The synthesis, characterization, and alkylation of nacnac chromium triflate derivatives

A Cr(III) triflate coordinated by the bulky β-diketiminate ^MeL^iPr (^MeL^iPr = 2,4-pentane N,N′-bis(2,6-diisopropylphenyl)diketiminate) was synthesized from the corresponding bridging iodide complex [^MeL^iPrCr(μ-I)]₂ by ligand substitution and subsequent oxidation with silver triflate (AgOTf). ^MeL^iPr Cr^III(OTf)₂ exhibits rare trigonal bipyramidal geometry about Cr(III). Attempts to alkylate this triflate synthon with 1,4-dilithiobutane (Li(CH₂)₄Li) led to reduction, while reaction with dimethylzinc (ZnMe₂) led to a mono-alkylated product; only the reaction with methyl lithium (MeLi) was successful in generating a dialkyl.     

Polynuclear chromium(III) carboxylates. 3. Cyclic and cubane type hexachromium acetates

Heating an aqueous solution of the trinuclear ‘basic’ chromium(III) acetate led to the formation of several products which were separated by ion-exchange chromatography. Crystals of a new cyclic, hexanuclear Cr(III) compound, [Cr₆(OH)₁₀(O₂CCH₃)₆(H₂O)₄]Cl₂·13H₂O (3·Cl₂·13H₂O) were obtained upon elution of the violet complex 3 with 0.5 M NaCl and slow evaporation of the eluent. The six chromium atoms in complex 3 form an almost planar, irregular hexagon with an overall symmetry close to C_2h. By heating solid ‘basic’ chromium(III) acetate at 300 °C, followed by ion-exchange separation, a new hexanuclear complex, [Cr₆O₃(OH)(O₂CCH₃)₉(H₂O)₄]²⁺ (4) has been obtained. Complex 4 has a {Cr₆O₄} core, which consists of a {Cr₄O₄} cubane type inner core with two external chromium centers attached to μ₄-oxo(cube) ligands. A similar procedure, using ‘basic’ chromium(III) propionate led to the isolation of the dodecanuclear complex [Cr₁₂O₈(O₂CCH₂CH₃)₁₆(H₂O)₈]⁴⁺ (5) which has a {Cr₁₂O₈} core. The {Cr₆O₄} core in complex 4 can be regarded to be formed from a tetranuclear {Cr₄O₂} butterfly unit and a dinuclear {Cr₂O₂} unit. Similarly, the {Cr₁₂O₈} core in 5 can be considered to be constructed from two orthogonal {Cr₆O₄} units as in complex 4.     

Mono-η complexes of chromium(II) and chromium(0). Electron demanding substituents, structural and spectroscopic data comparisons

Using thermal and photochemical methods a series of new chromium complexes has been prepared: (ν⁶-p-C₆H₄F₂)Cr(CO)₃; (ν⁶-C₆H₅CF₃)Cr(CO)₃; [m-C₆H₄(CF₃)₂]Cr(CO)₃; (ν⁶-C₆H₅F)Cr(CO)₂H(SiCl₃); (ν⁶-C₆H₅F)Cr(CO)₂(SiCl₃)₂; (p-C₆H₄F₂)Cr(CO)₂-H(SiCl₃); (C₆H₅CF₃)Cr(CO)₂H(SiCl₃(p-C₆H₄F₂)Cr(CO)₂(SiCl₃)₂; C₆H₅CF₃)Cr(CO)₂(SiCl₃)₂; [m-C₆H₄(CF₃)₂]Cr(CO)₂-H(SiCl₃); [m-C₆H₄(CF₃)₂]Cr(CO)₂(SiCl₃)₂. Two compounds were structurally characterized by X-ray diffraction. These data combined with IR and ¹H NMR have allowed assessment of some of the electronic and steric effects. The Cr-arene bond is considerably longer in the Cr(II) derivatives than in the Cr(0) species. Also the Cr center, as might be expected, is less electron rich in the Cr(II) dicarbonyl disilyl derivatives. The ν⁶-p-C₆H₄F₂ ligands are slightly folded so that the C---F carbons are moved further away from the Cr center. Comparison of structural and electronic effects is made with a series of similar chromium compounds reported in the literature. These new (arene)Cr(II) derivatives possess more labile ν⁶-arene ligands, which promise a rich chemistry at the chromium center.     

