Spectroscopic investigation of alloyed quantum dot‐based FRET to cresyl violet dye

Quantum dots (QDs), bright luminescent semiconductor nanoparticles, have found numerous applications ranging from optoelectronics to bioimaging. Here, we present a systematic investigation of fluorescence resonance energy transfer (FRET) from hydrophilic ternary alloyed quantum dots (CdSeS/ZnS) to cresyl violet dye with a view to explore the effect of composition of QD donors on FRET efficiency. Fluorescence emission of QD is controlled by varying the composition of QD without altering the particle size. The results show that quantum yield of the QDs increases with increase in the emission wavelength. The FRET parameters such as spectral overlap J(λ), Förster distance R₀, intermolecular distance (r) , rate of energy transfer k_T (r), and transfer efficiency (E) are determined by employing both steady‐state and time‐resolved fluorescence spectroscopy. Additionally, dynamic quenching is noticed to occur in the present FRET system. Stern–Volmer (K_D) and bimolecular quenching constants (k_q) are determined from the Stern–Volmer plot. It is observed that the transfer efficiency follows a linear dependence on the spectral overlap and the quantum yield of the donor as predicted by the Förster theory upon changing the composition of the QD. Copyright © 2015 John Wiley & Sons, Ltd.     

Study on the fluorescence resonance energy transfer between CdS quantum dots and Eosin Y

Water‐soluble CdS quantum dots (QDs) were prepared using mercaptoacetic acid (TGA) as the stabilizer in an aqueous system. A fluorescence resonance energy transfer (FRET) system was constructed between water‐soluble CdS QDs (donor) and Eosin Y (acceptor). Several factors that impacted the fluorescence spectra of the FRET system, such as pH (3.05–10.10), concentration of Eosin Y (2–80 mg/L) and concentration of CdS QDs (2–80 mg/L), were investigated and refined. Donor‐to‐acceptor ratios, the energy transfer efficiency (E) and the distance (r) between CdS QDs and Eosin Y were obtained. The results showed that a FRET system could be established between water‐soluble CdS QDs and Eosin Y at pH 5.0; donor‐to‐acceptor ratios demonstrated a 1: 8 proportion of complexes; the energy transfer efficiency (E) and the distance (r) between the QDs and Eosin Y were 20.07% and 4.36 nm,respectively. Copyright © 2014 John Wiley & Sons, Ltd.     

Comparison of quantum dot-binding protein tags: Affinity determination by ultracentrifugation and FRET

Background

Hybrid complexes of proteins and colloidal semiconductor nanocrystals (quantum dots, QDs) are of increasing interest in various fields of biochemistry and biomedicine, for instance for biolabeling or drug transport. The usefulness of protein–QD complexes for such applications is dependent on the binding specificity and strength of the components. Often the binding properties of these components are difficult and time consuming to assess.

Methods

In this work we characterized the interaction between recombinant light harvesting chlorophyll a/b complex (LHCII) and CdTe/CdSe/ZnS QDs by using ultracentrifugation and fluorescence resonance energy transfer (FRET) assay experiments. Ultracentrifugation was employed as a fast method to compare the binding strength between different protein tags and the QDs. Furthermore the LHCII:QD stoichiometry was determined by separating the protein–QD hybrid complexes from unbound LHCII via ultracentrifugation through a sucrose cushion.

Results

One trimeric LHCII was found to be bound per QD. Binding constants were evaluated by FRET assays of protein derivatives carrying different affinity tags. A new tetra-cysteine motif interacted more strongly (K_a = 4.9 ± 1.9 nM^− 1) with the nanoparticles as compared to a hexahistidine tag (His₆ tag) (K_a ~ 1 nM^− 1).

Conclusion

Relative binding affinities and binding stoichiometries of hybrid complexes from LHCII and quantum dots were identified via fast ultracentrifugation, and binding constants were determined via FRET assays.

General significance

The combination of rapid centrifugation and fluorescence-based titration will be useful to assess the binding strength between different types of nanoparticles and a broad range of proteins.     

Fluorescent nanoprobes based on quantum dots conjugated to Cramoll to assess surface carbohydrates of Aeromonas spp.

