Synthesis, X-ray structures, electrochemical properties and cytotoxic effects of Co(II) complexes

1-Benzothiazol-2-yl-3,5-dimethyl-1H-pyrazole (1a) and 1-benzothiazol-2-yl-5-(2-hydroxyphenyl)-3-methyl-1H-pyrazole-4-carboxylic acid methyl ester (1b) were reacted with the hexahydrates of cobalt(II) chloride, cobalt(II) nitrate and cobalt(II) perchlorate to give the corresponding complexes 2a-4a and 2b-5b, respectively. Obtained compounds differ in coordination spheres of central atoms. The complex 2a includes a fivefold coordinated cobalt(II) ion, whereas 3a shows a distorted octahedral configuration around the cobalt(II) ion. All complexes were characterised by FTIR spectroscopy, MS and elemental analysis. The X-ray structures of 2a, 3a and 5b complexes were also solved. The cytotoxic properties of the ligand 1a and both series of Co(II) complexes were examined on human leukemia NALM-6 and HL-60 cells and melanoma WM-115 cells. The ligands, were found to have very low cytotoxicity. Complex 3b exhibited the highest cytotoxic activity with IC₅₀ values in the range of 6.9-17.1 μM for three examined cell lines.     

Structure-dependent spectroscopic and redox properties of copper(I) complexes with bidentate iminopyridine ligands

A series of iminopyridine ligands; cyclopropylpyridin-2-ylmethyleneamine (A), cyclopentylpyridin-2-ylmethyleneamine (B), cyclohexylpyridin-2-ylmethyleneamine (C), and cycloheptylpyridin-2-ylmethyleneamine, (D) and their copper(I) complexes, [Cu(L)₂]⁺ (1a-1d) and [Cu(L)(PPh₃)₂]⁺ (2a-2d) have been synthesized and characterized by CHN analyses, ¹H NMR and IR and UV-Vis spectroscopy. Structures of 1a, 1b, 1c and 2a were determined by X-ray crystallography. The coordination polyhedron about the Cu^I center in the complexes is best described as a distorted tetrahedron. The dihedral angles between the least-squares planes of the chelate ligands show considerable variation from 86.1° in 1a to 68.3° in 1b, indicating the importance of packing forces in the crystalline environment. The UV-Vis spectra of the complexes are characterized by first metal to ligand charge transfer bands increasing in wavelength with increasing size of the ring substituents in the ligands, except for the cyclopropyl compounds (1a and 2a), in good agreement with the variation of the dihedral angles between the ligand planes. Cyclic voltammetry of the complexes indicates a quasireversible redox behavior for the complexes. The bulkier ligands (PPh₃) inhibit the geometric distortion within the oxidized form and the redox potentials of complexes 2a-2d are shifted to more positive values, therefore.     

Synthesis and structural characterization of trans-[Mo2(H2DMepyF)2(CH3CN)4](BF4)6 (HDMepyF=N,N-di(6-methyl-2-pyridyl)formamidine)

Reaction of Mo₂(O₂CCH₃)₂(DMepyF)₂ (HDMepyF=N,N^′-di(6-methyl-2-pyridyl)formamidine) with HBF₄ in CH₂Cl₂/CH₃CN afforded the complex trans-[Mo₂(H₂DMepyF)₂(CH₃CN)₄](BF₄)₆ (1), which crystallized in two forms, trans-[Mo₂(H₂DMepyF)₂(CH₃CN)₄](ax-CH₃CN)₂(BF ₄)₆ · 2CH₃CN (1a), and trans- [Mo₂(H₂DMepyF)₂(CH₃CN)₄](ax-BF₄) ₂(BF₄)₄ · 2CH₃CN (1b). The molecular structures of complexes (1) consist of two quadruply bonded molybdenum atoms, which are spanned by two trans-bridging formamidinate ligands and coordinated by four trans-CH₃CN. Each H₂DMepyF⁺ ligand adopts an s-cis,s-cis- conformation. The difference between 1a and 1b is that complex 1a contains two CH₃CN molecules as axial ligands, while 1b contains two BF₄⁻ anions as axial ligands. Complex 1 is the first dimolybdenum complex containing a pair of trans bridging ligands and two pairs of trans-CH₃CN ligands.     

