Mono- and dinuclear (o-thioetherphenolato)-copper(II) complexes. Structural models for galactose oxidase

Three new o-thioetherphenol ligands have been synthesized: 1,2-bis(3,5-di-tert-butyl-2-hydroxyphenylsulfanyl)ethane (H₂bse), 1,2-bis(3,5-di-tert-butyl-2-hydroxyphenylsulfanyl)benzene (H₂bsb), and 4,6-di-tert-butyl-2-phenylsulfanylphenol (Hpsp). Their complexes with copper(II) were prepared and investigated by UV-Vis-, EPR-spectroscopy; their electro- and magnetochemistry have also been studied: [Cu^II(psp)₂] (1), [Cu^II₂(bse)₂] (2), [Cu^II₂(bsb)₂] (3), [Cu^II(bsb)(py)₂] (4). The crystal structures of the ligands H₂bse, H₂bsb, Hpsp and of the complexes 1, 2, 3, 4 have been determined by X-ray crystallography.     

Spectral properties and bio-activity of copper(II) clofibriates, part III: crystal structure of Cu(clofibriate)2(2-pyridylmethanol)2, Cu(clofibriate)2(4-pyridylmethanol)2(H2O) dihydrate, and Cu2(clofibriate)4(N,N-diethylnicotinamide)2

New copper(II) clofibriates (clof, {2-(4-chlorophenoxy)-2-methylpropionic or 2-(4-chlorophenoxy)isobutyric acid}) of composition Cu(clof)₂L₂ (where L=2-pyridylmethanol (2-pymeth) (1), N-methylnicotinamide (Menia) (4), N,N-diethylnicotinamide (Et₂nia) (5), isonicotinamide (isonia) (7) or methyl-3-pyridylcarbamate (mpc) (8)), [Cu(clof)₂(4-pymeth)₂(H₂O)] · 2H₂O (4-pymeth=4-pyridylmethanol) (2 · 2H₂O) and Cu(clof)₂L (where L=4-pymeth (3) or Et₂nia (6)) have been prepared and spectroscopically characterized. All the Cu(clof)₂L₂ compounds seem to possess distorted octahedral copper(II) stereochemistry with differing tetragonal distortions. An X-ray analysis of 1 was carried out and it featured a tetragonal-bipyramidal geometry around the copper(II) atom. X-ray analysis of 2 · 2H₂O featured a square-pyramidal geometry around copper(II) atom. Both the Cu(clof)₂L compounds seem to consist of a binuclear unit of tetracarboxylate type bridging. An X-ray analysis of 6 revealed typical binuclear paddle-wheel type structure, consisting of two copper(II) atoms in square-pyramidal geometry bridged by four carboxylate anions in the xy-plane. All complexes under study were characterized by EPR and electronic spectroscopy. The antimicrobial effects have been tested on various strains of bacteria, yeasts and filamentous fungi.     

Analysis of the main structural trends for biscyclometalated dinuclear rhodium compounds of general formula Rh2(O2CR)2(PC)2 · 2H2O

A new series of biscyclometalated dinuclear rhodium (II) compounds with the general formula Rh₂(O₂CR)₂(PC)₂ · 2H₂O, being PC = (C₆H₄)P(C₆H₅)₂, R = CH₃ (1 · 2H₂O), PC = [(p-CH₃ OC₆H₃)P(p-CH₃ OC₆H₄)₂], R = CF₃ (2 · 2H₂O), PC = (C₆H₄)P[CH(CH₃)₂]₂, R = CH₃ (3 · 2H₂O) and PC = (C₆H₄)P(C₆H₅)₂, R = C₆F₅ (4 · 2H₂O) has been obtained. The crystal structures for these compounds have been determined by X-ray diffraction and the main structural trends, bond lengths, bond angles and torsion angles have been analyzed, and have also been compared with the structural parameters for different analogous complexes described previously in the literature.     