The association of quantum dots (QDs) to carbohydrate-binding proteins – lectins – has revealed novel biotechnological strategies for glycobiology studies. Herein, carboxyl-coated QDs were conjugated by adsorption to Cramoll, a glucose/mannose lectin obtained from Cratylia mollis seeds. Then, the conjugates were optically characterized and used to evaluate the surface carbohydrate profiles of four Aeromonas species isolated from the tambaqui fish (Colossoma macropomum). All the Aeromonas cells were labeled by the conjugate. Inhibition assays with methyl-α-D-mannopyranoside and mannan were performed to confirm the labeling specificity. Cramoll-QDs conjugates presented high brightness and showed similar absorption and emission profiles compared to bare QDs. According to the labeling pattern of Aeromonas spp. by the conjugate, results suggested that A. jandaei and A. dhakensis strains may harbor a higher content of more complex glucose/mannose surface glycans, with more available sites for Cramoll-QDs interaction, than A. hydrophila and A. caviae. Noteworthy, the Cramoll-QDs conjugates demonstrated to be potential tools for bacterial characterization based on superficial carbohydrate detection.     

Simple and sensitive progesterone detection in human serum using a CdSe/ZnS quantum dot-based direct binding assay

In this study, we developed a CdSe/ZnS quantum dot (QD)-based immunoassay for use in determining the presence of progesterone (P₄) in human serum. Hydrophilic QDs were conjugated to anti-progesterone antibody (P₄Ab) via ethyl-3-(dimethylaminopropyl)carbodiimide (EDC) and N-hydroxysuccinimide (NHS) as coupling reagents. After purification, the P₄Ab–QD conjugates were immobilized onto the wells of a 96-well microtiter plate, and a direct-binding immunoassay based on the binding of P₄ to immobilized P₄Ab–QD conjugates had a detection limit of 0.21 ng/ml and a sensitivity of 1.37 ng/ml, with a linear range of 0.385 to 4.55 ng/ml. The proposed immunoassay was successfully used to determine the P₄ concentration in real human serum, and the results showed a good correlation with the accredited radioimmunoassay (RIA).     

Bioconjugated quantum dots for cancer research: Present status,prospects and remaining issues

Semiconductor quantum dots (QDs) are nanoparticles in which charge carriers are three dimensionally confined or quantum confined. The quantum confinement provides size-tunable absorption bands and emission color to QDs. Also, the photoluminescence (PL) of QDs is exceptionally bright and stable, making them potential candidates for biomedical imaging and therapeutic interventions. Although fluorescence imaging and photodynamic therapy (PDT) of cancer have many advantages over imaging using ionizing radiations and chemo and radiation therapies, advancement of PDT is limited due to the poor availability of photostable and NIR fluorophores and photosensitizing (PS) drugs. With the introduction of biocompatible and NIR QDs, fluorescence imaging and PDT of cancer have received new dimensions and drive. In this review, we summarize the prospects of QDs for imaging and PDT of cancer. Specifically, synthesis of visible and NIR QDs, targeting cancer cells with QDs, in vitro and in vivo cancer imaging, multimodality, preparation of QD-PS conjugates and their energy transfer, photosensitized production of reactive oxygen intermediates (ROI), and the prospects and remaining issues in the advancement of QD probes for imaging and PDT of cancer are summarized.     

Protein immobilization on poly-(N-substituted) acrylamides

A series of water-soluble polymers containing side chains derived from N-acryloyl-β-alanine, N-ethylacrylamide and N-[3-(N′,N′,N′-trimethylammonio)propyl] acylamide chloride has been prepared and characterized. A related series of insoluble gels was also prepared. Protein may be attached to these materials by means of amide bond formation between carboxyl groups on the polymers and amino groups of the protein; the preparation and characterization of conjugates formed with α-chymotrypsin are described. Polymers bearing negatively or positively charged side chains are attached to this enzyme at only a single amino acid and the integrity of the active site is largely preserved in these systems. The corresponding gels are not able to bind as much enzyme as are the soluble polymers and bound enzyme is less active in these cases.     

