Electrochemical oxidation of methanol using alcohol-soluble Ru/Pt and Ru/Pd catalysts

The heterobimetallic Ru/Pt and Ru/Pd complexes [η⁵-C₅H₄CH₂CH₂N(CH₃)₂ · HI]Ru(PPh₃)(μ-I)(μ-dppm)PtCl₂ (7), [η⁵-C₅H₄CH₂CH₂N(CH₃)₂ · HI]Ru(PPh₃)(μ-I)(μ-dppm)PtI₂ (8), [η⁵-C₅H₄CH₂CH₂N(CH₃)₂ · HI]Ru(PPh₃)(μ-I)(μ-dppm)PdCl₂ (9), and [η⁵-C₅H₄CH₂CH₂N(CH₃)₂ · HI]Ru(PPh₃)(μ-I)(μ-dppm)PdI₂ (10) were prepared by the reaction of [η⁵-C₅H₄CH₂CH₂N(CH₃)₂ · HI]Ru(PPh₃)I(κ¹-dppm) (6) with Pt(COD)Cl₂, Pt(COD)I₂, and Pd(COD)Cl₂, respectively. Electronic interaction between the two metals is significant for the iodide-bridged compounds 7-10, as evidenced by the shifts of their redox potentials in comparison to the mononuclear complexes. The electrochemical oxidation of methanol was carried out with heterobimetallic complexes 7-10 and leads to the formation of dimethoxymethane (DMM) and methyl formate (MF) as the major oxidation products. The chloride complexes 7 and 9 are the most active catalysts, as evidenced by their TON and current efficiencies. Addition of water at the beginning of the electrolysis results in increased formation of the more oxidized product MF along with higher current efficiencies and TON.     

Electrodes modified with nitrofluorenone derivatives as a basis for new biosensors

We report about the electrocatalytic properties of electrodes modified by adsorption of nitro-fluorenone derivatives. The stable, adherent monolayer of these catalyst precursors can be transformed electrochemically into the corresponding hydroxylamine compounds (R-NO₂+4e+4H⁺R-NHOH+H₂O). The completely reversible two electron oxidation of the hydroxylamine leads to the nitroso compounds (R-NHOHR-NO+2e+2H⁺) that exhibit high catalytic activity in the electrooxidation of NADH at low overpotentials (−30 mV vs. Ag/AgCl) and therefore constitute a new family of efficient redox mediators for biosensor applications. A significant increase in catalytic activity (up to 500%) is observed after addition of calcium ions to the electrolyte. This is explained by a specific and bridging complexation between the coenzyme's phosphate groups and a carboxyl group present in the catalyst molecule. The interaction favours the contact between NADH and the surface confined catalyst, leading to a higher electron transfer efficiency. This interaction can be used in an approach of molecular level design for controlled monolayer deposition of catalyst, Ca²⁺, NAD⁺ and enzyme. A very simple and inexpensive modification scheme, essentially based on electrostatic attraction, leads to electrodes that can be employed as reagentless biosensors for the electrochemical detection of common and commercially interesting analytes like glucose.     

Electrochemical reduction of cytochromes P450 using electrodes containing immobilized substrates

A new approach for the electrochemical reduction of cytochromes P450 (P450, CYPs) with electrodes chemically modified with CYP appropriate substrates (“reverse” electrodes) has been proposed. The method is based on the analysis of cyclic voltammograms, square wave voltammograms, amperograms and determination of such electrochemical characteristics as catalytic current and redox potential. The differences of maximal current and potentials in square wave voltammograms and catalytic current in amperometric measurements are more sensitive and reliable. The planar mode of screen-printed electrodes permits to use 20–60 μl of electrolyte volume. We have investigated P450 2B4-benzphetamine or P450scc-cholesterol enzyme-substrate pairs. Electrochemical parameters of electrodes with nonspecific P450 substrate were differed from the electrodes with appropriate substrates.     

