Synthesis and structure of iron (III) and iron (II) complexes in S4P2 environment created by diethyldithiocarbamate and 1,2-bis(diphenylphosphino)ethane chelation: Investigation of the electronic structure of the complexes by Mössbauer and magnetic studies

Iron (II) and iron (III) complexes, [Fe^II(DEDTC)₂(dppe)] · CH₂Cl₂ (1), [Fe^II(ETXANT)₂(dppe)] (2) (DEDTC = diethyldithiocarbamate, ETXANT = ethyl xanthate, dppe = 1,2-bis (diphenylphosphino) ethane), and [Fe^III(DEDTC)₂(dppe)] [Fe^IIICl₄] (3) have been synthesized and characterized. Since 3 contains two magnetic centers, an anion metathesis reaction has been conducted to replace the tetrahedral FeCl₄⁻ by a non-magnetic BPh₄⁻ ion producing [Fe^III(DEDTC)₂(dppe)]BPh₄ (4) for the sake of unequivocal understanding of the magnetic behavior of the cation of 3. With the similar end in view, the well-known FeCl₄⁻ ion, the counter anion of 3, is trapped as PPh₄[Fe^IIICl₄] (5) and its magnetic property from 298 to 2 K has been studied. Besides the spectroscopic (IR, UV-Vis, NMR, EPR, Mass and XPS) characterization of the appropriate compounds, especially 2, others viz. 1, 3 and 4 have been structurally characterized by X-ray crystallography. While Fe^II complexes, 1 and 2, are diamagnetic, the Fe^III systems, namely the cations of 3, and 4 behave as low-spin (S = 1/2) paramagnetic species from 298 to 50 K. Below 50 K 3 shows gradual increase of χ_MT up to 2 K suggesting ferromagnetic behavior while 4 exhibits gradual decrease of magnetic moment from 60 to 2 K, indicating the occurrence of weak antiferromagnetic interaction. These conclusions are supported by the Mössbauer studies of 3 and 4. The Mössbauer pattern of 1 exhibits a doublet site for diamagnetic (2-400 K) Fe^II. The compounds 1, 2 and 4 encompass interesting cyclic voltammetric responses involving Fe^II, Fe^III and Fe^IV.     

Synthesis and reactivity with amines of new diiron alkynyl methoxy carbene complexes

The new diiron alkynyl methoxy carbene complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CCR′}(Cp)₂]⁺ (R = 2,6-Me₂C₆H₃ (Xyl), R′ = Tol, 3a; R = Xyl, R′ = Ph, 3b; R = Xyl, R′=Buⁿ, 3c; R = Xyl, R′=SiMe₃, 3d; R = Me, R′ = Tol, 3e; R = Me, R′ = Ph, 3f) are obtained in two steps by addition of R′CCLi (R′ = Tol, Ph, Buⁿ, SiMe₃) to the carbonyl aminocarbyne complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂]⁺ (R = Xyl, 1a; Me, 1b), followed by methylation of the resulting alkynyl acyl compounds [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(O)CCR′}(Cp)₂] (R = Xyl, R′ = Tol, 2a; R = Xyl, R′ = Ph, 2b; R = Xyl, R′ = Buⁿ, 2c; R = Xyl, R′ = SiMe₃, 2d; R = Me, R′ = Tol, 2e; R = Me, R′ = Ph, 2f). Complexes 3 react with secondary amines (i.e., Me₂NH, C₅H₁₀NH) to give the 4-amino-1-metalla-1,3-dienes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CHC(R′)(NMe₂)}(Cp)₂]⁺ (R = Xyl, R′ = Tol, 4a; R = Xyl, R′ = Ph, 4b; R = Me, R′ = Ph, 4c) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(Tol)(NC₅H₁₀)}(Cp)₂]⁺, 5. The addition occurs stereo-selectively affording only the E-configured products. Analogously, addition of primary amines R′NH₂ (R′ = Ph, Et, Prⁱ) affords the 4-(NH-amino)-1-metalla-1,3-diene complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(R)(NHR′)}(Cp)₂]⁺ (R = Ph, 6a; Et, 6b; Prⁱ, 6c). In the case of 6a, only the E isomer is formed, whereas a mixture of the E and Z isomers is present in the case of 6b,c, with prevalence of the latter. Moreover, the two isomeric forms exist under dynamic equilibrium conditions, as shown by VT NMR studies. Complexes 6 are deprotonated by strong bases (e.g., NaH) resulting in the formation of the neutral vinyl imine complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(NR)(Tol)}(Cp)₂] (R = Ph, 7a; Et, 7b; Prⁱ, 7c); the reaction can be reverted by addition of strong acids. X-ray crystal structures have been determined for 3a[CF₃SO₃] · Et₂O, 4c[CF₃SO₃], 6a[BF₄] · CH₂Cl₂, 6c[CF₃SO₃] · 0.5Et₂O and 7a · CH₂Cl₂.     

