Alteration Young’s moduli by protein 4.1 phosphorylation play a potential role in the deformability development of vertebrate erythrocytes

The mechanical properties of vertebrate erythrocytes depend on their cytoskeletal protein networks. Membrane skeleton proteins spectrin and protein 4.1 (4.1R) cross-link with actin to maintain membrane stability under mechanical stress. Phosphorylation of 4.1R alters the affinity of 4.1R for spectrin–actin binding and this modulates the mechanical properties of human erythrocytes. In this study, phorbol 12-myristate-13-acetate (PMA)-induced phosphorylation of 4.1R was tested, erythrocyte deformability was determined and the erythrocyte elastic modulus was detected in human, chick, frog and fish. Furthermore, amino acid sequences of the functionally important domains of 4.1R were analyzed. Results showed that PMA-induced phosphorylation of 4.1R decreased erythrocyte deformability and this property was stable after 1 h. The values of Young’s modulus alteration gradually decreased from human to fish (0.388±0.035 kPa, 0.219±0.022 kPa, 0.191±0.036 kPa and 0.141±0.007 kPa). Ser-312 and Ser-331 are located within the consensus sequence recognized by protein kinase C (PKC); however, Ser-331 in zebrafish was replaced by Ala-331. The sequence of the 8 aa motif from vertebrate 4.1R showed only one amino acid mutation in frog and numerous substitutions in fish. Analyses of Young’s modulus suggested that the interaction between 4.1R with the spectrin–actin binding domain may have a special relationship with the development of erythrocyte deformability. In addition, amino acid mutations in 4.1R further supported this relationship. Thus, we hypothesize that alteration of membrane skeleton protein binding affinity may play a potential role in the development of erythrocyte deformability, and alteration of Young’s modulus values may provide a method for determining the deformability development of vertebrate erythrocytes.     

Modulating Human Mesenchymal Stem Cell Plasticity Using Micropatterning Technique

In our previous work, we have reported that enforced elongation of human mesenchymal stem cells (hMSCs) through micropatterning promoted their myocardial lineage commitment. However, whether this approach is robust enough to retain the commitment when subsequently subjected to different conditions remains unsolved. This de-differentiation, if any, would have significant implication on the application of these myocardial-like hMSCs either as tissue engineered product or in stem cell therapy. Herein, we investigated the robustness of micropatterning induced differentiation by evaluating the retention of myocardial differentiation in patterned hMSCs when challenged with non-myocardial differentiation cues. Altogether, we designed four groups of experiments; 1) Patterned hMSCs cultured in normal growth medium serving as a positive control; 2) Patterned hMSCs cultured in normal growth medium for 14 days followed by osteogenic and adipogenic media for next 7 days (to study the robustness of the effect of micropatterning); 3) Patterned hMSCs (initially grown in normal growth medium for 14 days) trypsinized and recultured in different induction media for next 7 days (to study the robustness of the effect of micropatterning without any shape constrain) and 4) Patterned hMSCs cultured in osteogenic and adipogenic media for 14 days (to study the effects of biochemical cues versus biophysical cues). It was found that hMSCs that were primed to commit to myocardial lineage (Groups 2 and 3) were able to maintain myocardial lineage commitment despite subsequent culturing in osteogenic and adipogenic media. However, for hMSCs that were not primed (Group 4), the biochemical cues seem to dominate over the biophysical cue in modulating hMSCs differentiation. It demonstrates that cell shape modulation is not only capable of inducing stem cell differentiation but also ensuring the permanent lineage commitment.     

Quantitative investigation of calcimimetic R568 on beta cell adhesion and mechanics using AFM single-cell force spectroscopy

In this study we use a novel approach to quantitatively investigate mechanical and interfacial properties of clonal β-cells using AFM-Single Cell Force Spectroscopy (SCFS). MIN6 cells were incubated for 48 h with 0.5 mM Ca²⁺ ± the calcimimetic R568 (1 μM). AFM-SCFS adhesion and indentation experiments were performed by using modified tipless cantilevers. Hertz contact model was applied to analyse force–displacement (F–d) curves for determining elastic or Young’s modulus (E). Our results show CaSR-evoked increases in cell-to-cell adhesion parameters and E modulus of single cells, demonstrating that cytomechanics have profound effects on cell adhesion characterization.     

