Mono and bimetallic Co Schiff base complexes: Coordination induced ligand imidazolidine ring cleavage and stabilization

2-(2′-Hydroxyphenyl) imidazoline ring grafted dinucleating diimine-diamine-tris-phenol ligand (H₃aeas) has been obtained from a two-step reaction of 2-hydroxy acetophenone, N,N′-bis-(2-aminoethyl)ethylenediamine and 2-hydroxy benzaldehyde. Reaction of the ligand with Co(ClO₄)₂·6H₂O and NEt₃ in MeOH-DCM solvent mixture yielded the monometallic complex [Co(aea)]ClO₄·H₂O (1) of imidazolidine ring hydrolyzed hexadentate proligand H₂aea. Any solvent derived MeO⁻ bridged Co₂ complex could not be obtained due to facile cobalt coordination assisted hydrolytic cleavage of substituted imidazolidine ring. When the reaction is carried out with Co(NO₃)₂·4H₂O and CoCl₂·6H₂O in presence of NH₄NCS and NaN₃ in MeOH-DCM and MeOH under aerobic conditions, preassembly of bimetallic [Co₂(μ-OMe)]⁵⁺ and [Co₂(μ-N₃)]⁵⁺ cores takes place on the solvent derived methoxido and azido clips through non-hydrolytic pathways in [(SCN)₂Co₂(μ-OMe)(μ-aeas)]·DMF (2), and cocrystals of [(N₃)₂Co₂(μ-OMe)(μ-aeas)] (3a) and [(N₃)₂Co₂(μ-N₃)(μ-aeas)] (3b), respectively.     

Synthesis, crystal structure, magnetic property and oxidative DNA cleavage activity of an octanuclear copper(II) complex showing water-perchlorate helical network

A new octanuclear copper(II) complex has been synthesized and structurally characterized by X-ray crystallography: [Cu(8)(HL)(4)(OH)(4)(H(2)O)(2)(ClO(4))(2)].(ClO(4))(2).2H(2)O (1) (H(3)L=2,6-bis(hydroxyethyliminoethyl)-4-methyl phenol). The complex is formed by the linkage of two terminal bimetallic cationic units and a tetranuclear mu(3)-hydroxo bridged dicubane core by a very short intramolecular hydrogen bond (O-H...O, 1.48(3)A and the angle 175 degrees). The coordination sphere of the terminal copper atoms is square pyramidal, the apical positions being occupied by water and a perchlorate ion. Complex 1 self-assembles to form a new type of water-perchlorate helical network [(H(2)O)(2)(ClO(4))](infinity) involving oxygen atoms of coordinated perchlorate ion and the two lattice water molecules through hydrogen-bonding interaction. The variable temperature-dependent susceptibility measurement (2-300K) of 1 reveals a strong antiferromagnetic coupling, J(1)=-220cm(-1) and J(2)=-98cm(-1) (J(1) and J(2) representing the exchange constant within [Cu(2+)](4) and [Cu(2+)](2) units, respectively). The complex binds to double-stranded supercoiled plasmid DNA giving a K(app) value of 1.2x10(7)M(-1) and displays efficient oxidative cleavage of supercoiled DNA in the presence of H(2)O(2) following a hydroxyl radical pathway.     

Synthesis and characterization of cobalt oxide nanoparticles by thermal treatment process

The simple preparation of Co₃O₄ nanoparticles from a solid organometallic molecular precursor N-N′-bis(salicylaldehyde)-1,2-phenylenediimino cobalt(II); Co(salophen) has been achieved via two simple steps: firstly, the Co(salophen) precursor was precipitated from the reaction of cobalt(II) acetate and N-N′-bis(salicylaldehyde)-1,2-phenylenediimino; H₂salophen; in propanol under nitrogen condition; then, cubic phase Co₃O₄ nanoparticles with the size of mostly 30-50 nm could be produced by thermal treatment of the Co(salophen) in air at 773 K for 5 h. The as-synthesized products were characterized by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and scanning electronic microscopy (SEM). These results confirm that the resulting oxide was pure single-crystalline Co₃O₄ nanoparticles. The optical property test indicates that the absorption peak of the nanoparticles shifts towards short wavelength, and the blue shift phenomenon might be ascribed to the quantum effect. The hysteresis loops of the obtained samples reveal the ferromagnetic behaviors the enhanced coercivity (H_c) and decreased saturation magnetization (M_s) in contrast to their respective bulk materials.     