Synthesis, reactivities and catalytic carbonylation of rhodium(I) carbonyl complexes containing isomeric acetylpyridine ligands

[Rh(CO)₂Cl]₂ reacts with two mole equivalent of 2-acetylpyridine (a), 3-acetylpyridine (b) and 4-acetylpyridine (c) to afford chelate [Rh(CO)Cl(η²-N∩O)] (1a) and non-chelate [Rh(CO)₂Cl(η¹-N∼O)] (1b, 1c) complexes, where, N∩O = a, N∼O = b, c. Oxidative addition (OA) of 1a-1c with CH₃I and C₂H₅I yields penta coordinate rhodium(III) complexes, [Rh(COR)ClI(η²-N∩O)] {R = -CH₃ (2a); -C₂H₅ (3a)} and [Rh(COR)(CO)ClI(η¹-N∼O)] {R = -CH₃ (2b, 2c); -C₂H₅ (3b, 3c)}. Kinetic study for the reaction of 1a-1c with CH₃I indicates a pseudo-first order reaction. The catalytic activity of 1a-1c for the carbonylation of methanol to acetic acid and its ester was evaluated at different initial CO pressures 5, 10 and 20 bar at ∼25 °C and higher turn over numbers (TON = 1581-1654) were obtained compared to commercial Monsanto’s species [Rh(CO)₂I₂]⁻ (TON = 1000) under the reaction conditions: temperature = 130 ± 1 °C, pressure = 15-32 bar, rpm = 450, time = 1 h and catalyst: substrate = 1: 1900.     

Supramolecular assembly driven by hydrogen-bonding and π-π stacking interactions based on copper(II)-terpyridyl complexes

Six 2D and 3D supramolecular complexes [Cu(L1)(O₂CCH₃)₂] · H₂O (1), [Cu₂(L2)₂(μ₂-O₂CCH₃)₂](BF₄)₂ (2), [Cu₂(L1)₂(BDC)(NO₃)₂] · 0.5H₂O (3) [Cu₂(L2)₂(BDC)(NO₃)₂] (4), [Cu₂(L3)₂(BDC)(NO₃)₂] · 0.5H₂O (5) and [Cu₂(L2)₂(BDC)(H₂O)₂](BDC) · 8H₂O (6) (L1 = 4′-(4-pyridyl)-2,2′:6′,2″-terpyridine, L2 = 4′-(2-pyridyl)-2,2′:6′,2″-terpyridine, L3 = 4′-phenyl-2,2′:6′,2″-terpyridine, BDC = 1,4-benzenedicarboxylate), have been prepared and structurally characterized by X-ray diffraction crystallography. In complexes 1, 3, and 4, 1D channels are formed through C-H?O and C-H?N hydrogen-bonding interactions, and further linked into 3D structure via C-H?O and O-H?O interactions. Complex 2 is a 2D layer constructed from intermolecular C-H?F and π-π stacking interactions. In the structure of 6, the BDC²⁻ ions and solvent water molecules form a novel 2D layer containing left- and right-handed helical chains via hydrogen-bonds, and an unusual discrete water octamer is formed within the layer. In 2, 4, 6 and [Ag₂(L2)₂](PF₆)₂ (7) the bonding types of pendent pyridines of L2 depending on the twist about central pyridines are involved in intramolecular (2 and 4), intermolecular (6) or coordination bonds (7) in-twist-order of 5.8°, 3.7°, 28.2° and 38.0°, respectively. Differently, the pendent pyridines of L1 in 1 and 3 form intermolecular hydrogen bonds despite of distinct corresponding twist angles of 25.1° (1) and 42.6°(3). Meanwhile, π-π stacking interactions are present in 1-6 and responsible for the stabilization of these complexes.     