Thickness sensing of hMSCs on collagen gel directs stem cell fate

Mechanically compliant substrate provides crucial biomechanical cues for multipotent stem cells to regulate cellular fates such as differentiation, proliferation and maintenance of their phenotype. Effective modulus of which cells sense is not only determined by intrinsic mechanical properties of the substrate, but also the thickness of substrate. From our study, it was found that interference from underlying rigid support at hundreds of microns away could induce significant cellular response. Human mesenchymal stem cells (hMSCs) were cultured on compliant biological gel, collagen type I, of different thickness but identical ECM composition and local stiffness. The cells sensed the thin gel (130 μm) as having a higher effective modulus than the thick gel (1440 μm) and this was reflected in their changes in morphology, actin fibers structure, proliferation and tissue specific gene expression. Commitment into neuronal lineage was observed on the thin gel only. Conversely, the thick gel (1440 μm) was found to act like a substrate with lower effective modulus that inhibited actin fiber polymerization. Stem cells on the thick substrate did not express tissue specific genes and remained at their quiescent state. This study highlighted the need to consider not only the local modulus but also the thickness of biopolymer gel coating during modulation of cellular responses.     

Altered osteogenic commitment of human mesenchymal stem cells by ERM protein-dependent modulation of cellular biomechanics

Cellular mechanics is known to play an important role in many cellular functions including adhesion, migration, proliferation, and differentiation. Human mesenchymal stem cells (hMSCs) demonstrate unique mechanical properties distinct from fully differentiated cells. This observation suggests that the stem cell mechanics may be modulated to regulate the hMSCs' lineage commitment. Specifically, ERM (ezrin, radixin, moesin) proteins are known to mediate the membrane-cytoskeleton adhesion, cell elasticity, actin cytoskeleton organization, and therefore could serve as potential targets for modulation of the cellular mechanics. Combining silencing RNA, atomic force microscopy, and laser optical tweezers, the role of the ERM proteins involved in the regulation of stem cell biomechanics and osteogenic differentiation was quantitatively determined. Transient ERM knockdown by RNAi causes disassembly of actin stress fibers and focal adhesions, a decrease in the cell stiffness, and membrane separation from the cytoskeleton. The silencing RNA treatment not only induced mechanical changes in stem cells but impaired biochemically-directed osteogenic differentiation. The intact actin cytoskeleton and focal adhesions of hMSCs appear critical for the osteogenic induction. Thus, ERM knockdown modulates the dynamics of cell mechanical changes during hMSC differentiation and regulates the expression of tissue specific molecular markers. These findings are of particular interest for modulation of the cellular biomechanics to control hMSCs' activities and fate in tissue engineering, regenerative medicine, and other stem cell-based therapeutic applications.     

Micropatterned matrix directs differentiation of human mesenchymal stem cells towards myocardial lineage

Stem cell response can be influenced by a multitude of chemical, topological and mechanical physiochemical cues. While extensive studies have been focused on the use of soluble factors to direct stem cell differentiation, there are growing evidences illustrating the potential to modulate stem cell differentiation via precise engineering of cell shape. Fibronectin were printed on poly(lactic-co-glycolic acid) (PLGA) thin film forming spatially defined geometries as a means to control the morphology of bone marrow derived human mesenchymal stem cells (hMSCs). hMSCs that were cultured on unpatterned substrata adhered and flattened extensively (∼ 10,000 μm²) while cells grown on 20 μm micropatterend wide adhesive strips were highly elongated with much smaller area coverage of ∼ 2000 μm². Gene expression analysis revealed up-regulation of several hallmark markers associated to neurogenesis and myogenesis for cells that were highly elongated while osteogenic markers were specifically down-regulated or remained at its nominal level. Even though there is clearly upregulated levels of both neuronal and myogenic lineages but at the functionally relevant level of protein expression, the myogenic lineage is dominant within the time scale studied as determined by the exclusive expression of cardiac myosin heavy chain for the micropatterned cells. Enforced cell shape distortion resulting in large scale rearrangement of cytoskeletal network and altered nucleus shape has been proposed as a physical impetus by which mechanical deformation is translated into biochemical response. These results demonstrated for the first time that cellular shape modulation in the absence of any induction factors may be a viable strategy to coax lineage-specific differentiation of stem cells.     