Synthesis and characterisation of ammonium mediated assembly of two neutral nickel(II) Schiff base fragments

The 1:2 condensation of o-phenelenediamine and o-vanilline yields a compartmental N₂O₄ ligand N,N′-(1,2-Phenylene)-bis(3-methoxysalicylideneimine) [H₂L]. When nickel(II) thiocyanate is added to the methanol solution of H₂L, followed by addition of ammonium thiocyanate, an unusual nickel(II) compound, [NH₄(NiL)₂SCN]·H₂O (1), is separated out in which an ammonium ion is sandwiched between two neutral square planner NiL moieties. Hydrogen bonding interactions are observed among the ammonium ion, NiL moieties, the thiocyanate anion and the water of crystallization. The compound is characterized by C, H, N analysis, UV-VIS and IR spectroscopy, room temperature magnetic susceptibility measurement and X-ray crystal diffraction study. The compound crystallizes in monoclinic space group P2_1/n with a = 13.8636(7) Å, b = 14.0267(7) Å, c = 22.2715(10) Å and β = 94.301(3)°.     

Release of carboxylic anions and protons by tomato roots in response to ammonium nitrate ratio and pH in nutrient solution

The exudation of certain organic anions and protons by roots which may affect solubility of metals and P and uptake by plants, is affected by nitrogen form and pH. The objective of this work was to study exudation of carboxylates and H⁺/OH^– by tomato plants in response to NH₄/NO₃ ratio and pH in nutrient solution. Four NH₄/(NH₄+NO₃) ratios (R= 0, 0.33, 0.67 and 1) and constant vs. variable solution pH treatments were investigated. The sum of the exudation rates of all carboxylates tended to decline with increasing R, particularly tri- and dicarboxylates. The molar fraction of the exuded tri- and dicarboxylates, averaged over all treatments and plant ages, increased in the order tartarate 2%), malate (6%), succinate (15%), citrate (26%) and fumarate (46%). At R=1 the solution pH dropped from 5.2 to 3 and at R=0 increased to 8. The R corresponding to the pH stat of tomato plant was 0.3. For the constant solution pH treatment, the effect of solution pH on carboxylate exudation rate was small as compared to the effect of R. The exudation of citrate and H⁺ efflux which were initiated when NO₃ and NH₄ uptake rates per plant exceeded certain threshold values, increased with plant age.     

Unique Characteristics of Pb in Soil Contaminated by Red Lead Anti-Corrosion Paint

Red lead (Pb₃O₄) has been extensively used in the past in anti-corrosion paints for the protection of steel constructions such as electricity pylons or bridges. Until recently, little has been known about the behavior of these Pb compounds in soils. Therefore, three pylon soils and six red lead anti-corrosion paints were characterized in terms of solubility, Pb mineral composition, extractability, sorption and desorption, and the chemical speciation of Pb in soil extracts. The pylon soils were characterized by moderate total Pb concentrations (≈700 mg kg^?1), while NH₄NO₃ extractable Pb was exceptionally high (up to 15% of total Pb). In soil extracts, the free Pb²⁺ fraction ranged from 33 to 81% of total soluble Pb. The equilibrium concentration of Pb derived from Pb₃O₄ in ultra-pure water reached 68.5 mg L^?1. This high solubility explains the observed high extractability in soils and contradicts earlier reports of much lower water solubilities of the compound.     

