An NMR study of some reactions of an arachno-molybdapentaborane: Formation of an unstable nido-molybdapentaborane

Photolysis of the molybdaborane [(η⁵-C₅H₅)(η⁵:η¹-C₅H₄)-arachno-2-MoB₄H₇] (1) in benzene-d₆ gives ca. 60% conversion to the compound [(η⁵-C₅H₅)(η⁵:η¹-C₅H₄)-nido-2-MoB₄H₅] (2). Compound 2 could not be isolated as a solid and is thermally unstable at 20 °C in solution with a half-life of 3-4 h. Repeated photolysis and thermolysis of 1 in the presence of BH₃ · thf gives a low yield of the known metallacarbaborane [(η⁵-C₅H₅)(η²:η³-C₃H₃)-closo-1-MoC₂B₉H₉] (3) suggesting that 3 is formed from 1 via 2. Reaction of 1 with PEt₃ gives initially [(η⁵-C₅H₅)(η⁵:η¹-C₅H₄)-arachno-2-MoHB₄H₄PEt₃] (4). Longer reaction times (>10 min, 20 °C) give in addition [(η⁵-C₅H₅)(η⁵:η¹-C₅H₄)-arachno-1-MoHB₃H₃PEt₃] (5). Both 4 and 5 are unstable in solution or the solid state decomposing to the molybdacarbaborane [(η⁵-C₅H₅)(η³:η²- C₃H₃)-nido-1-MoC₂B₃H₅] (6), [Mo(η-C₅H₅)₂H₂] and BH₃ · PEt₃. Compound 1 is deprotonated cleanly by KH in thf at the Mo-H-B bridging proton to give (7).     

Synthesis and characterisation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes [Ti(IV), Zr(IV), Hf(IV), La(III), Ce(III), Yb(III), Sn(II) and Fe(II)]

The preparation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes is described. These are of formula [M{η⁵-C₅H₄(BX)}Cl₃] [M = Ti and X = CAT (2a), CAT^t (2b) or CAT^tt (2c); X = CAT^tt and M = Zr (4a) or Hf (4b)], [M{η⁵-C₅H₄(BX)}₂Cl₂] [M = Zr, X = CAT (3a) or CAT^t (3c); or M = Hf, X = CAT (3b) or CAT^t (3d)], [M{(μ-η⁵-C₅H₃BCAT)₂ SiMe₂}Cl₂] [M = Zr (5a) or Hf (5b)], [M{η⁵-C₅H₃(BCAT)₂}Cl₃] [M = Zr (6a) or Hf (6b)], [M{η⁵-C₅H₄BCAT}₃(THF)] [M = La (7a), Ce (7b) or Yb (7c)], [Sn{η⁵-C₅ H₄(BCAT^t)}Cl](8) and [Fe{η⁵-C₅H₄(BCAT^t)}₂] (9). The abbreviations refer to BO₂C₆H₄-1,2 (BCAT) and the 4-Bu^t (BCAT^t) and the (BCAT^tt) analogues. The compounds 2a-9 have been characterised by microanalysis, multinuclear NMR and mass spectra. The single crystal X-ray structure of the lanthanum compound 7a is presented.     

C-ansa-zirconocene complexes with O/S donor ligands: Novel homoleptic six coordinate 4-mercaptophenolate complex of Zr(IV)

New C-ansa-zirconocene complexes containing methoxythiophenolate and mercaptophenolate ligands have been synthesized and characterized. The reaction of (HSC₆H₄-n-OMe) (n = 2, 3 or 4) with [Zr{(t-Bu)HC(η⁵-C₅Me₄)(η⁵-C₅H₄)}Me₂] (1) led to the formation of monosubstituted complexes [Zr{(t-Bu)HC(η⁵-C₅Me₄)(η⁵-C₅H₄)}Me(κ,S-SC₆H₄-n-OMe)] (n = 2 (2); n = 3 (3)) and the disubstituted complex [Zr{(t-Bu)HC(η⁵-C₅Me₄)(η⁵-C₅H₄)}(κ,S-SC₆H₄-4-OMe)₂] (4). The complexes [Zr{(R)HC(η⁵-C₅Me₄)(η⁵-C₅H₄)}(κ,O-OC₆H₄-4-SH)₂] (R = t-Bu (6); R = CH₂CHCH₂ (7)) and [Zr(η⁵-C₅H₄)₂(OC₆H₄-n-SH)₂] (n = 3 (9); n = 4 (10)) have been synthesized using the corresponding dimethyl zirconocene and mercaptophenol. However, the reaction of [Zr{(t-Bu)HC(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (11) with 4-mercaptophenol in the presence of NEt₃ led to the formation of the first example of a homoleptic six-coordinate mercaptophenolate complex of zirconium, namely [HNEt₃]₂[Zr(κ,O-OC₆H₄-4-SH)₆] (12). Complex 12 can be obtained in higher yield by the reaction of ZrCl₄ with six equivalents of 4-mercaptophenol and NEt_3. The reaction of 12 with [Zr(η⁵-C₅H₄)₂Cl₂] gave the unexpected disubstituted complex [Zr(η⁵-C₅H₄)₂(OC₆H₄-4-SH)₂] (10). The molecular structures of 4 and 12 have been determined by single-crystal X-ray diffraction studies.     

