Syntheses and structures of bis(2,6-xylyl-nacnac) copper(I) complexes

The copper(I) complexes {(bis-2,6-dimethylphenyl-penta-2,3-diiminato)Cu}₂(μ-toluene), 3 has been prepared and its reactivity against Lewis bases and nitrous oxide investigated. Complex 3 crystallizes as a toluene-bridged dimer and forms mono- and dinuclear benzene adducts in C₆D₆ solution. It does not coordinate excess THF, but reacts quantitatively with 1 equiv. of acetonitrile. Reaction with 2,6-xylyl isonitrile yields (bis-2,6-dimethylphenyl-penta-2,3-diiminato)Cu(2,6-xylyl isonitrile), 5, (ν_CN = 2123 cm⁻¹), which was characterized by an X-ray diffraction study. Complex 3 does not react with nitrous oxide in either C₆D₆ solution (5 days 50 °C) or in diethyl ether (13 days at ambient temperature).     

Synthesis and characterization of the 1:1 adducts of copper(I) halides with bidentate N,N′-bis(benzophenone)-1,2-diiminoethane Schiff base: Crystal structures of [Cu(bz2en)2][CuX2] (X = Br, I) complexes

1:1 adducts of N,N′-bis(benzophenone)-1,2-diiminoethane (bz₂en) with copper(I) chloride, bromide and iodide, [Cu(bz₂en)₂][CuX₂] (X = Cl, Br, and I), have been synthesized and the structures of the solid bromide and iodide adducts were determined by X-ray crystallography from single-crystal data. The solid-state structure reveals ionic complexes containing a cation of copper(I) ion coordinated to four nitrogen atoms of two bz₂en molecules (distorted tetrahedron) and a linear dibromocuprate(I) and a di-μ-iodo-diiododicuprate(I) anion for the bromo and iodo adducts, respectively. The bromo adduct structure contains CH?Br intermolecular hydrogen bonds. The complexes are very stable towards atmospheric oxygen in the solid state. The spectral properties of the above complexes are also discussed.     

Monomeric, oligomeric, and polymeric copper(II) complexes of calix[4]arene-derived ligands

Deprotonation of the p-tert-butylcalix[4]arene disubstituted at alternate phenolic positions with picolyl groups 2 was achieved with alkali metal hydrides LiH, NaH, and KH. The dianionic calixarene derivatives were subjected to complete substitution at the phenolic rim with allyl bromide, providing the tetraalkylated derivatives in cone 3a and partial-cone conformations 3b; both compounds were crystallographically characterized. Compound 2, as well as 3a and 3b were tested as ligands towards CuCl₂, affording Cu²⁺ complexes in the first two cases. Polymeric [2·CuCl₂] was obtained from 2 and CuCl₂ in MeOH/CH₂Cl₂ solutions, and consists of chains of the ditopic calixarene acting as an N-donor towards Cu²⁺ ions outside the macrocyclic cavity. Employment of EtOH/CH₂Cl₂ mixtures results in the tricopper complex [(2)₂Cu₃Cl₆(EtOH)₂]. In contrast, reactions of ligand 3a with CuCl₂ afforded monomeric [3a·CuCl₂], while no Cu²⁺ complexes could be obtained when 3b was employed. The presence of intramolecular hydrogen bonds in 2 appears to control the formation of oligomeric or polymeric copper complexes, while the lack of such hydrogen bonds allows the proper alignment of N-donors to coordinate Cu²⁺ directly above the macrocyclic cavity.     

Structure-dependent spectroscopic and redox properties of copper(I) complexes with bidentate iminopyridine ligands