A possible mechanism for the increased oxidation of choline after chronic ethanol ingestion

An attempt has been made to determine the location of the site at which the metabolism of ethanol interacts with that of choline to produce an increase in the oxidation of choline. The first enzyme in the oxidation pathway for choline, choline dehydrogenase, was assayed using a newly developed spectro-photometric assay and freshly isolated intact rat liver mitochondria. No changes were observed in either the ‘apparent’ V or the ‘apparent’ K_m values of choline dehydrogenase for choline after ethanol ingestion. However, when the choline oxidase system was assayed, a 28% decrease in ‘apparent’ K_m for choline and a 53% increase in ‘apparent’ V was observed. The effects of ATP on choline oxidase were studied further, and a 29.4% decrease was observed in mitochondrial ATP levels from freshly isolated mitochondria from the ethanoltreated rats. In vitro aging of mitochondria further decreased the level of ATP, and the rate of decrease was considerably faster during the first hour in the mitochondria from the ethanol-treated animals. The decreases in ATP from both control and experimental mitochondria were accompanied by increases in choline oxidase activity. The initial decrease in ATP was correlated with an increase in mitochondrial ATPase activity which may be related to an increase in mitochondrial Mg²⁺. Because chronic ethanol ingestion has resulted in decreased oxidation rates of succinate and β-hydroxybutyrate while at the same time increasing the oxidation rates of choline, the studies reported here suggest that the effect of chronic ethanol ingestion is primarily on a step that is unique to choline and which probably exists prior to the electron transport chain.     

Electrochemiluminescence of an electrocatalytic action of etimicin on Tris(2,2′‐bipyridyl)ruthenium(II) immobilized in Nafion modified carbon paste electrode

A sensitive electrochemiluminescence (ECL) detection of etimicin at Tris(2,2′‐bipyridyl)ruthenium(II) [Ru(bpy)₃²⁺]–Nafion modified carbon paste electrodes was developed. The immobilized Ru(bpy)₃²⁺ shows good electrochemical and photochemical activities. Electrochemical and electrochemiluminescence characterizations of the modified carbon electrodes were made by means of cyclic voltammetry and electrochemical impendence spectroscopy. The modified electrode showed an electrocatalytic response to the oxidation of etimicin, producing a sensitized ECL signal. The ECL sensor showed a linear response to etimicin in the range of 8.0–160.0 ng mL^?1 with a detection limit of 6.7 ng mL^?1. This method for etimicin determination possessed good sensitivity and reproducibility with a coefficient of variation of 5.1% (n = 7) at 100 ng mL^?1. The ECL sensor showed good selectivity and long‐term stability. Its surface could be renewed quickly and reproducibly by a simple polish step. Copyright © 2009 John Wiley & Sons, Ltd.     

Electrochemical assay for the determination of nitric oxide metabolites using copper(II) chlorophyllin modified screen printed electrodes

This work presents a novel electrochemical assay for the collective measurement of nitric oxide (NO) and its metabolites nitrite (NO₂⁻) and nitrate (NO₃⁻) in volume miniaturized sample at low cost using copper(II) chlorophyllin (CuCP) modified sensor electrode. Zinc oxide (ZnO) incorporated screen printed carbon electrode (SPCE) was used as a host matrix for the immobilization of CuCP. The morphological changes of the ZnO and CuCP modified electrodes were investigated using scanning electron microscopy. The electrochemical characterization of CuCP–ZnO–SPCE exhibited the characteristic quasi-reversible redox peaks at the potential +0.06 V versus Ag/AgCl. This biosensor electrode showed a wide linear range of response over NO concentrations from 200 nM to 500 μM with a detection limit of 100 nM and sensitivity of 85.4 nA μM⁻¹. Furthermore, NO₂⁻ measurement showed linearity of 100 nM to 1 mM with a detection limit of 100 nM for NO₂⁻ and sensitivity of 96.4 nA μM⁻¹. Then, the concentration of NO₃⁻ was measured after its enzymatic conversion into NO₂⁻. Using this assay, the concentrations of NO, NO₂⁻, and NO₃⁻ present in human plasma samples before and after beetroot supplement were estimated using suitable membrane coated CuCP–ZnO–SPCE and validated with the standard Griess method.     

Electrocatalytic properties of polypyrrole in amperometric electrodes

The electrocatalytic oxidation of NADH, ascorbate, urate, xanthine and H₂O₂ at different polypyrrole electrodes has been investigated. The conducting polymer was grown on platinum, glassy carbon, or graphite electrodes and modified by means of enclosed redox-active anions or other redox-active compounds covalently bound to either the N- or the β-position of the pyrrole. Copolymers of pyrrole and N-substituted pyrrole derivatives of chloranil or 2,3-dicholoro-1,4-naphthoquinone showed outstanding electrocatalytic properties for the oxidation of NADH. The application of these electrodes in amperometric steady-state measurements or flow-injection systems in combination with dehydrogenase reactions has been possible.     

