Sequence Analysis of the Cryptic Plasmid pMG101 from Rhodopseudomonas palustris and Construction of Stable Cloning Vectors

A 15-kb cryptic plasmid was obtained from a natural isolate of Rhodopseudomonas palustris. The plasmid, designated pMG101, was able to replicate in R. palustris and in closely related strains of Bradyrhizobium japonicum and phototrophic Bradyrhizobium species. However, it was unable to replicate in the purple nonsulfur bacterium Rhodobacter sphaeroides and in Rhizobium species. The replication region of pMG101 was localized to a 3.0-kb SalI-XhoI fragment, and this fragment was stably maintained in R. palustris for over 100 generations in the absence of selection. The complete nucleotide sequence of this fragment revealed two open reading frames (ORFs), ORF1 and ORF2. The deduced amino acid sequence of ORF1 is similar to sequences of Par proteins, which mediate plasmid stability from certain plasmids, while ORF2 was identified as a putative rep gene, coding for an initiator of plasmid replication, based on homology with the Rep proteins of several other plasmids. The function of these sequences was studied by deletion mapping and gene disruptions of ORF1 and ORF2. pMG101-based Escherichia coli-R. palustris shuttle cloning vectors pMG103 and pMG105 were constructed and were stably maintained in R. palustris growing under nonselective conditions. The ability of plasmid pMG101 to replicate in R. palustris and its close phylogenetic relatives should enable broad application of these vectors within this group of α-proteobacteria.     

Isolation and molecular characterization of pMG160, a mobilizable cryptic plasmid from Rhodobacter blasticus

A 3.4-kb cryptic plasmid was obtained from a new isolate of Rhodobacter blasticus. This plasmid, designated pMG160, was mobilizable by the conjugative strain Escherichia coli S17.1 into Rhodobacter sphaeroides, Rhodobacter capsulatus, and Rhodopseudomonas palustris. It replicated in the latter strains but not in Rhodospirillum rubrum, Rhodocyclus gelatinosus, or Bradyrhizobium species. Plasmid pMG160 was stably maintained in R. sphaeroides for more than 100 generations in the absence of selection but showed segregational instability in R. palustris. Instability in R. palustris correlated with a decrease in plasmid copy number compared to the copy number in R. sphaeroides. The complete nucleotide sequence of plasmid pMG160 contained three open reading frames (ORFs). The deduced amino acid sequences encoded by ORF1 and ORF2 showed high degrees of homology to the MobS and MobL proteins that are involved in plasmid mobilization of certain plasmids. Based on homology with the Rep protein of several other plasmids, ORF3 encodes a putative rep gene initiator of plasmid replication. The functions of these sequences were demonstrated by deletion mapping, frameshift analysis, and analysis of point mutations. Two 6.1-kb pMG160-based E. coli-R. sphaeroides shuttle cloning vectors were constructed and designated pMG170 and pMG171. These two novel shuttle vectors were segregationally stable in R. sphaeroides growing under nonselective conditions.     

Isolation and Molecular Characterization of pMG160, a Mobilizable Cryptic Plasmid from Rhodobacter blasticus

A 3.4-kb cryptic plasmid was obtained from a new isolate of Rhodobacter blasticus. This plasmid, designated pMG160, was mobilizable by the conjugative strain Escherichia coli S17.1 into Rhodobacter sphaeroides, Rhodobacter capsulatus, and Rhodopseudomonas palustris. It replicated in the latter strains but not in Rhodospirillum rubrum, Rhodocyclus gelatinosus, or Bradyrhizobium species. Plasmid pMG160 was stably maintained in R. sphaeroides for more than 100 generations in the absence of selection but showed segregational instability in R. palustris. Instability in R. palustris correlated with a decrease in plasmid copy number compared to the copy number in R. sphaeroides. The complete nucleotide sequence of plasmid pMG160 contained three open reading frames (ORFs). The deduced amino acid sequences encoded by ORF1 and ORF2 showed high degrees of homology to the MobS and MobL proteins that are involved in plasmid mobilization of certain plasmids. Based on homology with the Rep protein of several other plasmids, ORF3 encodes a putative rep gene initiator of plasmid replication. The functions of these sequences were demonstrated by deletion mapping, frameshift analysis, and analysis of point mutations. Two 6.1-kb pMG160-based E. coli-R. sphaeroides shuttle cloning vectors were constructed and designated pMG170 and pMG171. These two novel shuttle vectors were segregationally stable in R. sphaeroides growing under nonselective conditions.     