Reactions of the borole complex CpRh(η-C4H4BPh) with monocationic organometallic fragments

The B-phenylborole complex CpRh(η⁵-C₄H₄BPh) (1) reacts with [ML]⁺ fragments to give the arene-type cationic complexes [CpRh(μ-η⁵:η⁶-C₄H₄BPh)ML]⁺ (ML = RuCp^∗ (3), Co(C₄Me₄) (4), Rh(cod) (5), and Ir(cod) (6)). Cation 4 undergoes a reversible rearrangement into the triple-decker complex [CpRh(μ-η⁵:η⁵-C₄H₄BPh)Co(C₄Me₄)]⁺ (7) under visible light irradiation in CH₂Cl₂ solution. DFT calculations revealed greater stability of arene-type complexes over triple-decker isomers. The structure of [3]BF₄ was determined by X-ray diffraction.     

Intramolecular activation of pendant alkenyl group as a tool for modification of the zirconocene framework

The diphenyl zirconocene [(η⁵-C₅H₅){η⁵-C₅H₄CMe₂(CH₂)₂CHCH₂}ZrPh₂] (2) was readily obtained from the corresponding zirconocene dichloride 1 and two equivalents of phenyllithium. Upon thermal treatment at 80 °C, complex 2 released benzene, with concomitant activation of the pendant double bond and formation of intramolecularly α-tethered zirconaindane [(η⁵-C₅H₅){η⁵,η¹,η¹-C₅H₄CMe₂(CH₂)₂CHCH₂C₆H₄}Zr] (3). Both Zr-C σ-bonds in 3 easily undergo nucleophilic reactions with two equivalents of HCl or one equivalent of Cl₂PPh giving rise to zirconocene dichlorides with pendant phenyl group [(η⁵-C₅H₅){η⁵-C₅H₄CMe₂(CH₂)₄Ph}ZrCl₂] (4) or with 1-phenylphosphindolinyl moiety [(η⁵-C₅H₅){η⁵-C₅H₄CMe₂(CH₂)₂cyclo-CHCH₂C₆H₄P(Ph)}ZrCl₂] (5), respectively.     

Macropolyhedral boron-containing cluster chemistry: two-electron variations in intercluster bonding intimacy. Contrasting structures of 19-vertex [(η-C5Me5)HIrB18H19(PHPh2)] and [(η-C5Me5)IrB18H18(PH2Ph)]

Fused double-cluster [(η⁵-C₅Me₅)IrB₁₈H₁₈(PH₂Ph)] (8), from syn-[(η⁵-C₅Me₅)IrB₁₈H₂₀] (1) and PH₂Ph, retains the three-atoms-in-common cluster fusion intimacy of 1, in contrast to [(η⁵-C₅Me₅)HIrB₁₈H₁₉(PHPh₂)] (6), from PHPh₂ with 1, which exhibits an opening to a two atoms-in-common cluster fusion intimacy. Compound 8 forms via spontaneous dihydrogen loss from its precursor [(η⁵-C₅Me₅)HIrB₁₈H₁₉(PH₂Ph)] (7), which has two-atoms-in-common cluster-fusion intimacy and is structurally analogous to 6.     