A series of iminopyridine ligands; cyclopropylpyridin-2-ylmethyleneamine (A), cyclopentylpyridin-2-ylmethyleneamine (B), cyclohexylpyridin-2-ylmethyleneamine (C), and cycloheptylpyridin-2-ylmethyleneamine, (D) and their copper(I) complexes, [Cu(L)₂]⁺ (1a-1d) and [Cu(L)(PPh₃)₂]⁺ (2a-2d) have been synthesized and characterized by CHN analyses, ¹H NMR and IR and UV-Vis spectroscopy. Structures of 1a, 1b, 1c and 2a were determined by X-ray crystallography. The coordination polyhedron about the Cu^I center in the complexes is best described as a distorted tetrahedron. The dihedral angles between the least-squares planes of the chelate ligands show considerable variation from 86.1° in 1a to 68.3° in 1b, indicating the importance of packing forces in the crystalline environment. The UV-Vis spectra of the complexes are characterized by first metal to ligand charge transfer bands increasing in wavelength with increasing size of the ring substituents in the ligands, except for the cyclopropyl compounds (1a and 2a), in good agreement with the variation of the dihedral angles between the ligand planes. Cyclic voltammetry of the complexes indicates a quasireversible redox behavior for the complexes. The bulkier ligands (PPh₃) inhibit the geometric distortion within the oxidized form and the redox potentials of complexes 2a-2d are shifted to more positive values, therefore.     

Spectroscopic and electrochemical properties of heteroleptic cationic copper complexes bis-(diphenylphosphino)alkane-(2,2′-biquinoline)copper(I). Crystal structure of bis(diphenylphosphino)ethane-(2,2′-biquinoline)copper(I) perchlorate

A series of [Cu^(I)(2,2′-biquinoline)(L)](ClO₄) complexes (L = bis(diphenylphosphino)methane (bppm), 1,2-bis(diphenylphosphino)ethane (bppe), 1,4-bis(diphenylphosphino)butane (bppb)) have been synthesized and characterized by elemental analysis, conductivity, ESI-mass, NMR and UV-Vis spectroscopies, cyclic voltammetry, X-ray diffraction ([Cu^(I)(2,2′-biquinoline)(bppe)](ClO₄)) and DFT calculations. These compounds are monometallic species in a distorted tetrahedral arrangement, in contrast with related compounds found as dinuclear according to diffraction studies. The spectroscopic properties are not directly correlated with the length of alkyl chain bridge between the bis-diphenylphosphine groups. In this way, the chemical shift of some 2,2′-biquinoline protons and the metal to ligand charge transfer (Cu to 2,2′-biquinoline) follows the order [Cu(2,2′-biquinoline)(bppm)](ClO₄), [Cu(2,2′-biquinoline)(bppb)](ClO₄), [Cu(2,2′-biquinoline)(bppe)](ClO₄). The same dependence is followed by the potentials to Cu(II)/Cu(I) couple. These results are discussed in terms of inter-phosphorus alkane chain length and tetrahedral distortions on copper.     

Structural forms in complexes of 2,9-dimethyl-1,10-phenanthroline with simple salts of copper(I) and other univalent ‘closed shell’ species

Syntheses, spectroscopic and structural characterizations of a series of Cu(I)-phenanthroline complexes are reported. A single crystal X-ray structure determination is recorded for CuNO₃:dmp:MeCN (1:1:1), ‘dmp’ = 2,9-dimethyl-1,10-phenanthroline, showing it to be isomorphous with its previously studied tetrafluoroborate, perchlorate and hexafluorophosphate, and silver(I) perchlorate counterparts, the metal atom lying in a trigonal planar [(N^∧N)Cu(NCMe)] coordination environment, the anion not being coordinated. Structure (re-) determinations are also reported for a number of salts of the [Cu(dmp)₂]⁺ cation: the perchlorate, isomorphous with numerous other salts, not only of copper(I), but also lithium(I)), also the unsolvated nitrate, and a solvated form of the chloride.     

Coordination chemistry of acrylamide 3: Synthesis, crystal structure and IR spectroscopic properties of dichloro-tetrakis(O-acrylamide)copper(II), [Cu(O-OC(NH2)CHCH2)4Cl2]

The molecular structure of copper(II) chloride complex with acrylamide (AAmCH₂CHCONH₂), [Cu(AAm)₄Cl₂], was determined using X-ray diffraction analysis. The complex crystallizes in the cubic space group I-43d with a = 17. 8310(2) Å, β = 90°, and V = 5669.27(11) ų for Z = 12. The acrylamide molecules bind to the metal center via the carbonyl oxygen atom (Cu-O 1.996 Å). The coordination geometry of the metal center in the complex involves a tetragonally distorted octahedral structure with four O-donor atoms of acrylamide bonded in the equatorial positions and two chlorides in the apical positions. Comparison of crystal structure data of acrylamide and metal acrylamide complexes of those formed with divalent transition metal chlorides has been summarized.     

