Thallium(III) complexes of the metalloligands [Pt2(μ-S)2(PPh3)4] and [Pt2(μ-Se)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the diarylthallium(III) bromides Ar₂TlBr [Ar = Ph and p-ClC₆H₄] in methanol gave good yields of the thallium(III) adducts [Pt₂(μ-S)₂(PPh₃)₄TlAr₂]⁺, isolated as their salts. The corresponding selenide complex [Pt₂(μ-Se)₂(PPh₃)₄TlPh₂]BPh₄ was similarly synthesised from [Pt₂(μ-Se)₂(PPh₃)₄], Ph₂TlBr and NaBPh₄. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with PhTlBr₂ gave [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]⁺, while reaction with TlBr₃ gave the dibromothallium(III) adduct [Pt₂(μ-S)₂(PPh₃)₄TlBr₂]⁺[TlBr₄]⁻. The latter complex is a rare example of a thallium(III) dihalide complex stabilised solely by sulfur donor ligands. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄TlPh₂]BPh₄, [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]BPh₄ and [Pt₂(μ-S)₂(PPh₃)₄TlBr₂][TlBr₄] reveal a greater interaction between the thallium(III) centre and the two sulfide ligands on stepwise replacement of Ph by Br, as indicated by shorter Tl-S and Pt?Tl distances, and an increasing S-Tl-S bond angle. Investigations of the ESI MS fragmentation behaviour of the thallium(III) complexes are reported.     

The arylation of [Pt2(μ-S)2(PPh3)4]

Routes to the synthesis of the mixed sulfide-phenylthiolate complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ have been explored; reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess Ph₂IBr proceeds readily to selectively produce this complex, which was structurally characterised as its PF₆⁻ salt. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with other potent arylating reagents (1-chloro-2,4-dinitrobenzene and 1,5-difluoro-2,4-dinitrobenzene) also produce the corresponding nitroaryl-thiolate complexes [Pt₂(μ-S){μ-SC₆H₂(NO₂)₂X}(PPh₃)₄]⁺ (X = H, F). The complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ reacts with Me₂SO₄ to produce the mixed alkyl/aryl bis-thiolate complex [Pt₂(μ-SMe)(μ-SPh)(PPh₃)₄]²⁺, but corresponding reactions with the nitroaryl-thiolate complexes are plagued by elimination of the nitroaryl group and formation of [Pt₂(μ-SMe)₂(PPh₃)₄]²⁺. [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ also reacts with Ph₃PAuCl to give [Pt₂(μ-SAuPPh₃)(μ-SPh)(PPh₃)₄]²⁺.     

A novel tetranuclear hydrogenphosphate-bridged Cu(II) cluster. Synthesis, structure, spectroscopy and magnetism of [Cu4(dpyam)4(μ4,η-HPO4)2(μ-X)2]X2(H2O)6 (X = Cl, Br)

Two novel tetranuclear compounds with an unprecedented mode of a hydrogenphosphato bridge, [Cu₄(dpyam)₄(μ₄,η³-HPO₄)₂(μ-X)₂]²⁺ (in which dpyam = di-2-pyridylamine and X = Cl (1), Br (2)) have been synthesised and characterised structurally and magnetically. The Cu(II) ions in the structures each display a square-pyramidal geometry, with two tridentate hydrogenphosphato groups bridging four copper atoms in a μ₄,η³ coordination mode which is rarely found in hydrogenphosphate metal compounds. Each (different) pair of Cu(II) ions is additionally bridged by halide ions, with relatively long Cu-X distances (2.551(3)-2.604(3) Å for 1 and 2.707(1)-2.766(2) Å for 2) and subsequently also a small Cu-X-Cu angle (65.7(1)° and 65.1(1)° for 1 and 61.6(1)° and 62.4(1) for 2) and a large Cu-X-Cu angle (95.5(1)° and 96.5(1)° for 1 and 91.1(1)° and 92.6(1)° for 2). Cu?Cu distances in the tetranuclear units varies from 2.802(3) to 5.232(3) Å for 1 and from 2.834(1) to5.233(1) Å in 2. The lattice structures are stabilised by extensive intermolecular hydrogen bonds. The magnetic susceptibility measurements down to 5 K revealed a weak ferromagnetic interaction between the outer pairs of Cu(II) ions which vary from 22 to 46 cm⁻¹ in 1 and 12 to 33 cm⁻¹ in 2 and a moderately strong antiferromagnetic interaction between the inner Cu(II) ions of −79 cm⁻¹ in 1 and −83 cm⁻¹ in 2, via the Cu-O-P-O-Cu pathway.     