Redox chemistry of an ethenyl complex with isolobal CbCo and CpFe fragments

Dyad (η⁴-C₄Ph₄)Co(η⁵-C₅H₄CHCHFc) (2) containing isolobal iron and cobalt metallocene fragments has been prepared and its structure and spectroelectrochemical properties examined. Both the E and Z isomers have been characterised and their X-ray structures determined. B3LYP/6-31G^∗ calculations for 2 show that the HOMO has more electron density on the Fc than on the CbCo(η⁵-C₅H₄) fragment whereas the reverse is the case for the LUMO. Both isomers undergo chemically reversible oxidations at the Fc (0.49 and 0.53 V) and CbCo redox centres (0.96 V) but the [2Z]²⁺ cation isomerises to [2E]²⁺ concomitant with the second oxidation process. A NIR band at 1290 nm for the [2E]⁺ cation is assigned to a CbCo(η⁵-C₅H₄) → Fc⁺ charge-transfer.     

Synthesis, characterization and applications in ethylene polymerization of asymmetric ansa-titanocene complexes. Molecular structure of [Ti{Me2Si(η-C5Me4)(η-C5H3iPr)}Cl2]

The ansa-titanocene complexes, [Ti{Me₂Si(η⁵-C₅Me₄)(η⁵-C₅H₃R)}Cl₂] (R = Me (5), iPr (6), tBu (7), SiMe₃ (8)), were obtained from the reaction of Li₂{Me₂Si(C₅Me₄)(C₅H₃R)} (R = Me (1), iPr (2), tBu (3), SiMe₃ (4)) with [TiCl₄(THF)₂], respectively. Compounds 5-8 have been tested as catalysts in the polymerization of ethylene and compared with the ansa-titanocene complexes [Ti{Me₂Si(η⁵-C₅H₄)₂}Cl₂] and [Ti{Me₂Si(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂]. The resulting polyethylene showed molecular weights of about 200 000 g mol⁻¹ and polydispersity values of approximately 3. In addition, the molecular structure of 6 has been determined by single crystal X-ray diffraction studies.     

Synthesis, molecular structure, substitution and C-C coupling reactions of ruthenium complexes containing (η-C9H7)Ru(PPh3) as a molecular unit

The 2-methallyl complex [(η⁵-C₉H₇)Ru(η³-2-MeC₃H₄)(PPh₃)] (3), prepared from [(η⁵-C₉H₇)Ru(PPh₃)₂Cl] (2) and 2-MeC₃H₄MgCl, reacts with HX (X = Cl, CF₃CO₂) in the presence of ethene to give the chiral-at-metal compounds [(η⁵-C₉H₇)Ru(C₂H₄)(PPh₃)X] (4, 5) in nearly quantitative yields. Treatment of 2 with AgPF₆ and ethene affords [(η⁵-C₉H₇)Ru(C₂H₄)(PPh₃)₂]PF₆ (6), which reacts with acetone to give the substitution product [(η⁵-C₉H₇)Ru(OCMe₂)(PPh₃)₂]PF₆ (7). The molecular structure of 7 has been determined crystallographically. Whereas treatment of 4 with CH(CO₂Et)N₂ yields the olefin complex [(η⁵-C₉H₇)Ru{η²-(Z)-C₂H₂(CO₂Et)₂}(PPh₃)Cl] (8), the reactions of 4 and 5 with Ph₂CN₂, PhCHN₂ and (Me₃Si)CHN₂ lead to the formation of the carbeneruthenium(II) derivatives [(η⁵-C₉H₇)Ru(CRR′)(PPh₃)Cl] (9-11) and [(η⁵-C₉H₇)Ru(CRR′)(PPh₃)(κ¹-O₂CCF₃)] (12-14), respectively. Treatment of 9 (R = R′ = Ph), 10 (R = H, R′ = Ph) and 11 (R = H, R′ = SiMe₃) with MeLi produces the hydrido(olefin) complexes [(η⁵-C₉H₇)RuH(η²-CH₂CPh₂)(PPh₃)] (15), [(η⁵-C₉H₇)RuH(η²-CH₂CHPh)(PPh₃)] (18a,b) and [(η⁵-C₉H₇)RuH(η²-CH₂CHSiMe₃)(PPh₃)] (19) via C-C coupling and β-hydride shift. The analogous reactions of 11 with PhLi gives the η³-benzyl compound [(η⁵-C₉H₇)Ru{η³-(Me₃Si)CHC₆H₅}(PPh₃)] (20). The η³-allyl complex [(η⁵-C₉H₇)Ru(η³-1-PhC₃H₄)(PPh₃)] (17) was prepared from 10 and CH₂CHMgBr by nucleophilic attack.     