Synthesis, characterization, crystal structures and photophysical properties of copper(I) complexes containing 1,1′-bis(diphenylphosphino)ferrocene (B-dppf) in doubly-bridged mode

Five copper(I) complexes having general formula [Cu₂(μ-X)₂(κ²-P,P-B-dppf)₂] (X = Cl(1), Br(2), I(3), CN(4), and SCN(5)) were prepared starting with CuX and B-dppf in 1:1 molar ratio in DCM-MeOH (50:50 V/V) at room temperature. The complexes have been characterized by elemental analyses, IR, ¹H NMR, ³¹P NMR and electronic spectral studies. Molecular structures for 1, 2 and 4 were determined crystallographically. Complexes 1, 2 and 4 exist as centrosymmetric dimers in which the two copper atoms are bonded to two bridging B-dppf ligands and two bridging (pseudo-)halide groups in a μ-η¹ bonding mode to generate nearly planar Cu₂(μ-η¹-X)₂ framework. Both bridging B-dppf ligands are arranged in antiperiplanar staggered conformation in 1 and 2 (mean value 56.40-56.76°), and twisted from the eclipsed conformation (mean value 78.19°) in 4. The Φ angle value in 4 is relatively larger as compared to 1 and 2. This seems to indicate that the molecular core [Cu₂(μ-η¹-X)₂] in 4 is a sterically demanding system that forces the B-dppf ligand to adopt a relatively strained conformation in comparison to less strained system in 1 and 2. All the complexes exhibit moderately strong luminescence properties in the solution state at ambient temperature.     

Synthesis and X-ray crystal structure of a polymeric copper(II) complex containing the novel ligand 4,4-(1,4-phenylene)bis[3-phenyl-5-(2-pyridyl)-4H-1,2,4-triazole]

The synthesis and X-ray crystal structure of the complex {[Cu^II(Ph₂PBPT)(bpy)](ClO₄)₂ · 2DMF}_∞ where Ph₂PBPT=4,4^′-(1,4-phenylene)bis[3-phenyl-5-(2-pyridyl)-4H-1,2,4-triazole], bpy=2,2^′-bipyridine and DMF=N,N-dimethylformamide are reported. In this one-dimensional coordination polymer the Cu²⁺ ions are in a distorted octahedral N₆ coordination environment made up of two Ph₂PBPT molecules, each chelating via one pyridine and one triazole nitrogen, and one bpy co-ligand. Within the zig-zag chain thus formed the shortest distance between two metal centres across the Ph₂PBPT ligand is 13.305(3) Å while it is 10.009(3) Å between two chains. This complex represents the first structurally characterised example of a coordination compound incorporating a chelating 4,4^′-bis(4H-1,2,4-triazole) as a ligand.     

Silver (I) poly(1,2,4-triazolyl)borate complexes containing monodentate phosphane ligands

New silver (I) derivatives containing monodentate tertiary phosphanes and anionic poly(triazol-1-yl)borate ligands have been prepared from the reaction of AgNO₃ and PR₃ (R = Ph, Bn, o-tolyl, m-tolyl, p-tolyl) and potassium dihydrobis(1,2,4-triazolyl)borate, K[H₂B(tz)₂], or potassium hydrotris(1,2,4-triazolyl)borate, K[HB(tz)₃]; their solid state and solution properties have been investigated through analytical and spectroscopic measurements (IR, ¹H-, and ³¹P NMR). The ¹H- and ³¹P NMR solution spectra in some cases can be interpreted on the basis of a dissociation of [{H₂B(tz)₂}Ag(PR₃)₂] into [{H₂B(tz)₂}Ag(PR₃)] and PR₃. All the compounds are soluble in chlorinated solvents and are non-electrolytes in CH₂Cl₂ and acetone solutions. [{H₂B(tz)₂}Ag(PPh₃)₂] and [{H₂B(tz)₂}Ag{P(m-tolyl)₃}₂] are simple mononuclear arrays, the silver atoms lying in four-coordinate N₂AgP₂ environments. Owing to the presence of the methyl substituents on the phosphane ligand, the complex [{HB(tz)₃}Ag{P(o-tolyl)₃}], as expected, is mononuclear. In [{H₂B(tz)₂}Ag{P(p-tolyl)₃}], the silver environment is still four-coordinate but PAgN₃, utilizing the coordinating capability of one of the additional (‘exo’-) ring nitrogens not only to complete the four-coordinate array about the silver but, necessarily, to link successive asymmetric units into a single-stranded polymer.     