Synthesis, structure and properties of TTF-carboxylate bridged paddlewheel dirhodium complexes, Rh2(BuCO2)3(TTFCO2) and Rh2(BuCO2)2(TTFCO2)2

Reaction of tetrathiafulvalene carboxylic acid (TTFCO₂H) with paddlewheel dirhodium complex Rh₂(Bu^tCO₂)₄ yielded TTFCO₂-bridged complexes Rh₂(Bu^tCO₂)₃(TTFCO₂) (1) and cis- and trans-Rh₂(Bu^tCO₂)₂(TTFCO₂)₂ (cis- and trans-2). Their triethylamine adducts [1(NEt₃)₂] and cis-[2(NEt₃)₂] were purified and isolated with chromatographic separation, and characterized with single crystal X-ray analysis. Trans-[2(NEt₃)₂] is not completely separated from a mixture of cis- and trans-[2(NEt₃)₂], but its single crystals were obtained from a solution of the mixture. A three-step quasi-reversible oxidation process was observed for 1 in MeCN. The first two steps correspond to the oxidation of the TTFCO₂ moiety and the last one is the oxidation of the Rh₂ core. The oxidation of cis-2 is observed as a two-step process with very similar E_1/2 values to those of the first two processes for 1. Both 1⁺ and cis-2²⁺ in MeCN at room temperature show isotropic ESR spectra with a g value of 2.008 and a_H = 0.135 mT for two equivalent H atoms and a_H = 0.068 mT for one H atom. The redox and ESR data of cis-2 suggest that the intramolecular interaction between the TTF moieties is very small.     

Versatile coordination behaviour of Ph2AsCH2AsPh2 with Ru(II)

Treatment of ‘RuCl₃ · 3H₂O’ with Ph₂AsCH₂AsPh₂ (dpam) in hot EtOH gives either trans-[RuCl₂(dpam-As,As′)(dpam-As)₂] (1), or cis-[RuCl₂(dpam-As,As′)₂] (2), depending on the mole ratio. On exposure to light, solutions of 2 isomerise to trans-[RuCl₂(dpam-As,As′)₂] (3). Treatment of [RuCl₂(PPh₃)₃] with two equivalents of dpam in CH₂Cl₂ gave a mixture of two products, from which trans-[RuCl₂(PPh₃) (dpam-As,As′)(dpam-As)] (4) was isolated by recrystallisation. The crystal structures of 1-4 are reported. Complexes 1-3 in CH₂Cl₂ undergo electrochemical oxidation to Ru(III), and the Ru(III) form of 2 undergoes isomerisation on the voltammetric timescale to the Ru(III) form of 3.     

New aryl phosphinite ligands avoiding ortho-metallation: Synthesis and molecular structures of trans-[PdCl2(PPh2OR)2] and trans-[Rh(CO)Cl(PPh2OR)2] (R = 2,4,6-Me3C6H2; 2,6-Ph2C6H3)

The new aryl phosphinites PPh₂OR (R = 2,4,6-Me₃C₆H₂, 1; R = 2,6-Ph₂C₆H₃, 2) have been prepared from chlorodiphenylphosphine and the corresponding phenols. In these ligands, the ortho-positions of the aromatic phosphite function are blocked by methyl and phenyl substituents, which allows coordination to metal centres without ortho-metallation. Thus, reaction with [PdCl₂(cod)] leads to the complexes trans-[PdCl₂(PPh₂OR)₂] (R = 2,4,6-Me₃C₆H₂, 3; R = 2,6-Ph₂C₆H₃, 4), while the reaction with [Rh₂(CO)₄Cl₂] gives trans-[Rh(CO)Cl(PPh₂OR)₂] (R = 2,4,6-Me₃C₆H₂, 5; R = 2,6-Ph₂C₆H₃, 6). The single-crystal X-ray structure analyses of 3 and 5 confirm the trans-coordination of the new ligands in these square-planar complexes.     