Synthesis, structures, luminescence/magnetic properties of complexes of the M/1-hydroxybenzotriazole, M = cobalt, nickel, silver, zinc and copper

Five novel complexes, Co(OBt)₂ · 7H₂O (1) (OBt = 1-hydroxybenzotriazole ion), Ni₃(OBt)₆ · 6H₂O (2), [Ag(OBt)(HOBt)]_n (3), [Zn(OBt)₂]_n (4) and [Cu₂(OBt)₄ · 3H₂O]_n (5) were synthesized by hydrothermal method and characterized by elemental analysis, IR spectroscopy, TGA, XRPD, and single-crystal X-ray diffraction. The results from single-crystal X-ray diffraction indicate that 1-5 are zero-dimensional (0D), zero-dimensional, one-dimensional (1D), and three-dimensional (3D) frameworks, respectively. In particular, 3 is twin crystal; 4 possesses of double-stranded chains; 5 crystallizes in orthorhombic space group P2₁2₁2₁ with a helical chain in its structure. The luminescence properties and the magnetic properties of the five complexes were investigated.     

Tailoring size and structural distortion of Fe3O4 nanoparticles for the purification of contaminated water

Fe₃O₄ magnetic nanoparticles with different particle sizes were synthesized using two methods, i.e., a co-precipitation process and a polyol process, respectively. The atomic pair distribution analyses from the high-energy X-ray scattering data and TEM observations show that the two kinds of nanoparticles have different sizes and structural distortions. An average particle size of 6–8 nm with a narrow size distribution was observed for the nanoparticles prepared with the co-precipitation method. Magnetic measurements show that those particles are in ferromagnetic state with a saturation magnetization of 74.3 emu g⁻¹. For the particles synthesized with the polyol process, a mean diameter of 18–35 nm was observed with a saturation magnetization of 78.2 emu g⁻¹. Although both kinds of nanoparticles are well crystallized, an obviously higher structural distortion is evidenced for the co-precipitation processed nanoparticles. The synthesized Fe₃O₄ particles with different mean particle size were used for treating the wastewater contaminated with the metal ions, such as Ni(II), Cu(II), Cd(II) and Cr(VI). It is found that the adsorption capacity of Fe₃O₄ particles increased with decreasing the particle size or increasing the surface area. While the particle size was decreased to 8 nm, the Fe₃O₄ particles can absorb almost all of the above-mentioned metal ions in the contaminated water with the adsorption capacity of 34.93 mg/g, which is ∼7 times higher than that using the coarse particles. We attribute the extremely high adsorption capacity to the highly-distorted surface.     

Oriented solids as a colloid suspension in nematic liquid crystal – New tool for IR-spectroscopic and structural elucidation of inorganic compounds and glasses

Possibilities of the linear-polarized infrared (IR-LD) spectroscopy of oriented colloid suspensions in nematic liquid crystals, for structural and local structural elucidation for first time are demonstrated of inorganic compounds and glasses. The advantages of the method for tellurite and borate glasses are shown. The IR-band assignment of the typical local structural units in the glasses are proposed by a comparison with the IR-characteristics of appropriate crystalline analogues as α-TeO₂, V₂O₅, MoO₃ · H₂O and its high temperature form. The IR-spectroscopic characteristics of BO₃, BO₄ and boroxol ring are elucidated, using crystalline β-BaB₂O₄, SrB₄O₇, H₃BO₃ and B₂O₃ as model systems, where the structural moieties have been refined by single crystal X-ray diffraction.     