Low temperature allene coupling and isomerization at triosmium clusters

Facile coupling and isomerization of allene (CH₂CCH₂) has been found on its interaction at low temperatures with [H₂Os₃(CO)₁₀] to give the di-allyl species [Os₃(μ₃-η¹:η²:η³-C₆H₈)(CO)₁₀] (1) and [Os₃(μ₃-η¹:η²:η³-C₆H₈)(CO)₉] (2) in which two allene molecules are bonded in an end-to-centre array. Cluster 2 converts either in solution or in the solid state into two different species: the colourless derivative [Os₃H(μ₃-η¹:η¹:η¹:η²-C₆H₇)(CO)₉] (3) and the metallocyclopentadiene [Os₃(μ-η¹:η¹:η²:η²-C₆H₈)(CO)₉] (4), which could be regarded as the result of 1,3-hydrogen shifts of the coupled allene at triosmium clusters.     

Dinuclear ruthenium(II) catecholato and 2,3-naphthalenediolato complexes featuring κ-diaryloxo/η-arene coordination mode

A new dinuclear ruthenium(II) catecholato complex [Cp*Ru(κ²:η⁶-μ₂-1,2-O₂C₆H₄)RuCp*] (3; Cp* = η⁵-C₅Me₅) has been prepared by the reaction of [Cp*RuCl]₄ with 2 equiv. of disodium catecholate in THF. Complex 3 has a dinuclear structure, in which one of the Cp*Ru fragments is κ²-bonded to the two oxygen atoms and the other is η⁶-bonded to the aromatic ring. Similar treatment of [Cp*RuCl]₄ with disodium 2,3-naphthalenediolate affords an analogous κ²:η⁶-bonded dinuclear complex [Cp*Ru(κ²:η⁶-μ₂-2,3-O₂C₁₀H₆)RuCp*] (4) with selective π-complexation at the oxygen-substituted naphthalene ring. The molecular structure of 4 has been determined by X-ray crystallography. The oxygen-bound ruthenium atoms in complexes 3 and 4 are coordinatively unsaturated and readily uptake 1 equiv. of carbon monoxide to give the corresponding carbonyl adducts [Cp*Ru(CO)(κ²:η⁶-μ₂-1,2-O₂C₆H₄)RuCp*] (5) and [Cp*Ru(CO)(κ²:η⁶-μ₂-2,3-O₂C₁₀H₆)RuCp*] (6), respectively.     

Synthesis of cyclopentadienyl ruthenium(II) complexes containing tethered functionalities

The reaction of [C₅H₄(CH₂)_nX]Tl (1: n = 2, X = NMe₂, OMe, CN; n = 3, X = NMe₂) with [(η⁶-C₆H₆)RuCl(μ-Cl)]₂, 2, afforded the sandwich compounds [{η⁵-C₅H₄(CH₂)_nX}Ru(η⁶-C₆H₆)]PF₆, 3, and [η⁵-C₅H₄(CH₂)_nX]₂Ru, 4. Photolytic cleavage of 3 in acetonitrile afforded the tethered products [{η⁵:κN-C₅H₄(CH₂)_nX}Ru(CH₃CN)₂]PF₆, 5.     

Homobimetallic anthracene-bridged η-cyclopentadienyl derivatives of rhodium(I) and iridium(I): large molecules or supramolecular species?