Structure, dynamics and catalytic activity of palladium(II) complexes with imidazole ligands

Several palladium complexes of the type [Pd(im)₂Cl₂], [Pd(im)₃Cl]Cl, and [Pd(im)₄]Cl₂ (im = imidazole 1, 1-methylimidazole 2, 1,2-dimethylimidazole 3, 1-butylimidazole 4, 4a, 1-phenylimidazole 6, 1-phenylimidazoline 7, and 1-methylimidazoline 8) were prepared and structurally characterized. The square planar structure of two new complexes with the composition [Pd(im)₄]Cl₂ (2b, 4b) was confirmed by X-ray analysis. In solution, exchange of imidazole ligands leading to heteroleptic products was evidenced by ESI-MS studies. Two bis-ligated complexes, bearing 1-methylimidazole (2a) and 1-propoxymethylimidazole (5) ligands, were obtained in the reaction of palladium with imidazoles formed by deprotection of one nitrogen atom in the respective imidazolium halides. Catalytic Suzuki-Miyaura reactions were carried out using the obtained palladium complexes in isopropanol-water solution. High yields of the cross-coupling products were obtained at 40 and 60 °C when 2-bromotoluene, 4-bromotoluene, and 4-bromoanizole were used as substrates.     

Dopamine release and molecular modeling study of some coumarin derivatives

4-aryl-2-amino-6-(4-hydroxy-2-oxo-2H-chromen-3-yl)-pyridin-3-carbonitrile (1), 4-aryl-2-oxo-6-(4-hydroxy-2-oxo-2H-chromen-3-yl)-pyridin-3-carbonitriles (2a-2c), 3-(6-aryl-1,2,5,6- tetrahydro-2-thioxopyrimidin-4-yl)-4-hydroxy-2H-chromen-2-one (3a, 3b) and pyrazol-3-yl-4-hydroxycoumarin derivatives (4a-4c, 5, 6a, 6b, 7a, 7b, and 8a-8c) were prepared in order to measure their % change dopamine release in comparison to amphetamine as reference, using PC-12 cells in different concentrations. In addition, the molecular modeling study of the compounds into 3BHH receptor was also demonstrated. The calculated inhibition constant (k_i) implemented in the AutoDock program revealed identical correlation with the experimental results to that obtained binding free energy (ΔG_b) as both parameters revealed reasonable correlation coefficients (R²) being 0.51 involving 10 compounds; (1, 2b, 2c, 3a, 3b, 4a, 4b, 6a, and 8c).     

Expanding the scope of ‘Click’ derived 1,2,3-triazole ligands: New palladium and platinum complexes

Using the ‘Click Protocol’ the new ligands 1-(cyclohexyl)-4-(2-pyridyl)-1,2,3-triazole (1), 1-(2-trifluoromethyl phenyl)-4-(2-pyridyl)-1,2,3-triazole (2), 1-(4-hexyl phenyl)-4-(2-pyridyl)-1,2,3-triazole (3), 1-(2-mercaptomethyl phenyl)-4-(2-pyridyl)-1,2,3-triazole (4) and 1-(4-N,N-dimethylamino phenyl)-4-(2-pyridyl)-1,2,3-triazole (5) were prepared by reacting 2-ethynylpyridine with the corresponding azides. In the next step the ligands were reacted with suitable palladium and platinum precursors to yield the cis-dichloro-palladium complexes 1a-4a and platinum complexes 1b-4b. Investigation of the molecular structure of the free ligands 1 and 5 reveals the formation of infinite chains in the 3D structure which are governed by hydrogen bonds between the triazole units. Likewise the 3D structure of 1a shows infinite chains which are held together by multiple remarkably short C-H?Cl-Pd contacts. Electrochemical investigation of the free ligands by cyclic voltammetry showed irreversible reduction processes at highly negative potential. Upon metal complexation huge anodic shifts of the reduction potential were observed. To further characterize the electronic properties of all the compounds UV-Vis spectra were also analyzed.     