Phosphane effects on formation and reactivity of [Ru(L)(PR3)(`N2Me2S2')] complexes with L=N2, N2H4, NH3, and CO

Metal-sulfur complex fragments, to which small molecules like N₂, N₂H₂, N₂H₄, NH₃, or CO can bind, are desirable model compounds concerning enzymatic N₂ fixation.This paper reports on the effects of the phosphane co-ligand on formation and reactivity of [Ru(L)(PR₃)(`N<sub>2</sub>Me<sub>2</sub>S<sub>2</sub>')] [`N₂Me₂S₂'²⁻=1,2-ethanediamine-N,N^′-dimethyl-N,N^′-bis(2-benzenethiolate)(2−)] complexes with nitrogenase relevant ligands, especially N₂, N₂H₄, NH₃, and CO.Treatment of [Ru(NCCH₃)₄Cl₂] with Li₂`N<sub>2</sub>Me<sub>2</sub>S<sub>2</sub>', excessive LiOMe, bulky PPh<sub>3</sub> or PCy<sub>3</sub>, respectively, led to the formation of two series of [Ru(L)(PR<sub>3</sub>)(`N₂Me₂S₂')] complexes [for R=Ph: 1b, 1c (L=NCCH₃), 6b (L=N₂H₄), 7b (L=N₂), 8b_1-3 (L=CO), 9b (L=NH₃); for R=Cy: 1a (L=NCCH₃), 6a (L=N₂H₄), 7a (L=N₂), 8a (L=CO), 9a (L=NH₃)]. While the use of PPh₃ (θ=145°) yielded cis,trans and cis,cis isomers of [Ru(NCCH₃)(PPh₃)(`N<sub>2</sub>Me<sub>2</sub>S<sub>2</sub>')] (1b, 1c), no isomer formation was observed with the bulkier phosphane PCy<sub>3</sub> (θ=170°). Sterically less demanding phosphanes (θ=118-132°) afforded bisphosphane complexes [Ru(PR<sub>3</sub>)<sub>2</sub>(`N₂Me₂S₂')] [2d (R=Me), 2e (R=Et), 2f (R=nPr), and 2g (R=nBu)], which were practically inert and could only be converted in two cases and under drastic reaction conditions into the CO complexes [Ru(CO)(PR₃)(`N<sub>2</sub>Me<sub>2</sub>S<sub>2</sub>')] [4e (R=Et), 4f (R=nPr)]. The chelating bidentate phosphane dppe (bisdiphenylphosphanoethane) yielded exclusively the mononuclear complex [Ru(dppe)(`N₂Me₂S₂')] (3).     

Novel long bipyridine-type linking ligands containing an intervening naphthalene fragment: [Zn(L)(NO3)2], [Zn(L)(NO3)2], and [Cd(L)1.5(NO3)2] (L = (4-py)-CHN-C10H6-NCH-(4-py); L = (3-py)-CHN-C10H6-NCH-(3-py))

Novel bipyridine-type linking ligands L¹ ((4-py)-CHN-C₁₀H₆-NCH-(4-py)) and L² ((3-py)-CHN-C₁₀H₆-NCH-(3-py)), a pair of isomers due to possessing different pairs of terminal pyridyl groups, were prepared by the Schiff-base condensation. In ligand L¹, the N?N separation between the terminal pyridyl groups is 16.0 Å, with their nitrogen donor atoms at the para positions (4,4′). The corresponding N?N separation in ligand L² is 14.2 Å, with the nitrogen donor atoms at the meta positions (3,3′). 1-D zigzag-chain coordination polymers [Zn(L¹)(NO₃)₂] (1) and [Zn(L²)(NO₃)₂] (2) were prepared by reactions of Zn(NO₃)₂ · 6H₂O with ligands L¹ and L², respectively, by solution diffusion. Polymer 3, [Cd(L¹)_1.5(NO₃)₂], prepared from Cd(NO₃)₂ · 4H₂O and L¹, exhibits a 1-D ladder structure, whose repeating ladder unit consists of four Cd metals and four L¹ ligands to create a large 76-membered ring with dimensions of 20.8 × 20.8 Å. All products were structurally characterized by X-ray diffraction.     