Mono- and dinuclear Fe(III) complexes with the N2O2 donor 5-chlorosalicylideneimine ligands; synthesis, X-ray structural characterization and magnetic properties

Two novel monomeric [C₁₈H₁₇Cl₃N₂O₂Fe] (1) and dimeric [C₃₈H₃₆N₄O₄Cl₆Fe₂] (2) Fe(III) tetradentate Schiff base complexes have been synthesized and their crystal structures have been determined by single crystal X-ray diffraction analysis. In complex (1) the Schiff base ligand coordinates toward one iron atom in a tetradentate mode and each iron atom is five coordinated with the coordination geometry around iron atom which can be described as a distorted square pyramid. The presence of a short (2.89 Å) non-bonding interatomic Fe···O distances between adjacent monomeric Fe(III) complexes results in the formation of a dimer. Structural analysis of compound (2) shows that the structure is a centrosymmetric dimer in which the six coordinated Fe(III) atoms are linked by μ-phenoxo bridges from one of the phenolic oxygen atoms of each Schiff base ligand to the opposite metal center. The variable-temperature (2-300 K) magnetic susceptibility (χ) data of these two compounds have been investigated. The results show that for both complexes Fe(III) centers are in the high spin configuration (S = 5/2) and indicate antiferromagnetic spin-exchange interaction between Fe(III) ions. The obtained results are briefly discussed using magnetostructural correlations developed for other class of iron(III) complexes.     

Improving of Catalase Stability Properties by Encapsulation in Alginate/Fe3O4 Magnetic Composite Beads for Enzymatic Removal of H2O2

The aim of this study was enhancing of stability properties of catalase enzyme by encapsulation in alginate/nanomagnetic beads. Amounts of carrier (10–100 mg) and enzyme concentrations (0.25–1.5 mg/mL) were analyzed to optimize immobilization conditions. Also, the optimum temperature (25–50°C), optimum pH (3.0–8.0), kinetic parameters, thermal stability (20–70°C), pH stability (4.0–9.0) operational stability (0–390 min), and reusability were investigated for characterization of the immobilized catalase system. The optimum pH levels of both free and immobilized catalase were 7.0. At the thermal stability studies, the magnetic catalase beads protected 90% activity, while free catalase maintained only 10% activity at 70°C. The thermal profile of magnetic catalase beads was spread over a large area. Similarly, this system indicated the improving of the pH stability. The reusability, which is especially important for industrial applications, was also determined. Thus, the activity analysis was done 50 times in succession. Catalase encapsulated magnetic alginate beads protected 83% activity after 50 cycles.     

Direct electron transfer between hemoglobin and pyrolytic graphite electrodes enhanced by Fe(3)O(4) nanoparticles in their layer-by-layer self-assembly films

Alternate adsorption of negatively charged Fe(3)O(4) nanoparticles from their pH 8.0 aqueous dispersions and positively charged hemoglobin (Hb) from its pH 5.5 buffers on solid substrates resulted in the assembly of {Fe(3)O(4)/Hb}(n) layer-by-layer films. Quartz crystal microbalance (QCM), UV-vis spectroscopy, and cyclic voltammetry (CV) were used to monitor and confirm the film growth. A pair of well-defined, nearly reversible CV peaks for HbFe(III)/Fe(II) redox couples was observed for {Fe(3)O(4)/Hb}(n) films on pyrolytic graphite (PG) electrodes. Although the multilayered films grew linearly with the number of Fe(3)O(4)/Hb bilayers (n) and the amount of Hb adsorbed in each bilayer was generally the same, the electroactive Hb could only extend to 6 bilayers. This indicates that only those Hb molecules in the first few bilayers closest to the electrode surface are electroactive. The electrochemical parameters such as the apparent heterogeneous electron transfer rate constant (k(s)) were estimated by square wave voltammetry (SWV) and nonlinear regression. The Soret absorption band position of Hb in {Fe(3)O(4)/Hb}(6) films showed that Hb in the films retained its near native structure in the medium pH range. The {Fe(3)O(4)/Hb}(6) film electrodes also showed good biocatalytic activity toward reduction of oxygen, hydrogen peroxide, trichloroacetic acid, and nitrite. The electrochemical reduction overpotentials of these substrates were lowered significantly by {Fe(3)O(4)/Hb}(n) films.     