Influence of the phosphine arrangement on the reactivity of palladium(II) and platinum(II) polyphosphine complexes with copper(I) chloride

The distorted square-planar complexes [Pd(PNHP)Cl]Cl (1) (PNHP = bis[2-(diphenylphosphino)ethyl]amine), [M(P₃)Cl]Cl [P₃ = bis[2-(diphenylphosphino)ethyl]phenylphosphine; M = Pd (2), Pt (3)] and [Pt(NP₃)Cl]Cl (5) (NP₃ = tris[2-(diphenylphosphino)ethyl]amine), coexisting in the later case with a square-pyramidal arrangement, react with one equivalent of CuCl to give the mononuclear heteroionic systems [M(L)Cl](CuCl₂) [L = PNHP, M = Pd (1a); L = P₃, M = Pd (2a), Pt (3a); L = NP₃, M = Pt (5a)]. The crystal structure of 3a confirms that Pt(II) retains the distorted square-planar geometry of 3 in the cation with P₃ acting as tridentate chelating ligand, the central P atom being trans to one chloride. The counter anion is a nearly linear dichlorocuprate(I) ion. However, the five-coordinate complexes [Pd(NP₃)Cl]Cl (4), [M(PP₃)Cl]Cl (M = Pd (6), Pt (7); PP₃ = tris[2-(diphenylphosphino)ethyl] phosphine) containing three fused five-membered chelate rings undergo a ring-opening by interaction with one (4, 6, 7) and two (6, 7) equivalents of CuCl with formation of neutral MCu(L)Cl₃ [L = NP₃, M = Pd (4a); L = PP₃, M = Pd (6a), Pt (7a)] and ionic [MCu(PP₃)Cl₂](CuCl₂) [M = Pd (6b), Pt (7b)] compounds, respectively. The heteronuclear systems were shown by ³¹P NMR to have structures where the phosphines are acting as tridentate chelating ligands to M(II) and monodentate bridging to Cu(I). Further additions of CuCl to the neutral species 6a and 7a in a 1:1 ratio resulted in the achievement of the ionic complexes 6b and 7b with ions as counter anions. It was demonstrated that the formation of heterobimetallic or just mononuclear mixed salt complexes was clearly influenced by the polyphosphine arrangement with the tripodal ligands giving the former compounds. However, complexes [M(NP₃)Cl]Cl constitute one exception and the type of reaction undergone versus CuCl is a function of the d⁸ metal centre.     

Speciation, stability constants and structures of complexes of copper(II), nickel(II), silver(I) and mercury(II) with PAMAM dendrimer and related tetraamide ligands

The acid-base properties and Cu(II), Ni(II), Ag(I) and Hg(II) binding abilities of PAMAM dendrimer, L, and of the simple model compounds, the tetraamides of EDTA and PDTA, L¹, were studied in solution by pH-metric methods and by ¹H NMR and UV-Vis spectroscopy. PAMAM is hexabasic and six pK_a values have been determined and assigned. PAMAM forms five identifiable complexes with copper(II), [CuLH₄]⁶⁺, [CuLH₂]⁴⁺, [CuLH]³⁺, [CuL]²⁺ and [CuLH_-1]⁺ in the pH range 2-11 and three with nickel(II), [NiLH]³⁺, [NiL]²⁺ and [NiLH_-1]⁺ in the pH range 7-11. The complex [CuLH₄]⁶⁺, which contains two tertiary nitrogen and three amide oxygen atoms coordinated to the metal ion, is less stable than the analogous EDTA and PDTA tetraamide complexes [CuL¹]²⁺, which contain two tertiary nitrogen and four amide oxygen atoms, due to ring size and charge effects. With increasing pH, [CuLH₄]⁶⁺ undergoes deprotonation of two coordinated amide groups to give [CuLH₂]⁴⁺ with a concomitant change from O-amide to N-amidate coordination. Surprisingly and in contrast to the tetraamide complexes [CuL¹]²⁺, these two deprotonation steps could not be separated. As expected the nickel(II) complexes are less stable than their copper(II) analogues. The tetra-N-methylamides of EDTA, L¹(b), and PDTA form mononuclear and binuclear complexes with Hg(II). In the case of L¹(b) these have stoichiometries HgL¹(b)Cl₂, [HgL¹(b)H₋₂Cl₂]²⁻, [Hg₂L¹(b)Cl₂]²⁺, Hg₂L¹(b)H₋₂Cl₂ and [Hg₂L¹(b)H₋₅Cl₂]³⁻. Based on ¹H NMR and pH-metric data the proposed structure for HgL¹(b)Cl₂, the main tetraamide ligand containing species in the pH range <3-6.5, contains L¹(b) coordinated to the metal ion through the two tertiary nitrogens and two amide oxygens while the structure of [HgL¹(b)H₋₂Cl₂]²⁻, the main tetraamide ligand species at pH 7.5-9.0, contains the ligand similarly coordinated but through two amidate nitrogen atoms instead of amide oxygens. The proposed structure of [Hg₂L¹(b)Cl₂]²⁺, a minor species at pH 3-6.5, also based on ¹H NMR and pH-metric data, contains each Hg(II) coordinated to a tertiary amino nitrogen, two amide oxygens and a chloride ligand while that of [Hg₂L¹(b)H₋₅Cl₂]³⁻, contains each Hg(II) coordinated to a tertiary amino nitrogen, two amidate nitrogens, a chloride and a hydroxo ligand in the case of one of the Hg(II) ions. The parent EDTA and PDTA amides only form mononuclear complexes. PAMAM also forms dinuclear as well as mononuclear complexes with mercury(II) and silver(I). In the pH range 3-11 six complexes with Hg(II) i.e. [HgLH₄Cl₂]⁴⁺, [HgLH₃Cl₂]³⁺, [Hg₂LCl₂]²⁺, [Hg₂LH₋₁Cl₂]⁺, [HgLH₋₁Cl₂]⁻ and [HgLH₋₂Cl₂]²⁻ were identified and only two with Ag(I), [AgLH₃]⁴⁺ and [Ag₂L]²⁺. Based on stoichiometries, stability constant comparisons and ¹H NMR data, structures are proposed for these species. Hence [HgLH₄Cl₂]⁴⁺ is proposed to have a similar structure to [CuLH₄]⁶⁺ while [Hg₂LCl₂]²⁺has a similar structure to [Hg₂L¹(b)H₋₅Cl₂]³⁻.     