A versatile entry into aqueous niobium chemistry: isolation and structure of the intermediate Nb4(μ2-O)2(μ2-OC2H5)4Cl4(OC2H5)4(HOC2H5)4

The reduction of ethanolic solutions of niobium pentachloride with zinc, followed by treatment with aqueous acids serves as a versatile entry into the aqueous solution chemistry of niobium. From the zinc-reduced solution, the major intermediate, Nb₄(μ₂-O)₂(μ₂-OC₂H₅)₄Cl₄(OC₂H₅)₄(HOC₂H₅)₄, was isolated and the crystal structure determined by X-ray crystallography. The complex crystallizes in the orthorhombic space group Pccn, with Z=4, a=21.0105(9), b=11.0387(5), c=19.1389(8), V=4438.9(3) ų, M_r=1090.19,R₁=0.0327 and wR₂=0.0876. The structure revealed a centrosymmetric tetrameric Nb(IV) complex, consisting of a pair of edge-sharing bi-octahedral Nb₂(μ₂-OC₂H₅)₄Cl₂(OC₂H₅)₂(HOC₂H₅)₂ units that are joined by two axial oxo ligands. The Nb-Nb distance of 2.7458(3) Å is consistent with a single metal-metal bond.     

Preparation, structures and properties of oxalate-bridged binuclear iron(III) complex: [(acac)2Fe(μ-ox)Fe(acac)2] and [(acac)2Fe(μ-ox)Fe(acac)2]·CH2ClCH2Cl

An oxalate-bridged binuclear iron(III) complex, [(acac)₂Fe(μ-ox)Fe(acac)₂], (acac⁻=acetylacetonate anion and ox²⁻=oxalate anion) was prepared. The complex crystallized as two types of crystals under different conditions: one had 1,2-dichloroethane as a solvent molecule of crystallization 2, the other did not 1. Both compounds have been characterized by X-ray crystallography, infrared spectroscopy, and thermogravimetric analysis. Compound 1 has also been characterized by UV-Vis and ¹H NMR spectroscopies, mass spectrometry, and electrochemistry. In both crystals, each iron(III) is coordinated in an octahedral arrangement by the oxygen atoms of an oxalate-bridging ligand and four oxygen atoms belonging to peripheral acac ligands in an octahedral arrangement. The intermetallic distance of Fe?Fe is 5.4368(9) Å in 1 and 5.438(2) Å in 2. Two iron(III) ions in each crystal are bridged by the oxalate and both lie in the oxalate-plane. The results of thermal analyses imply that the thermal stability of 2 is lower than that of 1. Cyclic voltammograms of 1 in acetonitrile and dichloromethane at low temperature showed two consecutive, quasi-Nernstian, one-electron reduction steps corresponding to the reduction of Fe^III-Fe^III to Fe^III-Fe^II followed by the reduction of Fe^III-Fe^II to Fe^II-Fe^II. The electrochemical comproportionation constants (K_c) of the equilibrium (Fe^III-Fe^III) + (Fe^II-Fe^II) ? 2(Fe^III-Fe^II) are 10^8.9 in acetonitrile medium and 10^8.5 in dichloromethane, respectively. The considerably large K_c values indicate that the main factor contributing to the stabilization of the Fe^III-Fe^II mixed-valence state is electronic delocalization through the oxalate-bridge.     