Development of a rapid culture method to induce adipocyte differentiation of human bone marrow-derived mesenchymal stem cells

Human mesenchymal stem cells (hMSCs) derived from bone marrow are multipotent stem cells that can regenerate mesenchymal tissues such as adipose, bone or muscle. It is thought that hMSCs can be utilized as a cell resource for tissue engineering and as human models to study cell differentiation mechanisms, such as adipogenesis, osteoblastogenesis and so on. Since it takes 2-3 weeks for hMSCs to differentiate into adipocytes using conventional culture methods, the development of methods to induce faster differentiation into adipocytes is required. In this study we optimized the culture conditions for adipocyte induction to achieve a shorter cultivation time for the induction of adipocyte differentiation in bone marrow-derived hMSCs. Briefly, we used a cocktail of dexamethasone, insulin, methylisobutylxanthine (DIM) plus a peroxisome proliferator-activated receptor γ agonist, rosiglitazone (DIMRo) as a new adipogenic differentiation medium. We successfully shortened the period of cultivation to 7-8 days from 2-3 weeks. We also found that rosiglitazone alone was unable to induce adipocyte differentiation from hMSCs in vitro. However, rosiglitazone appears to enhance hMSC adipogenesis in the presence of other hormones and/or compounds, such as DIM. Furthermore, the inhibitory activity of TGF-β1 on adipogenesis could be investigated using DIMRo-treated hMSCs. We conclude that our rapid new culture method is very useful in measuring the effect of molecules that affect adipogenesis in hMSCs.     

Changes in the stiffness of human mesenchymal stem cells with the progress of cell death as measured by atomic force microscopy

This note reports observations of the change of stiffness of human mesenchymal stem cells (hMSCs) with the progress of cell death as measured by AFM. hMSC with impaired membrane, dead and viable cells were labelled with Annexin V and Propidium Iodide after 24 h cold storage, followed by AFM measurement and Young's modulus of cells was derived. Viable hMSCs have a Young's modulus (E) in the range of 0.81–1.13 kPa and consistent measurement was observed when different measurement locations were chosen. E of cells with partially impaired membrane was 0.69±0.17 kPa or in the range of 2.04–4.74 kPa, depending upon the measurement locations. With the loss of membrane integrity, though there was no variation on measured E between different locations, a mixed picture of cell stiffness was observed as indicated by cells with E as low as 0.09±0.03 kPa, in a mid-range of 4.62±0.67 kPa, and the highest of up to 48.98±19.80 kPa. With the progress of cell death, the highest stiffness was noticed for cells showing a more granular appearance; also the lowest stiffness for cells with vacuole appearance. Findings from this study indicate that cell stiffness is significantly altered with the progress of cell death.     

Substrate modulus directs neural stem cell behavior

Although biochemical signals that modulate stem cell self-renewal and differentiation were extensively studied, only recently were the mechanical properties of a stem cell's microenvironment shown to regulate its behavior. It would be desirable to have independent control over biochemical and mechanical cues, to analyze their relative and combined effects on stem-cell function. We developed a synthetic, interfacial hydrogel culture system, termed variable moduli interpenetrating polymer networks (vmIPNs), to assess the effects of soluble signals, adhesion ligand presentation, and material moduli from 10-10,000 Pa on adult neural stem-cell (aNSC) behavior. The aNSCs proliferated when cultured in serum-free growth media on peptide-modified vmIPNs with moduli of ≥100 Pa. In serum-free neuronal differentiation media, a peak level of the neuronal marker, β-tubulin III, was observed on vmIPNs of 500 Pa, near the physiological stiffness of brain tissue. Furthermore, under mixed differentiation conditions with serum, softer gels (∼100-500 Pa) greatly favored neurons, whereas harder gels (∼1,000-10,000 Pa) promoted glial cultures. In contrast, cell spreading, self-renewal, and differentiation were inhibited on substrata with moduli of ∼10 Pa. This work demonstrates that the mechanical and biochemical properties of an aNSC microenvironment can be tuned to regulate the self-renewal and differentiation of aNSCs.     