The reaction of 9,10-bis[(cyclopentadienylmethyl)thallium(I)]anthracene (2), obtained from 9,10-bis(cyclopentadienylmethyl)anthracene (1), with the chloro derivatives of rhodium(I) of formula [RhClL₂]₂ (L=η²-C₈H₁₄ or L₂=η⁴-C₈H₁₂) leads to the corresponding bimetallic complexes [L₂Rh{C₅H₄CH₂(9,10-anthrylene)CH₂C₅H₄}RhL₂] 3 (L=η²-C₈H₁₄) and 4 (L₂=η⁴-C₈H₁₂), in 22.8% and 15.0% yields, respectively. Analogously, by reacting 2 with [IrClL₂]₂ (L=η²-C₈H₁₄ or L₂=η⁴-C₈H₁₂), the corresponding bimetallic iridium(I) complexes [L₂Ir{C₅H₄CH₂(9,10-anthrylene)CH₂C₅H₄}IrL₂] 5 (L=η²-C₈H₁₄) and 6 (L₂=η⁴-C₈H₁₂) were obtained, in 24.5% and 43.0% yields, respectively. All complexes have been characterised by elemental analysis, mass spectrometry, and ¹H NMR. The structure of 4 was elucidated also by single crystal X-ray diffraction: it crystallises in the P2₁/c space group with a=19.932(11), b=6.4417(4), c=12.377(2) Å; α=90°, β=100.90(4)°, γ=90°. V=1560.5(9) ų. Z=2, D_calc=1.606 g cm⁻¹, R₁=0.0449 [I>σ(I)], wR₂=0.1121. The UV-Vis spectra (280-530 nm) of 3-6 are indicative of the existence of strong electronic interactions among the 9,10-anthrylene chromophore and the two cyclopentadienylML₂ moieties. When excited at ca. 370 nm, 1 results to be an efficient light-emitting molecule, while the fluorescence emission of the 9,10-anthrylene chromophore is almost completely quenched in complexes 3-6. The study of the electrochemical behaviour of 3-6 in strictly aprotic conditions allows a satisfactory interpretation of the observed electrode processes and gives information about the location of the redox sites along with the thermodynamic characterisation of the corresponding redox processes. These data show that the occurrence of an intramolecular charge-transfer process between the photo-excited 9,10-anthrylene group and the cyclopentadienylML₂ moiety is a possible route for the observed quenching of emission in the compounds 3-6. The one-electron oxidation of compounds 3-6 by thallium(III) trifluoroacetate leads to the formation of the corresponding cation radicals. Three of them, i.e., 3⁺, 5⁺ and 6⁺, give rise to good X-band EPR spectra that were fully interpreted by computer simulation as well as by semi-empirical calculations (PM3 level) of the spin density distribution.     

Study of the cytotoxicity and particle action in human cancer cells of titanocene-functionalized materials with potential application against tumors

Titanocene dichloride [Ti(η⁵-C₅H₅)₂Cl₂] (1), has been grafted onto dehydrated hydroxyapatite (HAP), Al₂O₃ and two mesoporous silicas MSU-2 (Michigan State University Silica type 2) and HMS (Hexagonal Mesoporous Silica), to give the novel materials HAP/[Ti(η⁵-C₅H₅)₂Cl₂] (S1) (1.01 wt.% Ti), Al₂O₃/[Ti(η⁵-C₅H₅)₂Cl₂] (S2) (2.36 wt.% Ti), HMS/[Ti(η⁵-C₅H₅)₂Cl₂] (S3) (0.75 wt.% Ti) and MSU-2/[Ti(η⁵-C₅H₅)₂Cl₂] (S4) (0.74 wt.% Ti), which have been characterized by powder X-ray diffraction, X-ray fluorescence, nitrogen gas sorption, multinuclear magic angle spinning NMR spectroscopy, IR spectroscopy, thermogravimetry analysis, UV spectroscopy, scanning electronic microscopy and transmission electronic microscopy. The cytotoxicity of the titanocene-functionalized materials toward human cancer cell lines from five different histogenic origins: 8505 C (anaplastic thyroid cancer), A253 (head and neck cancer), A549 (lung carcinoma), A2780 (ovarian cancer) and DLD-1 (colon cancer) has been determined. M₅₀ values (quantity of material needed to inhibit normal cell growth by 50%) and Ti-M₅₀ values (quantity of anchored titanium needed to inhibit normal cell growth by 50%) indicate that the activity of S1-S4 against studied human cancer cells depended on the surface type as well as on the cell line. In addition, studies on the titanocene release and the interaction of the materials S1-S4 with DNA show that the cytotoxic activity may be due to particle action, because no release of titanium complexes has been observed in physiological conditions, while electrostatic interactions of titanocene-functionalized particles with DNA have been observed.     

Syntheses and characterization of iridium and rhodium ethylene complexes containing a doubly linked cyclopentadienyl ligand

The dimerization of 6,6-dimethylfulvene with Ni(cod)₂ yields the 4,4,8,8-tetramethyl-3a,4,7a,8-tetrahydro-s-indacene isomer (1a). Heating a solution of 1a converts it to the 1,4,5,8 (1b) and 1,4,7,8 (1c) tetrahydro-s-indacene isomers. The activation energy for the isomerization is 23(1) kcal/mol. 1b and 1c can be deprotonated with n-BuLi and the reaction of the dianion with [ClIr(C₂H₄)₂]₂ gives two isomers, cis-[(η⁵-C₅H₃)(CMe₂)Ir(C₂H₄)₂]₂ (cis-2) and trans-[(η⁵-C₅H₃)(CMe₂)Ir(C₂H₄)₂]₂ (trans-2). Reaction of 1b and 1c with RhCl₃ · xH₂O in refluxing methanol yields a red-orange solid, which was consistent with the empirical formula, [(C₅H₃)(CMe₂)RhCl₂]_n (3). Reaction of 3 with C₂H₄ in a Na₂CO₃/ethanol mixture afforded cis-[(η⁵-C₅H₃)(CMe₂)Rh(C₂H₄)₂]₂ in 5% yield.     

