The effect of supplementation by different nitrogen sources on the production of lactic acid from date juice by Lactobacillus casei subsp. rhamnosus

Production of lactic acid from date juice by fermentation has been studied using Lactobacillus casei subsp. rhamnosus as the producer organism. The optimum substrate concentration, expressed in its glucose content, was 60 g l(-1). Various nitrogen sources were compared with yeast extract in terms of their efficiency for lactic acid production. None of these nitrogen sources gave lactic acid concentrations as high as that obtained with yeast extract. As yeast extract supplementation was not economically attractive, different proportions of (NH4)2SO4 and yeast extract were used. When the elemental nitrogen ratio of(NH4)2SO4 to yeast extract was 4:1, the substrate use and efficiency of lactic acid production were the same as in date juice supplemented with 20 g l(-1) yeast extract (0:5).     

Utilization of by-products derived from bioethanol production process for cost-effective production of lactic acid

The by-products of bioethanol production such as thin stillage (TS) and condensed distillers solubles (CDS) were used as a potential nitrogen source for economical production of lactic acid. The effect of those by-products and their concentrations on lactic acid fermentation were investigated using Lactobacillus paracasei CHB2121. Approximately, 6.7 g/L of yeast extract at a carbon source to nitrogen source ratio of 15 was required to produce 90 g/L of lactic acid in the medium containing 100 g/L of glucose. Batch fermentation of TS medium resulted in 90 g/L of lactic acid after 48 h, and the medium containing 10 % CDS resulted in 95 g/L of lactic acid after 44 h. Therefore, TS and CDS could be considered as potential alternative fermentation medium for the economical production of lactic acid. Furthermore, lactic acid fermentation was performed using only cassava and CDS for commercial production of lactic acid. The volumetric productivity of lactic acid [2.94 g/(L·h)] was 37 % higher than the productivity obtained from the medium with glucose and CDS.     

Biotechnological production of l(+)-lactic acid from wood hydrolyzate by batch fermentation of Enterococcus faecalis

The inhibition of lactic acid fermentation by wood hydrolyzate was decreased (approx. 20%) by adaptation of Enterococcus faecalis RKY1 to wood hydrolyzate-based medium whereby lactic acid productivity and cell growth were enhanced by 0.5 g l(-1) h(-1) and 2.1 g l(-1), respectively. When the diluted or concentrated wood hydrolyzate (equivalent to 25-100 g glucose l(-1)) was supplemented with 15 g yeast extract l(-1), 24-93 g lactic acid l(-1) was produced at a rate between 1.7 g l(-1) h(-1) and 3.2 g l(-1) h(-1).     

Growth and exopolysaccharide production during free and immobilized cell chemostat culture of Lactobacillus rhamnosus RW-9595M

AIMS: Biomass and exopolysaccharide (EPS) production were studied during chemostat cultures in whey permeate medium with Lactobacillus rhamnosus RW-9595M-free cells and cells immobilized on solid porous supports (ImmobaSil). METHODS AND RESULTS: A continuous culture with free cells was conducted for 9 days at dilution rates (D) between 0.3 and 0.8 h(-1) in yeast extract (YE)/mineral supplemented whey permeate. Maximum EPS production (1808 mg l(-1)) and volumetric productivity (542.6 mg l(-1) h(-1)) were obtained for a low D of 0.3 h(-1). A continuous fermentation in a two-stage bioreactor system, composed of a first stage with immobilized cells and a second stage inoculated with free cells produced in the first reactor, was carried out for 32 days. The influence of YE concentration, temperature and dilution rate, and their interactions on biomass, EPS and lactic acid production was investigated. A statistically significant model was found only for lactic acid production. Marked cell morphological and physiological changes led to the formation of very large cell-containing aggregates and a low mean soluble EPS production (138 mg l(-1)). Aggregate volumetric productivity of the two-stage system varied between 5.7 and 49.5 g l(-1) h(-1) for different fermentation conditions and times. Aggregates contained a very high biomass concentration, estimated at 74% of aggregate dry weight by nitrogen analysis and 4.3 x 10(12) CFU g(-1) by a DNA extraction method and a high nonsoluble polysaccharide content (14.2%). At age 24 days, insoluble EPS concentration and volumetric productivity were 1250 mg l(-1) and 2240 mg l(-1) h(-1) respectively. The physiological changes were shown to be reversible when cells were incubated during three successive batch cultures. CONCLUSIONS: EPS production and volumetric productivity during continuous free-cell chemostat cultures with L. rhamnosus RW-9595M are among the highest values reported for lactobacilli in literature. Immobilization and continuous culture resulted in low soluble EPS production and large morphological and physiological changes of L. rhamnosus RW-9595M, with formation of macroscopical aggregates mainly composed of biomass and nonsoluble EPS. SIGNIFICANCE AND IMPACT OF THE STUDY: This is the first study on continuous EPS production by immobilized LAB. Immobilization and culture time-induced cell aggregation and could be used to produce new synbiotic products with very high viable cell and EPS concentrations.     