Synthesis and X-ray crystal structures of dinuclear silver(I) complexes of heteroaryl thioethers

The X-ray crystal structures of four complexes, obtained by reaction of silver nitrate with four different heteroaryl thioethers, are described. In these compounds the ligands act as dinuclear bridges between silver atoms, with coordination exclusively through the nitrogen donor atoms. All ligands form dinuclear complexes, either as discrete species or as higher aggregates involving additional nitrate bridges. π–π Stacking interactions provide extra stabilisation in some of the structures.     

Trinuclear copper(II) complexes of bis(acylhydrazone) ligands. Structural analysis and magnetic properties of a sulfato-bridged hexanuclear dimer

The synthesis and spectroscopic characterization of the new symmetric, ligand bis(salicylaldehyde)methyliminodiacetylhydrazone (H₄MeImds) is reported. The reactions of H₄ MeImds with copper(II) chloride, nitrate and sulfate give trinuclear metal complexes of formula Cu₃(MeImds)Cl₂ · CHCl₃ · H₂O, Cu₃(MeImds)(NO₃)₂ · 2H₂O and Cu₃(MeImds)(SO₄) · 8H₂O; the trinuclear species are obtained in spite of the used metal:ligand molar ratio. The X-ray crystal structure of [Cu₃(MeImds)(SO₄)(H₂O)₃] · 5H₂O is determined; it consists of linear units, with the nonadentate ligand bound to three copper ions. The trimetallic units are bridged via sulfate anions to give hexanuclear dimers with an imposed centre of symmetry. The magnetic properties of [Cu₃(MeImds)(SO₄)(H₂O)₃] · 5H₂O are characterized by a significant antiferromagnetic coupling within the trimetallic units and by a weak antiferromagnetic coupling between them. The analogous trinuclear copper(II) complexes Cu₃(HImds)Cl₂ · H₂O and Cu₃(HImds)(SO₄) · 4H₂O (H₅Imds, bis(salicylaldehyde)iminodiacetylhydrazone) were also prepared and spectroscopically characterized.     

Synthesis, spectroscopic and structural characterization of some novel adducts of copper(II) salts with unidentate nitrogen bases

Syntheses, spectroscopic characterization and single crystal X-ray studies are reported for a number of complexes of copper(II) salts with simple monodentate nitrogen bases. The 1:4 adduct of copper(II) sulfate with 3,5-dimethylpyridine (m₂py) CuSO₄·4m₂py, takes the form [(O₃SO)Cu(m₂py)₄], the Cu-O vector of the square-pyramidal coordination environment being disposed on the 4-axis in tetragonal space group P4/n. The complex CuCO₃·Cu(NCS)₂·4py is a linear polymer, taking the form ?O·Cu(py)₂·O·C{O·Cu(py)₂(NCS)₂}·O·Cu(py)₂? (etc.), all atoms lying in the mirror plane of space group Pnma, excepting the pair of ‘py’ (pyridine) ligands disposed to either side. In Cu(OH)I·3/4I₂·2py·1/2MeCN ≡ [{(py)₂Cu(OH)}₄](I₃)₃I·2MeCN a novel cubanoid tetranuclear cation is found (2-symmetry). The EPR spectra of the above compounds show a trend in the anisotropy of the g-values that correlates well with the crystal structures. Obtained only in small quantities but supported by single crystal X-ray studies are the adduct of Cu(OH)Cl with pyrrolidine (pyrr), Cu(OH)Cl:pyrr (1:3), which takes the centrosymmetric binuclear form [(pyrr)₃Cu(μ-OH)₂Cu(pyrr)₃]Cl₂, the copper atom being disposed in a distorted trigonal bipyramidal array, and the adduct 3CuCl₂·CuO·4quin, [Cu₄Cl₆O(quin)₄]Cl₂, which contains the familiar Cu₄Cl₆O core with monodentate quinuclidine (quin) attached to the copper atoms; this compound crystallizes in the cubic space group .     