Unprecedented quadruple Me2biim-bridged di- and tetranuclear complexes: Syntheses, structures and magnetic properties

Quadruple Me₂biim-bridged di- and tetranuclear complexes[Cu₂(H₂O)₂(Me₂biim)₄](SO₄)₂ (1) and [Cr₄(μ-Cl)(μ-Me₂biim)₈(H₂O)_1.67(OH)_0.33](ClO₄)_6.67 (2) have been prepared and characterized. The repulsion between the methyl groups forces the two imidazole rings out of coplanarity, responsible for the much weaker magnetic exchange coupling between the Cu²⁺ ions in 1.     

Reactions of benzocyclobutene chromium complexes with carbon, nitrogen and oxygen nucleophiles: nucleophilic addition and unexpected proximal ring opening reactions

Tricarbonyl(η⁶-1-oxobenzocyclobutene)chromium(0) (1) can be transformed to tricarbonyl(η⁶-1-endo-hydroxybenzocyclobutene) chromium(0) derivatives with substituents R (R=CH₃, CH=CH₂, (CH₂)₄CH=CH₂, (CH₂)₄OSi(Me)₂tBu) at Cl on the exo face of the complex. The relative configuration is proven by an X-ray crystal structure analysis of the trimethylsilyl ether 8 (C₁₆H₁₈CrO₄Si: a=8.693(1), b=9.490(1), c=11.063(1) Å, =97.51(1), β=110.32(1), γ=95.38(1)°, triclinic, space group P (No.2), R=0.037, R_w=0.052 for 4609 observed reflections. Attempts directed at an intramolecular cycloaddition of the ortho-quinodimethane complex derived from 17 by anion promoted ring opening unexpectedly resulted in the formation of 12 as the product of an opening of the proximal bond of the anellated ring located between the hydroxy group and the coordinated aromatic ring in 16. The fact that the intermolecular cycloaddition reaction for 16 is possible in the presence of a dienophile is taken as evidence for an equilibrium between the alcoholate 17 and the two ring opened products 16 and 18. The proximal ring opening of 6 is not observed when the free organic ligand 21 is used as the educt. Ketone complexes 1 and 25 undergo proximal ring opening reaction when treated with alcoholate or primary amines.     

Bond valence sums and structural studies of antimony complexes containing Sb bonded only to O ligands

New R₀ values for Sb(III)-O of 1.955(13) Å and for Sb(V)-O of 1.912(12) Å were derived from a bond valence sum, or BVS, analysis of of 123 SbO_n fragments with n = 3-7. These R₀ values can be used to calculate the oxidation state, or OS, of Sb in complexes where Sb is bonded only to O ligands. If the OS of the Sb ion is uncertain, the average R₀ value of 1.934 Å can be used to decide between the +3 or +5 OS from the observed Sb-O bond distances without any assumptions. The Sb-O distances used in deriving the R₀ values for the +3 and +5 complexes are tabulated as a function of coordination number and have a wide range of values, but the average Sb-O distance reflects the requirement that the BVS must equal the OS. To supplement the Sb-O data, 2 new antimony tartrates were synthesized, and their crystal structures were determined. A single crystal structure determination of NaSb(OH)₆, an unexpected reaction product, gave Sb-O distances that were also included in our BVS analysis.     

Synthesis, crystal structure, magnetic property and nuclease activity of a new binuclear cobalt(II) complex

One new binuclear Co(II) complex of N,N,N',N'-tetrakis(2-benzimidazolylmethyl)-2-hydroxyl-1,3-diaminopropane (HL), [Co(2)L(mu(2)-Cl)](ClO(4))(2) x 3CH(3)CN x C(2)H(5)OC(2)H(5) (1), has been synthesized and its crystal structure and magnetic properties are shown. In 1, each Co(II) atom has a distorted trigonal bipyramidal geometry with a N(3)OCl donor set. The central two Co(II) atoms are bridged by one alkoxo-O atom and one Cl atom with the Co1-Co2 separation of 3.239 A. Susceptibility data of 1 indicate strong intramolecular antiferromagnetic coupling of the high-spin Co(II) atoms. In this paper, the interaction with calf thymus DNA was investigated by UV absorption and fluorescent spectroscopy. Results show the complex binds to ct-DNA with a intercalative mode. The interaction between complex 1 and pBR322 DNA has also been investigated by submarine gel electrophoresis, noticeably, the complex exhibits effective DNA cleavage activity in the absence of any external agents.     