Mononuclear iron(III) complexes supported by tripodal N3O ligands: Synthesis, structure and reactivity towards DNA cleavage

A new synthetic route to the known tripodal tetradentate N₃O ligand L¹ (HL¹ = [N-(3,5-di-tert-butyl-2-hydroxybenzyl)-N,N-di-(2-pyridylmethyl)]amine) is reported. The related compounds HLⁿ (n = 2, 3) were prepared by a similar procedure. Treatment of HLⁿ (n = 1-3) with FeCl₃·6H₂O in hot methanol led to the mononuclear iron(III) complexes [Fe(Lⁿ)Cl₂] (1: n = 1, 2: n = 2, 3: n = 3). The solid-state structures of complexes 1 and 2 were determined by X-ray crystallography. [Fe(L¹)Cl₂] (1) showed effective nuclease activity in the presence of hydrogen peroxide, converting supercoiled plasmid DNA to its linear form.     

A simple and rapid harvesting method for microalgae by in situ magnetic separation

A simple and rapid harvesting method by in situ magnetic separation with naked Fe₃O₄ nanoparticles has been developed for the microalgal recovery of Botryococcus braunii and Chlorella ellipsoidea. After adding the magnetic particles to the microalgal culture broth, the microalgal cells were adsorbed and then separated by an external magnetic field. The maximal recovery efficiency reached more than 98% for both microalgae at a stirring speed of 120 r/min within 1 min, and the maximal adsorption capacity of these Fe₃O₄ nanoparticles reached 55.9 mg-dry biomass/mg-particles for B. braunii and 5.83 mg-dry biomass/mg-particles for C. ellipsoidea. Appropriate pH value and high nanoparticle dose were favorable to the microalgae recovery, and the adsorption mechanism between the naked Fe₃O₄ nanoparticles and the microalgal cells was mainly due to the electrostatic attraction. The developed in situ magnetic separation technology provides a great potential for saving time and energy associated with improving microalgal harvesting.     

Sources of N uptake by wheat (Triticum aestivum L.) and N transformations in soil treated with a nitrification inhibitor (nitrapyrin)

Rates of N uptake by spring wheat as ammonium and as nitrate, and rates of nitrification, gross N immobilization and gross N mineralization were measured in a pot experiment during 84 days of growth in a clay soil. Soil treatments included an unfertilized control and addition of ¹⁵NH₄NO₃ or NH₄ ¹⁵NO₃ in the absence and presence of N-serve 24E. Incorporation of ammonium into the soil organic N pool was considerably higher in the presence compared to the absence of nitrapyrin, but the processes contributing to this effect could not be positively identified. Both dry matter and grain yield as well as N uptake by wheat were enhanced in the presence of the inhibitor in N fertilized soil, despite the increased immobilization of N. On the other hand, inhibitor application had a detrimental effect on yield and N uptake by wheat in unfertilized soil. Both ammonium and nitrate forms of inorganic N were absorbed by wheat, but nitrate uptake was dominant in the absence of the inhibitor. The uptake of N as ammonium was higher and the uptake of N as nitrate was less, both in absolute and proportional terms, in the presence compared to the absence of inhibitor. In addition, the proportion of N taken up as ammonium was higher than the proportion of N as ammonium in the available N pool up to day 56 in the inhibitor treatment, which indicated a preference for ammonium uptake by wheat. Evidence was obtained which suggested that several factors may have contributed to the positive response of wheat to inhibitor application in N fertilized soil, including reduced N losses, higher gross N mineralization and a physiological response due to the proportional increase in uptake of inorganic N as ammonium.     

