med)(py)]₂(BF₄)₂ and [Pd(μ-med)(PPh₃)]₂(BF₄)₂. Similar reactions carried out with 2,2^′-bipyridine (bpy) or 1,3-bis(diphenylphosphino)propane (dppp) produced [Pd(μ-med)(bpy)]_x(BF₄)_x (x=1 or 2) and [Pd(μ-med)(dppp)]_x(BF₄)_x (x=1 or 2). Treatment of [Pd(μ-med)(bpy)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced [Pd₃Cl₂(μ-med)₂(bpy)₂](BF₄)₂. Treatment of [Pd(μ-med)(dppp)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced a mixture of [Pd(μ-Cl)(dppp)]₂(BF₄)₂ and [Pd(μ-med)₂(dppp)]²⁺. X-ray crystal structures of [Pd(μ-med)(PPh₃)]₂(BF₄)₂ · 2CH₃CN and [Pd(μ-med)(bpy)]₂(BF₄)₂ · 0.5CH₃OH are presented.     

Reactions of 2-thiopyridone rhodium(III) complexes with tertiary phosphines

The rhodium(III) complexes containing 2-thiopyridone (pySH) and its conjugate anion 2-thiopyridonato (pyS) as the only ligands, [Rh(pyS)₂(pySH)₂]Cl, [Rh(pyS)₃(pySH)], and [Rh(pyS)₃], react with the tertiary phosphines PMe₂Ph, PPh₃, Ph₂PCH₂PPh₂ (dppm), and Ph₂PCH₂CH₂PPh₂ (dppe) to give mixed pyS/tertiary phosphine complexes of the type [Rh(pyS)₃L], [Rh(pyS)₃L₂], and [Rh(pyS)₂L₂]ClO₄ where L represents a single phosphorus donor atom. These compounds were characterized mainly by ¹H and ³¹P NMR spectroscopy.     

Heptacoordinate dithiophosphate W(II) and Mo(II) complexes of diphosphines and iodide

New complexes [MI(CO)₂(dppe){S₂P(OEt)₂}] (M=W, 1a; M=Mo, 1b), [MI(CO)₂(dppm){S₂P(OEt)₂}] (M=W, 2a; M=Mo, 2b) and [W(CO)(dppe){S₂P(OEt)₂}₂][O₂dppe] (3a), were synthesised from [MI₂(CO)₃(NCMe)₂] (M=Mo, W), after treatment with ammonium diethyldithiophosphate and phosphine under different conditions. The structure of the tungsten complexes was determined by single crystal X-ray diffraction. During the synthesis of 3a, oxidation of the phosphine took place and a molecule of oxidised phosphine occupies channels in the crystal. DFT/B3LYP calculations on models of 1a and 2a showed the capped octahedron structure, observed in most dicarbonyl complexes of this family, to be preferred by 1.4 and 2.6 kcal mol⁻¹ for the dppm and the dppe complexes, respectively. Strong steric repulsions can reverse this trend, as happens with the rigid dppm ligand. Complex 1a adopts a pentagonal bipyramidal geometry, which is often found in related monocarbonyl complexes.     

Rh and Ir dibenzo[a,e]cyclooctatetraene complexes: Chloro, hydroxo, and mixed Au oxo complexes

New and improved procedures are reported for the synthesis of [M(DBCOT)(μ-Cl)]₂ (M = Rh, Ir; DBCOT = dibenzo[a,e]cyclooctatetraene) from MCl₃(H₂O)_x or [M(COD)(μ-Cl)]₂ and DBCOT. Treatment of [M(DBCOT)(μ-Cl)]₂ with [(LAu)₃(μ-O)]BF₄(L = PPh₃, P^tBu₃) yields the mixed-metal oxo complexes [M(DBCOT)(μ⁴-O)(AuL)₂]₂(BF₄)₂. Dimeric [Rh(DBCOT)(μ-OH)]₂ is obtained from the reaction of [M(DBCOT)(μ-Cl)]₂ with KOH in EtOH/H₂O. All complexes except [Rh(DBCOT)(μ-Cl)]₂ have been structurally characterized by single crystal X-ray diffraction.     

Synthesis and structural characterization of gold(III) dioximates with anions [AuCl4] and [AuCl2]

Two complexes of Au(III) with dimethylglyoxime of compositions [Au^III(HDMG)₂][Au^IIICl₄] (1) and [Au^III(HDMG)₂][Au^ICl₂] (2) were synthesized and characterized by X-ray structural analysis. It was shown that in [Au^III(HDMG)₂]⁺ cation Au(III) has a square-planar environment, and the oxygen atoms of oxime groups are joined by intramolecular H-bond. The secondary Au?Au and Au?Cl interactions in the crystal are discussed.     

The reactivity of [Pt2(μ-S)2(PPh3)4] towards difunctional chloroacetamide alkylating agents: Formation of cyclized or bridged products

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] towards some bis(chloroacetamide) alkylating agents have been investigated. Reaction with one mole equivalent of the hydrazine-derived compound ClCH₂C(O)NHNHC(O)CH₂Cl led to the cyclized product [Pt₂{SCH₂C(O)NHNHC(O)CH₂S}(PPh₃)₄]²⁺ which showed two different PPh₃ environments in the ³¹P{¹H} NMR spectrum, as a result of non-fluxional behavior of the dithiolate ligand in solution. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the ortho and para isomers of the phenylenediamine-derived bis(chloroacetamides) ClCH₂C(O)NHC₆H₄NHC(O)CH₂Cl gave tetrametallic complexes containing two {Pt₂S₂} moieties spanned by the CH₂C(O)NHC₆H₄NHC(O)CH₂ group. Both the ortho and para isomers were crystallographically characterized; in the ortho isomer there is intramolecular CO···H-N and S···H-N hydrogen bonding involving the two amide groups.