8-Quinolinolato complexes of ruthenium(II) and (III)

Reduction of RuQ₃ (1a, Q = 8-quinolinolato) with Zn/Hg in the presence of various π-acceptor ligands in ethanol affords RuQ₂L₂ (L₂ = (dimethylsulfoxide)₂ (2); (4-picoline)₂ (3); N,N′-dimethyl-1,4-diazabuta-1,3-diene, dab (4); cyclooctadiene, COD (5); norborna-2,5-diene, nbd (6)). Compound 6 is isolated as an equimolar mixture of cis,trans (6a) and trans,cis (6b) isomers, which can be separated by column chromatography. DFT calculations have been performed on 6a and 6b. Oxidation of 3 and 6b affords the corresponding ruthenium(III) species 7 and 8, respectively. The structures of 2, 3, 4 and 6 have been determined by X-ray crystallography.     

2-(1-(Dimethylamino)ethyl)phenylpalladium(II) complexes 5-functionalized with fluorous silyl tails

New fluorous-organometallics based on the chiral ligand α-methyl-N,N-dimethylbenzylamine (TMBA) were prepared by treatment of fluorous silyl bromide reagents with in situ 4-lithiated TMBA to give fluorous N,N-dimethyl(α-methyl-4-trialkylsilylbenzyl)amine ligands 1a-1c that vary in the number of fluorous tails attached to the Si atom. Ligands 1a-1c were successfully cyclo-palladated by treatment with Pd(OAc)₂/LiCl in methanol to furnish the corresponding chloride-bridged dimeric arylpalladium(II) complexes 2a-2c in good yields. The latter derivatives could be converted into monomeric Lewis-base adducts by complexation with pyridine (3a-3c), or triphenylphosphine (4a-4c). The crystal structure of triphenylphosphine complex 4a has been elucidated. To probe their fluorophilicity, the partition coefficient of each of the derivatives in the fluorous biphasic solvent (FBS) system perfluoromethylcyclohexane/n-octane has been determined.     