Cytotoxic studies of substituted titanocene and ansa-titanocene anticancer drugs

A variety of substituted titanocene and ansa-titanocene complexes have been synthesized and characterized using traditional methods. The cytotoxic activity of the different titanocene complexes was tested against tumour cell lines human adenocarcinoma HeLa, human myelogenous leukemia K562, human malignant melanoma Fem-x and normal immunocompetent cells, peripheral blood mononuclear cells PBMC. Alkenyl substitution, either on the cyclopentadienyl ring or on the silicon-atom ansa-bridge of the titanocene compounds [Ti{Me₂Si(η⁵-C₅Me₄)(η⁵-C₅H₃{CMe₂CH₂CH₂CHCH₂})}Cl₂] (8), [Ti{Me(CH₂CH)Si(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (9) and [Ti(η⁵-C₅H₄{CMe₂CH₂CH₂CHCH₂})₂Cl₂] (12) showed higher cytotoxic activities (IC₅₀ values from 24 ± 3 to 151 ± 10 μM) relative to complexes bearing an additional alkenyl-substituted silyl substituent on the silicon bridge [Ti{Me{(CH₂CH)Me₂SiCH₂CH₂}Si(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (10) and [Ti{Me{(CH₂CH)₃SiCH₂CH₂}Si(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (11) which causes a dramatic decrease of the cytotoxicity (IC₅₀ values from 155 ± 9 to >200 μM). In addition, the synthesis of the analogous niobocene complex [Nb(η⁵-C₅H₄{CMe₂CH₂CH₂CH=CH₂})₂Cl₂] (13), is described. Structural studies based on DFT calculations of the most active complexes 8, 9 and 12 and the X-ray crystal structure of 13 are reported.     

Synthesis and reactivity of imido niobium complexes containing the functionalized (dichloromethylsilyl)cyclopentadienyl ligand

The niobium complex [NbCp^ClCl₄] (Cp^Clη⁵-C₅H₄(SiCl₂Me)) (1) with a functionalized (dichloromethylsilyl)cyclopentadienyl ligand was isolated by the reaction of [NbCl₅] with C₅H₄(SiCl₂Me)(SiMe₃). Complex 1 was a precursor for the imido silylamido derivative [NbCp^NCl₂(NtBu)] (Cp^Nη⁵-C₅H₄[SiClMe(NHtBu)]) (2) after addition of LiNHtBu, which subsequently gave the dichlorosilyl compound [NbCp^ClCl₂(NtBu)] (3) when reacted with SiCl₃Me. Addition of LiNHtBu to complex 2 gave the niobium amido complex [NbCp^NCl(NHtBu)(NtBu)] (4), which slowly evolved with exchange of the niobium-amido and the silicon-chloro groups to give the dichloroniobium complex [NbCp^NNCl₂(NtBu)] (Cp^NNη⁵-C₅H₄[SiMe(NHtBu)₂]) (5). Reaction of 2 with excess LiNHtBu gave the silyl-η-amido constrained geometry complexes [Nb{η⁵-C₅H₄[SiMe(NHtBu)(-η-NtBu)]}(NHtBu)(NtBu)] (6) and [Nb{η⁵-C₅H₄[SiClMe(-η-NtBu)]}(NHtBu)(NtBu)] (7), whereas addition of one equimolecular amount of LiNHtBu to 5 in C₆D₆ afforded complex [NbCp^NNCl(NHtBu)(NtBu)] (8). All of the new complexes were characterized by ¹H, ¹³C and ²⁹Si NMR spectroscopy.     