Characterization of a region of plasmid pBL1 of Brevibacterium lactofermentum involved in replication via the rolling circle model.

The minimal region for autonomous replication of pBL1, a 4.5-kb cryptic plasmid of Brevibacterium lactofermentum ATCC 13869 that has been used to construct a variety of corynebacterium vectors, was shown to be contained on a 1.8-kb HindII-SphI DNA fragment. This region contains two open reading frames (ORFs) (ORF1 and ORF5) which are essential for pBL1 replication in B. lactofermentum. Accumulation of single-strand intermediates in some of the constructions indicates that plasmid pBL1 replicates via the rolling circle replication model; its plus strand and minus strand were identified by hybridization with two synthetic oligonucleotide probes complementary to each pBL1 strand. ORF1 seems to encode the Rep protein and showed partial homology with sequences for Rep proteins from Streptomyces plasmids which replicate via rolling circle replication such as pIJ101, pSB24, and pJV1.     

Characterization and properties of a novel plasmid vector for Bacillus thuringiensis displaying compatibility with host plasmids.

A novel plasmid vector, composed of a 1.7-kb Bacillus thuringiensis (B.t.) replicon, a multiple cloning site, and an erythromycin-resistance marker gene from Bacillus subtilis, was constructed for use in B.t. Unlike other vectors which have been reported to be acceptable for B.t., this new B.t. vector was stably maintained in the absence of Er and did not displace host plasmids, some of which carry crystal protein-encoding genes (cry genes). The compatibility of this B.t. vector with native plasmids is highly desirable when introducing new cry genes into a wild-type B.t. strain. When a cryIIIA gene of B.t. tenebrionis was cloned in this vector and introduced into B.t. kurstaki (kur) HD119, cryIIIA was highly expressed without affecting the level of expression of native cry genes. The stability of this vector and its compatibility with native B.t. plasmids were achieved by subcloning only nucleotide sequences required for the vector to replicate in B.t. The origin of replication was first cloned on a 9.6-kb Bg/II fragment from a 75-kb plasmid of B.t. kur HD73 and then localized to a 2.4-kb region within the 9.6-kb fragment. Sequencing of the 2.4-kb region revealed the presence of an open reading frame (ORF), encoding a putative 312-amino acid (aa) protein. The deduced aa sequence of the ORF showed no homology to any published aa sequences. Deletion analysis indicated that the B.t. vector required at least the ORF and up to 300 bp surrounding the ORF, in order to replicate.     

Identification and characterization of an active plasmid partition mechanism for the novel Lactococcus lactis plasmid pCI2000

The replication region of the lactococcal plasmid pCI2000 was subcloned and analyzed. The nucleotide sequence of one 5.6-kb EcoRI fragment which was capable of supporting replication when cloned on a replication probe vector revealed the presence of seven putative open reading frames (ORFs). One ORF exhibited significant homology to several replication proteins from plasmids considered to replicate via a theta mode. Deletion analysis showed that this ORF, designated repA, is indeed required for replication. The results also suggest that the origin of replication is located outside repA. Upstream and divergently transcribed from repA, an ORF that showed significant (48 to 64%) homology to a number of proteins that are required for faithful segregation of chromosomal or plasmid DNA of gram-negative bacteria was identified. Gene interruption and transcomplementation experiments showed that this ORF, designated parA, is required for stable inheritance of pCI2000 and is active in trans. This is the first example of such a partitioning mechanism for plasmids in gram-positive bacteria.     