Production of lactic acid by Lactobacillus rhamnosus with vitamin-supplemented soybean hydrolysate

Batch fermentation studies were performed to evaluate the potentials of a complex nitrogen source, soybean, as an alternative to yeast extract for the economical production of lactic acid by Lactobacillus rhamnosus. An enzyme-hydrolysate of soybean meal, Soytone, with an adequate supplementation of vitamins was found to be highly effective in supporting lactic acid production from glucose and lactose. The effects of seven selected vitamins: d-biotin, pyridoxine, p-aminobenzoic acid, nicotinic acid, thiamine, pantothenic acid, and riboflavin, on cell growth and lactic acid production were investigated to provide the basis for the optimization of vitamin supplementation to minimize the cost. Pantothenic acid was the most required compound while the other six vitamins were also essential for high lactic acid productivity. As a result of the optimization, 15 g/l yeast extract could be successfully replaced with 19.3 g/l Soytone supplemented with the vitamins, resulting in a production of 125 g/l lactic acid from 150 g/l glucose. The volumetric productivity and lactate yield were 2.27 g/l/h and 92%, respectively, which were higher than those with 15 g/l yeast extract. The raw material cost was estimated to be 21.4 cent/kg lactic acid, which was only approximately 41% of that with yeast extract.     

Characterization of ethanol fermentation waste and its application to lactic acid production by Lactobacillus paracasei

In this study, an ethanol fermentation waste (EFW) was characterized for use as an alternative to yeast extract for bulk fermentation processes. EFW generated from a commercial plant in which ethanol is produced from cassava/rice/wheat/barley starch mixtures using Saccharomyces cerevisiae was used for lactic acid production by Lactobacillus paracasei. The effects of temperature, pH, and duration on the autolysis of an ethanol fermentation broth (EFB) were also investigated. The distilled EFW (DEFW) contained significant amounts of soluble proteins (2.91 g/l), nitrogen (0.47 g/l), and amino acids (24.1 mg/l). The autolysis of the EFB under optimum conditions released twice as much amino acids than in the DEFW. Batch fermentation in the DEFW increased the final lactic acid concentration, overall lactic acid productivity, and lactic acid yield on glucose by 17, 41, and 14 %, respectively, in comparison with those from comparable fermentation in a lactobacillus growth medium (LGM) that contained 2 g/l yeast extract. Furthermore, the overall lactic acid productivity in the autolyzed then distilled EFW (ADEFW) was 80 and 27 % higher than in the LGM and DEFW, respectively.     

Simultaneous saccharification and L-(+)-lactic acid fermentation of protease-treated wheat bran using mixed culture of lactobacilli

Protease-treated wheat bran (20% w/v) of particle size less than 300 μm containing 65% (w/w) starch was used for the simultaneous saccharification and l-(+)-lactic acid fermentation by the mixed cultures of Lactobacillus casei and Lactobacillus delbrueckii. Maximum lactate yield after various process optimizations was 123 gl⁻¹ with a productivity of 2.3 gl⁻¹ h⁻¹ corresponding to a conversion of 0.95 g lactic acid per gram starch after 54 h at 37°C. By using protease-treated wheat bran around tenfold decrease in supplementation of the costly medium component, like yeast extract, was achieved together with a considerable increase in the production level.     