Fluorescence labeling method for estimation of soluble polymers in the living material

The highly fluorescent derivatives of fluorescein, bearing the aliphatic primary amino groups, N-(2-aminoethylcarbonyl)-5(6)-aminofluorescein and 5-[N′-(2-aminoethyl)thioureido]fluorescein, were prepared for labeling of soluble polymers. The absorption and emission properties of these labels and polymers labeled with them were compared with properties of fluorescein and fluorescein isothiocyanate (FITC)-bovine serum albumin conjugate. Effects of the chemical structure of the polymer on the relative fluorescence quantum yield of a covalently attached label were evaluated using ionogenic, olefinic, or phenolic groups in side chains. The fluorescence of labeled polymers was adequate for their tracing in all the cases studied. The most pronounced quenching of fluorescence in the presence of phenolic groups is comparable with the quenching of fluorescence of FITC observed in FITC-protein conjugates. The long-term stability of the polymer-fluorochrome bond was checked in solutions of pH 2.10, 7.46, and 11.84; a higher stability of simple amide over amide plus the thiourea bond was found. The quantitative method of measurement of the concentration of labeled polymers in the biological material in a range of about 10 ng was developed; factors affecting the reproducibility are discussed.     

Bound auxin metabolism in cultured crown-gall tissues of tobacco

Bound auxin metabolism in cultured crown-gall tumor cells and pith callus of tobacco was examined by feeding radiolabeled auxins and auxin conjugates. In all tissues fed [¹⁴C]indoleacetic acid (IAA), at least one-third of the IAA was decarboxylated, and most of the remaining radiolabel occurred in a compound(s) which did not release IAA with alkaline hydrolysis. In cells transformed by the A6 strain of Agrobacterium tumefaciens, the only detectable IAA conjugate was indole-3-acetylaspartic acid (IAAsp), whereas cells transformed by the gene 2 mutant strain A66 produced an unidentified amide conjugate but no IAAsp. By contrast, cells fed [¹⁴C]naphthaleneacetic acid (NAA) accumulated several amide and ester conjugates. The major NAA metabolite in A6-transformed cells was naphthaleneacetylaspartic acid (NAAsp), whereas the major metabolites in A66-transformed cells were NAA esters. In addition, A66-transformed cells produced an amide conjugate of NAA which was not found in A6-transformed cells and which showed chromatographic properties similar to the unknown IAA conjugate. Pith callus fed [¹⁴C] NAA differed from both tumor lines in that it preferentially accumulated amide conjugates other than NAAsp. Differences in the accumulation of IAA and NAA conjugates were attributed in part to the high capacity of tobacco cells to oxidize IAA and in part to the specificity of bound auxin hydrolases. All tissues readily metabolized IAAsp and indole-3-acetyl-myo-inositol, but hydrolyzed NAAsp very slowly. Indirect evidence is provided which suggests that ester conjugates of NAA are poorly hydrolyzed as well. Analysis of tissues fed [¹⁴C]NAA together with high concentrations of unlabeled IAA or NAA indicates that tissue-specific differences in NAA metabolism were not the result of variation in endogenous auxin levels. Our results support the view that bound auxin hydrolysis is highly specific and an important factor controlling bound auxin accumulation.     

Amphiphilic properties of synthetic glycolipids based on amide linkages. I. Electron microscopic studies on aqueous gels

Amphiphiles with one or two amide linkages have been prepared by the reaction (A) of D-gluconic acid lactone with aliphatic amines (C₆-C₁₀) and (C) of N′-gluconoyl-ethylenediamine with alkanoic acids (C₆)-(C₁₀). Gel formation was found to occur on cooling the aqueous solutions at concentrations as low as 1–2%. Electron microscopy revealed that the gels of type A are composed of highly ordered ropes with right-handed twist, especially well developed with N-octylgluconamide. Type c substances with two amide linkages of opposite direction form gels consisting of smooth ribbons devoid of twisting. N-Methylation of the amide bond (type B and D substances) leads to a considerable increase in solubility. Gels are only formed from samples containing decanoic acid. These gels also consist of right-handed fibrillar ropes, only partially ordered with one N-methylated amide linkage (B), regularly aligned side-by-side with one N-methylated and one non-methylated amide bond (D). Gel formation and the typical morphology of the gels are discussed as arising mainly from strong intermolecular hydrogen bonds between amide linkages holding the molecules together and the influence of chiral centers of the carbohydrate chain which might be responsible for helical aggregates to be formed.     

Quantitative characterization of quantum dot‐labeled lambda phage for Escherichia coli detection

We characterize CdSe/ZnS quantum dot (QD) binding to genetically modified bacteriophage as a model for bacterial detection. Interactions among QDs, lambda (λ) phage, and Escherichia coli are examined by several cross‐validated methods. Flow and image‐based cytometry clarify fluorescent labeling of bacteria, with image‐based cytometry additionally reporting the number of decorated phage bound to cells. Transmission electron microscopy, image‐based cytometry, and electrospray differential mobility analysis allow quantization of QDs attached to each phage (4–17 QDs) and show that λ phage used in this study exhibits enhanced QD binding to the capsid by nearly a factor of four compared to bacteriophage T7. Additionally, the characterization methodology presented can be applied to the quantitative characterization of other fluorescent nanocrystal‐biological conjugates. Biotechnol. Bioeng. 2009;104: 1059–1067. Published 2009 Wiley Periodicals, Inc.     