Characterization of the cryptic plasmid pCC1 from Corynebacterium callunae and its use for vector construction

The complete nucleotide sequence of the cryptic plasmid pCC1 from Corynebacterium callunae (4109 bp) was determined. DNA sequence analysis revealed five open reading frames longer than 200 bp. One of the deduced polypeptides showed homology with the Rep proteins encoded by plasmids of the pIJ101/pJV1 family of plasmids replicating by the rolling-circle (RC) mechanism. Within this plasmid family, the Rep protein of pCC1 showed the highest degree of similarity to the Rep proteins of corynebacterial plasmids pAG3 and pBL1. These data suggest that the plasmid pCC1 replicates by the RC mechanism. The Escherichia coli/Corynebacterium glutamicum shuttle cloning vector pSCCD1, carrying the pCC1 rep gene on the 2.1-kb DNA fragment and the streptomycin/spectinomycin resistance determinant, was constructed. This vector is stably maintained in population of C. glutamicum cells grown in the absence of selection pressure and it is compatible with plasmid vectors based on corynebacterial plasmids pBL1 and pSR1.     

Replication Mechanism and Sequence Analysis of the Replicon of pAW63, a Conjugative Plasmid from Bacillus thuringiensis

A 5.8-kb fragment of the large conjugative plasmid pAW63 from Bacillus thuringiensis subsp. kurstaki HD73 containing all the information for autonomous replication was cloned and sequenced. By deletion analysis, the pAW63 replicon was reduced to a 4.1-kb fragment harboring four open reading frames (ORFs). Rep63A (513 amino acids [aa]), encoded by the largest ORF, displayed strong similarity (40% identity) to the replication proteins from plasmids pAMbeta1, pIP501, and pSM19035, indicating that the pAW63 replicon belongs to the pAMbeta1 family of gram-positive theta-replicating plasmids. This was confirmed by the facts that no single-stranded DNA replication intermediates could be detected and that replication was found to be dependent on host-gene-encoded DNA polymerase I. An 85-bp region downstream of Rep63A was also shown to have strong similarity to the origins of replication of pAMbeta1 and pIP501, and it is suggested that this region contains the bona fide pAW63 ori. The protein encoded by the second large ORF, Rep63B (308 aa), was shown to display similarity to RepB (34% identity over 281 aa) and PrgP (32% identity over 310 aa), involved in copy control of the Enterococcus faecalis plasmids pAD1 and pCF10, respectively. No significant similarity to known proteins or DNA sequences could be detected for the two smallest ORFs. However, the location, size, hydrophilicity, and orientation of ORF6 (107 codons) were analogous to those features of the putative genes repC and prgO, which encode stability functions on plasmids pAD1 and pCF10, respectively. The cloned replicon of plasmid pAW63 was stably maintained in Bacillus subtilis and B. thuringiensis and displayed incompatibility with the native pAW63. Hybridization experiments using the cloned replicon as a probe showed that pAW63 has similarity to large plasmids from other B. thuringiensis subsp. kurstaki strains and to a strain of B. thuringiensis subsp. alesti.     

Isolation of a low-molecular-weight, multicopy plasmid, pNHK101, from Thermus sp. TK10 and its use as an expression vector for T. thermophilus HB27