Evaluation of plastic-composite supports in repeated fed-batch biofilm lactic acid fermentation by Lactobacillus casei

A customized stirred-tank biofilm reactor was designed for plastic-composite supports (PCS). In repeated-batch studies, the PCS-biofilm reactors outperformed the suspended-cell reactors by demonstrating higher lactic acid productivities (2.45 g l(-1) h(-1) vs 1.75 g l(-1) h(-1)) and greater glucose consumption rates (3.27 g l(-1) h(-1) vs 2.09 g l(-1) h(-1)). In the repeated fed-batch studies, reactors were spiked periodically with concentrated glucose (75%) to maintain a concentration of approximately 80 g of glucose l(-1) in the bioreactor. In suspended-cell fermentations with 10 g of yeast extract (YE) l(-1) and zero, one, two, and three glucose spikes, the lactic acid productivities were 2.64, 1.58, 0.80, and 0.62 g l(-1) h(-1), respectively. In comparison, biofilm reactors with 7 g of YE l(-1) and zero, one, two, and three glucose spikes achieved lactic acid productivities of 4.20, 2.78, 0.66, and 0.94 g l(-1) h(-1), respectively. The use of nystatin (30 U ml(-1)) subdued the contaminating yeast population with no effect on the lactic acid productivity of the biofilm reactors, but it did affect productivity in the suspended-cell bioreactor. Overall, in repeated fed-batch fermentations, the biofilm reactors consistently outperformed the suspended-cell bioreactors, required less YE, and produced up to 146 g of lactic acid l(-1) with 7 g of YE l(-1), whereas the suspended-cell reactor produced 132 g l(-1) with 10 g of YE l(-1).     

Lactic acid fermentation in a recycle batch reactor using immobilized Lactobacillus casei

Lactic acid production by recycle batch fermentation using immobilized cells of Lactobacillus casei subsp. rhamnosus was studied. The culture medium was composed of whey treated with an endoprotease, and supplemented with 2.5 g/L of yeast extract and 0.18 mM Mn(2+) ions. The fermentation set-up comprised of a column packed with polyethyleneimine-coated foam glass particles, Pora-bact A, and connected with recirculation to a stirred tank reactor vessel for pH control. The immobilization of L. casei was performed simply by circulating the culture medium inoculated with the organism over the beads. At this stage, a long lag period preceded the cell growth and lactic acid production. Subsequently, for recycle batch fermentations using the immobilized cells, the reducing sugar concentration of the medium was increased to 100 g/L by addition of glucose. The lactic acid production started immediately after onset of fermentation and the average reactor productivity during repeated cycles was about 4.3 to 4.6 g/L . h, with complete substrate utilization and more than 90% product yield. Sugar consumption and lactate yield were maintained at the same level with increase in medium volume up to at least 10 times that of the immobilized biocatalyst. The liberation of significant amounts of cells into the medium limited the number of fermentation cycles possible in a recycle batch mode. Use of lower yeast extract concentration reduced the amount of suspended biomass without significant change in productivity, thereby also increasing the number of fermentation cycles, and even maintained the D-lactate amount at low levels. The product was recovered from the clarified and decolorized broth by ion-exchange adsorption. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 55:841-853, 1997.     

Optimization of L-(+)-lactic acid production by ring and disc plastic composite supports through repeated-batch biofilm fermentation.