Reactivity studies of highly electrophilic ruthenium complexes

The 16-electron, coordinatively unsaturated, dicationic ruthenium complex [Ru(P(OH)₂(OMe))(dppe)₂][OTf]₂ (1a) brings about the heterolysis of the C-H bond in phenylacetylene to afford the phenylacetylide complex trans-[Ru(CCPh)(P(OH)₂(OMe))(dppe)₂][OTf] (2). The phenylacetylide complex undergoes hydrogenation to give a ruthenium hydride complex trans-[Ru(H)(P(OH)₂(OMe))(dppe)₂][OTf] (3) and phenylacetylene via the addition of H₂ across the Ru-C bond. The 16-electron complex also reacts with HSiCl₃ quite vigorously to yield a chloride complex trans-[Ru(Cl)(P(OH)₂(OMe))(dppe)₂][OTf] (4). On the other hand, the other coordinatively unsaturated ruthenium complex [Ru(P(OH)₃)(dppe)₂][OTf]₂ (1b) reacts with a base N-benzylideneaniline to afford a phosphonate complex [Ru(P(O)(OH)₂)(dppe)₂][OTf] (5) via the abstraction of one of the protons of the P(OH)₃ ligand by the base. The phenylacetylide, chloride, and the phosphonate complexes have been structurally characterized. The phosphonate complex reacts with H₂ to afford the corresponding dihydrogen complex trans-[Ru(η²-H₂)(P(O)(OH)₂)(dppe)₂][OTf] (5-H₂). The intact nature of the H-H bond in this species was established using variable temperature ¹H spin-lattice relaxation time measurements and the observation of a significant J(H,D) coupling in the HD isotopomer trans-[Ru(η²-HD)(P(O)(OH)₂)(dppe)₂][OTf] (5-HD).     

Isolation of a novel chromium(III) binding protein from bovine liver tissue after chromium(VI) exposure

In the ongoing investigation into the biological importance and toxicity issues surrounding the bioinorganic chemistry of chromium, the accepted literature procedure for the isolation of the biological form of chromium, low molecular weight chromium binding protein (LMWCr) or chromodulin, was investigated for its specificity. When chromium(VI) is added to bovine liver homogenate, results presented here indicate at least four chromium(III) binding peptides and proteins are produced and that the process is non-specific for the isolation of LMWCr. A novel trivalent chromium containing protein (1) has been isolated to purity and initial characterization is reported here. Chromium(III) identification was determined by optical spectroscopy and diphenylcarbazide testing. This chromium binding protein has a molecular weight of 15.6kDa, which was determined from both gel-electrophoresis and mass spectrometry. The protein is comprised primarily of Asx, Glx, His, Gly/Thr, Ala, and Lys in a 1.00:2.51:0.37:2.09:0.39:1.17 ratio and is anionic at pH 7.4. In addition, the protein binds approximately 2.5 chromium(III) ions per molecule.     

Syntheses, crystal structures, and bond valence sum analyses of lanthanide complexes with a planar pentadentate ligand

The syntheses and X-ray crystal structures of the Eu, Gd, Dy, Ho, and Er nitrate complexes of the pentadentate ligand 2,6-diacetylpyridine bis acetic acid hydrazone, or H₂dapaah, are reported. The complexes can be divided into 3 groups depending on the number of water molecules per metal ion. The Ln · 4H₂O complexes with Eu, Gd and Dy are isomorphous, with the Ln ion being 10 coordinate. The Ln · 6H₂O group includes Ho and Er, where the cation is 9 coordinate. The final complex Gd · 5H₂O is 10 coordinate like the Eu, Gd and Dy complexes, but the additional water molecule has stabilized an ordered crystal. The bond valence sum method has been used to analyze the bonding in the complexes and has suggested that bond valence equalization in three dimensions may be an important concept.     