Synthesis, solid-state characterization and antimicrobial activities of three different polymorphs of a copper(II) complex with 4-isopropyltropolone (hinokitiol)

There exist at least three different polymorphs in the copper(II) complex [Cu(hino)₂] with a hinokitiol ligand (Hhino; 4-isopropyltropolone¹). In addition to deep-green plate crystals 1a and deep-green rod crystals 1b, whose crystal structures have been recently reported, novel green needle crystals 1c of [Cu(hino)₂] were found, the crystal structure of which was here determined by single-crystal X-ray analysis. Since only one crystal structure has been reported for the copper(II) complex [Cu(trop)₂] with a tropolone ligand (Htrop), the polymorphism found in the crystals of [Cu(hino)₂] would be due to the presence of the isopropyl group on the tropolone ring. The synthetic conditions giving the three polymorphs in good yields were found and the crystals were characterized with elemental analysis, FT-IR, TG/DTA and X-ray powder diffraction (XPD) measurements, as well as solution molecular weight measurements for 1a. The solid-state magnetic behaviors or the temperature-dependent magnetic susceptibilities were measured with Superconductivity Quantum Interference Devices (SQUID): 1a showed a weak ferromagnetic interaction, 1b showed a paramagnetic nature with S=1/2, while 1c showed a weak antiferromagnetic interaction. The antimicrobial activities for selected bacteria, yeasts and molds were also measured in the water-suspension system: 1a and 1b showed no activity, while 1c showed modest activities, and these activities were compared with those of the neutral Hino and the anionic hino⁻ ligands.     

Solid-gas carbonylation of aryloxide rhodium(I) complexes: stepwise reaction forming Vaska-type complexes

Aryloxide rhodium(I) complexes Rh(OAr)(PPh₃)₃ (1a: Ar=C₆Cl₅, 1b: Ar=C₆F₅, 1c: Ar=C₆H₄-NO₂-4) react with CO in toluene solutions to produce Vaska-type complexes trans-Rh(OAr)(CO)(PPh₃)₂ (2a: Ar=C₆Cl₅, 2b: Ar=C₆F₅, 2c: Ar=C₆H₄-NO₂-4). Carbonylation of a similar complex with PMe₃ ligands, Rh(OC₆H₄-NO₂-4)(PMe₃)₃ (3c), also forms trans-Rh(OC₆H₄-NO₂-4)(CO)(PMe₃)₂ (4c). Molecular structures of the complexes are determined by X-ray crystallography and NMR spectroscopy. Complex 1a reacts with CO in the absence of solvent to produce a mixture of 2a and complex A, the latter of which shows the IR and ¹³C{¹H} signals due to the carbonyl ligand at different positions from those of 2a. Addition of Et₂O to the above mixture turns it into analytically pure 2a. Carbonylation of 1b and 1c under the solvent-free conditions produces complexes B and C as the respective products of the solid-gas reaction. Recrystallization of B and C turns them into 2b and 2c, respectively. Complex 3c also reacts with CO in the solid state to form a mixture of 4c and complex D, although the latter complex is converted slowly into 4c even in the solid state.     

Functional mimics of catechol oxidase by mononuclear copper complexes of sterically demanding [NNO] ligands

Several mononuclear copper complexes 1(a-b) and 2(a-b) supported over sterically demanding [NNO] ligands namely, N-(aryl)-2-[(pyridin-2-ylmethyl)amino]acetamide [aryl = 2,6-diethylphenyl (1) and mesityl (2)], exhibit catecholase-like activity in performing the aerial oxidation of 3,5-di-t-butylcatehol (3,5-DTBC) to 3,5-di-t-butyl-catequinone (3,5-DTBQ) under ambient conditions. The 1(a-b) and 2(a-b) complexes were directly synthesized from the reaction of the respective ligands 1-2 with CuX₂·nH₂O (X = Cl, NO₃, n = 2, 3) in 55-85% yield. Mechanistic insights on the catalytic cycle as obtained by density functional theory studies for a representative complex 1a suggest that an intramolecular hydrogen transfer, from a catechol-OH moiety to a copper bound superoxo moiety, form the rate-determining step of the oxidation process, displaying an activation barrier of 18.3 kcal/mol (ΔG^‡) [6.9 kcal/mol in Δ(PE + ZPE)^‡ scale].     