We isolated a small multicopy cryptic plasmid, pNHK101, from Thermus sp. TK10 for use as a replicon of a Thermus expression vector. The nucleotide sequence of pNHK101 revealed that this plasmid was 1564bp long, with a total G+C content of 66.8%, which was in agreement with that of Thermus genomic DNA. The sequence did not show any significant similarities to any other plasmids; also, the amino acid sequences of four putative open reading frames, found in the plasmid, did not show strong similarities to those in the databases, except the ORF1, which had very slight similarities to several replication proteins of plasmids from other bacteria. pNHK101 was able to replicate in Thermus thermophilus HB27 with copy number about 80, and was stably maintained at 60 degrees C, but became unstable at 70 degrees C. Based on pNHK101, we constructed a plasmid vector, pKMH052, containing the highly thermostable kanamycin resistance gene as a selective marker. The copy number of pKMH052 decreased to about one-fourth of that of pNHK101, but stability at 60 degrees C did not alter under non-selective conditions. pKMH052 was compatible with pTT8, and interestingly, the presence of pTT8 in the same cells improved the stability of pKMH052 at 70 degrees C. Cloning of the crtB gene of T. thermophilus HB27 encoding phytoene synthase into pKMH052, and introduction into T. thermophilus cells resulted in a 2.8-fold production of carotenoids, indicating the potential use of this plasmid for overexpression of genes from thermophiles and hyperthermophiles.     

Features of the replicon of plasmid pAM10.6 of Pseudomonas fluorescens

We describe features of the basic replicon of the 10.6-kb medium-copy-number plasmid pAM10.6. pAM10.6 was able to replicate in various Pseudomonas strains but was maintained in Escherichia coli only after the p15A origin of replication was inserted. Deletion analysis suggests that the pAM10.6 origin of replication is located in a 0.5-kb region that includes inverted and direct repeats upstream of the repA gene. RepA (204 aa) has a clear homology to plasmid replication proteins of some other gram-negative bacteria. The pas (plasmid addiction system) (genes encoded in the region of 480-bp) stabilizes plasmid maintenance in P. putida cells under nonselective conditions for at least 200 generations. A 3.75-kb PstI fragment of pAM10.6 joined to a Km(r) gene was shown to be a minimal plasmid unit maintained in P. putida as a monomer. Further deletions of this 3.75-kb fragment caused a drive to form stable head-to-tail dimeric plasmids in P. putida.     

Influence of different functional elements of plasmid pGT232 on maintenance of recombinant plasmids in Lactobacillus reuteri populations in vitro and in vivo

Plasmid pGT232 (5.1 kb), an indigenous plasmid of Lactobacillus reuteri 100-23, was determined, on the basis of nucleotide and deduced protein sequence data, to belong to the pC194-pUB110 family of plasmids that replicate via the rolling-circle mechanism. The minimal replicon of pGT232 was located on a 1.7-kb sequence consisting of a double-strand origin of replication and a gene encoding the replication initiation protein, repA. An erythromycin-selectable recombinant plasmid containing this minimal replicon was stably maintained (>97% erythromycin-resistant cells) without antibiotic selection in an L. reuteri population under laboratory growth conditions but was poorly maintained (<33% resistant cells) in the L. reuteri population inhabiting the murine gastrointestinal tract. Stable maintenance (>90% resistant cells) of pGT232-derived plasmids in the lactobacillus population in vivo required an additional 1.0-kb sequence which contained a putative single-strand replication origin (SSO). The SSO of pGT232 is believed to be novel and functions in an orientation-specific manner.     

Construction of a genetically engineered microorganism for CO2 fixation using a Rhodopseudomonas/Escherichia coli shuttle vector

The CO2 fixation ability of Rhodopseudomonas palustris DH was enhanced by introducing the recombinant plasmid pMG-CBBM containing the form II ribulose-1,5-bisphosphate carboxylase/oxygenase (RubisCO) gene (cbbM) isolated from Rps. palustris NO. 7. Sequencing of a 3.0-kb PstI fragment containing the cbbM gene revealed an open reading frame encoding 461 amino acids, homologous to known cbbM genes, with a ribosome binding site upstream of cbbM and a terminator downstream of cbbM, without promoter. pMG-CBBM, a Rhodopseudomonas/Escherichia coli shuttle expression plasmid, was derived from the Rhodopseudomonas/E. coli shuttle cloning vector pMG105, by inserting the promoter of the pckA gene and the cbbM gene into its multiple cloning site. Plasmid pMG-CBBM was transformed into Rps. palustris DH by electroporation, and was stably maintained when transformants were grown either photoheterotrophically or photolithoautotrophically in the absence of antibiotics. This is the first report of an expression plasmid containing a Rps. palustris-specific promoter that allows stable expression of a foreign gene in the absence of antibiotic selection.     