Characterization of multivalent lactose quantum dots and its application in carbohydrate–protein interactions study and cell imaging

We have previously reported a facile and convenient method for the preparation of a new type of lactose-CdSeS/ZnS quantum dots conjugates (Lac-QDs) that exhibit biocompatibility, noncytotoxicity and specificity to leukocytes. In order to further study the carbohydrate–protein interactions, a series of Lac-QDs with different lactose densities and a PEGylated (n = 3) lactose-QDs conjugate (LacPEG-QDs) with more flexible sugar ligands were prepared. The amount of the sugar molecules on QDs can be determined by NMR, which was in agreement with the results from TGA determination. The formula of the conjugates was determined with ICP-OES. The interactions between the conjugated QDs and the PNA protein were measured using SPR, which revealed that higher lactose density favored binding affinity under the same concentration, and Lac-QDs exhibit higher affinity than LacPEG-QDs. We further used a solid phase assay to assess the anti-adhesion activity of Lac-QDs and LacPEG-QDs on the cell level. The results showed that Lac-QDs had stronger activity in preventing THP1 from adhering to HUVEC than LacPEG-QDs, which was consistent with the SPR results. We reasoned that decrease in the conformational entropy induced by appropriate restriction of sugar flexibility could enhance the binding affinity of glyco-QDs, which implies that entropy change may be the main contributor to the interaction between high valent glyco-QDs and protein. The fabrication of lactose on QDs provides a fluorescent multivalent carbohydrate probe that can be used as mimics of glycoprotein for the study of carbohydrate–protein interactions and cell imaging.     

Fluorescence in situ hybridization (FISH) on maize metaphase chromosomes with quantum dot-labeled DNA conjugates

Semiconductor nanocrystals, also called quantum dots (QDs), are novel inorganic fluorophores which are brighter and more photostable than organic fluorophores. In the present study, highly dispersive QD-labeled oligonucleotide (TAG)₈ (QD-deoxyribonucleic acid [DNA]) conjugates were constructed via the metal-thiol bond, which can be used as fluorescence in situ hybridization (FISH) probes. FISH analysis of maize metaphase chromosomes using the QD-DNA probes showed that the probes could penetrate maize chromosomes and nuclei and solely hybridized to complementary target DNAs. Compared with the conventional organic dyes such as Cy3 and fluorescein isothiocyanate, this class of luminescent labels bound with oligonucleotides is brighter and more stable against photobleaching on the chromosomes after FISH. These results suggest that QD fluorophores may be a more stable and useful fluorescent label for FISH applications in plant chromosome mapping considering their size-tunable luminescence spectra. Lu Ma and Sheng-Mei Wu contributed equally to this work.     

Quantum dots‐based fluorescence resonance energy transfer biosensor for monitoring cell apoptosis

The development of advanced methods for accurately monitoring cell apoptosis has extensive significance in the diagnostic and pharmaceutical fields. In this study, we developed a rapid, sensitive and selective approach for the detection of cell apoptosis by combining the site‐specific recognition and cleavage of the DEVD–peptide with quantum dots (QDs)‐based fluorescence resonance energy transfer (FRET). Firstly, biotin‐peptide was conjugated on the surface of AuNPs to form AuNPs‐pep through the formation of an Au‐S bond. Then, AuNPs–pep–QDs nanoprobe was obtained through the connection between AuNPs–pep and QDs. FRET is on and the fluorescence of QDs is quenched at this point. The evidence of UV–vis spectra, transmission electron microscopy (TEM), and Fourier transform infrared (FT‐IR) spectroscopy revealed that the connection was successful. Upon the addition of apoptosis cell lysis solution, peptide was cleaved by caspase‐3, and AuNPs was dissociated from the QDs. At this time, FRET is off, and thus the QDs fluorescence was recovered. The experimental conditions were optimized in terms of ratio of peptide to AuNPs, buffer solution, and the temperature of conjugation and enzyme reaction. The biosensor was successfully applied to distinguishing apoptosis cells and normal cells within 2 h. This study demonstrated that the biosensor could be utilized to evaluate anticancer drugs.     