Four customized bioreactors, three with plastic composite supports (PCS) and one with suspended cells (control), were operated as repeated-batch fermentors for 66 days at pH 5 and 37 degrees C. The working volume of each customized reactor was 600 ml, and each reactor's medium was changed every 2 to 5 days for 17 batches. The performance of PCS bioreactors in long-term biofilm repeated-batch fermentation was compared with that of suspended-cell bioreactors in this research. PCS could stimulate biofilm formation, supply nutrients to attached and free suspended cells, and reduce medium channelling for lactic acid production. Compared with conventional repeated-batch fermentation, PCS bioreactors shortened the lag time by threefold (control, 11 h; PCS, 3.5 h) and sixfold (control, 9 h; PCS, 1.5 h) at yeast extract concentrations of 0.4 and 0.8% (wt/vol), respectively. They also increased the lactic acid productivity of Lactobacillus casei subsp. rhamnosus (ATCC 11443) by 40 to 70% and shortened the total fermentation time by 28 to 61% at all yeast extract concentrations. The fastest productivity of the PCS bioreactors (4.26 g/liter/h) was at a starting glucose concentration of 10% (wt/vol), whereas that of the control (2.78 g/liter/h) was at 8% (wt/vol). PCS biofilm lactic acid fermentation can drastically improve the fermentation rate with reduced complex-nutrient addition.     

Production of succinic acid and lactic acid by Corynebacterium crenatum under anaerobic conditions

A new succinic acid and lactic acid production bioprocess by Corynebacterium crenatum was investigated in mineral medium under anaerobic conditions. Corynebacterium crenatum cells with sustained acid production ability and high acid volumetric productivity harvested from the glutamic acid fermentation broth were used to produce succinic acid and lactic acid. Compared with the first cycle, succinic acid production in the third cycle increased 120% and reached 43.4 g/L in 10 h during cell-recycling repeated fermentations. The volumetric productivities of succinic acid and lactic acid could maintain above 4.2 g/(L·h) and 3.1 g/(L·h), respectively, for at least 100 h. Moreover, wheat bran hydrolysates could be used for succinic acid and lactic acid production by the recycled C. crenatum cells. The final succinic acid concentration reached 43.6 g/L with a volumetric productivity of 4.36 g/(L·h); at the same time, 32 g/L lactic acid was produced.     

L-lactic acid production by Lactobacillus casei fermentation with corn steep liquor-supplemented acid-hydrolysate of soybean meal

Batch and fed-batch fermentation studies were performed to evaluate the potential of corn steep liquor (CSL)-supplemented acid-hydrolysate of soybean meal (AHSM) as an alternative to yeast extract (YE) for the production of L-lactic acid by Lactobacillus casei LA-04-1. The CSL-supplemented AHSM gave an outstanding result in supporting L-lactic acid production from glucose. In the exponential fed-batch fermentation, the concentration, yield and productivity of L-lactic acid were 162.5 g/L, 89.7% and 1.69 g/L per h, respectively, which were lower than those with 20 g/L YE (180 g/L, 90.3%, 2.14 g/L per h) after 96 h of fermentation. However, the raw material cost of the nitrogen resource was estimated as only 25% of that using the YE.     

高糖和氮源对鼠李糖乳杆菌(Lactobacillus rhamnosus)L-乳酸发酵的影响

鼠李糖乳杆菌经实验室耐高糖高酸选育,能够在高糖浓度下高效高产L-乳酸。以酵母粉为氮源和生长因子,葡萄糖初始浓度分别为120 g/L和146 g/L,摇瓶培养120h,L-乳酸产量分别为104g/L和117.5g/L,L-乳酸得率分别为86.7%和80.5%。高葡萄糖浓度对菌的生长和乳酸发酵有一定的抑制。增加接种量,在高糖浓度发酵条件下,可以缩短发酵时间,但对增加乳酸产量效果不明显。乳酸浓度对鼠李糖乳杆菌生长和产酸有显著的影响。初始乳酸浓度到达70g/L以上时,鼠李糖乳杆菌基本不生长和产酸,葡萄糖消耗也被抑制。酵母粉是鼠李糖乳杆菌的优良氮源,使用其它被测试的氮源菌体生长和产酸都有一定程度的下降。用廉价的黄豆粉并补充微量维生素液,替代培养基中的酵母粉,可以使产酸浓度和碳源得率得以基本维持。     