Hormonal control of ornithine decarboxylase in isolated liver cells and the effect of ethanol oxidation

The regulation of ornithine decarboxylase activity was studied in freshly isolated rat hepatocytes incubated in a chemically defined medium for 5 h. Glucagon, dibutyryl cyclic AMP, insulin and dexamethasone produced dramatic increases in ornithine decarboxylase activity, 6–100-times the basal activity. Actinomycin D inhibited completely the stimulatory action of these substances. With glucagon, dibutyryl cyclic AMP and insulin, the rise in ornithine decarboxylase activity was rapid but transient, peaking at 200 min and then declining rapidly. By contrast, the response to dexamethasone was gradual and sustained in the 5 h incubation. The transient nature of the response to glucagon was unaltered by repeated additions of optimally effective doses of glucagon suggesting the development of ‘refractoriness’ to the actions of this hormone. Ethanol oxidation inhibited by 50% the stimulation of ornithine decarboxylase by glucagon and dexamethasone and this effect was blocked by 4-methylpyrazole, an inhibitor of alcohol dehydrogenase. Acetate (2.5–20 mM), the metabolic product of hepatic ethanol oxidation, was also effective. The data indicate that glucagon, insulin and glucocorticoids are all effective in stimulating the activity of ornithine decarboxylase in isolated hepatocytes but they differ in their duration and time of peak of action. Additionally, the inhibitory effect of ethanol on the hormonal stimulation of ornithine decarboxylase is dependent on its oxidation and may be mediated by acetate.     

Electrochemical properties of cytochroms P450 using nanostructured electrodes: direct electron transfer and electro catalysis

The present study demonstrates direct electron transfer between cytochromes P450 2B4 (CYP2B4), P450 1A2 (CYP1A2), sterol 14alpha-demethylase (CYP51b1) on the one hand and screen-printed graphite electrodes, modified with gold nanoparticles and didodecyldimethylammonium bromide (DDAB) on the other. Electro detection of heme proteins was possible when 2-200 pmol P450/electrode were adsorbed on the surface of nanostructured electrochemical interfaces. Electron transfer, direct electrochemical reduction and interaction with P450 substrates (oxygen, benzphetamine, and lanosterol) and with P450 inhibitor (ketoconazole) were analyzed using cyclic voltammetry (CV), square wave voltammetry (SWV) differential pulse voltammetry (DPV), and amperometry.     

Electrochemical sensing of dihydrogen phosphate and adenosine-5′-triphosphate anions by self-assembled monolayers of (ferrocenylmethyl)trialkylammonium cations on gold electrodes

The effective electrochemical sensing of dihydrogen phosphate and adenosine-5′-triphosphate anions could be achieved in organic electrolytes using self-assembled monolayers of a (ferrocenylmethyl)trialkylammonium cation. The electrochemical response of these modified electrodes was found to be similar to that of the receptor in homogeneous solution. This observation showed that the electrochemical recognition properties of the redox active cationic receptor were fully retained after immobilization on the electrode surface. The recognition abilities of this redox assembly are based on strong ion pairing effects, further reinforced upon oxidation of the ferrocene centres to ferrocenium. The complexation events could be detected and amperometrically quantified through the emergence of new differential pulse voltammetric peaks corresponding to the electroactivity of the (ferrocenylmethyl)alkylammonium-anion complexes.     

Counter electrodes for DSC: Application of functional materials as catalysts

Counter electrodes (CEs) of dye-sensitized solar cells (DSCs) can be prepared with different materials and methods. This review covers recent research on CEs using platinum, graphite, activated carbon, carbon black, single-wall carbon nanotubes, poly(3,4-ethylenedioxythiophene) (PEDOT), polypyrrole, and polyaniline as catalysts for reduction of triiodide. Moreover, for the ultimate in low-cost counter electrodes, we have prepared a carbon-black-loaded stainless steel electrode for use as a novel CE. This counter electrode exhibits good photovoltaic performance; the efficiency reaches 9.15% (16.3 mA cm⁻²J_sc, 785 mV V_oc, and 71.4% fill factor) with SUS-316 stainless steel, equivalent to the performance with an FTO-glass substrate.     