Biotechnological application of homo- and heterotrinuclear iron(III) furoates for cultivation of iron-enriched Spirulina

New trinuclear iron(III) furoates with the general formula [Fe₃O(α-fur)₆(R-OH)₃]X, where α-fur C₄H₃OCOO, R = CH₃ (1), C₂H₅ (2), n-C₃H₇ (3), n-C₄H₉ (4), X = NO₃⁻ (1-4); [Fe₃O(α-Fur)₆(DMF)(CH₃OH)₂]NO₃ (5); [Fe₃O(α-Fur)₆(H₂O)(CH₃OH)₂]Cl (6); [Fe₂MO(α-Fur)₆(L)(H₂O)₂], where L = THF (7-9), DMF (10-12), M = Mn²⁺ (7, 10), Co²⁺ (8, 11), Ni²⁺ (9, 12) and [Fe₂MO(α-Fur)₆(3Cl-Py)₃], where M = Mn²⁺ (13), Co²⁺ (14), Ni²⁺ (15); have been prepared and investigated by Mössbauer and IR spectroscopy. The X-ray crystal structure for the 1·2CH₃OH complex indicates that it crystallizes in the monoclinic crystal system (P2₁/n) and has a structure typical of μ₃-O-bridged trinuclear iron(III) compounds. Coordination compounds 1, 4, 7, 8 can be used as regulators of the biochemical composition of cyanobacterium Spirulina platensis biomass. The supplementation of these compounds, in concentrations exceeding 5-10 mg/l, increases the content of iron, amino acids, peptides and carbohydrates in Spirulina.     

Lewis-base copper(I) formates: Synthesis, reaction chemistry, structural characterization and their use as spin-coating precursors for copper deposition

Consecutive synthesis methodologies for the preparation of a series of copper(I) formates [L_mCuO₂CH] (L = ⁿBu₃P: 4a, m = 1; 4b, m = 2; 5, L = [Ti](CCSiMe₃)₂, m = 1, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) and [L_mCuO₂CH·HO₂CR] (L = ⁿBu₃P: 7a, m = 1, R = H; 7b, m = 2, R = H; 7c, m = 2, R = Me; 7d, m = 2, R = CF₃; 7e, m = 2, R = Ph. L = (^cC₆H₁₁)₃P, R = H: 8a, m = 2; 8b, m = 3. L = (CF₃CH₂O)₃P, R = H: 9a, m = 2; 9b, m = 3. L = (CH₃CH₂O)₃P, R = H: 10a, m = 2; 10b, m = 3. L = [Ti](CCSiMe₃)₂; m = 1: 11a, R = H; 11b, R = Ph) is reported using [CuO₂CH] (1) and L (2a, L = ⁿBu₃P; 2b, L (^cC₆H₁₁)₃P; 2c, L = (CF₃CH₂O)₃P; 2d, L = (CH₃CH₂O)₃P; 3, L = [Ti](CCSiMe₃)₂) as key starting materials. Addition of formic acid (6a) or carboxylic acid HO₂CR (6b, R = Me; 6c, R = CF₃; 6d, R = Ph) to the afore itemized copper(I) formates 4 and 5 gave metal-organic or organometallic 7-11. The molecular structures of 8a and 11a in the solid state are reported showing a threefold coordinated copper(I) ion, setup by either two coordinatively-bonded phosphorus atoms and one formate oxygen atom (8a) or two π-bonded alkyne ligands and one oxygen atom (11a). A formic acid molecule is additionally hydrogen-bonded to the CuO₂CH moiety. The use of 7b as suitable precursor for the deposition of copper onto TiN-coated oxidized silicon wafers by the spin-coating process below 300 °C is described. Complex 7b offers an appropriate transformation behavior into metal phase by an elimination-decarboxylation mechanism. The morphology of the copper films strongly depends on the annealing conditions. A closed grain network densified by a post-treatment is obtained (8 °C min⁻¹, N₂/H₂ carrier gas). Hydrogen post-anneal to 420 °C after film deposition gave a copper film showing resistivities from 2.5 to 3.7 μΩ cm. This precursor was also used for gap-filling processes.     