Synthesis and structural analysis of copper(II) cysteine complexes

This report describes the synthesis and structural analysis of stable copper(II) cysteine complexes. Pale pink copper(II) cysteine complexes were synthesized in mole ratios of 1:2, 1:4, and 1:6 of copper(II):cysteine in ethanol. Infrared spectroscopy and X-ray absorption spectroscopy confirmed that copper(II) binding occurred via the thiol ligand of cysteine. XANES analysis showed that the oxidation state of copper remained as copper(II) and the local atomic geometry was similar in all of the cysteine complexes. The EXAFS data indicate that the copper(II) cysteine complexes are forming ring type structures with sulfur ligands from the cysteines acting as bridging ligands. X-ray diffraction revealed that the copper(II) cysteine complexes formed monoclinic cells with maximum crystallinity found in the 1:4 copper(II):cysteine complex.     

Oxazolone copper(I) complexes inspired by the methanobactin active site

Two oxazolone-derived potential ligands with enethioether substituents have been synthesized that differ by the terminal thioether moiety (S-Et in L¹, S-C₆H₄(OMe)-2 in L²). Both L¹ and L² behave as bidentate {NS} chelate ligands to form stable complexes with copper(I) triflate that crystallize as dimeric complexes [L₂Cu₂(OTf)₂] (4 and 5) featuring a central {Cu₂S₂} diamond core with distinctly different Cu-S bonds. L¹ as well as 4 and 5 have been characterized by single crystal X-ray diffraction. NMR spectroscopy including ¹H and ¹⁹F DOSY experiments reveals that 4 and 5 dissociate into monomeric species [LCu(OTf)] (4′ and 5′) in CDCl₃ solutions. 4′ and 5′ retain the {NS} binding motif of the oxazolone-derived ligands, but are in slow equilibrium with their {OS} isomers 4″ and 5″ that result from E/Z isomerization of the exocyclic enethioether double bond.     

Synthesis and characterisation of isomeric cycloaurated complexes derived from the iminophosphorane Ph3PNC(O)Ph

Using different organomercury substrates, two isomeric cycloaurated complexes derived from the stabilised iminophosphorane Ph₃PNC(O)Ph were prepared. Reaction of Ph₃PNC(O)Ph with PhCH₂Mn(CO)₅ gave the manganated precursor (CO)₄Mn(2-C₆H₄C(O)NPPh₃), metallated on the C(O)Ph substituent, which yielded the organomercury complex ClHg(2-C₆H₄C(O)NPPh₃) by reaction with HgCl₂ in methanol. Transmetallation of the mercurated derivative with Me₄N[AuCl₄] gave the cycloaurated iminophosphorane AuCl₂(2-C₆H₄C(O)NPPh₃) with an exo PPh₃ substituent. The endo isomer AuCl₂(2-C₆H₄Ph₂PNC(O)Ph) [aurated on a PPh₃ ring] was obtained by an independent reaction sequence, involving reaction of the diarylmercury precursor Hg(2-C₆H₄P(NC(O)Ph)Ph₂)₂ [prepared from the known compound Hg(2-C₆H₄PPh₂)₂ and PhC(O)N₃] with Me₄N[AuCl₄]. Both of the isomeric iminophosphorane derivatives were structurally characterised, together with the precursors (2-HgClC₆H₄)C(O)NPPh₃ and (CO)₄Mn(2-C₆H₄C(O)NPPh₃). The utility of ³¹P NMR spectroscopy in monitoring reaction chemistry in this system is described.     

Two different 1D-chains in the structures of the copper(I) coordination polymers based on bidentate Schiff-base building units and thiocyanate anions as bridging ligands

The reaction of the bidentate Schiff-base ligands (3,4,5-MeO-ba)₂en (L¹) and (4-Me-ba)₂en (L²) with Cu(SCN) in CH₃CN yielded two copper(I) coordination polymers [Cu(L¹)(SCN)]_n (1) and [Cu(L²)(SCN)]_n (2), which have been characterized by elemental analyses, IR- and ¹H NMR-spectroscopy, and X-ray crystallography. The non-centrosymmetric structures of both Cu(I) complexes consist of an one-dimensional polymeric chain in which copper(I) ions are bridged by two thiocyanate groups bonding in an end-to-end fashion. The Cu(I)?Cu(I) separation is 5.604 Å in 1 and 5.706 Å in 2.     