A one-dimensional copper (II) coordination polymer [Cu3(ampym)2(μ1,1-N3)4(μ1,3-N3)2(dmf)2]n (ampym = 2-aminopyrimidine) containing both end-on and end-to-end azido bridges

A new polynuclear copper (II) complex, derived from the azido-bridging ligand and 2-aminopyrimidine, has been synthesized and its 3-D structure has been determined by X-ray diffraction methods at two different temperatures. The compound crystallizes in the triclinic system space group, with the central copper atom lying on an inversion centre. The crystal structure is built up by trinuclear units (each of them contains two double end-on azido bridges) linked through two azide ions in an end-to-end (EE) fashion, to yield the polymer chain [Cu₃(ampym)₂(μ_1,1-N₃)₄(μ_1,3-N₃)₂(dmf)₂]_n. Magnetic susceptibility measurement shows a ferromagnetic interaction above 30 K, whereas a weak anti-ferromagnetic interaction prevails in the range of 30-2 K.     

Thiotungstates containing the syn-[W2(O/S)2(μ-S)2] (E = O, S) and cuboidal [W2Cu2(μ3-S)4] cores

Reaction of [W^VIS₄]²⁻ with ethane-1,2-dithiol edtH₂ in the presence of the sulfide scavenger Cd²⁺ yielded the dinuclear tungstate syn-[{(edt)W^V(O/S)}₂(μ-S)₂]²⁻ (1), with the terminal S/O disordered over the two tungsten sites in the ratio 0.8:02. In the presence of thiocyanate, phosphine and CuI, the anionic cuboidal clusters of composition [{(SCN)₃W^V}₂{Cu^I(PPh₃)}₂(μ₃-S)₄]²⁻ (2) and (3, diphos = 1,2-bis(o-diphenylphosphinophenyl)ethane), and possibly via an intermediate [{(SCN)₃W^VS}₂(μ-S)₂]⁴⁻. The crystal and molecular structures of [Et₄N]₂1, [Et₄N]₂2 · H₂O and [Et₄N]₂3 · H₂O have been determined.     

Heterobimetallic platinum-bismuth aggregates derived from [Pt2(μ-S)2(PPh3)4]

The metalloligand [Pt₂(μ-S)₂(PPh₃)₄] reacts with Bi(S₂CNEt₂)₃ or Bi(S₂COEt)₃ in methanol to produce the orange cationic adducts [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]⁺ and [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂COEt)₂]⁺, respectively, isolated as their hexafluorophosphate salts. An X-ray structure determination on [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]PF₆ reveals the presence of a six-coordinated bismuth centre with an approximately nido-pentagonal bipyramidal coordination geometry. Fragmentation pathways for both complexes have been probed using electrospray ionisation mass spectrometry; ions [Pt₂(μ-S)₂(PPh₃)₂Bi(S₂CXEt_n)₂]⁺ (X = O, n = 1, X = N, n = 2) are formed by selective loss of two PPh₃ ligands, and at higher cone voltages the species [(Ph₃P)PtS₂Bi]⁺ is observed. Ions formed by loss of CS₂ are also observed for the xanthate but not the dithiocarbamate ions.     

Chalcogenide-capped triruthenium clusters: X-ray structures of [Ru3(CO)6(μ3-CO){P(C4H3S)3}(μ-dppm)(μ3-O)] and [(μ-H)2Ru3(CO)6{P(C4H3S)3}(μ-dppm)(μ3-S)]