Synthesis and structure of dichloropalladium(II) complexes of heteroleptic N,S- and N,Se-donor ligands based on the 2-organochalcogenomethylpyridine motif, and Mizoroki-Heck catalysis mediated by complexes of N,S-donor ligands

Ligands containing the 2-organochalcogenomethylpyridine motif with substituents in the 4- or 6-position of the pyridyl ring, R⁴,R⁶-pyCH₂ER¹ [R⁴ = R⁶ = H, ER¹ = SMe (1), SeMe (2), SPh (6), SePh (7); R⁴ = Me, R⁶ = H, ER¹ = SMe (3), SPh (8), SePh (9); R⁴ = H, R⁶ = Me, ER¹ = SMe (4), SPh (10), SePh (11); R⁴ = H, R⁶ = Ph, ER¹ = SMe (5), SPh (12), SePh (13)] are obtained on the reaction of R⁴,R⁶-pyMe with LiBuⁿ followed by R¹EER¹. On reaction with PdCl₂(NCMe)₂, the ligands with a 6-phenyl substituent form cyclopalladated species PdCl{6-(o-C₆H₄)pyCH₂ER¹-C,N,E} (5a, 12a, 13a) with the structure of 13a (ER¹ = SePh) confirmed by X-ray crystallography; other ligands form complexes of stoichiometry PdCl₂(R⁴,R⁶-pyCH₂ER¹). Complexes with R⁶ = H are monomeric with N,E-bidentate configurations, confirmed by structural analysis for 3a (R⁴ = Me, ER¹ = SMe), 7a (R⁴ = H, ER¹ = SePh) and 9a (R⁴ = Me, ER¹ = SePh). Two of the 6-methyl substituted complexes examined by X-ray crystallography are oligomeric with trans-PdCl₂(N,E) motifs and bridging ligands, trimeric [PdCl₂(μ-6-MepyCH₂SPh-N,S)]₃ (10a) and dimeric [PdCl₂(μ-6-MepyCH₂SePh-N,Se)]₂ (11a). This behaviour is attributed to avoidance of the Me···Cl interaction that would occur in the cis-bidentate configuration if the pyridyl plane had the same orientation with respect to the coordination plane as observed for 3a, 7a and 9a [dihedral angles 8.0(2)-16.8(2)°]. When examined as precatalysts for the Mizoroki-Heck reaction of n-butyl acrylate with aryl halides in N,N-dimethylacetamide at 120 °C, the complexes exhibit the anticipated trends in yield (ArI > ArBr > ArCl, higher yield for electron withdrawing substituents in 4-RC₆H₄Br and 4-RC₆H₄Cl). The most active precatalysts are PdCl₂(R⁴-pyCH₂SMe-N,S) (R = H (1a), Me (3a)); complexes of the selenium containing ligands exhibit very low activity. For closely related ligands, the changes SMe to SPh, 6-H to 6-Me, and 6-H to 6-Ph lead to lower activity, consistent with involvement of both the pyridyl and chalcogen donors in reactions involving aryl bromides. The precatalyst PdCl₂(pyCH₂SMe-N,S) (1a) exhibits higher activity for the reaction of aryl chlorides in Buⁿ₄NCl at 120 °C as a solvent under non-aqueous ionic liquid (NAIL) conditions.     

Synthesis and characterisation of new N1-alkyl-3,5-dipyridylpyrazole derived ligands. Study of their reactivity with Pd(II) and Pt(II)

Two new pyrazole-derived ligands, 1-ethyl-3,5-bis(2-pyridyl)pyrazole (L¹) and 1-octyl-3,5-bis(2-pyridyl)pyrazole (L²), both containing alkyl groups at position 1 were prepared by reaction between 3,5-bis(2-pyridyl) pyrazole and the appropriate bromoalkane in toluene using sodium ethoxide as base.The reaction between L¹, L² and [MCl₂(CH₃CN)₂] (M = Pd(II), Pt(II)) resulted in the formation complexes of formula [MCl₂(L)] (M = Pd(II), L = L¹ (1); M = Pd(II), L = L² (2); M = Pt(II), L = L¹ (3); M = Pt(II), L = L² (4)). These complexes were characterised by elemental analyses, conductivity measurements, infrared, ¹H, ¹³C{¹H} NMR and HMQC spectroscopies. The X-ray structure of the complex [PtCl₂(L²)] (4) was determined. In this complex, Npyridine and Npyrazole donor atoms coordinate the ligand to the metal, which complete its coordination with two chloro ligands in a cis disposition.     