Uncomplicated differentiation of stem cells into bipolar neurons and myelinating glia

Epidermal neural crest stem cells (EPI-NCSCs), derived from the bulge of hair follicles, appear to be promising donor stem cell candidates. In the current work, EPI-NCSCs were harvested from rodents and humans. Isolation procedures revealed high levels of nestin-positive neural stem cells and the percentage of human neural stem cells (95 ± 0.6%) is even higher than the percentage found in cultures of hair follicles from rodents (90 ± 0.9%). Furthermore, differentiation of EPI-NCSCs into bipolar neurons, myelinating Schwann cells and oligodendrocytes occurred by applying a simple and straightforward method. Bipolar neurons could be obtained by culturing on a collagen matrix and are of great interest for auditory neuron regeneration since auditory neurons are bipolar.We propose that this type of stem cells, would make an excellent model for autologous transplantation and offers great potential for neural regeneration in diseases, such as Parkinson’s and Alzheimer’s disease.     

Modulation of cellular mechanics during osteogenic differentiation of human mesenchymal stem cells

Recognition of the growing role of human mesenchymal stem cells (hMSC) in tissue engineering and regenerative medicine requires a thorough understanding of intracellular biochemical and biophysical processes that may direct the cell's commitment to a particular lineage. In this study, we characterized the distinct biomechanical properties of hMSCs, including the average Young's modulus determined by atomic force microscopy (3.2 +/- 1.4 kPa for hMSC vs. 1.7 +/- 1.0 kPa for fully differentiated osteoblasts), and the average membrane tether length measured with laser optical tweezers (10.6 +/- 1.1 microm for stem cells, and 4.0 +/- 1.1 microm for osteoblasts). These differences in cell elasticity and membrane mechanics result primarily from differential actin cytoskeleton organization in these two cell types, whereas microtubules did not appear to affect the cellular mechanics. The membrane-cytoskeleton linker proteins may contribute to a stronger interaction of the plasma membrane with F-actins and shorter membrane tether length in osteoblasts than in stem cells. Actin depolymerization or ATP depletion caused a two- to threefold increase in the membrane tether length in osteoblasts, but had essentially no effect on the stem-cell membrane tethers. Actin remodeling in the course of a 10-day osteogenic differentiation of hMSC mediates the temporally correlated dynamical changes in cell elasticity and membrane mechanics. For example, after a 10-day culture in osteogenic medium, hMSC mechanical characteristics were comparable to those of mature bone cells. Based on quantitative characterization of the actin cytoskeleton remodeling during osteodifferentiation, we postulate that the actin cytoskeleton plays a pivotal role in determining the hMSC mechanical properties and modulation of cellular mechanics at the early stage of stem-cell osteodifferentiation.     

Characterization of cell signaling,morphology, and differentiation potential of human mesenchymal stem cells based on cell adhesion mechanism