Treatment of [Ru₃(CO)₉{P(C₄H₃S)₃}(μ-dppm)] (1) [dppm = bis(diphenylphosphino)methane] with molecular oxygen in benzene at 60 °C affords oxo-capped [Ru₃(CO)₆(μ₃-CO){P(C₄H₃S)₃}(μ-dppm)(μ₃-O)] (2), while with elemental sulfur and selenium related chalcogenide-capped clusters [Ru₃(CO)₆(μ₃-CO){P(C₄H₃S)₃}(μ-dppm)(μ₃-E)] (3, E = S; 5, E = Se) and bis(chalcogenide) clusters [Ru₃(CO)₆{P(C₄H₃S)₃}(μ-dppm)(μ₃-E)₂] (4, E = S; 6, E = Se) result. Reaction of 1 with H₂S in refluxing THF affords the previously reported [(μ-H)₂Ru₃(CO)₇(μ-dppm)(μ₃-S)] (7) together with the new sulfido-capped dihydride [(μ-H)₂Ru₃(CO)₆{P(C₄H₃S)₃}(μ-dppm)(μ₃-S)] (8). All new compounds have been characterized by spectroscopic data, and 2 and 8 by single-crystal X-ray diffraction analyses. Oxo-capped 2 consists of a triangular ruthenium framework capped on opposite sides by oxo and carbonyl groups, while 8 consists of a ruthenium triangle by a capping sulfido ligand and two inequivalent bridging hydride ligands.     

Chalcogenolato-bridged cyclometallated binuclear palladium complexes: Synthesis, spectroscopy, structures of [Pd2(μ-Cl)(μ-SMes)(C10H6NMe2-C,N)2] and [Pd2(μ-SePh)2(C10H6NMe2-C,N)2]

Reactions of orthometallated binuclear palladium complexes with NaER, obtained by NaBH₄ reduction of R₂E₂ in methanol, gave complexes, [Pd₂(μ-ER)₂(C^∩Y)₂] (HC^∩Y = N,N-dimethylbenzylamine (C₆H₅CH₂NMe₂), N,N-dimethylnaphthylamine (C₁₀H₇NMe₂), tri-o-tolylphosphine {P(tol-o)₃}; ER=SePh, SeMes, TePh, TeMes (Mes = 2,4,6-Me₃C₆H₂). Similar reactions of [Pd₂(μ-Cl)₂(C₁₀H₆NMe₂-C,N)₂] with Pb(SMes)₂ or MesSH in the presence of NaHCO₃ gave chloro/thiolato-bridged complex [Pd₂(μ-Cl)(μ-SMes)(C₁₀H₆NMe₂-C,N)₂]. The newly synthesized complexes were characterized by elemental analysis, UV-Vis, IR, NMR (¹H, ¹³C, ³¹P, ⁷⁷Se, ¹²⁵Te) spectroscopy. These complexes crystallized out preferentially in sym-cis configuration. A low energy charge transfer transition has been identified from chalcogenolate centers to an emptyπ^∗ orbital of cyclometallated ligand in absorption spectroscopy in these complexes. The structures of [Pd₂(μ-Cl)(μ-SMes)(C₁₀H₆NMe₂-C,N)₂] (1) and [Pd₂(μ-SePh)₂(C₁₀H₆NMe₂-C,N) ₂] (3) have been established by single crystal X-ray diffraction analyses. In the former, the two palladium atoms are held together by chloro and thiolato bridges whereas in the latter, the two phenylselenolato ligands bridge two palladium atoms. The pyrolysis of [Pd(μ-TeMes)(C₁₀H₆NMe₂-C,N)]₂ (10) in a furnace gave Pd₇Te₃ whereas thermolysis in TOPO afforded primarily PdTe₂.     

Synthesis and characterisation of [Pt2(μ-S)(μ-I)(PPh3)4] - A cationic iodo analogue of the metalloligand [Pt2(μ-S)2(PPh3)4]

Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with a number of transition metal-iodo complexes leads to the formation of the cationic iodo analogue [Pt₂(μ-S)(μ-I)(PPh₃)₄]⁺, identified using electrospray ionisation mass spectrometry (ESI MS). Synthetic routes to this complex were developed, using the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with either [PtI₂(PPh₃)₂] or elemental iodine. The complex was characterised by NMR spectroscopy, ESI MS and an X-ray structure determination, which reveals the presence of a planar, disordered {Pt₂SI}⁺ core. Monitoring the iodine reaction by ESI MS allows the identification of various iodine species, including the short-lived intermediate [Pt₂(μ-S)₂(PPh₃)₄I]⁺, which allows a mechanism for the reaction to be proposed.     