Hydrogen-halide versus alkyl-halide oxidative addition in dimethyl platinum(II) complexes: Crystal structure of [PtBr2(bpy)]

Dimethyl platinum(II) complexes [PtMe₂(NN)] {NN = bu₂bpy (4,4′-di-tert-butyl-2,2′-bipyridine) (1a), bpy (2,2′-bipyridine) (1b), phen (1,10-phenanthroline) (1c)} reacted with commercial 3-bromo-1-propanol in the presence of 1,3-propylene oxide to afford cis, trans- [PtBrMe₂{(CH₂)₃OH}(NN)] (NN = bu₂bpy (2a), bpy (2b), phen (2c)). On the other hand, [PtMe₂(NN)] (1a)-(1b) reacted with the trace of HBr in commercial 3-bromo-1-propanol to give [PtBr₂(NN)] (NN = bu₂bpy (3a), bpy (3b)). The reaction pathways were monitored by ¹H NMR at various temperatures. Treatment of 1a-1b with a large excess of 3-bromo-1-propanol at −80 °C gave the corresponding methyl(hydrido)platinum(IV) complexes [PtBr(H)Me₂(NN)] (NN = bu₂bpy (4a), bpy (4b)) via the oxidative addition of dimethyl platinum(II) complexes with HBr. The complexes [PtBr(H)Me₂(NN)] decomposed by reductive elimination of methane above −20 °C for bu₂bpy and from −20 to 0 °C for bpy analogue to give methane and platinum(II) complexes [PtBrMe(NN)] (5a)-(5b) and then decomposed at about 0 °C to yield [PtBr₂(NN)] and methane. When the reactions were performed at a molar ratio of Pt:RX/1:10, the corresponding complexes [PtBrMe(NN)] (5a)-(5b) were also obtained. The crystal structure of the complex 3b shows that platinum adopts square planar geometry with a twofold axis through the platinum atom. The Pt…Pt distance (5.164 Å) is considerably larger than the interplanar spacing (3.400 Å) and there is no platinum-platinum interaction.     

Synthesis and characterization of cationic rhodium(I) dicarbonyl complexes

Treatment of Rh(acac)(CO)₂ (acac = acetoacetonate) with perchloric acid followed by addition of an α-diimine (α-diimine = 1,4-bis(Ar)-2,3-dimethyl-1,4-diaza-1,3-butadiene, Ar = 3,5-dimethylphenyl, 1; 3,5-di-tert-butylphenyl, 2; and 3,4,5-trimethoxyphenyl, 3; phenyl, 4; and 4-chlorophenyl, 5) generates a series of complexes of the type [Rh(α-diimine)(CO)₂][ClO₄] 6-10 with varying electronic properties of the supporting diimine ligand. X-ray crystal structures have been determined for the α-diimine ligands 1-5, and complexes 6, 8, and 10.     

Synthesis, characterization and olefin metathesis studies of a family of ruthenium phosphonium alkylidene complexes

The synthesis of four ruthenium phosphonium alkylidene complexes [(H₂IMes)Cl₂RuCH(PCy₃)]⁺[A]⁻ (1, A = B(C₆F₅)₄; 2, A = BF₄; 3, A = OTf; 4, A = BPh₄), differing only in the anion is described. The X-ray structures of 1, 3 and 4 show them to be isostructural in the cation, with no interaction between the Ru centers and the anion. Ring closing metathesis of a substrate to a six-membered methylcyclohexene at 0 °C in CD₂Cl₂ using 1 mol% catalyst, shows that catalysts 1-4 behave very similarly, and exhibit superior activity in comparison to Grubbs second generation and fast-initiating catalysts.     