Complete nucleotide sequence of a cryptic plasmid, pbaw301, from the ruminai anaerobe Ruminococcus flavefaciens R13e2

Abstract The complete nucleotide sequence of a cryptic plasmid designated pBAW301, from the Gram-positive ruminai bacterium Ruminococcus flavefaciens R13e2, has been determined. This plasmid is 1768 bp in size and has an overall G+C content of 43.5%. Computer analysis of the sequence data revealed an open reading frame, ORF1 (256 amino acids), which is similar to the Rep protein of the Bacillus borstelensis plasmid pHT926. ORF1 is preceded by Shine-Dalgarno and Escherichia coli —10 and —35 like sequences. Nine smaller open reading frames showed no significant homologies to known protein sequences. Analysis of replication intermediates and the nucleotide sequence indicate that the plasmid does not replicate by a rolling-circle mode of replication similar to other plasmids from Gram-positive bacteria. Moreover, sequences typical of theta replication origins were not found in the nucleotide sequence of pBAW301. These data suggest that this plasmid either replicates by an as yet undescribed mechanism, or represents a new class of theta replicating plasmids.     

Sequence analysis and characterization of plasmids from Streptococcus thermophilus

The nucleotide sequences of eight plasmids isolated from seven Streptococcus thermophilus strains have been determined. Plasmids pSt04, pER1-1, and pJ34 are related and replicate via a rolling circle mechanism. Plasmid pJ34 encodes for a replication initiation protein (RepA) and a small polypeptide with unknown function. Plasmids pSt04 and pER1-1 carry in addition to repA genes coding for small heat shock proteins (sHsp). Expression of these proteins is induced at elevated temperatures or low pH and increases the thermo- and acid resistance. Plasmids pER1-2 and pSt22-2 show identical sequences with five putative open reading frames (ORFs). The gene products of ORF1 and ORF4 reveal some similarities to transposon encoded proteins of Bacillus subtilis and Tn916. ORF1 of plasmid pSt106 encodes a protein similar to resolvases of different Gram-positive bacteria. Integrity of ORF2 and 3, encoding a putative DNA primase and a replication protein, is essential for replication. ORF1 to 3 of plasmid pSt08, which are organized in a tricistronic operon, encode a RepA protein, an adenosine-specific methyltransferase, and a type II restriction endonuclease. Another type II restriction-modification (R/M) system is encoded on plasmid pSt0 which is highly similar to those encoded on lactococcal plasmid pHW393 and B. subtilis plasmid pXH13. Plasmid-free derivatives of strains St0 and St08 show increased phage sensitivity, indicating that in the wild-type strains the R/M systems are functionally expressed. Recombinant plasmids based on the replicons of plasmids pSt04, pJ34, pSt106, pSt08, and pSt0, are able to replicate in Lactococcus lactis and B. subtilis, respectively, whereas constructs carrying pER1-2 only replicate in S. thermophilus.     

Identification of the minimal replication region of the multicopy Streptomyces plasmid pSL1

The 1.52-kb minimal replication origin of the 3.9-kb Streptomyces plasmid pSL1 was determined using a bifunctional derivative, pMCP44, of pSL1. Plasmids with linker insertions into the pSL1 part of pMCP44 were isolated from Escherichia coli. The sites of insertion were determined by restriction enzyme analysis and the ability of the mutant plasmids to replicate in S. lividans 66 was determined. All except one of the inserts in the 1.52-kb essential region inactivated replication. A 104-bp segment from this region could function as a replication origin in the presence of a helper plasmid containing a nonoverlapping pSL1 fragment. The sequence of this 104-bp fragment shows similarities to those of known plasmid replication origins.     