Supramolecular assemblies of new 2-D complexes: Syntheses, crystal structures, spectroscopic and magnetic properties of {[MnAu2(CN)4(NITpPy)2(H2O)2]}n and {[Co(N(CN)2)2(NITpPy)2(H2O)2]}n

Two new complexes, {[MnAu₂(CN)₄(NITpPy)₂(H₂O)₂]}_n (1) and {[Co(N(CN)₂)₂(NITpPy)₂(H₂O)₂]}_n (2), have been synthesized and characterized. The single-crystal X-ray analysis for the complexes 1 and 2 demonstrates that each M(II) (M = Mn or Co) ion assumes a distorted octahedral MN₄O₂ coordination polyhedron. Four nitrogen atoms come from the cyanide groups and the pyridyl rings in a common plane, and two oxygen atoms come from the H₂O molecules in trans-positions. The structures of complexes 1 and 2 illustrate that aurophilicity and/or hydrogen bonding interactions play important roles in increasing dimensionality. Magnetic investigations on complexes 1 and 2 show the presence of weak antiferromagnetic interactions.     

Two new supermolecular structures of organic-inorganic hybrid compounds: [Zn(phen)(SO4)(H2O)2]n and [Cu(phen)(H2O)2] · SO4 (phen = 1,10-phenanthroline)

Two new organic-inorganic hybrid compounds [Zn(phen)(SO₄)(H₂O)₂]_n (1) and [Cu(phen)(H₂O)₂] · SO₄ (2) have been prepared by conventional aqueous solution synthesis and characterized by single-crystal X-ray diffraction, IR spectroscopy, thermal gravimetric analysis (TGA) and fluorescent spectroscopy. In compound 1, the sulfate group adopts bidentate mode to coordinate with two Zn(II) ions to form one-dimensional polymer. The one-dimensional polymers are further linked together via the intermolecular hydrogen-bonding and π-π stacking interactions to form a 3D supramolecular framework. Compound 2 is build up of discrete [Cu(phen)(H₂O]²⁺ cations and SO₄²⁻ anions to form a three-dimensional framework via hydrogen-bonding and π-π stacking interactions. Furthermore, the luminescent properties of both 1 and 2 were studied. The complexes 1 and 2 excited at 280 nm wavelength produced characteristic luminescence features, arising maybe due to the π-π transitions.     

Synthesis and structure of two polymeric barium-oxydiacetates: [Ba(oda) · H2O]n and [Ba(Hoda)2]n (H2oda: oxydiacetic acid)

The reaction of barium carbonate or hydroxide with oxydiacetic acid leads to the self-assembly of two barium oxydiacetate polymers in good yield: [Ba(oda) · H₂O]_n (1) and [Ba(Hoda)₂]_n (2). The products have been characterized by elemental analysis, IR, TGA and single crystal X-ray diffraction studies. The central barium atom in each mononuclear fragment is nine-coordinate in 1 and 10-coordinate in 2. These fragments are bridged by carboxylato groups in anti-anti conformation and through H-bonds bonding interactions forming complex 3D networks.     

Main group derivatives of a cyclometallated iron carbonyl anion. Crystal structures of Fe(CO)2{P(OPh)3}{(PhO)2POC6H4}(SnPh3) and two isomers of Fe(CO)2{P(OPh)3}{(PhO)2POC6H4}(I)

The iron hydrido complex HFe(CO)₂{P(OPh)₃}{(PhO)₂POC₆H₄} (1), was rapidly deprotonated by DBU or [BzMe₃N][OH] in THF to afford the new carbonyl iron anion [Fe(CO)₂{P(OPh)₃}{(PhO)₂POC₆H₄}]⁻ ([2]⁻), containing an ortho-metallated triphenyl phosphite ligand. Complex [2]⁻ reacted with triorganostannyl and plumbyl salts and with halogens to give the octahedral Fe^II compounds Fe(CO)₂{P(OPh)₃}{(PhO)₂POC₆H₄}(X) (X=SnPh₃, 3; SnMe₃, 4; PbPh₃, 5; PbMe₃, 6; Cl, 7; Br, 8; I, 9). The Group 14 complexes 3-6 were obtained in one isomeric form in which the P^III-donor atoms are mutually cis, the carbonyl ligands are cis and the P(OPh)₃ and MR₃ (M=Sn, Pb; R=Ph, Me) groups are trans as determined by solution-state IR, ³¹P and ¹³C NMR spectroscopic data. This geometry was confirmed for 3 by a single crystal X-ray diffraction study. The halide complexes, however, were obtained as a mixture of isomers. The major isomer (7, X=Cl; 8a, X=Br; 9a, X=I) has cis P atoms, trans CO groups and the halide located trans to the phosphorus atom of the ortho-metallated phosphite ligand. The structure of 9a was confirmed by an X-ray diffraction study. Two other isomers, designated 8b (X=Br) and 9b (X=I), with cis P atoms and cis CO groups were isolated from the reactions of [2]⁻ with Br₂ and I₂, respectively. The structure of the latter was established by X-ray crystallography and is related to 9a by exchange of the P(OPh)₃ ligand and a carbonyl group such that the metal-bound C atom of the five-membered metallacycle is trans to CO. The stereo-geometry of 8b could not be unambiguously assigned from the spectroscopic data; however, two of the seven possible geometric isomers were suggested as plausible structures.     