Calix[4]arene supported group 5 imido complexes

The reaction of imidoyl chlorides [V(NR)Cl₃] (R = Ph 1, Tol 2, tBu 3) and calix[4]arene methyl ether H₃Mecalix unexpectedly leads to the formation of the structurally characterized vanadium (IV) complex [VCl(Mecalix)] (4). Calix[4]arene methyl ether stabilized imido complexes of the type [V(NR)(Mecalix)] (R = Ph 7, Tol 8, tBu 9) were afforded from the reaction of [V(NR)Cl₃] (R = Ph 1, Tol 2, tBu 3) and the tris(lithium) or tris(sodium) salt of the calix[4]arene ether. The lithium salt [{Li₃(Mecalix)}₂] (5) is a dimer in the solid state, in which two monomeric trianions are bridged by lithium cations. Imido complexes [M(NR)(Mecalix)] (M = Nb: R = tBu, 12, R = Tol 13, R = Mes 14, R = Dipp 15; M = Ta: R = tBu 16, R = Tol 17) (Tol = 4-C₆H₄Me, Mes = 2,6-C₆H₃Me₂; Dipp = 2,6-C₆H₃iPr₂) have been prepared from structurally characterized [NbCl₂(Mecalix)] (10) and previously known [TaCl₂(Mecalix)] (11) via reaction with two equivalents of the appropriately metallated (Li, K) primary amine. The molecular structures of 13 and 15 confirm the mononuclear nature of these complexes.     

Triorganotin(IV) complexes of Schiff base derived from 6-amino-2-mercaptobenzothiazole: Synthesis, characterization and X-ray crystal structures

Nine triorganotin(IV) complexes of the type R₃SnL (L = L1 R = Me 1, Ph 2, PhCH₂3; L = L2 R = Me 4, Ph 5, PhCH₂6; L = L2 R = Me 7, Ph 8, PhCH₂9) have been obtained by reaction of new Schiff base HL1, HL2 or HL3 with triorganotin(IV) chloride in the presence of sodium ethoxide. All the complexes 1-9 were characterized by elemental, IR and NMR spectra analyses. Except for complexes 3, 4, 6, 9, the others were also characterized by X-ray crystallography diffraction analyses, which revealed that complexes 1, 2, 5, 7, 8 were four coordinated and displayed a capped tetrahedron.     

Construction of carbon chains on ruthenium and osmium carbonyl clusters

We have used the elimination of AuX(PR₃) (X = halide, R = Ph, tol) that occurs in reactions of alkynylgold(I)-phosphine complexes with M₃(μ-H)₃ (μ₃-CBr) (CO)₉ (M = Ru, Os) to prepare the complexes M₃(μ-H)₃(μ₃-CCCR)(CO)₉ [M = Ru, R = Ph 2, CCSiMe₃3, Fc 4, CCFc 6-Ru, CC[Ru(PPh₃)₂Cp] 8; M = Os, R = CCFc 6-Os, CCCCFc 7], Fc′{(μ₃-CCC)Ru₃(μ-H)₃(CO)₉}₂5, and bis-cluster-capped carbon chain complexes {M₃(μ-H)₃(CO)₉}₂{μ₃:μ₃-C(CC)_nC} (M = Ru, n = 2 9, 3 10-Ru; M = Os, n = 3 10-Os) and {(L)(OC)₈(μ-H)₃M₃}C(CC)_nC{Co₃(μ-dppm)(CO)₇} (n = 1, M = Ru, L = CO 11, PPh₃12-Ru/P; n = 2, L = CO 12-Ru, PPh₃13; M = Os, L = CO 12-Os) in good to excellent yields. X-ray structural determinations of 2-5, 6-Ru, 6-Os, 7, 9, 11, 12-Ru, 12-Os and 12-Ru/P are reported.     

Palladium(II), platinum(II), ruthenium(II) and mercury(II) complexes of potentially tridentate Schiff base ligands of (E, N, O) type (E = S, Se, Te): Synthesis, crystal structures and applications in Heck and Suzuki coupling reactions

Schiff bases of 2-hydroxybenzophenone (HBP) (C₆H₅)(2-HOC₆H₄)CN(CH₂)_nEAr (L1/L2: E = S, Ar = Ph, n = 2/3; L3/L4: E = Se, Ar = Ph, n = 2/3; L5/L6: E = Te, Ar = 4-MeOC₆H₄, n = 2/3) and their complexes [PdCl(L-H)] (L = L1−L6; 1, 2, 3, 5, 7, 11), [PtCl(L3-H/L5-H)] (4/8), [PtCl₂(L4/L6)₂] (6/12), [(p-cymene)RuCl(L5/L6)]Cl (9/13) and [HgBr₂(L5/L6)₂] (10/14) have been synthesized and characterized by proton, carbon-13, selenium-77 and tellurium-125 NMR, IR and mass spectra. Single crystal structures of L1, 1, 3, 4, 5 and 7 were solved. The Pd-E bond distances (Å): 2.2563(6) (E = S), 2.3575(6)−2.392(2) (E = Se); 2.5117(5)−2.5198(5) (E = Te) are near the lower end of the bond length range known for them. The Pt-Se bond length, 2.3470(8) Å, is also closer to the short values reported so far. The Heck and Suzuki reaction were carried out using complexes 1, 3, 5 and 7 as catalysts under aerobic condition. The percentage yields for trans product in Heck reaction were found upto 85%.     