New bis(macrocyclic) dinickel(II) complexes obtained by oxidation of bis(5,7-dimethyl-1,4,8,11-tetraazacyclotetradeca-4,7-dien-6-yl)dinickel(II) perchlorate

New bis(macrocyclic) dinickel(II) complexes with bis(Me₂[14]-4,7-dien-6-ylidene), 2a and 2b, were synthesized by oxidation of a dinickel(II) complex with an unsaturated bis(macrocyclic) ligand containing four CN bonds, bis(Me₂[14]-4,7-dien-6-yl) (1). Complex 2a was found to undergo intramolecular cyclization between the methyl group of one macrocycle and the carbon atom of the CN group of the other macrocycle to produce a bis(macrocyclic) dinickel(II) complex bridged by a fivemembered ring (3). The structures of 2b and 3 were determined by X-ray crystallography. The nonsymmetrical bis(macrocyclic) structure of the dinickel(II) complex 3 was reflected in its cyclic voltammogram and ¹H and ¹³C NMR spectra. The catalytic capabilities of these bis(macrocyclic) nickel(II) complexes in the reductive debromination of 1-bromo-4-tert-butylbenzene were also investigated.     

Five-coordinate zinc(II) complexes with optically active Schiff bases derived from (1R,2R)-(−)cyclohexanediamine: X-ray structure and CP MAS NMR characterization of [cyclohexylenebis(5-chlorosalicylideneiminato)zinc(II)pyridine] and [cyclohexylenebis(5-bromosalicylideneiminato)zinc(II)pyridine]

Schiff bases obtained from (1R,2R)-(−)-cyclohexanediamine and 5-chloro- (1) or 5-bromosalicylaldehyde (2) are used as ligands for Zn(II) resulting in [(1R,2R)-cyclohexylenebis(5-chlorosalicylideneiminato)]zinc(II) (1a) and (1R,2R)-[cyclohexylenebis-(5-bromosalicylideneiminato)]zinc(II) (2a). In the presence of pyridine, 1a and 2a turned out into (1R,2R)-[cyclohexylenebis(5-chlorosalicylideneiminato)pyridine]zinc(II) (1b) and (1R,2R)-[cyclohexylenebis(5-bromosalicylideneiminato)pyridine]zinc(II) (2b). Coordination sphere of Zn(II) atoms in both pyridine adducts is a slightly distorted square pyramid, with N₂O₂ chromophore units and axially bonded pyridine as it is evident from single crystal X-ray analyzes of 1b and 2b. The asymmetric unit of 1b and 2b contains two molecules of complexes. The observed distances of Zn-O in both molecules indicate the rigidity of the tetradentate ligand as a main factor influencing the geometry of coordination sphere. Obtained complexes were characterized by ¹H NMR in solution and ¹³C CP MAS NMR. NOE differential experiments revealed significant steric interactions between C(6)-H in the phenyl ring, cyclohexyl C(1)-H and imine hydrogen. Significant coordination shifts of carbons in the closest proximity to the coordination center were noted as well.     

1,3-Dipolar cycloaddition to the FeSC fragment 20. Preparation and properties of carbonyliron complexes of di-thiooxamide. Reactivity of the mononuclear (di-thiooxamide)Fe(CO)3 towards dimethyl acetylenedicarboxylate