Crystal form III of beta-cyclodextrin-ethanol inclusion complex: layer-type structure with dimeric motif

The crystal form III of the beta-cyclodextrin (beta-CD)-ethanol inclusion complex [2(C(6)H(10)O(5))(7).1.5C(2)H(5)OH.19H(2)O] belongs to the triclinic space group P1 with unit cell constants: a=15.430(1), b=15.455(1), c=17.996(1)A, alpha=99.30(1) degrees , beta=113.18(1) degrees , gamma=103.04(1) degrees . beta-CD forms dimers comprising two identical monomers that adopt a 'round' conformation stabilized by intramolecular, interglucose O-3(n)cdots, three dots, centeredO-2(n+1) hydrogen bonds. The two beta-CD monomers of form III are isostructural to that of form I in the monoclinic space group P2(1) [Steiner, T.; Mason, S. A.; Saenger, W. J. Am. Chem. Soc.1991, 113, 5676-5687], but exhibit a striking difference from that of form II in the monoclinic space group C2 [Aree, T.; Chaichit, N. Carbohydr. Res.2003, 338, 1581-1589]. The small guest EtOH molecule orients differently in the large beta-CD cavity. In form III, two disordered EtOH molecules are embedded in the beta-CD-dimer cavity. A half occupied EtOH molecule (#1) is located above the O-4 plane of beta-CD #1, whereas another doubly disordered EtOH molecule (#2, #3) is situated at about the middle of the beta-CD-dimer cavity. The three EtOH sites are maintained in positions by making van der Waals contacts to each other and to the surrounding water sites and beta-CD O-3-H group. The EtOH molecules disordered (occupancy 0.3) above the beta-CD O-4 plane in form I and fully occupied beneath the O-4 plane in form II are strongly held in positions by hydrogen bonding with the surrounding water site and beta-CD O-6-H, O-3-H groups. Occurrence of the beta-CD dimer as a structural motif of channel-type packing (form II) and layer-type packing (form III) is attributed to the higher tendency for self aggregation under the moderate acidic conditions. At weak acidic conditions, beta-CD prefers a herringbone mode (form I).     

Iron(III), chromium(III) and cobalt(II) complexes with squarate: Synthesis, crystal structure and magnetic properties

The preparation and variable temperature-magnetic investigation of three squarate-containing complexes of formula [Fe₂(OH)₂(C₄O₄)₂(H₂O)₄]·2H₂O (1) [Cr₂(OH)₂(C₄O₄)₂(H₂O)₄]·2H₂O (2) and [Co(C₄O₄)(H₂O)₄]_n (3) [H₂C₄O₄ = 3.4-dihydroxycyclobutene-1,2-dione (squaric acid)] together with the crystal structures of 1 and 3 are reported. Complex 1 contains discrete centrosymmetric [Fe₂(OH)₂(C₄O₄)₂(H₂O)₄] diiron(II) units where the iron pairs are joined by a di-μ-hydroxo bridge and two squarate ligands acting as bridging groups through adjacent oxygen atoms. Two coordinated water molecules in cis position complete the octahedral environment at each iron atom in 1. The iron-iron distance with the dinuclear unit is 3.0722(6) Å and the angle at the hydroxo bridge is 99.99(7)°, values which compare well with the corresponding ones in the isostructural compound 2 (2.998 Å and 99.47°) whose structure was reported previously. The crystal structure of 3 contains neutral chains of squarato-O¹,O³-bridged cobalt(II) ions where four coordinated water molecules complete the six-coordination at each cobalt atom. The cobalt-cobalt separation across the squarate bridge is 8.0595(4) Å. A relatively important intramolecular antiferromagnetic coupling occurs in 1 whereas it is very weak in 2, the exchange pathway being the same [J = −14.4 (1) and −0.07 cm⁻¹ (2), the spin Hamiltonian being defined as ]. A weak intrachain antiferromagnetic interaction between the high-spin cobalt(II) ions occurs in 3 (J = −0.30 cm⁻¹). The magnitude and nature of these magnetic interactions are discussed in the light of their respective structures and they are compared with those reported for related systems.     