Synthesis and characterization of isopropylamine complexes of lanthanide(II) diiodides: Molecular structure of TmI2(PrNH2)4 and EuI2(PrNH2)4

It was found that the lanthanide diiodides LnI₂ (1) (Ln = Nd, Sm, Eu, Dy, Tm, Yb) are dissolved in isopropylamine (IPA) without redox transformations. Stability of the formed solutions decreases in a row Eu ≈ Yb > Sm > Tm > Dy > Nd. Removing of a solvent in vacuum leaves complexes LnI₂(IPA)_x (2) (Nd, x = 5; Sm, Eu, Dy, Tm, Yb, x = 4) as crystalline colored solids. Stability of 2-Nd,Dy,Tm is higher than that of known THF or DME coordinated salts. Divalent state of metal in the products is confirmed by data of UV-Vis spectroscopy, magnetic measurements and their chemical behavior. Structure of 2-Eu and 2-Tm was established by X-ray diffraction analysis. Oxidation of 2-Nd,Dy in IPA affords amine-amides (PrⁱNH)Ln(IPA)_y (3) (Nd, y = 4; Dy, x = 3). n-Propylamine also dissolves the iodides 1-Sm,Eu,Dy,Tm,Yb but stability of the solutions is significantly lower. 1-Nd vigorously reacts with PrⁿNH₂ even at −30 °C which hampers the formation of the solution.     

The first iron(III) complexes with cyclin-dependent kinase inhibitors: Magnetic, spectroscopic (IR, ES+ MS, NMR, Fe Mössbauer), theoretical, and biological activity studies

The first Fe^III complexes 1-6 with cyclin-dependent kinase (CDK) inhibitors of the type [Fe(L_n)Cl₃]·nH₂O (n = 0 for 1, 1 for 2, 2 for 3-6; L₁-L₆ = C2- and phenyl-substituted CDK inhibitors derived from 6-benzylamino-9-isopropylpurine), have been synthesized and characterized by elemental analysis, IR, ⁵⁷Fe Mössbauer, ¹H and ¹³C NMR, and ES+ mass spectroscopies, conductivity and magnetic susceptibility measurements, and thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The study revealed that the compounds are mononuclear, tetrahedral high-spin (S = 5/2) Fe^III complexes with an admixture of an S = 3/2 spin state originating probably from five-coordinated Fe^III ions either connecting with a bidentate coordination mode of the CDK inhibitor ligand or relating to the possibility that one crystal water molecule enters the coordination sphere of the central atom in a portion of molecules of the appropriate complex. Nearly spin-only value of the effective magnetic moment (5.82 μ_eff/μ_B) was determined for compound 1 due to absence of crystal water molecule(s) in the structure of the complex. Based on NMR data and DFT calculations, we assume that the appropriate organic ligand is coordinated to the Fe^III ion through the N7 atom of a purine moiety. The cytotoxicity of the complexes was tested in vitro against selected human cancer cell lines (G-361, HOS, K-562 and MCF-7) along with the ability to inhibit the CDK2/cyclinE kinase. The best cytotoxicity (IC₅₀: 4-23 μM) and inhibition activity (IC₅₀: 0.02-0.09 μM) results have been achieved in the case of complexes 2-4, and complexes 3, 4 and 6, respectively. In addition, the X-ray structure of 2-chloro-6-benzylamino-9-isopropylpurine, i.e. a precursor for the preparation of L₁, L₄ and L₅, is also described.     