Reaction of Fe₂(CO)₉ at room temperature in THF with the di-thiooxamides (L), SC{N(R,R′)}C{(R,R′)N}S [R=Me, R′-R′=(CH₂)₂ (a); R=H, R′=ⁱPr (b); R=H, R′=iPr (c), R=H, R′=benzyl (d); R=H, R′=H (e)], results for ligands a-d initially in the formation of the mononuclear σ-S, σ-S′ chelate complexes Fe(CO)₃(L) (7a-d), which could be isolated in case of 7a and 7d. Under the reaction conditions, complexes 7a-d react further with [Fe(CO)₄] fragments to give three types of Fe₂(CO)₆(L) complexes (8a-d) in high yields, depending on the di-thiooxamide ligand used together with traces of the known complex S₂Fe₃(CO)₉ (14). The molecular structures of these complexes have been established by the single crystal X-ray diffraction determinations of 8a, 8b and 8d. In the reaction with ligand e the corresponding complex 7e was not detected and the well-known complexes 14 and S₂Fe₃(CO)₉ (15) were isolated in low yield. In situ prepared 7a reacts in a slow reaction with 1 equiv. of dimethyl acetylene dicarboxylate in a 1,3-dipolar cycloaddition reaction to give the stable initial ferra [2.2.1] bicyclic complex 10a in 60% yield. In complex 10a an additional Fe(CO)₄ fragment is coordinated to the sulfido sulfur atom of the cycloadded FeSC fragment. When a toluene solution of 10a is heated to 50 °C it loses two terminal CO ligands to give the binuclear FeFe bonded complex 11a in almost quantitative yield. The molecular structures of 10a and 11a have been confirmed by single crystal X-ray diffraction. Reaction of 7d at room temperature with 2 equiv. of dimethyl acetylene dicarboxylate results in the mononuclear complex 12d in 5% yield. The molecular structure of 12b has been established by single crystal X-ray diffraction and comprises a tetra dentate ligand with two ferra-sulpha cyclobutene, and a ferra-disulpha cyclopentene moiety. When the reaction is performed at 60 °C a low yield of 2,3,4,5-thiophene tetramethyl tertracarboxylate is obtained besides complex 12d.     

Secondary ligand-metal interactions in rhodium(III) and iridium(III) phosphoramidite complexes

The synthesis, characterization, and application in asymmetric catalytic cyclopropanation of Rh(III) and Ir(III) complexes containing (S_a,R_C,R_C)-O,O′-[1,1′-binaphthyl-2,2′-diyl]-N,N′-bis[1-phenyl-ethyl]phosphoramidite (1) are reported. The X-ray structures of the half-sandwich complexes [MCl₂(C₅Me₅)(1,κP)] (M = Rh, 2a; M = Ir, 2b) show that the metal-phosphoramidite bond is significantly shorter in the Ir(III) analog. Chloride abstraction from 2a (with CF₃SO₃SiMe₃ or with CF₃SO₃Me) and from 2b (with AgSbF₆) gives the cationic species [MCl(C₅Me₅)(1,2-η-1,κP)]⁺ (M = Rh, 3a; M = Ir, 3b), which display a secondary interaction between the metal and a dangling phenethyl group (NCH(CH₃)Ph) of the phosphoramidite ligand, as indicated by NMR spectroscopic studies. Complexes 3a and 3b slowly decompose in solution. In the case of 3b, the binuclear species [Ir₂Cl₃(C₅Me₅)₂]⁺ is slowly formed, as indicated by an X-ray study. Preliminary catalytic tests showed that 3a cyclopropanates styrene with moderate yield (35%) and diastereoselectivity (70:30 trans:cis ratio) and with 32% ee (for the trans isomer).     

Coordination polymers derived from a bis-pyridyl-bis-amide ligand: Supramolecular structural diversities and anion binding properties

Six new coordination polymers namely [{Cu(μ-L1)(CH₃COO)₂}]_∝1a, [{Cu(μ-L1)₂(CH₃COO)₂]_∝1b, [{Cu(μ-L1)₂(H₂O)₂}(NO₃)₂]_∝2, [{Cu(μ-L1)₂(H₂O)₂}(ClO₄)₂]_∝3, [{Cu(μ-L1)(H₂O)₂(μ-SO₄)}·3H₂O]_∝4a and [{Cu(μ-L1)₂SO₄}·X]_∝4b (L1 = N,N′-bis-(3-pyridyl)terephthalamide) have been synthesized. Single crystal structures of five coordination polymers namely 1a, 2-4b and the free ligand L1 are discussed in the context of the effect of conformation dependent ligating topology of the ligands, hydrogen bonding backbone, counter anions on the resultant supramolecular structures observed in these coordination polymers. It was revealed from the single crystal X-ray structure analysis that conformation dependent ligating topology of the bis-amide ligand L1, counter anion’s ligating strength dependent metal: ligand ratio, hydrogen bonding ability of the ligand as well as counter anions are responsible for the formation of 1D zigzag, 1D looped chain, 2D corrugated sheet in 1a, 2-3, 4a−4b, respectively. By following in situ coordination polymer crystallization technique, anion binding and separation studies have also been performed; nitrate anion has been separated as neat coordination polymer crystals from a complex mixture of anions.