Reactivity of phenyldi(2-thienyl)phosphine towards group 7 metal carbonyls: Carbon-phosphorus bond activation

Addition of phenyldi(2-thienyl)phosphine (PPhTh₂) to [Re₂(CO)_10−n(NCMe)_n] (n = 1, 2) affords the substitution products [Re₂(CO)_10−n(PhPTh₂)_n] (1, 2) together with small amounts of fac-[ClRe(CO)₃(PPhTh₂)₂] (3) (n = 2). Reaction of [Re₂(CO)₁₀] with PPhTh₂ in refluxing xylene affords a mixture which includes 2, [Re₂(CO)₇(PPhTh₂)(μ-PPhTh)(μ-H)] (4), [Re₂(CO)₇(PPhTh₂)(μ-PPhTh)(μ-η¹,κ¹(S)-C₄H₃S)] (5) and mer-[HRe(CO)₃(PPhTh₂)₂] (6). Phosphido-bridged 4 and 5 are formed by the carbon-phosphorus bond cleavage of the coordinated PPhTh₂ ligand, the cleaved thienyl group being retained in the latter. Reaction of [Mn₂(CO)₁₀] with PPhTh₂ in refluxing toluene affords [Mn₂(CO)₉(PPhTh₂)] (7) and the carbon-phosphorus bond cleavage products [Mn₂(CO)₆(μ-PPhTh)(μ-η¹,η⁵-C₄H₃S)] (8) and [Mn₂(CO)₅(PPhTh₂)(μ-PPhTh)(μ-η¹,η⁵-C₄H₃S)] (9). Both 8 and 9 contain a bridging thienyl ligand which is bonded to one manganese atom in a η⁵-fashion.     

Coordination behavior of phosphino-phosphaferrocenes: monodentate versus bidentate coordination to divalent palladium

Two novel phosphino-phosphaferrocenes [η⁵-C₅H₄(CH₂)_nPPh₂]Fe(η⁵-PC₄H₂-2,5-Cy₂) (PP1: n=1; PP2: n=2) have been designed and prepared in order to clarify weak chelate effect in the previously reported (η⁵-C₅H₄CH₂PPh₂)Fe[η⁵-PC₄H₂-2,5-((-)-menthyl)₂] (1). ³¹P NMR studies of reactions of PP1 with PdCl₂(cod) (6) revealed that PP1 showed stronger tendency to coordinate to the Pd^II center in bidentate fashion compared to 1. On the other hand, chelate effect in PP2 was negligibly weak and a reaction of PP2 with 6 in a PP2/6 = 2/1 molar ratio gave a complex PdCl₂(PP2)₂ (10) cleanly in which PP2 coordinated to the palladium center at the PPh₂ moiety as a monodentate ligand. X-ray crystal structure studies of chelate complexes PdCl₂(PP1) (7) and PdCl₂(PP2) (9) showed that 9 had deviations from an idealized geometry in the square planar complex which could be attributed to a larger chelate ring of PP2, while PP1 in 7 constructed nearly ideal geometry for the square planar complex.From comparison of the coordination behavior between 1, PP1, and PP2, it is concluded that steric bulk of (-)-menthyl groups in 1 is the main factor of the weak chelate coordination of 1.     

Mapping the pathway of heteroborane isomerisation: Two parallel “1,2 → 1,7” isomerisations of a crowded molybdacarborane and the isolation of isomerisation intermediates

The reaction between [7,8-Ph₂-7,8-nido-C₂B₉H₉]²⁻ and [(η-C₇H₇)Mo(MeCN)₃]⁺ affords five products. Four have been isolated and shown to be structural isomers of (η-C₇H₇)MoPh₂C₂B₉H₉. Compound 1 has a pseudocloso structure. In solution it gives way to the non-icosahedral compound 2 which in turn rearranges into the “1,2 → 1,7” C-atom isomerised compound 5 having a 2,1,8-MoC₂B₉ structure. A further “1,2 → 1,7” C-atom isomerised species, compound 4, is also isolated but has a 1,2,4-MoC₂B₉ architecture. Compound 4 forms via an intermediate 3, which is too unstable to characterise. Structurally the sequence of compounds 1, 2 and 5 maps well onto the sequential diamond-square-diamond isomerisation mechanism of 1,2-closo-C₂B₁₀H₁₂ into 1,7-closo-C₂B₁₀H₁₂ proposed by Wales. An alternative pathway from the notional first product of the metallation, 1,2-Ph₂-3-(η-C₇H₇)-3,1,2-closo-MoC₂B₉H₉, is required to rationalise the intermediate compound 3 and, from it, compound 4.