It is essential to characterize the cellular properties of mesenchymal stem cell populations to maintain quality specifications and control in regenerative medicine. Biofunctional materials have been designed as artificial matrices for the stimulation of cell adhesion and specific cellular functions. We have developed recombinant maltose-binding protein (MBP)-fused proteins as artificial adhesion matrices to control human mesenchymal stem cell (hMSC) fate by using an integrin-independent heparin sulfate proteoglycans-mediated cell adhesion. In this study, we characterize cell adhesion-dependent cellular behaviors of human adipose-derived stem cells (hASCs) and human bone marrow stem cells (hBMSCs). We used an MBP-fused basic fibroblast growth factor (MF)-coated surface and fibronectin (FN)-coated surface to restrict and support, respectively, integrin-mediated adhesion. The cells adhered to MF exhibited restricted actin cytoskeleton organization and focal adhesion kinase phosphorylation. The hASCs and hBMSCs exhibited different cytoplasmic projection morphologies on MF. Both hASCs and hBMSCs differentiated more dominantly into osteogenic cells on FN than on MF. In contrast, hASCs differentiated more dominantly into adipogenic cells on MF than on FN, whereas hBMSCs differentiated predominantly into adipogenic cells on FN. The results indicate that hASCs exhibit a competitive differentiation potential (osteogenesis vs. adipogenesis) that depends on the cell adhesion matrix, whereas hBMSCs exhibit both adipogenesis and osteogenesis in integrin-mediated adhesion and thus hBMSCs have noncompetitive differentiation potential. We suggest that comparing differentiation behaviors of hMSCs with the diversity of cell adhesion is an important way to characterize hMSCs for regenerative medicine.     

Human Primary Immune Cells Exhibit Distinct Mechanical Properties that Are Modified by Inflammation

T lymphocytes are key modulators of the immune response. Their activation requires cell-cell interaction with different myeloid cell populations of the immune system called antigen-presenting cells (APCs). Although T lymphocytes have recently been shown to respond to mechanical cues, in particular to the stiffness of their environment, little is known about the rigidity of APCs. In this study, single-cell microplate assays were performed to measure the viscoelastic moduli of different human myeloid primary APCs, i.e., monocytes (Ms, storage modulus of 520 +90/−80 Pa), dendritic cells (DCs, 440 +110/−90 Pa), and macrophages (MPHs, 900 +110/−100 Pa). Inflammatory conditions modulated these properties, with storage moduli ranging from 190 Pa to 1450 Pa. The effect of inflammation on the mechanical properties was independent of the induction of expression of commonly used APC maturation markers, making myeloid APC rigidity an additional feature of inflammation. In addition, the rigidity of human T lymphocytes was lower than that of all myeloid cells tested and among the lowest reported (Young’s modulus of 85 ± 5 Pa). Finally, the viscoelastic properties of myeloid cells were dependent on both their filamentous actin content and myosin IIA activity, although the relative contribution of these parameters varied within cell types. These results indicate that T lymphocytes face different cell rigidities when interacting with myeloid APCs in vivo and that this mechanical landscape changes under inflammation.     

Evaluation of Stem Cell-to-Tenocyte Differentiation By Atomic Force Microscopy to Measure Cellular Elastic Moduli

In the present study, we evaluated whether stem cell-to-tenocyte differentiation could be evaluated via measurement of the mechanical properties of the cell. We used mechanical uniaxial cyclic stretching to induce the differentiation of human bone marrow mesenchymal stem cells into tenocytes. The cells were subjected to cyclic elongation of 10 or 15 % at a cyclic frequency of 1 Hz for 24 or 48 h, and differentiation was assessed by real-time PCR (rtPCR) determination of messenger RNA expression levels for four commonly used markers of stem cell-to-tenocyte differentiation: type I collagen, type III collagen, tenascin-C, and scleraxis. The rtPCR results showed that cells subjected to 10 % cyclic elongation for 24 or 48 h differentiated into tenocytes. Atomic force microscopy (AFM) was then used to measure the force curves around the cell nuclei, and the AFM data were used to calculate the elastic moduli of the cell surfaces. The elastic modulus values of the control (non-stretched) cells differed significantly from those of cells stretched at 10 % for 24 or 48 h (P < 0.01). Confocal fluorescence microscopic observations of actin stress fibers suggested that the change in elastic modulus was ascribable to the development of the cellular cytoskeleton during the differentiation process. Therefore, we conclude that the atomic force microscopic measurement of the elastic modulus of the cell surface can be used to evaluate stem cell-to-tenocyte differentiation.