Molecular structure of tetranuclear [{Mo2O(S2CNEt2)(η-O2CCF3)(μ-N-o-tol)2}2(μ-O)(μ-O2CCF3)2] formed upon addition of trifluoroacetic acid to syn-[MoO(μ-N-o-tol)(S2CNEt2)]2

Addition of trifluoroacetic acid to syn-[MoO(μ-N-o-tol)(S₂CNEt₂)]₂ in chloroform affords tetranuclear [{Mo₂O(S₂CNEt₂)(η¹-O₂CCF₃)(μ-N-o-tol)₂}₂(μ-O)(μ-O₂CCF₃)₂] which has been crystallographically characterised. It consists of four molybdenum(V) centres linked via bridging imido, trifluoroacetate and oxo ligands and results from replacement of a dithiocarbamate by two trifluoroacetate ligands.     

Reactivity of [PdCl(μ-med)]2 with monodentate or bidentate ligands. Structure of the dinuclear complexes [Pd(μ-med)(PPh3)]2(BF4)2 and [Pd(μ-med)(bpy)]2(BF4)2. [Hmed=N-(2-mercaptoethyl)-3,5-dimethylpyrazole]

Treatment of the ligand N-(2-mercaptoethyl)-3,5-dimethylpyrazole with [Pd(CH₃COO)₂]₃ and reaction of [PdCl(μ-med)]₂ with pyridine (py) or triphenylphosphine (PPh₃) in the presence of AgBF₄ produced the following complexes: [Pd(CH₃COO)(μ-med)]₂, [Pd(μ-med)(py)]₂(BF₄)₂ and [Pd(μ-med)(PPh₃)]₂(BF₄)₂. Similar reactions carried out with 2,2^′-bipyridine (bpy) or 1,3-bis(diphenylphosphino)propane (dppp) produced [Pd(μ-med)(bpy)]_x(BF₄)_x (x=1 or 2) and [Pd(μ-med)(dppp)]_x(BF₄)_x (x=1 or 2). Treatment of [Pd(μ-med)(bpy)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced [Pd₃Cl₂(μ-med)₂(bpy)₂](BF₄)₂. Treatment of [Pd(μ-med)(dppp)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced a mixture of [Pd(μ-Cl)(dppp)]₂(BF₄)₂ and [Pd(μ-med)₂(dppp)]²⁺. X-ray crystal structures of [Pd(μ-med)(PPh₃)]₂(BF₄)₂ · 2CH₃CN and [Pd(μ-med)(bpy)]₂(BF₄)₂ · 0.5CH₃OH are presented.     

Novel Rh-Mn mixed-metal carbonyl cluster containing μ3 and μ-bridging carbyne ligands, [(μ3-CC6H5)(μ-CC6H5)Rh2Mn2Cp2(μ-CO)3(CO)3]: structure, electrochemistry and catalytic properties

The cationic carbyne complex [Cp(CO)₂MnCC₆H₅]BBr₄ (1) reacts with PPN[Rh(CO)₄] (2) to give the title cluster [(μ₃-CC₆H₅)(μ-CC₆H₅) Rh₂Mn₂Cp₂(μ-CO)₃(CO)₃] (3) whose structure has been determined by X-ray diffraction. The electrochemical properties of 3 have been investigated using cyclic voltammetric method. At 60 °C and 2.0 MPa of initial total CO/H₂ (1:1) pressure, the catalytic activity of 3 towards hydroformylation of styrene has also been checked.     