Synthesis and characterization of copper(I) and silver(I) complexes with heterocyclic bidentate ligands (N, X), X = S, Se

The synthesis and structural characterization of series of copper and silver homoleptic complexes [M(R-pyX)], M = Cu, Ag, X = S, Se; R = H, 3-CF₃, 5-CF₃ (not all combinations), is described. The copper compounds, as well as [Ag(pySe)] and [Ag(3-CF₃-pySe)], were synthesised by electrochemical oxidation of anodic metal in a cell containing an acetonitrile solution of the corresponding proligand. The other homoleptic silver complexes were obtained by direct reaction between AgNO₃ and the salt of the corresponding ligand in methanol. In addition, the reaction of the metal thiolate compounds with bis(diphenylphosphino)ethane (dppe) in acetone allowed the synthesis of heteroleptic compounds [M₂(R-pyX)₂(dppe)₃]. The compounds obtained have been characterized by microanalysis, IR spectroscopy and mass spectrometry and, in cases where the complexes were sufficiently soluble, by ¹H NMR spectroscopy. The proligands (3-CF₃pySe)₂ (1), (5-CF₃-pySe)₂ (2) and (5-CF₃-pySe-DMF) (3) and the complexes [Cu(3-CF₃-pyS)] (4), [Ag(3-CF₃-pyS)] (5) and [Cu₂(5-CF₃-pyS)₂(dppe)₃] (6) were obtained as crystalline products and were studied by X-ray diffraction methods.     

Chelating and bridging bis(diphenylphosphino)aniline complexes of copper(I)

The ligand bis(diphenylphosphino)aniline (dppan) has been shown to be a versatile ligand sporting different coordination modes and geometries as dictated by copper(I) and the counter ion. The molecular structures of its Cu(I) complexes were characterized by X-ray crystallography. The ligand was found in a chelating mode and monomeric complexes were formed when the ligand to copper ratio was 2:1 and the anion was non-coordinating. However, with thiocyanate as the counter anion, the ligand was found to adopt two different modes, with one ligand chelating and the other acting as a monodentate ligand. With CuX (X = Cl, Br), dppan formed a tetrameric complex when the ligand and metal were reacted in the ratio of 1:1. But reactions containing ligand and metal in the ratios of 1:2 or 2:1, resulted in the formation of a mixture of species in solution. Crystallization however, led to the isolation of the tetrameric complex. Variable temperature ³¹P{¹H} NMR spectra of the isolated tetramers did not show the presence of chelated structures in solution. Tetra-alkylammonium salts were added to solutions of various complexes of dppan and studied by ³¹P{¹H} NMR to probe the effect of anions on the stability of complexes in solution. The Cu-dppan complexes were robust and did not interconvert with other structures in solution unlike the bis(diphenylphosphino)isopropylamine complexes.     

Synthesis, characterization and magnetic properties of new homotrinuclear copper(II) complexes

Two new mononuclear bis(oxamato) complexes with the formula [nBu₄N]₂[M(nabo)] M = Ni (4), Cu (5), with nabo = 2,3-naphthalene-bis(oxamato) have been synthesized as precursors for trinuclear oxamato-bridged transition metal complexes. Starting from 5 the homo-trinuclear complex [Cu₃(nabo)(pmdta)₂(BF₄)](BF₄) · MeCN · Et₂O (7), with pmdta = N,N,N′,N″,N″-pentamethyldiethylenetriamine, has been prepared. The central N,N′-2,3-naphthalene bridge of 7 is so far the most extended π-conjugated bridge of trinuclear bis(oxamato) type transition metal complexes. The goal of this work was to verify the N,N′-2,3-naphthalene bridge of 7 on its magnetic properties in comparison to the N,N′-o-phenylene bridge of the related homo-trinuclear complex [Cu₃(opba)(pmdta)₂(NO₃)](NO₃) · 2MeCN (6) (opba = o-phenylene-bis(oxamato)). The crystal structures of 4-7 were solved. The magnetic properties of 6 and 7 were studied by susceptibility measurements versus temperature. For the intramolecular J parameter, values of −89 cm⁻¹ (6) and −113 cm⁻¹ (7) were obtained. The different J values are discussed based on the crystal structures of 6 and 7.