Comprehensive study of interaction between biocompatible PEG‐InP/ZnS QDs and bovine serum albumin

Polyethylene glycol (PEG) surface modified biocompatible InP/ZnS quantum dots (QDs) act as a potential alternative for conventional carcinogenic cadmium‐based quantum dots for in vivo and in vitro studies. Comprehensively, we studied the interaction between a model protein bovine serum albumin (BSA) and PEGylated toxic free InP/ZnS QDs using various spectroscopic tools such as absorption, fluorescence quenching, time resolved and synchronous fluorescence spectroscopic measurements. These studies principally show that tryptophan (Trp) residues of BSA have preferable binding affinity towards PEG‐InP/ZnS QDs surface and a blue shift in Trp fluorescence emission is a signature of conformational changes in its hydrophobic microenvironment. Photoluminescence (PL) intensity of Trp is quenched by ground state complex formation (static quenching) at room temperature. However, InP/ZnS@BSA conjugates become unstable with increasing temperature and PL intensity of Trp is quenched via dynamic quenching by PEG‐InP/ZnS QDs. Experimentally determined thermodynamic parameters for these conjugates have shown spontaneity, entropy driven and exothermic nature of bio‐conjugation. The calculated binding affinity (n ? 1, Hill coefficient) suggest that the affinity of InP/ZnS QDs for a BSA protein is not dependent on whether or not other BSA proteins are already bound to the QD surface. Energy transfer efficiency (E), Trp residue to InP/ZnS QDs distances and energy transfer rate (k_T) were all obtained from FÖrster resonance energy.     

Capping of CdSe-ZnS quantum dots with DHLA and subsequent conjugation with proteins

We provide a detailed protocol for designing water-soluble CdSe-ZnS quantum dots (QDs) based on cap exchange of the native hydrophobic shell with dihydrolipoic acid (DHLA) ligands, and the preparation of functional QD bioconjugates for use in immunoassays. Our conjugation strategy is based on non-covalent self-assembly between DHLA-capped QDs and protein appended with either an electrostatic attachment domain (namely, the basic leucine zipper) or a polyhistidine tag. These bioconjugates combine the properties of the QD and attached biomolecule to create structures with desirable luminescent and biologically specific properties. This method also allows the preparation of mixed surface conjugates, which results in the conjugates gaining multiple biological activities. Conjugation of DHLA-capped QDs to maltose binding protein (MBP), the immunoglobulin-G-binding beta2 domain of streptococcal protein G (PG) and avidin will be described. MBP and PG were modified by genetic fusion with either a charged leucine zipper or a polyhistidine interaction domain.     

Acid-sensitive polyethylene glycol conjugates of doxorubicin: preparation, in vitro efficacy and intracellular distribution

Coupling anticancer drugs to synthetic polymers is a promising approach of enhancing the antitumor efficacy and reducing the side-effects of these agents. Doxorubicin maleimide derivatives containing an amide or acid-sensitive hydrazone linker were therefore coupled to alpha-methoxy-poly(ethylene glycol)-thiopropionic acid amide (MW 20000 Da), alpha,omega-bis-thiopropionic acid amide poly(ethylene glycol) (MW 20000 Da) or alpha-tert-butoxy-poly(ethylene glycol)-thiopropionic acid amide (MW 70000 Da) and the resulting polyethylene glycol (PEG) conjugates isolated through size-exclusion chromatography. The polymer drug derivatives were designed as to release doxorubicin inside the tumor cell by acid-cleavage of the hydrazone bond after uptake of the conjugate by endocytosis. The acid-sensitive PEG conjugates containing the carboxylic hydrazone bonds exhibited in vitro activity against human BXF T24 bladder carcinoma and LXFL 529L lung cancer cells with IC70 values in the range 0.02-1.5 microm (cell culture assay: propidium iodide fluorescence or colony forming assay). In contrast, PEG doxorubicin conjugates containing an amide bond between the drug and the polymer showed no in vitro activity. Fluorescence microscopy studies in LXFL 529 lung cancer cells revealed that free doxorubicin accumulates in the cell nucleus whereas doxorubicin of the acid-sensitive PEG doxorubicin conjugates is primarily localized in the cytoplasm. Nevertheless, the acid-sensitive PEG doxorubicin conjugates retain their ability to bind to calf thymus DNA as shown by fluorescence and visible spectroscopy studies. Results regarding the effect of an acid-sensitive PEG conjugate of molecular weight 20000 in the chorioallantoic membrane (CAM) assay indicate that this conjugate is significantly less embryotoxic than free doxorubicin although antiangiogenic effects were not observed.     