Coordination polymers of Cu(II) and Cd(II) with bifunctional chelates of the type dipicolylamino-alkylcarboxylate, (NC5H4CH2)2N(CH2)nCO2H (n = 1, 2, 3 and 4)

A series of bifunctional chelates of the type dipicolylamino-alkylcarboxylate (NC₅H₄CH₂)₂N(CH₂)_nCO₂H (n = 1-4; HL¹-HL⁴, respectively) has been prepared. Reactions of the ligands in aqueous methanol/N,N-dimethylformamide with the appropriate Cu(II) salts yielded the compounds [CuL¹](NO₃)·H₂O (1·H₂O), [CuL²(H₂O)]BF₄·H₂O (2·H₂O), [Cu(HL³)(SO₄)]₂ (3) and [CuL⁴(NO₃)]·MeOH (4·MeOH). While compounds 1, 2 and 4 are one-dimensional, the detailed connectivities within the chains are quite distinct, depending on factors such as alkyl chain length and ligation of aqua ligands or anionic components. In contrast to 1, 2 and 4, the structure of 3 is molecular, a binuclear assembly of edge-sharing Cu(II) ‘4+2’ distorted octahedra. The Cd(II) species, [{CdL²}₂(SO₄)]·4H₂O (5·4H₂O), prepared from HL² and CdSO₄·nH₂O in aqueous methanol/N,N-dimethylformamide, is two-dimensional, with a network constructed from binuclear units of seven coordinate Cd(II), , linked through bridging SO₄²⁻ groups to produce an assembly of linked hexagonal rings [{CdL²}₂(SO₄)]₆.     

Structural analysis and magnetic properties of the copper(II) dicyanamide complexes [Cu2(dmphen)2(dca)4], [Cu(dmphen)(dca)(NO3)]n and [Cu(4,4-dmbpy)(H2O)(dca)2] (dca=dicyanamide; dmphen=2,9-dimethyl-1,10-phenanthroline; 4,4-dmbpy=4,4-dimethyl-2,2-bipyridine)

The preparation, crystal structures and magnetic properties of three copper(II) compounds of formulae [Cu₂(dmphen)₂(dca)₄] (1), [Cu(dmphen)(dca)(NO₃)]_n (2) and [Cu(4,4^′-dmbpy)(H₂O)(dca)₂] (3) (dmphen=2,9-dimethyl-1,10-phenanthroline, dca=dicyanamide and 4,4^′-dmbpy=4,4^′-dimethyl-2,2^′-bipyridine) are reported. The structure of 1 consists of discrete copper(II) dinuclear units with double end-to-end dca bridges whereas that of 2 is made up of neutral uniform copper(II) chains with a single symmetrical end-to-end dca bridge. Each copper atom in 1 and 2 is in a distorted square pyramidal environment: two (1) or one (2) nitrile-nitrogen atoms from bridging dca groups, one of the nitrogen atoms of the dmphen molecule (1 and 2) and either one nitrile-nitrogen from a terminal dca ligand (1) or a nitrate-oxygen atom (2) build the equatorial plane whereas the second nitrogen atom of the heterocyclic dmphen fills the axial position (1 and 2). The copper-copper separations through double (1) and single (2) end-to-end dca bridges are 7.1337(7) (1) and 7.6617(7) (2). Compound 3 is a mononuclear copper(II) complex whose structure contains two neutral and crystallographically independent [Cu(4,4^′-dmbpy)(H₂O)(dca)₂] molecules which are packed in two different layer arrangements running parallel to the bc-plane and alternating along the a-axis. The copper atoms in both molecules have slightly distorted square pyramidal surroundings with the two nitrogen atoms of the 4,4^′-dmbpy ligand and two dca nitrile-nitrogen atoms in the basal plane and a water oxygen in the apical position. A semi co-ordinated dca nitrile-nitrogen from a neighbour unit [2.952(6) Å for Cu(2)-N] is in trans position to the apical water molecule in one of the two molecules, this feature representing part of the difference in supramolecular connections in the alternating layers referred to above. Magnetic susceptibility measurements for 1-3 in the temperature range 1.9-290 K reveal the occurrence of weak antiferromagnetic interactions through double [J=−3.3 cm⁻¹ (1), ] and single [J=−0.57 cm⁻¹ (2), ] dca bridges and across intermolecular contacts [θ=−0.07 K (3)].     