Coupled lactic acid fermentation and adsorption

Polyvinylpyridine (PVP) and activated carbon were evaluated for coupled lactic acid fermentation and adsorption, to prevent the product concentration from reaching inhibitory levels. The lactic acid production doubled as a result of periodical circulation of the fermentation broth through a PVP adsorption column. The adsorbent was then regenerated and the adsorbed lactate harvested, by passing 0.1 N NaOH through the column. However, each adsorption-regeneration cycle caused about 14% loss of the adsorption capacity, thus limiting the practical use of this rather expensive adsorbent. Activated carbon was found much more effective than PVP in lactic acid and lactate adsorption. The cells of Lactobacillus delbrueckii subsp. delbrueckii (LDD) also had strong tendency to adsorb on the carbon. A study was therefore conducted using an activated carbon column for simultaneous cell immobilization and lactate adsorption, in a semi-batch process with periodical medium replacement. The process produced lactate steadily at about 1.3 g l(-1)h(-1) when the replacement medium contained at least 2 g l(-1) of yeast extract. The production, however, stopped after switching to a medium without yeast extract. Active lactic acid production by LDD appeared to require yeast extract above a certain critical level (<2 g l(-1)).     

Production of lactic acid and fructose from media with cane sugar using mutant of Lactobacillus delbrueckii NCIM 2365

AIMS: To examine the potential of Lactobacillus delbrueckii mutant, Uc-3 to produce lactic acid and fructose from sucrose-based media. METHODS AND RESULTS: The mutant of L. delbrueckii NCIM 2365 was cultivated in shake flask containing hydrolysed cane sugar (sucrose)-based medium. The lactic acid yield and volumetric productivity with hydrolysed cane concentration up to 200 g l(-1) were in the range of 92-97% of the theoretical value and between 2.7 and 3.8 g l(-1) h(-1), respectively. The fructose fraction of the syrup produced was more than 95% when the total initial sugar concentration in the medium was higher (150-200 g l(-1)). There are no unwanted byproducts detected in the fermentation broth. CONCLUSIONS: We demonstrated that L. delbrueckii mutant Uc-3 was able to utilize glucose preferentially to produce lactic acid and fructose from hydrolysed cane sugar in batch fermentation process. SIGNIFICANCE AND IMPACT OF THE STUDY: These findings will be useful in the production of lactic acid and high fructose syrups using media with high concentrations of sucrose-based raw materials. This approach can lead to modification of the traditional fermentation processes to obtain value-added byproducts, attaining better process economics.     

Production of lactic acid with loofa sponge immobilized Rhizopus oryzae RBU2-10

Lactic acid production by Rhizopus oryzae RBU2-10 immobilized in loofa sponge was evaluated. Shape and texture of loofa sponge, which was obtained from the mature dried fruit of Luffa cylindrica, remained intact after its treatment with buffers of varying pH and following its repeated autoclaving for up to four cycles (121 degrees C, 20 min per cycle). The medium having four pieces of loofa sponge (1.008 cm(3)) per 100 ml medium and inoculated with 3 x1 0(6) spores ml(-1) resulted maximum production (80.75 g l(-1)) of lactic acid in 48 h of fermentation. Repeated batch fermentation for lactic acid production could be carried out for 10 cycles. Remarkably higher levels of productivity (1.66-1.84 g l(-1)h(-1)) was obtained during first five cycles of fermentation with a maximum productivity (1.84 g l(-1)h(-1)) obtained during third cycle of fermentation.     

Production of L(+)-lactic acid from glucose and starch by immobilized cells of Rhizopus oryzae in a rotating fibrous bed bioreactor