Synthesis, structure and DFT calculation of a hexanuclear mixed-valence copper cluster supported by 2,3-disulfidobenzoate and 3-carboxybenzene-1,2-bis(thiolate)

A homoleptic hexanuclear Cu cluster, [(Cu(DSB)(CBT))₂(Cu₂Br)₂][PPh₄]₂ (1-PPh₄) [DSB = 2,3-disulfidobenzoate; CBT = 3-carboxybenzene-1,2-bis(thiolate)] was synthesized as dark green crystals by the reaction of CuCl₂ with 2,3-dimercaptobenzoic acid in acetate buffer solution. The X-ray crystal study of 1-PPh₄ revealed its unique structural features: (1) one of two types of crystallographically distinct Cu centers adopted a square planer geometry and the other center had a tetrahedral geometry, and (2) intermolecular H-bonding interactions connected between carboxylic acid group of CBT and the carboxylate group of DSB led to the construction of an unprecedented topologic architecture of a zigzag patterned infinite sheet. In addition, taking into account the total charge of the molecule, which contained 2,3-disulfidobenzoate and 3-carboxybenzene-1,2-bis(thiolate), and the diamagnetic nature of 1-PPh₄, 1-PPh₄ led to it is assignment as a mixed-valence Cu(I)/Cu(III) cluster. Such mixed valence states of Cu atoms were also examined by density functional theory calculation.     

Amount of nitrogen fixed by forage,pasture and grain legumes in Cyprus,estimated by the A-value and a modified difference method

The increasing need for protein at low cost has created a need to evaluate the biological nitrogen fixing potential of legumes in Cyprus. In field studies which were conducted over the growing years of 1982–3 and 1983–4, legumes which are traditionally grown in the country were evaluated for dry matter and nitrogen yield and biological nitrogen fixation (BNF). The legumes studied were medic (Medicago truncatula Gearth), ochrus vetch (Lathyrus ochrus L.), bitter vetch (Vicia ervilia L.) and faba bean (Vicia faba L. var major) in the first year and in addition chickpea (Cicer arietinum L.), woollypod vetch (Vicia dasycarpa Ten.) and tickbean (Vicia faba L. var minor) in the second year. Using the A-value method with barley and oats as reference crops, nitrogen (N) fixed by the various legumes in the first year was 30–50% and from 55–67% of total N yield for the two reference crops, respectively. In the second year the estimates of N fixed ranged from 70 to 80% with similar results obtained for the two reference crops barley and ryegrass. However, in the second year chickpea, which had limited nodulation, fixed only 40% of its N yield. Estimates of nitrogen from the atmosphere (Ndfa) obtained by the difference method (DM) were 10 to 14% lower than those from the A-value method. These results were obtained after correcting for the amount of N derived from the applied fertilizer. The two methods were highly correlated (r=0.98) for estimates of amount of BNF. The rates of N₂ fixation of uninoculated legumes which are nodulated by the indigenous populations of Rhizobium in Cyprus are comparable to those of legumes inoculated with selected strains of Rhizobium in other countries. An exception was the amount of N fixed by chickpea. The appearance of the first nodules at late stages of growth may be the reason for the low BNF of this crop.     

Insights into metal ion binding in phospholipases A2: ultra high-resolution crystal structures of an acidic phospholipase A2 in the Ca2+ free and bound states

The electrophile Ca(2+) is an essential multifunctional co-factor in the phospholipase A(2) mediated hydrolysis of phospholipids. Crystal structures of an acidic phospholipase A(2) from the venom of Bothrops jararacussu have been determined both in the Ca(2+) free and bound states at 0.97 and 1.60 A resolutions, respectively. In the Ca(2+) bound state, the Ca(2+) ion is penta-coordinated by a distorted pyramidal cage of oxygen and nitrogen atoms that is significantly different to that observed in structures of other Group I/II phospholipases A(2). In the absence of Ca(2+), a water molecule occupies the position of the Ca(2+) ion and the side chain of Asp49 and the calcium-binding loop adopts a different conformation.     

Preparation and characterization of a bovine serum albumin-catalase conjugate

A bovine serum albumin-catalase conjugate was prepared using a heterobifunctional reagent, N-succinimidyl 3-(2-pyridyldithio)propionate. The purified conjugate had an M _r of 380 kDa. The half-life time of the conjugate was 6, 69 and 65 min after heat treatment, urea treatment and trypsin hydrolysis, respectively, whereas that of native catalase was 3, 22, 28 min, respectively.