Syntheses and X-ray structures of a series of V2S4(RCS2)4 (R=alkoxy, dialkylamino) complexes

A simple synthetic procedure leading to the V₂(S₂)₂(RCS₂)₄ species (R=Et₂N (1), cyclo-C₄H₈N (2), n-Bu₂N (3), EtO (4), i-PrO (5)) has been developed. X-ray structures of 3 and 5 have been reported, featuring the centrosymmetric molecules with VV distances 2.850(3) Å for 3 and 2.838(2) Å for 5.The FAB mass spectra were recorded. In all cases molecular peaks are observed. Fragmentation patterns are discussed.     

Synthesis and characterization of isopropylamine complexes of lanthanide(II) diiodides: Molecular structure of TmI2(PrNH2)4 and EuI2(PrNH2)4

It was found that the lanthanide diiodides LnI₂ (1) (Ln = Nd, Sm, Eu, Dy, Tm, Yb) are dissolved in isopropylamine (IPA) without redox transformations. Stability of the formed solutions decreases in a row Eu ≈ Yb > Sm > Tm > Dy > Nd. Removing of a solvent in vacuum leaves complexes LnI₂(IPA)_x (2) (Nd, x = 5; Sm, Eu, Dy, Tm, Yb, x = 4) as crystalline colored solids. Stability of 2-Nd,Dy,Tm is higher than that of known THF or DME coordinated salts. Divalent state of metal in the products is confirmed by data of UV-Vis spectroscopy, magnetic measurements and their chemical behavior. Structure of 2-Eu and 2-Tm was established by X-ray diffraction analysis. Oxidation of 2-Nd,Dy in IPA affords amine-amides (PrⁱNH)Ln(IPA)_y (3) (Nd, y = 4; Dy, x = 3). n-Propylamine also dissolves the iodides 1-Sm,Eu,Dy,Tm,Yb but stability of the solutions is significantly lower. 1-Nd vigorously reacts with PrⁿNH₂ even at −30 °C which hampers the formation of the solution.     

Synthesis and structure of products of interaction of H[AuCl4] with H2DMG and pyridine

Two complexes of gold of the compositions [Au(DMG)ClPy] (1) and [AuCl₂Py₂][AuCl₄] · 2[AuCl₃Py] (2), where H₂DMG was dimethylglyoxime, were synthesized as the products of interaction of H[AuCl₄] · 4H₂O with H₂DMG in the presence of pyridine and characterized by X-ray structural analysis. It was shown that depending on the synthetic conditions, the final product represents a molecular complex 1 or an ionic complex 2, in the latter one the charged and neutral species being combined via Au?Cl or Au?Au interactions.     