A rotating fibrous-bed bioreactor (RFB) was developed for fermentation to produce L(+)-lactic acid from glucose and cornstarch by Rhizopus oryzae. Fungal mycelia were immobilized on cotton cloth in the RFB for a prolonged period to study the fermentation kinetics and process stability. The pH and dissolved oxygen concentration (DO) were found to have significant effects on lactic acid productivity and yield, with pH 6 and 90% DO being the optimal conditions. A high lactic acid yield of 90% (w/w) and productivity of 2.5 g/L.h (467 g/h.m(2)) was obtained from glucose in fed-batch fermentation. When cornstarch was used as the substrate, the lactic acid yield was close to 100% (w/w) and the productivity was 1.65 g/L.h (300 g/h.m(2)). The highest concentration of lactic acid achieved in these fed-batch fermentations was 127 g/L. The immobilized-cells fermentation in the RFB gave a virtually cell-free fermentation broth and provided many advantages over conventional fermentation processes, especially those with freely suspended fungal cells. Without immobilization with the cotton cloth, mycelia grew everywhere in the fermentor and caused serious problems in reactor control and operation and consequently the fermentation was poor in lactic acid production. Oxygen transfer in the RFB was also studied and the volumetric oxygen transfer coefficients under various aeration and agitation conditions were determined and then used to estimate the oxygen transfer rate and uptake rate during the fermentation. The results showed that the oxygen uptake rate increased with increasing DO, indicating that oxygen transfer was limited by the diffusion inside the mycelial layer.     

Optimization of the conditions of the fermentation of beet molasses to lactic acid by Lactobacillus delbrueckii

Optimization studies were carried out for the production of L-lactic acid from the fermentation of beet molasses by Lactobacillus delbrueckii. A Central Composite Design was used to determine the optimum values of the process variables (temperature, pH, inoculum concentration, and initial sucrose concentration) for obtaining the maximum yield and the maximum volumetric productivity of lactic acid. Among the variables selected for study, it was found that all of them apart from the temperature significantly affected the responses (yield and volumetric productivity of lactic acid). The Central Composite Design also permitted formulating two second-order polynomial empirical models relating to the responses and the significant variables. From these models it was possible to determine the value of the variables giving the maximum yield of lactic acid production (87.8%) and the maximum volumetric rate of lactic acid biosynthesis (2.7 g/l · h). Finally, the dependence of the lactic acid yield and productivity on the model variables was investigated. All conclusions are restricted to the experimental range studied.     

Growth and lactic acid production by Lactobacillus casei ssp. rhamnosus in batch and membrane bioreactor: influence of yeast extract and Tryptone enrichment

Enrichment of the medium with yeast extract (20 g.l ) and Tryptone (40 g.l ) increased the growth of Lactobacillus casei ssp. rhamnosusand its production of lactic acid in both batch and cell-recycle cultures without affecting glucose consumption and the lactic acid production rate.     

Continuous alpha-amylase production using Bacillus amyloliquefaciens adsorbed on an ion exchange resin

Summary A method for the continuous production of extracellular alpha amylase by surface immobilized cells of Bacillus amyloliquefaciens NRC 2147 has been developed. A large-pore, macroreticular anionic exchange resin was capable of initially immobilizing an effective cell concentration of 17.5 g DW/1 (based on a total reactor volume of 160 ml). The reactor was operated continuously with a nutrient medium containing 15 g/l soluble starch, as well as yeast extract and salts. Aeration was achieved by sparging oxygen enriched air into the column inlet. Fermentor plugging by cells was avoided by periodically substituting the nutrient medium with medium lacking in both soluble starch and yeast extract. This fermentor was operated for over 200 h and obtained a steady state enzyme concentration of 18700 amylase activity units per litre (18.7 kU/l), and an enzyme volumetric productivity of 9700 amylase activity units per litre per hour (9.7 kU/l-h). Parallel fermentations were performed using a 2 l stirred vessel fermentor capable of operation in batch and continuous mode. All fermentation conditions employed were identical to those of the immobilized cell experiments in order to assess the performance of the immobilized cell reactor. Batch stirred tank operation yielded a maximum amylase activity of 150 kU/l and a volumetric productivity of 2.45 kU/l-h. The maximum cell concentration obtained was 5.85 g DW/l. Continuous stirred tank fermentation obtained a maximum effluent amylase activity of 6.9 kU/l and a maximum enzyme volumetric productivity of 2.73 kU/l-h. Both of these maximum values were observed at a dilution rate of 0.345 l/h. The immobilized cell reactor was observed to achieve larger volumetric productivities than either mode of stirred tank fermentation, but achieved an enzyme activity concentration lower than that of the batch stirred tank fermentor.