N-Heterocyclic carbene gold(I) and silver(I) adducts of [Pt2(μ-S)2(PPh3)4]

Reaction of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] with the N-heterocyclic carbene (NHC) complexes IPrAuCl, IMesAuCl and IMesAgCl in methanol gave the first examples of metal adducts of [Pt₂(μ-S)₂(PPh₃)₄] that contain NHC ligands, namely [Pt₂(μ-S)₂(PPh₃)₄AuL]⁺ (L = IPr, IMes) and [Pt₂(μ-S)₂(PPh₃)₄AgIMes]⁺. The complexes were isolated as hexafluorophosphate salts. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess IPrAuCl in refluxing methanol yielded only the mono-adduct, in contrast to the behaviour with the gold(I) phosphine complex Ph₃PAuCl, which undergoes double addition giving [Pt₂(μ-SAuPPh₃)₂(PPh₃)₄]²⁺. The X-ray structure of [Pt₂(μ-S)₂(PPh₃)₄AuIPr]PF₆ was determined and reveals that the ‘free’ sulfide is substantially sterically protected by the IPr ligand, accounting for the low reactivity towards addition of a second AgIPr⁺ moiety.     

Fe-Rh and Fe-Ir clusters substituted by diphenylacetylene: Synthesis, solid state structure and electrochemical behaviour of [Fe2Ir2(CO)10(μ4:η-PhCCPh)], [FeIr2(CO)9(μ3:η-PhCCPh)], and [Fe2Rh(CO)8(μ3:η-PhCCPh)]

The reaction between [Fe₂Ir₂(CO)₁₂]²⁻ and diphenylacetylene in refluxing CH₃CN yields the substituted cluster [Fe₂Ir₂(CO)₁₀(PhC₂Ph)]²⁻ (1). In the crystals, the four metal atoms define a butterfly arrangement whose Ir-Ir hinge is parallel to the acetylenic C₂ unit. The neutral triangular cluster [FeIr₂(CO)₉(PhC₂Ph)] (2) is obtained by the treatment of 1 with acids at room temperature; in this 48 valence electrons species, the C-C and the Ir-Ir bonds are also parallel, in the coordination mode.The cluster [Fe₂Rh(CO)₁₀]⁻ reacts with diphenylacetylene in refluxing THF yielding [Fe₂Rh(CO)₈(PhC₂Ph)]⁻ (3). In this 46 C.V.E.’s cluster, the C₂ unit is perpendicular to the Fe-Fe edge, exemplifying the bonding mode. According to ¹³C NMR spectra, the structure of the three clusters is maintained in solution. Electrochemical investigations show that the one-electron oxidation of [Fe₂Ir₂(CO)₁₀(L)]²⁻ (L = 2CO, PhC₂Ph) as well as the one-electron reduction of [Fe₂Rh(CO)₈(PhC₂Ph)]⁻ only generates the respective short lived products.     

Extending the coordination chemistry of cobalt with the metalloligand [Pt2(μ-S)2(PPh3)4]: Synthesis of the first cobalt(III) derivatives

The coordination chemistry of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] towards cobalt(II) and cobalt(III) centres has been explored using an electrospray ionisation mass spectrometry (ESI MS)-directed methodology. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with CoCl₂·6H₂O in methanol gave a green-yellow suspension of the known adduct [Pt₂(μ-S)₂(PPh₃)₄CoCl₂], and the CoBr₂ adduct could be similarly prepared. When in situ-generated [Pt₂(μ-S)₂(PPh₃)₄CoCl₂] is reacted with 8-hydroxyquinoline (HQ) and base, the initial product is the cobalt(II) adduct [Pt₂(μ-S)₂(PPh₃)₄CoQ]⁺, which is then converted in air to the cobalt(III) adduct [Pt₂(μ-S)₂(PPh₃)₄CoQ₂]⁺, isolated as its hexafluorophosphate salt. The corresponding picolinate (Pic) derivative [Pt₂(μ-S)₂(PPh₃)₄Co(Pic)₂]⁺ was similarly prepared, however reaction of [Pt₂(μ-S)₂(PPh₃)₄], CoCl₂·6H₂O and 8-(tosylamino)quinoline (HTQ) produced only the cobalt(II) adduct [Pt₂(μ-S)₂(PPh₃)₄CoTQ]⁺. Reactions of [Pt₂(μ-S)₂(PPh₃)₄], CoCl₂·6H₂O and dithiocarbamates gave cobalt(III) complexes [Pt₂(μ-S)₂(PPh₃)₄Co(S₂CNR₂)₂]⁺ [R = Et or R₂ = (CH₂)₄], and proceeded much more rapidly, consistent with the known ability of the dithiocarbamate ligand to stabilize cobalt in higher oxidation states. A study of the fragmentation of cobalt(III) adducts by positive-ion ESI mass spectrometry indicated that [Pt₂(μ-S)₂(PPh₃)₄CoQ₂]⁺ fragments to form the radical cation [Pt₂(μ-S)₂(PPh₃)₄]⁺, which could also be generated by ESI MS analysis of [Pt₂(μ-S)₂(PPh₃)₄] in methanol-NaOH solution. In contrast, the corresponding indium(III) derivative [Pt₂(μ-S)₂(PPh₃)₄InQ₂]⁺, and the cobalt(III) dithiocarbamate [Pt₂(μ-S)₂(PPh₃)₄Co(S₂CN(CH₂)₄)₂]⁺ are much more reluctant to fragment under analogous conditions, and the differences are discussed in terms of cobalt(III) redox chemistry.     