Heterobimetallic Fe-Pd and Fe-Pt NCN pincer complexes (NCN = [C6H2(CH2NMe2)2-2,6])

The meta-diaminoaryl ferrocenes Fc-NCN-H (3) and Fc-CC-NCN-H (5) (Fc = (η⁵-C₅H₅)(η⁵-C₅H₄)Fe, NCN-H = C₆H₃(CH₂NMe₂)₂-3,5) can be used as precursors in the preparation of heterobimetallic transition metal complexes of structural type Fc-NCN-MX (NCN = [C₆H₂(CH₂NMe₂)₂-2,6]⁻; MX = PdCl (7), PtCl (8), PtI (9)) and Fc-CC-NCN-MX (MX = PdCl (11), PdI (12), PtCl (13)), respectively. They are accessible by applying different synthesis procedures, including oxidative addition and metallation-transmetallation processes.Cyclovoltammetric studies show that the ferrocene moieties in 3, 5, 7-9 and 11-13 can reversibly be oxidised. The potential of the Fe(II)/Fe(III) redox couple decreases with increasing electron density at the NCN pincer unit. The use of 8 as a possible (electro)chemical sensor in the detection of SO₂ is discussed as well.The solid-state structures of 8 and 13 are reported. The crystals of 8 contain two molecules of 8 in the asymmetric unit. The plane of the C₆H₂ moiety is with 27.2(3)° and 38.2(3)° tilted towards the C₅H₄ entity, while in 13 an angle of 45.9(3)° can be found. The d⁸-electron configured platinum atoms possess a somewhat distorted square-planar surrounding, setup by two Me₂NCH₂ortho-substituents, the NCN C_ipso carbon atom and the chloride ligand.     

Hydrogen-halide versus alkyl-halide oxidative addition in dimethyl platinum(II) complexes: Crystal structure of [PtBr2(bpy)]

Dimethyl platinum(II) complexes [PtMe₂(NN)] {NN = bu₂bpy (4,4′-di-tert-butyl-2,2′-bipyridine) (1a), bpy (2,2′-bipyridine) (1b), phen (1,10-phenanthroline) (1c)} reacted with commercial 3-bromo-1-propanol in the presence of 1,3-propylene oxide to afford cis, trans- [PtBrMe₂{(CH₂)₃OH}(NN)] (NN = bu₂bpy (2a), bpy (2b), phen (2c)). On the other hand, [PtMe₂(NN)] (1a)-(1b) reacted with the trace of HBr in commercial 3-bromo-1-propanol to give [PtBr₂(NN)] (NN = bu₂bpy (3a), bpy (3b)). The reaction pathways were monitored by ¹H NMR at various temperatures. Treatment of 1a-1b with a large excess of 3-bromo-1-propanol at −80 °C gave the corresponding methyl(hydrido)platinum(IV) complexes [PtBr(H)Me₂(NN)] (NN = bu₂bpy (4a), bpy (4b)) via the oxidative addition of dimethyl platinum(II) complexes with HBr. The complexes [PtBr(H)Me₂(NN)] decomposed by reductive elimination of methane above −20 °C for bu₂bpy and from −20 to 0 °C for bpy analogue to give methane and platinum(II) complexes [PtBrMe(NN)] (5a)-(5b) and then decomposed at about 0 °C to yield [PtBr₂(NN)] and methane. When the reactions were performed at a molar ratio of Pt:RX/1:10, the corresponding complexes [PtBrMe(NN)] (5a)-(5b) were also obtained. The crystal structure of the complex 3b shows that platinum adopts square planar geometry with a twofold axis through the platinum atom. The Pt…Pt distance (5.164 Å) is considerably larger than the interplanar spacing (3.400 Å) and there is no platinum-platinum interaction.     

Bis(O2S2 macrocycle) complexes of palladium(II)

Two isomeric dibenzo-O₂S₂ macrocycles L¹ and L² have been synthesised and their coordination chemistry towards palladium(II) has been investigated. Two-step approaches via reactions of 1:1-type complexes, [cis-Cl₂LPd] (1a: L = L¹, 1b: L = L²), with different O₂S₂ macrocycle systems (L¹ and L²) have led to the isolation of the following bis(O₂S₂ macrocycle) palladium(II) complexes in the solid state: [Pd(L¹)₂](ClO₄)₂ (2a) and a mixture of [Pd(L¹)₂](ClO₄)₂ (2a) + [Pd(L²)₂](ClO₄)₂ (2b).