Microbead-based electrochemical immunoassay with interdigitated array electrodes

The objective of this study was to develop a sensitive and miniaturized immunoassay by coupling a microbead-based immunoassay with an interdigitated array (IDA) electrode. An IDA electrode amplifies the signal by recycling an electrochemically redox-reversible molecule. The microfabricated platinum electrodes had 25 pairs of electrodes with 1.6-microm gaps and 2.4-microm widths. An enzyme-labeled sandwich immunoassay on paramagnetic microbeads with mouse IgG as the analyte and beta-galactosidase as the enzyme label was used as the model system. beta-Galactosidase converted p-aminophenyl beta-D-galactopyranoside to p-aminophenol (PAP). This enzyme reaction was measured continuously by positioning the microbeads near the electrode surface with a magnet. Electrochemical recycling occurred with PAP oxidation to p-quinone imine (PQI) at +290 mV followed by PQI reduction to PAP at -300 mV vs Ag/AgCl. Dual-electrode detection amplified the signal fourfold compared to single-electrode detection, and the recycling efficiency reached 87%. A calibration curve of PAP concentration vs anodic current was linear between 10(-4) and 10(-6)M. A signal from 1000 beads in a 20-microL drop was detectable and the immunoassay was complete within 10 min with a detection limit of 3.5x10(-15)mol mouse IgG.     

Electrochemical properties of hydrogenase on glass carbon electrodes modified with carbon nanotubes

Hydrogenase (H₂ ase) purified from phototropic bacteriumThiocapsa roseopersicina was coassembled with carbon nanotubes (CNTs) on glass carbon electrodes. Both oxidized CNTs and Nafion-CNT composites were used to modify the electrodes. The pure H₂ are formed dot-like domains, while the oxidized CNT-H₂ ase and Nafion-CNT-H₂ ase composites formed wire-like and large closely packed aggregates, respectively. The reductive potentials for the [4Fe-4S]^2+/1+ clusters of H₂ase were at about −500, −650, and −700 mV (vs Ag/AgCl) for the electrodes modified with pure H₂ase, Nafion-SWNT-H₂ase, and Nafion-MWNT-H₂ase composites, respectively. Potential step chronocoulometry measurements indicated a larger charge-transfer diffusion coefficient between the H₂ase and electrodes when the CNTs were co-assembled with H₂ase, suggesting that the CNTs can not only act as a supporting layer to immobilize enzymes, but also act as a highly conductive wire throughout the films.     

Effect of silybin dihemisuccinate on the ethanol metabolizing systems of the rat liver

Silybin dihemisuccinate produces a decrease in the ethanol metabolic rate of rats. This effect is ascribed to an inhibition of the microsomal ethanol oxidizing system (MEOS). Alcohol dehydrogenase activity, catalase activity and NADPH cytochrome c reductase activity are not affected by the flavonoid. It is proposed that the inhibition of MEOS by silybin dihemisuccinate is related to its antioxidant properties, acting as a scavenger of the free radicals involved in ethanol metabolism by this enzymatic system. This observation may have therapeutical implications because microsomal lipid peroxidation induced by hydroxyl free radicals has been related to the etiology of hepatic alcoholic disease.     

Urea potentiometric biosensor based on modified electrodes with urease immobilized on polyethylenimine films

The development of a new electrochemical sensor consisting in a glass-sealed metal microelectrode coated by a polyethylenimine film is described. The use of polymers as the entrapping matrix for enzymes fulfils all the requirements expected for these materials without damaging the biological material. Since enzyme immobilization plays a fundamental role in the performance characteristics of enzymatic biosensors, we have tested four different protocols for enzyme immobilization to determine the most reliable one. Thus the characteristics of the potentiometric biosensors assembled were studied and compared and it appeared that the immobilization method leading to the most efficient biosensors was the one consisting in a physical adsorption followed by reticulation with dilute aqueous glutaraldehyde solutions. Indeed, the glutaraldehyde immobilized urease sensor provides many advantages, compared to the other types of sensors, since this type of urea biosensor exhibits short response times (15–30 s), sigmoidal responses for the urea concentration working range from 1×10^−2.5 to 1×10^−1.5 M and a lifetime of 4 weeks.     