Syntheses and characterization of novel binuclear chromium (III) complexes of 1,4,8,11-tetraazacyclotetradecane (cyclam)

The syntheses and characterization of novel binuclear chromium (III) complexes of 1,4,8,11-tetraazacyclotetradecane (cyclam) are described. The complex [(cyclam)Cr(OH)]₂Cl₄ · 7H₂O (1) crystallizes in the monoclinic space group C2/c with four binuclear formula units in a cell of dimensions a = 17.403 (2), b = 16.803 (3), c = 12.708 (2) Å, and β = 100.83 (1)°. The cation in 1 consists of di-μ-hydroxodichromium (III) units. The bridging OH groups lie on a twofold axis, which relates one end of the dimer to the other and gives rise to a rigorously planar Cr₂O₂ bridging unit. The Cr?Cr separation is 3.122 (1) Å and the average bridging Cr-O-Cr angle is 104.6 (4)°. The complex [(cyclam)Cr(SO₄)]₂ (ClO₄) · H₂O (5) crystallizes in the monoclinic space group P2₁/c with two binuclear formula units in a cell of dimensions a = 9.516 (2), b = 13.263 (3), c = 14.870 (3) Å, and β = 104.08 (3)°. This cation consists of bis-μ-sulfato-di-chromium (III) units, in which the two chromium centers are bridged by two bridging sulfate groups leading to an eight-membered {Cr-O-S-O}₂ bridging framework. Both dimers exhibit antiferromagnetic interactions, with J = 27.7 cm⁻¹ for complex 1 and J = 4.7 cm⁻¹ for complex 5. The EPR spectrum of the complex 1 has been simulated, demonstrating that the spectrum almost entirely originates from the quintet state, while a few lines can be attributed as triplet and septet transitions.     

Synthesis, X-ray crystal structure, DFT- and TDDFT-based spectroscopic property investigations on a mixed-ligand chromium(III) complex, bis[2-(2-hydroxyphenyl)benzimidazolato]-(1,10-phenanthroline)chromium(III) isophthalate

A mixed-ligand Cr(III) complex with 2-(2-hydroxyphenyl)benzimidazole, 1,10-phenanthroline and isophthalic acid, [Cr(pbm)₂(phen)]X_0.5 (1X_0.5) (Hpbm = 2-(2-hydroxyphenyl)benzimidazole; phen = 1,10-phenanthroline; H₂X = isophthalic acid) has been prepared by heating in aqueous solution and characterized, and the geometric structure and spectroscopic properties, investigated experimentally and theoretically by using the density functional theory level (DFT) and the time-dependent density functional theory level (TDDFT). The theoretical-experimental agreement is satisfactory. Further theoretical analyses of electronic structure and molecular orbitals have demonstrated that the low-lying absorption bands in UV-Vis spectrum are mainly π → π∗ ligand-to-ligand charge transfer transition (LLCT) and or π → (d_z²-d_x²-y²-d_yz) ligand-to-metal charge transfer transition (LMCT) in nature.     

Co-crystallization between a thymine and a metal complex connected by triple hydrogen bonds

The synthesis and crystal structure of co-crystal between bis(dithiobiureto)platinum(II) ([Pt(dtb)₂]) with thymine is reported. The crystalline structure of [Pt(dtb)₂](thymine)₂ shows two-dimensional arrays created by hydrogen-bonding interactions. One mononuclear complex and two thymine molecules form a building unit connected by triple hydrogen bond employing ADA-DAD arrangements (A, hydrogen bond acceptor; D, hydrogen bond donor). The building unit is linked to adjacent units via additional hydrogen bonds to form planar sheet.     

An oxamato bridged trinuclear copper(II) complex: Synthesis, crystal structure, reactivity, DNA binding study and magnetic properties