Isolation and characterization of a DNA replication origin from the 1,700-kilobase-pair symbiotic megaplasmid pSym-b of Rhizobium meliloti.

A 4-kb fragment active as an autonomously replicating sequence (ARS) from the Rhizobium meliloti symbiotic megaplasmid pSym-b was isolated by selecting for sequences that allowed a normally nonreplicative pBR322 derivative to replicate in R. meliloti. The resulting Escherichia coli-R. meliloti shuttle plasmid (mini-pSym-b) containing the ARS also replicated in the closely related Agrobacterium tumefaciens, but only in strains carrying pSym-b, suggesting that a megaplasmid-encoded trans-acting factor is required. The copy number of mini-pSym-b was approximately the same as that of the resident megaplasmid, and mini-pSym-b was unstable in the absence of antibiotic selection. An 0.8-kb DNA subfragment was sufficient for replication in both R. meliloti and A. tumefaciens. The minimal ARS exhibited several sequence motifs common to other replication origins, such as an AT-rich region, three potential DnA binding sites, a potential 13-mer sequence, and several groups of short direct repeats. Hybridization experiments indicated that there may be a related ARS on the other megaplasmid, pSym-a. The pSym-b ARS was mapped near exoA, within a region nonessential for pSym-b replication. These results suggest that the R. meliloti megaplasmids share conserved replication origins and that pSym-b contains multiple replication origins. Since the mini-pSym-b shuttle vector can coexist with IncP-1 broad-host-range plasmids, it is also now possible to use two compatible plasmids for cloning and genetic manipulation in R. meliloti.     

Characterization of a novel plasmid from extremely halophilic Archaea: nucleotide sequence and function analysis

We determined the complete nucleotide sequence of the 16341 bp plasmid pHH205 of the extremely halophilic archaeon Halobacterium salinarum J7. The plasmid has a G+C content of 61.1%. A number of direct and inverted repeat sequences were found in pHH205, while no insertion sequences were found. Thirty-eight large open reading frames (ORFs) were identified in both strands, and most of them had no significant similarities to known proteins. A putative protein encoded by ORF31 showed 20-41% homology to some hypothetical proteins, which are annotated in several archaeal genome databases as predicted nucleic acid-binding proteins containing PIN domain. Sequence analysis using the GC skew procedure predicted a possible origin of replication. A 4.8 kb PvuII-SnaBI fragment containing both this region and ORF31 was shown to be able to restore replicate of pWL102, a replicon-deficient plasmid in Haloferax volcanii and in H. salinarum R1. Several methods failed to completely cure H. salinarum J7 of pHH205, suggesting that the plasmid probably played an important role in the growth and metabolism of the host. Our work describes a novel haloarchaeal replicon, which may be useful in the construction of cloning and shuttle vectors.     

Genetic analysis of a novel plasmid pZMX101 from Halorubrum saccharovorum: determination of the minimal replicon and comparison with the related haloarchaeal plasmid pSCM201

The DNA sequence of a novel haloarchaeal plasmid pZMX101 (3918 bp) from Halorubrum saccharovorum was determined and six ORFs were predicted. The largest ORF encodes a putative replication initiation protein RepA, which shares 40% sequence similarity with the Rep201 of a theta-replication plasmid pSCM201 recently isolated from Haloarcula, suggesting that pZMX101 might replicate via a theta-type mechanism. Using pZMX101 as the only haloarchaeal replicon, a shuttle vector pZMX108 was constructed and successfully transformed into Haloferax volcanii DS70. Based on this in vivo system, the minimal replicon (1978 bp) of pZMX101 was determined. It is composed of the repA gene plus c. 400-bp upstream and 300-bp downstream sequences. Significantly, the putative replication origin of pZMX101 and that of pSCM201 contain different types of sequence motifs, and these two plasmids exhibit distinct host preference for Haloferax and Haloarcula, respectively.