Photoabsorption and resonance energy transfer phenomenon in CdTe-protein bioconjugates: an insight into QD-biomolecular interactions

Luminescent quantum dots (QDs) possess unique photophysical properties, which are advantageous in the development of new generation robust fluorescent probes based on Forster resonance energy transfer (FRET) phenomena. Bioconjugation of these QDs with biomolecules create hybrid materials having unique photophysical properties along with biological activity. The present study is aimed at characterizing QD bioconjugates in terms of optical behavior. Colloidal CdTe QDs capped with 3-mercaptopropionic acid (MPA) were conjugated to different proteins by the carbodiimide protocol using N-(3-dimethylaminopropyl)-N-ethylcarbodiimide hydrochloride (EDC) and a coupling reagent like N-hydroxysuccinimide (NHS). The photoabsorption of these QD-protein bioconjugates demonstrated an effective coupling of electronic orbitals of constituents. A linear variation in absorbance of bioconjugates at 330 nm proportionate to conjugation suggests a covalent attachment as confirmed by gel electrophoresis. A red shift in the fluorescence of bovine serum albumin (BSA) due to conjugation inferred a decrease in Stokes shift and solvent polarization effects on protein. A proportionate quenching in BSA fluorescence followed by an enhancement of QD fluorescence point toward nonradiative dipolar interactions. Further, reduction in photobleaching of BSA suggests QD-biomolecular interactions. Bioconjugation has significantly influenced the photoabsorption spectrum of QD bioconjugates suggesting the formation of a possible protein shell on the surface of QD. The experimental result suggests that these bioconjugates can be considered nanoparticle (NP) superstructures for the development of a new generation of robust nanoprobes.     

Influence of quantum dots on the aromaticity of thiosalicylic acid

When ligands are coordinated to quantum dots (QDs), the ring current of the ligand strongly influences the applications of the QDs, for example in solar cell technology. The Raman spectrum of the ligand can be used to probe and identify ions or measure ion concentrations. Here, we investigated, using a theoretical method, the aromaticities and Raman spectra of CdTe, CdSe, and CdS QDs coordinated with thiosalicylic acid ligands. We found that the aromaticity of the benzene ring in free thiosalicylic acid increased when it was used as a QD ligand. The ring currents of the benzene rings in the CdTe–ligand, CdSe–ligand, and CdS–ligand systems were stronger than the ring current of the benzene ring in free thiosalicylic acid; in other words, the QDs influence the ring current—they enhance the electron transfer rate of the benzene ring. We also discovered that the CdTe–ligand and CdSe–ligand systems have stronger ring currents than the CdS–ligand system. The high electronegativity and vacant d orbital of the sulfur atom influence the ring current of the ligand in the CdS–ligand system. Further, the Raman spectrum of free thiosalicylic acid was different from the spectra of the ligands in the QD–ligand systems: the Raman spectra of COO^? in each QD–ligand system was enhanced compared with that of the COO^? in free thiosalicylic acid.

Biotin-4-fluorescein based fluorescence quenching assay for determination of biotin binding capacity of streptavidin conjugated quantum dots

The valency of quantum dot nanoparticles conjugated with biomolecules is closely related to their performance in cell tagging, tracking, and imaging experiments. Commercially available streptavidin conjugates (SAv QDs) are the most commonly used tool for preparing QD-biomolecule conjugates. The fluorescence quenching of biotin-4-fluorscein (B4F) provides a straightforward assay to quantify the number of biotin binding sites per SAv QD. The utility of this method was demonstrated by quantitatively characterizing the biotin binding capacity of commercially available amphiphilic poly(acrylic acid) Qdot ITK SAv conjugates and poly(ethylene glycol) modified Qdot PEG SAv conjugates with emission wavelengths of 525, 545, 565, 585, 605, 625, 655, 705, and 800 nm. Results showed that 5- to 30-fold more biotin binding sites are available on ITK SAv QDs compared to PEG SAv QDs of the same color with no systematic variation of biotin binding capacity with size.