A linear tri-nuclear oxamato bridged copper(II) complex [Cu₃(pba)(dpa)₂(H₂O)(ClO₄)](ClO₄)·H₂O (1) (pbaH₄ = 1,3-propanediylbis(oxamic acid), dpa = 2,2′-dipyridylamine) was isolated from the reaction mixture of Na₂[Cu(pba)]·3H₂O, copper perchlorate hexahydrate and dipyridylamine in methanol. On reaction with dpa or DMF in basic medium (KOH) at ambient temperature complex 1 changed to dinuclear oxalate bridged copper(II) derivatives, [Cu₂(μ-C₂O₄)(dpa)₄](ClO₄)₂ (2) and [Cu₂(μ-C₂O₄)(dpa)₂(DMF)₂](ClO₄)₂ (3), respectively. The complexes 1, 2 and 3 have been characterized by physicochemical and spectroscopic tools, and also by the X-ray single crystal analysis. The hydrolysis of 1 in basic medium and thermo-gravimetric analysis has been studied. Absorption and emission spectral studies showed that complex 1 interacts with calf thymus-DNA (CT-DNA) with a binding constant (K_b) of 4.01 × 10⁴ M⁻¹ and linear Stern-Volmer quenching constant (K_sv) of 6.9 × 10⁴. A strong anti-ferromagnetic interaction with a coupling constant J_CuCu of 320.0 ± 0.3 cm⁻¹ was observed from the study of magnetic behavior of complex 1 in the temperature range of 2-300 K. Electrochemical equivalency of three copper(II) ions in 1 was identified by getting only one quasi reversible cyclic voltammogram.     

Reactions of seven coordinate complexes. Synthesis, structure, and copper complex of the novel ligand 3-methyltriazolo(1,5-a)6-acetylsemicarbazonepyridine

The reaction of aquachloro(2,6-diacetylpyridinedisemicarbazone)copper(II) with hydrazine hydrate gave the copper complex of 3-methyltriazolo(1,5-a)6-acetylsemicarbazonepyridine. The free ligand was isolated from the copper complex. The X-ray structures of both the copper complex and the free ligand are reported. The copper complex and the free ligand both crystallize in the triclinic space group with 2 molecules per cell. The Cu complex has cell dimensions of a=8.8574(4), b=10.1764(5), c=10.4434(5) Å, α=71.956(1), β=64.913(1), and γ=81.597(1)°. The Cu ion is in a square pyramidal arrangement, with the Cu, the ligand, and a Cl in the plane and a disordered Cl and H₂O in the apical position. The ligand has cell dimensions of a=7.2696(7), b=8.0516(7), c=9.9326(9) Å, α=110.534(2), β=96.730(2), and γ=100.089(2)°. The ligand is planar with a conformation determined by an internal N-H?H hydrogen bond. The role of the Cu ion in the formation of the triazolopyridine is discussed.     

Synthesis, crystal structure and electroluminescent properties of a Schiff base zinc complex

A new complex of zinc with a Schiff base, zinc(N,N′-bis(salicylidene)-3, 6-dioxa-1, 8-diaminooctane monohydrate) (ZnBSO · H₂O), was synthesized and characterized by means of elemental analyses, IR spectra and DTA-TG. Its structure was determined by X-ray single crystal analysis. It was demonstrated that the zinc atom is coordinated by the two oxygen atoms in phenolate and two nitrogen atoms in imine of the ligand in a slightly distorted tetrahedral geometry, while the two oxygen atoms from the oxa-alkyl chain are not coordinated to Zn(II) atom. The energy levels of the HOMO, LUMO and the electrochemical band gap were determined by cyclic voltammeter. The electroluminescent devices with the complex as the emitter showed bright blue emission with a peak at 450 nm, which is same as the fluorescence of the complex in both solution and solid states.     

Crystal structure of Ce(IV)/dipicolinate complex as catalyst for DNA hydrolysis

The structures of Ce⁴⁺ complexes that are active for DNA hydrolysis were determined for the first time by X-ray crystallography. The crystals were prepared from a 1:2 mixture of Ce(NH₄)₂(NO₃)₆ and dipicolinic acid (2,6-pyridinedicarboxylic acid). Depending on the recrystallization conditions, three types of crystals were obtained. Some of the Ce⁴⁺ ions in these complexes have enough coordinated water molecules that can directly and indirectly participate in the catalysis. The distances between the Ce⁴⁺ and the dipicolinate ligand are considerably shorter than those in the corresponding La³⁺ and Ce³⁺ complexes. On the other hand, the distances between the Ce⁴⁺ and its coordinated water are similar to those for the La³⁺ and Ce³⁺ complexes. In a proposed mechanism of DNA hydrolysis, the scissile phosphodiester linkage is notably activated by coordination to Ce⁴⁺ and attacked by the Ce⁴⁺-bound hydroxide. The process is further assisted by acid catalysis of Ce⁴⁺-bound water. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.