Structures from powders: Diflorasone diacetate

Diflorasone diacetate, a steroid anti-inflammatory drug (marketed as Diacort^® or Florone^® by Pfizer) and used in the treatment of skin disorders, can be prepared as anhydrous form, DD1 (as deposited in the US pharmacopoeia), or as a monohydrated phase, DDW. Heating the DDW form above 90 °C, a mixture of DD1 and of a new anhydrous polymorph, DD2 is obtained. Further heating of this mixture, or of pure DD1, up to 230 °C (only a few degrees before melting!), generates an elusive anhydrous DD3 polymorph. Their crystal structures, determined uniquely from laboratory powder diffraction data, show the isomorphous character of the DDW and DD1 forms, while the DD2 and DD3 polymorphs crystallize with markedly different unit cells. Crystals of the DD1, DD2 and DDW forms are orthorhombic, P2₁2₁2₁, a = 29.386(1) Å; b = 10.4310(9) Å, c = 8.1422(7) Å, V = 2495.8(3) Å³ for DD1; a = 15.2639(10) Å; b = 11.7506(7) Å, c = 13.8931(11) Å, V = 2491.9(3) Å³ for DD2; a = 30.311(2) Å; b = 10.6150(9) Å, c = 7.9337(7) Å, V = 2552.7(4) Å³ for DDW; while the lattice parameters for the monoclinic P2₁DD3 species are a = 11.5276(10) Å; b = 13.8135(11) Å, c = 7.8973(7) Å, β = 103.053(6)°, V = 1225.0(2) Å³. These compounds have also been fully characterized by thermo analytical methods, as well by ¹³C, ¹⁹F, and ¹H NMR spectroscopy.     

Iron-oxidation-state-dependent O-O bond cleavage of meta-chloroperbenzoic acid to form an iron(IV)-oxo complex

The mechanism of formation of [Fe^IV(O)(N4Py)]²⁺ (2, N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine) from the reaction of [Fe^II(N4Py)(CH₃CN)]²⁺ (1) with m-chloroperbenzoic acid (mCPBA) in CH₂Cl₂ at −30 °C has been studied on the basis of the visible spectral changes observed and the reaction stoichiometry. It is shown that the conversion of 1 to 2 in 90% yield requires 1.5 equiv. peracid and takes place in two successive one-electron steps via an [Fe^III(N4Py)OH]²⁺(3) intermediate. The first oxidation step uses 0.5 equiv. peracid and produces 0.5 equiv. 3-chlorobenzoic acid, while the second step uses 1 equiv. peracid and affords byproducts derived from chlorophenyl radical. We conclude that the Fe^II(N4Py) center promotes O-O bond heterolysis, while the Fe^III(N4Py) center favors O-O bond homolysis, so the nature of O-O bond cleavage is dependent on the iron oxidation state.     

Diiron and diruthenium aminocarbyne complexes containing pseudohalides: stereochemistry and reactivity

Acetonitrile is easily displaced from [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(MeCN)(Cp)₂][SO₃CF₃] (R = 2,6-Me₂C₆H₃ (Xyl) (1a); Me (1b)) upon stirring in THF at room temperature in the presence of [NBu₄][SCN]. The resulting complexes trans-[Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCS)(Cp)₂] (R = Xyl (trans-2a); Me (trans-2b)) are completely isomerised to cis-[Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCS)(Cp)₂] (R = Xyl (cis-2a); Me (cis-2b)) when heated at reflux temperature. Similarly, the complexes cis-[M₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCO)(Cp)₂] (M = Fe, R = Me (4a); M = Ru, R = Xyl (4b); M = Ru, R = Me (4c)) and cis-[M₂{μ-CN(Me)(R)}(μ-CO)(CO)(N₃)(Cp)₂] (M = Fe, R = Xyl (5a); M = Fe, R = Me (5b); M = Ru, R = Xyl (5c)) can be obtained by heating at reflux temperature a THF solution of [M₂{μ-CN(Me)(R)}(μ-CO)(CO)(MeCN)(Cp)₂][SO₃CF₃] (M = Fe, R = Xyl (1a); M = Fe, Me (1b); M = Ru, R = Xyl (1c); M = Ru, R = Me (1d)) in the presence of NaNCO and NaN₃, respectively. The reactions of 5 with MeO₂CCCCO₂Me, HCCCO₂Me and (NC)(H)CC(H)(CN) afford the triazolato complexes [M₂{μ-CN(Me)(R)}(μ-CO)(CO){N₃C₂(CO₂Me)₂}(Cp)₂] (M = Fe, R = Xyl (6a); M = Fe, R = Me (6b); M = Ru, R = Xyl (6c)), [M₂{μ-CN(Me)(R)}(μ- CO)(CO){N₃C₂(H)(CO₂Me)}(Cp)₂] (M = Fe, R = Me (7a); M = Ru, R = Xyl (7b)) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){N₃C₂(H)(CN)}(Cp)₂] (8), respectively. The asymmetrically substituted triazolato complexes 7-8 are obtained as mixtures of N(1) and N(2) bonded isomers, whereas 6 exists only in the N(2) form. Methylation of 6-8 results in the formation of the triazole complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){N₃(Me)C₂(CO₂Me)₂}(Cp)₂][CF₃SO₃] (9), [M₂{μ-CN(Me)(R)}(μ-CO)(CO){N₃(Me)C₂(H)(CO₂Me)}(Cp)₂][CF₃SO₃] (M = Fe, R = Me (10a); M = Ru, R = Xyl (10b)) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){N₃(Me)C₂(H)(CN)}(Cp)₂][CF₃SO₃], 11. The crystal structures of trans-2b, 4b · CH₂Cl₂, 5a, 6b · 0.5CH₂Cl₂ and 8 · CH₂Cl₂ have been determined.     