Ru2(CO)4(OOCR)2(PPh3)2 sawhorse-type complexes containing μ2-η-carboxylato ligands derived from biologically active acids

The thermal reaction of Ru₃(CO)₁₂ with the biologically active acids acetyl salicylic acid (Aspirin), α-methyl-4-(isobutyl)phenylacetic acid (Ibuprofen) and 3α,7α,12α-trihydroxy-5β-cholanic acid (cholic acid) in refluxing tetrahydrofuran, followed by addition of triphenylphosphine, gives the dinuclear complexes Ru₂(CO)₄(OOCR)₂(PPh₃)₂ (1: R = C₆H₄-2-OCOMe, 2: R = CHMe-C₆H₄-4-Buⁱ, 3: C₂₃H₃₉O₃). The single-crystal structural analysis of 1 and 2 reveals a dinuclear Ru₂(CO)₄ sawhorse structure, the diruthenium backbone being bridged by the carboxylato ligands, while the two phosphine ligands occupy the axial positions at the ruthenium atoms. However, chiral carbon atoms in the carboxylic acid undergo racemisation during the thermal reaction.     

The complexes with end-to-end dicyanamide bridges: syntheses, characterization and crystal structures of [Cu(μ1,5-dca)2(phen)]n and [Cd(μ1,5-dca)2(py)2]n (phen=phenanthroline; py=pyridine; dca=dicyanamide, N(CN)2 )

Two new dicyanamide (dicyanamide=[N(CN)₂]⁻, dca) bridged complexes, [Cu(μ_1,5-dca)₂(phen)]_n (1) and [Cd(μ_1,5-dca)₂(py)₂]_n (2) have been synthesized and their structures have been determined by X-ray crystallography diffraction. Complex 1 crystallizes in the monoclinic space group P2(1)/c with a=10.1502(3), b=10.9815(4), c=14.5839(4) Å and Z=4. The adjacent copper atoms are connected by single end-to-end dca bridges to form a chain structure along the b axis. The chains are linked via Cu?N weak interactions to give rise to a 2D layer structure, which furthermore into a 3D structure by the π-π interaction between aromatic rings of adjacent layers. Complex 2 crystallizes in the monoclinic space group C2/m with a=6.6849(10), b=17.476(2), c=13.231(2) Å and Z=4. The cadmium(II) center is six-coordinated with a distorted octahedral geometry, bounded to four N atoms of four dca ligands and two N atoms of two-chelated py ligands. Neighbor Cd(II) atoms are linked by the double end-to-end dca bridges to generate a chain structure, which result in a 2D layer structure through the π-π interactions between the adjacent chains with distances 3.641 Å. EPR and magnetic results of 1 suggest that the complex exhibits a weak ferromagnetic interaction through CuNCNCNCu pathways.