Increased microsomal oxidation of alcohols after pyrazole treatment and its similarities to the induction by ethanol consumption

Microsomes isolated from rats treated for 3 days with 200 mg/kg body wt. per day of pyrazole, a potent inhibitor of alcohol dehydrogenase, catalyzed the oxidation of ethanol and 2-butanol at rates 2–3-fold higher than saline controls. The increase eas blocked by carbon monoxide, and was not associated with an increase in the oxidation of aminopyrine or in the content of cytochrome P-450, suggesting the possibility of an induction of an alcohol-preferring cytochrome P-450 by pyrazole. Microsomes from the pyrazole-treated rats displayed a stereochemical preference for the oxidation of the (+)-2-butanol isomer over the (-)-2-butanol isomer, which was blocked by carbon monoxide, and also displayed a type-2 binding spectrum with dimethylsulfoxide or 2-butanol. No such spectrum was found with the saline controls. These properties are similar to those which are observed with microsomes from chronic ethanol-fed rats. These similarities suggest the possibility that pyrazole treatment may induce a cytochrome P-450 isozyme with properties similar to the ethanol-inducible cytochrome P-450.     

Electrochemical behavior of caffeic acid at single-walled carbon nanotube:graphite-based electrode

The performance of a single-walled carbon nanotube:graphite-based electrode, prepared by mixing single-walled carbon nanotubes (SWCNTs) and graphite powder, is described. The resulting electrode shows an excellent behavior for the redox of caffeic acid (CA), an important biological molecule. Due to the existing resemblance between electrochemical and biological reactions, it can be assumed that the oxidation mechanisms on the electrode and in the body share similar principles. SWCNT:graphite-based electrode presents a significant decrease in the overvoltage for the CA oxidation as well as a dramatic improvement in the reversibility of the CA redox behavior in comparison with the graphite-based and glassy carbon (GC) electrodes.     

Etherification of biodiesel-derived glycerol with ethanol for fuel formulation over sulfonic modified catalysts

The present study is focused on the etherification of biodiesel-derived glycerol with anhydrous ethanol over arenesulfonic acid-functionalized mesostructured silicas to produce ethyl ethers of glycerol that can be used as gasoline or diesel fuel biocomponents. Within the studied range, the best conditions to maximize glycerol conversion and yield towards ethyl-glycerols are: T = 200 °C, ethanol/glycerol molar ratio = 15/1, and catalyst loading = 19 wt%. Under these reaction conditions, 74% glycerol conversion and 42% yield to ethyl ethers have been achieved after 4 h of reaction but with a significant presence of glycerol by-products. In contrast, lower reaction temperatures (T = 160 °C) and moderate catalyst loading (14 wt%) in presence of a high ethanol concentration (ethanol/glycerol molar ratio = 15/1) are necessary to avoid the formation of glycerol by-products and maximize ethyl-glycerols selectivity. Interestingly, a close catalytic performance to that achieved using high purity glycerol has been obtained with low-grade water-containing glycerol.     

Electrochemical activation of electrodes for amperometric detection of nitric oxide

An open question in the literature of nitric oxide detection was investigated: does electrochemical activation account for the enhanced properties of certain presumed chemically-modified electrodes? Uniform electrodes of graphite, iridium, palladium, platinum, and ruthenium were exposed to potential cycling and then tested for amperometric response to nitric oxide to identify principles that govern electrochemical activation of nitric oxide electrodes. These electrodes were compared to similar electrodes that were not cycled. Only cycled graphite and ruthenium showed significantly increased responses. Graphite demonstrated enhanced performance after exposure to cycling potentials at which oxygen, CO₂, and soluble carbonates form, suggesting that erosion of the electrode enhanced its response by increasing the surface area accessible to nitric oxide. This may explain the performance of carbon fibers cycled to the same potentials in solutions containing metalloporphyrins. The response of ruthenium was enhanced after cycling to less extreme potentials at which soluble species do not form and at which a metallic conductive oxide, RuO₂, could lay down a stable, adherent layer on the electrode surface. Cycled ruthenium also exhibited a much greater increase in capacitance after cycling, consistent with the formation of a conductive surface layer.