Synthesis and characterization of ether-derivatized aminophosphines and their application in C-C coupling reactions

Four new bis(phosphino)amine ligands (Ph₂P)₂N-C₆H₃-R, where R = 3,5-OMe (1), 2,5-OMe (2), 2,4-OMe (3) or 3,4-OMe (4), were prepared via aminolysis of the corresponding dimethoxyanilines with 2 equiv. of diphenylphosphine chloride in the presence of triethyl amine. Oxidation of these ligands with aqueous H₂O₂, elemental S₈ or Se powder afforded the corresponding chalcogen oxides 1a-4a, sulfides 1b-4b and selenides 1c-4c in good yields. Reaction of 1-4 with [MCl₂(cod)] (M = Pt, Pd; cod = cycloocta-1,5-diene) in equimolar ratios afforded cis-[MCl₂{(Ph₂P)₂N-C₆H₃-R}] (M = Pt; R = 3,5-OMe 1d, R = 2,5-OMe 2d, R = 2,4-OMe 3d, and R = 3,4-OMe 4d. M = Pd; R = 3,5-OMe 1e, R = 2,5-OMe 2e, R = 2,4-OMe 3e, and R = 3,4-OMe 4e). Similarly, reaction of [Cu(CH₃CN)₄]PF₆ with the 1-4 in 1:2 ratio gave [Cu{(Ph₂P)₂N-C₆H₃-R}₂]PF₆ (R = 3,5-OMe 1f, 2,5-OMe 2f, 2,4-OMe 3f and 3,4-OMe 4f). All new compounds were fully characterized by spectroscopy and elemental analysis and the molecular structures of seven representative compounds were determined by single-crystal X-ray crystallography. In addition, the palladium complexes were investigated as pre-catalysts in C-C coupling reactions.     

Syntheses and characterization of titanium malonato and amino acid complexes: [Ti(cp)2(OOCCH2NMe2)] - The first structurally characterized α-amino acid titanium(III) complex

The reaction of [Ti(cp^∗)₂(BTMSA)] (1) (cp^∗ = η⁵-C₅Me₅, BTMSA = bis(trimethylsilyl)acetylene) with malonic acids ((HOOC)₂CR₂, R = H, Me) and N,N-dimethylglycine resulted in the formation of titanium(IV) dicarboxylato complexes [Ti(cp^∗)₂{(OOC)₂CR₂}] (R = H, 2; R = Me, 3) and an α-amino acid titanium(III) complex [Ti(cp^∗)₂(OOCCH₂NMe₂)] (4). The identities of complexes 2-4 were confirmed by microanalysis, ¹H and ¹³C NMR spectroscopy (2, 3), ESI-MS and CID experiments (2, 3) as well as by ESR and magnetic measurements (μ_eff = 1.81, 298 K) for 4. Single X-ray diffraction analyses of 2 and 4 exhibited monomolecular complexes in which the titanium atom is distorted tetrahedrally coordinated by two η⁵-C₅Me₅ rings and by the chelating bound malonato-κ²O,O′ (2) and N,N-dimethylglycinato-κ²O,O′ ligand (4).